Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 1.28-g5652fea13 (x86_64) (Linux: 6.7.0-linus-v6.7-g0dd3ee311255+ x86_64)
Out 
Using IGT_SRANDOM=1704659434 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.019s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.019s)
Dmesg
<6> [113.293601] Console: switching to colour dummy device 80x25
<6> [113.293822] [IGT] kms_force_connector_basic: executing
<7> [113.299974] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [113.300581] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [113.300793] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [113.301659] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [113.301669] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.301675] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.301883] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [113.301916] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.301921] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.302123] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [113.302285] [drm:status_store] [CONNECTOR:263:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [113.302291] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2]
<7> [113.302296] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2]
<7> [113.353145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10
<7> [113.369355] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [113.369365] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.369610] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [113.386291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [113.386295] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [113.386391] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected
<7> [113.386417] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2]
<7> [113.386421] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2]
<7> [113.437145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10
<7> [113.453340] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [113.453348] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.453558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [113.469244] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [113.469247] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [113.469344] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected
<7> [113.469476] [drm:status_store] [CONNECTOR:275:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [113.469481] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-3]
<7> [113.469485] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-3]
<7> [113.469622] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-3] disconnected
<7> [113.469644] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-3]
<7> [113.469647] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-3]
<7> [113.469765] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-3] disconnected
<7> [113.469857] [drm:status_store] [CONNECTOR:287:HDMI-A-4] force updated from 0 to 0 or reprobing
<7> [113.469860] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-4]
<7> [113.469863] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-4]
<7> [113.469979] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-4] disconnected
<7> [113.469996] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-4]
<7> [113.469999] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-4]
<7> [113.470119] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-4] disconnected
<7> [113.470132] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.470135] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.470252] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<6> [113.470468] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [113.470552] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [113.470555] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.470558] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.470867] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0050 w(1)
<7> [113.470968] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry
<7> [113.471290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0050 w(1)
<7> [113.471394] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc1
<7> [113.471402] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.471499] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc1. force bit now 1
<7> [113.475626] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc1
<7> [113.475632] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc1. force bit now 0
<7> [113.475734] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] status updated from disconnected to connected
<7> [113.475825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [113.475828] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [113.475833] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [113.475837] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [113.475841] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [113.475844] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [113.475873] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.475877] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.476359] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0050 w(1)
<7> [113.476470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry
<7> [113.476768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0050 w(1)
<7> [113.476867] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc1
<7> [113.476874] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.476969] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc1. force bit now 1
<7> [113.481061] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc1
<7> [113.481067] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc1. force bit now 0
<7> [113.481204] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [113.481218] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [113.481223] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [113.481226] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [113.481228] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [113.481231] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [113.481374] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:249:HDMI-A-1] EDID override set
<7> [113.481387] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.481390] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.481507] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD monitor IGT
<7> [113.481511] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD size 24, SAD count 0
<7> [113.481710] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)
<7> [113.481813] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry
<7> [113.482109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)
<7> [113.482221] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [113.482286] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [113.482291] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [113.482295] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [113.482299] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [113.482306] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [113.482309] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [113.482311] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [113.482314] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [113.482316] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [113.482319] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [113.482321] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [113.482406] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:249:HDMI-A-1] EDID override set
<7> [113.482422] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.482424] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.482544] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD monitor IGT
<7> [113.482547] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD size 24, SAD count 0
<7> [113.482550] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:249:HDMI-A-1] EDID changed, epoch counter 4
<7> [113.482759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)
<7> [113.482868] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry
<7> [113.483166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)
<7> [113.483276] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [113.483338] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [113.483343] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [113.483347] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [113.483349] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [113.483352] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [113.483355] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [113.483357] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [113.483360] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [113.483430] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:249:HDMI-A-1] EDID override reset
<7> [113.483444] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.483447] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.483762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0050 w(1)
<7> [113.483862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry
<7> [113.484190] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0050 w(1)
<7> [113.484298] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc1
<7> [113.484307] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.484410] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc1. force bit now 1
<7> [113.488513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc1
<7> [113.488519] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc1. force bit now 0
