<5>[ 0.000000] Linux version 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ (kbuild2@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.2) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Mon Nov 13 00:29:41 UTC 2023 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ca3efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006ca3f000-0x000000006fdb6fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fdb7000-0x000000006fedbfff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006fedc000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fe11000 SMBIOS=0x6cb16000 MEMATTR=0x67f01018 ESRT=0x67f16098 TPMEventLog=0x67eda018 <6>[ 0.000000] efi: Remove mem280: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem282: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3323.D89.2309110529 09/11/2023 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000019] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000021] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.000393] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved <7>[ 0.000396] e820: update [mem 0x87f800000-0x87fffffff] usable ==> reserved <6>[ 0.000398] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000399] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.000404] esrt: Reserving ESRT space from 0x0000000067f16098 to 0x0000000067f161c0. <7>[ 0.000410] e820: update [mem 0x67f16000-0x67f16fff] usable ==> reserved <6>[ 0.000426] Using GB pages for direct mapping <6>[ 0.001210] printk: log_buf_len: 1048576 bytes <6>[ 0.001212] printk: early log buf free: 259072(98%) <6>[ 0.001213] Secure boot disabled <6>[ 0.001215] ACPI: Early table checksum verification disabled <6>[ 0.001219] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.001223] ACPI: XSDT 0x000000006FF1D228 000194 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001228] ACPI: FACP 0x000000006FFDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001232] ACPI: DSDT 0x000000006FF55000 0838D1 (v02 INTEL MTL 00000002 01000013) <6>[ 0.001235] ACPI: FACS 0x000000006FDF7000 000040 <6>[ 0.001237] ACPI: SSDT 0x000000006FFFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001239] ACPI: SSDT 0x000000006FFFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001242] ACPI: SSDT 0x000000006FFFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001244] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001246] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.001248] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001250] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001252] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001255] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.001257] ACPI: SSDT 0x000000006FFED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001259] ACPI: DTPR 0x000000006FFEC000 000098 (v01 00000000 00000000) <6>[ 0.001261] ACPI: SSDT 0x000000006FFEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001263] ACPI: SSDT 0x000000006FFE8000 002447 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001266] ACPI: SSDT 0x000000006FFDE000 00998E (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001268] ACPI: SSDT 0x000000006FFDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001270] ACPI: HPET 0x000000006FFDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001272] ACPI: APIC 0x000000006FFDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001274] ACPI: MCFG 0x000000006FFD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001276] ACPI: SSDT 0x000000006FF45000 00FD7B (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001278] ACPI: SSDT 0x000000006FF43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001281] ACPI: SSDT 0x000000006FF3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001283] ACPI: SSDT 0x000000006FF38000 005331 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001285] ACPI: SSDT 0x000000006FFFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001287] ACPI: TPM2 0x000000006FF37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001289] ACPI: LPIT 0x000000006FF36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001291] ACPI: WSMT 0x000000006FF35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001293] ACPI: SSDT 0x000000006FF34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001296] ACPI: SSDT 0x000000006FF31000 002D1B (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001298] ACPI: DBGP 0x000000006FF30000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001300] ACPI: DBG2 0x000000006FF2F000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001302] ACPI: NHLT 0x000000006FF2E000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.001304] ACPI: SSDT 0x000000006FF2C000 001171 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001306] ACPI: SSDT 0x000000006FF26000 005CAF (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001309] ACPI: ECDT 0x000000006FF25000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001311] ACPI: DMAR 0x000000006FF24000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001313] ACPI: UEFI 0x000000006FDF2000 00063A (v01 INTEL RstVmdE 00000000 INTL 00000000) <6>[ 0.001315] ACPI: UEFI 0x000000006FDF1000 00005C (v01 INTEL RstVmdV 00000000 INTL 00000000) <6>[ 0.001317] ACPI: FPDT 0x000000006FF23000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001320] ACPI: SSDT 0x000000006FF21000 001014 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001322] ACPI: SSDT 0x000000006FF1E000 0027A7 (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001324] ACPI: SSDT 0x000000006FF1A000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001326] ACPI: SSDT 0x000000006FF18000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001328] ACPI: ASF! 0x000000006FF42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001330] ACPI: PHAT 0x000000006FF17000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001332] ACPI: BGRT 0x000000006FF16000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001334] ACPI: Reserving FACP table memory at [mem 0x6ffdc000-0x6ffdc113] <6>[ 0.001335] ACPI: Reserving DSDT table memory at [mem 0x6ff55000-0x6ffd88d0] <6>[ 0.001336] ACPI: Reserving FACS table memory at [mem 0x6fdf7000-0x6fdf703f] <6>[ 0.001337] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc38b] <6>[ 0.001337] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb70c] <6>[ 