<5>[ 0.000000] Linux version 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ (kbuild2@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.2) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Mon Nov 13 00:29:41 UTC 2023 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ca3efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006ca3f000-0x000000006fdb6fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fdb7000-0x000000006fedbfff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006fedc000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fe11000 SMBIOS=0x6cb16000 MEMATTR=0x67f01018 ESRT=0x67f17118 TPMEventLog=0x67e02018 <6>[ 0.000000] efi: Remove mem282: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem284: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3323.D89.2309110529 09/11/2023 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000019] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000021] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.000393] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved <7>[ 0.000396] e820: update [mem 0x87f800000-0x87fffffff] usable ==> reserved <6>[ 0.000398] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000399] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.000404] esrt: Reserving ESRT space from 0x0000000067f17118 to 0x0000000067f17240. <7>[ 0.000411] e820: update [mem 0x67f17000-0x67f17fff] usable ==> reserved <6>[ 0.000427] Using GB pages for direct mapping <6>[ 0.001231] printk: log_buf_len: 1048576 bytes <6>[ 0.001234] printk: early log buf free: 259024(98%) <6>[ 0.001234] Secure boot disabled <6>[ 0.001237] ACPI: Early table checksum verification disabled <6>[ 0.001241] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.001244] ACPI: XSDT 0x000000006FF1D228 000194 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001249] ACPI: FACP 0x000000006FFDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001253] ACPI: DSDT 0x000000006FF55000 0838D1 (v02 INTEL MTL 00000002 01000013) <6>[ 0.001256] ACPI: FACS 0x000000006FDF7000 000040 <6>[ 0.001258] ACPI: SSDT 0x000000006FFFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001260] ACPI: SSDT 0x000000006FFFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001263] ACPI: SSDT 0x000000006FFFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001265] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001267] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.001269] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001271] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001273] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001276] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.001278] ACPI: SSDT 0x000000006FFED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001280] ACPI: DTPR 0x000000006FFEC000 000098 (v01 00000000 00000000) <6>[ 0.001282] ACPI: SSDT 0x000000006FFEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001284] ACPI: SSDT 0x000000006FFE8000 002447 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001286] ACPI: SSDT 0x000000006FFDE000 00998E (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001289] ACPI: SSDT 0x000000006FFDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001291] ACPI: HPET 0x000000006FFDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001293] ACPI: APIC 0x000000006FFDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001295] ACPI: MCFG 0x000000006FFD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001297] ACPI: SSDT 0x000000006FF45000 00FD7B (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001299] ACPI: SSDT 0x000000006FF43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001302] ACPI: SSDT 0x000000006FF3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001304] ACPI: SSDT 0x000000006FF38000 005331 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001306] ACPI: SSDT 0x000000006FFFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001308] ACPI: TPM2 0x000000006FF37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001310] ACPI: LPIT 0x000000006FF36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001312] ACPI: WSMT 0x000000006FF35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001314] ACPI: SSDT 0x000000006FF34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001316] ACPI: SSDT 0x000000006FF31000 002D1B (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001319] ACPI: DBGP 0x000000006FF30000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001321] ACPI: DBG2 0x000000006FF2F000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001323] ACPI: NHLT 0x000000006FF2E000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.001325] ACPI: SSDT 0x000000006FF2C000 001171 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001327] ACPI: SSDT 0x000000006FF26000 005CAF (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001330] ACPI: ECDT 0x000000006FF25000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001332] ACPI: DMAR 0x000000006FF24000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001334] ACPI: UEFI 0x000000006FDF2000 00063A (v01 INTEL RstVmdE 00000000 INTL 00000000) <6>[ 0.001336] ACPI: UEFI 0x000000006FDF1000 00005C (v01 INTEL RstVmdV 00000000 INTL 00000000) <6>[ 0.001338] ACPI: FPDT 0x000000006FF23000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001340] ACPI: SSDT 0x000000006FF21000 001014 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001343] ACPI: SSDT 0x000000006FF1E000 0027A7 (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001345] ACPI: SSDT 0x000000006FF1A000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001347] ACPI: SSDT 0x000000006FF18000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001349] ACPI: ASF! 0x000000006FF42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001351] ACPI: PHAT 0x000000006FF17000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001353] ACPI: BGRT 0x000000006FF16000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001355] ACPI: Reserving FACP table memory at [mem 0x6ffdc000-0x6ffdc113] <6>[ 0.001356] ACPI: Reserving DSDT table memory at [mem 0x6ff55000-0x6ffd88d0] <6>[ 0.001357] ACPI: Reserving FACS table memory at [mem 0x6fdf7000-0x6fdf703f] <6>[ 0.001357] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc38b] <6>[ 0.001358] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb70c] <6>[ 0.001359] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5e3] <6>[ 0.001359] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.001360] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.001361] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.001361] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.001362] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.001362] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.001363] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bc7] <6>[ 0.001364] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec097] <6>[ 0.001364] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebd02] <6>[ 0.001365] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea446] <6>[ 0.001366] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe798d] <6>[ 0.001366] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0f8] <6>[ 0.001367] ACPI: Reserving HPET table memory at [mem 0x6ffdb000-0x6ffdb037] <6>[ 0.001367] ACPI: Reserving APIC table memory at [mem 0x6ffda000-0x6ffda357] <6>[ 0.001368] ACPI: Reserving MCFG table memory at [mem 0x6ffd9000-0x6ffd903b] <6>[ 0.001369] ACPI: Reserving SSDT table memory at [mem 0x6ff45000-0x6ff54d7a] <6>[ 0.001369] ACPI: Reserving SSDT table memory at [mem 0x6ff43000-0x6ff4447e] <6>[ 0.001370] ACPI: Reserving SSDT table memory at [mem 0x6ff3e000-0x6ff4189b] <6>[ 0.001370] ACPI: Reserving SSDT table memory at [mem 0x6ff38000-0x6ff3d330] <6>[ 0.001371] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffd60d] <6>[ 0.001372] ACPI: Reserving TPM2 table memory at [mem 0x6ff37000-0x6ff3704b] <6>[ 0.001372] ACPI: Reserving LPIT table memory at [mem 0x6ff36000-0x6ff360cb] <6>[ 0.001373] ACPI: Reserving WSMT table memory at [mem 0x6ff35000-0x6ff35027] <6>[ 0.001374] ACPI: Reserving SSDT table memory at [mem 0x6ff34000-0x6ff34ca5] <6>[ 0.001374] ACPI: Reserving SSDT table memory at [mem 0x6ff31000-0x6ff33d1a] <6>[ 0.001375] ACPI: Reserving DBGP table memory at [mem 0x6ff30000-0x6ff30033] <6>[ 0.001376] ACPI: Reserving DBG2 table memory at [mem 0x6ff2f000-0x6ff2f053] <6>[ 0.001376] ACPI: Reserving NHLT table memory at [mem 0x6ff2e000-0x6ff2e98a] <6>[ 0.001377] ACPI: Reserving SSDT table memory at [mem 0x6ff2c000-0x6ff2d170] <6>[ 0.001377] ACPI: Reserving SSDT table memory at [mem 0x6ff26000-0x6ff2bcae] <6>[ 0.001378] ACPI: Reserving ECDT table memory at [mem 0x6ff25000-0x6ff25068] <6>[ 0.001379] ACPI: Reserving DMAR table memory at [mem 0x6ff24000-0x6ff240a7] <6>[ 0.001379] ACPI: Reserving UEFI table memory at [mem 0x6fdf2000-0x6fdf2639] <6>[ 0.001380] ACPI: Reserving UEFI table memory at [mem 0x6fdf1000-0x6fdf105b] <6>[ 0.001381] ACPI: Reserving FPDT table memory at [mem 0x6ff23000-0x6ff23043] <6>[ 0.001381] ACPI: Reserving SSDT table memory at [mem 0x6ff21000-0x6ff22013] <6>[ 0.001382] ACPI: Reserving SSDT table memory at [mem 0x6ff1e000-0x6ff207a6] <6>[ 0.001383] ACPI: Reserving SSDT table memory at [mem 0x6ff1a000-0x6ff1c8d2] <6>[ 0.001383] ACPI: Reserving SSDT table memory at [mem 0x6ff18000-0x6ff1919f] <6>[ 0.001384] ACPI: Reserving ASF! table memory at [mem 0x6ff42000-0x6ff42073] <6>[ 0.001385] ACPI: Reserving PHAT table memory at [mem 0x6ff17000-0x6ff1780f] <6>[ 0.001385] ACPI: Reserving BGRT table memory at [mem 0x6ff16000-0x6ff16037] <6>[ 0.001462] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.048044] Zone ranges: <6>[ 0.048046] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.048049] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.048051] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.048053] Movable zone start for each node <6>[ 0.048055] Early memory node ranges <6>[ 0.048056] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.048058] node 0: [mem 0x0000000000100000-0x000000006ca3efff] <6>[ 0.048059] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.048060] node 0: [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.048063] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.048067] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.048098] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.050706] On node 0, zone DMA32: 13760 pages in unavailable ranges <6>[ 0.097252] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.097643] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.097650] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.097695] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.097699] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.097702] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.097706] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.097708] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.097716] e820: update [mem 0x67ebd000-0x67ed7fff] usable ==> reserved <6>[ 0.097726] TSC deadline timer available <6>[ 0.097727] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.097741] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.097743] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.097745] PM: hibernation: Registered nosave memory: [mem 0x67ebd000-0x67ed7fff] <6>[ 0.097747] PM: hibernation: Registered nosave memory: [mem 0x67f17000-0x67f17fff] <6>[ 0.097748] PM: hibernation: Registered nosave memory: [mem 0x6ca3f000-0x6fdb6fff] <6>[ 0.097749] PM: hibernation: Registered nosave memory: [mem 0x6fdb7000-0x6fedbfff] <6>[ 0.097750] PM: hibernation: Registered nosave memory: [mem 0x6fedc000-0x6fffefff] <6>[ 0.097752] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff] <6>[ 0.097753] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff] <6>[ 0.097754] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.097755] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.097758] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.097763] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.101004] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.102475] percpu: Embedded 72 pages/cpu s255520 r8192 d31200 u524288 <7>[ 0.102479] pcpu-alloc: s255520 r8192 d31200 u524288 alloc=1*2097152 <7>[ 0.102481] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.102493] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.102500] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.102515] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.102580] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.102607] random: crng init done <6>[ 0.105429] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.106867] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.106960] Built 1 zonelists, mobility grouping on. Total pages: 8177207 <6>[ 0.106963] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.106964] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.107765] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.107777] software IO TLB: area num 32. <6>[ 0.692916] Memory: 32433736K/33228664K available (16384K kernel code, 2626K rwdata, 5672K rodata, 2616K init, 20960K bss, 794672K reserved, 0K cma-reserved) <4>[ 0.692922] ********************************************************** <4>[ 0.692923] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.692923] ** ** <4>[ 0.692923] ** This system shows unhashed kernel memory addresses ** <4>[ 0.692924] ** via the console, logs, and other interfaces. This ** <4>[ 0.692924] ** might reduce the security of your system. ** <4>[ 0.692925] ** ** <4>[ 0.692925] ** If you see this message and you are not debugging ** <4>[ 0.692926] ** the kernel, report this immediately to your system ** <4>[ 0.692926] ** administrator! ** <4>[ 0.692926] ** ** <4>[ 0.692927] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.692927] ********************************************************** <6>[ 0.693079] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.693488] Dynamic Preempt: full <6>[ 0.693821] Running RCU self tests <6>[ 0.693822] Running RCU synchronous self tests <6>[ 0.693845] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.693846] rcu: RCU lockdep checking is enabled. <6>[ 0.693847] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.693847] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.693848] Trampoline variant of Tasks RCU enabled. <6>[ 0.693849] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.693849] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.693926] Running