igt@i915_selftest@live@vma on fi-bsw-nick@linus-v6.7-rc6 Test details

Detail	Value
Duration	1.78 seconds
Igt-Version	IGT-Version: 1.28-g2a2b71616 (x86_64) (Linux: 6.7.0-rc6-linus-v6.7-rc6-gceb6a6f023fd+ x86_64)
Out	Starting dynamic subtest: vma Dynamic subtest vma: SUCCESS (1.776s)
Err	Starting dynamic subtest: vma Dynamic subtest vma: SUCCESS (1.776s)
Dmesg	<6> [399.659977] [IGT] i915_selftest: starting dynamic subtest vma <5> [400.001266] Setting dangerous option live_selftests - tainting kernel <7> [400.179041] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [400.180084] i915 0000:00:02.0: [drm:intel_detect_pch [i915]] No PCH found. <7> [400.181284] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [400.182930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 200000 kHz <7> [400.185820] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 2048M <7> [400.186615] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 128M <7> [400.187229] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [400.188183] i915 0000:00:02.0: vgaarb: deactivate vga console <7> [400.189539] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ee00007 <7> [400.190279] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [400.191979] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7b41d000 <7> [400.193130] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [400.194124] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [400.195081] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [400.196036] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [400.197021] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DDR speed: 1600 MHz <7> [400.201602] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz <7> [400.202320] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT CHERRYVIEW ", BDB version 195 <7> [400.204121] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [400.204942] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 153, min size 5) <7> [400.206752] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [400.210545] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [400.211307] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [400.213319] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [400.214839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [400.217595] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [400.218349] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [400.220113] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [400.220939] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [400.222577] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [400.223502] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [400.226528] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [400.227283] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [400.228048] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [400.229332] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [400.230788] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7> [400.232018] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [400.233021] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7> [400.236593] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 00 <7> [400.237722] i915 0000:00:02.0: [drm:intel_power_domains_init_hw [i915]] Initial PHY_CONTROL=0x050007ff <7> [400.239483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [400.240203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display <7> [400.243715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc <7> [400.244590] i915 0000:00:02.0: [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY0 (PHY_CONTROL=0x050007ff) <7> [400.245307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-d <7> [400.247759] i915 0000:00:02.0: [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) <7> [400.252607] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 <7> [400.281880] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [400.296541] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] CZ clock rate: 320000 kHz <7> [400.300193] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 200000 kHz, VCO 1600000 kHz, ref 0 kHz, bypass 0 kHz, voltage level 15 <7> [400.301016] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 320000 kHz <7> [400.303609] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 304000 kHz <7> [400.305599] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DP B] Using AUX CH B (VBT) <7> [400.306371] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DP B] <7> [400.310277] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:101:HDMI B] <7> [400.315933] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:101:HDMI B] Using DDC pin 0x5 (VBT) <7> [400.319006] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DP D] Using AUX CH D (VBT) <7> [400.322083] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DP D] <7> [400.323286] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:110:HDMI D] <7> [400.326484] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:110:HDMI D] Using DDC pin 0x3 (VBT) <7> [400.327528] i915 0000:00:02.0: [drm:vlv_dsi_init [i915]] <7> [400.330672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [400.331615] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [400.332373] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [400.334538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:primary A] hw state readout: disabled, pipe A <7> [400.335307] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:sprite A] hw state readout: disabled, pipe A <7> [400.338474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:41:sprite B] hw state readout: disabled, pipe A <7> [400.339240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [400.340541] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:primary B] hw state readout: disabled, pipe B <7> [400.341319] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:56:sprite C] hw state readout: disabled, pipe B <7> [400.344508] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:62:sprite D] hw state readout: disabled, pipe B <7> [400.345287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [400.346104] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:primary C] hw state readout: disabled, pipe C <7> [400.346906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:sprite E] hw state readout: disabled, pipe C <7> [400.349477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:sprite F] hw state readout: disabled, pipe C <7> [400.350234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [400.353520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DP B] hw state readout: disabled, pipe A <7> [400.354299] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:101:HDMI B] hw state readout: disabled, pipe A <7> [400.355554] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP D] hw state readout: disabled, pipe A <7> [400.358441] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:HDMI D] hw state readout: disabled, pipe A <7> [400.359344] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [400.360261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:102:HDMI-A-1] hw state readout: disabled <7> [400.361087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [400.365491] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:HDMI-A-2] hw state readout: disabled <7> [400.366224] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:primary A] min_cdclk 0 kHz <7> [400.367058] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:sprite A] min_cdclk 0 kHz <7> [400.367809] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:41:sprite B] min_cdclk 0 kHz <7> [400.370435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [400.371160] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [400.374467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:primary B] min_cdclk 0 kHz <7> [400.375199] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:56:sprite C] min_cdclk 0 kHz <7> [400.375949] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:62:sprite D] min_cdclk 0 kHz <7> [400.378432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [400.379145] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [400.380521] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:primary C] min_cdclk 0 kHz <7> [400.381269] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:sprite E] min_cdclk 0 kHz <7> [400.384467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:sprite F] min_cdclk 0 kHz <7> [400.385203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [400.385972] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [400.387553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [400.388279] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [400.390498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [400.395937] i915 0000:00:02.0: [drm:vlv_wm_get_hw_state_and_sanitize [i915]] Punit not acking DDR DVFS request, assuming DDR DVFS is disabled <7> [400.399551] i915 0000:00:02.0: [drm:vlv_wm_get_hw_state_and_sanitize [i915]] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15 <7> [400.400258] i915 0000:00:02.0: [drm:vlv_wm_get_hw_state_and_sanitize [i915]] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15 <7> [400.401063] i915 0000:00:02.0: [drm:vlv_wm_get_hw_state_and_sanitize [i915]] Initial watermarks: pipe C, plane=15, cursor=15, sprite0=15, sprite1=15 <7> [400.403482] i915 0000:00:02.0: [drm:vlv_wm_get_hw_state_and_sanitize [i915]] Initial watermarks: SR plane=127, SR cursor=0 level=1 cxsr=0 <7> [400.405651] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [400.406345] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 80000000] <7> [400.411584] i915 0000:00:02.0: [drm:intel_rps_init [i915]] GPLL reference freq: 40000 kHz <7> [400.412324] i915 0000:00:02.0: [drm:intel_rps_init [i915]] max GPU freq: 600 MHz (60) <7> [400.413932] i915 0000:00:02.0: [drm:intel_rps_init [i915]] RPe GPU freq: 320 MHz (32) <7> [400.414943] i915 0000:00:02.0: [drm:intel_rps_init [i915]] RP1(Guar) GPU freq: 320 MHz (32) <7> [400.415789] i915 0000:00:02.0: [drm:intel_rps_init [i915]] min GPU freq: 200 MHz (20) <7> [400.420874] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 context workarounds on rcs'0 <7> [400.438178] i915 0000:00:02.0: [drm:intel_rps_enable [i915]] GPLL enabled? yes <7> [400.439015] i915 0000:00:02.0: [drm:intel_rps_enable [i915]] GPU status: 0x00001410 <7> [400.479252] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [400.480211] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [400.483621] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [400.484273] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [400.487506] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [400.488244] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [400.489057] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [400.489811] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [400.491632] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [400.510184] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DP B bus for card0-DP-1 <7> [400.521193] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [400.533583] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:102:HDMI-A-1] generating connector hotplug event <7> [400.541198] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DP D bus for card0-DP-2 <7> [400.549906] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [400.556584] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:HDMI-A-2] generating connector hotplug event <6> [400.556826] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [400.585934] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <6> [400.623949] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [400.626607] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input55 <7> [400.631503] [drm:drm_client_modeset_probe] <7> [400.631641] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [400.631668] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [400.632741] i915 display info: display version: 8 <7> [400.632755] i915 display info: cursor_needs_physical: no <7> [400.632764] i915 display info: has_cdclk_crawl: no <7> [400.632771] i915 display info: has_cdclk_squash: no <7> [400.632777] i915 display info: has_ddi: no <7> [400.632784] i915 display info: has_dp_mst: no <7> [400.632791] i915 display info: has_dsb: no <7> [400.632798] i915 display info: has_fpga_dbg: no <7> [400.632804] i915 display info: has_gmch: yes <7> [400.632811] i915 display info: has_hotplug: yes <7> [400.632818] i915 display info: has_hti: no <7> [400.632825] i915 display info: has_ipc: no <7> [400.632831] i915 display info: has_overlay: no <7> [400.632838] i915 display info: has_psr: no <7> [400.632844] i915 display info: has_psr_hw_tracking: no <7> [400.632851] i915 display info: overlay_needs_physical: no <7> [400.632858] i915 display info: supports_tv: no <7> [400.632864] i915 display info: has_hdcp: no <7> [400.632871] i915 display info: has_dmc: no <7> [400.632877] i915 display info: has_dsc: no <7> [400.632891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-d <7> [400.634426] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [400.634484] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [400.634510] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:102:HDMI-A-1] <7> [400.634531] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:102:HDMI-A-1] <7> [400.635224] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:102:HDMI-A-1] status updated from unknown to disconnected <7> [400.635270] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:102:HDMI-A-1] disconnected <7> [400.635295] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [400.635317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [400.637440] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [400.637491] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [400.637537] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:HDMI-A-2] <7> [400.637560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:111:HDMI-A-2] <7> [400.638255] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:HDMI-A-2] status updated from unknown to disconnected <7> [400.638745] i915 0000:00:02.0: [drm:chv_dpio_cmn_power_well_disable [i915]] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) <7> [400.639689] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:HDMI-A-2] disconnected <7> [400.639724] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [400.639739] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [400.639751] [drm:drm_client_modeset_probe] connector 102 enabled? no <7> [400.639762] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [400.639773] [drm:drm_client_modeset_probe] connector 111 enabled? no <7> [400.639891] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [400.639926] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [400.639990] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [400.640020] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [400.642284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-bc <7> [400.646543] i915 0000:00:02.0: [drm:chv_dpio_cmn_power_well_disable [i915]] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) <7> [400.647317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display <7> [400.654518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [400.656607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [400.660031] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [400.662740] [drm:drm_client_modeset_probe] <7> [400.662870] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [400.662897] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [400.663893] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [400.663927] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:102:HDMI-A-1] <7> [400.663950] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:102:HDMI-A-1] <7> [400.664991] i915 device info: pciid=0x22b1 rev=0x21 platform=CHERRYVIEW (subplatform=0x0) gen=8 <7> [400.665006] i915 device info: graphics version: 8 <7> [400.665014] i915 device info: media version: 8 <7> [400.665021] i915 device info: graphics stepping: <7> [400.665028] i915 device info: media stepping: <7> [400.665035] i915 device info: display stepping: <7> [400.665041] i915 device info: base die stepping: <7> [400.665048] i915 device info: gt: 0 <7> [400.665055] i915 device info: memory-regions: 0x21 <7> [400.665061] i915 device info: page-sizes: 0x1000 <7> [400.665068] i915 device info: platform: CHERRYVIEW <7> [400.665075] i915 device info: ppgtt-size: 32 <7> [400.665082] i915 device info: ppgtt-type: 2 <7> [400.665089] i915 device info: dma_mask_size: 39 <7> [400.665095] i915 device info: is_mobile: no <7> [400.665102] i915 device info: is_lp: yes <7> [400.665108] i915 device info: require_force_probe: no <7> [400.665115] i915 device info: is_dgfx: no <7> [400.665121] i915 device info: has_64bit_reloc: yes <7> [400.665128] i915 device info: has_64k_pages: no <7> [400.665135] i915 device info: gpu_reset_clobbers_display: no <7> [400.665141] i915 device info: has_reset_engine: yes <7> [400.665148] i915 device info: has_3d_pipeline: no <7> [400.665154] i915 device info: has_flat_ccs: no <7> [400.665161] i915 device info: has_global_mocs: no <7> [400.665167] i915 device info: has_gmd_id: no <7> [400.665174] i915 device info: has_gt_uc: no <7> [400.665180] i915 device info: has_heci_pxp: no <7> [400.665187] i915 device info: has_heci_gscfi: no <7> [400.665194] i915 device info: has_guc_deprivilege: no <7> [400.665200] i915 device info: has_guc_tlb_invalidation: no <7> [400.665207] i915 device info: has_l3_ccs_read: no <7> [400.665213] i915 device info: has_l3_dpf: no <7> [400.665220] i915 device info: has_llc: no <7> [400.665226] i915 device info: has_logical_ring_contexts: yes <7> [400.665233] i915 device