0.001338] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5e3] <6>[ 0.001339] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.001339] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.001340] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.001341] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.001341] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.001342] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.001342] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bc7] <6>[ 0.001343] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec097] <6>[ 0.001344] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebd02] <6>[ 0.001344] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea446] <6>[ 0.001345] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe798d] <6>[ 0.001346] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0f8] <6>[ 0.001346] ACPI: Reserving HPET table memory at [mem 0x6ffdb000-0x6ffdb037] <6>[ 0.001347] ACPI: Reserving APIC table memory at [mem 0x6ffda000-0x6ffda357] <6>[ 0.001348] ACPI: Reserving MCFG table memory at [mem 0x6ffd9000-0x6ffd903b] <6>[ 0.001348] ACPI: Reserving SSDT table memory at [mem 0x6ff45000-0x6ff54d7a] <6>[ 0.001349] ACPI: Reserving SSDT table memory at [mem 0x6ff43000-0x6ff4447e] <6>[ 0.001349] ACPI: Reserving SSDT table memory at [mem 0x6ff3e000-0x6ff4189b] <6>[ 0.001350] ACPI: Reserving SSDT table memory at [mem 0x6ff38000-0x6ff3d330] <6>[ 0.001351] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffd60d] <6>[ 0.001351] ACPI: Reserving TPM2 table memory at [mem 0x6ff37000-0x6ff3704b] <6>[ 0.001352] ACPI: Reserving LPIT table memory at [mem 0x6ff36000-0x6ff360cb] <6>[ 0.001353] ACPI: Reserving WSMT table memory at [mem 0x6ff35000-0x6ff35027] <6>[ 0.001353] ACPI: Reserving SSDT table memory at [mem 0x6ff34000-0x6ff34ca5] <6>[ 0.001354] ACPI: Reserving SSDT table memory at [mem 0x6ff31000-0x6ff33d1a] <6>[ 0.001355] ACPI: Reserving DBGP table memory at [mem 0x6ff30000-0x6ff30033] <6>[ 0.001355] ACPI: Reserving DBG2 table memory at [mem 0x6ff2f000-0x6ff2f053] <6>[ 0.001356] ACPI: Reserving NHLT table memory at [mem 0x6ff2e000-0x6ff2e98a] <6>[ 0.001357] ACPI: Reserving SSDT table memory at [mem 0x6ff2c000-0x6ff2d170] <6>[ 0.001357] ACPI: Reserving SSDT table memory at [mem 0x6ff26000-0x6ff2bcae] <6>[ 0.001358] ACPI: Reserving ECDT table memory at [mem 0x6ff25000-0x6ff25068] <6>[ 0.001358] ACPI: Reserving DMAR table memory at [mem 0x6ff24000-0x6ff240a7] <6>[ 0.001359] ACPI: Reserving UEFI table memory at [mem 0x6fdf2000-0x6fdf2639] <6>[ 0.001360] ACPI: Reserving UEFI table memory at [mem 0x6fdf1000-0x6fdf105b] <6>[ 0.001360] ACPI: Reserving FPDT table memory at [mem 0x6ff23000-0x6ff23043] <6>[ 0.001361] ACPI: Reserving SSDT table memory at [mem 0x6ff21000-0x6ff22013] <6>[ 0.001362] ACPI: Reserving SSDT table memory at [mem 0x6ff1e000-0x6ff207a6] <6>[ 0.001362] ACPI: Reserving SSDT table memory at [mem 0x6ff1a000-0x6ff1c8d2] <6>[ 0.001363] ACPI: Reserving SSDT table memory at [mem 0x6ff18000-0x6ff1919f] <6>[ 0.001364] ACPI: Reserving ASF! table memory at [mem 0x6ff42000-0x6ff42073] <6>[ 0.001364] ACPI: Reserving PHAT table memory at [mem 0x6ff17000-0x6ff1780f] <6>[ 0.001365] ACPI: Reserving BGRT table memory at [mem 0x6ff16000-0x6ff16037] <6>[ 0.001440] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.048098] Zone ranges: <6>[ 0.048100] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.048102] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.048105] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.048107] Movable zone start for each node <6>[ 0.048108] Early memory node ranges <6>[ 0.048109] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.048111] node 0: [mem 0x0000000000100000-0x000000006ca3efff] <6>[ 0.048113] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.048114] node 0: [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.048118] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.048122] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.048152] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.050681] On node 0, zone DMA32: 13760 pages in unavailable ranges <6>[ 0.097102] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.097783] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.097789] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.097834] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.097838] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.097841] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.097844] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.097846] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.097854] e820: update [mem 0x67ebd000-0x67ed7fff] usable ==> reserved <6>[ 0.097862] TSC deadline timer available <6>[ 0.097863] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.097876] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.097878] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.097880] PM: hibernation: Registered nosave memory: [mem 0x67ebd000-0x67ed7fff] <6>[ 0.097882] PM: hibernation: Registered nosave memory: [mem 0x67f16000-0x67f16fff] <6>[ 0.097883] PM: hibernation: Registered nosave memory: [mem 0x6ca3f000-0x6fdb6fff] <6>[ 0.097884] PM: hibernation: Registered nosave memory: [mem 0x6fdb7000-0x6fedbfff] <6>[ 0.097885] PM: hibernation: Registered nosave memory: [mem 0x6fedc000-0x6fffefff] <6>[ 0.097887] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff] <6>[ 0.097888] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff] <6>[ 0.097889] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.097890] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.097892] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.097897] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.101038] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.102512] percpu: Embedded 72 pages/cpu s255520 r8192 d31200 u524288 <7>[ 0.102516] pcpu-alloc: s255520 r8192 d31200 u524288 alloc=1*2097152 <7>[ 0.102519] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.102527] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.102534] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.102548] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.102602] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.102631] random: crng init done <6>[ 