RCU synchronous self tests <6>[ 0.697389] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.697763] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.698117] Console: colour dummy device 80x25 <6>[ 0.698129] printk: legacy console [tty1] enabled <6>[ 0.699953] printk: legacy console [ttyS0] enabled <4>[ 2.250513] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 2.258256] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 2.262358] ... MAX_LOCK_DEPTH: 48 <4>[ 2.266545] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 2.270907] ... CLASSHASH_SIZE: 4096 <4>[ 2.275268] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 2.279715] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 2.284245] ... CHAINHASH_SIZE: 65536 <4>[ 2.288689] memory used by lock dependency info: 9461 kB <4>[ 2.294085] memory used for stack traces: 8320 kB <4>[ 2.298877] per task-struct memory footprint: 1920 bytes <6>[ 2.304295] ACPI: Core revision 20230628 <6>[ 2.309819] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 2.315565] APIC: Switch to symmetric I/O mode setup <6>[ 2.320530] DMAR: Host address width 42 <6>[ 2.324370] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 2.329714] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 2.338488] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 2.343814] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 2.352588] DMAR: SATC flags: 0x1 <6>[ 2.355914] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 2.362266] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 2.367659] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 2.377945] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 2.387927] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 2.398447] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 2.399437] x86/tme: not enabled by BIOS <6>[ 2.399437] CPU0: Thermal monitoring enabled (TM1) <6>[ 2.399437] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 2.399437] process: using mwait in idle threads <6>[ 2.399437] CET detected: Indirect Branch Tracking enabled <6>[ 2.399437] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 2.399437] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 2.399437] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 2.399437] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 2.399437] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 2.399437] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 2.399437] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 2.399437] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 2.399437] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 2.399437] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 2.399437] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 2.399437] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 2.399437] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 2.399437] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 2.399437] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 2.399437] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format. <6>[ 2.399437] Freeing SMP alternatives memory: 36K <6>[ 2.399437] pid_max: default: 32768 minimum: 301 <6>[ 2.399437] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.399437] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.399437] Running RCU synchronous self tests <6>[ 2.399437] Running RCU synchronous self tests <6>[ 2.399437] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 2.400541] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 2.401473] Running RCU Tasks wait API self tests <6>[ 2.510497] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 2.511695] core: cpu_core PMU driver: <6>[ 2.512452] ... version: 5 <6>[ 2.513452] ... bit width: 48 <6>[ 2.514450] ... generic registers: 8 <6>[ 2.515451] ... value mask: 0000ffffffffffff <6>[ 2.516454] ... max period: 00007fffffffffff <6>[ 2.517454] ... fixed-purpose events: 4 <6>[ 2.518451] ... event mask: 0001000f000000ff <6>[ 2.519556] signal: max sigframe size: 3632 <6>[ 2.520481] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 2.521585] rcu: Hierarchical SRCU implementation. <6>[ 2.522448] rcu: Max phase no-delay instances is 400. <6>[ 2.525761] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 2.526921] smp: Bringing up secondary CPUs ... <6>[ 2.527700] smpboot: x86: Booting SMP configuration: <6>[ 2.528453] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 1.701519] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 1.701519] ... version: 5 <6>[ 1.701519] ... bit width: 48 <6>[ 1.701519] ... generic registers: 8 <6>[ 1.701519] ... value mask: 0000ffffffffffff <6>[ 1.701519] ... max period: 00007fffffffffff <6>[ 1.701519] ... fixed-purpose events: 3 <6>[ 1.701519] ... event mask: 00000007000000ff <4>[ 2.589653] #1 #3 #5 #7 #9 #11 <6>[ 2.596522] smp: Brought up 1 node, 22 CPUs <6>[ 2.598446] smpboot: Max logical packages: 1 <6>[ 2.599444] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 2.606140] devtmpfs: initialized <6>[ 2.607462] ACPI: PM: Registering ACPI NVS region [mem 0x6fdb7000-0x6fedbfff] (1200128 bytes) <6>[ 2.608903] Running RCU synchronous self tests <6>[ 2.609494] Running RCU synchronous self tests <6>[ 2.610513] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 2.611457] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 2.612745] pinctrl core: initialized pinctrl subsystem <6>[ 2.613886] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 2.615716] thermal_sys: Registered thermal governor 'fair_share' <6>[ 2.615719] thermal_sys: Registered thermal governor 'step_wise' <6>[ 2.616447] thermal_sys: Registered thermal governor 'user_space' <6>[ 2.617499] cpuidle: using governor menu <6>[ 2.619513] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 2.620697] PCI: MMCONFIG for domain 0000 [bus 00-df] at [mem 0xc0000000-0xcdffffff] (base 0xc0000000) <6>[ 2.621458] PCI: not using MMCONFIG <6>[ 2.622452] PCI: Using configuration type 1 for base access <4>[ 2.624788] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 2.626490] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 2.635518] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.642452] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.649500] cryptd: max_cpu_qlen set to 1000 <6>[ 2.670112] raid6: avx2x4 gen() 59173 MB/s <6>[ 2.691439] raid6: avx2x2 gen() 58604 MB/s <6>[ 2.712258] raid6: avx2x1 gen() 19318 MB/s <6>[ 2.716451] raid6: using algorithm avx2x4 gen() 59173 MB/s <6>[ 2.721470] Callback from call_rcu_tasks() invoked. <6>[ 2.737451] raid6: .... xor() 4005 MB/s, rmw enabled <6>[ 2.742454] raid6: using avx2x2 recovery algorithm <6>[ 2.747942] ACPI: Added _OSI(Module Device) <6>[ 2.752453] ACPI: Added _OSI(Processor Device) <6>[ 2.756452] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 2.761452] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 3.345881] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 3.369499] ACPI: EC: EC started <6>[ 3.372442] ACPI: EC: interrupt blocked <6>[ 3.383004] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.388454] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 5.240765] ACPI: _OSC evaluated successfully for all CPUs <6>[ 5.246456] ACPI: Interpreter enabled <6>[ 5.250585] ACPI: PM: (supports S0 S4 S5) <6>[ 5.254456] ACPI: Using IOAPIC for interrupt routing <6>[ 5.259647] PCI: MMCONFIG for domain 0000 [bus 00-df] at [mem 0xc0000000-0xcdffffff] (base 0xc0000000) <6>[ 5.313362] PCI: MMCONFIG at [mem 0xc0000000-0xcdffffff] reserved as ACPI motherboard resource <6>[ 5.322484] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 5.331464] PCI: Ignoring E820 reservations for host bridge windows <6>[ 5.374176] ACPI: Enabled 9 GPEs in block 00 to 7F <6>[ 5.374437] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 5.449063] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 5.637567] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 5.652765] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 5.681311] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 5.697402] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 5.720885] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 5.734330] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 5.748309] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 5.761660] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 5.869579] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 5.874868] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 5.879867] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 6.002672] ACPI: \_TZ_.FN00: New power resource <6>[ 6.007302] ACPI: \_TZ_.FN01: New power resource <6>[ 6.013265] ACPI: \_TZ_.FN02: New power resource <6>[ 6.018259] ACPI: \_TZ_.FN03: New power resource <6>[ 6.024262] ACPI: \_TZ_.FN04: New power resource <6>[ 6.034494] ACPI: \PIN_: New power resource <6>[ 6.042405] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-df]) <6>[ 6.048472] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 6.062199] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 6.077501] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 6.098051] PCI host bridge to bus 0000:00 <6>[ 6.102457] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 6.109462] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 6.115461] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 6.123464] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 6.130463] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 6.138466] pci_bus 0000:00: root bus resource [bus 00-df] <6>[ 6.156629] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 <6>[ 6.163209] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 <6>[ 6.169472] pci 0000:00:02.0: reg 0x10: [mem 0x501a000000-0x501affffff 64bit pref] <6>[ 6.176471] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 6.184516] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 6.192514] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 6.200118] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 <6>[ 6.205474] pci 0000:00:04.0: reg 0x10: [mem 0x501d280000-0x501d29ffff 64bit] <6>[ 6.214080] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 <6>[ 6.220468] pci 0000:00:05.0: reg 0x10: [mem 0x501c000000-0x501cffffff 64bit] <6>[ 6.227480] pci 0000:00:05.0: enabling Extended Tags <6>[ 6.233586] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 <6>[ 6.239611] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 6.251244] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 <6>[ 6.257743] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 6.268593] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 <6>[ 6.274733] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 6.286605] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 <6>[ 6.292472] pci 0000:00:08.0: reg 0x10: [mem 0x501d2e3000-0x501d2e3fff 64bit] <6>[ 6.300032] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 <6>[ 6.306467] pci 0000:00:0a.0: reg 0x10: [mem 0x501d240000-0x501d27ffff 64bit] <6>[ 6.313481] pci 0000:00:0a.0: enabling Extended Tags <6>[ 6.318729] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 <6>[ 6.324468] pci 0000:00:0b.0: reg 0x10: [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 6.331478] pci 0000:00:0b.0: reg 0x20: [mem 0x501d2e2000-0x501d2e2fff 64bit] <6>[ 6.339024] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 <6>[ 6.345478] pci 0000:00:0d.0: reg 0x10: [mem 0x501d2c0000-0x501d2cffff 64bit] <6>[ 6.352575] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 6.360558] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 <6>[ 6.366480] pci 0000:00:0d.3: reg 0x10: [mem 0x501d200000-0x501d23ffff 64bit] <6>[ 6.373476] pci 0000:00:0d.3: reg 0x18: [mem 0x501d2e1000-0x501d2e1fff 64bit] <6>[ 6.380580] pci 0000:00:0d.3: supports D1 D2 <6>[ 6.384452] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 6.393147] pci 0000:00:0e.0: [8086:7d0b] type 00 class 0x010400 <6>[ 6.399475] pci 0000:00:0e.0: reg 0x10: [mem 0x5018000000-0x5019ffffff 64bit] <6>[ 6.406468] pci 0000:00:0e.0: reg 0x18: [mem 0x8e000000-0x8effffff] <6>[ 6.412477] pci 0000:00:0e.0: reg 0x20: [mem 0x501b000000-0x501bffffff 64bit] <6>[ 6.420871] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 <6>[ 6.427472] pci 0000:00:12.0: reg 0x10: [mem 0x501d2b0000-0x501d2bffff 64bit] <6>[ 6.434533] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 6.442532] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 <6>[ 6.448474] pci 0000:00:14.0: reg 0x10: [mem 0x501d2a0000-0x501d2affff 64bit] <6>[ 6.455548] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 6.463953] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 <6>[ 6.470475] pci 0000:00:14.2: reg 0x10: [mem 0x501d2d4000-0x501d2d7fff 64bit] <6>[ 6.477471] pci 0000:00:14.2: reg 0x18: [mem 0x501d2e0000-0x501d2e0fff 64bit] <6>[ 6.484844] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 <6>[ 6.490509] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.499262] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 <6>[ 6.505511] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.514270] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 <6>[ 6.519508] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.528274] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 <6>[ 6.534507] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.543280] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 <6>[ 6.549483] pci 0000:00:16.0: reg 0x10: [mem 0x501d2db000-0x501d2dbfff 64bit] <6>[ 6.556564] pci 0000:00:16.0: PME# supported from D3hot <6>[ 6.564496] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 <6>[ 6.570470] pci 0000:00:16.3: reg 0x10: [io 0x3020-0x3027] <6>[ 6.576461] pci 0000:00:16.3: reg 0x14: [mem 0x8f121000-0x8f121fff] <6>[ 6.582848] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 <6>[ 6.588516] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.596279] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 <6>[ 6.602507] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.611221] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 <6>[ 6.618243] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 <6>[ 6.624501] pci 0000:00:1f.3: reg 0x10: [mem 0x501d2d0000-0x501d2d3fff 64bit] <6>[ 6.631516] pci 0000:00:1f.3: reg 0x20: [mem 0x501d000000-0x501d1fffff 64bit] <6>[ 6.638584] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 6.644988] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 <6>[ 6.651480] pci 0000:00:1f.4: reg 0x10: [mem 0x501d2d8000-0x501d2d80ff 64bit] <6>[ 