igt@i915_selftest@live@gt_contexts on fi-apl-guc@linus-v6.7 Test details

Detail	Value
Duration	1.82 seconds
Igt-Version	IGT-Version: 1.28-g5652fea13 (x86_64) (Linux: 6.7.0-linus-v6.7-g0dd3ee311255+ x86_64)
Out	Starting dynamic subtest: gt_contexts Dynamic subtest gt_contexts: SUCCESS (1.822s)
Err	Starting dynamic subtest: gt_contexts Dynamic subtest gt_contexts: SUCCESS (1.822s)
Dmesg	<6> [299.453622] [IGT] i915_selftest: starting dynamic subtest gt_contexts <5> [299.741063] Setting dangerous option enable_guc - tainting kernel <5> [299.741080] Setting dangerous option enable_guc - tainting kernel <5> [299.741094] Setting dangerous option live_selftests - tainting kernel <7> [299.869755] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [299.870786] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [299.871416] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [299.871470] i915 0000:00:02.0: [drm:intel_detect_pch [i915]] No PCH found. <7> [299.872090] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [299.873238] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [299.875022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 266667 kHz <7> [299.876256] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [299.876897] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [299.877473] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [299.877995] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [299.878011] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [299.879176] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [299.879267] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [299.879975] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [299.881197] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79871018 <7> [299.881971] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [299.882629] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [299.883184] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [299.883881] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7> [299.884534] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] CH1 DIMM size: 32 Gb, width: X8, ranks: 1, type: DDR3 <7> [299.885038] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] CH2 DIMM size: 32 Gb, width: X8, ranks: 1, type: DDR3 <7> [299.885638] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [299.886130] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [299.887806] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz <7> [299.888500] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT BROXTON ", BDB version 207 <7> [299.889128] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [299.889798] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [299.890441] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [299.891066] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [299.891816] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [299.892460] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [299.893085] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [299.893808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [299.894446] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [299.895046] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [299.895765] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [299.896399] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [299.896979] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [299.897664] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [299.898284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [299.898948] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [299.899562] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:1 USB-Type-C:0 TBT:0 DSC:0 <7> [299.900149] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7> [299.900837] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [299.901448] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0 <7> [299.902036] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 09 <7> [299.902706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [299.903545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [299.904233] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 144000 kHz, VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6 <7> [299.904901] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [299.905738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [299.906331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [299.906987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [299.907652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [299.908502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a <7> [299.909153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] DDI PHY 1 already enabled, won't reprogram it <7> [299.909836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc <7> [299.910539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] DDI PHY 0 already enabled, won't reprogram it <7> [299.911222] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/bxt_dmc_ver1_07.bin <6> [299.915268] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled <7> [299.915283] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 <6> [299.916030] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7) <7> [299.916642] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 0 us <7> [299.917497] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7> [299.918067] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 7 (7.0 usec) <7> [299.918699] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 8 (8.0 usec) <7> [299.919245] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 22 (22.0 usec) <7> [299.919967] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 22 (22.0 usec) <7> [299.920579] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 22 (22.0 usec) <7> [299.921129] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 22 (22.0 usec) <7> [299.921739] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 22 (22.0 usec) <7> [299.926375] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [299.929923] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 144000 kHz, VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6 <7> [299.930660] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 624000 kHz <7> [299.931240] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 624000 kHz <7> [299.931882] i915 0000:00:02.0: [drm:intel_ddi_init [i915]] VBT says port B has lspcon <7> [299.932568] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI B/PHY B] Using AUX CH B (VBT) <7> [299.933196] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:110:DDI B/PHY B] <7> [299.934921] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [299.935608] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:122:DDI C/PHY C] Using AUX CH C (VBT) <7> [299.936256] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:122:DDI C/PHY