igt@i915_selftest@live@hangcheck on fi-cfl-guc@linus-v6.7-rc5 Test details

Detail	Value
Duration	24.11 seconds
Igt-Version	IGT-Version: 1.28-g0e1019715 (x86_64) (Linux: 6.7.0-rc5-linus-v6.7-rc5-ga39b6ac3781d+ x86_64)
Out	Starting dynamic subtest: hangcheck Dynamic subtest hangcheck: SUCCESS (24.114s)
Err	Starting dynamic subtest: hangcheck Dynamic subtest hangcheck: SUCCESS (24.114s)
Dmesg	<6> [269.970658] [IGT] i915_selftest: starting dynamic subtest hangcheck <5> [270.059252] Setting dangerous option enable_guc - tainting kernel <5> [270.059258] Setting dangerous option live_selftests - tainting kernel <7> [270.089283] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [270.089489] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [270.089637] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [270.089647] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP) <7> [270.089781] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [270.089963] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [270.090083] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [270.090741] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [270.090904] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [270.091061] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [270.091220] i915 0000:00:02.0: vgaarb: deactivate vga console <7> [270.091464] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047 <7> [270.091654] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [270.092038] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8c90a018 <7> [270.092261] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [270.092468] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [270.092655] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [270.092840] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [270.097124] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [270.097271] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [270.097434] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [270.097667] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [270.097855] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [270.098026] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [270.098200] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [270.098780] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [270.098930] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [270.099078] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [270.099223] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [270.099402] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [270.099556] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [270.099677] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [270.100263] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [270.100516] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209 <7> [270.100758] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [270.100980] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [270.101208] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [270.101426] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [270.101674] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [270.101876] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [270.102083] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [270.102288] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [270.102502] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [270.102777] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [270.102976] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [270.103179] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [270.103386] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [270.103589] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [270.103791] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [270.103994] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [270.104197] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [270.104407] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [270.104641] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [270.104840] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [270.105038] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [270.105237] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9 <7> [270.105443] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [270.105643] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 10 <7> [270.105841] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [270.106039] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 10 <7> [270.106238] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [270.106482] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [270.106726] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [270.106936] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [270.107176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [270.107403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [270.107609] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [270.107813] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [270.108013] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [270.108214] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [270.108487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [270.108702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [270.108901] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [270.109116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [270.109360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [270.109639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [270.109839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [270.110039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [270.110273] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [270.111384] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [270.111853] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [270.112220] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [270.112419] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [270.112579] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [270.112719] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [270.112858] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [270.113030] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [270.113168] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [270.113306] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [270.113539] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [270.113695] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [270.114732] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [270.115520] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [270.115710] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [270.115856] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [270.118413] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [270.118584] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [270.118725] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [270.118862] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [270.119005] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [270.119142] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [270.119280] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [270.119485] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [270.119656] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [270.119807] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [270.119945] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [270.120115] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [270.120301] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [270.120484] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [270.120672] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [270.120795] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [270.120920] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [270.121086] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [270.121331] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [270.121534] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [270.121744] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [270.121874] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [270.122033] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [270.122163] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [270.342346] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.353344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.364344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.375344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.386346] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.397344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.408344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.419344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.430345] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.441344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.452344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.463346] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.474346] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.485343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.496343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.507343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.518344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.529343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.540343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.551344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.562344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.573343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.584343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.595344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.606344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.617343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.628343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.639343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.650344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.661342] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.672343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.683344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.683521] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [270.683533] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [270.683592] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [270.683758] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [270.683941] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [270.684071] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [270.684408] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [270.684541] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [270.684733] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI D/PHY D] Using AUX CH D (VBT) <7> [270.684876] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI D/PHY D] <7> [270.685193] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [270.685327] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D/PHY D] <7> [270.685530] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:108:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [270.685776] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:119:DDI E/PHY E] Using AUX CH A (VBT) <7> [270.685913] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:119:DDI E/PHY E] <7> [270.686085] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [270.686410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [270.686619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [270.686766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [270.686902] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [270.687035] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [270.687168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [270.687301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [270.687499] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [270.687693] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [270.687881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [270.688017] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [270.688153] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [270.688289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [270.688543] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [270.688725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D/PHY D] hw state readout: disabled, pipe A <7> [270.688887] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST A] hw state readout: disabled, pipe A <7> [270.689068] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST B] hw state readout: disabled, pipe B <7> [270.689196] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST C] hw state readout: disabled, pipe C <7> [270.689328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DDI E/PHY E] hw state readout: disabled, pipe A <7> [270.689530] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [270.689729] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [270.689867] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [270.690004] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [270.690168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [270.690379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [270.690541] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [270.690679] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:HDMI-A-3] hw state readout: disabled <7> [270.690815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:120:DP-2] hw state readout: disabled <7> [270.690943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [270.691072] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [270.691199] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [270.691327] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [270.691526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [270.691740] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [270.691872] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [270.692003] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [270.692143] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [270.692293] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [270.692544] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [270.692755] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [270.692995] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [270.693131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [270.693266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [270.693466] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [270.693666] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [270.693796] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [270.693923] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [270.696283] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [270.696508] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [270.696654] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [270.696765] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [270.696891] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [270.697835] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [270.697980] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [270.698103] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0 <7> [270.702481] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [270.702640] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [270.702837] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [270.724313] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [270.724506] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [270.724666] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [270.724792] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [270.724916] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [270.725041] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x3e920000 <7> [270.725165] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [270.725290] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [270.725423] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [270.725650] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [270.725781] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [270.725912] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [270.726110] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [270.726308] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [270.726494] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [270.727685] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.727688] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.732474] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.733134] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.733282] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.733284] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [270.741135] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [270.741242] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [270.741387] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [270.741570] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [270.741876] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [270.742210] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [270.742381] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [270.742580] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [270.742705] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [270.742846] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [270.746393] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [270.746668] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [270.746926] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 <7> [270.747491] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <7> [270.747752] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:HDMI-A-3] generating connector hotplug event <7> [270.747995] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 <7> [270.748549] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:120:DP-2] generating connector hotplug event <6> [270.748586] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [270.749925] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [270.761954] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [270.763671] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input86 <7> [270.764153] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [270.764634] i915 display info: display version: 9 <7> [270.764637] i915 display info: cursor_needs_physical: no <7> [270.764638] i915 display info: has_cdclk_crawl: no <7> [270.764640] i915 display info: has_cdclk_squash: no <7> [270.764641] i915 display info: has_ddi: yes <7> [270.764642] i915 display info: has_dp_mst: yes <7> [270.764644] i915 display info: has_dsb: no <7> [270.764645] i915 display info: has_fpga_dbg: yes <7> [270.764646] i915 display info: has_gmch: no <7> [270.764648] i915 display info: has_hotplug: yes <7> [270.764649] i915 display info: has_hti: no <7> [270.764650] i915 display info: has_ipc: yes <7> [270.764651] i915 display info: has_overlay: no <7> [270.764653] i915 display info: has_psr: yes <7> [270.764654] i915 display info: has_psr_hw_tracking: yes <7> [270.764655] i915 display info: overlay_needs_physical: no <7> [270.764656] i915 display info: supports_tv: no <7> [270.764658] i915 display info: has_hdcp: yes <7> [270.764659] i915 display info: has_dmc: yes <7> [270.764660] i915 display info: has_dsc: no <7> [270.764666] [drm:drm_client_modeset_probe] <7> [270.764699] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [270.764663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [270.764705] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [270.764855] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [270.764865] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [270.764870] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [270.764826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [270.764873] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [270.765010] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [270.765017] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [270.765020] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [270.764971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [270.765024] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [270.765162] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [270.765169] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [270.765172] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] <7> [270.765112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [270.765175] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [270.765312] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] status updated from unknown to disconnected <7> [270.765318] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected <7> [270.765321] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] <7> [270.765325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [270.765561] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] status updated from unknown to disconnected <7> [270.765573] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected <7> [270.765578] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [270.765583] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [270.765587] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [270.765604] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [270.765606] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [270.765609] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [270.765642] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [270.765653] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [270.765668] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [270.765692] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [270.765653] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [270.765813] i915 device info: pciid=0x3e92 rev=0x00 platform=COFFEELAKE (subplatform=0x0) gen=9 <7> [270.765817] i915 device info: graphics version: 9 <7> [270.765818] i915 device info: media version: 9 <7> [270.765820] i915 device info: graphics stepping: <7> [270.765821] i915 device info: media stepping: <7> [270.765823] i915 device info: display stepping: <7> [270.765824] i915 device info: base die stepping: <7> [270.765826] i915 device info: gt: 2 <7> [270.765827] i915 device info: memory-regions: 0x21 <7> [270.765829] i915 device info: page-sizes: 0x11000 <7> [270.765830] i915 device info: platform: COFFEELAKE <7> [270.765832] i915 device info: ppgtt-size: 48 <7> [270.765833] i915 device info: ppgtt-type: 2 <7> [270.765835] i915 device info: dma_mask_size: 39 <7> [270.765836] i915 device info: is_mobile: no <7> [270.765838] i915 device info: is_lp: no <7> [270.765840] i915 device info: require_force_probe: no <7> [270.765841] i915 device info: is_dgfx: no <7> [270.765842] i915 device info: has_64bit_reloc: yes <7> [270.765844] i915 device info: has_64k_pages: no <7> [270.765845] i915 device info: gpu_reset_clobbers_display: no <7> [270.765847] i915 device info: has_reset_engine: yes <7> [270.765848] i915 device info: has_3d_pipeline: yes <7> [270.765850] i915 device info: has_flat_ccs: no <7> [270.765851] i915 device info: has_global_mocs: no <7> [270.765853] i915 device info: has_gmd_id: no <7> [270.765854] i915 device info: has_gt_uc: yes <7> [270.765856] i915 device info: has_heci_pxp: no <7> [270.765857] i915 device info: has_heci_gscfi: no <7> [270.765858] i915 device info: has_guc_deprivilege: no <7> [270.765860] i915 device info: has_guc_tlb_invalidation: no <7> [270.765861] i915 device info: has_l3_ccs_read: no <7> [270.765863] i915 device info: has_l3_dpf: no <7> [270.765864] i915 device info: has_llc: yes <7> [270.765866] i915 device info: has_logical_ring_contexts: yes <7> [270.765867] i915 device info: has_logical_ring_elsq: no <7> [270.765869] i915 device info: has_media_ratio_mode: no <7> [270.765870] i915 device info: has_mslice_steering: no <7> [270.765872] i915 device info: has_oa_bpc_reporting: no <7> [270.765873] i915 device info: has_oa_slice_contrib_limits: no <7> [270.765875] i915 device info: has_oam: no <7> [270.765876] i915 device info: has_one_eu_per_fuse_bit: no <7> [270.765878] i915 device info: has_pxp: no <7> [270.765879] i915 device info: has_rc6: yes <7> [270.765880] i915 device info: has_rc6p: no <7> [270.765882] i915 device info: has_rps: yes <7> [270.765883] i915 device info: has_runtime_pm: yes <7> [270.765885] i915 device info: has_snoop: no <7> [270.765886] i915 device info: has_coherent_ggtt: yes <7> [270.765888] i915 device info: tuning_thread_rr_after_dep: no <7> [270.765889] i915 device info: unfenced_needs_alignment: no <7> [270.765891] i915 device info: hws_needs_physical: no <7> [270.765892] i915 device info: has_pooled_eu: no <7> [270.765893] i915 device info: rawclk rate: 24000 kHz <7> [270.765895] i915 device info: iommu: disabled <7> [270.765897] i915 device info: available engines: 40403 <7> [270.765899] i915 device info: slice total: 1, mask=0001 <7> [270.765901] i915 device info: subslice total: 3 <7> [270.765902] i915 device info: slice0: 3 subslices, mask=00000007 <7> [270.765904] i915 device info: slice1: 0 subslices, mask=00000000 <7> [270.765906] i915 device info: slice2: 0 subslices, mask=00000000 <7> [270.765908] i915 device info: EU total: 24 <7> [270.765909] i915 device info: EU per subslice: 8 <7> [270.765910] i915 device info: has slice power gating: no <7> [270.765912] i915 device info: has subslice power gating: no <7> [270.765913] i915 device info: has EU power gating: yes <6> [270.765915] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [270.765917] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [270.765919] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [270.765921] i915: Performing live selftests with st_random_seed=0x8c4b6133 st_timeout=500 <6> [270.765923] i915: Running hangcheck <6> [270.765941] i915: Running intel_hangcheck_live_selftests/igt_hang_sanitycheck <7> [270.766184] [drm:drm_client_modeset_probe] <7> [270.766209] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [270.766214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [270.766368] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [270.766372] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [270.766376] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [270.766534] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [270.766540] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [270.766546] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [270.766724] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [270.766728] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] <7> [270.766732] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [270.766954] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected <7> [270.766958] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] <7> [270.766962] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [270.767110] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected <7> [270.767115] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [270.767120] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [270.767124] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [270.767127] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [270.767131] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [270.767135] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [270.767148] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [270.767157] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [270.767174] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [270.767181] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [270.801584] i915: Running intel_hangcheck_live_selftests/igt_reset_nop <6> [270.804926] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.804964] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.807082] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.807622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.807783] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.807785] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.812106] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.812110] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.814418] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.814667] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.814837] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.814839] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.817751] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.817755] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.820070] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.820315] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.820498] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.820500] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.823358] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.823362] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.825394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.825636] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.825804] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.825807] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.828668] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.828672] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.830936] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.831177] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.831361] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.831363] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.834629] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.834633] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.836914] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.837156] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.837325] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.837328] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.840368] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.840372] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.842389] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.842633] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.842804] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.842806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.845738] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.845742] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.848012] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.848254] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.848436] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.848439] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.851416] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.851420] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.853433] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.853676] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.853845] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.853848] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.856681] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.856686] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.859011] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.859252] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.859463] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.859466] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.862261] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.862265] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.864357] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.864606] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.864774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.864777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.867656] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.867660] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.871417] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.872178] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.872356] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.872358] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.875258] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.875262] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.877358] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.877596] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.877764] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.877766] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.880455] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.880459] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.882365] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.882606] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.882774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.882776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.885516] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.885520] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.887826] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.888067] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.888235] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.888237] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [270.890396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <6> [270.891088] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.891092] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.893408] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.893648] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.893817] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.893819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.896765] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.896769] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.899028] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.899270] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.899500] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.899502] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.902311] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.902315] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.904413] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.904656] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.904826] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.904828] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.907573] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.907577] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.909853] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.910094] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.910263] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.910265] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.913156] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.913160] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.915402] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.915650] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.915818] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.915821] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.918480] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.918484] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.920399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.920622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.920779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.920781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.923474] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.923478] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.925405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.925630] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.925787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.925789] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.928384] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.928388] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.930405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.930632] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.930789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.930791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.933455] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.933459] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.935405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.935632] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.935789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.935791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.938437] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.938441] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.940405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.940630] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.940787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.940789] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.943409] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.943413] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.945412] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.945636] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.945793] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.945795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.948407] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.948411] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.950428] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.950655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.950814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.950816] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.953401] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.953405] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.955448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.955677] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.955836] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.955838] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.958450] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.958454] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.960418] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.960643] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.960800] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.960802] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.963378] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.963382] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.965399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.965624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.965782] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.965784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.968417] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.968421] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.970427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.970654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.970812] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.970814] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.973421] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.973425] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.975405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.975629] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.975785] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.975787] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.978452] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.978455] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.980408] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.980631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.980788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.980790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.983433] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.983437] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.985401] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.985626] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.985784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.985786] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.988332] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.988374] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.990401] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.990625] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.990782] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.990784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.993436] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.993439] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.995397] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.995622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.995779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.995781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.998432] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.998436] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.000401] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.000626] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.000783] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.000785] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.003378] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.003381] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.005399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.005623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.005779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.005781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.008566] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.008569] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.010815] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.011040] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.011197] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.011199] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.013900] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.013903] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.016026] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.016252] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.016502] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.016505] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.019133] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.019136] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.021370] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.021586] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.021735] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.021737] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.025146] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.025150] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.027442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.027655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.027802] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.027804] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.030578] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.030582] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.032813] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.033032] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.033181] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.033183] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.036378] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.036382] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.038408] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.038637] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.038786] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.038788] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.041713] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.041716] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.044056] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.044282] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.044448] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.044451] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.047324] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.047328] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.049345] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.049558] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.049705] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.049708] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.052662] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.052666] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.054961] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.055189] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.055375] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.055377] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.058074] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.058078] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.060396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.060612] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.060760] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.060762] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.063442] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.063445] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.065416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.065641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.065799] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.065801] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.068452] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.068456] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.070435] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.070662] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.070820] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.070822] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.073462] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.073466] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.075404] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.075628] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.075785] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.075788] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.078344] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.078348] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.080344] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.080568] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.080725] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.080727] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.083397] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.083400] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.085383] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.085608] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.085766] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.085768] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.088796] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.088800] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.091057] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.091283] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.091479] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.091481] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.094184] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.094188] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.096363] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.096590] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.096748] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.096750] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.099446] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.099449] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.101427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.101652] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.101810] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.101812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.104456] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.104460] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.106474] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.106698] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.106856] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.106858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.109476] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.109480] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.111708] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.111930] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.112088] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.112090] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.114882] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.114886] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.117029] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.117254] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.117491] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.117493] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.120236] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.120240] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.122454] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.122704] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.122863] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.122865] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.125754] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.125758] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.128042] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.128269] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.128443] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.128447] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.131203] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.131206] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.133395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.133654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.133803] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.133805] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.136523] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.136528] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.138792] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.139021] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.139177] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.139180] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.142182] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.142186] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.144380] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.144595] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.144743] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.144745] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.147621] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.147626] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.149945] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.150170] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.150328] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.150330] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.153276] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.153279] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.155733] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.155960] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.156116] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.156118] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.159166] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.159170] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.161346] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.161566] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.161715] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.161717] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.164347] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.164351] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.166379] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.166594] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.166743] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.166745] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.169394] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.169398] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.171402] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.171616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.171763] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.171765] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.174448] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.174452] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.176410] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.176625] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.176774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.176776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.179820] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.179823] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.182078] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.182305] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.182505] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.182507] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.185158] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.185162] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.187394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.187611] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.187760] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.187762] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.190437] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.190441] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.192409] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.192622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.192770] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.192772] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.195479] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.195483] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.197699] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.197928] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.198090] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.198092] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.200813] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.200816] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.203053] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.203281] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.203452] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.203454] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.206174] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.206177] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.207908] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.208122] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.208269] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.208271] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.210971] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.210974] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.213271] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.213532] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.213680] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.213682] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.216329] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.216344] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.218397] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.218621] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.218771] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.218773] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.221398] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.221402] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.223445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.223672] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.223830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.223832] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.226416] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.226419] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.228445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.228671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.228828] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.228830] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.231447] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.231450] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.233393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.233617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.233774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.233776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.236382] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.236385] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.238410] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.238636] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.238792] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.238794] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.241413] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.241416] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.243400] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.243624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.243781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.243783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.246392] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.246396] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.248422] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.248648] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.248805] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.248807] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.252510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.252514] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.254845] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.255061] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.255208] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.255210] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.258692] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.258696] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.260934] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.261149] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.261297] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.261299] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.264720] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.264724] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.266941] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.267161] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.267308] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.267310] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.270622] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.270625] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.272843] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.273056] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.273204] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.273206] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.276589] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.276592] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.278804] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.279018] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.279164] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.279166] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.282496] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.282502] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.284943] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.285235] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.285499] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.285503] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.288396] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.288400] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.290430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.290664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.290821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.290823] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.293525] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.293529] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.295737] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.295951] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.296098] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.296100] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.299396] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.299399] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.301363] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.301578] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.301725] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.301727] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.304987] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.304990] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.307264] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.307517] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.307665] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.307667] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.308132] igt_reset_nop: 94 resets <6> [271.334514] i915: Running intel_hangcheck_live_selftests/igt_reset_nop_engine <6> [271.835816] igt_reset_nop_engine(rcs0): 873 resets <6> [272.336732] igt_reset_nop_engine(bcs0): 1147 resets <6> [272.837860] igt_reset_nop_engine(vcs0): 1083 resets <6> [273.338808] igt_reset_nop_engine(vecs0): 1160 resets <6> [273.354493] i915: Running intel_hangcheck_live_selftests/igt_reset_idle_engine <6> [273.855512] rcs0: Completed 4187 idle resets <6> [274.356407] bcs0: Completed 5733 idle resets <6> [274.857458] vcs0: Completed 5744 idle resets <6> [275.358462] vecs0: Completed 5911 idle resets <6> [275.358492] i915: Running intel_hangcheck_live_selftests/igt_reset_active_engine <6> [275.859769] rcs0: Completed 1018 active resets <6> [276.360501] bcs0: Completed 1371 active resets <6> [276.861658] vcs0: Completed 1365 active resets <6> [277.362357] vecs0: Completed 1381 active resets <6> [277.390569] i915: Running intel_hangcheck_live_selftests/igt_reset_fail_engine <6> [277.891570] igt_reset_fail_engine(rcs0): 1644 resets <6> [278.392655] igt_reset_fail_engine(bcs0): 1695 resets <6> [278.893480] igt_reset_fail_engine(vcs0): 1705 resets <6> [279.394455] igt_reset_fail_engine(vecs0): 1736 resets <6> [279.409507] i915: Running intel_hangcheck_live_selftests/igt_reset_engines <6> [279.910406] i915_reset_engine(rcs0:idle): 2341 resets <6> [280.411482] i915_reset_engine(bcs0:idle): 3513 resets <6> [280.912393] i915_reset_engine(vcs0:idle): 3573 resets <6> [281.413407] i915_reset_engine(vecs0:idle): 3452 resets <6> [281.914680] i915_reset_engine(rcs0:active): 894 resets <6> [282.415701] i915_reset_engine(bcs0:active): 1233 resets <6> [282.916390] i915_reset_engine(vcs0:active): 1238 resets <6> [283.417575] i915_reset_engine(vecs0:active): 1243 resets <6> [283.918342] i915_reset_engine(rcs0:others-idle): 4404 resets <6> [284.419368] i915_reset_engine(bcs0:others-idle): 5766 resets <6> [284.920394] i915_reset_engine(vcs0:others-idle): 5771 resets <6> [285.422363] i915_reset_engine(vecs0:others-idle): 5878 resets <6> [285.924338] i915_reset_engine(rcs0:others-active): 891 resets <6> [286.425570] i915_reset_engine(bcs0:others-active): 1201 resets <6> [286.927364] i915_reset_engine(vcs0:others-active): 1019 resets <6> [287.429506] i915_reset_engine(vecs0:others-active): 1007 resets <6> [287.931346] i915_reset_engine(rcs0:others-priority): 888 resets <6> [288.433588] i915_reset_engine(bcs0:others-priority): 1110 resets <6> [288.935374] i915_reset_engine(vcs0:others-priority): 1155 resets <6> [289.436371] i915_reset_engine(vecs0:others-priority): 1106 resets <6> [289.938436] i915_reset_engine(rcs0:self-priority): 1009 resets <6> [290.439511] i915_reset_engine(bcs0:self-priority): 1206 resets <6> [290.940455] i915_reset_engine(vcs0:self-priority): 1229 resets <6> [291.441640] i915_reset_engine(vecs0:self-priority): 1203 resets <6> [291.478436] i915: Running intel_hangcheck_live_selftests/igt_reset_engines_atomic <7> [291.478445] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [291.479729] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.479733] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.485430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.485748] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.485907] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.485909] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [291.501433] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [291.502084] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.502089] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.508465] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.508786] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.508954] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.508956] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.537520] i915: Running intel_hangcheck_live_selftests/igt_reset_queue <6> [291.540381] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.540389] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.543063] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.543585] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.543927] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.543932] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.545574] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.545581] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.548423] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.548864] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.549227] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.549231] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.550309] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.550316] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.553047] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.553538] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.553881] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.553886] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.554980] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.554987] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.557854] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.558302] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.558688] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.558693] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.559807] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.559815] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.562418] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.562835] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.563175] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.563180] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.564269] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.564277] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.567020] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.567489] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.567815] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.567841] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.568929] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.568937] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.571414] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.571792] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.572079] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.572083] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.573031] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.573037] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.575360] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.575737] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.576024] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.576028] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.576918] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.576923] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.579324] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.579683] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.579918] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.579921] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.580765] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.580771] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.583355] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.583717] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.583921] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.583924] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.584685] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.584690] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.590444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.590818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.591034] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.591037] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.591801] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.591806] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.594082] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.594393] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.594598] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.594601] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.595358] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.595363] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.597415] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.597707] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.597924] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.597927] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.598693] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.598698] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.601085] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.601399] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.601604] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.601607] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.602366] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.602371] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.604417] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.604710] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.604927] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.604930] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.605703] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.605708] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.608102] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.608466] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.608673] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.608676] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.609444] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.609449] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.611423] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.611718] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.611935] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.611938] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.612980] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.612985] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.615356] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.615637] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.615841] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.615844] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.616646] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.616650] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.619040] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.619352] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.619571] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.619574] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.620320] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.620325] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.622418] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.622714] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.622932] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.622935] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.623703] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.623708] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.626052] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.626379] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.626586] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.626589] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.627346] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.627350] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.629422] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.629714] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.629932] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.629935] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.630701] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.630705] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.633048] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.633364] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.633570] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.633573] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.634313] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.634318] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.636384] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.636664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.636868] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.636871] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.637642] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.637647] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.639965] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.640261] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.640500] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.640503] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.641241] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.641246] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.643361] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.643690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.643895] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.643898] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.644666] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.644670] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.647017] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.647378] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.647584] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.647587] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.648326] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.648346] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.650366] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.650759] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.651015] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.651018] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.651782] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.651786] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.654071] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.654515] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.654814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.654819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.655628] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.655633] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.658009] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.658359] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.658655] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.658659] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.659577] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.659582] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.661966] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.662325] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.662683] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.662688] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.663541] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.663546] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.665925] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.666298] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.666642] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.666647] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.667479] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.667484] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.669843] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.670230] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.670540] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.670545] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.671472] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.671477] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.673829] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.674120] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.674362] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.674365] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.675422] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.675427] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.677783] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.678076] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.678655] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.678661] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.679530] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.679534] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.681874] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.682236] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.682562] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.682567] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.683411] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.683416] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.685762] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1100MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.686128] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.686474] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.686479] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.687311] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.687315] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.689424] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.689721] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.690009] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.690014] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.691091] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.691096] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.693412] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.693703] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.693919] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.693921] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.694968] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.694973] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.697323] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.697664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.697879] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.697882] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.698928] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.698933] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.701292] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.701639] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.701875] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.701880] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.702916] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.702921] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.706365] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.706751] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.706953] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.706955] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.707708] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.707713] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.710078] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.710460] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.710673] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.710676] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.711425] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.711430] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.713696] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.714086] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.714419] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.714424] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.715166] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.715171] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.717394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.717786] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.718080] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.718084] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.718956] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.718961] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.721316] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.721764] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.722064] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.722069] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.722883] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.722888] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.725262] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.725688] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.725984] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.725988] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.726914] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.726919] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.729306] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1000MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.729654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.729948] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.729953] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.730927] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.730931] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.733457] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.733865] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.734156] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.734160] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.735005] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.735010] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.740445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.740817] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.741031] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.741033] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.741937] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.741943] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.744289] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.744577] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.744780] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.744783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.745707] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.745714] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.748093] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.748402] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.748618] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.748621] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.749614] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.749620] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.752001] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.752293] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.752522] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.752525] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.753328] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.753348] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.755754] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.756046] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.756263] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.756265] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.757091] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.757098] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.759414] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.759705] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.759921] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.759923] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.760701] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.760708] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.763028] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.763321] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.763585] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.763588] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.764341] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.764346] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.766987] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.767284] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.767543] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.767546] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.768289] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.768294] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.771424] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.771798] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.772011] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.772014] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.772891] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.772897] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.778449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.778822] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.779037] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.779040] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.780070] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.780075] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.782413] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.782705] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.782922] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.782927] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.784002] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.784007] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.786353] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.786644] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.786877] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.786882] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.787939] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.787946] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.790289] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.790591] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.790807] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.790810] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.791723] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.791730] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.794050] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.794394] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.794611] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.794614] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.795540] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.795547] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.797965] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.798258] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.798519] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.798522] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.799550] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.799556] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.801919] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.802202] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.802449] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.802452] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.803494] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.803499] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.809447] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.809818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.810034] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.810037] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.811084] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.811091] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.813393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.813687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.813904] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.813907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.814695] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.814701] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.817043] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.817351] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.817569] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.817572] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.818326] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.818355] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.820346] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.820641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.820860] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.820863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.821635] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.821640] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.824015] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.824313] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.824550] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.824553] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.825293] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.825298] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.827415] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.827710] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.827928] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.827931] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.828702] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.828706] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.831028] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.831328] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.831561] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.831564] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.832312] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.832317] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.835390] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.835765] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.835980] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.835983] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.836753] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.836758] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.842438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.842814] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.843029] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.843032] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.843791] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.843796] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.846104] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.846414] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.846623] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.846626] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.847390] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.847395] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.849396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.849675] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.849880] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.849883] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.850659] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.850664] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.853023] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.853316] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.853555] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.853558] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.854310] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.854315] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.856419] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.856714] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.856931] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.856934] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.857707] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.857712] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.860110] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.860442] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.860650] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.860652] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.861412] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.861417] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.863389] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.863667] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.863869] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.863872] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.864637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.864642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.866999] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.867297] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.867535] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.867539] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.868281] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.868286] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.870399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.870692] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.870909] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.870912] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.871688] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.871693] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.874040] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.874355] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.874562] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.874565] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.875306] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.875311] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.877397] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.877697] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.877917] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.877920] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.878688] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.878692] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.881029] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.881321] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.881555] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.881558] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.882299] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.882304] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.884398] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.884678] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.884882] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.884885] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.885658] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.885662] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.887994] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.888286] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.888526] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.888529] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.889270] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.889274] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.891406] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.892455] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.893276] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.893288] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.895790] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.895809] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.899057] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.900076] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.900981] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.900994] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.902884] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.902897] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.906108] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.906754] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.907179] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.907185] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.908555] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.908564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.911440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.911857] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.912180] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.912201] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.913328] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.913356] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.916105] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.916553] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.916841] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.916845] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.917818] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.917824] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.920355] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.920717] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.921008] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.921012] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.921946] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.921951] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.924420] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.924752] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.925000] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.925003] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.925877] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.925883] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.928317] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.928619] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.928837] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.928840] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.929639] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.929644] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.932028] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.932293] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.932499] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.932502] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.933207] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.933211] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.935431] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.935696] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.935889] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.935892] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.936613] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.936617] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.938949] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.939213] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.939424] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.939427] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.940133] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.940137] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.942386] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.942639] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.942821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.942823] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.943542] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.943546] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.945819] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.946085] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.946279] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.946281] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.946998] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.947002] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.949325] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.949605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.949786] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.949789] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.950499] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.950503] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.952777] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.953040] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.953234] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.953236] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.953955] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.953959] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.956260] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.956542] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.956724] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.956727] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.957439] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.957443] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.959426] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.959690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.959883] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.959885] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.960609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.960613] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.962951] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.963223] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.963436] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.963439] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.964142] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.964147] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.966392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.966642] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.966824] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.966826] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.967566] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.967570] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.969805] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.970057] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.970238] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.970241] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.970954] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.970958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.973203] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.973483] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.973665] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.973668] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.974386] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.974390] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.976396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.976649] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.976831] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.976834] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.977558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.977562] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.979810] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.980075] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.980270] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.980272] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.980994] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.980998] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.983292] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.983569] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.983751] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.983754] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.984468] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.984472] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.986770] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.987850] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.988784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.988798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.991321] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.991386] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.995387] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.996449] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.997025] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.997033] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.998903] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.998916] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.002077] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.002643] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.003048] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.003071] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.004483] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.004493] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.007417] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.007858] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.008201] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.008223] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.009378] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.009386] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.012119] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.012528] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.012817] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.012821] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.013792] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.013798] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.016312] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.016689] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.016927] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.016930] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.017799] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.017805] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.020214] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.020563] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.020797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.020800] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.021672] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.021677] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.024087] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.024405] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.024611] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.024614] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.025395] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.025400] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.027807] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.028072] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.028265] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.028268] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.028984] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.028988] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.031287] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.031561] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.031742] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.031745] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.032458] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.032462] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.034730] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.034995] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.035188] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.035191] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.035907] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.035911] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.038119] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.038406] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.038589] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.038592] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.038788] rcs0: Completed 123 queued resets <6> [292.040169] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.040173] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.042407] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.042660] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.042842] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.042845] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.043589] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.043593] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.045935] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.046203] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.046415] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.046418] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.047156] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.047160] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.049391] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.049661] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.049855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.049858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.050614] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.050619] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.052890] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.053154] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.053368] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.053371] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.054107] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.054111] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.056427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.056689] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.056871] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.056874] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.057625] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.057629] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.060001] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.060272] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.060486] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.060489] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.061224] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.061228] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.063421] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.063685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.063881] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.063884] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.064626] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.064630] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.066928] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.067193] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.067407] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.067410] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.068144] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.068148] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.070386] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.070638] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.070820] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.070822] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.071577] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.071582] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.073840] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.074106] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.074300] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.074302] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.075048] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.075052] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.077320] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.077591] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.077773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.077775] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.078519] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.078523] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.080758] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.081023] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.081217] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.081220] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.081954] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.081958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.084198] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.084480] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.084663] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.084665] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.085406] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.085410] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.087396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.087646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.087828] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.087831] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.088605] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.088610] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.090892] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.091156] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.091371] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.091374] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.092121] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.092125] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.094371] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.094624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.094806] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.094809] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.095563] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.095567] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.097884] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.098150] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.098361] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.098364] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.099113] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.099117] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.101410] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.101703] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.101885] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.101888] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.102666] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.102670] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.108419] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.108753] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.108932] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.108935] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.109699] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.109703] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.112052] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.112315] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.112527] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.112530] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.113267] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.113271] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.115429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.115694] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.115888] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.115890] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.116661] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.116665] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.118904] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.119157] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.119362] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.119365] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.120095] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.120099] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.122387] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.122639] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.122820] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.122822] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.123560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.123565] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.125786] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.126037] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.126217] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.126220] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.126956] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.126960] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.129238] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.129517] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.129701] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.129704] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.130456] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.130460] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.132720] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.132969] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.133150] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.133152] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.133886] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.133890] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.136112] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.136393] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.136587] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.136590] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.137329] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.137340] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.139400] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.139664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.139857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.139860] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.140591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.140595] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.142872] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.143127] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.143309] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.143312] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.144055] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.144059] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.146308] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.146623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.146818] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.146821] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.147565] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.147569] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.149828] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.150170] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.150374] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.150377] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.151102] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.151106] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.153324] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.153597] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.153790] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.153792] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.154536] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.154540] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.156784] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.157049] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.157243] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.157245] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.157976] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.157980] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.160284] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.160559] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.160753] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.160755] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.161494] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.161498] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.163752] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.164016] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.164211] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.164214] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.164947] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.164951] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.167197] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.167469] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.167663] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.167665] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.168417] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.168421] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.170421] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.170684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.170878] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.170881] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.171613] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.171617] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.173886] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.174135] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.174316] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.174318] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.175064] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.175069] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.177342] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.177608] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.177802] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.177804] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.178540] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.178545] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.180852] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.181116] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.181309] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.181312] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.182059] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.182063] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.184305] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.184579] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.184774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.184777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.185522] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.185526] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.187841] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.188105] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.188299] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.188301] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.189048] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.189052] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.191344] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.191615] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.191809] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.191811] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.192551] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.192555] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.194869] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.195135] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.195328] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.195343] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.196072] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.196076] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.198351] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.198615] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.198808] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.198811] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.199558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.199563] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.201847] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.202114] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.202307] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.202309] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.203056] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.203060] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.205317] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.205591] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.205784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.205787] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.206532] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.206536] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.208797] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.209061] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.209254] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.209257] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.210004] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.210009] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.212277] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.212552] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.212746] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.212749] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.213484] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.213488] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.215716] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.215981] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.216176] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.216179] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.216912] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.216916] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.219024] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.219289] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.219492] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.219495] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.220228] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.220232] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.222387] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.222651] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.222844] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.222847] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.223611] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.223615] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.225935] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.226199] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.226404] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.226407] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.227139] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.227143] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.229382] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.229649] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.229842] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.229844] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.230583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.230587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.232899] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.233149] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.233344] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.233347] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.234072] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.234076] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.236367] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.236632] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.236826] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.236828] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.237618] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.237622] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.239969] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.240234] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.240440] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.240442] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.241183] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.241187] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.243421] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.243686] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.243881] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.243884] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.244638] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.244642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.246991] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.247256] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.247463] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.247466] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.248201] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.248205] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.250421] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.250696] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.250888] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.250891] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.251663] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.251668] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.255391] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.255739] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.255930] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.255933] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.256685] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.256689] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.258990] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.259254] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.259462] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.259465] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.260206] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.260210] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.262389] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.262652] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.262846] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.262848] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.263600] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.263604] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.265882] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.266146] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.266353] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.266356] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.267091] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.267096] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.269383] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.269648] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.269842] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.269845] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.270620] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.270624] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.272867] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.273117] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.273298] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.273301] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.274044] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.274048] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.276305] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.276579] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.276773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.276775] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.277537] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.277541] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.279844] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.280108] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.280301] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.280303] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.281048] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.281052] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.283338] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.283603] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.283796] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.283799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.284543] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.284548] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.286817] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.287080] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.287274] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.287276] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.288020] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.288024] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.290281] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.290558] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.290751] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.290754] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.291510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.291515] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.293782] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.294046] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.294240] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.294243] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.295008] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.295012] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.297296] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.297569] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.297762] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.297764] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.298525] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.298530] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.300431] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.300695] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.300888] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.300891] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.301653] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.301657] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.303948] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.304211] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.304418] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.304421] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.305162] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.305166] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.307362] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.307627] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.307821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.307823] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.308594] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.308598] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.310859] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.311126] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.311320] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.311322] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.312066] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.312070] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.314363] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.314625] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.314819] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.314821] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.315582] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.315586] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.317872] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.318123] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.318304] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.318307] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.319051] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.319055] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.321352] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.321617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.321810] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.321813] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.322560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.322564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.324859] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.325124] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.325317] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.325320] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.326065] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.326069] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.328363] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.328626] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.328821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.328824] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.329583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.329587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.331884] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.332149] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.332356] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.332359] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.333097] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.333101] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.335428] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.335679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.335860] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.335863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.336633] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.336638] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.338985] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.339250] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.339457] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.339460] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.340193] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.340197] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.342421] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.342686] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.342879] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.342882] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.343646] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.343650] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.345977] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.346241] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.346448] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.346451] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.347182] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.347187] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.349393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.349657] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.349851] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.349854] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.350626] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.350630] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.353004] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.353270] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.353479] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.353482] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.354225] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.354229] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.356430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.356700] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.356893] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.356895] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.357678] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.357682] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.359988] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.360251] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.360460] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.360463] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.361210] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.361214] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.363399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.363664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.363860] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.363863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.364643] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.364647] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.366966] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.367232] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.367441] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.367444] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.368193] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.368197] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.370427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.370695] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.370890] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.370892] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.371674] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.371678] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.374016] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.374286] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.374493] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.374496] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.375239] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.375243] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.377429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.377694] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.377887] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.377890] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.378680] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.378684] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.381029] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.381295] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.381502] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.381505] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.382251] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.382256] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.384405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.384666] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.384846] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.384849] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.385643] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.385648] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.388161] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.388520] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.388711] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.388714] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.389479] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.389484] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.394446] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.394789] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.394980] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.394983] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.395757] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.395761] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.398104] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.398382] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.398593] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.398596] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.399351] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.399355] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.401426] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.401691] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.401885] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.401887] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.402682] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.402686] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.404987] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.405251] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.405460] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.405463] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.406215] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.406219] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.408391] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.408657] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.408851] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.408854] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.409631] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.409635] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.412013] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.412287] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.412494] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.412497] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.413241] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.413245] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.415428] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.415702] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.415896] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.415899] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.416668] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.416672] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.419166] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.419521] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.419714] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.419717] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.420460] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.420464] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.425449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.425794] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.425986] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.425989] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.426736] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.426741] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.429109] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.429391] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.429603] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.429606] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.430351] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.430355] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.432399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.432654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.432835] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.432838] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.433604] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.433608] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.435963] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.436229] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.436434] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.436437] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.437191] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.437196] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.439428] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.439680] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.439862] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.439865] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.440634] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.440638] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.443012] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.443276] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.443480] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.443483] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.444229] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.444233] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.446430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.446683] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.446865] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.446867] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.447642] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.447647] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.450018] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.450288] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.450490] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.450493] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.451234] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.451238] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.453424] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.453674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.453855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.453858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.454583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.454587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.456860] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.457112] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.457294] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.457297] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.458060] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.458064] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.460315] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.460581] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.460762] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.460764] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.461494] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.461499] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.463735] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.464000] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.464193] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.464195] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.464926] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.464930] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.467026] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.467292] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.467497] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.467499] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.468233] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.468237] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.470397] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.470649] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.470832] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.470835] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.471587] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.471591] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.473898] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.474162] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.474378] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.474381] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.475119] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.475123] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.477381] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.477642] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.477823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.477825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.478563] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.478567] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.482230] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.482584] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.482763] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.482766] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.483493] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.483497] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.485754] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.486018] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.486211] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.486214] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.486944] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.486949] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.489197] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.489475] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.489657] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.489660] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.490407] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.490411] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.492396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.492649] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.492830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.492833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.493566] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.493571] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.495897] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.496160] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.496423] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.496427] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.497394] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.497399] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.499429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.499682] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.499864] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.499866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.500825] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.500831] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.503122] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.503443] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.503626] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.503628] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.504390] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.504396] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.506396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.506646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.506827] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.506830] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.507568] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.507572] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.510107] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.510399] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.510583] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.510585] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.511323] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.511327] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.513421] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.513675] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.513861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.513864] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.514596] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.514600] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.516875] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.517127] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.517308] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.517311] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.518058] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.518063] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.520364] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.520619] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.520800] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.520803] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.521548] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.521552] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.523832] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.524085] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.524266] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.524268] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.525017] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.525021] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.527308] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.527578] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.527760] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.527763] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.528540] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.528545] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.530852] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.531116] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.531310] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.531313] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.532057] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.532061] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.534357] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.534622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.534815] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.534818] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.535562] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.535566] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.537849] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.538101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.538284] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.538287] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.539029] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.539033] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.541356] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.541621] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.541814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.541817] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.541997] bcs0: Completed 141 queued resets <6> [292.543478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.543482] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.545771] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.546034] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.546226] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.546228] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.547032] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.547036] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.549319] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.549618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.549799] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.549802] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.550597] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.550601] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.552923] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.553189] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.553422] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.553425] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.554204] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.554209] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.556349] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.556600] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.556779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.556781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.557591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.557595] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.559882] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.560175] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.560399] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.560404] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.561202] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.561206] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.563346] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.563596] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.563776] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.563779] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.564581] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.564585] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.566806] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.567054] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.567233] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.567236] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.568030] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.568034] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.570281] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.570548] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.570729] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.570732] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.571526] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.571530] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.573774] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.574052] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.574233] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.574236] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.575035] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.575039] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.577282] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.577582] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.577764] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.577766] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.578565] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.578570] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.580813] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.581064] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.581244] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.581247] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.582052] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.582057] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.584357] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.584607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.584787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.584790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.585590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.585594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.587948] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.588212] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.588428] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.588430] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.589214] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.589219] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.591349] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.591602] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.591781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.591784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.592599] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.592603] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.594887] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.595150] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.595371] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.595373] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.596155] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.596159] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.598395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.598674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.598855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.598858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.599670] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.599675] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.601977] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.602238] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.602463] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.602466] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.603245] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.603250] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.605418] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.605669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.605849] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.605852] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.606660] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.606664] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.608951] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.609213] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.609449] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.609452] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.610235] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.610239] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.612425] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.612693] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.612874] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.612877] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.613687] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.613691] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.616001] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.616263] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.616476] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.616479] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.617262] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.617266] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.619424] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.619674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.619857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.619859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.620670] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.620674] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.622969] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.623231] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.623446] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.623449] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.624231] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.624235] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.626424] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.626675] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.626856] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.626859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.627672] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.627676] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.630007] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.630269] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.630479] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.630481] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.631405] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.631410] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.633346] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.633614] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.633808] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.633810] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.634553] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.634557] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.636849] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.637117] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.637309] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.637312] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.638058] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.638062] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.640362] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.640627] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.640820] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.640823] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.641557] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.641561] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.643910] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.644178] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.644382] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.644385] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.645124] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.645129] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.647394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.647659] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.647854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.647856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.648588] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.648593] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.650894] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.651159] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.651370] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.651373] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.652122] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.652126] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.654407] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.654672] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.654864] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.654867] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.655627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.655631] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.658004] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.658268] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.658486] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.658489] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.659225] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.659229] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.661386] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.661651] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.661843] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.661846] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.662575] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.662579] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.664855] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.665104] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.665283] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.665285] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.666048] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.666052] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.668324] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.668600] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.668792] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.668794] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.669676] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.669682] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.672086] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.672377] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.672570] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.672573] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.673327] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.673345] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.675390] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.675655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.675849] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.675852] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.676586] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.676590] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.678917] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.679183] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.679391] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.679394] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.680134] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.680139] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.682359] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.682624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.682817] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.682819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.683566] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.683570] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.685888] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.686139] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.686320] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.686323] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.687068] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.687072] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.689352] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.689618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.689810] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.689813] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.690555] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.690559] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.692877] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.693128] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.693309] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.693311] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.694059] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.694063] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.696349] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.696614] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.696809] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.696812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.697550] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.697554] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.699861] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.700127] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.700320] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.700323] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.701071] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.701075] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.703320] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.703595] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.703789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.703791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.704527] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.704531] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.706829] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.707094] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.707287] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.707290] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.708035] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.708039] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.710279] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.710555] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.710750] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.710752] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.711485] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.711490] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.713742] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.714010] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.714203] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.714206] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.714944] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.714948] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.717185] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.717473] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.717667] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.717669] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.718412] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.718416] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.720385] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.720650] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.720844] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.720846] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.721587] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.721592] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.723817] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.724067] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.724248] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.724251] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.724994] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.724998] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.727293] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.727567] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.727760] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.727763] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.728498] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.728502] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.730754] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.731018] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.731212] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.731215] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.731946] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.731950] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.734204] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.734490] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.734685] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.734688] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.735424] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.735429] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.737392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.737656] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.737849] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.737852] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.738593] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.738597] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.740826] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.741077] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.741257] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.741260] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.742001] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.742005] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.744273] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.744546] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.744740] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.744743] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.745481] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.745485] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.747342] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.747605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.747797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.747799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.748541] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.748546] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.750836] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.751102] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.751295] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.751297] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.752039] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.752043] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.754280] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.754554] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.754750] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.754753] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.755485] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.755489] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.757766] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.758032] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.758226] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.758228] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.758962] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.758966] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.761236] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.761510] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.761703] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.761706] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.762452] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.762456] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.764391] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.764657] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.764852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.764854] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.765590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.765594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.767824] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.768073] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.768255] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.768257] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.769005] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.769009] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.771291] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.771561] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.771755] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.771757] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.772486] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.772491] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.774732] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.774996] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.775190] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.775193] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.775924] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.775929] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.778043] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.778306] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.778513] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.778516] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.779268] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.779272] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.781384] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.781647] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.781841] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.781843] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.782591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.782595] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.784825] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.785076] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.785257] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.785259] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.786012] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.786016] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.788281] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.788554] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.788748] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.788751] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.789488] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.789493] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.791759] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.792023] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.792216] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.792219] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.792951] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.792955] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.795231] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.795502] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.795697] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.795700] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.796441] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.796445] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.798394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.798660] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.798854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.798856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.799590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.799594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.801825] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.802076] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.802260] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.802262] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.803000] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.803004] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.805276] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.805546] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.805740] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.805742] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.806480] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.806484] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.808345] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.808608] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.808801] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.808804] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.809549] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.809553] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.811811] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.812074] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.812268] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.812270] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.813017] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.813022] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.815295] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.815567] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.815761] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.815764] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.816512] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.816517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.818763] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.819028] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.819221] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.819224] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.819956] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.819960] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.822255] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.822530] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.822724] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.822727] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.823468] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.823472] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.825343] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.825605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.825797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.825800] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.826548] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.826552] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.828848] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.829112] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.829304] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.829307] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.830056] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.830060] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.832306] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.832582] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.832777] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.832779] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.833519] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.833523] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.835794] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.836057] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.836250] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.836253] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.836996] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.837000] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.839294] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.839567] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.839761] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.839763] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.840496] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.840500] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.842774] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.843040] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.843232] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.843235] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.843962] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.843967] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.846271] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.846545] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.846738] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.846741] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.847478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.847482] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.849342] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.849604] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.849795] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.849798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.850543] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.850547] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.852785] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.853048] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.853242] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.853244] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.853976] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.853980] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.856278] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.856553] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.856748] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.856751] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.857484] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.857488] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.859704] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.859968] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.860162] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.860165] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.860896] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.860900] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.863025] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.863291] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.863497] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.863500] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.864235] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.864239] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.866387] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.866650] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.866845] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.866847] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.867581] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.867586] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.869895] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.870148] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.870329] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.870342] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.871067] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.871072] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.873349] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.873612] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.873806] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.873809] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.874552] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.874556] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.876832] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.877095] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.877289] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.877292] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.878034] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.878038] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.880309] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.880584] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.880779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.880781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.881528] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.881532] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.883818] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.884084] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.884277] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.884279] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.885037] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.885042] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.887343] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.887607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.887800] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.887803] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.888549] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.888554] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.890836] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.891101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.891294] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.891296] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.892043] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.892047] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.894319] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.894590] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.894784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.894786] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.895535] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.895539] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.897872] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.898136] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.898349] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.898352] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.899081] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.899086] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.901326] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.901602] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.901796] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.901798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.902546] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.902550] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.904879] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.905145] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.905351] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.905354] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.906088] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.906092] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.908384] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.908648] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.908841] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.908843] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.909592] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.909596] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.911886] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.912136] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.912317] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.912319] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.913067] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.913071] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.915386] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.915653] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.915847] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.915850] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.916585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.916589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.918898] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.919153] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.919344] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.919347] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.920079] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.920083] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.922378] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.922641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.922833] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.922836] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.923589] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.923593] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.925891] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.926155] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.926360] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.926363] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.927101] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