6.658487] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] <6>[ 6.664968] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 <6>[ 6.671492] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] <6>[ 6.677831] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 <6>[ 6.684484] pci 0000:00:1f.6: reg 0x10: [mem 0x8f100000-0x8f11ffff] <6>[ 6.690615] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 6.698175] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 <6>[ 6.704521] pci 0000:01:00.0: reg 0x10: [mem 0x8f000000-0x8f003fff 64bit] <6>[ 6.712580] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 6.717466] pci 0000:00:06.0: bridge window [mem 0x8f000000-0x8f0fffff] <6>[ 6.723662] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 6.729475] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 6.736479] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 6.744652] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 6.749475] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 6.756478] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <7>[ 6.764498] pci_bus 0000:00: on NUMA node 0 <6>[ 11.253112] Low-power S0 idle used by default for system suspend <6>[ 11.673199] ACPI: EC: interrupt unblocked <6>[ 11.677440] ACPI: EC: event unblocked <6>[ 11.681439] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 11.686456] ACPI: EC: GPE=0x6e <6>[ 11.689453] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 11.696466] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 11.704500] iommu: Default domain type: Passthrough (set via kernel command line) <5>[ 11.713134] SCSI subsystem initialized <7>[ 11.716519] libata version 3.00 loaded. <6>[ 11.716639] ACPI: bus type USB registered <6>[ 11.720549] usbcore: registered new interface driver usbfs <6>[ 11.726498] usbcore: registered new interface driver hub <6>[ 11.731538] usbcore: registered new device driver usb <6>[ 11.737726] efivars: Registered efivars operations <6>[ 11.742627] Advanced Linux Sound Architecture Driver Initialized. <6>[ 11.750356] PCI: Using ACPI for IRQ routing <7>[ 11.769657] PCI: pci_cache_line_size set to 64 bytes <6>[ 11.769814] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window <7>[ 11.778628] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 11.778640] e820: reserve RAM buffer [mem 0x67ebd000-0x67ffffff] <7>[ 11.778645] e820: reserve RAM buffer [mem 0x67f17000-0x67ffffff] <7>[ 11.778649] e820: reserve RAM buffer [mem 0x6ca3f000-0x6fffffff] <7>[ 11.778653] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 11.779539] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 11.780437] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 11.780437] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 11.799459] vgaarb: loaded <6>[ 11.802888] clocksource: Switched to clocksource tsc-early <6>[ 11.808896] pnp: PnP ACPI init <6>[ 11.813126] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 11.819064] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 11.825727] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 11.833425] system 00:03: [io 0x06a4] has been reserved <6>[ 11.838756] system 00:03: [io 0x06a0] has been reserved <6>[ 11.871318] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 11.877954] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 11.884929] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 11.891901] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 11.898538] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 11.905510] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 11.912483] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 11.919456] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 11.932803] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 11.940256] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 11.951869] pnp: PnP ACPI: found 8 devices <6>[ 11.968777] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 11.977950] NET: Registered PF_INET protocol family <6>[ 11.983130] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 11.993892] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 12.002875] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 12.010641] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 12.019010] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 12.028754] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 12.035778] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 12.043354] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 12.051386] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 12.057091] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 12.065536] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 12.074008] pci 0000:00:07.0: BAR 7: assigned [io 0x4000-0x4fff] <6>[ 12.080109] pci 0000:00:07.3: BAR 7: assigned [io 0x5000-0x5fff] <6>[ 12.086211] pci 0000:00:15.0: BAR 0: assigned [mem 0x501d2d9000-0x501d2d9fff 64bit] <6>[ 12.093907] pci 0000:00:15.1: BAR 0: assigned [mem 0x501d2da000-0x501d2dafff 64bit] <6>[ 12.101632] pci 0000:00:15.2: BAR 0: assigned [mem 0x501d2dc000-0x501d2dcfff 64bit] <6>[ 12.109330] pci 0000:00:15.3: BAR 0: assigned [mem 0x501d2dd000-0x501d2ddfff 64bit] <6>[ 12.117024] pci 0000:00:19.0: BAR 0: assigned [mem 0x501d2de000-0x501d2defff 64bit] <6>[ 12.124722] pci 0000:00:19.1: BAR 0: assigned [mem 0x501d2df000-0x501d2dffff 64bit] <6>[ 12.132415] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff] <6>[ 12.139243] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 12.144224] pci 0000:00:06.0: bridge window [mem 0x8f000000-0x8f0fffff] <6>[ 12.151028] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 12.156277] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 12.162404] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 12.169215] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 12.177328] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 12.182575] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 12.188694] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 12.195507] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 12.203620] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 12.209810] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 12.215999] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 12.222879] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 12.229759] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 12.237075] pci_bus 0000:01: resource 1 [mem 0x8f000000-0x8f0fffff] <6>[ 12.243351] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 12.248931] pci_bus 0000:02: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 12.255205] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 12.262778] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 12.268359] pci_bus 0000:2c: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 12.274631] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 12.283906] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 12.291907] PCI: CLS 0 bytes, default 64 <6>[ 12.295929] DMAR: No RMRR found <6>[ 12.299102] DMAR: No ATSR found <6>[ 12.302255] DMAR: IOMMU feature sc_support inconsistent <6>[ 12.302260] DMAR: dmar0: Using Queued invalidation <6>[ 12.312309] DMAR: dmar1: Using Queued invalidation <6>[ 12.317931] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 12.323558] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 12.328695] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 12.333827] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 12.338966] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 12.344113] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 12.349267] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 12.354399] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 12.359535] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 12.364669] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 12.369839] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 12.375043] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 12.380262] pci 0000:00:0e.0: Adding to iommu group 11 <6>[ 12.385504] pci 0000:00:12.0: Adding to iommu group 12 <6>[ 12.390760] pci 0000:00:14.0: Adding to iommu group 13 <6>[ 12.395969] pci 0000:00:14.2: Adding to iommu group 13 <6>[ 12.401270] pci 0000:00:15.0: Adding to iommu group 14 <6>[ 12.406479] pci 0000:00:15.1: Adding to iommu group 14 <6>[ 12.411689] pci 0000:00:15.2: Adding to iommu group 14 <6>[ 12.416898] pci 0000:00:15.3: Adding to iommu group 14 <6>[ 12.422167] pci 0000:00:16.0: Adding to iommu group 15 <6>[ 12.427386] pci 0000:00:16.3: Adding to iommu group 15 <6>[ 12.432674] pci 0000:00:19.0: Adding to iommu group 16 <6>[ 12.437888] pci 0000:00:19.1: Adding to iommu group 16 <6>[ 12.443203] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 12.448413] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 12.453624] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 12.458837] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 12.464055] pci 0000:00:1f.6: Adding to iommu group 17 <6>[ 12.469278] pci 0000:01:00.0: Adding to iommu group 18 <6>[ 12.475025] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 12.481470] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 12.487915] software IO TLB: mapped [mem 0x000000006355c000-0x000000006755c000] (64MB) <6>[ 12.496313] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 12.504235] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 12.509987] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 12.515650] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 12.521317] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 12.529143] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 12.539208] clocksource: Switched to clocksource tsc <6>[ 12.544304] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 12.565539] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 12.575539] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 12.587512] NET: Registered PF_ALG protocol family <6>[ 12.592331] xor: automatically using best checksumming function avx <6>[ 12.599450] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 12.606855] io scheduler mq-deadline registered <6>[ 12.611397] io scheduler kyber registered <6>[ 12.617629] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 12.625044] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 12.631058] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 12.646766] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 12.652779] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 12.670738] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0 <6>[ 12.676519] pci_bus 10000:e0: root bus resource [bus e0-ff] <6>[ 12.682157] pci_bus 10000:e0: root bus resource [mem 0x8e000000-0x8effffff] <6>[ 12.689126] pci_bus 10000:e0: root bus resource [mem 0x501b002000-0x501bffffff 64bit] <6>[ 12.708404] vmd 0000:00:0e.0: Bound to PCI domain 10000 <6>[ 12.713881] efifb: probing for efifb <6>[ 12.717497] efifb: framebuffer at 0x7c800000, using 20252k, total 20250k <6>[ 12.724207] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 12.730390] efifb: scrolling: redraw <6>[ 12.733981] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 12.742548] Console: switching to colour frame buffer device 360x112 <6>[ 12.751312] fb0: EFI VGA frame buffer device <7>[ 12.757767] Monitor-Mwait will be used to enter C-1 state <7>[ 12.757789] Monitor-Mwait will be used to enter C-2 state <7>[ 12.757801] Monitor-Mwait will be used to enter C-3 state <6>[ 12.757812] ACPI: \_SB_.PR08: Found 3 idle states <6>[ 12.768459] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 12.774908] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 12.786399] ACPI: button: Lid Switch [LID0] <6>[ 12.790870] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 12.799485] ACPI: button: Sleep Button [SLPB] <6>[ 12.804059] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 12.812708] ACPI: button: Power Button [PWRB] <6>[ 12.868757] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 12.874426] ACPI: thermal: Thermal Zone [TZ00] (32 C) <6>[ 12.879962] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 12.881407] ACPI: battery: Slot [BAT0] (battery present) <6>[ 12.891695] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 12.892097] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 12.900967] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 12.911864] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 12.919047] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <4>[ 12.927911] hpet_acpi_add: no address or irqs in _CRS <6>[ 12.933303] Non-volatile memory driver v1.3 <6>[ 12.937603] Linux agpgart interface v0.103 <6>[ 12.972200] ACPI: bus type drm_connector registered <6>[ 12.988208] loop: module loaded <6>[ 12.992312] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 12.992684] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 12.999204] nvme nvme0: pci function 0000:01:00.0 <6>[ 13.004023] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 13.017255] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 13.027066] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 13.032300] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 13.039241] nvme nvme0: allocated 64 MiB host memory buffer. <6>[ 13.039685] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 13.039928] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 <6>[ 13.060677] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 13.067907] usb usb1: Product: xHCI Host Controller <6>[ 13.072788] usb usb1: Manufacturer: Linux 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ xhci-hcd <6>[ 13.081050] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 13.086423] hub 1-0:1.0: USB hub found <6>[ 13.090493] hub 1-0:1.0: 1 port detected <6>[ 13.090722] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 13.097311] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 <6>[ 13.107667] nvme0n1: p1 p2 <6>[ 13.107901] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 13.118143] usb usb2: Product: xHCI Host Controller <6>[ 13.123038] usb usb2: Manufacturer: Linux 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ xhci-hcd <6>[ 13.131317] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 13.136656] hub 2-0:1.0: USB hub found <6>[ 13.140524] hub 2-0:1.0: 4 ports detected <6>[ 13.167156] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 13.172422] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 13.181004] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 