igt@kms_pm_rpm@basic-pci-d3-state on bat-adln-1@linus-v6.7 Test details

Detail	Value
Duration	unknown
Igt-Version	IGT-Version: 1.28-g5652fea13 (x86_64) (Linux: 6.7.0-linus-v6.7-g0dd3ee311255+ x86_64)
Out	Using IGT_SRANDOM=1704659473 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_client_modeset_commit_atomic+0x234/0x280 drm_client_modeset_commit_locked+0x56/0x190 drm_client_modeset_commit+0x23/0x50 __drm_fb_helper_restore_fbdev_mode_unlocked+0x99/0xd0 intel_fbdev_restore_mode+0x2f/0x60 [i915] Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x179/0x2c0 [i915] process_scheduled_works+0x2db/0x530 worker_thread+0x18c/0x350 kthread+0xfe/0x130 ret_from_fork+0x2c/0x50 ret_from_fork_asm+0x1b/0x30 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_atomic_commit_tail+0xa49/0xd50 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1ff/0x710 drm_ioctl_kernel+0xbd/0x150 Starting subtest: basic-pci-d3-state Subtest basic-pci-d3-state: SUCCESS (4.606s) This test caused an abort condition: Lockdep not active /proc/lockdep_stats contents: lock-classes: 1780 [max: 8192] direct dependencies: 17554 [max: 32768] indirect dependencies: 134416 all direct dependencies: 362614 dependency chains: 25643 [max: 131072] dependency chain hlocks used: 107456 [max: 655360] dependency chain hlocks lost: 0 in-hardirq chains: 276 in-softirq chains: 585 in-process chains: 24782 stack-trace entries: 167200 [max: 1048576] number of stack traces: 8463 number of stack hash chains: 6591 combined max dependencies: 4022826126 hardirq-safe locks: 102 hardirq-unsafe locks: 1065 softirq-safe locks: 205 softirq-unsafe locks: 978 irq-safe locks: 222 irq-unsafe locks: 1065 hardirq-read-safe locks: 3 hardirq-read-unsafe locks: 308 softirq-read-safe locks: 7 softirq-read-unsafe locks: 303 irq-read-safe locks: 7 irq-read-unsafe locks: 308 uncategorized locks: 295 unused locks: 1 max locking depth: 15 max bfs queue depth: 393 max lock class index: 1779 chain lookup misses: 25813 chain lookup hits: 132783763 cyclic checks: 25922 redundant checks: 0 redundant links: 0 find-mask forwards checks: 4418 find-mask backwards checks: 2656 hardirq on events: 85146604 hardirq off events: 85146600 redundant hardirq ons: 38 redundant hardirq offs: 19 softirq on events: 278731 softirq off events: 278731 redundant softirq ons: 0 redundant softirq offs: 0 debug_locks: 0 zapped classes: 1 zapped lock chains: 104 large chain blocks: 1
Err	Starting subtest: basic-pci-d3-state Subtest basic-pci-d3-state: SUCCESS (4.606s)
Dmesg Scroll to first warning	<6> [209.708238] Console: switching to colour dummy device 80x25 <6> [209.709009] [IGT] kms_pm_rpm: executing <7> [209.711609] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [209.718133] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] <7> [209.718147] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [209.718370] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected <7> [209.718821] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] <7> [209.718828] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [209.719038] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected <7> [209.719508] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] <7> [209.719513] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <7> [209.719735] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected <7> [209.720262] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] <7> [209.720267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1] <7> [209.721061] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [209.721647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [209.721800] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [209.721953] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [209.722118] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [209.722320] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [209.722330] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [209.722334] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor <7> [209.722338] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0 <7> [209.722358] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no <7> [209.722523] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [209.723443] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [209.723612] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [209.724322] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes : <7> [209.724329] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [209.724336] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [209.724369] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] <7> [209.724375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [209.724551] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected <7> [209.724574] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] <7> [209.724579] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [209.724783] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected <7> [209.724804] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] <7> [209.724808] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <7> [209.724997] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected <7> [209.725032] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] <7> [209.725036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1] <7> [209.725827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [209.726440] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [209.726600] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [209.726787] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [209.726928] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [209.727080] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [209.727089] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [209.727093] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor <7> [209.727096] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0 <7> [209.727113] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no <7> [209.727246] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [209.728020] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [209.728182] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [209.728866] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes : <7> [209.728873] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [209.728879] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [209.728970] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] <7> [209.728976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [209.729222] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected <7> [209.729293] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] <7> [209.729298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [209.729477] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected <7> [209.729538] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] <7> [209.729542] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <7> [209.729731] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected <7> [209.730101] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:220] <7> [210.772746] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [210.772945] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [210.773418] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [210.773820] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [210.774189] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [210.774539] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7843931/8388608 link 522928/524288, found tu 0, data 0/0 link 0/0) <7> [210.774903] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [210.775247] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [210.775580] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0) <7> [210.775928] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0) <7> [210.776270] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0) <7> [210.776588] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0) <7> [210.776736] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0) <7> [210.776887] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0) <7> [210.777016] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0) <7> [210.777145] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2160, found 0) <7> [210.777273] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2163, found 0) <7> [210.777400] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2168, found 0) <7> [210.777527] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2244, found 0) <7> [210.777664] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2244, found 