.927105] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.929364] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.929629] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.929823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.929826] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.930568] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.930572] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.932834] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.933105] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.933298] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.933300] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.934104] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.934108] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.936369] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.936631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.936823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.936825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.937560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.937564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.939789] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.940051] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.940244] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.940246] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.940981] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.940985] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.943202] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.943475] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.943667] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.943669] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.944410] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.944414] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.946392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.946656] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.946848] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.946850] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.947582] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.947587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.949853] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.950115] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.950307] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.950310] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.951057] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.951061] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.953325] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.953595] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.953789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.953792] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.954534] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.954538] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.956834] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.957096] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.957288] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.957291] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.958043] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.958047] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.960327] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.960602] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.960797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.960799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.961546] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.961550] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.963820] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.964083] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.964275] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.964277] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.965021] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.965025] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.967354] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.967617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.967808] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.967811] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.968547] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.968552] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.970814] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.971077] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.971269] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.971272] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.972015] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.972019] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.974276] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.974552] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.974744] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.974747] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.975478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.975482] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.977717] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.977979] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.978171] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.978174] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.978904] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.978908] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.981070] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.981346] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.981539] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.981541] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.982274] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.982278] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.984388] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.984641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.984821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.984823] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.985560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.985565] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.987869] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.988120] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.988300] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.988302] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.989046] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.989051] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.991325] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.991598] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.991791] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.991793] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.992535] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.992539] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.994795] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.995058] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.995250] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.995253] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.995996] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.996000] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.998317] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.998592] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.998784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.998787] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.999527] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.999531] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.001792] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.002056] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.002248] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.002251] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.002992] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.002996] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.005258] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.005531] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.005722] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.005725] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.006465] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.006470] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.008346] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.008594] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.008774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.008776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.009513] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.009517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.011740] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.012004] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.012195] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.012198] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.012928] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.012932] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.015027] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.015291] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.015495] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.015497] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.016230] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.016234] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.018390] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.018657] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.018850] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.018853] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.019591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.019595] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.021870] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.022126] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.022307] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.022309] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.023053] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.023057] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.025296] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.025570] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.025762] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.025765] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.026497] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.026501] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.028754] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.029017] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.029209] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.029211] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.029942] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.029946] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.032211] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.032485] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.032679] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.032681] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.033428] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.033432] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.035422] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.035684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.035876] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.035879] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.036617] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.036621] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.038943] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.039206] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.039410] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.039413] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.040144] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.040148] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.042406] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.042669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.042861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.042863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.043043] vcs0: Completed 145 queued resets <6> [293.044396] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.044401] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.046429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.046695] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.046887] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.046889] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.047626] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.047631] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.049959] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.050224] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.050442] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.050445] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.051186] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.051190] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.053419] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.053684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.053876] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.053879] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.054613] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.054617] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.056942] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.057205] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.057431] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.057434] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.058163] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.058168] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.060400] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.060663] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.060855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.060858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.061596] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.061600] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.063915] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.064179] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.064404] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.064407] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.065150] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.065155] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.067413] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.067677] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.067869] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.067871] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.068612] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.068616] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.070952] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.071218] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.071445] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.071448] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.072176] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.072180] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.074422] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.074685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.074875] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.074878] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.075627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.075631] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.077966] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.078231] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.078456] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.078459] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.079193] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.079197] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.081400] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.081666] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.081857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.081860] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.082594] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.082598] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.084911] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.085173] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.085410] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.085413] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.086147] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.086152] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.088400] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.088664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.088855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.088858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.089591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.089595] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.091908] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.092170] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.092402] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.092405] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.093134] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.093138] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.095400] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.095662] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.095856] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.095858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.096597] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.096601] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.098879] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.099141] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.099366] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.099369] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.100104] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.100108] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.102361] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.102624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.102817] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.102819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.103568] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.103573] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.105857] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.106105] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.106285] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.106287] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.107039] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.107043] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.109277] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.109549] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.109742] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.109744] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.110475] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.110479] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.112719] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.112981] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.113174] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.113176] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.113908] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.113912] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.116098] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.116386] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.116578] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.116581] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.117312] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.117316] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.119399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.119655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.119837] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.119839] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.120573] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.120577] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.122885] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.123148] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.123354] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.123357] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.124094] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.124098] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.126430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.126680] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.126862] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.126865] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.127614] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.127619] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.129900] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.130149] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.130345] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.130348] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.131076] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.131080] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.133365] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.133622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.133803] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.133806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.134545] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.134549] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.136850] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.137114] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.137308] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.137310] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.138063] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.138067] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.140348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.140599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.140780] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.140783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.141532] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.141536] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.143803] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.144068] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.144262] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.144264] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.145016] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.145020] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.147291] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.147560] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.147742] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.147744] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.148485] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.148490] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.150419] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.150670] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.150851] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.150854] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.151585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.151589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.153848] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.154099] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.154281] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.154283] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.155047] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.155051] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.157348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.157599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.157780] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.157783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.158527] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.158532] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.160861] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.161130] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.161323] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.161325] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.162079] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.162083] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.164427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.164679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.164861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.164863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.165617] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.165622] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.167927] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.168194] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.168404] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.168407] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.169145] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.169149] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.171397] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.171652] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.171834] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.171836] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.172585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.172589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.174856] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.175106] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.175287] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.175290] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.176038] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.176042] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.178295] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.178568] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.178749] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.178751] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.179489] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.179493] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.181759] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.182023] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.182217] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.182219] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.182954] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.182958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.185253] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.185522] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.185704] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.185707] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.186453] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.186458] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.188392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.188646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.188828] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.188830] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.189560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.189564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.191805] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.192070] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.192263] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.192266] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.193010] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.193014] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.195308] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.195571] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.195756] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.195758] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.196496] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.196501] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.198749] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.199015] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.199208] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.199211] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.199948] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.199953] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.202160] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.202433] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.202615] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.202618] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.203364] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.203368] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.205443] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.205696] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.205877] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.205880] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.206638] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.206642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.208953] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.209216] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.209425] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.209428] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.210162] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.210166] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.212385] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.212637] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.212819] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.212822] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.213579] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.213583] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.215902] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.216166] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.216374] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.216377] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.217110] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.217114] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.219371] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.219623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.219804] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.219807] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.220547] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.220551] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.222858] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.223122] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.223315] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.223317] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.224073] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.224077] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.226358] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.226609] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.226791] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.226793] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.227543] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.227547] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.229856] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.230120] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.230313] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.230316] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.231083] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.231088] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.233347] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.233598] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.233780] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.233783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.234527] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.234532] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.236854] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.237120] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.237316] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.237319] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.238069] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.238073] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.240386] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.240638] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.240820] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.240822] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.241556] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.241560] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.243850] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.244101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.244281] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.244284] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.244971] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.244975] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.247260] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.247533] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.247715] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.247718] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.248462] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.248467] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.250695] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.250946] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.251127] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.251130] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.251860] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.251864] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.254072] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.254362] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.254547] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.254549] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.255284] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.255288] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.257427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.257680] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.257861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.257863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.258595] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.258599] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.260862] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.261111] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.261291] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.261294] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.262050] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.262054] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.264299] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.264571] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.264753] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.264756] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.265488] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.265492] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.267720] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.267984] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.268179] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.268181] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.268913] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.268917] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.271127] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.271416] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.271599] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.271602] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.272343] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.272348] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.274349] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.274598] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.274779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.274781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.275525] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.275529] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.277775] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.278042] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.278235] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.278238] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.278971] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.278975] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.281279] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.281550] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.281733] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.281735] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.282469] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.282473] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.284716] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.284982] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.285177] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.285180] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.285911] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.285915] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.288062] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.288352] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.288535] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.288538] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.289266] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.289270] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.291444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.291714] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.291896] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.291898] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.292633] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.292637] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.294922] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.295187] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.295393] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.295396] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.296136] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.296140] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.298437] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.298688] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.298870] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.298873] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.299609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.299613] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.301960] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.302227] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.302433] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.302436] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.303167] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.303171] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.305382] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.305634] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.305816] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.305818] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.306560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.306564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.308871] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.309136] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.309328] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.309348] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.310077] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.310081] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.312393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.312646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.312827] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.312830] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.313564] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.313568] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.315955] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.316223] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.316430] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.316433] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.317170] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.317175] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.319437] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.319689] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.319870] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.319872] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.320628] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.320632] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.322890] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.323142] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.323323] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.323325] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.324085] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.324089] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.326381] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.326635] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.326817] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.326820] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.327572] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.327576] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.329845] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.330111] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.330303] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.330306] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.331058] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.331062] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.333349] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.333602] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.333784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.333787] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.334537] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.334541] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.336845] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.337111] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.337305] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.337308] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.338069] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.338073] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.340361] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.340615] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.340796] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.340799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.341549] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.341553] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.343840] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.344106] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.344298] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.344300] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.345061] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.345065] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.347348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.347600] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.347781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.347784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.348531] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.348535] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.350858] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.351123] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.351316] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.351318] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.352074] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.352078] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.354355] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.354607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.354788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.354791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.355535] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.355539] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.357777] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.358043] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.358236] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.358239] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.358980] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.358984] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.361286] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.361556] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.361737] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.361740] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.362473] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.362478] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.364420] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.364670] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.364850] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.364853] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.365594] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.365598] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.367830] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.368081] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.368263] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.368265] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.369022] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.369026] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.371271] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.371543] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.371724] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.371727] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.372472] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.372476] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.374354] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.374604] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.374785] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.374788] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.375534] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.375538] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.377808] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.378060] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.378241] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.378244] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.379005] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.379009] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.381280] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.381549] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.381731] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.381734] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.382471] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.382475] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.384709] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.384974] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.385167] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.385169] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.385915] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.385919] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.388029] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.388293] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.388498] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.388501] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.389248] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.389252] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.391399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.391653] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.391834] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.391837] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.392667] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.392671] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.394939] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.395206] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.395422] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.395425] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.396165] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.396169] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.398363] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.398616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.398797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.398800] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.399543] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.399547] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.401828] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.402079] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.402261] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.402263] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.403031] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.403036] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.405311] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.405577] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.405760] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.405762] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.406515] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.406520] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.408455] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.408707] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.408889] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.408891] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.409635] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.409639] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.411890] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.412141] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.412321] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.412324] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.413079] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.413083] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.415390] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.415641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.415822] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.415825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.416556] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.416560] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.418835] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.419100] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.419294] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.419296] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.420055] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.420059] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.422311] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.422581] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.422763] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.422766] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.423519] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.423523] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.425799] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.426062] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.426256] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.426259] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.427011] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.427016] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.429311] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.429577] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.429759] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.429761] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.430501] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.430506] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.432791] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.433056] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.433249] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.433251] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.434003] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.434007] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.436358] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.436610] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.436791] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.436794] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.437546] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.437550] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.439854] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.440119] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.440312] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.440315] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.441068] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.441072] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.443354] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.443607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.443788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.443791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.444543] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.444547] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.446860] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.447126] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.447319] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.447321] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.448076] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.448080] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.450356] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.450607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.450789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.450791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.451542] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.451546] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.453858] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.454125] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.454318] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.454321] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.455083] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.455087] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.457376] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.457629] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.457811] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.457813] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.458578] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.458583] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.460867] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.461119] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.461300] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.461303] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.462076] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.462080] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.464364] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.464615] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.464797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.464799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.465562] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.465566] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.467877] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.468128] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.468309] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.468311] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.469066] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.469070] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.471320] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.471588] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.471770] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.471773] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.472532] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.472536] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.474806] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.475059] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.475241] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.475243] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.476001] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.476005] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.478348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.478600] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.478781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.478784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.479532] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.479536] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.481842] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.482107] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.482300] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.482303] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.483060] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.483064] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.485354] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.485604] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.485785] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.485788] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.486532] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.486536] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.488848] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.489101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.489283] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.489285] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.490041] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.490045] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.492315] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.492582] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.492765] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.492767] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.493516] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.493520] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.495794] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.496057] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.496250] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.496253] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.497007] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.497011] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.499355] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.499608] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.499789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.499791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.500537] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.500542] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.502805] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.503056] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.503237] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.503240] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.503995] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.503999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.506325] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.506593] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.506775] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.506777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.507534] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.507539] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.509859] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.510123] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.510317] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.510320] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.511080] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.511084] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.513372] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.513624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.513810] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.513812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.514561] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.514566] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.516848] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.517100] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.517282] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.517284] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.518050] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.518054] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.520302] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.520569] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.520750] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.520753] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.521502] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.521506] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.523785] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.524050] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.524245] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.524248] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.525003] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.525007] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.527258] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.527531] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.527713] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.527716] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.528467] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.528471] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.530714] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.530963] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.531144] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.531146] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.531898] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.531902] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.534062] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.534346] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.534527] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.534530] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.535264] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.535268] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.537434] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.537687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.537868] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.537870] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.538630] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.538634] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.540898] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.541151] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.541350] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.541355] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.542089] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.542094] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.544390] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.544641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.544823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.544825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.545005] vecs0: Completed 145 queued resets <6> [293.579501] i915: Running intel_hangcheck_live_selftests/igt_reset_wait <6> [293.581464] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.581471] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.583410] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.583768] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.584039] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.584059] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.612588] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_ggtt <6> [293.621285] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.621305] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.625301] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.626427] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.627254] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.627266] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.658586] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_ppgtt <6> [293.665663] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.665666] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.668043] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.668284] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.668468] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.668470] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.697473] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence <6> [293.700260] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.700268] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.702785] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.703208] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.703606] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.703631] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.741566] i915: Running intel_hangcheck_live_selftests/igt_handle_error <7> [293.778462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [293.778806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [293.779055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [293.779298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [293.779561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [293.799859] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [293.868986] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [293.921672] i915: probe of 0000:00:02.0 failed with error -25 <6> [294.085186] [IGT] i915_selftest: finished subtest hangcheck, SUCCESS