13.190977] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 13.196230] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 13.203637] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 13.211278] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 <6>[ 13.219568] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 13.226801] usb usb3: Product: xHCI Host Controller <6>[ 13.231690] usb usb3: Manufacturer: Linux 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ xhci-hcd <6>[ 13.239962] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 13.245418] hub 3-0:1.0: USB hub found <6>[ 13.249327] hub 3-0:1.0: 12 ports detected <6>[ 13.287092] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 <6>[ 13.295382] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 13.302620] usb usb4: Product: xHCI Host Controller <6>[ 13.307804] usb usb4: Manufacturer: Linux 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ xhci-hcd <6>[ 13.316120] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 13.321371] hub 4-0:1.0: USB hub found <6>[ 13.325250] hub 4-0:1.0: 2 ports detected <6>[ 13.334429] usbcore: registered new interface driver usb-storage <6>[ 13.340746] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 13.347548] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 14.058848] i8042: Can't read CTR while initializing i8042 <4>[ 14.064368] i8042: probe of i8042 failed with error -5 <6>[ 14.069844] mousedev: PS/2 mouse device common for all mice <6>[ 14.076343] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 14.082705] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 14.087585] rtc_cmos rtc_cmos: setting system clock to 1998-05-12T13:48:18 UTC (894980898) <6>[ 14.095988] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 14.103055] IR JVC protocol handler initialized <6>[ 14.107597] IR MCE Keyboard/mouse protocol handler initialized <6>[ 14.113437] IR NEC protocol handler initialized <6>[ 14.117981] IR RC5(x/sz) protocol handler initialized <6>[ 14.123484] IR RC6 protocol handler initialized <6>[ 14.128459] IR SANYO protocol handler initialized <6>[ 14.133603] IR Sharp protocol handler initialized <6>[ 14.138742] IR Sony protocol handler initialized <6>[ 14.143791] IR XMP protocol handler initialized <6>[ 14.152026] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 14.160942] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 14.169074] device-mapper: uevent: version 1.0.3 <6>[ 14.174858] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 14.183738] intel_pstate: Intel P-state driver initializing <6>[ 14.205739] intel_pstate: HWP enabled <6>[ 14.211133] sdhci: Secure Digital Host Controller Interface driver <6>[ 14.218387] sdhci: Copyright(c) Pierre Ossman <6>[ 14.228353] pstore: Using crash dump compression: deflate <6>[ 14.235021] pstore: Registered efi_pstore as persistent store backend <6>[ 14.242744] hid: raw HID events driver (C) Jiri Kosina <6>[ 14.248817] usbcore: registered new interface driver usbhid <6>[ 14.255063] usbhid: USB HID core driver <6>[ 14.259601] pci 0000:00:08.0: Setting to D3hot <6>[ 14.276411] pci 0000:00:05.0: Setting to D3hot <6>[ 14.288094] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 14.293194] pci 0000:00:0b.0: Setting to D3hot <6>[ 14.311657] pci 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 14.311935] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <4>[ 14.317589] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 14.325563] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 14.333947] intel_pmc_core INT33A1:00: initialized <6>[ 14.340938] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 14.346122] intel_rapl_msr: PL4 support detected. <6>[ 14.350514] usb 4-1: Manufacturer: Realtek <6>[ 14.350516] usb 4-1: SerialNumber: 000001 <6>[ 14.355359] intel_rapl_common: Found RAPL domain package <6>[ 14.371755] intel_rapl_common: Found RAPL domain core <6>[ 14.377480] intel_rapl_common: Found RAPL domain uncore <6>[ 14.383294] intel_rapl_common: Found RAPL domain psys <6>[ 14.392275] Initializing XFRM netlink socket <6>[ 14.396922] NET: Registered PF_INET6 protocol family <6>[ 14.403394] Segment Routing with IPv6 <6>[ 14.407407] In-situ OAM (IOAM) with IPv6 <6>[ 14.411701] mip6: Mobile IPv6 <6>[ 14.414981] NET: Registered PF_PACKET protocol family <6>[ 14.420338] NET: Registered PF_KEY protocol family <6>[ 14.438494] microcode: Microcode Update Driver: v2.2. <6>[ 14.438625] IPI shorthand broadcast: enabled <6>[ 14.448545] AVX2 version of gcm_enc/dec engaged. <6>[ 14.455912] AES CTR mode by8 optimization enabled <6>[ 14.468317] sched_clock: Marking stable (12767002492, 1700519560)->(14938692018, -471169966) <6>[ 14.478183] registered taskstats version 1 <6>[ 14.492128] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 14.504075] Btrfs loaded, zoned=no, fsverity=no <6>[ 14.511241] clk: Disabling unused clocks <6>[ 14.515510] ALSA device list: <6>[ 14.518923] No soundcards found. <6>[ 14.523166] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 14.587613] EXT4-fs (nvme0n1p2): mounted filesystem 347bc2b8-1faf-440f-b59b-c72a12954334 ro with ordered data mode. Quota mode: disabled. <6>[ 14.600279] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 14.609087] devtmpfs: mounted <6>[ 14.613965] Freeing unused kernel image (initmem) memory: 2616K <6>[ 14.620215] Write protecting the kernel read-only data: 22528k <6>[ 14.627837] Freeing unused kernel image (rodata/data gap) memory: 472K <6>[ 14.634715] Run /sbin/init as init process <7>[ 14.639114] with arguments: <7>[ 14.639116] /sbin/init <7>[ 14.639116] 3 <7>[ 14.639117] with environment: <7>[ 14.639118] HOME=/ <7>[ 14.639119] TERM=linux <7>[ 14.639120] BOOT_IMAGE=/boot/drm_intel <7>[ 14.737723] systemd[1]: System time before build time, advancing clock. <7>[ 14.793934] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 14.817089] systemd[1]: Detected architecture x86-64. <7>[ 14.841026] systemd[1]: Set hostname to . <6>[ 14.913004] cat (191) used greatest stack depth: 12984 bytes left <6>[ 14.920367] friendly-recove (188) used greatest stack depth: 12440 bytes left <6>[ 14.928258] mkdir (194) used greatest stack depth: 12168 bytes left <6>[ 14.937230] systemd-bless-b (192) used greatest stack depth: 11672 bytes left <7>[ 15.056401] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 15.069311] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 15.079118] systemd[1]: Created slice system-modprobe.slice. <7>[ 15.093937] systemd[1]: Created slice system-serial\x2dgetty.slice. <7>[ 15.109872] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 15.125939] systemd[1]: Created slice User and Session Slice. <7>[ 15.140749] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 15.158643] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 15.170507] systemd[1]: Reached target Remote File Systems. <7>[ 15.184595] systemd[1]: Reached target Slices. <7>[ 15.196762] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 15.215326] systemd[1]: Listening on Syslog Socket. <7>[ 15.227828] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 15.244739] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 15.271163] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 15.280366] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 15.297001] systemd[1]: Listening on Journal Socket. <7>[ 15.310086] systemd[1]: Listening on udev Control Socket. <7>[ 15.324890] systemd[1]: Listening on udev Kernel Socket. <7>[ 15.355222] systemd[1]: Mounting Huge Pages File System... <7>[ 15.374092] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 15.393655] systemd[1]: Mounting Kernel Debug File System... <7>[ 15.417853] systemd[1]: Mounting Kernel Trace File System... <7>[ 15.436115] systemd[1]: Starting Journal Service... <7>[ 15.451779] systemd[1]: Starting Set the console keyboard layout... <7>[ 15.469099] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 15.487787] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 15.497984] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 15.514835] systemd[1]: Starting File System Check on Root Device... <7>[ 15.532934] systemd[1]: Starting Load Kernel Modules... <7>[ 15.545389] systemd[1]: Starting udev Coldplug all Devices... <7>[ 15.554531] systemd[1]: Starting Uncomplicated firewall... <7>[ 15.562834] systemd[1]: Started Journal Service. <6>[ 15.748371] EXT4-fs (nvme0n1p2): re-mounted 347bc2b8-1faf-440f-b59b-c72a12954334 r/w. Quota mode: disabled. <6>[ 15.800888] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 15.820091] systemd-journald[214]: Received client request to flush runtime journal. <5>[ 15.826483] systemd-journald[214]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 16.208102] pps_core: LinuxPPS API ver. 1 registered <6>[ 16.208110] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 16.217259] PTP clock support registered <6>[ 16.218563] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 16.224623] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 16.224757] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 16.243067] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 16.243075] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 16.247298] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 16.350092] i2c i2c-0: 8/8 memory slots populated (from DMI) <4>[ 16.350097] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD <6>[ 16.357933] usbcore: registered new device driver r8152-cfgselector <6>[ 16.374141] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 16.374254] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <3>[ 16.380666] snd_hda_intel 0000:00:1f.3: no codecs found! <6>[ 16.411561] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 16.451487] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 16.489547] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 16.496613] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 16.516235] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 16.516270] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 16.516397] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 16.533851] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 16.535923] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 16.559484] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 16.559674] usbcore: registered new interface driver r8152 <6>[ 16.565962] usbcore: registered new interface driver cdc_ether <6>[ 16.568331] usbcore: registered new interface driver r8153_ecm <4>[ 16.612782] ********************************************************** <4>[ 16.612784] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 16.612785] ** ** <4>[ 16.612786] ** trace_printk() being used. Allocating extra memory. ** <4>[ 16.612786] ** ** <4>[ 16.612787] ** This means that this is a DEBUG kernel and it is ** <4>[ 16.612788] ** unsafe for production use. ** <4>[ 16.612789] ** ** <4>[ 16.612790] ** If you see this message and you are not debugging ** <4>[ 16.612791] ** the kernel, report this immediately to your vendor! ** <4>[ 16.612792] ** ** <4>[ 16.612793] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 16.612793] ********************************************************** <6>[ 16.619985] r8152 4-1:1.0 enxe2015072f451: renamed from eth0 <6>[ 16.620744] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <7>[ 16.652292] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 16.652471] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <6>[ 16.652607] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - HuC is not supported! <7>[ 16.652623] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 16.652726] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 16.652851] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 16.652953] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 16.653063] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 16.653239] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 16.653338] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 16.653696] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 16.653798] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 16.654250] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 16.654323] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 16.654796] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 16.654878] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 16.654961] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 16.655039] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 16.655687] Console: switching to colour dummy device 80x25 <6>[ 16.656855] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 16.656996] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 16.657009] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000080400947 <7>[ 16.657128] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 61440K <7>[ 16.657242] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 16.657333] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 16.657706] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6fe09018 <7>[ 16.657833] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 16.657939] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 16.658036] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 16.658130] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 16.658221] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 16.658318] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 16.658410] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 16.658490] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 16.658925] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 16.659055] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 16.659178] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 16.659294] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 16.659400] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 16.659504] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 16.659621] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.659722] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 16.659823] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 16.659923] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 16.660022] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.660121] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 16.660219] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 16.660317] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 16.660415] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.660516] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 