0) <7> [210.777809] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0) <7> [210.777938] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0) <7> [210.778063] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0) <7> [210.778187] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0) <7> [210.778311] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0) <7> [210.778435] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0) <7> [210.778559] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0) <7> [210.778696] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2160, found 0) <7> [210.778840] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2163, found 0) <7> [210.778976] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2168, found 0) <7> [210.779102] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2244, found 0) <7> [210.779228] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2244, found 0) <7> [210.779352] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [210.779477] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [210.779600] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [210.779737] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [210.779879] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 538600, found 0) <7> [210.780019] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 538600, found 0) <7> [210.780157] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [210.780296] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [210.780446] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:80:pipe A] releasing DPLL 0 <7> [210.780650] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [210.780801] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [210.780970] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0 <7> [210.781108] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0 <7> [210.781243] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [210.781377] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [210.781512] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [210.781661] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [210.781807] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0 <7> [210.781971] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0 <7> [210.782120] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0 <7> [210.782266] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0 <7> [210.782410] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0 <7> [210.782563] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0 <7> [210.782720] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0 <7> [210.782870] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0 <7> [210.783034] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [210.783180] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz <7> [210.783333] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [210.783487] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [modeset] <7> [210.783645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [210.783799] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [210.783943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [210.784088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [210.784243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [210.784424] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7> [210.784715] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2 <7> [210.788143] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [210.994930] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:185:eDP-1] set backlight PWM = 0 <7> [210.995858] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [211.005569] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turn panel power off <7> [211.006289] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power off time <7> [211.006907] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [211.060137] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [211.060832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A <7> [211.061355] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [211.061504] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:80:pipe A] <7> [211.062026] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long <7> [211.062250] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [211.062663] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [211.062987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [211.063430] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A] <7> [211.063700] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [211.064492] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=448 <7> [211.065054] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:184:DDI A/PHY A] <7> [211.065576] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:193:DDI B/PHY B] <7> [211.065858] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:202:DDI TC1/PHY TC1] <7> [211.066009] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:204:DP-MST A] <7> [211.066148] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:205:DP-MST B] <7> [211.066280] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:206:DP-MST C] <7> [211.066429] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:211:DDI TC2/PHY TC2] <7> [211.066600] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:213:DP-MST A] <7> [211.066786] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:214:DP-MST B] <7> [211.066963] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:215:DP-MST C] <7> [211.067119] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:185:eDP-1] <7> [211.067288] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [211.067454] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [211.067603] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [211.067763] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [211.067936] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [211.068105] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [211.068285] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [211.068496] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [211.068755] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [211.069002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A <7> [211.069198] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7> [211.069566] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [211.069753] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [211.087989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [211.088714] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.089242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.090100] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.091777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [211.094401] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [211.095520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [211.096399] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [211.097181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [211.097754] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [211.098114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [211.098744] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [211.173231] [IGT] kms_pm_rpm: starting subtest basic-pci-d3-state <7> [211.183308] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [211.196192] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [211.196474] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [211.196889] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [211.197296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [211.197739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.198182] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.198564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [211.199611] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [211.200010] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [211.200527] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [211.204797] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.205073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.210336] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [211.210966] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [211.211408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.212402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [211.213083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [211.214035] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [211.214349] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [211.214946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1] <7> [211.215303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [211.215846] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD on <7> [211.216068] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [211.667106] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [211.667548] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [211.668044] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [211.668393] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [211.730316] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [211.731018] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long <7> [211.731605] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [211.732293] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A] <7> [211.876609] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.877760] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [211.878146] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [211.878511] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [211.878897] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [211.879653] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [211.879675] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [211.879687] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor <7> [211.879698] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0 <7> [211.879778] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no <7> [211.880015] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [211.880822] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.880961] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [211.881609] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [211.881885] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [211.882134] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <4> [214.284080] <4> [214.284092] ====================================================== <4> [214.284096] WARNING: possible circular locking dependency detected <4> [214.284099] 6.7.0-linus-v6.7-g0dd3ee311255+ #1 Not tainted <4> [214.284103] ------------------------------------------------------ <4> [214.284105] kworker/2:0H/27 is trying to acquire lock: <4> [214.284109] ffff88810558d8e8 (&gt->reset.backoff_srcu){++++}-{0:0}, at: _intel_gt_reset_lock+0x35/0x380 [i915] <4> [214.284459] but task is already holding lock: <4> [214.284462] ffffc9000021fe58 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530 <4> [214.284475] which lock already depends on the new lock. <4> [214.284477] the existing dependency chain (in reverse order) is: <4> [214.284479] -> #3 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}: <4> [214.284486] lock_acquire+0xd8/0x2d0 <4> [214.284492] __flush_work+0x69/0x420 <4> [214.284496] __cancel_work_timer+0x14f/0x1f0 <4> [214.284501] intel_guc_submission_reset_prepare+0x81/0x4b0 [i915] <4> [214.284884] intel_uc_reset_prepare+0x4a/0xb0 [i915] <4> [214.285256] reset_prepare+0x21/0x60 [i915] <4> [214.285542] intel_gt_reset+0x1c6/0x460 [i915] <4> [214.285813] intel_gt_reset_global+0xeb/0x160 [i915] <4> [214.286081] intel_gt_handle_error+0x370/0x420 [i915] <4> [214.286344] intel_gt_debugfs_reset_store+0x5c/0xc0 [i915] <4> [214.286608] i915_wedged_set+0x1d/0x40 [i915] <4> [214.286843] simple_attr_write_xsigned.constprop.0+0xb4/0x110 <4> [214.286849] full_proxy_write+0x58/0x80 <4> [214.286856] vfs_write+0xcb/0x4f0 <4> [214.286863] ksys_write+0x64/0xe0 <4> [214.286868] do_syscall_64+0x42/0xf0 <4> [214.286876] entry_SYSCALL_64_after_hwframe+0x6e/0x76 <4> [214.286882] -> #2 (&gt->reset.mutex){+.+.}-{3:3}: <4> [214.286888] lock_acquire+0xd8/0x2d0 <4> [214.286892] i915_gem_shrinker_taints_mutex+0x31/0x50 [i915] <4> [214.287201] intel_gt_init_reset+0x65/0x80 [i915] <4> [214.287455] intel_gt_common_init_early+0xd9/0x120 [i915] <4> [214.287695] intel_root_gt_init_early+0x5e/0x70 [i915] <4> [214.287926] i915_driver_probe+0x268/0xd40 [i915] <4> [214.288125] i915_pci_probe+0xd5/0x200 [i915] <4> [214.288276] pci_device_probe+0x95/0x120 <4> [214.288279] really_probe+0x164/0x3c0 <4> [214.288283] __driver_probe_device+0x73/0x160 <4> [214.288285] driver_probe_device+0x19/0xa0 <4> [214.288287] __driver_attach+0xb6/0x180 <4> [214.288288] bus_for_each_dev+0x77/0xd0 <4> [214.288290] bus_add_driver+0x114/0x210 <4> [214.288292] driver_register+0x5b/0x110 <4> [214.288294] __pfx_do_pcm_suspend+0x3/0x10 [snd_pcm] <4> [214.288306] do_one_initcall+0x57/0x270 <4> [214.288309] do_init_module+0x5f/0x210 <4> [214.288312] load_module+0x1cdf/0x1f40 <4> [214.288315] init_module_from_file+0x86/0xd0 <4> [214.288317] idempotent_init_module+0x17c/0x230 <4> [214.288319] __x64_sys_finit_module+0x56/0xb0 <4> [214.288321] do_syscall_64+0x42/0xf0 <4> [214.288323] entry_SYSCALL_64_after_hwframe+0x6e/0x76 <4> [214.288325] -> #1 (fs_reclaim){+.+.}-{0:0}: <4> [214.288328] lock_acquire+0xd8/0x2d0 <4> [214.288329] fs_reclaim_acquire+0xa1/0xd0 <4> [214.288332] __alloc_pages+0xeb/0x2e0 <4> [214.288334] pte_alloc_one+0x1d/0x110 <4> [214.288336] __pte_alloc+0x26/0x120 <4> [214.288339] __apply_to_page_range+0x66f/0x740 <4> [214.288341] remap_io_mapping+0x70/0x120 [i915] <4> [214.288427] vm_fault_gtt+0x47a/0xe70 [i915] <4> [214.288542] __do_fault+0x2f/0x180 <4> [214.288544] do_pte_missing+0x4cb/0xbc0 <4> [214.288545] __handle_mm_fault+0x637/0x780 <4> [214.288548] handle_mm_fault+0xc3/0x240 <4> [214.288549] do_user_addr_fault+0x431/0x9e0 <4> [214.288551] exc_page_fault+0x68/0x1a0 <4> [214.288553] asm_exc_page_fault+0x26/0x30 <4> [214.288555] -> #0 (&gt->reset.backoff_srcu){++++}-{0:0}: <4> [214.288557] check_prev_add+0xef/0xd30 <4> [214.288559] __lock_acquire+0x17d7/0x2340 <4> [214.288560] lock_acquire+0xd8/0x2d0 <4> [214.288561] _intel_gt_reset_lock+0x50/0x380 [i915] <4> [214.288662] guc_timestamp_ping+0x71/0x120 [i915] <4> [214.288795] process_scheduled_works+0x2db/0x530 <4> [214.288797] worker_thread+0x18c/0x350 <4> [214.288798] kthread+0xfe/0x130 <4> [214.288801] ret_from_fork+0x2c/0x50 <4> [214.288803] ret_from_fork_asm+0x1b/0x30 <4> [214.288805] other info that might help us debug this: <4> [214.288805] Chain exists of: &gt->reset.backoff_srcu --> &gt->reset.mutex --> (work_completion)(&(&guc->timestamp.work)->work) <4> [214.288808] Possible unsafe locking scenario: <4> [214.288809] CPU0 CPU1 <4> [214.288810] ---- ---- <4> [214.288811] lock((work_completion)(&(&guc->timestamp.work)->work)); <4> [214.288812] lock(&gt->reset.mutex); <4> [214.288813] lock((work_completion)(&(&guc->timestamp.work)->work)); <4> [214.288815] lock(&gt->reset.backoff_srcu); <4> [214.288816] DEADLOCK * <4> [214.288817] 2 locks held by kworker/2:0H/27: <4> [214.288818] #0: ffff888100079b38 ((wq_completion)events_highpri){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530 <4> [214.288822] #1: ffffc9000021fe58 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530 <4> [214.288825] stack backtrace: <4> [214.288827] CPU: 2 PID: 27 Comm: kworker/2:0H Not tainted 6.7.0-linus-v6.7-g0dd3ee311255+ #1 <4> [214.288829] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-N LP5 RVP, BIOS ADLNFWI1.R00.3362.A00.2208311605 08/31/2022 <4> [214.288831] Workqueue: events_highpri guc_timestamp_ping [i915] <4> [214.288960] Call Trace: <4> [214.288962] <TASK> <4> [214.288964] dump_stack_lvl+0x64/0xb0 <4> [214.288968] check_noncircular+0x15f/0x180 <4> [214.288971] check_prev_add+0xef/0xd30 <4> [214.288973] __lock_acquire+0x17d7/0x2340 <4> [214.288975] lock_acquire+0xd8/0x2d0 <4> [214.288977] ? _intel_gt_reset_lock+0x35/0x380 [i915] <4> [214.289081] ? find_held_lock+0x2b/0x80 <4> [214.289084] ? _intel_gt_reset_lock+0x35/0x380 [i915] <4> [214.289182] _intel_gt_reset_lock+0x50/0x380 [i915] <4> [214.289278] ? _intel_gt_reset_lock+0x35/0x380 [i915] <4> [214.289373] ? lockdep_hardirqs_on+0xc3/0x140 <4> [214.289375] ? _raw_spin_unlock_irqrestore+0x41/0x70 <4> [214.289379] guc_timestamp_ping+0x71/0x120 [i915] <4> [214.289508] ? process_scheduled_works+0x264/0x530 <4> [214.289510] process_scheduled_works+0x2db/0x530 <4> [214.289512] worker_thread+0x18c/0x350 <4> [214.289514] ? __pfx_worker_thread+0x10/0x10 <4> [214.289516] kthread+0xfe/0x130 <4> [214.289518] ? __pfx_kthread+0x10/0x10 <4> [214.289520] ret_from_fork+0x2c/0x50 <4> [214.289521] ? __pfx_kthread+0x10/0x10 <4> [214.289523] ret_from_fork_asm+0x1b/0x30 <4> [214.289526] </TASK> <7> [214.922968] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD off <7> [214.923658] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [214.924135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [214.924645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.925135] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.925528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.925856] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [214.926245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.926276] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long <7> [214.926609] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.926650] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [214.927069] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A] <7> [214.927561] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.928198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.928747] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [214.929001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [214.929203] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [214.929324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [214.929481] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.027167] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [215.027261] [drm:drm_mode_setcrtc] [CONNECTOR:185:eDP-1] <7> [215.027447] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:185:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [215.028291] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:184:DDI