Results for igt@kms_force_connector_basic@force-edid

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.41 seconds
Igt-Version 
IGT-Version: 1.28-g5652fea13 (x86_64) (Linux: 6.7.0-linus-v6.7-g0dd3ee311255+ x86_64)
Out 
Using IGT_SRANDOM=1704659113 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.411s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.411s)
Dmesg
<6> [115.472248] Console: switching to colour dummy device 80x25
<6> [115.472480] [IGT] kms_force_connector_basic: executing
<7> [115.474774] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [115.475230] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [115.475381] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [115.475791] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [115.475796] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [115.475801] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [115.528838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [115.538676] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [115.538689] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.538903] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [115.546229] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [115.546234] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [115.546323] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [115.546357] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [115.546361] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [115.596750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [115.606198] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [115.606208] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.606423] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [115.613652] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [115.613655] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [115.613742] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [115.613828] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [115.613833] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [115.664313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [115.673817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [115.673827] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.674075] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [115.681628] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [115.681632] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [115.681740] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<6> [115.681973] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [115.682115] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [115.682120] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [115.682124] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [115.732655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [115.741758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [115.741769] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.741884] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [115.748928] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [115.748934] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [115.749037] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] status updated from disconnected to connected
<7> [115.749208] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [115.749211] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [115.749217] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [115.749220] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [115.749223] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [115.749226] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [115.749284] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [115.749288] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [115.801978] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [115.811435] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [115.811456] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.811675] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [115.818926] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [115.818931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [115.819098] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [115.819103] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [115.819108] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [115.819111] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [115.819114] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [115.819117] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [115.821715] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:249:HDMI-A-1] EDID override set
<7> [115.821737] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [115.821740] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [115.822110] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD monitor IGT
<7> [115.822113] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD size 24, SAD count 0
<7> [115.873783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [115.883264] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [115.883407] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [115.883419] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [115.883428] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [115.883435] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [115.883443] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [115.883449] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [115.883455] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [115.883461] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [115.883466] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [115.883471] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [115.883663] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:249:HDMI-A-1] EDID override reset
<7> [115.883774] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [115.883784] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [115.936463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [115.946221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [115.946250] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.946529] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [115.953876] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [115.953882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [115.953985] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:249:HDMI-A-1] EDID changed, epoch counter 2
<7> [115.954052] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [115.954057] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [115.954087] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [115.954089] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [115.954094] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [115.954097] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [115.954100] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [115.954102] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [115.954105] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [115.954107] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [115.954245] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [115.954250] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [115.954254] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [116.006706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [116.016546] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.016557] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.016774] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.024097] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.024100] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.024194] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] status updated from connected to disconnected
<7> [116.024205] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [116.024283] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [116.024288] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [116.076130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [116.085576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.085586] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.085811] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.093140] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.093143] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.093231] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<6> [116.093539] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [116.093643] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [116.094019] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:DP-1] EDID override reset
<7> [116.094038] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]
<7> [116.094066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [116.099065] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [116.099080] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [116.100536] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [116.104801] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [116.104815] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [116.106281] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [116.107918] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.109668] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [116.111356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes
<7> [116.111511] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [116.111651] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [116.111783] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [116.131562] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz
<7> [116.131569] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [116.131572] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K
<7> [116.131574] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1
<7> [116.131587] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes
<7> [116.131686] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [116.133034] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.133132] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [116.134767] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] probed modes :
<7> [116.134771] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9
<7> [116.134775] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9
<7> [116.134778] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
<7> [116.134780] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [116.134782] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [116.134784] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [116.134787] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [116.134789] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [116.134791] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
<7> [116.134794] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81768 1152 1216 1336 1520 864 867 871 897 0x0 0x6
<7> [116.134796] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [116.134798] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [116.134800] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [116.134803] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.134805] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.134807] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [116.134809] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [116.134812] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.134814] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.134816] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.134944] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [116.134949] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [116.134953] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [116.188143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [116.197652] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.197664] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.197853] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.204997] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.205000] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.205102] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [116.205199] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [116.205205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [116.257753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [116.267279] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.267291] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.267519] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.274760] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.274763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.274854] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [116.274986] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:249:HDMI-A-1] EDID override reset
<7> [116.275003] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [116.275006] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [116.327472] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [116.336993] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.337003] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.337288] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.344522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.344526] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.344617] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [116.344709] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:255:DP-2] EDID override reset
<7> [116.344722] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]
<7> [116.344726] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [116.344881] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected
<7> [116.344939] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:264:DP-3] EDID override reset
<7> [116.344948] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3]
<7> [116.344951] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [116.345115] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected
<7> [116.345177] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:273:DP-4] EDID override reset
<7> [116.345187] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4]
<7> [116.345189] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]
<7> [116.345324] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected
<7> [116.345385] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:282:DP-5] EDID override reset
<7> [116.345395] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5]
<7> [116.345397] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]
<7> [116.345529] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected
<6> [116.345898] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [116.345979] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [116.345984] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [116.345987] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [116.396678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [116.406453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.406461] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.406662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.413831] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.413834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.413922] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [116.414105] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [116.422075] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [116.422080] [drm:drm_client_modeset_probe]
<7> [116.422108] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]
<7> [116.422115] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [116.426932] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [116.426983] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [116.428399] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [116.432767] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [116.432798] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [116.434433] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [116.436106] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.437919] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [116.439785] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes
<7> [116.440086] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [116.440352] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [116.440479] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [116.461069] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz
<7> [116.461083] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [116.461088] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K
<7> [116.461093] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1
<7> [116.461112] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes
<7> [116.461302] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [116.462943] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.463139] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [116.465103] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] probed modes :
<7> [116.465109] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9
<7> [116.465116] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9
<7> [116.465121] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
<7> [116.465126] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [116.465130] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [116.465134] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [116.465138] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [116.465143] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [116.465147] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
<7> [116.465152] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81768 1152 1216 1336 1520 864 867 871 897 0x0 0x6
<7> [116.465156] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [116.465160] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [116.465165] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [116.465169] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.465173] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.465178] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [116.465182] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [116.465186] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.465191] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.465195] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.465200] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [116.465206] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [116.517354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [116.527156] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.527166] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.527421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.534832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.534836] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.534926] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [116.534929] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]
<7> [116.534932] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [116.535148] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected
<7> [116.535151] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3]
<7> [116.535154] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [116.535290] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected
<7> [116.535294] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4]
<7> [116.535296] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]
<7> [116.535428] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected
<7> [116.535431] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5]
<7> [116.535433] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]
<7> [116.535565] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected
<7> [116.535567] [drm:drm_client_modeset_probe] connector 236 enabled? yes
<7> [116.535570] [drm:drm_client_modeset_probe] connector 249 enabled? no
<7> [116.535571] [drm:drm_client_modeset_probe] connector 255 enabled? no
<7> [116.535573] [drm:drm_client_modeset_probe] connector 264 enabled? no
<7> [116.535574] [drm:drm_client_modeset_probe] connector 273 enabled? no
<7> [116.535576] [drm:drm_client_modeset_probe] connector 282 enabled? no
<7> [116.535599] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [116.535608] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236
<7> [116.535610] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0
<7> [116.535612] [drm:drm_client_modeset_probe] found mode 3840x2160
<7> [116.535614] [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [116.535628] [drm:drm_client_modeset_probe] desired mode 3840x2160 set on crtc 80 (0,0)
<6> [116.555803] Console: switching to colour frame buffer device 480x135
Created at 2024-01-07 22:03:52