16.660625] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 16.660725] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 16.660824] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.660921] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 16.661021] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 16.661121] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 16.661219] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.661316] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 16.661413] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 16.661509] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 16.661615] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.661716] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 16.662280] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 16.662384] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 253 <7>[ 16.662487] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 16.662596] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 16.662696] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 16.662795] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 16.662894] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 16.662991] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 16.663086] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 16.663187] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 16.663284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 16.663380] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 16.663476] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 78) <7>[ 16.663579] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 16.663679] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 16.663779] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 16.663878] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 16.663974] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 253 not known; assuming 39 <7>[ 16.664070] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 16.664171] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 16.664269] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 16.664368] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 16.664464] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 16.664568] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 16.664664] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 16.664759] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 16.664855] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 16.664953] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 16.665052] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 16.665148] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 16.665244] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 16.665341] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 16.665463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 16.665674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 16.665820] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 16.666020] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 16.666220] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 16.666357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 16.666461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 16.666573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 16.666725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 16.666838] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 16.666852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 16.666969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 16.667078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 16.667185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 16.667380] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 16.668751] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 16.669587] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 16.669710] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 16.669818] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 78 (78.0 usec) <7>[ 16.669919] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 79 (79.0 usec) <7>[ 16.670016] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 105 (105.0 usec) <7>[ 16.670111] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 106 (106.0 usec) <7>[ 16.670204] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 154 (154.0 usec) <6>[ 16.679363] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.17) <7>[ 16.684356] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 16.687802] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 16.689153] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 16.689393] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 16.689692] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 16.689831] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 16.689974] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 16.690097] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 16.690210] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 16.690323] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 16.690429] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 16.690543] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 16.690650] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 16.690752] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 16.690855] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 16.690976] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 16.691154] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 16.691254] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 16.691345] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 16.691433] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 16.691526] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 16.691747] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 16.692000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 16.693453] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 16.693673] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 16.695166] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 16.695878] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 16.696424] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 16.697044] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 16.698226] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 16.700461] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <6>[ 16.700631] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 16.707186] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 16.707198] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 16.707200] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 16.707235] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 16.707921] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 16.708574] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 16.708745] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 16.708887] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 16.709107] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 16.709309] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 16.709477] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 16.709652] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 16.709799] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 16.710053] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 16.710335] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 16.710485] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 16.710767] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 16.710857] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 16.711014] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 16.711233] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 16.711404] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 16.711604] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 16.711763] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 16.711972] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 16.712080] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 16.712175] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 16.712314] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 16.712465] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 16.712630] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 16.712819] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 16.712969] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 16.713126] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 16.713581] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 16.713760] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 16.713928] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 16.714091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 16.714192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 16.714290] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 16.714386] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 16.714485] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 16.714592] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 16.714689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 16.714782] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 16.714875] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 16.714967] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 16.715061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 16.715156] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 16.715250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 16.715342] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 16.715436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 16.715535] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 16.715627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 16.715718] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 16.715808] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 16.715900] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 16.715992] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 16.716082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 16.716173] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 16.716263] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 16.716355] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 16.716840] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 16.716969] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 16.717068] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 16.717158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 16.717246] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 16.717332] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 16.717415] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 16.717514] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 16.717622] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 16.717710] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 16.717795] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 16.717879] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 16.717965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 16.718091] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 16.718185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 16.718281] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 16.718374] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 16.718462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 16.718555] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 16.718639] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 16.718721] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 16.718814] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 16.718906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 16.718991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 16.719074] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 16.719156] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 16.719239] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 16.719393] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 16.719494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 16.719600] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 16.719694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 16.719786] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 16.719876] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 16.719970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 16.720108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 16.720193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 16.720279] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 16.720365] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 16.720448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 16.720534] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 16.720615] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 16.720733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 16.720829] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 16.720919] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 16.721007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 16.721095] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 16.721180] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 16.721267] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 16.721379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 16.721474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 16.721572] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 16.721661] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 16.721748] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 16.721835] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 16.721921] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 16.722032] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 16.722127] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 16.722219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 16.722308] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 16.722395] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 16.722482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 16.722574] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 16.722833] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 16.722945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 