C] <7> [299.937751] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [299.938317] i915 0000:00:02.0: [drm:vlv_dsi_init [i915]] <7> [299.940233] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled <7> [299.940990] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe B] hw state readout: disabled <7> [299.942033] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled <7> [299.942743] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [299.943996] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [299.944674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:plane 3A] hw state readout: disabled, pipe A <7> [299.945271] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:cursor A] hw state readout: disabled, pipe A <7> [299.945984] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B <7> [299.946645] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B <7> [299.947250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 3B] hw state readout: disabled, pipe B <7> [299.947912] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:cursor B] hw state readout: disabled, pipe B <7> [299.948598] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:plane 1C] hw state readout: disabled, pipe C <7> [299.949208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:97:plane 2C] hw state readout: disabled, pipe C <7> [299.949874] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:105:cursor C] hw state readout: disabled, pipe C <7> [299.950534] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI B/PHY B] hw state readout: disabled, pipe A <7> [299.951091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST A] hw state readout: disabled, pipe A <7> [299.951770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DP-MST B] hw state readout: disabled, pipe B <7> [299.952332] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:114:DP-MST C] hw state readout: disabled, pipe C <7> [299.953005] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DDI C/PHY C] hw state readout: disabled, pipe A <7> [299.953626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:124:DP-MST A] hw state readout: disabled, pipe A <7> [299.954192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:125:DP-MST B] hw state readout: disabled, pipe B <7> [299.954882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:126:DP-MST C] hw state readout: disabled, pipe C <7> [299.955528] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL A hw state readout: pipe_mask 0x0, on 0 <7> [299.956121] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL B hw state readout: pipe_mask 0x0, on 0 <7> [299.956835] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL C hw state readout: pipe_mask 0x0, on 0 <7> [299.957653] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:DP-1] hw state readout: disabled <7> [299.958284] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:DP-2] hw state readout: disabled <7> [299.958926] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [299.959569] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [299.960141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:plane 3A] min_cdclk 0 kHz <7> [299.960762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:cursor A] min_cdclk 0 kHz <7> [299.961333] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [299.962028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz <7> [299.962665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz <7> [299.963210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 3B] min_cdclk 0 kHz <7> [299.963836] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:cursor B] min_cdclk 0 kHz <7> [299.964419] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [299.965013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:plane 1C] min_cdclk 0 kHz <7> [299.965678] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:97:plane 2C] min_cdclk 0 kHz <7> [299.966254] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:105:cursor C] min_cdclk 0 kHz <7> [299.966883] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [299.967593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state] <7> [299.968161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe B] enable: no [setup_hw_state] <7> [299.968856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state] <7> [299.969472] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [299.970035] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:88:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [299.970649] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [299.978039] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [176K, 824K) <7> [299.978791] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [299.979338] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [299.979987] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:1 = 1000000 <7> [299.980625] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 3 GT workarounds on global <7> [299.983564] i915 0000:00:02.0: [drm:intel_rc6_init [i915]] BIOS enabled RC states: HW_CTRL off HW_RC6 off SW_TARGET_STATE 0 <7> [299.985741] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 engine workarounds on rcs'0 <7> [299.986424] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on rcs'0 <7> [299.987032] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [300.001486] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [300.002149] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 4 ext-regs. <7> [300.002941] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [300.073990] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd204f <7> [300.074702] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [300.075245] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [300.075830] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [300.076475] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a6 <7> [300.077056] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x5a85000b <7> [300.077752] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [300.078331] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [300.078948] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [300.079550] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [300.080101] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [300.080763] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [300.081335] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [300.081958] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [300.082572] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [300.086878] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/bxt_guc_70.1.1.bin version 70.1.1 <6> [300.086896] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/bxt_huc_2.0.0.bin version 2.0.0 <7> [300.102541] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 100MHz, before = 100MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [300.105533] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [300.106160] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [300.106170] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [300.141127] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [300.141744] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [300.142230] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [300.142811] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [300.144476] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:59:pipe A] not active, skipping <7> [300.145076] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:88:pipe B] not active, skipping <7> [300.145729] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:109:pipe C] not active, skipping <7> [300.146427] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [300.147099] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [300.156270] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [300.163018] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2 <7> [300.164211] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.165435] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.166716] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.168423] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.169617] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.171815] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.173049] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.174246] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.175546] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.177408] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.178888] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.180663] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.182044] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.183424] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.184380] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [300.184927] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.186420] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.188308] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.189572] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.190771] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.192437] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.194437] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.195708] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.197406] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.198886] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.200456] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.202303] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.203766] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.205778] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.207343] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.208893] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.209775] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a8 (err 0) <7> [300.209817] i915 0000:00:02.0: [drm:lspcon_init [i915]] LSPCON detected <7> [300.211170] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.212392] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.214620] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.216239] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.217435] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.218632] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.220561] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.222266] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.223705] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.225438] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.227751] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.229110] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.230610] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.232412] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.233898] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.235980] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.237420] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.238597] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.240411] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.241592] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.243390] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.244951] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.246438] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [300.247543] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON <7> [300.248882] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04 <7> [300.249528] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.75 quirks 0x0000 <7> [300.249570] i915 0000:00:02.0: [drm:lspcon_init [i915]] Vendor: Mega Chips <7> [300.250135] i915 0000:00:02.0: [drm:lspcon_init [i915]] Success: LSPCON init <7> [300.251311] i915 0000:00:02.0: [drm:lspcon_detect_hdr_capability [i915]] LSPCON capable of HDR <7> [300.251999] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:DP-1] generating connector hotplug event <7> [300.253067] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [300.255571] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:DP-2] generating connector hotplug event <6> [300.255730] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [300.261499] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 2 outputs detected <6> [300.289166] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [300.294943] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input44 <7> [300.296519] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [300.298207] [drm:drm_client_modeset_probe] <7> [300.298291] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1] <7> [300.298312] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1] <7> [300.298982] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1] status updated from unknown to disconnected <7> [300.299003] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1] disconnected <7> [300.299020] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2] <7> [300.299036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2] <7> [300.299771] i915 display info: display version: 9 <7> [300.299788] i915 display info: cursor_needs_physical: no <7> [300.299793] i915 display info: has_cdclk_crawl: no <7> [300.299798] i915 display info: has_cdclk_squash: no <7> [300.299802] i915 display info: has_ddi: yes <7> [300.299807] i915 display info: has_dp_mst: yes <7> [300.299811] i915 display info: has_dsb: no <7> [300.299815] i915 display info: has_fpga_dbg: yes <7> [300.299820] i915 display info: has_gmch: no <7> [300.299824] i915 display info: has_hotplug: yes <7> [300.299829] i915 display info: has_hti: no <7> [300.299833] i915 display info: has_ipc: yes <7> [300.299837] i915 display info: has_overlay: no <7> [300.299842] i915 display info: has_psr: yes <7> [300.299846] i915 display info: has_psr_hw_tracking: yes <7> [300.299850] i915 display info: overlay_needs_physical: no <7> [300.299855] i915 display info: supports_tv: no <7> [300.299859] i915 display info: has_hdcp: yes <7> [300.299864] i915 display info: has_dmc: yes <7> [300.299868] i915 display info: has_dsc: no <7> [300.299879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-a <7> [300.301469] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [300.302088] i915 device info: pciid=0x5a85 rev=0x0b platform=BROXTON (subplatform=0x0) gen=9 <7> [300.302100] i915 device info: graphics version: 9 <7> [300.302105] i915 device info: media version: 9 <7> [300.302110] i915 device info: graphics stepping: C0 <7> [300.302115] i915 device info: media stepping: C0 <7> [300.302119] i915 device info: display stepping: C0 <7> [300.302123] i915 device info: base die stepping: ** <7> [300.302127] i915 device info: gt: 0 <7> [300.302132] i915 device info: memory-regions: 0x21 <7> [300.302136] i915 device info: page-sizes: 0x11000 <7> [300.302141] i915 device info: platform: BROXTON <7> [300.302145] i915 device info: ppgtt-size: 48 <7> [300.302150] i915 device info: ppgtt-type: 2 <7> [300.302155] i915 device info: dma_mask_size: 39 <7> [300.302159] i915 device info: is_mobile: no <7> [300.302164] i915 device info: is_lp: yes <7> [300.302168] i915 device info: require_force_probe: no <7> [300.302173] i915 device info: is_dgfx: no <7> [300.302177] i915 device info: has_64bit_reloc: yes <7> [300.302182] i915 device info: has_64k_pages: no <7> [300.302186] i915 device info: gpu_reset_clobbers_display: no <7> [300.302190] i915 device info: has_reset_engine: yes <7> [300.302195] i915 device info: has_3d_pipeline: yes <7> [300.302199] i915 device info: has_flat_ccs: no <7> [300.302203] i915 device info: has_global_mocs: no <7> [300.302208] i915 device info: has_gmd_id: no <7> [300.302212] i915 device info: has_gt_uc: yes <7> [300.302216] i915 device info: has_heci_pxp: no <7> [300.302221] i915 device info: has_heci_gscfi: no <7> [300.302225] i915 device info: has_guc_deprivilege: no <7> [300.302230] i915 device info: has_guc_tlb_invalidation: no <7> [300.302234] i915 device info: has_l3_ccs_read: no <7> [300.302239] i915 device info: has_l3_dpf: no <7> [300.302243] i915 device info: has_llc: no <7> [300.302247] i915 device info: has_logical_ring_contexts: yes <7> [300.302252] i915 device info: has_logical_ring_elsq: no <7> [300.302256] i915 device info: has_media_ratio_mode: no <7> [300.302261] i915 device info: has_mslice_steering: no <7> [300.302265] i915 device info: has_oa_bpc_reporting: no <7> [300.302269] i915 device info: has_oa_slice_contrib_limits: no <7> [300.302274] i915 device info: has_oam: no <7> [300.302278] i915 device info: has_one_eu_per_fuse_bit: no <7> [300.302283] i915 device info: has_pxp: no <7> [300.302287] i915 device info: has_rc6: yes <7> [300.302291] i915 device info: has_rc6p: no <7> [300.302295] i915 device info: has_rps: yes <7> [300.302300] i915 device info: has_runtime_pm: yes <7> [300.302304] i915 device info: has_snoop: yes <7> [300.302309] i915 device info: has_coherent_ggtt: no <7> [300.302313] i915 device info: tuning_thread_rr_after_dep: no <7> [300.302317] i915 device info: unfenced_needs_alignment: no <7> [300.302322] i915 device info: hws_needs_physical: no <7> [300.302326] i915 device info: has_pooled_eu: no <7> [300.302331] i915 device info: rawclk rate: 266667 kHz <7> [300.302336] i915 device info: iommu: enabled <7> [300.302341] i915 device info: available engines: 40403 <7> [300.302433] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2] status updated from unknown to disconnected <7> [300.303030] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2] disconnected <7> [300.303062] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [300.303073] [drm:drm_client_modeset_probe] connector 111 enabled? no <7> [300.303081] [drm:drm_client_modeset_probe] connector 123 enabled? no <7> [300.303170] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [300.303196] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [300.303238] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [300.303257] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [300.304753] [drm:drm_client_modeset_probe] <7> [300.304832] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1] <7> [300.304852] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1] <7> [300.305489] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1] disconnected <7> [300.305516] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2] <7> [300.305532] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2] <7> [300.306126] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2] disconnected <7> [300.306146] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [300.306158] [drm:drm_client_modeset_probe] connector 111 enabled? no <7> [300.306166] [drm:drm_client_modeset_probe] connector 123 enabled? no <7> [300.306249] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [300.306276] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [300.306317] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [300.306337] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [300.306648] i915 device info: slice total: 1, mask=0001 <7> [300.306656] i915 device info: subslice total: 2 <7> [300.306661] i915 device info: slice0: 2 subslices, mask=00000006 <7> [300.306667] i915 device info: EU total: 12 <7> [300.306672] i915 device info: EU per subslice: 6 <7> [300.306676] i915 device info: has slice power gating: no <7> [300.306681] i915 device info: has subslice power gating: yes <7> [300.306685] i915 device info: has EU power gating: yes <6> [300.306690] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [300.306695] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [300.306700] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [300.306709] i915: Performing live selftests with st_random_seed=0x13e972b2 st_timeout=500 <6> [300.306715] i915: Running gt_contexts <6> [300.306769] i915: Running intel_context_live_selftests/live_context_size <6> [300.342576] i915: Running intel_context_live_selftests/live_active_context <7> [300.359450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-bc <7> [300.361615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <6> [300.393696] i915: Running intel_context_live_selftests/live_remote_context <7> [300.443776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [300.445296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a <7> [300.446609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc <7> [300.469090] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [300.536278] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [300.633433] i915: probe of 0000:00:02.0 failed with error -25 <6> [301.277759] [IGT] i915_selftest: finished subtest gt_contexts, SUCCESS