<7> [113.488621] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:249:HDMI-A-1] EDID changed, epoch counter 5
<7> [113.488652] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [113.488656] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [113.488660] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [113.488663] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [113.488667] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [113.488669] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [113.488672] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [113.488674] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [113.488677] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [113.488679] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [113.488786] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [113.488789] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.488794] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.488922] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] status updated from connected to disconnected
<7> [113.488931] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [113.488961] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.488964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.489085] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<6> [113.489330] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [113.489407] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [113.489793] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:DP-1] EDID override reset
<7> [113.489805] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]
<7> [113.489808] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [113.489935] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] disconnected
<7> [113.490021] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [113.490024] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.490027] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.490246] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [113.490281] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.490285] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.490417] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [113.490487] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:249:HDMI-A-1] EDID override reset
<7> [113.490499] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.490502] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.490620] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [113.490696] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:255:DP-2] EDID override reset
<7> [113.490708] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]
<7> [113.490711] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [113.495542] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY C: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [113.495557] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY C: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [113.496836] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:255:DP-2][ENCODER:254:DDI TC2/PHY C][DPRX] LTTPR common capabilities: 14 1e 80 aa 04 0a 00 00
<7> [113.499763] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:255:DP-2][ENCODER:254:DDI TC2/PHY C][LTTPR 1] PHY capabilities: 00 03 00
<7> [113.503938] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY C: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [113.503952] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY C: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [113.505364] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY C: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [113.506799] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [113.508327] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [113.509834] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:254:DDI TC2/PHY C] MST support: port: yes, sink: no, modparam: yes
<7> [113.509954] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [113.510073] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [113.510210] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [113.530067] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:255:DP-2] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [113.530075] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:255:DP-2] CEA VCDB 0x6a
<7> [113.530079] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:255:DP-2] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [113.530082] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:255:DP-2] ELD monitor LG ULTRAFINE
<7> [113.530085] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:255:DP-2] ELD size 36, SAD count 1
<7> [113.530097] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:255:DP-2] VRR capable: yes
<7> [113.530247] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:255:DP-2] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [113.531845] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [113.531966] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:255:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [113.533605] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] probed modes :
<7> [113.533609] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0x9
<7> [113.533613] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [113.533616] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [113.533619] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
<7> [113.533622] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [113.533625] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [113.533627] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138500 1920 1962 2000 2080 1080 1083 1088 1111 0x40 0x9
<7> [113.533630] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [113.533633] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [113.533636] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [113.533639] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [113.533642] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [113.533644] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [113.533647] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [113.533650] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [113.533652] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [113.533773] [drm:status_store] [CONNECTOR:263:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [113.533777] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2]
<7> [113.533781] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2]
<7> [113.584143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10
<7> [113.600308] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [113.600316] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.600507] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [113.616273] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [113.616276] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [113.616372] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected
<7> [113.616412] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2]
<7> [113.616416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2]
<7> [113.667147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10
<7> [113.683326] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [113.683334] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.683548] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [113.699252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [113.699256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [113.699356] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected
<7> [113.699442] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:263:HDMI-A-2] EDID override reset
<7> [113.699456] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2]
<7> [113.699460] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2]
<7> [113.750147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10
<7> [113.766314] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [113.766322] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.766535] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [113.782253] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [113.782256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [113.782353] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected
<7> [113.782454] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:267:DP-3] EDID override reset
<7> [113.782470] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3]
<7> [113.782474] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:267:DP-3]
<7> [113.782598] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3] disconnected
<7> [113.782683] [drm:status_store] [CONNECTOR:275:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [113.782686] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-3]
<7> [113.782689] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-3]
<7> [113.782810] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-3] disconnected
<7> [113.782831] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-3]
<7> [113.782834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-3]
<7> [113.782950] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-3] disconnected
<7> [113.783004] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:275:HDMI-A-3] EDID override reset
<7> [113.783015] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-3]
<7> [113.783017] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-3]
<7> [113.783159] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-3] disconnected
<7> [113.783240] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:279:DP-4] EDID override reset
<7> [113.783251] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:279:DP-4]