info: has_logical_ring_elsq: no <7> [400.665240] i915 device info: has_media_ratio_mode: no <7> [400.665246] i915 device info: has_mslice_steering: no <7> [400.665253] i915 device info: has_oa_bpc_reporting: no <7> [400.665260] i915 device info: has_oa_slice_contrib_limits: no <7> [400.665266] i915 device info: has_oam: no <7> [400.665273] i915 device info: has_one_eu_per_fuse_bit: no <7> [400.665279] i915 device info: has_pxp: no <7> [400.665286] i915 device info: has_rc6: yes <7> [400.665292] i915 device info: has_rc6p: no <7> [400.665299] i915 device info: has_rps: yes <7> [400.665305] i915 device info: has_runtime_pm: yes <7> [400.665312] i915 device info: has_snoop: yes <7> [400.665319] i915 device info: has_coherent_ggtt: no <7> [400.665325] i915 device info: tuning_thread_rr_after_dep: no <7> [400.665332] i915 device info: unfenced_needs_alignment: no <7> [400.665338] i915 device info: hws_needs_physical: no <7> [400.665345] i915 device info: has_pooled_eu: no <7> [400.665352] i915 device info: rawclk rate: 200000 kHz <7> [400.665359] i915 device info: iommu: disabled <7> [400.665366] i915 device info: available engines: 40403 <7> [400.665374] i915 device info: slice total: 1, mask=0001 <7> [400.665849] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:102:HDMI-A-1] disconnected <7> [400.665880] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [400.665902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [400.668434] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [400.668469] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:HDMI-A-2] <7> [400.668491] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:111:HDMI-A-2] <7> [400.669178] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:HDMI-A-2] disconnected <7> [400.669203] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [400.669218] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [400.669232] [drm:drm_client_modeset_probe] connector 102 enabled? no <7> [400.669243] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [400.669254] [drm:drm_client_modeset_probe] connector 111 enabled? no <7> [400.669364] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [400.669698] i915 device info: subslice total: 2 <7> [400.669708] i915 device info: slice0: 2 subslices, mask=00000003 <7> [400.669717] i915 device info: EU total: 12 <7> [400.669725] i915 device info: EU per subslice: 6 <7> [400.669732] i915 device info: has slice power gating: no <7> [400.669738] i915 device info: has subslice power gating: yes <7> [400.669745] i915 device info: has EU power gating: yes <6> [400.669754] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [400.669762] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [400.669769] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [400.669781] i915: Performing live selftests with st_random_seed=0x3144c00c st_timeout=500 <6> [400.669790] i915: Running vma <6> [400.669862] i915: Running i915_vma_live_selftests/igt_vma_remapped_gtt <7> [400.671100] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [400.671172] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [400.671205] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [400.671474] [drm:drm_client_modeset_probe] <7> [400.671575] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [400.671597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [400.672298] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [400.672330] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:102:HDMI-A-1] <7> [400.672354] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:102:HDMI-A-1] <7> [400.676060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [400.676980] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:102:HDMI-A-1] disconnected <7> [400.677016] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [400.677038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [400.678036] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [400.678069] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:HDMI-A-2] <7> [400.678090] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:111:HDMI-A-2] <7> [400.679666] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:HDMI-A-2] disconnected <7> [400.679695] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [400.679710] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [400.679723] [drm:drm_client_modeset_probe] connector 102 enabled? no <7> [400.679734] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [400.679745] [drm:drm_client_modeset_probe] connector 111 enabled? no <7> [400.679845] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [400.679879] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [400.679935] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [400.679965] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [400.727685] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [400.729480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display <7> [400.735501] i915 0000:00:02.0: [drm:intel_vga_redisable_power_on [i915]] Something enabled VGA plane, disabling it <7> [400.736793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc <7> [400.738697] i915 0000:00:02.0: [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) <7> [400.740486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-d <7> [400.742529] i915 0000:00:02.0: [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) <7> [400.743957] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [400.744832] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:102:HDMI-A-1] <7> [400.750325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [400.760704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:111:HDMI-A-2] <7> [400.790658] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [400.894349] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [400.960343] i915: probe of 0000:00:02.0 failed with error -25 <6> [401.438939] [IGT] i915_selftest: finished subtest vma, SUCCESS