0.105494] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.107015] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.107112] Built 1 zonelists, mobility grouping on. Total pages: 8177207 <6>[ 0.107115] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.107116] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.107922] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.107933] software IO TLB: area num 32. <6>[ 0.692381] Memory: 32434044K/33228664K available (16384K kernel code, 2626K rwdata, 5672K rodata, 2616K init, 20960K bss, 794364K reserved, 0K cma-reserved) <4>[ 0.692386] ********************************************************** <4>[ 0.692387] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.692387] ** ** <4>[ 0.692388] ** This system shows unhashed kernel memory addresses ** <4>[ 0.692388] ** via the console, logs, and other interfaces. This ** <4>[ 0.692389] ** might reduce the security of your system. ** <4>[ 0.692389] ** ** <4>[ 0.692389] ** If you see this message and you are not debugging ** <4>[ 0.692390] ** the kernel, report this immediately to your system ** <4>[ 0.692390] ** administrator! ** <4>[ 0.692391] ** ** <4>[ 0.692391] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.692391] ********************************************************** <6>[ 0.692550] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.692964] Dynamic Preempt: full <6>[ 0.693301] Running RCU self tests <6>[ 0.693302] Running RCU synchronous self tests <6>[ 0.693333] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.693334] rcu: RCU lockdep checking is enabled. <6>[ 0.693334] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.693335] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.693335] Trampoline variant of Tasks RCU enabled. <6>[ 0.693336] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.693337] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.693411] Running RCU synchronous self tests <6>[ 0.696888] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.697263] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.697613] Console: colour dummy device 80x25 <6>[ 0.697626] printk: legacy console [tty0] enabled <4>[ 0.699410] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.699421] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.699426] ... MAX_LOCK_DEPTH: 48 <4>[ 0.699431] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 0.699437] ... CLASSHASH_SIZE: 4096 <4>[ 0.699443] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.699449] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 0.699455] ... CHAINHASH_SIZE: 65536 <4>[ 0.699461] memory used by lock dependency info: 9461 kB <4>[ 0.699467] memory used for stack traces: 8320 kB <4>[ 0.699473] per task-struct memory footprint: 1920 bytes <6>[ 0.699489] ACPI: Core revision 20230628 <6>[ 0.700317] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.700325] APIC: Switch to symmetric I/O mode setup <6>[ 0.700333] DMAR: Host address width 42 <6>[ 0.700339] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.700370] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.700382] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.700399] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 0.700410] DMAR: SATC flags: 0x1 <6>[ 0.700420] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.700428] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.700436] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.702128] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.706459] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.706487] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.706549] x86/tme: not enabled by BIOS <6>[ 0.706560] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.706568] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.706758] process: using mwait in idle threads <6>[ 0.706768] CET detected: Indirect Branch Tracking enabled <6>[ 0.706776] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.706782] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.706793] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.706804] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.706811] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 0.706823] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.706833] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.706853] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.706863] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.706870] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.706878] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.706887] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.706897] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.706904] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.706912] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.706920] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format. <6>[ 0.707479] Freeing SMP alternatives memory: 36K <6>[ 0.707479] pid_max: default: 32768 minimum: 301 <6>[ 0.707479] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.707479] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.707479] Running RCU synchronous self tests <6>[ 0.707479] Running RCU synchronous self tests <6>[ 0.707479] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.707479] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 0.707479] Running RCU Tasks wait API self tests <6>[ 0.810524] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.811069] core: cpu_core PMU driver: <6>[ 0.811092] ... version: 5 <6>[ 0.811105] ... bit width: 48 <6>[ 0.811116] ... generic registers: 8 <6>[ 0.811125] ... value mask: 0000ffffffffffff <6>[ 0.811138] ... max period: 00007fffffffffff <6>[ 0.811148] ... fixed-purpose events: 4 <6>[ 0.811157] ... event mask: 0001000f000000ff <6>[ 0.811240] signal: max sigframe size: 3632 <6>[ 0.811271] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 0.811408] rcu: Hierarchical SRCU implementation. <6>[ 0.811419] rcu: Max phase no-delay instances is 400. <6>[ 0.813633] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.814256] smp: Bringing up secondary CPUs ... <6>[ 0.815723] smpboot: x86: Booting SMP configuration: <6>[ 0.815737] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.010070] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 0.010070] ... version: 5 <6>[ 0.010070] ... bit width: 48 <6>[ 0.010070] ... generic registers: 8 <6>[ 