<6> [269.970658] [IGT] i915_selftest: starting dynamic subtest hangcheck

<5> [270.059252] Setting dangerous option enable_guc - tainting kernel

<5> [270.059258] Setting dangerous option live_selftests - tainting kernel

<7> [270.089283] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [270.089489] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [270.089637] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [270.089647] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP)

<7> [270.089781] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [270.089963] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [270.090083] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [270.090741] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [270.090904] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [270.091061] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [270.091220] i915 0000:00:02.0: vgaarb: deactivate vga console

<7> [270.091464] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047

<7> [270.091654] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [270.092038] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8c90a018

<7> [270.092261] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [270.092468] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [270.092655] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [270.092840] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [270.097124] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [270.097271] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [270.097434] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [270.097667] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [270.097855] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [270.098026] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [270.098200] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [270.098780] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [270.098930] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [270.099078] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [270.099223] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [270.099402] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [270.099556] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [270.099677] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [270.100263] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [270.100516] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209

<7> [270.100758] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [270.100980] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [270.101208] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [270.101426] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [270.101674] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [270.101876] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [270.102083] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [270.102288] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [270.102502] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [270.102777] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [270.102976] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [270.103179] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [270.103386] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [270.103589] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [270.103791] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [270.103994] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [270.104197] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [270.104407] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [270.104641] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [270.104840] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [270.105038] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [270.105237] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9

<7> [270.105443] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [270.105643] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 10

<7> [270.105841] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [270.106039] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 10

<7> [270.106238] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [270.106482] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [270.106726] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [270.106936] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [270.107176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [270.107403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [270.107609] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [270.107813] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [270.108013] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [270.108214] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [270.108487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [270.108702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [270.108901] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [270.109116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [270.109360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [270.109639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [270.109839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [270.110039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [270.110273] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [270.111384] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [270.111853] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [270.112220] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [270.112419] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [270.112579] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [270.112719] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [270.112858] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [270.113030] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [270.113168] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [270.113306] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [270.113539] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [270.113695] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [270.114732] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [270.115520] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [270.115710] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [270.115856] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [270.118413] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [270.118584] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [270.118725] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [270.118862] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [270.119005] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [270.119142] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [270.119280] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [270.119485] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [270.119656] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [270.119807] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [270.119945] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [270.120115] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [270.120301] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [270.120484] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [270.120672] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [270.120795] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [270.120920] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [270.121086] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [270.121331] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [270.121534] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [270.121744] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [270.121874] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [270.122033] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [270.122163] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [270.342346] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.353344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.364344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.375344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.386346] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.397344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.408344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.419344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.430345] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.441344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.452344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.463346] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.474346] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.485343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.496343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.507343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.518344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.529343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.540343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.551344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.562344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.573343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.584343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.595344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.606344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.617343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.628343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.639343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.650344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.661342] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.672343] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.683344] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.683521] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [270.683533] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [270.683592] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [270.683758] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [270.683941] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [270.684071] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [270.684408] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [270.684541] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [270.684733] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI D/PHY D] Using AUX CH D (VBT)

<7> [270.684876] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI D/PHY D]

<7> [270.685193] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [270.685327] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D/PHY D]

<7> [270.685530] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:108:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [270.685776] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:119:DDI E/PHY E] Using AUX CH A (VBT)

<7> [270.685913] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:119:DDI E/PHY E]

<7> [270.686085] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [270.686410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [270.686619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [270.686766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [270.686902] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [270.687035] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [270.687168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [270.687301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [270.687499] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [270.687693] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [270.687881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [270.688017] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [270.688153] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [270.688289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [270.688543] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [270.688725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [270.688887] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST A] hw state readout: disabled, pipe A

<7> [270.689068] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST B] hw state readout: disabled, pipe B

<7> [270.689196] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST C] hw state readout: disabled, pipe C

<7> [270.689328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [270.689530] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [270.689729] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [270.689867] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [270.690004] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [270.690168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [270.690379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [270.690541] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [270.690679] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:HDMI-A-3] hw state readout: disabled

<7> [270.690815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:120:DP-2] hw state readout: disabled

<7> [270.690943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [270.691072] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [270.691199] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [270.691327] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [270.691526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [270.691740] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [270.691872] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [270.692003] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [270.692143] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [270.692293] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [270.692544] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [270.692755] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [270.692995] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [270.693131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [270.693266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [270.693466] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [270.693666] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [270.693796] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [270.693923] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [270.696283] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [270.696508] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [270.696654] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [270.696765] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [270.696891] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [270.697835] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [270.697980] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [270.698103] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0

<7> [270.702481] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [270.702640] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [270.702837] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [270.724313] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [270.724506] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [270.724666] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [270.724792] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [270.724916] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [270.725041] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x3e920000

<7> [270.725165] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [270.725290] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [270.725423] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [270.725650] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [270.725781] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [270.725912] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [270.726110] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [270.726308] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [270.726494] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [270.727685] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.727688] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.732474] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.733134] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.733282] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.733284] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [270.741135] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [270.741242] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [270.741387] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [270.741570] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [270.741876] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [270.742210] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [270.742381] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [270.742580] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [270.742705] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [270.742846] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [270.746393] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [270.746668] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [270.746926] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1

<7> [270.747491] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<7> [270.747752] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:HDMI-A-3] generating connector hotplug event

<7> [270.747995] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2

<7> [270.748549] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:120:DP-2] generating connector hotplug event

<6> [270.748586] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [270.749925] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [270.761954] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [270.763671] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input86

<7> [270.764153] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [270.764634] i915 display info: display version: 9

<7> [270.764637] i915 display info: cursor_needs_physical: no

<7> [270.764638] i915 display info: has_cdclk_crawl: no

<7> [270.764640] i915 display info: has_cdclk_squash: no

<7> [270.764641] i915 display info: has_ddi: yes

<7> [270.764642] i915 display info: has_dp_mst: yes

<7> [270.764644] i915 display info: has_dsb: no

<7> [270.764645] i915 display info: has_fpga_dbg: yes

<7> [270.764646] i915 display info: has_gmch: no

<7> [270.764648] i915 display info: has_hotplug: yes

<7> [270.764649] i915 display info: has_hti: no

<7> [270.764650] i915 display info: has_ipc: yes

<7> [270.764651] i915 display info: has_overlay: no

<7> [270.764653] i915 display info: has_psr: yes

<7> [270.764654] i915 display info: has_psr_hw_tracking: yes

<7> [270.764655] i915 display info: overlay_needs_physical: no

<7> [270.764656] i915 display info: supports_tv: no

<7> [270.764658] i915 display info: has_hdcp: yes

<7> [270.764659] i915 display info: has_dmc: yes

<7> [270.764660] i915 display info: has_dsc: no

<7> [270.764666] [drm:drm_client_modeset_probe]

<7> [270.764699] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [270.764663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [270.764705] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [270.764855] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [270.764865] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [270.764870] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [270.764826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [270.764873] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [270.765010] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [270.765017] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [270.765020] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [270.764971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [270.765024] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [270.765162] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [270.765169] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [270.765172] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3]

<7> [270.765112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [270.765175] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [270.765312] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] status updated from unknown to disconnected

<7> [270.765318] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [270.765321] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2]

<7> [270.765325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [270.765561] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] status updated from unknown to disconnected

<7> [270.765573] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected

<7> [270.765578] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [270.765583] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [270.765587] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [270.765604] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [270.765606] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [270.765609] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [270.765642] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [270.765653] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [270.765668] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [270.765692] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [270.765653] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [270.765813] i915 device info: pciid=0x3e92 rev=0x00 platform=COFFEELAKE (subplatform=0x0) gen=9

<7> [270.765817] i915 device info: graphics version: 9

<7> [270.765818] i915 device info: media version: 9

<7> [270.765820] i915 device info: graphics stepping: **

<7> [270.765821] i915 device info: media stepping: **

<7> [270.765823] i915 device info: display stepping: **

<7> [270.765824] i915 device info: base die stepping: **

<7> [270.765826] i915 device info: gt: 2

<7> [270.765827] i915 device info: memory-regions: 0x21

<7> [270.765829] i915 device info: page-sizes: 0x11000

<7> [270.765830] i915 device info: platform: COFFEELAKE

<7> [270.765832] i915 device info: ppgtt-size: 48

<7> [270.765833] i915 device info: ppgtt-type: 2

<7> [270.765835] i915 device info: dma_mask_size: 39

<7> [270.765836] i915 device info: is_mobile: no

<7> [270.765838] i915 device info: is_lp: no

<7> [270.765840] i915 device info: require_force_probe: no

<7> [270.765841] i915 device info: is_dgfx: no

<7> [270.765842] i915 device info: has_64bit_reloc: yes

<7> [270.765844] i915 device info: has_64k_pages: no

<7> [270.765845] i915 device info: gpu_reset_clobbers_display: no

<7> [270.765847] i915 device info: has_reset_engine: yes

<7> [270.765848] i915 device info: has_3d_pipeline: yes

<7> [270.765850] i915 device info: has_flat_ccs: no

<7> [270.765851] i915 device info: has_global_mocs: no

<7> [270.765853] i915 device info: has_gmd_id: no

<7> [270.765854] i915 device info: has_gt_uc: yes

<7> [270.765856] i915 device info: has_heci_pxp: no

<7> [270.765857] i915 device info: has_heci_gscfi: no

<7> [270.765858] i915 device info: has_guc_deprivilege: no

<7> [270.765860] i915 device info: has_guc_tlb_invalidation: no

<7> [270.765861] i915 device info: has_l3_ccs_read: no

<7> [270.765863] i915 device info: has_l3_dpf: no

<7> [270.765864] i915 device info: has_llc: yes

<7> [270.765866] i915 device info: has_logical_ring_contexts: yes

<7> [270.765867] i915 device info: has_logical_ring_elsq: no

<7> [270.765869] i915 device info: has_media_ratio_mode: no

<7> [270.765870] i915 device info: has_mslice_steering: no

<7> [270.765872] i915 device info: has_oa_bpc_reporting: no

<7> [270.765873] i915 device info: has_oa_slice_contrib_limits: no

<7> [270.765875] i915 device info: has_oam: no

<7> [270.765876] i915 device info: has_one_eu_per_fuse_bit: no

<7> [270.765878] i915 device info: has_pxp: no

<7> [270.765879] i915 device info: has_rc6: yes

<7> [270.765880] i915 device info: has_rc6p: no

<7> [270.765882] i915 device info: has_rps: yes

<7> [270.765883] i915 device info: has_runtime_pm: yes

<7> [270.765885] i915 device info: has_snoop: no

<7> [270.765886] i915 device info: has_coherent_ggtt: yes

<7> [270.765888] i915 device info: tuning_thread_rr_after_dep: no

<7> [270.765889] i915 device info: unfenced_needs_alignment: no

<7> [270.765891] i915 device info: hws_needs_physical: no

<7> [270.765892] i915 device info: has_pooled_eu: no

<7> [270.765893] i915 device info: rawclk rate: 24000 kHz

<7> [270.765895] i915 device info: iommu: disabled

<7> [270.765897] i915 device info: available engines: 40403

<7> [270.765899] i915 device info: slice total: 1, mask=0001

<7> [270.765901] i915 device info: subslice total: 3

<7> [270.765902] i915 device info: slice0: 3 subslices, mask=00000007

<7> [270.765904] i915 device info: slice1: 0 subslices, mask=00000000

<7> [270.765906] i915 device info: slice2: 0 subslices, mask=00000000

<7> [270.765908] i915 device info: EU total: 24

<7> [270.765909] i915 device info: EU per subslice: 8

<7> [270.765910] i915 device info: has slice power gating: no

<7> [270.765912] i915 device info: has subslice power gating: no

<7> [270.765913] i915 device info: has EU power gating: yes

<6> [270.765915] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [270.765917] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [270.765919] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [270.765921] i915: Performing live selftests with st_random_seed=0x8c4b6133 st_timeout=500

<6> [270.765923] i915: Running hangcheck

<6> [270.765941] i915: Running intel_hangcheck_live_selftests/igt_hang_sanitycheck

<7> [270.766184] [drm:drm_client_modeset_probe]

<7> [270.766209] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [270.766214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [270.766368] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [270.766372] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [270.766376] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [270.766534] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [270.766540] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [270.766546] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [270.766724] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [270.766728] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3]

<7> [270.766732] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [270.766954] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [270.766958] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2]

<7> [270.766962] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [270.767110] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected

<7> [270.767115] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [270.767120] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [270.767124] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [270.767127] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [270.767131] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [270.767135] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [270.767148] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [270.767157] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [270.767174] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [270.767181] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [270.801584] i915: Running intel_hangcheck_live_selftests/igt_reset_nop

<6> [270.804926] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.804964] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.807082] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.807622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.807783] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.807785] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.812106] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.812110] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.814418] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.814667] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.814837] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.814839] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.817751] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.817755] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.820070] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.820315] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.820498] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.820500] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.823358] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.823362] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.825394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.825636] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.825804] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.825807] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.828668] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.828672] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.830936] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.831177] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.831361] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.831363] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.834629] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.834633] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.836914] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.837156] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.837325] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.837328] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.840368] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.840372] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.842389] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.842633] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.842804] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.842806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.845738] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.845742] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.848012] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.848254] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.848436] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.848439] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.851416] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.851420] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.853433] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.853676] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.853845] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.853848] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.856681] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.856686] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.859011] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.859252] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.859463] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.859466] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.862261] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.862265] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.864357] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.864606] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.864774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.864777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.867656] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.867660] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.871417] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.872178] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.872356] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.872358] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.875258] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.875262] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.877358] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.877596] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.877764] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.877766] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.880455] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.880459] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.882365] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.882606] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.882774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.882776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.885516] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.885520] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.887826] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.888067] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.888235] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.888237] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [270.890396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<6> [270.891088] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.891092] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.893408] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.893648] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.893817] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.893819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.896765] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.896769] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.899028] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.899270] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.899500] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.899502] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.902311] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.902315] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.904413] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.904656] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.904826] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.904828] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.907573] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.907577] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.909853] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.910094] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.910263] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.910265] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.913156] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.913160] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.915402] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.915650] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.915818] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.915821] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.918480] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.918484] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.920399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.920622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.920779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.920781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.923474] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.923478] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.925405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.925630] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.925787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.925789] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.928384] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.928388] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.930405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.930632] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.930789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.930791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.933455] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.933459] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.935405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.935632] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.935789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.935791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.938437] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.938441] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.940405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.940630] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.940787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.940789] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.943409] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.943413] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.945412] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.945636] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.945793] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.945795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.948407] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.948411] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.950428] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.950655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.950814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.950816] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.953401] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.953405] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.955448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.955677] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.955836] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.955838] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.958450] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.958454] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.960418] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.960643] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.960800] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.960802] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.963378] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.963382] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.965399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.965624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.965782] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.965784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.968417] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.968421] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.970427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.970654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.970812] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.970814] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.973421] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.973425] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.975405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.975629] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.975785] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.975787] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.978452] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.978455] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.980408] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.980631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.980788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.980790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.983433] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.983437] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.985401] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.985626] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.985784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.985786] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.988332] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.988374] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.990401] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.990625] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.990782] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.990784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.993436] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.993439] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.995397] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.995622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.995779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.995781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.998432] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.998436] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.000401] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.000626] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.000783] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.000785] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.003378] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.003381] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.005399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.005623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.005779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.005781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.008566] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.008569] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.010815] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.011040] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.011197] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.011199] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.013900] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.013903] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.016026] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.016252] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.016502] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.016505] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.019133] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.019136] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.021370] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.021586] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.021735] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.021737] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.025146] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.025150] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.027442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.027655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.027802] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.027804] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.030578] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.030582] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.032813] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.033032] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.033181] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.033183] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.036378] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.036382] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.038408] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.038637] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.038786] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.038788] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.041713] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.041716] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.044056] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.044282] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.044448] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.044451] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.047324] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.047328] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.049345] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.049558] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.049705] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.049708] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.052662] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.052666] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.054961] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.055189] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.055375] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.055377] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.058074] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.058078] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.060396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.060612] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.060760] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.060762] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.063442] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.063445] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.065416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.065641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.065799] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.065801] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.068452] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.068456] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.070435] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.070662] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.070820] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.070822] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.073462] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.073466] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.075404] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.075628] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.075785] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.075788] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.078344] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.078348] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.080344] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.080568] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.080725] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.080727] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.083397] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.083400] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.085383] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.085608] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.085766] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.085768] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.088796] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.088800] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.091057] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.091283] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.091479] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.091481] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.094184] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.094188] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.096363] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.096590] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.096748] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.096750] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.099446] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.099449] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.101427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.101652] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.101810] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.101812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.104456] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.104460] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.106474] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.106698] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.106856] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.106858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.109476] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.109480] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.111708] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.111930] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.112088] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.112090] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.114882] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.114886] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.117029] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.117254] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.117491] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.117493] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.120236] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.120240] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.122454] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.122704] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.122863] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.122865] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.125754] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.125758] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.128042] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.128269] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.128443] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.128447] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.131203] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.131206] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.133395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.133654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.133803] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.133805] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.136523] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.136528] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.138792] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.139021] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.139177] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.139180] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.142182] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.142186] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.144380] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.144595] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.144743] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.144745] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.147621] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.147626] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.149945] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.150170] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.150328] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.150330] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.153276] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.153279] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.155733] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.155960] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.156116] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.156118] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.159166] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.159170] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.161346] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.161566] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.161715] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.161717] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.164347] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.164351] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.166379] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.166594] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.166743] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.166745] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.169394] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.169398] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.171402] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.171616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.171763] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.171765] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.174448] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.174452] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.176410] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.176625] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.176774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.176776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.179820] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.179823] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.182078] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.182305] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.182505] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.182507] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.185158] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.185162] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.187394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.187611] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.187760] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.187762] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.190437] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.190441] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.192409] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.192622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.192770] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.192772] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.195479] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.195483] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.197699] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.197928] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.198090] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.198092] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.200813] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.200816] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.203053] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.203281] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.203452] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.203454] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.206174] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.206177] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.207908] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.208122] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.208269] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.208271] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.210971] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.210974] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.213271] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.213532] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.213680] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.213682] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.216329] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.216344] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.218397] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.218621] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.218771] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.218773] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.221398] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.221402] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.223445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.223672] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.223830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.223832] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.226416] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.226419] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.228445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.228671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.228828] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.228830] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.231447] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.231450] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.233393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.233617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.233774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.233776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.236382] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.236385] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.238410] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.238636] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.238792] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.238794] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.241413] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.241416] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.243400] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.243624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.243781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.243783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.246392] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.246396] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.248422] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.248648] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.248805] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.248807] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.252510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.252514] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.254845] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.255061] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.255208] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.255210] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.258692] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.258696] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.260934] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.261149] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.261297] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.261299] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.264720] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.264724] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.266941] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.267161] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.267308] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.267310] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.270622] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.270625] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.272843] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.273056] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.273204] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.273206] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.276589] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.276592] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.278804] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.279018] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.279164] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.279166] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.282496] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.282502] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.284943] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.285235] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.285499] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.285503] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.288396] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.288400] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.290430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.290664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.290821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.290823] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.293525] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.293529] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.295737] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.295951] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.296098] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.296100] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.299396] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.299399] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.301363] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.301578] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.301725] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.301727] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.304987] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.304990] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.307264] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.307517] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.307665] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.307667] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.308132] igt_reset_nop: 94 resets

