igt@i915_selftest@live@reset on fi-kbl-guc@linus-v6.7-rc7 Test details

Detail	Value
Duration	1.12 seconds
Igt-Version	IGT-Version: 1.28-g659c00b78 (x86_64) (Linux: 6.7.0-rc7-linus-v6.7-rc7-g861deac3b092+ x86_64)
Out	Starting dynamic subtest: reset Dynamic subtest reset: SUCCESS (1.119s)
Err	Starting dynamic subtest: reset Dynamic subtest reset: SUCCESS (1.119s)
Dmesg	<6> [199.938399] [IGT] i915_selftest: starting dynamic subtest reset <5> [200.048617] Setting dangerous option enable_guc - tainting kernel <5> [200.048625] Setting dangerous option live_selftests - tainting kernel <7> [200.093973] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [200.094264] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [200.094415] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [200.094426] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [200.094572] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [200.094775] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [200.094900] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [200.095479] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [200.095606] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [200.095720] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [200.095833] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [200.095838] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [200.096118] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [200.096137] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [200.096279] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [200.096631] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018 <7> [200.096793] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [200.096926] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [200.097083] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [200.097229] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [200.101509] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [200.101661] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [200.101799] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [200.101937] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [200.102118] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [200.102232] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [200.102329] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [200.102423] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [200.102517] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [200.102610] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [200.102703] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [200.102796] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [200.102893] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [200.103043] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [200.103577] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [200.103738] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [200.103897] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [200.104071] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [200.104218] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [200.104363] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [200.104510] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [200.104656] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [200.104801] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [200.104947] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [200.105108] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [200.105257] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [200.105398] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [200.105539] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [200.105680] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [200.105828] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [200.105975] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [200.106137] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [200.106279] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [200.106421] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [200.106561] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [200.106702] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [200.106842] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [200.106984] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [200.107136] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [200.107290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [200.107475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [200.107635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [200.107780] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [200.108297] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [200.108447] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [200.108604] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [200.108795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.108936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [200.109096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [200.109249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [200.109430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [200.109574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [200.109716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [200.109858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [200.110041] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [200.110673] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [200.111067] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [200.111131] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [200.111273] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [200.111412] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [200.111559] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [200.111695] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [200.111858] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [200.111996] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [200.112155] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [200.112297] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [200.112429] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [200.113944] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [200.115104] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [200.115332] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [200.115463] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [200.115814] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [200.115942] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [200.116206] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] Using AUX CH A (VBT) <7> [200.116359] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E] <7> [200.116631] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [200.117072] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [200.117248] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [200.117411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [200.117554] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [200.117700] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [200.117849] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [200.118038] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [200.118188] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [200.118331] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [200.118473] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [200.118615] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [200.118757] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [200.118928] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [200.119090] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [200.119278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A <7> [200.119451] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [200.119601] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [200.119748] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [200.119897] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [200.120089] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [200.120284] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [200.120492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [200.120633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [200.120769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [200.120904] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [200.121050] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [200.121197] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [200.121375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [200.121568] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [200.121707] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [200.121851] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [200.121988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [200.122139] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [200.122278] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [200.122499] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [200.122688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [200.122830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [200.122972] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [200.123128] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [200.123264] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [200.123400] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [200.125976] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [200.126128] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [200.126242] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [200.126361] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [200.126496] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global <7> [200.127494] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [200.127638] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [200.127784] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0 <7> [200.130691] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [200.130875] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [200.131052] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [200.158758] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [200.158931] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [200.159091] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [200.159227] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [200.159361] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [200.159495] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004 <7> [200.159630] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [200.159768] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [200.159907] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [200.160062] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [200.160197] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [200.160330] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [200.160464] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [200.160598] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [200.160731] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [200.162079] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [200.162084] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [200.168860] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [200.169546] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [200.169703] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [200.169706] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [200.177974] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [200.178109] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [200.178212] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [200.178313] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [200.178626] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [200.178883] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [200.179036] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [200.179173] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [200.179307] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [200.179457] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [200.183684] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [200.184052] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [200.184457] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1 <7> [200.185253] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <6> [200.185302] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [200.187287] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [200.202684] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [200.203695] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input74 <7> [200.204388] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [200.205052] i915 display info: display version: 9 <7> [200.205056] i915 display info: cursor_needs_physical: no <7> [200.205056] [drm:drm_client_modeset_probe] <7> [200.205059] i915 display info: has_cdclk_crawl: no <7> [200.205061] i915 display info: has_cdclk_squash: no <7> [200.205063] i915 display info: has_ddi: yes <7> [200.205066] i915 display info: has_dp_mst: yes <7> [200.205069] i915 display info: has_dsb: no <7> [200.205072] i915 display info: has_fpga_dbg: yes <7> [200.205075] i915 display info: has_gmch: no <7> [200.205077] i915 display info: has_hotplug: yes <7> [200.205080] i915 display info: has_hti: no <7> [200.205083] i915 display info: has_ipc: yes <7> [200.205086] i915 display info: has_overlay: no <7> [200.205089] i915 display info: has_psr: yes <7> [200.205092] i915 display info: has_psr_hw_tracking: yes <7> [200.205095] i915 display info: overlay_needs_physical: no <7> [200.205098] i915 display info: supports_tv: no <7> [200.205101] i915 display info: has_hdcp: yes <7> [200.205099] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [200.205104] i915 display info: has_dmc: yes <7> [200.205107] i915 display info: has_dsc: no <7> [200.205106] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [200.205112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [200.205282] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [200.205297] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [200.205304] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [200.205311] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [200.205362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [200.205502] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [200.205514] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [200.205520] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [200.205526] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [200.205578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [200.205713] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [200.205724] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [200.205730] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [200.205734] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [200.205738] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [200.205741] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [200.205759] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [200.205770] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [200.205791] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [200.205802] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [200.205796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [200.206411] [drm:drm_client_modeset_probe] <7> [200.206451] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [200.206459] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [200.206652] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [200.206659] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [200.206571] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [200.206666] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [200.206785] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [200.206790] i915 device info: graphics version: 9 <7> [200.206792] i915 device info: media version: 9 <7> [200.206795] i915 device info: graphics stepping: F0 <7> [200.206798] i915 device info: media stepping: F0 <7> [200.206800] i915 device info: display stepping: C0 <7> [200.206802] i915 device info: base die stepping: ** <7> [200.206805] i915 device info: gt: 2 <7> [200.206807] i915 device info: memory-regions: 0x21 <7> [200.206810] i915 device info: page-sizes: 0x11000 <7> [200.206812] i915 device info: platform: KABYLAKE <7> [200.206815] i915 device info: ppgtt-size: 48 <7> [200.206817] i915 