16.723049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 16.723152] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 16.723252] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 16.723352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 16.723450] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 16.723556] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 16.723656] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 16.723755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 16.723852] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 16.723949] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 16.724047] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 16.724145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 16.724246] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 16.724348] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 16.724448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 16.724553] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 16.724651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 16.724748] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 16.724844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 16.724942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 16.725042] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 16.725140] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 16.725248] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 16.725350] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 16.725451] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 16.725556] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.725653] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.725749] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.725844] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 16.725939] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 16.726035] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.726130] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.726224] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.726318] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 16.726411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 16.726510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 16.726618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 16.726927] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 16.727035] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 16.727139] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 16.727236] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 16.728681] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fc000000, pitch 11520, size 0x13c6800 <7>[ 16.728778] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 16.741635] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 16.752024] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 16.752145] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7>[ 16.752235] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 16.752354] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 16.752355] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 16.752356] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 16.752362] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 GT workarounds on global <7>[ 16.753164] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 engine workarounds on rcs'0 <7>[ 16.753262] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on rcs'0 <7>[ 16.753354] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 context workarounds on rcs'0 <7>[ 16.753893] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 engine workarounds on bcs'0 <7>[ 16.753996] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 16.754399] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 engine workarounds on ccs'0 <7>[ 16.754492] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 16.755510] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 16.755654] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 16.755777] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 16.769776] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 16.769910] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x400000 <7>[ 16.770020] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 16.770126] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 16.770228] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 16.770328] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 16.770427] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 16.770531] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 16.770627] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 16.770723] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 16.770817] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 16.770911] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 16.771005] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 16.771099] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 16.771731] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.13.1 <6>[ 16.777585] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <7>[ 16.785568] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 12ms, freq = 1700MHz, before = 1600MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 16.786899] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 16.788590] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 16.788597] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 16.789197] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 16.799143] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 16.799151] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 GT workarounds on global <7>[ 16.801627] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 16.802006] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 16.804261] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 16.804633] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 16.808503] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 16.808964] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 16.810243] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 16.810349] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 16.814646] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 16.815077] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 16.815480] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 16.837295] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 16.837449] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x600000 <7>[ 16.837576] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 16.837684] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 16.837791] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 16.837894] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 16.837998] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 16.838099] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 16.838199] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 16.838298] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 16.838396] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 16.838493] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 16.838611] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 16.838713] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 16.838816] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <6>[ 16.840674] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 16.841121] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.13.1 <6>[ 16.841124] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 16.859565] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 16ms, freq = 1300MHz, before = 1200MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 16.860092] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 16.869545] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 16.870365] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 16.870371] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 16.870622] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 16.878316] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7>[ 16.878538] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed other'6 to gsc0 <7>[ 16.878662] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7>[ 16.878769] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7>[ 16.878871] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7>[ 16.878970] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7>[ 16.879068] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed ccs'0 to ccs0 <7>[ 16.879282] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 16.879703] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 16.879999] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 16.880280] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 16.880551] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:235:DDI A/PHY A][CRTC:80:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 16.880756] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 16.880944] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 16.881133] i915 0000:00:02.0: [drm:intel_dp_audio_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 16.881307] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 16.881531] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 16.881756] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 16.881970] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 16.882169] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 16.882367] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 16.882601] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 16.882801] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 16.883016] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 16.883168] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4004 - 4096), size 0 -> 92 <7>[ 16.883314] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 16.883457] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.883617] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.883769] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.883913] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 16.884055] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.884196] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.884320] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.884442] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 16.884584] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.884706] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.884829] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.884954] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 16.885077] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.885197] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.885316] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.885434] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 16.885552] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.885657] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.885760] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.885861] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 16.885960] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.886057] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 16.886157] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 16.886288] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 16.886292] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 16.886430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 16.886579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 16.886708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 16.886834] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 16.886958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 16.887065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 16.887170] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 16.887277] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 16.887381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 16.887487] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 16.887596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 16.887701] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 16.887703] i915 0000:00:02.0: pixelformat: RGB <7>[ 16.887704] i915 0000:00:02.0: colorimetry: sRGB <7>[ 16.887705] i915 0000:00:02.0: bpc: 0 <7>[ 16.887707] i915 0000:00:02.0: dynamic range: VESA range <7>[ 16.887708] i915 0000:00:02.0: content type: Not defined <7>[ 16.887709] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 16.887817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 16.887925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 16.888033] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 16.888136] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 16.888239] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 16.888346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 16.888452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 16.888565] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 16.888667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 16.888768] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 16.888870] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 16.888984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 16.889094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 16.889199] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 16.889380] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.889500] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.889698] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.889862] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 16.890021] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 16.890173] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.890316] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.890454] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.890609] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 16.890744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 16.890880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 16.891015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 16.891148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 16.891281] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 16.891413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 16.891933] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6>[ 17.024145] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.0.0.1655, svn 1) <6>[ 