0.010070] ... value mask: 0000ffffffffffff <6>[ 0.010070] ... max period: 00007fffffffffff <6>[ 0.010070] ... fixed-purpose events: 3 <6>[ 0.010070] ... event mask: 00000007000000ff <4>[ 0.831658] #1 #3 #5 #7 #9 #11 <6>[ 0.837567] smp: Brought up 1 node, 22 CPUs <6>[ 0.838508] smpboot: Max logical packages: 1 <6>[ 0.838516] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.844058] devtmpfs: initialized <6>[ 0.845402] ACPI: PM: Registering ACPI NVS region [mem 0x6fdb7000-0x6fedbfff] (1200128 bytes) <6>[ 0.845940] Running RCU synchronous self tests <6>[ 0.845962] Running RCU synchronous self tests <6>[ 0.846037] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.846037] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 0.846037] pinctrl core: initialized pinctrl subsystem <6>[ 0.846927] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.848135] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.848137] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.848146] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.848220] cpuidle: using governor menu <6>[ 0.848507] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.848788] PCI: MMCONFIG for domain 0000 [bus 00-df] at [mem 0xc0000000-0xcdffffff] (base 0xc0000000) <6>[ 0.848810] PCI: not using MMCONFIG <6>[ 0.848818] PCI: Using configuration type 1 for base access <4>[ 0.850241] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 0.850595] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.851608] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.851608] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.852534] cryptd: max_cpu_qlen set to 1000 <6>[ 0.868543] raid6: avx2x4 gen() 21505 MB/s <6>[ 0.885609] raid6: avx2x2 gen() 22691 MB/s <6>[ 0.902675] raid6: avx2x1 gen() 19157 MB/s <6>[ 0.902687] raid6: using algorithm avx2x2 gen() 22691 MB/s <6>[ 0.920481] raid6: .... xor() 13239 MB/s, rmw enabled <6>[ 0.920481] raid6: using avx2x2 recovery algorithm <6>[ 0.920519] Callback from call_rcu_tasks() invoked. <6>[ 0.920481] ACPI: Added _OSI(Module Device) <6>[ 0.920481] ACPI: Added _OSI(Processor Device) <6>[ 0.920481] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 0.920481] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 1.503733] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 1.520729] ACPI: EC: EC started <6>[ 1.520748] ACPI: EC: interrupt blocked <6>[ 1.527258] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 1.527273] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 3.429269] ACPI: _OSC evaluated successfully for all CPUs <6>[ 3.429289] ACPI: Interpreter enabled <6>[ 3.429435] ACPI: PM: (supports S0 S4 S5) <6>[ 3.429452] ACPI: Using IOAPIC for interrupt routing <6>[ 3.429659] PCI: MMCONFIG for domain 0000 [bus 00-df] at [mem 0xc0000000-0xcdffffff] (base 0xc0000000) <6>[ 3.474932] PCI: MMCONFIG at [mem 0xc0000000-0xcdffffff] reserved as ACPI motherboard resource <6>[ 3.474976] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 3.475001] PCI: Ignoring E820 reservations for host bridge windows <6>[ 3.512038] ACPI: Enabled 9 GPEs in block 00 to 7F <6>[ 3.512083] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 3.576987] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 3.761604] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 3.770935] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 3.794777] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 3.804742] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 3.823198] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 3.830119] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 3.839011] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 3.848620] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 3.949083] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 3.949511] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 3.949938] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 4.067235] ACPI: \_TZ_.FN00: New power resource <6>[ 4.068070] ACPI: \_TZ_.FN01: New power resource <6>[ 4.068885] ACPI: \_TZ_.FN02: New power resource <6>[ 4.069700] ACPI: \_TZ_.FN03: New power resource <6>[ 4.070525] ACPI: \_TZ_.FN04: New power resource <6>[ 4.076475] ACPI: \PIN_: New power resource <6>[ 4.080359] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-df]) <6>[ 4.080393] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 4.085051] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 4.093986] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 4.106603] PCI host bridge to bus 0000:00 <6>[ 4.106622] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 4.106645] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 4.106667] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 4.106694] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 4.106718] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 4.106745] pci_bus 0000:00: root bus resource [bus 00-df] <6>[ 4.119199] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 <6>[ 4.119986] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 <6>[ 4.120020] pci 0000:00:02.0: reg 0x10: [mem 0x501a000000-0x501affffff 64bit pref] <6>[ 4.120052] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 4.120129] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 4.120204] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 4.121839] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 <6>[ 4.121875] pci 0000:00:04.0: reg 0x10: [mem 0x501d280000-0x501d29ffff 64bit] <6>[ 4.123505] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 <6>[ 4.123534] pci 0000:00:05.0: reg 0x10: [mem 0x501c000000-0x501cffffff 64bit] <6>[ 4.123574] pci 0000:00:05.0: enabling Extended Tags <6>[ 4.124956] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 <6>[ 4.125457] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 4.131599] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 <6>[ 4.131883] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 4.137126] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 <6>[ 4.137401] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 4.142627] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 <6>[ 4.142661] pci 0000:00:08.0: reg 0x10: [mem 0x501d2e3000-0x501d2e3fff 64bit] <6>[ 4.143235] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 <6>[ 4.143263] pci 0000:00:0a.0: reg 0x10: [mem 0x501d240000-0x501d27ffff 64bit] <6>[ 