<6> [399.659977] [IGT] i915_selftest: starting dynamic subtest vma

<5> [400.001266] Setting dangerous option live_selftests - tainting kernel

<7> [400.179041] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [400.180084] i915 0000:00:02.0: [drm:intel_detect_pch [i915]] No PCH found.

<7> [400.181284] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [400.182930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 200000 kHz

<7> [400.185820] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 2048M

<7> [400.186615] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 128M

<7> [400.187229] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [400.188183] i915 0000:00:02.0: vgaarb: deactivate vga console

<7> [400.189539] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ee00007

<7> [400.190279] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [400.191979] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7b41d000

<7> [400.193130] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [400.194124] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [400.195081] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [400.196036] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [400.197021] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DDR speed: 1600 MHz

<7> [400.201602] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz

<7> [400.202320] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT CHERRYVIEW ", BDB version 195

<7> [400.204121] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [400.204942] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 153, min size 5)

<7> [400.206752] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [400.210545] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [400.211307] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [400.213319] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [400.214839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [400.217595] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [400.218349] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [400.220113] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [400.220939] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [400.222577] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [400.223502] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [400.226528] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [400.227283] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [400.228048] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [400.229332] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [400.230788] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0

<7> [400.232018] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [400.233021] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0

<7> [400.236593] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 00

<7> [400.237722] i915 0000:00:02.0: [drm:intel_power_domains_init_hw [i915]] Initial PHY_CONTROL=0x050007ff

<7> [400.239483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [400.240203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display

<7> [400.243715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc

<7> [400.244590] i915 0000:00:02.0: [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY0 (PHY_CONTROL=0x050007ff)

<7> [400.245307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-d

<7> [400.247759] i915 0000:00:02.0: [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff)

<7> [400.252607] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0

<7> [400.281880] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [400.296541] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] CZ clock rate: 320000 kHz

<7> [400.300193] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 200000 kHz, VCO 1600000 kHz, ref 0 kHz, bypass 0 kHz, voltage level 15

<7> [400.301016] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 320000 kHz

<7> [400.303609] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 304000 kHz

<7> [400.305599] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DP B] Using AUX CH B (VBT)

<7> [400.306371] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DP B]

<7> [400.310277] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:101:HDMI B]

<7> [400.315933] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:101:HDMI B] Using DDC pin 0x5 (VBT)

<7> [400.319006] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DP D] Using AUX CH D (VBT)

<7> [400.322083] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DP D]

<7> [400.323286] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:110:HDMI D]

<7> [400.326484] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:110:HDMI D] Using DDC pin 0x3 (VBT)

<7> [400.327528] i915 0000:00:02.0: [drm:vlv_dsi_init [i915]]

<7> [400.330672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [400.331615] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [400.332373] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [400.334538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:primary A] hw state readout: disabled, pipe A

<7> [400.335307] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:sprite A] hw state readout: disabled, pipe A

<7> [400.338474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:41:sprite B] hw state readout: disabled, pipe A

<7> [400.339240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [400.340541] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:primary B] hw state readout: disabled, pipe B

<7> [400.341319] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:56:sprite C] hw state readout: disabled, pipe B

<7> [400.344508] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:62:sprite D] hw state readout: disabled, pipe B

<7> [400.345287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [400.346104] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:primary C] hw state readout: disabled, pipe C

<7> [400.346906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:sprite E] hw state readout: disabled, pipe C

<7> [400.349477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:sprite F] hw state readout: disabled, pipe C

<7> [400.350234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [400.353520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DP B] hw state readout: disabled, pipe A

<7> [400.354299] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:101:HDMI B] hw state readout: disabled, pipe A

<7> [400.355554] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP D] hw state readout: disabled, pipe A

<7> [400.358441] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:HDMI D] hw state readout: disabled, pipe A

<7> [400.359344] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [400.360261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:102:HDMI-A-1] hw state readout: disabled

<7> [400.361087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [400.365491] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:HDMI-A-2] hw state readout: disabled

<7> [400.366224] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:primary A] min_cdclk 0 kHz

<7> [400.367058] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:sprite A] min_cdclk 0 kHz

<7> [400.367809] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:41:sprite B] min_cdclk 0 kHz