<6> [299.453622] [IGT] i915_selftest: starting dynamic subtest gt_contexts

<5> [299.741063] Setting dangerous option enable_guc - tainting kernel

<5> [299.741080] Setting dangerous option enable_guc - tainting kernel

<5> [299.741094] Setting dangerous option live_selftests - tainting kernel

<7> [299.869755] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [299.870786] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [299.871416] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [299.871470] i915 0000:00:02.0: [drm:intel_detect_pch [i915]] No PCH found.

<7> [299.872090] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [299.873238] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [299.875022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 266667 kHz

<7> [299.876256] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [299.876897] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [299.877473] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [299.877995] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [299.878011] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [299.879176] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [299.879267] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [299.879975] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [299.881197] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79871018

<7> [299.881971] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [299.882629] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [299.883184] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [299.883881] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [299.884534] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] CH1 DIMM size: 32 Gb, width: X8, ranks: 1, type: DDR3

<7> [299.885038] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] CH2 DIMM size: 32 Gb, width: X8, ranks: 1, type: DDR3

<7> [299.885638] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [299.886130] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [299.887806] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz

<7> [299.888500] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT BROXTON ", BDB version 207

<7> [299.889128] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [299.889798] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [299.890441] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [299.891066] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [299.891816] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [299.892460] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [299.893085] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [299.893808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [299.894446] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [299.895046] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [299.895765] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [299.896399] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [299.896979] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [299.897664] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [299.898284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [299.898948] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [299.899562] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:1 USB-Type-C:0 TBT:0 DSC:0

<7> [299.900149] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0

<7> [299.900837] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [299.901448] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0

<7> [299.902036] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 09

<7> [299.902706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [299.903545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [299.904233] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 144000 kHz, VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6

<7> [299.904901] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [299.905738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [299.906331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [299.906987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [299.907652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [299.908502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a

<7> [299.909153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] DDI PHY 1 already enabled, won't reprogram it

<7> [299.909836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc

<7> [299.910539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] DDI PHY 0 already enabled, won't reprogram it

<7> [299.911222] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/bxt_dmc_ver1_07.bin

<6> [299.915268] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled

<7> [299.915283] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0

<6> [299.916030] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)

<7> [299.916642] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 0 us

<7> [299.917497] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec)

<7> [299.918067] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 7 (7.0 usec)

<7> [299.918699] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 8 (8.0 usec)

<7> [299.919245] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 22 (22.0 usec)

<7> [299.919967] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 22 (22.0 usec)

<7> [299.920579] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 22 (22.0 usec)

<7> [299.921129] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 22 (22.0 usec)

<7> [299.921739] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 22 (22.0 usec)

<7> [299.926375] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [299.929923] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 144000 kHz, VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6

<7> [299.930660] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 624000 kHz

<7> [299.931240] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 624000 kHz

<7> [299.931882] i915 0000:00:02.0: [drm:intel_ddi_init [i915]] VBT says port B has lspcon

<7> [299.932568] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI B/PHY B] Using AUX CH B (VBT)

<7> [299.933196] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:110:DDI B/PHY B]

<7> [299.934921] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [299.935608] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:122:DDI C/PHY C] Using AUX CH C (VBT)

<7> [299.936256] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:122:DDI C/PHY C]

<7> [299.937751] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [299.938317] i915 0000:00:02.0: [drm:vlv_dsi_init [i915]]

<7> [299.940233] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled

<7> [299.940990] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe B] hw state readout: disabled

<7> [299.942033] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled

<7> [299.942743] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [299.943996] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [299.944674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:plane 3A] hw state readout: disabled, pipe A

<7> [299.945271] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:cursor A] hw state readout: disabled, pipe A

<7> [299.945984] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B

<7> [299.946645] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B

<7> [299.947250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 3B] hw state readout: disabled, pipe B

<7> [299.947912] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:cursor B] hw state readout: disabled, pipe B

<7> [299.948598] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:plane 1C] hw state readout: disabled, pipe C

<7> [299.949208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:97:plane 2C] hw state readout: disabled, pipe C