A/PHY A][CRTC:80:pipe A] DP link limits: pixel clock 538600 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7> [215.029115] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7> [215.029742] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 2019750 available 2160000 <7> [215.030318] i915 0000:00:02.0: [drm:intel_dp_audio_compute_config [i915]] [CONNECTOR:185:eDP-1] SDP split enable: no <7> [215.030836] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [215.031409] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:184:DDI A/PHY A] [CRTC:80:pipe A] <7> [215.031817] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [215.031997] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [215.032144] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [215.032295] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [215.032462] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [215.032604] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [215.032744] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840) <7> [215.032910] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000) <7> [215.033057] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840) <7> [215.033216] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000) <7> [215.033396] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888) <7> [215.033578] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920) <7> [215.033760] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160) <7> [215.033928] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2160) <7> [215.034070] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2163) <7> [215.034212] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2168) <7> [215.034344] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2244) <7> [215.034510] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2244) <7> [215.034687] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840) <7> [215.034862] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000) <7> [215.035022] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840) <7> [215.035168] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000) <7> [215.035309] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888) <7> [215.035448] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920) <7> [215.035599] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160) <7> [215.035768] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2160) <7> [215.035941] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2163) <7> [215.036110] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2168) <7> [215.036277] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2244) <7> [215.036436] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2244) <7> [215.036568] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [215.036703] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [215.036875] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [215.037033] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [215.037211] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [215.037393] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [215.037647] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [215.037828] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [215.038004] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027 <7> [215.038151] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69 <7> [215.038314] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [215.038477] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 <7> [215.038651] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 <7> [215.038819] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 <7> [215.038978] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2154400 num active planes 1 <7> [215.039153] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263 <7> [215.039301] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263 <7> [215.039446] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263 <7> [215.039601] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263 <7> [215.039781] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263 <7> [215.039959] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263 <7> [215.040124] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263 <7> [215.040288] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (269300 kHz) > [CRTC:80:pipe A] min cdclk (0 kHz) <7> [215.040429] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (42079 kHz) > old min cdclk (0 kHz) <7> [215.040561] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [215.040702] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz <7> [215.040873] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [215.041050] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:80:pipe A] allocated DPLL 0 <7> [215.041246] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:80:pipe A] reserving DPLL 0 <7> [215.041431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7> [215.041582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [215.041741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [215.041917] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [215.042090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [215.042269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [215.042443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [215.042635] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 522928, link_n: 524288, tu: 64 <7> [215.042814] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [215.042959] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: disabled <7> [215.043102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [215.043243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [215.043410] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7> [215.043412] i915 0000:00:02.0: pixelformat: RGB <7> [215.043413] i915 0000:00:02.0: colorimetry: sRGB <7> [215.043415] i915 0000:00:02.0: bpc: 0 <7> [215.043416] i915 0000:00:02.0: dynamic range: VESA range <7> [215.043418] i915 0000:00:02.0: content type: Not defined <7> [215.043419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7> [215.043594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [215.043773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [215.043947] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa <7> [215.044100] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [215.044245] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa <7> [215.044385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3840x2160+0+0, pixel rate 538600 <7> [215.044542] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 60, ips linetime: 0 <7> [215.044719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [215.044888] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [215.045053] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [215.045218] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [215.045378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [215.045523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [215.045674] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [215.045836] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [215.045975] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [215.046114] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [215.046253] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [215.046393] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [215.046537] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [215.046688] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [215.046856] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [215.047019] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [215.047187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:220] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [215.047352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [215.047491] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0 <7> [215.047638] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [215.047804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [215.047967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [215.048147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [215.048320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7> [215.060845] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.061103] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [215.061484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [215.061880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [215.062473] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [215.063255] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [215.063927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [215.064447] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [215.064772] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [215.065253] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [215.068984] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.069208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.071975] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.072453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.073870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.075345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.075730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.076364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7> [215.076565] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [215.076804] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=768 <7> [215.077029] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:184:DDI A/PHY A] <7> [215.077220] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:193:DDI B/PHY B] <7> [215.077369] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:202:DDI TC1/PHY TC1] <7> [215.077539] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:204:DP-MST A] <7> [215.077734] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:205:DP-MST B] <7> [215.078047] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:206:DP-MST C] <7> [215.078361] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:211:DDI TC2/PHY TC2] <7> [215.078670] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:213:DP-MST A] <7> [215.078852] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:214:DP-MST B] <7> [215.079018] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:215:DP-MST C] <7> [215.079203] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [215.079422] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [215.079640] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [215.079831] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [215.080143] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [215.080296] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [215.080477] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [215.080717] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [215.081083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [215.081406] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:80:pipe A] <7> [215.081567] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [215.081804] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turn panel power on <7> [215.082010] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [215.530999] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [215.531472] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [215.531919] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power on <7> [215.532377] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [215.594131] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [215.594829] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long <7> [215.595424] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [215.596051] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A] <7> [215.743963] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [215.744703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A <7> [215.745664] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD on <7> [215.746442] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [215.748920] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 44 41 00 00 01 c0 02 00 02 00 00 0b 80 <7> [215.748992] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [215.750085] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 06 <7> [215.751200] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [215.751673] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [215.752985] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Clock recovery OK <7> [215.753363] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7> [215.755116] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [215.755528] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [215.756369] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [215.756967] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [215.757377] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [215.757816] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:185:eDP-1] Performing OUI wait (0 ms) <7> [215.758765] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:185:eDP-1] set backlight PWM = 96000 <7> [215.773930] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [215.774754] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7> [215.776452] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:185:eDP-1] <7> [215.777208] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7> [215.778263] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [215.779268] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1] <6> [215.780895] [IGT] kms_pm_rpm: finished subtest basic-pci-d3-state, SUCCESS <7> [215.780810] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.782036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [215.782396] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [215.782735] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [215.783079] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [215.783466] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [215.783484] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [215.783493] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor <7> [215.783501] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0 <7> [215.783535] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no <7> [215.783897] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [215.784886] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.785215] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [215.786026] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [215.786406] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [215.786781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <7> [215.794797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.795443] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [215.809450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.846659] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:220] from all active usage due to RMFB ioctl <7> [215.846764] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:220] is removed <7> [215.846902] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0 <7> [215.847548] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [215.848150] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [215.848784] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [215.849367] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [215.849972] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0 <7> [215.850608] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0 <7> [215.851176] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0 <7> [215.851732] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0 <7> [215.852248] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0 <7> [215.852748] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0 <7> [215.853203] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0 <7> [215.853610] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0 <7> [215.854092] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2 <7> [215.877979] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027 <7> [215.878686] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,*stwm <7> [215.879259] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 <7> [215.879832] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 <7> [215.880425] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 <7> [215.881039] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2154400 num active planes 1 <7> [215.881700] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263 <7> [215.882264] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263 <7> [215.882780] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263 <7> [215.883286] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263 <7> [215.883855] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263 <7> [215.884328] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263 <7> [215.884743] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263 <7> [215.892952] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <6> [215.898589] [IGT] kms_pm_rpm: exiting, ret=0 <6> [215.910443] Console: switching to colour frame buffer device 480x135