<6> [271.334514] i915: Running intel_hangcheck_live_selftests/igt_reset_nop_engine

<6> [271.835816] igt_reset_nop_engine(rcs0): 873 resets

<6> [272.336732] igt_reset_nop_engine(bcs0): 1147 resets

<6> [272.837860] igt_reset_nop_engine(vcs0): 1083 resets

<6> [273.338808] igt_reset_nop_engine(vecs0): 1160 resets

<6> [273.354493] i915: Running intel_hangcheck_live_selftests/igt_reset_idle_engine

<6> [273.855512] rcs0: Completed 4187 idle resets

<6> [274.356407] bcs0: Completed 5733 idle resets

<6> [274.857458] vcs0: Completed 5744 idle resets

<6> [275.358462] vecs0: Completed 5911 idle resets

<6> [275.358492] i915: Running intel_hangcheck_live_selftests/igt_reset_active_engine

<6> [275.859769] rcs0: Completed 1018 active resets

<6> [276.360501] bcs0: Completed 1371 active resets

<6> [276.861658] vcs0: Completed 1365 active resets

<6> [277.362357] vecs0: Completed 1381 active resets

<6> [277.390569] i915: Running intel_hangcheck_live_selftests/igt_reset_fail_engine

<6> [277.891570] igt_reset_fail_engine(rcs0): 1644 resets

<6> [278.392655] igt_reset_fail_engine(bcs0): 1695 resets

<6> [278.893480] igt_reset_fail_engine(vcs0): 1705 resets

<6> [279.394455] igt_reset_fail_engine(vecs0): 1736 resets

<6> [279.409507] i915: Running intel_hangcheck_live_selftests/igt_reset_engines

<6> [279.910406] i915_reset_engine(rcs0:idle): 2341 resets

<6> [280.411482] i915_reset_engine(bcs0:idle): 3513 resets

<6> [280.912393] i915_reset_engine(vcs0:idle): 3573 resets

<6> [281.413407] i915_reset_engine(vecs0:idle): 3452 resets

<6> [281.914680] i915_reset_engine(rcs0:active): 894 resets

<6> [282.415701] i915_reset_engine(bcs0:active): 1233 resets

<6> [282.916390] i915_reset_engine(vcs0:active): 1238 resets

<6> [283.417575] i915_reset_engine(vecs0:active): 1243 resets

<6> [283.918342] i915_reset_engine(rcs0:others-idle): 4404 resets

<6> [284.419368] i915_reset_engine(bcs0:others-idle): 5766 resets

<6> [284.920394] i915_reset_engine(vcs0:others-idle): 5771 resets

<6> [285.422363] i915_reset_engine(vecs0:others-idle): 5878 resets

<6> [285.924338] i915_reset_engine(rcs0:others-active): 891 resets

<6> [286.425570] i915_reset_engine(bcs0:others-active): 1201 resets

<6> [286.927364] i915_reset_engine(vcs0:others-active): 1019 resets

<6> [287.429506] i915_reset_engine(vecs0:others-active): 1007 resets

<6> [287.931346] i915_reset_engine(rcs0:others-priority): 888 resets

<6> [288.433588] i915_reset_engine(bcs0:others-priority): 1110 resets

<6> [288.935374] i915_reset_engine(vcs0:others-priority): 1155 resets

<6> [289.436371] i915_reset_engine(vecs0:others-priority): 1106 resets

<6> [289.938436] i915_reset_engine(rcs0:self-priority): 1009 resets

<6> [290.439511] i915_reset_engine(bcs0:self-priority): 1206 resets

<6> [290.940455] i915_reset_engine(vcs0:self-priority): 1229 resets

<6> [291.441640] i915_reset_engine(vecs0:self-priority): 1203 resets

<6> [291.478436] i915: Running intel_hangcheck_live_selftests/igt_reset_engines_atomic

<7> [291.478445] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [291.479729] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.479733] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.485430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.485748] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.485907] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.485909] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [291.501433] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [291.502084] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.502089] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.508465] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.508786] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.508954] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.508956] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.537520] i915: Running intel_hangcheck_live_selftests/igt_reset_queue

<6> [291.540381] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.540389] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.543063] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.543585] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.543927] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.543932] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.545574] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.545581] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.548423] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.548864] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.549227] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.549231] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.550309] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.550316] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.553047] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.553538] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.553881] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.553886] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.554980] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.554987] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.557854] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.558302] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.558688] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.558693] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.559807] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.559815] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.562418] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.562835] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.563175] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.563180] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.564269] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.564277] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.567020] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.567489] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.567815] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.567841] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.568929] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.568937] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.571414] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.571792] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.572079] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.572083] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.573031] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.573037] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.575360] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.575737] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.576024] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.576028] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.576918] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.576923] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.579324] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.579683] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.579918] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.579921] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.580765] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.580771] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.583355] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.583717] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.583921] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.583924] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.584685] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.584690] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.590444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.590818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.591034] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.591037] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.591801] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.591806] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.594082] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.594393] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.594598] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.594601] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.595358] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.595363] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.597415] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.597707] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.597924] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.597927] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.598693] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.598698] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.601085] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.601399] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.601604] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.601607] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.602366] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.602371] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.604417] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.604710] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.604927] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.604930] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.605703] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.605708] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.608102] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.608466] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.608673] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.608676] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.609444] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.609449] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.611423] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.611718] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.611935] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.611938] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.612980] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.612985] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.615356] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.615637] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.615841] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.615844] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.616646] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.616650] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.619040] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.619352] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.619571] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.619574] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.620320] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.620325] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.622418] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.622714] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.622932] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.622935] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.623703] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.623708] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.626052] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.626379] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.626586] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.626589] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.627346] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.627350] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.629422] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.629714] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.629932] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.629935] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.630701] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.630705] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.633048] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.633364] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.633570] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.633573] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.634313] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.634318] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.636384] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.636664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.636868] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.636871] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.637642] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.637647] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.639965] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.640261] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.640500] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.640503] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.641241] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.641246] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.643361] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.643690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.643895] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.643898] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.644666] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.644670] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.647017] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.647378] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.647584] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.647587] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.648326] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.648346] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.650366] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.650759] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.651015] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.651018] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.651782] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.651786] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.654071] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.654515] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.654814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.654819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.655628] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.655633] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.658009] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.658359] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.658655] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.658659] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.659577] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.659582] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.661966] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.662325] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.662683] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.662688] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.663541] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.663546] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.665925] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.666298] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.666642] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.666647] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.667479] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.667484] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.669843] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.670230] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.670540] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.670545] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.671472] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.671477] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.673829] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.674120] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.674362] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.674365] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.675422] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.675427] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.677783] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.678076] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.678655] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.678661] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.679530] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.679534] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.681874] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.682236] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.682562] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.682567] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.683411] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.683416] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.685762] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1100MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.686128] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.686474] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.686479] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.687311] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.687315] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.689424] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.689721] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.690009] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.690014] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.691091] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.691096] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.693412] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.693703] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.693919] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.693921] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.694968] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.694973] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.697323] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.697664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.697879] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.697882] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.698928] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.698933] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.701292] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.701639] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.701875] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.701880] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.702916] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.702921] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.706365] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.706751] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.706953] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.706955] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.707708] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.707713] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.710078] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.710460] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.710673] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.710676] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.711425] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.711430] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.713696] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.714086] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.714419] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.714424] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.715166] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.715171] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.717394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.717786] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.718080] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.718084] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.718956] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.718961] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.721316] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.721764] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.722064] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.722069] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.722883] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.722888] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.725262] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.725688] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.725984] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.725988] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.726914] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.726919] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.729306] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1000MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.729654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.729948] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.729953] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.730927] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.730931] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.733457] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.733865] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.734156] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.734160] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.735005] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.735010] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.740445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.740817] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.741031] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.741033] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.741937] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.741943] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.744289] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.744577] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.744780] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.744783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.745707] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.745714] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.748093] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.748402] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.748618] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.748621] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.749614] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.749620] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.752001] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.752293] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.752522] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.752525] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.753328] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.753348] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.755754] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.756046] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.756263] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.756265] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.757091] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.757098] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.759414] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.759705] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.759921] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.759923] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.760701] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.760708] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.763028] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.763321] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.763585] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.763588] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.764341] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.764346] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.766987] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.767284] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.767543] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.767546] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.768289] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.768294] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.771424] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.771798] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.772011] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.772014] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.772891] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.772897] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.778449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.778822] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.779037] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.779040] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.780070] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.780075] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.782413] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.782705] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.782922] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.782927] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.784002] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.784007] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.786353] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.786644] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.786877] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.786882] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.787939] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.787946] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.790289] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.790591] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.790807] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.790810] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.791723] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.791730] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.794050] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.794394] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.794611] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.794614] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.795540] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.795547] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.797965] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.798258] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.798519] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.798522] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.799550] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.799556] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.801919] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.802202] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.802449] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.802452] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.803494] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.803499] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.809447] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.809818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.810034] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.810037] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.811084] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.811091] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.813393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.813687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.813904] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.813907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.814695] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.814701] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.817043] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.817351] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.817569] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.817572] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.818326] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.818355] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.820346] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.820641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.820860] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.820863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.821635] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.821640] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.824015] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.824313] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.824550] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.824553] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.825293] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.825298] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.827415] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.827710] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.827928] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.827931] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.828702] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.828706] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.831028] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.831328] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.831561] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.831564] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.832312] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.832317] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.835390] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.835765] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.835980] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.835983] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.836753] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.836758] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.842438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.842814] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.843029] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.843032] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.843791] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.843796] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.846104] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.846414] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.846623] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.846626] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.847390] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.847395] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.849396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.849675] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.849880] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.849883] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.850659] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.850664] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.853023] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.853316] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.853555] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.853558] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.854310] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.854315] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.856419] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.856714] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.856931] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.856934] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.857707] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.857712] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.860110] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.860442] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.860650] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.860652] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.861412] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.861417] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.863389] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.863667] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.863869] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.863872] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.864637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.864642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.866999] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.867297] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.867535] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.867539] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.868281] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.868286] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.870399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.870692] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.870909] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.870912] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.871688] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.871693] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.874040] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.874355] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.874562] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.874565] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.875306] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.875311] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.877397] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.877697] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.877917] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.877920] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.878688] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.878692] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.881029] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.881321] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.881555] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.881558] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.882299] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.882304] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.884398] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.884678] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.884882] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.884885] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.885658] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.885662] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.887994] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.888286] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.888526] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.888529] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.889270] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.889274] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.891406] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.892455] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.893276] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.893288] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.895790] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.895809] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.899057] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.900076] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.900981] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.900994] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.902884] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.902897] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.906108] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.906754] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.907179] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.907185] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.908555] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.908564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.911440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.911857] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.912180] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.912201] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.913328] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.913356] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.916105] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.916553] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.916841] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.916845] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.917818] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.917824] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.920355] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.920717] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.921008] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.921012] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.921946] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.921951] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.924420] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.924752] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.925000] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.925003] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.925877] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.925883] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.928317] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.928619] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.928837] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.928840] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.929639] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.929644] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.932028] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.932293] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.932499] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.932502] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.933207] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.933211] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.935431] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.935696] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.935889] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.935892] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.936613] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.936617] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.938949] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.939213] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.939424] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.939427] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.940133] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.940137] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.942386] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.942639] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.942821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.942823] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.943542] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.943546] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.945819] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.946085] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.946279] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.946281] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.946998] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.947002] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.949325] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.949605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.949786] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.949789] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.950499] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.950503] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.952777] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.953040] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.953234] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.953236] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.953955] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.953959] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.956260] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.956542] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.956724] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.956727] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.957439] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.957443] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.959426] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.959690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.959883] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.959885] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.960609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.960613] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.962951] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.963223] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.963436] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.963439] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.964142] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.964147] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.966392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.966642] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.966824] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.966826] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.967566] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.967570] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.969805] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.970057] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.970238] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.970241] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.970954] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.970958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.973203] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.973483] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.973665] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.973668] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.974386] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.974390] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.976396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.976649] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.976831] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.976834] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.977558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.977562] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.979810] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.980075] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.980270] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.980272] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.980994] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.980998] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.983292] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.983569] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.983751] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.983754] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.984468] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.984472] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.986770] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.987850] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.988784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.988798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.991321] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.991386] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.995387] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.996449] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.997025] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.997033] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.998903] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.998916] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.002077] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.002643] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.003048] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.003071] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.004483] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.004493] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.007417] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.007858] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.008201] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.008223] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.009378] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.009386] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.012119] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.012528] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.012817] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.012821] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.013792] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.013798] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.016312] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.016689] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.016927] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.016930] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.017799] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.017805] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.020214] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.020563] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.020797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.020800] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.021672] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.021677] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.024087] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.024405] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.024611] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.024614] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.025395] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.025400] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.027807] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.028072] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.028265] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.028268] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.028984] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.028988] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.031287] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.031561] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.031742] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.031745] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.032458] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.032462] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.034730] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.034995] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.035188] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.035191] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.035907] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.035911] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.038119] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.038406] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.038589] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.038592] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.038788] rcs0: Completed 123 queued resets