device info: ppgtt-type: 2 <7> [200.206820] i915 device info: dma_mask_size: 39 <7> [200.206822] i915 device info: is_mobile: no <7> [200.206824] i915 device info: is_lp: no <7> [200.206827] i915 device info: require_force_probe: no <7> [200.206829] i915 device info: is_dgfx: no <7> [200.206832] i915 device info: has_64bit_reloc: yes <7> [200.206834] i915 device info: has_64k_pages: no <7> [200.206837] i915 device info: gpu_reset_clobbers_display: no <7> [200.206839] i915 device info: has_reset_engine: yes <7> [200.206842] i915 device info: has_3d_pipeline: yes <7> [200.206844] i915 device info: has_flat_ccs: no <7> [200.206847] i915 device info: has_global_mocs: no <7> [200.206849] i915 device info: has_gmd_id: no <7> [200.206852] i915 device info: has_gt_uc: yes <7> [200.206856] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [200.206861] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [200.206869] i915 device info: has_heci_pxp: no <7> [200.206872] i915 device info: has_heci_gscfi: no <7> [200.206875] i915 device info: has_guc_deprivilege: no <7> [200.206878] i915 device info: has_guc_tlb_invalidation: no <7> [200.206881] i915 device info: has_l3_ccs_read: no <7> [200.206884] i915 device info: has_l3_dpf: no <7> [200.206887] i915 device info: has_llc: yes <7> [200.206890] i915 device info: has_logical_ring_contexts: yes <7> [200.206893] i915 device info: has_logical_ring_elsq: no <7> [200.206895] i915 device info: has_media_ratio_mode: no <7> [200.206898] i915 device info: has_mslice_steering: no <7> [200.206901] i915 device info: has_oa_bpc_reporting: no <7> [200.206904] i915 device info: has_oa_slice_contrib_limits: no <7> [200.206907] i915 device info: has_oam: no <7> [200.206910] i915 device info: has_one_eu_per_fuse_bit: no <7> [200.206913] i915 device info: has_pxp: no <7> [200.206916] i915 device info: has_rc6: yes <7> [200.206919] i915 device info: has_rc6p: no <7> [200.206921] i915 device info: has_rps: yes <7> [200.206924] i915 device info: has_runtime_pm: yes <7> [200.206927] i915 device info: has_snoop: no <7> [200.206930] i915 device info: has_coherent_ggtt: yes <7> [200.206933] i915 device info: tuning_thread_rr_after_dep: no <7> [200.206936] i915 device info: unfenced_needs_alignment: no <7> [200.206939] i915 device info: hws_needs_physical: no <7> [200.206942] i915 device info: has_pooled_eu: no <7> [200.206945] i915 device info: rawclk rate: 24000 kHz <7> [200.206948] i915 device info: iommu: enabled <7> [200.206951] i915 device info: available engines: 40403 <7> [200.206954] i915 device info: slice total: 1, mask=0001 <7> [200.206958] i915 device info: subslice total: 3 <7> [200.206961] i915 device info: slice0: 3 subslices, mask=00000007 <7> [200.206866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [200.206964] i915 device info: slice1: 0 subslices, mask=00000000 <7> [200.206967] i915 device info: slice2: 0 subslices, mask=00000000 <7> [200.206970] i915 device info: EU total: 24 <7> [200.206972] i915 device info: EU per subslice: 8 <7> [200.206975] i915 device info: has slice power gating: no <7> [200.206977] i915 device info: has subslice power gating: no <7> [200.206980] i915 device info: has EU power gating: yes <6> [200.206982] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [200.206985] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [200.206988] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [200.206992] i915: Performing live selftests with st_random_seed=0x9e12ab8 st_timeout=500 <6> [200.206995] i915: Running reset <6> [200.207030] i915: Running intel_reset_live_selftests/igt_global_reset <7> [200.207087] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [200.207094] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [200.207098] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [200.207103] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [200.207107] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [200.207142] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [200.207153] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [200.207172] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [200.207182] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [200.208246] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [200.208294] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [200.212900] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [200.213614] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [200.213840] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [200.213844] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [200.214478] i915: Running intel_reset_live_selftests/igt_reset_device_stolen <6> [200.276131] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [200.276136] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [200.278525] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [200.278792] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [200.278999] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [200.279002] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [200.325173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <6> [200.343111] i915: Running intel_reset_live_selftests/igt_reset_engines_stolen <6> [200.775175] i915: Running intel_reset_live_selftests/igt_wedged_reset <7> [200.775187] intel_gt_set_wedged called from igt_wedged_reset+0x25/0x150 [i915] <6> [200.776435] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [200.776439] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [200.781158] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [200.781740] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [200.781897] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [200.781899] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [200.782110] i915: Running intel_reset_live_selftests/igt_atomic_reset <7> [200.782246] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [200.782892] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [200.782896] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [200.785132] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [200.785365] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [200.785524] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [200.785527] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [200.786151] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [200.786896] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [200.786900] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [200.789168] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [200.789399] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [200.789556] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [200.789558] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [200.790285] i915: Running intel_reset_live_selftests/igt_atomic_engine_reset <7> [200.790310] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [200.791112] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [200.791116] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [200.793511] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [200.793747] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [200.793907] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [200.793910] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [200.795683] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [200.796573] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [200.796577] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [200.799099] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [200.799332] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [200.799485] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [200.799488] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [200.799701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [200.799905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [200.800065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [200.800210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [200.800354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [200.823928] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [200.857410] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [200.901483] i915: probe of 0000:00:02.0 failed with error -25 <6> [201.058049] [IGT] i915_selftest: finished subtest reset, SUCCESS