<7> [400.370435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [400.371160] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [400.374467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:primary B] min_cdclk 0 kHz

<7> [400.375199] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:56:sprite C] min_cdclk 0 kHz

<7> [400.375949] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:62:sprite D] min_cdclk 0 kHz

<7> [400.378432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [400.379145] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [400.380521] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:primary C] min_cdclk 0 kHz

<7> [400.381269] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:sprite E] min_cdclk 0 kHz

<7> [400.384467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:sprite F] min_cdclk 0 kHz

<7> [400.385203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [400.385972] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [400.387553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [400.388279] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [400.390498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [400.395937] i915 0000:00:02.0: [drm:vlv_wm_get_hw_state_and_sanitize [i915]] Punit not acking DDR DVFS request, assuming DDR DVFS is disabled

<7> [400.399551] i915 0000:00:02.0: [drm:vlv_wm_get_hw_state_and_sanitize [i915]] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15

<7> [400.400258] i915 0000:00:02.0: [drm:vlv_wm_get_hw_state_and_sanitize [i915]] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15

<7> [400.401063] i915 0000:00:02.0: [drm:vlv_wm_get_hw_state_and_sanitize [i915]] Initial watermarks: pipe C, plane=15, cursor=15, sprite0=15, sprite1=15

<7> [400.403482] i915 0000:00:02.0: [drm:vlv_wm_get_hw_state_and_sanitize [i915]] Initial watermarks: SR plane=127, SR cursor=0 level=1 cxsr=0

<7> [400.405651] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [400.406345] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 80000000]

<7> [400.411584] i915 0000:00:02.0: [drm:intel_rps_init [i915]] GPLL reference freq: 40000 kHz

<7> [400.412324] i915 0000:00:02.0: [drm:intel_rps_init [i915]] max GPU freq: 600 MHz (60)

<7> [400.413932] i915 0000:00:02.0: [drm:intel_rps_init [i915]] RPe GPU freq: 320 MHz (32)

<7> [400.414943] i915 0000:00:02.0: [drm:intel_rps_init [i915]] RP1(Guar) GPU freq: 320 MHz (32)

<7> [400.415789] i915 0000:00:02.0: [drm:intel_rps_init [i915]] min GPU freq: 200 MHz (20)

<7> [400.420874] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 context workarounds on rcs'0

<7> [400.438178] i915 0000:00:02.0: [drm:intel_rps_enable [i915]] GPLL enabled? yes

<7> [400.439015] i915 0000:00:02.0: [drm:intel_rps_enable [i915]] GPU status: 0x00001410

<7> [400.479252] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [400.480211] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [400.483621] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [400.484273] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [400.487506] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [400.488244] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [400.489057] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [400.489811] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [400.491632] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [400.510184] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DP B bus for card0-DP-1

<7> [400.521193] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [400.533583] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:102:HDMI-A-1] generating connector hotplug event

<7> [400.541198] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DP D bus for card0-DP-2

<7> [400.549906] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [400.556584] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:HDMI-A-2] generating connector hotplug event

<6> [400.556826] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [400.585934] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<6> [400.623949] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [400.626607] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input55

<7> [400.631503] [drm:drm_client_modeset_probe]

<7> [400.631641] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [400.631668] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [400.632741] i915 display info: display version: 8

<7> [400.632755] i915 display info: cursor_needs_physical: no

<7> [400.632764] i915 display info: has_cdclk_crawl: no

<7> [400.632771] i915 display info: has_cdclk_squash: no

<7> [400.632777] i915 display info: has_ddi: no

<7> [400.632784] i915 display info: has_dp_mst: no

<7> [400.632791] i915 display info: has_dsb: no

<7> [400.632798] i915 display info: has_fpga_dbg: no

<7> [400.632804] i915 display info: has_gmch: yes

<7> [400.632811] i915 display info: has_hotplug: yes

<7> [400.632818] i915 display info: has_hti: no

<7> [400.632825] i915 display info: has_ipc: no

<7> [400.632831] i915 display info: has_overlay: no

<7> [400.632838] i915 display info: has_psr: no

<7> [400.632844] i915 display info: has_psr_hw_tracking: no

<7> [400.632851] i915 display info: overlay_needs_physical: no

<7> [400.632858] i915 display info: supports_tv: no

<7> [400.632864] i915 display info: has_hdcp: no

<7> [400.632871] i915 display info: has_dmc: no

<7> [400.632877] i915 display info: has_dsc: no

<7> [400.632891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-d

<7> [400.634426] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [400.634484] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [400.634510] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:102:HDMI-A-1]