<7> [209.718133] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]

<7> [209.718147] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [209.718370] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected

<7> [209.718821] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]

<7> [209.718828] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [209.719038] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected

<7> [209.719508] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]

<7> [209.719513] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<7> [209.719735] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected

<7> [209.720262] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]

<7> [209.720267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]

<7> [209.721061] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [209.721647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [209.721800] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [209.721953] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [209.722118] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [209.722320] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [209.722330] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [209.722334] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor

<7> [209.722338] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0

<7> [209.722358] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no

<7> [209.722523] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [209.723443] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [209.723612] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [209.724322] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :

<7> [209.724329] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [209.724336] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [209.724369] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]

<7> [209.724375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [209.724551] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected

<7> [209.724574] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]

<7> [209.724579] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [209.724783] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected

<7> [209.724804] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]

<7> [209.724808] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<7> [209.724997] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected

<7> [209.725032] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]

<7> [209.725036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]

<7> [209.725827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [209.726440] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [209.726600] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [209.726787] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [209.726928] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [209.727080] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [209.727089] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [209.727093] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor

<7> [209.727096] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0

<7> [209.727113] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no

<7> [209.727246] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [209.728020] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [209.728182] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [209.728866] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :

<7> [209.728873] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [209.728879] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [209.728970] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]

<7> [209.728976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [209.729222] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected

<7> [209.729293] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]

<7> [209.729298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [209.729477] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected

<7> [209.729538] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]

<7> [209.729542] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<7> [209.729731] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected

<7> [210.772945] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [210.773418] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [210.773820] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [210.774189] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [210.774539] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7843931/8388608 link 522928/524288, found tu 0, data 0/0 link 0/0)

<7> [210.774903] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [210.775247] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [210.775580] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0)

<7> [210.775928] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0)

<7> [210.776270] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0)

<7> [210.776588] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0)

<7> [210.776736] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0)

<7> [210.776887] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0)

<7> [210.777016] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0)

<7> [210.777145] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2160, found 0)

<7> [210.777273] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2163, found 0)

<7> [210.777400] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2168, found 0)

<7> [210.777527] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2244, found 0)

<7> [210.777664] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2244, found 0)

<7> [210.777809] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0)

<7> [210.777938] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0)

<7> [210.778063] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0)

<7> [210.778187] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0)

<7> [210.778311] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0)

<7> [210.778435] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0)

<7> [210.778559] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0)

<7> [210.778696] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2160, found 0)

<7> [210.778840] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2163, found 0)

<7> [210.778976] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2168, found 0)

<7> [210.779102] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2244, found 0)

<7> [210.779228] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2244, found 0)

<7> [210.779352] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [210.779477] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [210.779600] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [210.779737] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [210.779879] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 538600, found 0)

<7> [210.780019] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 538600, found 0)

<7> [210.780157] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [210.780296] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [210.780446] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:80:pipe A] releasing DPLL 0

<7> [210.780650] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [210.780801] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [210.780970] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0

<7> [210.781108] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0

<7> [210.781243] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [210.781377] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [210.781512] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [210.781661] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [210.781807] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0

<7> [210.781971] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0

<7> [210.782120] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0

<7> [210.782266] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0

<7> [210.782410] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0

<7> [210.782563] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0

<7> [210.782720] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0

<7> [210.782870] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0

<7> [210.783034] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [210.783180] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz

<7> [210.783333] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [210.783487] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [modeset]

<7> [210.783645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [210.783799] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [210.783943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [210.784088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [210.784243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [210.784424] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no

<7> [210.784715] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2

<7> [210.788143] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [210.994930] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:185:eDP-1] set backlight PWM = 0

<7> [210.995858] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [211.005569] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turn panel power off

<7> [211.006289] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [211.006907] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [211.060137] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [211.060832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A

<7> [211.061355] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [211.061504] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:80:pipe A]

<7> [211.062026] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long

<7> [211.062250] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [211.062663] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [211.062987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [211.063430] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A]

<7> [211.063700] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [211.064492] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=448

<7> [211.065054] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:184:DDI A/PHY A]

<7> [211.065576] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:193:DDI B/PHY B]

<7> [211.065858] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:202:DDI TC1/PHY TC1]

<7> [211.066009] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:204:DP-MST A]

<7> [211.066148] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:205:DP-MST B]

<7> [211.066280] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:206:DP-MST C]

<7> [211.066429] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:211:DDI TC2/PHY TC2]

<7> [211.066600] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:213:DP-MST A]

<7> [211.066786] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:214:DP-MST B]

<7> [211.066963] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:215:DP-MST C]

<7> [211.067119] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:185:eDP-1]