<7> [299.949874] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:105:cursor C] hw state readout: disabled, pipe C

<7> [299.950534] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [299.951091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST A] hw state readout: disabled, pipe A

<7> [299.951770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DP-MST B] hw state readout: disabled, pipe B

<7> [299.952332] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:114:DP-MST C] hw state readout: disabled, pipe C

<7> [299.953005] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [299.953626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:124:DP-MST A] hw state readout: disabled, pipe A

<7> [299.954192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:125:DP-MST B] hw state readout: disabled, pipe B

<7> [299.954882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:126:DP-MST C] hw state readout: disabled, pipe C

<7> [299.955528] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL A hw state readout: pipe_mask 0x0, on 0

<7> [299.956121] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL B hw state readout: pipe_mask 0x0, on 0

<7> [299.956835] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL C hw state readout: pipe_mask 0x0, on 0

<7> [299.957653] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:DP-1] hw state readout: disabled

<7> [299.958284] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:DP-2] hw state readout: disabled

<7> [299.958926] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [299.959569] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [299.960141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:plane 3A] min_cdclk 0 kHz

<7> [299.960762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:cursor A] min_cdclk 0 kHz

<7> [299.961333] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [299.962028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz

<7> [299.962665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz

<7> [299.963210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 3B] min_cdclk 0 kHz

<7> [299.963836] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:cursor B] min_cdclk 0 kHz

<7> [299.964419] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [299.965013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:plane 1C] min_cdclk 0 kHz

<7> [299.965678] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:97:plane 2C] min_cdclk 0 kHz

<7> [299.966254] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:105:cursor C] min_cdclk 0 kHz

<7> [299.966883] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [299.967593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state]

<7> [299.968161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe B] enable: no [setup_hw_state]

<7> [299.968856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state]

<7> [299.969472] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [299.970035] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:88:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [299.970649] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [299.978039] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [176K, 824K)

<7> [299.978791] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [299.979338] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [299.979987] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:1 = 1000000

<7> [299.980625] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 3 GT workarounds on global

<7> [299.983564] i915 0000:00:02.0: [drm:intel_rc6_init [i915]] BIOS enabled RC states: HW_CTRL off HW_RC6 off SW_TARGET_STATE 0

<7> [299.985741] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 engine workarounds on rcs'0

<7> [299.986424] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on rcs'0

<7> [299.987032] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [300.001486] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [300.002149] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 4 ext-regs.

<7> [300.002941] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [300.073990] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd204f

<7> [300.074702] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [300.075245] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [300.075830] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [300.076475] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a6

<7> [300.077056] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x5a85000b

<7> [300.077752] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [300.078331] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [300.078948] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [300.079550] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [300.080101] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [300.080763] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [300.081335] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [300.081958] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [300.082572] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [300.086878] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/bxt_guc_70.1.1.bin version 70.1.1

<6> [300.086896] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/bxt_huc_2.0.0.bin version 2.0.0

<7> [300.102541] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 100MHz, before = 100MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [300.105533] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [300.106160] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [300.106170] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [300.141127] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [300.141744] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [300.142230] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [300.142811] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [300.144476] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:59:pipe A] not active, skipping

<7> [300.145076] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:88:pipe B] not active, skipping

<7> [300.145729] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:109:pipe C] not active, skipping

<7> [300.146427] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [300.147099] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [300.156270] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [300.163018] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2

<7> [300.164211] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.165435] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.166716] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.168423] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.169617] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.171815] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.173049] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.174246] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.175546] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.177408] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.178888] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.180663] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.182044] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.183424] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.184380] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [300.184927] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.186420] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.188308] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.189572] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.190771] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.192437] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.194437] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.195708] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.197406] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.198886] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.200456] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.202303] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.203766] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.205778] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.207343] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.208893] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.209775] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a8 (err 0)

<7> [300.209817] i915 0000:00:02.0: [drm:lspcon_init [i915]] LSPCON detected

<7> [300.211170] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.212392] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.214620] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.216239] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.217435] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.218632] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.220561] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.222266] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.223705] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.225438] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.227751] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.229110] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.230610] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.232412] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.233898] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.235980] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.237420] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.238597] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.240411] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.241592] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.243390] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.244951] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.246438] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [300.247543] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON

<7> [300.248882] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04

<7> [300.249528] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.75 quirks 0x0000

<7> [300.249570] i915 0000:00:02.0: [drm:lspcon_init [i915]] Vendor: Mega Chips

<7> [300.250135] i915 0000:00:02.0: [drm:lspcon_init [i915]] Success: LSPCON init

<7> [300.251311] i915 0000:00:02.0: [drm:lspcon_detect_hdr_capability [i915]] LSPCON capable of HDR

<7> [300.251999] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:DP-1] generating connector hotplug event

<7> [300.253067] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [300.255571] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:DP-2] generating connector hotplug event

<6> [300.255730] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [300.261499] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 2 outputs detected

<6> [300.289166] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [300.294943] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input44

<7> [300.296519] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [300.298207] [drm:drm_client_modeset_probe]

<7> [300.298291] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1]

<7> [300.298312] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1]

<7> [300.298982] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1] status updated from unknown to disconnected

<7> [300.299003] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1] disconnected

<7> [300.299020] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2]

<7> [300.299036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2]

<7> [300.299771] i915 display info: display version: 9

<7> [300.299788] i915 display info: cursor_needs_physical: no

<7> [300.299793] i915 display info: has_cdclk_crawl: no

<7> [300.299798] i915 display info: has_cdclk_squash: no

<7> [300.299802] i915 display info: has_ddi: yes

<7> [300.299807] i915 display info: has_dp_mst: yes

<7> [300.299811] i915 display info: has_dsb: no

<7> [300.299815] i915 display info: has_fpga_dbg: yes

<7> [300.299820] i915 display info: has_gmch: no

<7> [300.299824] i915 display info: has_hotplug: yes

<7> [300.299829] i915 display info: has_hti: no

<7> [300.299833] i915 display info: has_ipc: yes

<7> [300.299837] i915 display info: has_overlay: no

<7> [300.299842] i915 display info: has_psr: yes

<7> [300.299846] i915 display info: has_psr_hw_tracking: yes

<7> [300.299850] i915 display info: overlay_needs_physical: no

<7> [300.299855] i915 display info: supports_tv: no

<7> [300.299859] i915 display info: has_hdcp: yes

<7> [300.299864] i915 display info: has_dmc: yes

<7> [300.299868] i915 display info: has_dsc: no

<7> [300.299879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-a

<7> [300.301469] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [300.302088] i915 device info: pciid=0x5a85 rev=0x0b platform=BROXTON (subplatform=0x0) gen=9

