Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 1.28-g619c3f3ff (x86_64) (Linux: 6.7.0-rc8-linus-v6.7-rc8-g610a9b8f49fb+ x86_64)
Out 
Using IGT_SRANDOM=1704057414 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.023s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.023s)
Dmesg
<6> [159.044976] Console: switching to colour dummy device 80x25
<6> [159.045174] [IGT] kms_force_connector_basic: executing
<7> [159.048248] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [159.049058] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [159.049269] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [159.049895] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [159.049904] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.049912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.050105] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [159.050138] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.050144] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.050319] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [159.050365] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.050370] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.050534] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<6> [159.050762] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [159.050889] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [159.050895] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.050900] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.051293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [159.051435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [159.051821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [159.051969] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [159.051982] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [159.052119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [159.058039] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [159.058050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [159.058194] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] status updated from disconnected to connected
<7> [159.058324] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [159.058329] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [159.058334] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [159.058339] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [159.058343] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [159.058347] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [159.058389] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.058393] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.058790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [159.058938] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [159.059292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [159.059436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [159.059446] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [159.059582] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [159.064097] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [159.064110] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [159.064308] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [159.064313] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [159.064318] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [159.064322] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [159.064326] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [159.064329] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [159.064529] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:194:HDMI-A-1] EDID override set
<7> [159.064549] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.064554] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.064715] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD monitor IGT
<7> [159.064736] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD size 24, SAD count 0
<7> [159.064967] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [159.065108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [159.065458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [159.065592] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [159.065687] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [159.065693] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [159.065699] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [159.065703] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [159.065710] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [159.065713] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [159.065717] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [159.065739] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [159.065743] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [159.065746] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [159.065750] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [159.065881] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:194:HDMI-A-1] EDID override set
<7> [159.065904] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.065908] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.066075] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD monitor IGT
<7> [159.066080] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD size 24, SAD count 0
<7> [159.066085] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:194:HDMI-A-1] EDID changed, epoch counter 4
<7> [159.066320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [159.066457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [159.066815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [159.066952] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [159.067039] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [159.067044] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [159.067050] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [159.067054] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [159.067057] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [159.067061] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [159.067065] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [159.067068] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [159.067178] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:194:HDMI-A-1] EDID override reset
<7> [159.067200] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.067204] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.067575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [159.067713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [159.068065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [159.068200] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [159.068208] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [159.068337] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [159.072746] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [159.072755] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [159.072890] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:194:HDMI-A-1] EDID changed, epoch counter 5
<7> [159.072946] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [159.072950] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [159.072956] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [159.072961] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [159.072966] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [159.072969] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [159.072973] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [159.072976] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [159.072980] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [159.072983] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [159.073118] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [159.073124] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.073129] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.073292] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] status updated from connected to disconnected
<7> [159.073306] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [159.073417] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.073422] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.073588] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<6> [159.073841] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [159.073976] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [159.074492] [drm:status_store] [CONNECTOR:185:eDP-1] force updated from 0 to 0 or reprobing
<7> [159.074498] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [159.074504] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [159.075299] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [159.076023] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [159.076191] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [159.076345] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [159.076488] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [159.076654] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [159.076662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [159.076667] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [159.076671] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [159.076691] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [159.076864] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [159.077677] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [159.077845] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [159.078560] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [159.078567] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [159.078573] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [159.078624] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [159.078630] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [159.079425] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [159.080023] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [159.080169] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [159.080315] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [159.080459] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [159.080614] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [159.080620] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [159.080624] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [159.080628] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [159.080643] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [159.080796] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [159.081572] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [159.081715] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [159.082401] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [159.082406] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [159.082411] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [159.082535] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:185:eDP-1] EDID override reset
<7> [159.082555] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [159.082560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [159.083338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [159.083947] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [159.084085] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [159.084221] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [159.084362] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [159.084518] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [159.084523] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [159.084527] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [159.084531] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [159.084545] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [159.084683] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [159.085474] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [159.085615] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [159.086289] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [159.086294] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [159.086299] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [159.086457] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [159.086463] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.086469] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.086642] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [159.086680] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.086684] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.086858] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [159.086955] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:194:HDMI-A-1] EDID override reset
<7> [159.086973] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.086977] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.087154] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [159.087253] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:203:DP-1] EDID override reset
<7> [159.087269] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]
<7> [159.087274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]
<7> [159.087453] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected
<7> [159.087550] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:212:DP-2] EDID override reset
<7> [159.087566] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]
<7> [159.087570] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]
<7> [159.087759] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected
<6> [159.088236] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [159.088345] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [159.088351] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.088356] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.088530] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [159.088574] [drm:status_store] [CONNECTOR:185:eDP-1] force updated from 0 to 0 or reprobing
<7> [159.088579] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [159.088584] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [159.089390] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [159.089986] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [159.090125] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [159.090259] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [159.090392] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [159.090548] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [159.090555] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [159.090560] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [159.090564] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [159.090581] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [159.090719] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [159.091523] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [159.091688] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [159.092432] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [159.092438] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [159.092444] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [159.092673] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [159.119684] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [159.119694] [drm:drm_client_modeset_probe]
<7> [159.119762] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [159.119772] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [159.120800] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [159.122043] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [159.122443] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [159.122635] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [159.122849] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [159.123078] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [159.123088] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [159.123095] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [159.123101] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [159.123125] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [159.123465] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [159.124752] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [159.125091] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [159.126235] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [159.126248] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [159.126260] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [159.126272] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [159.126284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [159.126626] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [159.126638] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]
<7> [159.126648] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]
<7> [159.127037] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected
<7> [159.127049] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]
<7> [159.127059] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]
<7> [159.127426] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected
<7> [159.127436] [drm:drm_client_modeset_probe] connector 185 enabled? yes
<7> [159.127445] [drm:drm_client_modeset_probe] connector 194 enabled? no
<7> [159.127452] [drm:drm_client_modeset_probe] connector 203 enabled? no
<7> [159.127457] [drm:drm_client_modeset_probe] connector 212 enabled? no
<7> [159.127518] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [159.127541] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 185
<7> [159.127548] [drm:drm_client_modeset_probe] looking for preferred mode on connector 185 0
<7> [159.127554] [drm:drm_client_modeset_probe] found mode 3840x2160
<7> [159.127560] [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [159.127591] [drm:drm_client_modeset_probe] desired mode 3840x2160 set on crtc 80 (0,0)
<6> [159.154245] Console: switching to colour frame buffer device 480x135
Created at 2023-12-31 22:48:26