4.143305] pci 0000:00:0a.0: enabling Extended Tags <6>[ 4.143596] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 <6>[ 4.143626] pci 0000:00:0b.0: reg 0x10: [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 4.143661] pci 0000:00:0b.0: reg 0x20: [mem 0x501d2e2000-0x501d2e2fff 64bit] <6>[ 4.144269] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 <6>[ 4.144306] pci 0000:00:0d.0: reg 0x10: [mem 0x501d2c0000-0x501d2cffff 64bit] <6>[ 4.144467] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 4.146594] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 <6>[ 4.146641] pci 0000:00:0d.3: reg 0x10: [mem 0x501d200000-0x501d23ffff 64bit] <6>[ 4.146673] pci 0000:00:0d.3: reg 0x18: [mem 0x501d2e1000-0x501d2e1fff 64bit] <6>[ 4.146775] pci 0000:00:0d.3: supports D1 D2 <6>[ 4.146789] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.148498] pci 0000:00:0e.0: [8086:7d0b] type 00 class 0x010400 <6>[ 4.148534] pci 0000:00:0e.0: reg 0x10: [mem 0x5018000000-0x5019ffffff 64bit] <6>[ 4.148563] pci 0000:00:0e.0: reg 0x18: [mem 0x8e000000-0x8effffff] <6>[ 4.148600] pci 0000:00:0e.0: reg 0x20: [mem 0x501b000000-0x501bffffff 64bit] <6>[ 4.150042] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 <6>[ 4.150075] pci 0000:00:12.0: reg 0x10: [mem 0x501d2b0000-0x501d2bffff 64bit] <6>[ 4.150179] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 4.153308] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 <6>[ 4.153343] pci 0000:00:14.0: reg 0x10: [mem 0x501d2a0000-0x501d2affff 64bit] <6>[ 4.153452] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 4.155963] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 <6>[ 4.156000] pci 0000:00:14.2: reg 0x10: [mem 0x501d2d4000-0x501d2d7fff 64bit] <6>[ 4.156033] pci 0000:00:14.2: reg 0x18: [mem 0x501d2e0000-0x501d2e0fff 64bit] <6>[ 4.156440] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 <6>[ 4.156530] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.158353] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 <6>[ 4.158421] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.160289] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 <6>[ 4.160359] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.162236] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 <6>[ 4.162304] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.164186] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 <6>[ 4.164226] pci 0000:00:16.0: reg 0x10: [mem 0x501d2db000-0x501d2dbfff 64bit] <6>[ 4.164352] pci 0000:00:16.0: PME# supported from D3hot <6>[ 4.167431] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 <6>[ 4.167462] pci 0000:00:16.3: reg 0x10: [io 0x3020-0x3027] <6>[ 4.167485] pci 0000:00:16.3: reg 0x14: [mem 0x8f121000-0x8f121fff] <6>[ 4.167894] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 <6>[ 4.167963] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.168792] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 <6>[ 4.168860] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.170648] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 <6>[ 4.172466] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 <6>[ 4.172524] pci 0000:00:1f.3: reg 0x10: [mem 0x501d2d0000-0x501d2d3fff 64bit] <6>[ 4.172601] pci 0000:00:1f.3: reg 0x20: [mem 0x501d000000-0x501d1fffff 64bit] <6>[ 4.172746] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 4.173297] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 <6>[ 4.173337] pci 0000:00:1f.4: reg 0x10: [mem 0x501d2d8000-0x501d2d80ff 64bit] <6>[ 4.173385] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] <6>[ 4.174915] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 <6>[ 4.174968] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] <6>[ 4.175361] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 <6>[ 4.175405] pci 0000:00:1f.6: reg 0x10: [mem 0x8f100000-0x8f11ffff] <6>[ 4.175583] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 4.177514] pci 0000:01:00.0: [2646:2263] type 00 class 0x010802 <6>[ 4.177639] pci 0000:01:00.0: reg 0x10: [mem 0x8f000000-0x8f003fff 64bit] <6>[ 4.179034] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 4.179058] pci 0000:00:06.0: bridge window [mem 0x8f000000-0x8f0fffff] <6>[ 4.179298] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 4.179324] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 4.179348] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 4.179562] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 4.179582] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 4.179606] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <7>[ 4.179655] pci_bus 0000:00: on NUMA node 0 <6>[ 8.651349] Low-power S0 idle used by default for system suspend <6>[ 9.065771] ACPI: EC: interrupt unblocked <6>[ 9.065792] ACPI: EC: event unblocked <6>[ 9.065834] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 9.065853] ACPI: EC: GPE=0x6e <6>[ 9.065867] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 9.065893] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 9.066545] iommu: Default domain type: Translated <6>[ 9.066545] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 9.067195] SCSI subsystem initialized <7>[ 9.067547] libata version 3.00 loaded. <6>[ 9.067687] ACPI: bus type USB registered <6>[ 9.067793] usbcore: registered new interface driver usbfs <6>[ 9.067853] usbcore: registered new interface driver hub <6>[ 9.067952] usbcore: registered new device driver usb <6>[ 9.068766] efivars: Registered efivars operations <6>[ 9.069645] Advanced Linux Sound Architecture Driver Initialized. <6>[ 9.070256] PCI: Using ACPI for IRQ routing <7>[ 9.085466] PCI: pci_cache_line_size set to 64 bytes <6>[ 9.085892] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window <7>[ 9.086165] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 9.086178] e820: reserve RAM buffer [mem 0x67ebd000-0x67ffffff] <7>[ 9.086182] e820: reserve RAM buffer [mem 0x67f16000-0x67ffffff] <7>[ 9.086186] e820: reserve RAM buffer [mem 0x6ca3f000-0x6fffffff] <7>[ 9.086190] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 9.086573] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 9.086573] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 9.086573] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 9.086573] vgaarb: loaded <6>[ 9.087480] clocksource: Switched to clocksource tsc-early <6>[ 9.088680] pnp: PnP