<7> [400.634531] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:102:HDMI-A-1]

<7> [400.635224] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:102:HDMI-A-1] status updated from unknown to disconnected

<7> [400.635270] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:102:HDMI-A-1] disconnected

<7> [400.635295] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [400.635317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [400.637440] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [400.637491] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [400.637537] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:HDMI-A-2]

<7> [400.637560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:111:HDMI-A-2]

<7> [400.638255] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:HDMI-A-2] status updated from unknown to disconnected

<7> [400.638745] i915 0000:00:02.0: [drm:chv_dpio_cmn_power_well_disable [i915]] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd)

<7> [400.639689] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:HDMI-A-2] disconnected

<7> [400.639724] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [400.639739] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [400.639751] [drm:drm_client_modeset_probe] connector 102 enabled? no

<7> [400.639762] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [400.639773] [drm:drm_client_modeset_probe] connector 111 enabled? no

<7> [400.639891] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [400.639926] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [400.639990] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [400.640020] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [400.642284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-bc

<7> [400.646543] i915 0000:00:02.0: [drm:chv_dpio_cmn_power_well_disable [i915]] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc)

<7> [400.647317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display

<7> [400.654518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [400.656607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [400.660031] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [400.662740] [drm:drm_client_modeset_probe]

<7> [400.662870] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [400.662897] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [400.663893] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [400.663927] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:102:HDMI-A-1]

<7> [400.663950] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:102:HDMI-A-1]

<7> [400.664991] i915 device info: pciid=0x22b1 rev=0x21 platform=CHERRYVIEW (subplatform=0x0) gen=8