<6> [199.938399] [IGT] i915_selftest: starting dynamic subtest reset

<5> [200.048617] Setting dangerous option enable_guc - tainting kernel

<5> [200.048625] Setting dangerous option live_selftests - tainting kernel

<7> [200.093973] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [200.094264] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [200.094415] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [200.094426] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [200.094572] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [200.094775] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [200.094900] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [200.095479] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [200.095606] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [200.095720] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [200.095833] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [200.095838] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [200.096118] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [200.096137] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [200.096279] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [200.096631] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018

<7> [200.096793] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [200.096926] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [200.097083] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [200.097229] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [200.101509] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [200.101661] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [200.101799] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [200.101937] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [200.102118] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [200.102232] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [200.102329] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [200.102423] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [200.102517] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [200.102610] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [200.102703] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [200.102796] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [200.102893] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [200.103043] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [200.103577] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [200.103738] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [200.103897] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [200.104071] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [200.104218] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [200.104363] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [200.104510] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [200.104656] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [200.104801] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [200.104947] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [200.105108] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [200.105257] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [200.105398] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [200.105539] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [200.105680] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [200.105828] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [200.105975] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [200.106137] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [200.106279] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [200.106421] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [200.106561] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [200.106702] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [200.106842] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [200.106984] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [200.107136] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [200.107290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [200.107475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [200.107635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [200.107780] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [200.108297] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [200.108447] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [200.108604] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [200.108795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.108936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [200.109096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [200.109249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [200.109430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [200.109574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [200.109716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [200.109858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [200.110041] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [200.110673] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [200.111067] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [200.111131] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [200.111273] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [200.111412] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [200.111559] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [200.111695] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [200.111858] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [200.111996] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [200.112155] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [200.112297] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [200.112429] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [200.113944] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [200.115104] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [200.115332] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [200.115463] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [200.115814] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [200.115942] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [200.116206] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] Using AUX CH A (VBT)

<7> [200.116359] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E]

<7> [200.116631] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [200.117072] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [200.117248] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [200.117411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [200.117554] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [200.117700] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [200.117849] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [200.118038] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [200.118188] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [200.118331] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [200.118473] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [200.118615] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [200.118757] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [200.118928] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [200.119090] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [200.119278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [200.119451] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [200.119601] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [200.119748] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [200.119897] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [200.120089] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [200.120284] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [200.120492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [200.120633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [200.120769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [200.120904] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [200.121050] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [200.121197] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [200.121375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [200.121568] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [200.121707] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [200.121851] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [200.121988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [200.122139] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [200.122278] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [200.122499] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [200.122688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [200.122830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [200.122972] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [200.123128] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [200.123264] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [200.123400] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [200.125976] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [200.126128] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [200.126242] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [200.126361] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [200.126496] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global

<7> [200.127494] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [200.127638] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [200.127784] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0

<7> [200.130691] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [200.130875] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [200.131052] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [200.158758] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [200.158931] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [200.159091] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [200.159227] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [200.159361] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [200.159495] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004

<7> [200.159630] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [200.159768] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [200.159907] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [200.160062] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [200.160197] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [200.160330] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [200.160464] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [200.160598] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [200.160731] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [200.162079] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [200.162084] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [200.168860] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [200.169546] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [200.169703] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [200.169706] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [200.177974] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [200.178109] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [200.178212] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [200.178313] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [200.178626] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [200.178883] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [200.179036] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [200.179173] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [200.179307] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [200.179457] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [200.183684] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [200.184052] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [200.184457] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1

<7> [200.185253] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<6> [200.185302] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [200.187287] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [200.202684] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [200.203695] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input74

<7> [200.204388] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [200.205052] i915 display info: display version: 9

<7> [200.205056] i915 display info: cursor_needs_physical: no

<7> [200.205056] [drm:drm_client_modeset_probe]