ACPI init <6>[ 9.089859] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 9.089884] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 9.090634] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 9.092445] system 00:03: [io 0x06a4] has been reserved <6>[ 9.092467] system 00:03: [io 0x06a0] has been reserved <6>[ 9.119825] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 9.119856] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 9.119883] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 9.119907] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 9.119933] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 9.119960] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 9.119987] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 9.120011] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 9.126795] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 9.128345] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 9.132998] pnp: PnP ACPI: found 8 devices <6>[ 9.145865] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 9.146197] NET: Registered PF_INET protocol family <6>[ 9.146520] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 9.149713] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 9.149945] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 9.149988] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 9.150290] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 9.151752] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 9.152195] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 9.152821] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 9.153501] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 9.153557] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 9.153583] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 9.153639] pci 0000:00:07.0: BAR 7: assigned [io 0x4000-0x4fff] <6>[ 9.153658] pci 0000:00:07.3: BAR 7: assigned [io 0x5000-0x5fff] <6>[ 9.153676] pci 0000:00:15.0: BAR 0: assigned [mem 0x501d2d9000-0x501d2d9fff 64bit] <6>[ 9.153737] pci 0000:00:15.1: BAR 0: assigned [mem 0x501d2da000-0x501d2dafff 64bit] <6>[ 9.153796] pci 0000:00:15.2: BAR 0: assigned [mem 0x501d2dc000-0x501d2dcfff 64bit] <6>[ 9.153854] pci 0000:00:15.3: BAR 0: assigned [mem 0x501d2dd000-0x501d2ddfff 64bit] <6>[ 9.153913] pci 0000:00:19.0: BAR 0: assigned [mem 0x501d2de000-0x501d2defff 64bit] <6>[ 9.153972] pci 0000:00:19.1: BAR 0: assigned [mem 0x501d2df000-0x501d2dffff 64bit] <6>[ 9.154030] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff] <6>[ 9.154090] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 9.154179] pci 0000:00:06.0: bridge window [mem 0x8f000000-0x8f0fffff] <6>[ 9.154277] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 9.154303] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 9.154323] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 9.154343] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 9.154374] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 9.154390] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 9.154409] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 9.154429] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 9.154456] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 9.154473] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 9.154490] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 9.154509] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 9.154527] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 9.154548] pci_bus 0000:01: resource 1 [mem 0x8f000000-0x8f0fffff] <6>[ 9.154565] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 9.154580] pci_bus 0000:02: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 9.154597] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 9.154618] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 9.154634] pci_bus 0000:2c: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 9.154651] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 9.156410] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 9.159131] PCI: CLS 0 bytes, default 64 <6>[ 9.159235] DMAR: No RMRR found <6>[ 9.159257] DMAR: No ATSR found <6>[ 9.159270] DMAR: IOMMU feature sc_support inconsistent <6>[ 9.159274] DMAR: dmar0: Using Queued invalidation <6>[ 9.159325] DMAR: dmar1: Using Queued invalidation <6>[ 9.160171] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 9.162091] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 9.162180] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 9.162269] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 9.162377] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 9.162476] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 9.162571] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 9.162662] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 9.162749] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 9.162836] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 9.162960] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 9.163033] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 9.163130] pci 0000:00:0e.0: Adding to iommu group 11 <6>[ 9.163234] pci 0000:00:12.0: Adding to iommu group 12 <6>[ 9.163363] pci 0000:00:14.0: Adding to iommu group 13 <6>[ 9.163437] pci 0000:00:14.2: Adding to iommu group 13 <6>[ 9.163606] pci 0000:00:15.0: Adding to iommu group 14 <6>[ 9.163682] pci 0000:00:15.1: Adding to iommu group 14 <6>[ 9.163761] pci 0000:00:15.2: Adding to iommu group 14 <6>[ 9.163836] pci 0000:00:15.3: Adding to iommu group 14 <6>[ 9.163967] pci 0000:00:16.0: Adding to iommu group 15 <6>[ 9.164044] pci 0000:00:16.3: Adding to iommu group 15 <6>[ 9.164179] pci 0000:00:19.0: Adding to iommu group 16 <6>[ 9.164258] pci 0000:00:19.1: Adding to iommu group 16 <6>[ 9.164447] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 9.164528] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 9.164611] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 9.164691] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 9.164778] pci 0000:00:1f.6: Adding to iommu group 17 <6>[ 9.164888] pci 0000:01:00.0: Adding to iommu group 18 <6>[ 9.186318] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 9.186338] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 9.186356] software IO TLB: mapped [mem 0x000000006355c000-0x000000006755c000] (64MB) <6>[ 