<7> [400.665006] i915 device info: graphics version: 8

<7> [400.665014] i915 device info: media version: 8

<7> [400.665021] i915 device info: graphics stepping: **

<7> [400.665028] i915 device info: media stepping: **

<7> [400.665035] i915 device info: display stepping: **

<7> [400.665041] i915 device info: base die stepping: **

<7> [400.665048] i915 device info: gt: 0

<7> [400.665055] i915 device info: memory-regions: 0x21

<7> [400.665061] i915 device info: page-sizes: 0x1000

<7> [400.665068] i915 device info: platform: CHERRYVIEW

<7> [400.665075] i915 device info: ppgtt-size: 32

<7> [400.665082] i915 device info: ppgtt-type: 2

<7> [400.665089] i915 device info: dma_mask_size: 39

<7> [400.665095] i915 device info: is_mobile: no

<7> [400.665102] i915 device info: is_lp: yes

<7> [400.665108] i915 device info: require_force_probe: no

<7> [400.665115] i915 device info: is_dgfx: no

<7> [400.665121] i915 device info: has_64bit_reloc: yes

<7> [400.665128] i915 device info: has_64k_pages: no

<7> [400.665135] i915 device info: gpu_reset_clobbers_display: no

<7> [400.665141] i915 device info: has_reset_engine: yes

<7> [400.665148] i915 device info: has_3d_pipeline: no

<7> [400.665154] i915 device info: has_flat_ccs: no

<7> [400.665161] i915 device info: has_global_mocs: no

<7> [400.665167] i915 device info: has_gmd_id: no

<7> [400.665174] i915 device info: has_gt_uc: no

<7> [400.665180] i915 device info: has_heci_pxp: no

<7> [400.665187] i915 device info: has_heci_gscfi: no

<7> [400.665194] i915 device info: has_guc_deprivilege: no

<7> [400.665200] i915 device info: has_guc_tlb_invalidation: no

<7> [400.665207] i915 device info: has_l3_ccs_read: no

<7> [400.665213] i915 device info: has_l3_dpf: no

<7> [400.665220] i915 device info: has_llc: no

<7> [400.665226] i915 device info: has_logical_ring_contexts: yes

<7> [400.665233] i915 device info: has_logical_ring_elsq: no

<7> [400.665240] i915 device info: has_media_ratio_mode: no

<7> [400.665246] i915 device info: has_mslice_steering: no

<7> [400.665253] i915 device info: has_oa_bpc_reporting: no

<7> [400.665260] i915 device info: has_oa_slice_contrib_limits: no

<7> [400.665266] i915 device info: has_oam: no

<7> [400.665273] i915 device info: has_one_eu_per_fuse_bit: no

<7> [400.665279] i915 device info: has_pxp: no

<7> [400.665286] i915 device info: has_rc6: yes

<7> [400.665292] i915 device info: has_rc6p: no

<7> [400.665299] i915 device info: has_rps: yes

<7> [400.665305] i915 device info: has_runtime_pm: yes

<7> [400.665312] i915 device info: has_snoop: yes

<7> [400.665319] i915 device info: has_coherent_ggtt: no

<7> [400.665325] i915 device info: tuning_thread_rr_after_dep: no

<7> [400.665332] i915 device info: unfenced_needs_alignment: no

<7> [400.665338] i915 device info: hws_needs_physical: no

<7> [400.665345] i915 device info: has_pooled_eu: no

<7> [400.665352] i915 device info: rawclk rate: 200000 kHz

<7> [400.665359] i915 device info: iommu: disabled

<7> [400.665366] i915 device info: available engines: 40403

<7> [400.665374] i915 device info: slice total: 1, mask=0001

<7> [400.665849] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:102:HDMI-A-1] disconnected

<7> [400.665880] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [400.665902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [400.668434] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [400.668469] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:HDMI-A-2]

<7> [400.668491] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:111:HDMI-A-2]

<7> [400.669178] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:HDMI-A-2] disconnected

<7> [400.669203] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [400.669218] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [400.669232] [drm:drm_client_modeset_probe] connector 102 enabled? no

<7> [400.669243] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [400.669254] [drm:drm_client_modeset_probe] connector 111 enabled? no

<7> [400.669364] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [400.669698] i915 device info: subslice total: 2

<7> [400.669708] i915 device info: slice0: 2 subslices, mask=00000003

<7> [400.669717] i915 device info: EU total: 12

<7> [400.669725] i915 device info: EU per subslice: 6

<7> [400.669732] i915 device info: has slice power gating: no

<7> [400.669738] i915 device info: has subslice power gating: yes

<7> [400.669745] i915 device info: has EU power gating: yes

<6> [400.669754] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [400.669762] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [400.669769] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [400.669781] i915: Performing live selftests with st_random_seed=0x3144c00c st_timeout=500

<6> [400.669862] i915: Running i915_vma_live_selftests/igt_vma_remapped_gtt

<7> [400.671100] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [400.671172] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [400.671205] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [400.671474] [drm:drm_client_modeset_probe]

<7> [400.671575] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [400.671597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [400.672298] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [400.672330] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:102:HDMI-A-1]

<7> [400.672354] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:102:HDMI-A-1]

<7> [400.676060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [400.676980] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:102:HDMI-A-1] disconnected

<7> [400.677016] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [400.677038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [400.678036] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [400.678069] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:HDMI-A-2]

<7> [400.678090] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:111:HDMI-A-2]

<7> [400.679666] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:HDMI-A-2] disconnected

<7> [400.679695] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [400.679710] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [400.679723] [drm:drm_client_modeset_probe] connector 102 enabled? no

<7> [400.679734] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [400.679745] [drm:drm_client_modeset_probe] connector 111 enabled? no

<7> [400.679845] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [400.679879] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [400.679935] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [400.679965] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [400.727685] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [400.729480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display

<7> [400.735501] i915 0000:00:02.0: [drm:intel_vga_redisable_power_on [i915]] Something enabled VGA plane, disabling it

<7> [400.736793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc

<7> [400.738697] i915 0000:00:02.0: [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd)

<7> [400.740486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-d

<7> [400.742529] i915 0000:00:02.0: [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff)

<7> [400.743957] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [400.744832] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:102:HDMI-A-1]

<7> [400.750325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [400.760704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:111:HDMI-A-2]

<7> [400.790658] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [400.894349] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [400.960343] i915: probe of 0000:00:02.0 failed with error -25

<6> [401.438939] [IGT] i915_selftest: finished subtest vma, SUCCESS

Results for igt@i915_selftest@live@vma