<7> [211.067288] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [211.067454] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [211.067603] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [211.067763] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [211.067936] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [211.068105] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [211.068285] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [211.068496] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [211.068755] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [211.069002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A

<7> [211.069198] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A]

<7> [211.087989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [211.088714] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.089242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.090100] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.091777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [211.094401] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [211.095520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [211.096399] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [211.097181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [211.097754] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [211.098114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [211.098744] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [211.173231] [IGT] kms_pm_rpm: starting subtest basic-pci-d3-state

<7> [211.196192] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [211.196474] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [211.196889] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [211.197296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [211.197739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.198182] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.198564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [211.199611] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [211.200010] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [211.200527] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [211.204797] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.205073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.210336] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [211.210966] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [211.211408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.212402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [211.213083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [211.214946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]

<7> [211.215303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [211.215846] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD on

<7> [211.216068] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [211.667106] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [211.667548] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [211.668044] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [211.668393] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [211.730316] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [211.731018] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long

<7> [211.731605] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [211.732293] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A]

<7> [211.876609] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.877760] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [211.878146] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [211.878511] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [211.878897] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [211.879653] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [211.879675] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [211.879687] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor

<7> [211.879698] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0

<7> [211.879778] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no

<7> [211.880015] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [211.880822] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.880961] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [211.881609] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [211.881885] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [211.882134] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<4> [214.284092] ======================================================

<4> [214.284096] WARNING: possible circular locking dependency detected

<4> [214.284103] ------------------------------------------------------

<4> [214.284109] ffff88810558d8e8 (&gt->reset.backoff_srcu){++++}-{0:0}, at: _intel_gt_reset_lock+0x35/0x380 [i915]

<4> [214.284462] ffffc9000021fe58 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530

-> #3 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}:

<4> [214.284501] intel_guc_submission_reset_prepare+0x81/0x4b0 [i915]

&gt->reset.backoff_srcu --> &gt->reset.mutex --> (work_completion)(&(&guc->timestamp.work)->work)

<4> [214.288811] lock((work_completion)(&(&guc->timestamp.work)->work));

<4> [214.288813] lock((work_completion)(&(&guc->timestamp.work)->work));

<4> [214.288818] #0: ffff888100079b38 ((wq_completion)events_highpri){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530

<4> [214.288822] #1: ffffc9000021fe58 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530

<4> [214.288827] CPU: 2 PID: 27 Comm: kworker/2:0H Not tainted 6.7.0-linus-v6.7-g0dd3ee311255+ #1

<4> [214.288829] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-N LP5 RVP, BIOS ADLNFWI1.R00.3362.A00.2208311605 08/31/2022

<4> [214.288831] Workqueue: events_highpri guc_timestamp_ping [i915]

<7> [214.922968] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD off

<7> [214.923658] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [214.924135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [214.924645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.925135] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.925528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.925856] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [214.926245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.926276] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long

<7> [214.926609] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.926650] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [214.927069] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A]

<7> [214.927561] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.928198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.928747] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [214.929001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [214.929203] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [214.929324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [214.929481] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.027447] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:185:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [215.028291] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:184:DDI A/PHY A][CRTC:80:pipe A] DP link limits: pixel clock 538600 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000

<7> [215.029115] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30

<7> [215.029742] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 2019750 available 2160000

<7> [215.030318] i915 0000:00:02.0: [drm:intel_dp_audio_compute_config [i915]] [CONNECTOR:185:eDP-1] SDP split enable: no

<7> [215.030836] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [215.031409] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:184:DDI A/PHY A] [CRTC:80:pipe A]

<7> [215.031817] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [215.031997] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [215.032144] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [215.032295] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [215.032462] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [215.032604] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [215.032744] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840)

<7> [215.032910] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000)

<7> [215.033057] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840)

<7> [215.033216] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000)

<7> [215.033396] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888)

<7> [215.033578] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920)

<7> [215.033760] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160)

<7> [215.033928] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2160)

<7> [215.034070] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2163)

<7> [215.034212] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2168)

<7> [215.034344] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2244)

<7> [215.034510] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2244)

<7> [215.034687] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840)

<7> [215.034862] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000)

<7> [215.035022] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840)

<7> [215.035168] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000)

<7> [215.035309] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888)

<7> [215.035448] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920)

<7> [215.035599] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160)

<7> [215.035768] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2160)

<7> [215.035941] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2163)

<7> [215.036110] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2168)

<7> [215.036277] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2244)

<7> [215.036436] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2244)

<7> [215.036568] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [215.036703] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [215.036875] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [215.037033] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [215.037211] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [215.037393] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [215.037647] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [215.037828] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [215.038004] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027

<7> [215.038151] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69

<7> [215.038314] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [215.038477] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0

<7> [215.038651] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201

<7> [215.038819] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207

<7> [215.038978] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2154400 num active planes 1

<7> [215.039153] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263

<7> [215.039301] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263

<7> [215.039446] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263

<7> [215.039601] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263

<7> [215.039781] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263

<7> [215.039959] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263

<7> [215.040124] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263

<7> [215.040288] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (269300 kHz) > [CRTC:80:pipe A] min cdclk (0 kHz)