<7> [200.205059] i915 display info: has_cdclk_crawl: no

<7> [200.205061] i915 display info: has_cdclk_squash: no

<7> [200.205063] i915 display info: has_ddi: yes

<7> [200.205066] i915 display info: has_dp_mst: yes

<7> [200.205069] i915 display info: has_dsb: no

<7> [200.205072] i915 display info: has_fpga_dbg: yes

<7> [200.205075] i915 display info: has_gmch: no

<7> [200.205077] i915 display info: has_hotplug: yes

<7> [200.205080] i915 display info: has_hti: no

<7> [200.205083] i915 display info: has_ipc: yes

<7> [200.205086] i915 display info: has_overlay: no

<7> [200.205089] i915 display info: has_psr: yes

<7> [200.205092] i915 display info: has_psr_hw_tracking: yes

<7> [200.205095] i915 display info: overlay_needs_physical: no

<7> [200.205098] i915 display info: supports_tv: no

<7> [200.205101] i915 display info: has_hdcp: yes

<7> [200.205099] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [200.205104] i915 display info: has_dmc: yes

<7> [200.205107] i915 display info: has_dsc: no

<7> [200.205106] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [200.205112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [200.205282] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [200.205297] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [200.205304] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [200.205311] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [200.205362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [200.205502] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [200.205514] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [200.205520] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [200.205526] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [200.205578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [200.205713] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [200.205724] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [200.205730] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [200.205734] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [200.205738] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [200.205741] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [200.205759] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [200.205770] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [200.205791] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [200.205802] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [200.205796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [200.206411] [drm:drm_client_modeset_probe]

<7> [200.206451] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [200.206459] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [200.206652] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [200.206659] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [200.206571] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [200.206666] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [200.206785] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [200.206790] i915 device info: graphics version: 9

<7> [200.206792] i915 device info: media version: 9

<7> [200.206795] i915 device info: graphics stepping: F0

<7> [200.206798] i915 device info: media stepping: F0

<7> [200.206800] i915 device info: display stepping: C0

<7> [200.206802] i915 device info: base die stepping: **

<7> [200.206805] i915 device info: gt: 2

<7> [200.206807] i915 device info: memory-regions: 0x21

<7> [200.206810] i915 device info: page-sizes: 0x11000

<7> [200.206812] i915 device info: platform: KABYLAKE

<7> [200.206815] i915 device info: ppgtt-size: 48

<7> [200.206817] i915 device info: ppgtt-type: 2

<7> [200.206820] i915 device info: dma_mask_size: 39

<7> [200.206822] i915 device info: is_mobile: no

<7> [200.206824] i915 device info: is_lp: no

<7> [200.206827] i915 device info: require_force_probe: no

<7> [200.206829] i915 device info: is_dgfx: no

<7> [200.206832] i915 device info: has_64bit_reloc: yes

<7> [200.206834] i915 device info: has_64k_pages: no

<7> [200.206837] i915 device info: gpu_reset_clobbers_display: no

<7> [200.206839] i915 device info: has_reset_engine: yes

<7> [200.206842] i915 device info: has_3d_pipeline: yes

<7> [200.206844] i915 device info: has_flat_ccs: no

<7> [200.206847] i915 device info: has_global_mocs: no

<7> [200.206849] i915 device info: has_gmd_id: no

<7> [200.206852] i915 device info: has_gt_uc: yes

<7> [200.206856] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [200.206861] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [200.206869] i915 device info: has_heci_pxp: no