9.186864] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 9.186886] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 9.186902] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 9.186918] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 9.186933] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 9.189145] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 9.189228] clocksource: Switched to clocksource tsc <6>[ 9.189372] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 9.203601] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 9.207195] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 9.214927] NET: Registered PF_ALG protocol family <6>[ 9.214960] xor: automatically using best checksumming function avx <6>[ 9.215046] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 9.215081] io scheduler mq-deadline registered <6>[ 9.215095] io scheduler kyber registered <6>[ 9.217423] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 9.219023] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 9.219237] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 9.221506] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 9.221687] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 9.226284] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0 <6>[ 9.226308] pci_bus 10000:e0: root bus resource [bus e0-ff] <6>[ 9.226328] pci_bus 10000:e0: root bus resource [mem 0x8e000000-0x8effffff] <6>[ 9.226350] pci_bus 10000:e0: root bus resource [mem 0x501b002000-0x501bffffff 64bit] <6>[ 9.237948] vmd 0000:00:0e.0: Bound to PCI domain 10000 <6>[ 9.238210] efifb: probing for efifb <6>[ 9.238245] efifb: framebuffer at 0x7c800000, using 20252k, total 20250k <6>[ 9.238265] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 9.238284] efifb: scrolling: redraw <6>[ 9.238295] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 9.241365] Console: switching to colour frame buffer device 360x112 <6>[ 9.243707] fb0: EFI VGA frame buffer device <7>[ 9.245919] Monitor-Mwait will be used to enter C-1 state <7>[ 9.245961] Monitor-Mwait will be used to enter C-2 state <7>[ 9.245987] Monitor-Mwait will be used to enter C-3 state <6>[ 9.245997] ACPI: \_SB_.PR08: Found 3 idle states <6>[ 9.252021] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 9.252334] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 9.253198] ACPI: button: Lid Switch [LID0] <6>[ 9.253372] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 9.253497] ACPI: button: Sleep Button [SLPB] <6>[ 9.253686] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 9.253877] ACPI: button: Power Button [PWRB] <6>[ 9.307845] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 9.307859] ACPI: thermal: Thermal Zone [TZ00] (34 C) <6>[ 9.308400] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 9.308838] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 9.309155] ACPI: battery: Slot [BAT0] (battery present) <6>[ 9.309447] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 9.310495] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 9.311739] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 9.312941] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <4>[ 9.313617] hpet_acpi_add: no address or irqs in _CRS <6>[ 9.313802] Non-volatile memory driver v1.3 <6>[ 9.313910] Linux agpgart interface v0.103 <6>[ 9.344480] ACPI: bus type drm_connector registered <6>[ 9.358382] loop: module loaded <6>[ 9.359303] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 9.359721] nvme nvme0: pci function 0000:01:00.0 <6>[ 9.360121] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 9.360191] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 9.361857] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 9.362577] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 9.362596] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 9.362614] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 9.362910] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 <6>[ 9.362934] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.362948] usb usb1: Product: xHCI Host Controller <6>[ 9.362958] usb usb1: Manufacturer: Linux 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ xhci-hcd <6>[ 9.362973] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 9.363795] hub 1-0:1.0: USB hub found <6>[ 9.363874] hub 1-0:1.0: 1 port detected <4>[ 9.365867] nvme nvme0: missing or invalid SUBNQN field. <6>[ 9.367926] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 <6>[ 9.367947] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.367961] usb usb2: Product: xHCI Host Controller <6>[ 9.367972] usb usb2: Manufacturer: Linux 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ xhci-hcd <6>[ 9.367988] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 9.368534] hub 2-0:1.0: USB hub found <6>[ 9.368611] hub 2-0:1.0: 4 ports detected <6>[ 9.370976] nvme nvme0: 15/0/0 default/read/poll queues <6>[ 9.380729] nvme0n1: p1 p2 <6>[ 9.384594] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 9.384619] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 9.386183] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 9.386741] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 9.386758] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 9.386776] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 9.386975] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 <6>[ 9.386992] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.387006] usb usb3: Product: xHCI Host Controller <6>[ 9.387016] usb usb3: Manufacturer: Linux 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ xhci-hcd <6>[ 9.387032] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 9.387527] hub 3-0:1.0: USB hub found <6>[ 9.387574] hub 3-0:1.0: 12 ports detected <6>[ 9.407020] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 <6>[ 9.407040] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.407054] usb usb4: Product: xHCI Host Controller <6>[ 9.407064] usb usb4: Manufacturer: Linux 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ xhci-hcd <6>[ 9.407089] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 9.407486] hub 4-0:1.0: USB hub found <6>[ 9.407522] hub 4-0:1.0: 2 ports detected <6>[ 9.410343] usbcore: registered new interface driver usb-storage <6>[ 9.410542] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 