17.044691] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 17.093611] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 17.094479] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 17.106517] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 17.107014] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 17.107429] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 17.158591] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 17.159144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 17.160238] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 17.160709] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 17.161084] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 17.161421] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 17.161779] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 17.162095] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 17.162402] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 17.162728] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 17.163028] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 17.163329] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 17.163651] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 17.163941] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 17.164230] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 17.164519] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 17.164851] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 17.165154] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 17.165455] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 17.165935] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 17.166224] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 17.166511] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 17.166843] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 17.167138] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 17.167428] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 17.167784] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 17.168301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 17.169746] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 17.170128] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7>[ 17.485135] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 17.790455] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 17.790809] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 17.791031] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 17.791279] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 17.992566] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 17.994177] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 17.994645] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 17.997703] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 17.998445] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 18.000002] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 18.001724] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 18.002572] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 18.004652] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 18.005049] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 18.007440] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 18.007887] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 18.009013] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 18.009871] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 18.010239] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 18.010693] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 18.021479] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 18.022793] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 18.023334] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 18.024919] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 18.025871] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 18.026484] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 18.026825] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 18.027126] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 18.027397] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 18.027671] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 18.027954] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 18.038366] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 18.038645] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 18.039352] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 18.039712] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 18.040197] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 18.040424] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 18.040661] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 18.041123] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 18.041401] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 18.041636] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 18.042062] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 18.042299] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 18.042666] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 18.042692] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7>[ 18.044164] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 18.052648] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 18.054608] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <7>[ 18.055601] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 18.055787] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 18.056230] i915 display info: display version: 14 <7>[ 18.056233] i915 display info: cursor_needs_physical: no <7>[ 18.056234] i915 display info: has_cdclk_crawl: yes <7>[ 18.056236] i915 display info: has_cdclk_squash: yes <7>[ 18.056237] i915 display info: has_ddi: yes <7>[ 18.056238] i915 display info: has_dp_mst: yes <7>[ 18.056240] i915 display info: has_dsb: yes <7>[ 18.056241] i915 display info: has_fpga_dbg: yes <7>[ 18.056243] i915 display info: has_gmch: no <7>[ 18.056244] i915 display info: has_hotplug: yes <7>[ 18.056246] i915 display info: has_hti: no <7>[ 18.056247] i915 display info: has_ipc: yes <7>[ 18.056249] i915 display info: has_overlay: no <7>[ 18.056250] i915 display info: has_psr: yes <7>[ 18.056252] i915 display info: has_psr_hw_tracking: no <7>[ 18.056253] i915 display info: overlay_needs_physical: no <7>[ 18.056255] i915 display info: supports_tv: no <7>[ 18.056256] i915 display info: has_hdcp: yes <7>[ 18.056258] i915 display info: has_dmc: yes <7>[ 18.056259] i915 display info: has_dsc: yes <7>[ 18.056376] [drm:drm_client_modeset_probe] <7>[ 18.056633] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 18.056765] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] <7>[ 18.056809] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 18.056812] i915 device info: graphics version: 12.71 <7>[ 18.056814] i915 device info: media version: 13 <7>[ 18.056816] i915 device info: graphics stepping: B0 <7>[ 18.056818] i915 device info: media stepping: C0 <7>[ 18.056819] i915 device info: display stepping: C0 <7>[ 18.056821] i915 device info: base die stepping: ** <7>[ 18.056822] i915 device info: gt: 0 <7>[ 18.056824] i915 device info: memory-regions: 0x41 <7>[ 18.056827] i915 device info: page-sizes: 0x211000 <7>[ 18.056828] i915 device info: platform: METEORLAKE <7>[ 18.056830] i915 device info: ppgtt-size: 48 <7>[ 18.056831] i915 device info: ppgtt-type: 2 <7>[ 18.056832] i915 device info: dma_mask_size: 46 <7>[ 18.056834] i915 device info: is_mobile: no <7>[ 18.056835] i915 device info: is_lp: no <7>[ 18.056837] i915 device info: require_force_probe: no <7>[ 18.056838] i915 device info: is_dgfx: no <7>[ 18.056840] i915 device info: has_64bit_reloc: yes <7>[ 18.056841] i915 device info: has_64k_pages: no <7>[ 18.056843] i915 device info: gpu_reset_clobbers_display: no <7>[ 18.056844] i915 device info: has_reset_engine: yes <7>[ 18.056846] i915 device info: has_3d_pipeline: yes <7>[ 18.056847] i915 device info: has_flat_ccs: no <7>[ 18.056849] i915 device info: has_global_mocs: yes <7>[ 18.056850] i915 device info: has_gmd_id: yes <7>[ 18.056852] i915 device info: has_gt_uc: yes <7>[ 18.056853] i915 device info: has_heci_pxp: no <7>[ 18.056854] i915 device info: has_heci_gscfi: no <7>[ 18.056855] i915 device info: has_guc_deprivilege: yes <7>[ 18.056857] i915 device info: has_guc_tlb_invalidation: yes <7>[ 18.056858] i915 device info: has_l3_ccs_read: no <7>[ 18.056859] i915 device info: has_l3_dpf: no <7>[ 18.056861] i915 device info: has_llc: no <7>[ 18.056862] i915 device info: has_logical_ring_contexts: yes <7>[ 18.056863] i915 device info: has_logical_ring_elsq: yes <7>[ 18.056865] i915 device info: has_media_ratio_mode: no <7>[ 18.056866] i915 device info: has_mslice_steering: no <7>[ 18.056868] i915 device info: has_oa_bpc_reporting: yes <7>[ 18.056869] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 18.056871] i915 device info: has_oam: yes <7>[ 18.056872] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 18.056874] i915 device info: has_pxp: yes <7>[ 18.056875] i915 device info: has_rc6: yes <7>[ 18.056876] i915 device info: has_rc6p: no <7>[ 18.056878] i915 device info: has_rps: yes <7>[ 18.056879] i915 device info: has_runtime_pm: yes <7>[ 18.056881] i915 device info: has_snoop: yes <7>[ 18.056882] i915 device info: has_coherent_ggtt: no <7>[ 18.056884] i915 device info: tuning_thread_rr_after_dep: no <7>[ 18.056885] i915 device info: unfenced_needs_alignment: no <7>[ 18.056886] i915 device info: hws_needs_physical: no <7>[ 18.056888] i915 device info: has_pooled_eu: no <7>[ 18.056889] i915 device info: rawclk rate: 38400 kHz <7>[ 18.056891] i915 device info: iommu: enabled <7>[ 18.056892] i915 device info: available engines: 400003 <7>[ 18.056894] i915 device info: subslice total: 8 <7>[ 18.056896] i915 device info: geometry dss mask=00000000,000000ff <7>[ 18.056898] i915 device info: compute dss mask=00000000,000000ff <7>[ 18.056900] i915 device info: EU total: 128 <7>[ 18.056901] i915 device info: EU per subslice: 16 <7>[ 18.056902] i915 device info: has slice power gating: no <7>[ 18.056904] i915 device info: has subslice power gating: no <7>[ 18.056905] i915 device info: has EU power gating: no <7>[ 18.056907] i915 device info: available engines: 4041400 <7>[ 18.056909] i915 device info: subslice total: 8 <7>[ 18.056910] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 18.056911] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 18.056913] i915 device info: EU total: 128 <7>[ 18.056914] i915 device info: EU per subslice: 16 <7>[ 18.056915] i915 device info: has slice power gating: no <7>[ 18.056917] i915 device info: has subslice power gating: no <7>[ 18.056918] i915 device info: has EU power gating: no <6>[ 18.056920] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 18.056921] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 18.056923] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 18.056796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 18.058609] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 18.060030] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 18.060574] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 18.061159] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 18.061771] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 18.062460] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 18.062475] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 18.062485] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 18.062591] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 18.062978] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 18.064261] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 18.064728] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 18.065885] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 18.066317] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes : <7>[ 18.066330] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 18.066345] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] <7>[ 18.066358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 18.066929] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 18.066948] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected <7>[ 18.066958] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7>[ 18.066968] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 18.067422] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 18.067437] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 18.067445] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] <7>[ 18.067454] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 18.068053] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 18.068069] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] disconnected <7>[ 18.068078] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] <7>[ 18.068087] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 18.068592] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 18.068608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 18.068616] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] <7>[ 18.068625] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 18.069076] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 18.069090] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] disconnected <7>[ 18.069098] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] <7>[ 18.069106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 18.070132] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 18.070152] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] disconnected <7>[ 18.070160] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 18.070168] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 18.070173] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 18.070178] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 18.070184] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 18.070189] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 18.070194] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 18.070335] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 18.070365] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 18.070371] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 18.070377] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 18.070382] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 18.070400] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 18.070503] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 