<7> [200.206872] i915 device info: has_heci_gscfi: no

<7> [200.206875] i915 device info: has_guc_deprivilege: no

<7> [200.206878] i915 device info: has_guc_tlb_invalidation: no

<7> [200.206881] i915 device info: has_l3_ccs_read: no

<7> [200.206884] i915 device info: has_l3_dpf: no

<7> [200.206887] i915 device info: has_llc: yes

<7> [200.206890] i915 device info: has_logical_ring_contexts: yes

<7> [200.206893] i915 device info: has_logical_ring_elsq: no

<7> [200.206895] i915 device info: has_media_ratio_mode: no

<7> [200.206898] i915 device info: has_mslice_steering: no

<7> [200.206901] i915 device info: has_oa_bpc_reporting: no

<7> [200.206904] i915 device info: has_oa_slice_contrib_limits: no

<7> [200.206907] i915 device info: has_oam: no

<7> [200.206910] i915 device info: has_one_eu_per_fuse_bit: no

<7> [200.206913] i915 device info: has_pxp: no

<7> [200.206916] i915 device info: has_rc6: yes

<7> [200.206919] i915 device info: has_rc6p: no

<7> [200.206921] i915 device info: has_rps: yes

<7> [200.206924] i915 device info: has_runtime_pm: yes

<7> [200.206927] i915 device info: has_snoop: no

<7> [200.206930] i915 device info: has_coherent_ggtt: yes

<7> [200.206933] i915 device info: tuning_thread_rr_after_dep: no

<7> [200.206936] i915 device info: unfenced_needs_alignment: no

<7> [200.206939] i915 device info: hws_needs_physical: no

<7> [200.206942] i915 device info: has_pooled_eu: no

<7> [200.206945] i915 device info: rawclk rate: 24000 kHz

<7> [200.206948] i915 device info: iommu: enabled

<7> [200.206951] i915 device info: available engines: 40403

<7> [200.206954] i915 device info: slice total: 1, mask=0001

<7> [200.206958] i915 device info: subslice total: 3

<7> [200.206961] i915 device info: slice0: 3 subslices, mask=00000007

<7> [200.206866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [200.206964] i915 device info: slice1: 0 subslices, mask=00000000

<7> [200.206967] i915 device info: slice2: 0 subslices, mask=00000000

<7> [200.206970] i915 device info: EU total: 24

<7> [200.206972] i915 device info: EU per subslice: 8

<7> [200.206975] i915 device info: has slice power gating: no

<7> [200.206977] i915 device info: has subslice power gating: no

<7> [200.206980] i915 device info: has EU power gating: yes

<6> [200.206982] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [200.206985] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [200.206988] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [200.206992] i915: Performing live selftests with st_random_seed=0x9e12ab8 st_timeout=500

<6> [200.207030] i915: Running intel_reset_live_selftests/igt_global_reset

<7> [200.207087] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [200.207094] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [200.207098] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [200.207103] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [200.207107] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [200.207142] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [200.207153] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [200.207172] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [200.207182] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [200.208246] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [200.208294] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [200.212900] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [200.213614] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [200.213840] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [200.213844] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [200.214478] i915: Running intel_reset_live_selftests/igt_reset_device_stolen

<6> [200.276131] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [200.276136] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [200.278525] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [200.278792] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [200.278999] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [200.279002] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [200.325173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<6> [200.343111] i915: Running intel_reset_live_selftests/igt_reset_engines_stolen

<6> [200.775175] i915: Running intel_reset_live_selftests/igt_wedged_reset

<7> [200.775187] intel_gt_set_wedged called from igt_wedged_reset+0x25/0x150 [i915]

<6> [200.776435] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [200.776439] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [200.781158] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [200.781740] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [200.781897] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [200.781899] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [200.782110] i915: Running intel_reset_live_selftests/igt_atomic_reset

<7> [200.782246] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [200.782892] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [200.782896] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [200.785132] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [200.785365] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [200.785524] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [200.785527] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [200.786151] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [200.786896] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [200.786900] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [200.789168] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [200.789399] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [200.789556] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [200.789558] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [200.790285] i915: Running intel_reset_live_selftests/igt_atomic_engine_reset

<7> [200.790310] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [200.791112] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [200.791116] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [200.793511] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [200.793747] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [200.793907] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [200.793910] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [200.795683] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [200.796573] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [200.796577] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [200.799099] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [200.799332] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [200.799485] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [200.799488] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [200.799701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [200.799905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [200.800065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [200.800210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [200.800354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [200.823928] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [200.857410] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [200.901483] i915: probe of 0000:00:02.0 failed with error -25

<6> [201.058049] [IGT] i915_selftest: finished subtest reset, SUCCESS

Results for igt@i915_selftest@live@reset