<6> [292.040169] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.040173] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.042407] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.042660] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.042842] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.042845] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.043589] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.043593] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.045935] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.046203] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.046415] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.046418] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.047156] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.047160] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.049391] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.049661] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.049855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.049858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.050614] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.050619] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.052890] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.053154] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.053368] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.053371] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.054107] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.054111] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.056427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.056689] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.056871] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.056874] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.057625] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.057629] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.060001] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.060272] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.060486] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.060489] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.061224] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.061228] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.063421] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.063685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.063881] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.063884] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.064626] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.064630] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.066928] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.067193] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.067407] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.067410] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.068144] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.068148] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.070386] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.070638] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.070820] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.070822] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.071577] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.071582] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.073840] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.074106] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.074300] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.074302] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.075048] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.075052] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.077320] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.077591] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.077773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.077775] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.078519] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.078523] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.080758] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.081023] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.081217] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.081220] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.081954] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.081958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.084198] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.084480] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.084663] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.084665] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.085406] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.085410] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.087396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.087646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.087828] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.087831] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.088605] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.088610] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.090892] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.091156] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.091371] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.091374] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.092121] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.092125] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.094371] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.094624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.094806] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.094809] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.095563] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.095567] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.097884] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.098150] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.098361] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.098364] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.099113] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.099117] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.101410] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.101703] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.101885] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.101888] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.102666] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.102670] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.108419] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.108753] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.108932] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.108935] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.109699] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.109703] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.112052] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.112315] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.112527] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.112530] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.113267] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.113271] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.115429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.115694] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.115888] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.115890] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.116661] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.116665] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.118904] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.119157] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.119362] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.119365] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.120095] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.120099] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.122387] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.122639] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.122820] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.122822] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.123560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.123565] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.125786] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.126037] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.126217] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.126220] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.126956] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.126960] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.129238] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.129517] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.129701] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.129704] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.130456] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.130460] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.132720] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.132969] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.133150] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.133152] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.133886] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.133890] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.136112] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.136393] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.136587] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.136590] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.137329] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.137340] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.139400] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.139664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.139857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.139860] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.140591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.140595] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.142872] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.143127] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.143309] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.143312] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.144055] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.144059] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.146308] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.146623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.146818] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.146821] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.147565] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.147569] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.149828] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.150170] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.150374] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.150377] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.151102] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.151106] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.153324] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.153597] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.153790] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.153792] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.154536] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.154540] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.156784] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.157049] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.157243] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.157245] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.157976] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.157980] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.160284] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.160559] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.160753] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.160755] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.161494] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.161498] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.163752] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.164016] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.164211] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.164214] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.164947] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.164951] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.167197] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.167469] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.167663] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.167665] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.168417] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.168421] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.170421] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.170684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.170878] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.170881] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.171613] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.171617] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.173886] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.174135] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.174316] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.174318] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.175064] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.175069] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.177342] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.177608] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.177802] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.177804] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.178540] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.178545] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.180852] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.181116] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.181309] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.181312] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.182059] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.182063] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.184305] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.184579] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.184774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.184777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.185522] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.185526] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.187841] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.188105] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.188299] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.188301] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.189048] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.189052] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.191344] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.191615] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.191809] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.191811] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.192551] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.192555] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.194869] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.195135] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.195328] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.195343] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.196072] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.196076] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.198351] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.198615] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.198808] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.198811] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.199558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.199563] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.201847] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.202114] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.202307] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.202309] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.203056] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.203060] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.205317] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.205591] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.205784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.205787] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.206532] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.206536] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.208797] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.209061] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.209254] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.209257] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.210004] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.210009] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.212277] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.212552] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.212746] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.212749] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.213484] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.213488] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.215716] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.215981] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.216176] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.216179] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.216912] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.216916] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.219024] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.219289] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.219492] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.219495] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.220228] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.220232] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.222387] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.222651] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.222844] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.222847] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.223611] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.223615] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.225935] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.226199] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.226404] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.226407] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.227139] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.227143] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.229382] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.229649] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.229842] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.229844] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.230583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.230587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.232899] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.233149] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.233344] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.233347] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.234072] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.234076] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.236367] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.236632] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.236826] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.236828] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.237618] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.237622] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.239969] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.240234] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.240440] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.240442] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.241183] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.241187] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.243421] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.243686] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.243881] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.243884] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.244638] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.244642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.246991] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.247256] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.247463] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.247466] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.248201] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.248205] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.250421] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.250696] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.250888] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.250891] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.251663] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.251668] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.255391] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.255739] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.255930] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.255933] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.256685] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.256689] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.258990] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.259254] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.259462] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.259465] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.260206] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.260210] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.262389] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.262652] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.262846] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.262848] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.263600] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.263604] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.265882] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.266146] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.266353] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.266356] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.267091] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.267096] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.269383] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.269648] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.269842] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.269845] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.270620] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.270624] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.272867] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.273117] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.273298] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.273301] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.274044] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.274048] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.276305] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.276579] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.276773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.276775] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.277537] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.277541] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.279844] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.280108] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.280301] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.280303] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.281048] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.281052] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.283338] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.283603] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.283796] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.283799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.284543] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.284548] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.286817] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.287080] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.287274] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.287276] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.288020] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.288024] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.290281] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.290558] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.290751] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.290754] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.291510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.291515] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.293782] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.294046] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.294240] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.294243] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.295008] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.295012] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.297296] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.297569] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.297762] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.297764] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.298525] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.298530] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.300431] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.300695] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.300888] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.300891] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.301653] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.301657] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.303948] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.304211] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.304418] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.304421] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.305162] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.305166] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.307362] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.307627] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.307821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.307823] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.308594] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.308598] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.310859] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.311126] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.311320] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.311322] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.312066] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.312070] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.314363] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.314625] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.314819] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.314821] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.315582] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.315586] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.317872] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.318123] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.318304] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.318307] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.319051] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.319055] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.321352] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.321617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.321810] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.321813] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.322560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.322564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.324859] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.325124] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.325317] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.325320] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.326065] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.326069] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.328363] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.328626] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.328821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.328824] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.329583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.329587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.331884] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.332149] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.332356] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.332359] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.333097] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.333101] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.335428] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.335679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.335860] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.335863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.336633] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.336638] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.338985] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.339250] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.339457] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.339460] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.340193] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.340197] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.342421] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.342686] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.342879] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.342882] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.343646] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.343650] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.345977] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.346241] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.346448] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.346451] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.347182] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.347187] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.349393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.349657] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.349851] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.349854] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.350626] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.350630] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.353004] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.353270] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.353479] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.353482] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.354225] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.354229] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.356430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.356700] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.356893] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.356895] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.357678] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.357682] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.359988] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.360251] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.360460] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.360463] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.361210] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.361214] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.363399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.363664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.363860] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.363863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.364643] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.364647] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.366966] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.367232] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.367441] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.367444] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.368193] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.368197] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.370427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.370695] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.370890] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.370892] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.371674] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.371678] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.374016] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.374286] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.374493] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.374496] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.375239] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.375243] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.377429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.377694] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.377887] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.377890] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.378680] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.378684] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.381029] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.381295] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.381502] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.381505] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.382251] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.382256] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.384405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.384666] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.384846] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.384849] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.385643] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.385648] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.388161] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.388520] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.388711] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.388714] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.389479] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.389484] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.394446] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.394789] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.394980] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.394983] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.395757] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.395761] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.398104] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.398382] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.398593] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.398596] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.399351] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.399355] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.401426] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.401691] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.401885] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.401887] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.402682] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.402686] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.404987] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.405251] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.405460] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.405463] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.406215] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.406219] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.408391] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.408657] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.408851] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.408854] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.409631] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.409635] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.412013] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.412287] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.412494] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.412497] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.413241] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.413245] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.415428] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.415702] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.415896] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.415899] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.416668] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.416672] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.419166] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.419521] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.419714] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.419717] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.420460] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.420464] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.425449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.425794] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.425986] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.425989] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.426736] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.426741] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.429109] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.429391] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.429603] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.429606] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.430351] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.430355] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.432399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.432654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.432835] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.432838] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.433604] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.433608] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.435963] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.436229] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.436434] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.436437] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.437191] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.437196] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.439428] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.439680] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.439862] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.439865] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.440634] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.440638] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.443012] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.443276] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.443480] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.443483] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.444229] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.444233] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.446430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.446683] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.446865] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.446867] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.447642] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.447647] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.450018] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.450288] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.450490] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.450493] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.451234] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.451238] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.453424] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.453674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.453855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.453858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.454583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.454587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.456860] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.457112] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.457294] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.457297] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.458060] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.458064] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.460315] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.460581] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.460762] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.460764] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.461494] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.461499] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.463735] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.464000] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.464193] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.464195] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.464926] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.464930] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.467026] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.467292] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.467497] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.467499] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.468233] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.468237] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.470397] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.470649] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.470832] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.470835] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.471587] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.471591] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.473898] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.474162] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.474378] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.474381] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.475119] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.475123] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.477381] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.477642] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.477823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.477825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.478563] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.478567] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.482230] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.482584] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.482763] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.482766] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.483493] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.483497] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.485754] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.486018] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.486211] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.486214] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.486944] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.486949] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.489197] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.489475] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.489657] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.489660] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.490407] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.490411] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.492396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.492649] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.492830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.492833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.493566] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.493571] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.495897] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.496160] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.496423] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.496427] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.497394] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.497399] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.499429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.499682] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.499864] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.499866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.500825] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.500831] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.503122] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.503443] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.503626] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.503628] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.504390] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.504396] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.506396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.506646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.506827] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.506830] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.507568] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.507572] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.510107] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.510399] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.510583] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.510585] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.511323] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.511327] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.513421] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.513675] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.513861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.513864] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.514596] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.514600] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.516875] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.517127] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.517308] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.517311] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.518058] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.518063] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.520364] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.520619] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.520800] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.520803] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.521548] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.521552] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.523832] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.524085] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.524266] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.524268] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.525017] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.525021] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.527308] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.527578] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.527760] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.527763] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.528540] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.528545] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.530852] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.531116] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.531310] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.531313] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.532057] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.532061] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.534357] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.534622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.534815] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.534818] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.535562] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.535566] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.537849] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.538101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.538284] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.538287] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.539029] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.539033] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.541356] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.541621] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.541814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.541817] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.541997] bcs0: Completed 141 queued resets

<6> [292.543478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.543482] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.545771] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.546034] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.546226] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.546228] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.547032] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.547036] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.549319] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.549618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.549799] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.549802] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.550597] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.550601] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.552923] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.553189] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.553422] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.553425] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.554204] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.554209] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.556349] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.556600] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.556779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.556781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.557591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.557595] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.559882] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.560175] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.560399] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.560404] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.561202] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.561206] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.563346] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.563596] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.563776] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.563779] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.564581] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.564585] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.566806] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.567054] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.567233] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.567236] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.568030] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.568034] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.570281] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.570548] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.570729] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.570732] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.571526] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.571530] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.573774] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.574052] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.574233] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.574236] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.575035] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.575039] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.577282] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.577582] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.577764] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.577766] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.578565] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.578570] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.580813] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.581064] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.581244] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.581247] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.582052] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.582057] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.584357] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.584607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.584787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.584790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.585590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.585594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.587948] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.588212] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.588428] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.588430] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.589214] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.589219] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.591349] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.591602] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.591781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.591784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.592599] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.592603] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.594887] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.595150] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.595371] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.595373] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.596155] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.596159] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.598395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.598674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.598855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.598858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.599670] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.599675] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.601977] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.602238] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.602463] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.602466] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.603245] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.603250] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.605418] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.605669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.605849] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.605852] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.606660] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.606664] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.608951] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.609213] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.609449] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.609452] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.610235] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.610239] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.612425] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.612693] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.612874] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.612877] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.613687] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.613691] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.616001] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.616263] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.616476] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.616479] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.617262] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.617266] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.619424] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.619674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.619857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.619859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.620670] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.620674] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.622969] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.623231] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.623446] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.623449] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.624231] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.624235] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.626424] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.626675] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.626856] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.626859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.627672] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.627676] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.630007] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.630269] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.630479] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.630481] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.631405] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.631410] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.633346] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.633614] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.633808] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.633810] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.634553] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.634557] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.636849] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.637117] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.637309] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.637312] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.638058] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.638062] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.640362] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.640627] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.640820] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.640823] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.641557] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.641561] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.643910] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.644178] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.644382] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.644385] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.645124] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.645129] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.647394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.647659] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.647854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.647856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.648588] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.648593] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.650894] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.651159] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.651370] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.651373] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.652122] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.652126] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.654407] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.654672] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.654864] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.654867] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.655627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.655631] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.658004] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.658268] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.658486] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.658489] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.659225] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.659229] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.661386] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.661651] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.661843] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.661846] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.662575] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.662579] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.664855] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.665104] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.665283] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.665285] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.666048] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.666052] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.668324] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.668600] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.668792] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.668794] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.669676] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.669682] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.672086] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.672377] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.672570] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.672573] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.673327] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.673345] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.675390] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.675655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.675849] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.675852] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.676586] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.676590] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.678917] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.679183] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.679391] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.679394] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.680134] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.680139] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.682359] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.682624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.682817] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.682819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.683566] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.683570] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.685888] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.686139] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.686320] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.686323] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.687068] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.687072] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.689352] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.689618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.689810] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.689813] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.690555] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.690559] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.692877] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.693128] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.693309] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.693311] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.694059] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.694063] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.696349] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.696614] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.696809] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.696812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.697550] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.697554] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.699861] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.700127] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.700320] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.700323] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.701071] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.701075] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.703320] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.703595] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.703789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.703791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.704527] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.704531] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.706829] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.707094] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.707287] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.707290] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.708035] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.708039] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.710279] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.710555] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.710750] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.710752] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.711485] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.711490] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.713742] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.714010] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.714203] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.714206] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.714944] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.714948] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.717185] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.717473] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.717667] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.717669] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.718412] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.718416] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.720385] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.720650] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.720844] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.720846] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.721587] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.721592] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.723817] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.724067] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.724248] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.724251] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.724994] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.724998] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.727293] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.727567] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.727760] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.727763] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.728498] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.728502] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.730754] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.731018] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.731212] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.731215] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.731946] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.731950] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.734204] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.734490] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.734685] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.734688] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.735424] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.735429] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.737392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.737656] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.737849] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.737852] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.738593] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.738597] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.740826] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.741077] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.741257] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.741260] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.742001] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.742005] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.744273] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.744546] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.744740] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.744743] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.745481] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.745485] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.747342] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.747605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.747797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.747799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.748541] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.748546] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.750836] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.751102] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.751295] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.751297] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.752039] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.752043] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.754280] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.754554] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.754750] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.754753] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.755485] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.755489] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.757766] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.758032] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.758226] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.758228] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.758962] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.758966] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.761236] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.761510] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.761703] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.761706] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.762452] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.762456] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.764391] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.764657] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.764852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.764854] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.765590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.765594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.767824] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.768073] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.768255] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.768257] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.769005] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.769009] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.771291] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.771561] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.771755] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.771757] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.772486] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.772491] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.774732] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.774996] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.775190] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.775193] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.775924] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.775929] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.778043] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.778306] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.778513] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.778516] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.779268] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.779272] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.781384] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.781647] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.781841] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.781843] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.782591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.782595] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.784825] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.785076] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.785257] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.785259] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.786012] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.786016] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.788281] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.788554] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.788748] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.788751] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.789488] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.789493] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.791759] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.792023] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.792216] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.792219] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.792951] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.792955] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.795231] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.795502] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.795697] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.795700] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.796441] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.796445] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.798394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.798660] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.798854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.798856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.799590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.799594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.801825] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.802076] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.802260] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.802262] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.803000] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.803004] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.805276] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.805546] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.805740] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.805742] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.806480] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.806484] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.808345] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.808608] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.808801] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.808804] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.809549] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.809553] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.811811] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.812074] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.812268] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.812270] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.813017] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.813022] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.815295] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.815567] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.815761] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.815764] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.816512] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.816517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.818763] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.819028] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.819221] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.819224] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.819956] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.819960] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.822255] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.822530] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.822724] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.822727] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.823468] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.823472] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.825343] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.825605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.825797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.825800] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.826548] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.826552] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.828848] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.829112] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.829304] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.829307] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.830056] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.830060] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.832306] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.832582] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.832777] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.832779] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.833519] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.833523] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.835794] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.836057] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.836250] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.836253] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.836996] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.837000] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.839294] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.839567] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.839761] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.839763] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.840496] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.840500] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.842774] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.843040] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.843232] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.843235] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.843962] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.843967] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.846271] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.846545] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.846738] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.846741] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.847478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.847482] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.849342] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.849604] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.849795] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.849798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.850543] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.850547] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.852785] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.853048] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.853242] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.853244] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.853976] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.853980] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.856278] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.856553] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.856748] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.856751] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.857484] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.857488] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.859704] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.859968] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.860162] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.860165] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.860896] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.860900] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.863025] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.863291] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.863497] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.863500] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.864235] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.864239] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.866387] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.866650] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.866845] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.866847] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.867581] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.867586] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.869895] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.870148] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.870329] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.870342] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.871067] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.871072] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.873349] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.873612] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.873806] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.873809] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.874552] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.874556] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.876832] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.877095] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.877289] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.877292] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.878034] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.878038] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.880309] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.880584] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.880779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.880781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.881528] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.881532] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.883818] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.884084] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.884277] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.884279] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.885037] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.885042] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.887343] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.887607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.887800] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.887803] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.888549] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.888554] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.890836] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.891101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.891294] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.891296] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.892043] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.892047] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.894319] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.894590] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.894784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.894786] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.895535] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.895539] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.897872] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.898136] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.898349] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.898352] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.899081] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.899086] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.901326] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.901602] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.901796] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.901798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.902546] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.902550] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.904879] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.905145] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.905351] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.905354] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.906088] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.906092] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.908384] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.908648] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.908841] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.908843] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.909592] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.909596] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.911886] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.912136] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.912317] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.912319] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.913067] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.913071] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.915386] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.915653] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.915847] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.915850] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.916585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.916589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.918898] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.919153] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.919344] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.919347] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.920079] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.920083] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.922378] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.922641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.922833] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.922836] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.923589] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.923593] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.925891] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.926155] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.926360] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.926363] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.927101] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.927105] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.929364] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.929629] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.929823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.929826] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.930568] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.930572] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.932834] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.933105] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.933298] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.933300] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.934104] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.934108] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.936369] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.936631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.936823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.936825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.937560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.937564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.939789] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.940051] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.940244] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.940246] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.940981] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.940985] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.943202] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.943475] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.943667] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.943669] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.944410] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.944414] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.946392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.946656] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.946848] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.946850] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.947582] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.947587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.949853] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.950115] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.950307] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.950310] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.951057] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.951061] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.953325] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.953595] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.953789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.953792] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.954534] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.954538] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.956834] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.957096] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.957288] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.957291] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.958043] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.958047] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.960327] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.960602] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.960797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.960799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.961546] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.961550] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.963820] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.964083] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.964275] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.964277] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.965021] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.965025] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.967354] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.967617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.967808] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.967811] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.968547] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.968552] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.970814] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.971077] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.971269] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.971272] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.972015] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.972019] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.974276] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.974552] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.974744] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.974747] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.975478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.975482] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.977717] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.977979] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.978171] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.978174] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.978904] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.978908] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.981070] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.981346] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.981539] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.981541] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.982274] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.982278] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.984388] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.984641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.984821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.984823] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.985560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.985565] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.987869] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.988120] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.988300] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.988302] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.989046] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.989051] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.991325] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.991598] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.991791] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.991793] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.992535] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.992539] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.994795] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.995058] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.995250] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.995253] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.995996] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.996000] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.998317] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.998592] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.998784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.998787] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.999527] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.999531] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.001792] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.002056] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.002248] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.002251] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.002992] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.002996] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.005258] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.005531] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.005722] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.005725] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.006465] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.006470] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.008346] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.008594] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.008774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.008776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.009513] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.009517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.011740] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.012004] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.012195] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.012198] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.012928] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.012932] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.015027] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.015291] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.015495] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.015497] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.016230] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.016234] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.018390] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.018657] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.018850] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.018853] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.019591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.019595] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.021870] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.022126] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.022307] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.022309] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.023053] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.023057] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.025296] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.025570] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.025762] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.025765] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.026497] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.026501] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.028754] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.029017] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.029209] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.029211] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.029942] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.029946] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.032211] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.032485] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.032679] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.032681] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.033428] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.033432] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.035422] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.035684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.035876] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.035879] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.036617] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.036621] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.038943] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.039206] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.039410] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.039413] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.040144] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.040148] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.042406] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.042669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.042861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.042863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.043043] vcs0: Completed 145 queued resets