<7> [300.302100] i915 device info: graphics version: 9

<7> [300.302105] i915 device info: media version: 9

<7> [300.302110] i915 device info: graphics stepping: C0

<7> [300.302115] i915 device info: media stepping: C0

<7> [300.302119] i915 device info: display stepping: C0

<7> [300.302123] i915 device info: base die stepping: **

<7> [300.302127] i915 device info: gt: 0

<7> [300.302132] i915 device info: memory-regions: 0x21

<7> [300.302136] i915 device info: page-sizes: 0x11000

<7> [300.302141] i915 device info: platform: BROXTON

<7> [300.302145] i915 device info: ppgtt-size: 48

<7> [300.302150] i915 device info: ppgtt-type: 2

<7> [300.302155] i915 device info: dma_mask_size: 39

<7> [300.302159] i915 device info: is_mobile: no

<7> [300.302164] i915 device info: is_lp: yes

<7> [300.302168] i915 device info: require_force_probe: no

<7> [300.302173] i915 device info: is_dgfx: no

<7> [300.302177] i915 device info: has_64bit_reloc: yes

<7> [300.302182] i915 device info: has_64k_pages: no

<7> [300.302186] i915 device info: gpu_reset_clobbers_display: no

<7> [300.302190] i915 device info: has_reset_engine: yes

<7> [300.302195] i915 device info: has_3d_pipeline: yes

<7> [300.302199] i915 device info: has_flat_ccs: no

<7> [300.302203] i915 device info: has_global_mocs: no

<7> [300.302208] i915 device info: has_gmd_id: no

<7> [300.302212] i915 device info: has_gt_uc: yes

<7> [300.302216] i915 device info: has_heci_pxp: no

<7> [300.302221] i915 device info: has_heci_gscfi: no

<7> [300.302225] i915 device info: has_guc_deprivilege: no

<7> [300.302230] i915 device info: has_guc_tlb_invalidation: no

<7> [300.302234] i915 device info: has_l3_ccs_read: no

<7> [300.302239] i915 device info: has_l3_dpf: no

<7> [300.302243] i915 device info: has_llc: no

<7> [300.302247] i915 device info: has_logical_ring_contexts: yes

<7> [300.302252] i915 device info: has_logical_ring_elsq: no

<7> [300.302256] i915 device info: has_media_ratio_mode: no

<7> [300.302261] i915 device info: has_mslice_steering: no

<7> [300.302265] i915 device info: has_oa_bpc_reporting: no

<7> [300.302269] i915 device info: has_oa_slice_contrib_limits: no

<7> [300.302274] i915 device info: has_oam: no

<7> [300.302278] i915 device info: has_one_eu_per_fuse_bit: no

<7> [300.302283] i915 device info: has_pxp: no

<7> [300.302287] i915 device info: has_rc6: yes

<7> [300.302291] i915 device info: has_rc6p: no

<7> [300.302295] i915 device info: has_rps: yes

<7> [300.302300] i915 device info: has_runtime_pm: yes

<7> [300.302304] i915 device info: has_snoop: yes

<7> [300.302309] i915 device info: has_coherent_ggtt: no

<7> [300.302313] i915 device info: tuning_thread_rr_after_dep: no

<7> [300.302317] i915 device info: unfenced_needs_alignment: no

<7> [300.302322] i915 device info: hws_needs_physical: no

<7> [300.302326] i915 device info: has_pooled_eu: no

<7> [300.302331] i915 device info: rawclk rate: 266667 kHz

<7> [300.302336] i915 device info: iommu: enabled

<7> [300.302341] i915 device info: available engines: 40403

<7> [300.302433] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2] status updated from unknown to disconnected

<7> [300.303030] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2] disconnected

<7> [300.303062] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [300.303073] [drm:drm_client_modeset_probe] connector 111 enabled? no

<7> [300.303081] [drm:drm_client_modeset_probe] connector 123 enabled? no

<7> [300.303170] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [300.303196] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [300.303238] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [300.303257] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [300.304753] [drm:drm_client_modeset_probe]

<7> [300.304832] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1]

<7> [300.304852] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1]

<7> [300.305489] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1] disconnected

<7> [300.305516] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2]

<7> [300.305532] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2]

<7> [300.306126] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2] disconnected

<7> [300.306146] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [300.306158] [drm:drm_client_modeset_probe] connector 111 enabled? no

<7> [300.306166] [drm:drm_client_modeset_probe] connector 123 enabled? no

<7> [300.306249] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [300.306276] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [300.306317] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [300.306337] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [300.306648] i915 device info: slice total: 1, mask=0001

<7> [300.306656] i915 device info: subslice total: 2

<7> [300.306661] i915 device info: slice0: 2 subslices, mask=00000006

<7> [300.306667] i915 device info: EU total: 12

<7> [300.306672] i915 device info: EU per subslice: 6

<7> [300.306676] i915 device info: has slice power gating: no

<7> [300.306681] i915 device info: has subslice power gating: yes

<7> [300.306685] i915 device info: has EU power gating: yes

<6> [300.306690] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [300.306695] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [300.306700] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [300.306709] i915: Performing live selftests with st_random_seed=0x13e972b2 st_timeout=500

<6> [300.306715] i915: Running gt_contexts

<6> [300.306769] i915: Running intel_context_live_selftests/live_context_size

<6> [300.342576] i915: Running intel_context_live_selftests/live_active_context

<7> [300.359450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-bc

<7> [300.361615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<6> [300.393696] i915: Running intel_context_live_selftests/live_remote_context

<7> [300.443776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [300.445296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a

<7> [300.446609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc

<7> [300.469090] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [300.536278] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [300.633433] i915: probe of 0000:00:02.0 failed with error -25

<6> [301.277759] [IGT] i915_selftest: finished subtest gt_contexts, SUCCESS

Results for igt@i915_selftest@live@gt_contexts