18.070590] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 18.081415] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01e00000 <6>[ 18.082499] fbcon: i915drmfb (fb0) is primary device <7>[ 18.083745] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 18.084074] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:235:DDI A/PHY A][CRTC:80:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 18.084312] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 18.084548] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 18.084762] i915 0000:00:02.0: [drm:intel_dp_audio_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 18.084962] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 18.085190] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 18.085430] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4004), size 0 -> 4004 <7>[ 18.085647] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 18.085842] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 14, 14, 18, 18, 27, 0, 0, 0, 3, 0 <7>[ 18.086020] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 337, 337, 433, 433, 649, 0, 0, 63, 73, 87 <7>[ 18.086192] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 372, 372, 478, 478, 715, 0, 0, 64, 82, 88 <7>[ 18.086363] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 18.086615] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 18.086813] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 18.086991] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 18.087164] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 18.087334] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 18.087518] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 18.087721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 18.087882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 18.088039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 18.088194] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 18.088344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 18.088494] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 18.088656] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 18.088791] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 18.088925] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 18.089059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 18.089190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 18.089321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 18.089452] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 18.089453] i915 0000:00:02.0: pixelformat: RGB <7>[ 18.089455] i915 0000:00:02.0: colorimetry: sRGB <7>[ 18.089456] i915 0000:00:02.0: bpc: 0 <7>[ 18.089457] i915 0000:00:02.0: dynamic range: VESA range <7>[ 18.089459] i915 0000:00:02.0: content type: Not defined <7>[ 18.089460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 18.089602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 18.089734] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 18.089860] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 18.089975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 18.090094] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 18.090213] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 18.090329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 18.090445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 18.090568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 18.090683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 18.090794] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 18.090909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 18.091020] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 18.091126] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 18.091231] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.091335] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.091438] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.091546] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 18.091648] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 18.091749] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.091849] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.091947] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.092043] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 18.092141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 18.092242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 18.092339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 18.092438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 18.092538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 18.092634] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 18.092728] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 18.092823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 18.093148] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x2000071 0x13421c72) <7>[ 18.093741] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 18.094179] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 18.094582] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 18.094910] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 18.095219] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 18.095547] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 18.095844] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 18.096124] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 18.096398] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 18.096692] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 18.096967] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 18.097239] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 18.097519] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 18.097814] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 18.098087] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 18.098358] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 18.098680] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 18.098992] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 18.099266] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 18.099552] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 18.099806] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 18.100051] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 18.109810] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 18.112992] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 18.113660] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 18.116559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 18.117464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 18.118209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 18.118642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <6>[ 18.119921] Console: switching to colour frame buffer device 360x112 <6>[ 18.137983] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 18.143682] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7>[ 18.143716] [drm:drm_client_modeset_probe] <7>[ 18.144061] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] <7>[ 18.144093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 18.147043] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 18.148487] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 18.148899] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 18.149262] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 18.149635] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 18.150176] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 18.150188] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 18.150195] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 18.150241] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 18.150614] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 18.151876] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 18.152174] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 18.153438] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes : <7>[ 18.153463] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 18.153476] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] <7>[ 18.153490] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 18.154205] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected <7>[ 18.154215] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7>[ 18.154222] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 18.154680] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 18.154687] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] <7>[ 18.154694] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 18.155177] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] disconnected <7>[ 18.155184] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] <7>[ 18.155191] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 18.155604] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 18.155613] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] <7>[ 18.155621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 18.156008] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] disconnected <7>[ 18.156014] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] <7>[ 18.156020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 18.156371] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] disconnected <7>[ 18.156377] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 18.156383] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 18.156386] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 18.156389] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 18.156392] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 18.156395] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 18.156398] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 18.156589] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 18.156626] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 18.156632] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 18.156638] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 18.156644] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 18.156706] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 18.180587] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7>[ 18.180606] [drm:drm_client_modeset_probe] <7>[ 18.180666] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] <7>[ 18.180675] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 18.182190] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 18.183415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 18.183831] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 18.184341] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 18.184738] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 18.185095] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 18.185105] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 18.185112] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 18.185135] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 18.185376] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 18.186714] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 18.186927] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 18.187976] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes : <7>[ 18.187984] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 18.187994] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] <7>[ 18.188001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 18.188242] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected <7>[ 18.188249] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7>[ 18.188255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 18.188498] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 18.188503] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] <7>[ 18.188509] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 18.188794] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] disconnected <7>[ 18.188800] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] <7>[ 18.188805] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 18.189035] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 18.189040] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] <7>[ 18.189044] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 18.189271] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] disconnected <7>[ 18.189275] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] <7>[ 18.189279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 18.189506] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] disconnected <7>[ 18.189510] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 18.189515] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 18.189519] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 18.189550] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 18.189559] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 18.189564] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 18.189569] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 18.189625] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 18.189637] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 18.189640] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 18.189644] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 18.189647] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 18.189662] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 18.221877] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 18.222005] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <6>[ 19.462619] r8152 4-1:1.0 enxe2015072f451: carrier on <7>[ 21.246714] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 21.247245] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 21.247652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 21.248271] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 21.248658] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 22.305902] systemd-udevd (273) used greatest stack depth: 11304 bytes left <6>[ 22.306249] systemd-udevd (298) used greatest stack depth: 11216 bytes left <7>[ 23.839628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 23.839931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 23.868585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 23.869204] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 23.869590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <5>[ 34.356896] systemd-journald[214]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 34.373875] systemd-journald[214]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 34.589598] fuse: init (API version 7.39)