<6> [293.044396] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.044401] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.046429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.046695] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.046887] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.046889] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.047626] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.047631] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.049959] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.050224] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.050442] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.050445] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.051186] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.051190] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.053419] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.053684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.053876] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.053879] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.054613] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.054617] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.056942] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.057205] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.057431] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.057434] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.058163] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.058168] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.060400] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.060663] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.060855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.060858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.061596] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.061600] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.063915] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.064179] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.064404] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.064407] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.065150] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.065155] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.067413] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.067677] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.067869] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.067871] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.068612] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.068616] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.070952] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.071218] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.071445] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.071448] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.072176] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.072180] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.074422] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.074685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.074875] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.074878] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.075627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.075631] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.077966] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.078231] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.078456] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.078459] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.079193] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.079197] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.081400] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.081666] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.081857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.081860] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.082594] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.082598] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.084911] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.085173] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.085410] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.085413] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.086147] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.086152] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.088400] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.088664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.088855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.088858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.089591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.089595] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.091908] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.092170] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.092402] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.092405] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.093134] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.093138] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.095400] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.095662] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.095856] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.095858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.096597] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.096601] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.098879] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.099141] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.099366] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.099369] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.100104] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.100108] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.102361] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.102624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.102817] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.102819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.103568] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.103573] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.105857] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.106105] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.106285] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.106287] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.107039] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.107043] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.109277] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.109549] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.109742] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.109744] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.110475] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.110479] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.112719] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.112981] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.113174] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.113176] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.113908] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.113912] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.116098] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.116386] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.116578] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.116581] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.117312] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.117316] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.119399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.119655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.119837] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.119839] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.120573] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.120577] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.122885] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.123148] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.123354] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.123357] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.124094] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.124098] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.126430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.126680] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.126862] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.126865] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.127614] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.127619] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.129900] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.130149] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.130345] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.130348] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.131076] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.131080] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.133365] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.133622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.133803] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.133806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.134545] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.134549] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.136850] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.137114] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.137308] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.137310] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.138063] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.138067] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.140348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.140599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.140780] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.140783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.141532] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.141536] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.143803] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.144068] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.144262] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.144264] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.145016] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.145020] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.147291] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.147560] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.147742] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.147744] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.148485] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.148490] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.150419] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.150670] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.150851] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.150854] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.151585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.151589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.153848] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.154099] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.154281] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.154283] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.155047] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.155051] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.157348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.157599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.157780] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.157783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.158527] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.158532] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.160861] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.161130] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.161323] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.161325] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.162079] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.162083] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.164427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.164679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.164861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.164863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.165617] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.165622] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.167927] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.168194] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.168404] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.168407] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.169145] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.169149] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.171397] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.171652] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.171834] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.171836] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.172585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.172589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.174856] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.175106] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.175287] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.175290] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.176038] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.176042] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.178295] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.178568] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.178749] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.178751] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.179489] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.179493] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.181759] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.182023] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.182217] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.182219] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.182954] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.182958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.185253] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.185522] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.185704] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.185707] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.186453] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.186458] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.188392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.188646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.188828] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.188830] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.189560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.189564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.191805] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.192070] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.192263] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.192266] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.193010] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.193014] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.195308] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.195571] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.195756] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.195758] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.196496] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.196501] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.198749] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.199015] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.199208] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.199211] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.199948] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.199953] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.202160] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.202433] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.202615] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.202618] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.203364] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.203368] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.205443] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.205696] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.205877] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.205880] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.206638] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.206642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.208953] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.209216] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.209425] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.209428] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.210162] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.210166] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.212385] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.212637] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.212819] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.212822] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.213579] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.213583] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.215902] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.216166] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.216374] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.216377] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.217110] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.217114] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.219371] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.219623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.219804] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.219807] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.220547] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.220551] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.222858] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.223122] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.223315] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.223317] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.224073] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.224077] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.226358] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.226609] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.226791] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.226793] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.227543] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.227547] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.229856] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.230120] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.230313] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.230316] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.231083] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.231088] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.233347] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.233598] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.233780] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.233783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.234527] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.234532] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.236854] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.237120] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.237316] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.237319] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.238069] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.238073] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.240386] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.240638] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.240820] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.240822] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.241556] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.241560] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.243850] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.244101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.244281] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.244284] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.244971] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.244975] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.247260] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.247533] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.247715] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.247718] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.248462] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.248467] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.250695] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.250946] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.251127] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.251130] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.251860] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.251864] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.254072] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.254362] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.254547] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.254549] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.255284] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.255288] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.257427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.257680] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.257861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.257863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.258595] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.258599] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.260862] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.261111] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.261291] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.261294] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.262050] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.262054] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.264299] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.264571] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.264753] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.264756] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.265488] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.265492] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.267720] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.267984] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.268179] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.268181] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.268913] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.268917] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.271127] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.271416] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.271599] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.271602] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.272343] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.272348] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.274349] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.274598] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.274779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.274781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.275525] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.275529] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.277775] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.278042] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.278235] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.278238] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.278971] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.278975] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.281279] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.281550] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.281733] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.281735] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.282469] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.282473] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.284716] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.284982] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.285177] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.285180] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.285911] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.285915] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.288062] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.288352] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.288535] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.288538] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.289266] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.289270] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.291444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.291714] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.291896] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.291898] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.292633] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.292637] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.294922] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.295187] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.295393] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.295396] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.296136] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.296140] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.298437] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.298688] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.298870] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.298873] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.299609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.299613] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.301960] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.302227] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.302433] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.302436] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.303167] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.303171] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.305382] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.305634] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.305816] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.305818] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.306560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.306564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.308871] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.309136] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.309328] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.309348] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.310077] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.310081] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.312393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.312646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.312827] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.312830] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.313564] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.313568] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.315955] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.316223] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.316430] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.316433] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.317170] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.317175] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.319437] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.319689] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.319870] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.319872] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.320628] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.320632] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.322890] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.323142] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.323323] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.323325] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.324085] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.324089] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.326381] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.326635] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.326817] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.326820] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.327572] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.327576] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.329845] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.330111] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.330303] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.330306] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.331058] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.331062] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.333349] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.333602] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.333784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.333787] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.334537] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.334541] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.336845] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.337111] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.337305] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.337308] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.338069] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.338073] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.340361] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.340615] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.340796] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.340799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.341549] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.341553] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.343840] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.344106] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.344298] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.344300] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.345061] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.345065] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.347348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.347600] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.347781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.347784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.348531] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.348535] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.350858] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.351123] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.351316] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.351318] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.352074] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.352078] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.354355] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.354607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.354788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.354791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.355535] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.355539] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.357777] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.358043] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.358236] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.358239] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.358980] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.358984] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.361286] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.361556] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.361737] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.361740] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.362473] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.362478] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.364420] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.364670] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.364850] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.364853] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.365594] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.365598] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.367830] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.368081] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.368263] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.368265] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.369022] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.369026] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.371271] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.371543] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.371724] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.371727] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.372472] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.372476] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.374354] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.374604] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.374785] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.374788] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.375534] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.375538] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.377808] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.378060] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.378241] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.378244] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.379005] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.379009] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.381280] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.381549] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.381731] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.381734] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.382471] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.382475] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.384709] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.384974] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.385167] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.385169] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.385915] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.385919] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.388029] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.388293] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.388498] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.388501] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.389248] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.389252] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.391399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.391653] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.391834] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.391837] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.392667] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.392671] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.394939] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.395206] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.395422] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.395425] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.396165] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.396169] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.398363] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.398616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.398797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.398800] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.399543] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.399547] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.401828] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.402079] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.402261] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.402263] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.403031] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.403036] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.405311] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.405577] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.405760] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.405762] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.406515] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.406520] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.408455] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.408707] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.408889] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.408891] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.409635] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.409639] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.411890] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.412141] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.412321] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.412324] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.413079] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.413083] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.415390] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.415641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.415822] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.415825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.416556] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.416560] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.418835] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.419100] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.419294] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.419296] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.420055] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.420059] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.422311] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.422581] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.422763] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.422766] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.423519] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.423523] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.425799] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.426062] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.426256] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.426259] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.427011] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.427016] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.429311] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.429577] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.429759] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.429761] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.430501] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.430506] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.432791] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.433056] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.433249] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.433251] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.434003] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.434007] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.436358] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.436610] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.436791] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.436794] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.437546] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.437550] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.439854] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.440119] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.440312] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.440315] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.441068] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.441072] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.443354] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.443607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.443788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.443791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.444543] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.444547] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.446860] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.447126] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.447319] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.447321] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.448076] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.448080] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.450356] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.450607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.450789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.450791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.451542] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.451546] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.453858] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.454125] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.454318] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.454321] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.455083] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.455087] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.457376] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.457629] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.457811] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.457813] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.458578] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.458583] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.460867] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.461119] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.461300] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.461303] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.462076] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.462080] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.464364] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.464615] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.464797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.464799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.465562] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.465566] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.467877] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.468128] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.468309] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.468311] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.469066] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.469070] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.471320] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.471588] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.471770] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.471773] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.472532] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.472536] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.474806] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.475059] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.475241] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.475243] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.476001] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.476005] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.478348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.478600] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.478781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.478784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.479532] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.479536] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.481842] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.482107] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.482300] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.482303] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.483060] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.483064] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.485354] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.485604] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.485785] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.485788] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.486532] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.486536] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.488848] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.489101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.489283] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.489285] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.490041] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.490045] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.492315] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.492582] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.492765] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.492767] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.493516] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.493520] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.495794] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.496057] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.496250] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.496253] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.497007] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.497011] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.499355] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.499608] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.499789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.499791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.500537] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.500542] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.502805] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.503056] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.503237] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.503240] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.503995] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.503999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.506325] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.506593] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.506775] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.506777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.507534] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.507539] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.509859] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.510123] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.510317] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.510320] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.511080] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.511084] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.513372] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.513624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.513810] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.513812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.514561] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.514566] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.516848] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.517100] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.517282] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.517284] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.518050] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.518054] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.520302] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.520569] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.520750] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.520753] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.521502] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.521506] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.523785] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.524050] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.524245] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.524248] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.525003] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.525007] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.527258] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.527531] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.527713] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.527716] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.528467] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.528471] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.530714] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.530963] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.531144] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.531146] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.531898] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.531902] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.534062] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.534346] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.534527] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.534530] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.535264] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.535268] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.537434] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.537687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.537868] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.537870] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.538630] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.538634] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.540898] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.541151] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.541350] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.541355] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.542089] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.542094] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.544390] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.544641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.544823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.544825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.545005] vecs0: Completed 145 queued resets

<6> [293.579501] i915: Running intel_hangcheck_live_selftests/igt_reset_wait

<6> [293.581464] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.581471] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.583410] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.583768] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.584039] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.584059] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.612588] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_ggtt

<6> [293.621285] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.621305] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.625301] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.626427] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.627254] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.627266] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.658586] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_ppgtt

<6> [293.665663] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.665666] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.668043] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.668284] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.668468] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.668470] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.697473] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence

<6> [293.700260] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.700268] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.702785] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.703208] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.703606] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.703631] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.741566] i915: Running intel_hangcheck_live_selftests/igt_handle_error

<7> [293.778462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [293.778806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [293.779055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [293.779298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [293.779561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [293.799859] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [293.868986] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [293.921672] i915: probe of 0000:00:02.0 failed with error -25

<6> [294.085186] [IGT] i915_selftest: finished subtest hangcheck, SUCCESS

Results for igt@i915_selftest@live@hangcheck