<7> [113.783254] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:279:DP-4]
<7> [113.783378] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:279:DP-4] disconnected
<7> [113.783461] [drm:status_store] [CONNECTOR:287:HDMI-A-4] force updated from 0 to 0 or reprobing
<7> [113.783465] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-4]
<7> [113.783468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-4]
<7> [113.783592] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-4] disconnected
<7> [113.783613] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-4]
<7> [113.783616] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-4]
<7> [113.783744] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-4] disconnected
<7> [113.783799] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:287:HDMI-A-4] EDID override reset
<7> [113.783810] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-4]
<7> [113.783813] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-4]
<7> [113.783948] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-4] disconnected
<6> [113.784358] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [113.784429] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [113.784433] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.784436] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.784562] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [113.784590] [drm:status_store] [CONNECTOR:263:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [113.784593] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2]
<7> [113.784596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2]
<7> [113.835144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10
<7> [113.851314] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [113.851322] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.851521] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [113.867294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [113.867297] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [113.867398] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected
<7> [113.867444] [drm:status_store] [CONNECTOR:275:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [113.867448] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-3]
<7> [113.867452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-3]
<7> [113.867594] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-3] disconnected
<7> [113.867627] [drm:status_store] [CONNECTOR:287:HDMI-A-4] force updated from 0 to 0 or reprobing
<7> [113.867630] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-4]
<7> [113.867634] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-4]
<7> [113.867753] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-4] disconnected
<7> [113.867876] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [113.883442] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [113.883450] [drm:drm_client_modeset_probe]
<7> [113.883494] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]
<7> [113.883502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [113.883707] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] disconnected
<7> [113.883713] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.883718] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.883912] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [113.883917] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]
<7> [113.883922] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [113.889347] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY C: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [113.889363] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY C: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [113.890954] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:255:DP-2][ENCODER:254:DDI TC2/PHY C][DPRX] LTTPR common capabilities: 14 1e 80 aa 04 0a 00 00
<7> [113.894817] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:255:DP-2][ENCODER:254:DDI TC2/PHY C][LTTPR 1] PHY capabilities: 00 03 00
<7> [113.899757] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY C: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [113.899800] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY C: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [113.901251] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY C: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [113.902815] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [113.904745] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [113.906501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:254:DDI TC2/PHY C] MST support: port: yes, sink: no, modparam: yes
<7> [113.906868] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [113.907239] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [113.907561] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [113.928209] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:255:DP-2] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [113.928222] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:255:DP-2] CEA VCDB 0x6a
<7> [113.928228] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:255:DP-2] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [113.928233] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:255:DP-2] ELD monitor LG ULTRAFINE
<7> [113.928239] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:255:DP-2] ELD size 36, SAD count 1
<7> [113.928256] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:255:DP-2] VRR capable: yes
<7> [113.928450] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:255:DP-2] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [113.930158] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [113.930323] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:255:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [113.932069] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] probed modes :
<7> [113.932075] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0x9
<7> [113.932080] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [113.932085] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [113.932089] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
<7> [113.932093] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [113.932097] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [113.932116] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138500 1920 1962 2000 2080 1080 1083 1088 1111 0x40 0x9
<7> [113.932121] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [113.932126] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [113.932130] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [113.932134] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [113.932138] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [113.932143] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [113.932147] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [113.932151] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [113.932155] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [113.932160] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2]
<7> [113.932165] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2]
<7> [113.983148] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10
<7> [113.999387] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [113.999397] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.999621] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [114.016282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [114.016286] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [114.016386] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected
<7> [114.016391] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3]
<7> [114.016394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:267:DP-3]
<7> [114.016512] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3] disconnected
<7> [114.016515] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-3]
<7> [114.016517] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-3]
<7> [114.016639] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-3] disconnected
<7> [114.016642] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:279:DP-4]
<7> [114.016644] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:279:DP-4]
<7> [114.016760] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:279:DP-4] disconnected
<7> [114.016762] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-4]
<7> [114.016765] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-4]
<7> [114.016882] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-4] disconnected
<7> [114.016884] [drm:drm_client_modeset_probe] connector 236 enabled? no
<7> [114.016887] [drm:drm_client_modeset_probe] connector 249 enabled? no
<7> [114.016889] [drm:drm_client_modeset_probe] connector 255 enabled? yes
<7> [114.016891] [drm:drm_client_modeset_probe] connector 263 enabled? no
<7> [114.016892] [drm:drm_client_modeset_probe] connector 267 enabled? no
<7> [114.016894] [drm:drm_client_modeset_probe] connector 275 enabled? no
<7> [114.016896] [drm:drm_client_modeset_probe] connector 279 enabled? no
<7> [114.016897] [drm:drm_client_modeset_probe] connector 287 enabled? no
<7> [114.016920] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [114.016928] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 255
<7> [114.016931] [drm:drm_client_modeset_probe] looking for preferred mode on connector 255 0
<7> [114.016933] [drm:drm_client_modeset_probe] found mode 3840x2160
<7> [114.016935] [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [114.016949] [drm:drm_client_modeset_probe] desired mode 3840x2160 set on crtc 80 (0,0)
<6> [114.050967] Console: switching to colour frame buffer device 480x135
Created at 2024-01-07 22:03:54