<7> [215.040429] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (42079 kHz) > old min cdclk (0 kHz)

<7> [215.040561] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [215.040702] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz

<7> [215.040873] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [215.041050] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:80:pipe A] allocated DPLL 0

<7> [215.041246] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:80:pipe A] reserving DPLL 0

<7> [215.041431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset]

<7> [215.041582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [215.041741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [215.041917] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [215.042090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [215.042269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [215.042443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [215.042635] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 522928, link_n: 524288, tu: 64

<7> [215.042814] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [215.042959] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: disabled

<7> [215.043102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [215.043243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [215.043410] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0

<7> [215.043419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0

<7> [215.043594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [215.043773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [215.043947] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa

<7> [215.044100] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [215.044245] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa

<7> [215.044385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3840x2160+0+0, pixel rate 538600

<7> [215.044542] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 60, ips linetime: 0

<7> [215.044719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [215.044888] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [215.045053] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [215.045218] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [215.045378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [215.045523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [215.045674] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [215.045836] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [215.045975] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [215.046114] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [215.046253] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [215.046393] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [215.046537] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [215.046688] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [215.046856] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [215.047019] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [215.047187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:220] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [215.047352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [215.047491] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0

<7> [215.047638] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [215.047804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [215.047967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [215.048147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [215.048320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no

<7> [215.060845] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.061103] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [215.061484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [215.061880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [215.062473] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [215.063255] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [215.063927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [215.064447] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [215.064772] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [215.065253] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [215.068984] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.069208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.071975] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.072453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.073870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.075345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.075730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.076364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A

<7> [215.076565] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [215.076804] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=768

<7> [215.077029] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:184:DDI A/PHY A]

<7> [215.077220] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:193:DDI B/PHY B]

<7> [215.077369] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:202:DDI TC1/PHY TC1]

<7> [215.077539] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:204:DP-MST A]

<7> [215.077734] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:205:DP-MST B]

<7> [215.078047] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:206:DP-MST C]

<7> [215.078361] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:211:DDI TC2/PHY TC2]

<7> [215.078670] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:213:DP-MST A]

<7> [215.078852] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:214:DP-MST B]

<7> [215.079018] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:215:DP-MST C]

<7> [215.079203] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [215.079422] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [215.079640] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [215.079831] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [215.080143] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [215.080296] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [215.080477] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [215.080717] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [215.081083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [215.081406] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:80:pipe A]

<7> [215.081567] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [215.081804] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turn panel power on

<7> [215.082010] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [215.530999] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [215.531472] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [215.531919] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power on

<7> [215.532377] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [215.594131] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [215.594829] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long

<7> [215.595424] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [215.596051] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A]

<7> [215.743963] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [215.744703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A

<7> [215.745664] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD on

<7> [215.746442] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [215.748920] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 44 41 00 00 01 c0 02 00 02 00 00 0b 80

<7> [215.748992] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [215.750085] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 06

<7> [215.751200] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [215.751673] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [215.752985] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Clock recovery OK

<7> [215.753363] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using DP training pattern TPS3

<7> [215.755116] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [215.755528] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [215.756369] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [215.756967] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [215.757377] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [215.757816] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:185:eDP-1] Performing OUI wait (0 ms)

<7> [215.758765] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:185:eDP-1] set backlight PWM = 96000

<7> [215.773930] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [215.774754] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2

<7> [215.776452] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:185:eDP-1]

<7> [215.777208] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A]

<7> [215.778263] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [215.779268] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]

<6> [215.780895] [IGT] kms_pm_rpm: finished subtest basic-pci-d3-state, SUCCESS

<7> [215.780810] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.782036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [215.782396] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [215.782735] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [215.783079] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [215.783466] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [215.783484] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [215.783493] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor

<7> [215.783501] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0

<7> [215.783535] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no

<7> [215.783897] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [215.784886] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.785215] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [215.786026] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [215.786406] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [215.786781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<7> [215.794797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.795443] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [215.809450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.846659] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:220] from all active usage due to RMFB ioctl

<7> [215.846764] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:220] is removed

<7> [215.846902] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0

<7> [215.847548] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [215.848150] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [215.848784] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [215.849367] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [215.849972] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0

<7> [215.850608] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0

<7> [215.851176] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0

<7> [215.851732] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0

<7> [215.852248] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0

<7> [215.852748] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0

<7> [215.853203] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0

<7> [215.853610] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0

<7> [215.854092] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2

<7> [215.877979] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027

<7> [215.878686] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [215.879259] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0

<7> [215.879832] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201

<7> [215.880425] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207

<7> [215.881039] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2154400 num active planes 1

<7> [215.881700] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263

<7> [215.882264] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263

<7> [215.882780] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263

<7> [215.883286] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263

<7> [215.883855] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263

<7> [215.884328] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263

<7> [215.884743] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263

<7> [215.892952] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2

<6> [215.910443] Console: switching to colour frame buffer device 480x135

Results for igt@kms_pm_rpm@basic-pci-d3-state