9.410555] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 10.111493] i8042: Can't read CTR while initializing i8042 <4>[ 10.111518] i8042: probe of i8042 failed with error -5 <6>[ 10.111891] mousedev: PS/2 mouse device common for all mice <6>[ 10.112717] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 10.114317] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 10.114507] rtc_cmos rtc_cmos: setting system clock to 1998-06-01T20:46:12 UTC (896733972) <6>[ 10.114746] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 10.114944] IR JVC protocol handler initialized <6>[ 10.114964] IR MCE Keyboard/mouse protocol handler initialized <6>[ 10.114988] IR NEC protocol handler initialized <6>[ 10.115004] IR RC5(x/sz) protocol handler initialized <6>[ 10.115781] IR RC6 protocol handler initialized <6>[ 10.116445] IR SANYO protocol handler initialized <6>[ 10.116800] IR Sharp protocol handler initialized <6>[ 10.117143] IR Sony protocol handler initialized <6>[ 10.117433] IR XMP protocol handler initialized <6>[ 10.120746] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 10.121052] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 10.121474] device-mapper: uevent: version 1.0.3 <6>[ 10.121979] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 10.122363] intel_pstate: Intel P-state driver initializing <6>[ 10.128481] intel_pstate: HWP enabled <6>[ 10.128847] sdhci: Secure Digital Host Controller Interface driver <6>[ 10.129199] sdhci: Copyright(c) Pierre Ossman <6>[ 10.132426] pstore: Using crash dump compression: deflate <6>[ 10.133218] pstore: Registered efi_pstore as persistent store backend <6>[ 10.133986] hid: raw HID events driver (C) Jiri Kosina <6>[ 10.135390] usbcore: registered new interface driver usbhid <6>[ 10.136004] usbhid: USB HID core driver <6>[ 10.136948] pci 0000:00:08.0: Setting to D3hot <6>[ 10.149712] pci 0000:00:05.0: Setting to D3hot <6>[ 10.162957] pci 0000:00:0b.0: Setting to D3hot <6>[ 10.176421] pci 0000:00:14.2: enabling device (0000 -> 0002) <4>[ 10.176798] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 10.177631] intel_pmc_core INT33A1:00: initialized <6>[ 10.179256] intel_rapl_msr: PL4 support detected. <6>[ 10.180510] intel_rapl_common: Found RAPL domain package <6>[ 10.180809] intel_rapl_common: Found RAPL domain core <6>[ 10.181729] intel_rapl_common: Found RAPL domain uncore <6>[ 10.182950] intel_rapl_common: Found RAPL domain psys <6>[ 10.189568] Initializing XFRM netlink socket <6>[ 10.190849] NET: Registered PF_INET6 protocol family <6>[ 10.194176] Segment Routing with IPv6 <6>[ 10.195159] In-situ OAM (IOAM) with IPv6 <6>[ 10.196136] mip6: Mobile IPv6 <6>[ 10.197037] NET: Registered PF_PACKET protocol family <6>[ 10.198393] NET: Registered PF_KEY protocol family <6>[ 10.212970] microcode: Microcode Update Driver: v2.2. <6>[ 10.213333] IPI shorthand broadcast: enabled <6>[ 10.215368] AVX2 version of gcm_enc/dec engaged. <6>[ 10.217901] AES CTR mode by8 optimization enabled <6>[ 10.233404] sched_clock: Marking stable (10224002647, 9070726)->(10310122278, -77048905) <6>[ 10.234532] registered taskstats version 1 <6>[ 10.244703] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 10.247012] Btrfs loaded, zoned=no, fsverity=no <6>[ 10.248927] clk: Disabling unused clocks <6>[ 10.249512] ALSA device list: <6>[ 10.249880] No soundcards found. <6>[ 10.250421] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 10.268464] EXT4-fs (nvme0n1p2): mounted filesystem 9fe6343d-53a8-4ecc-a3ac-565675bd42c9 ro with ordered data mode. Quota mode: disabled. <6>[ 10.268814] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 10.269478] devtmpfs: mounted <6>[ 10.271004] Freeing unused kernel image (initmem) memory: 2616K <6>[ 10.271558] Write protecting the kernel read-only data: 22528k <6>[ 10.272959] Freeing unused kernel image (rodata/data gap) memory: 472K <6>[ 10.273311] Run /sbin/init as init process <7>[ 10.273591] with arguments: <7>[ 10.273592] /sbin/init <7>[ 10.273592] 3 <7>[ 10.273593] with environment: <7>[ 10.273594] HOME=/ <7>[ 10.273595] TERM=linux <7>[ 10.273596] BOOT_IMAGE=/boot/drm_intel <6>[ 10.333466] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 10.349375] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 10.350488] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 10.351600] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 10.352738] usb 4-1: Manufacturer: Realtek <6>[ 10.353889] usb 4-1: SerialNumber: 000001 <7>[ 10.360991] systemd[1]: System time before build time, advancing clock. <7>[ 10.411947] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 10.412659] systemd[1]: Detected architecture x86-64. <7>[ 10.429880] systemd[1]: Set hostname to . <6>[ 10.485513] cat (195) used greatest stack depth: 12664 bytes left <6>[ 10.486704] friendly-recove (191) used greatest stack depth: 11944 bytes left <6>[ 10.489327] mkdir (199) used greatest stack depth: 11672 bytes left <7>[ 10.611593] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 10.611914] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 10.613296] systemd[1]: Created slice system-modprobe.slice. <7>[ 10.616049] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 10.618774] systemd[1]: Created slice User and Session Slice. <7>[ 10.621180] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 10.623600] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 10.623940] systemd[1]: Reached target Remote File Systems. <7>[ 10.626320] systemd[1]: Reached target Slices. <7>[ 10.628734] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 10.631188] systemd[1]: Listening on Syslog Socket. <7>[ 10.633676] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 10.636068] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 10.647964] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 10.648556] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 10.651030] systemd[1]: Listening on Journal Socket. <7>[ 10.653588] systemd[1]: Listening on udev Control Socket. <7>[ 10.655977] systemd[1]: Listening on udev Kernel Socket. <7>[ 10.669366] systemd[1]: Mounting Huge Pages File System... <7>[ 10.673546] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 10.677785] systemd[1]: Mounting Kernel Debug File System... <7>[ 10.682081] systemd[1]: Mounting Kernel Trace File System... <7>[ 10.686799] systemd[1]: Starting Journal Service... <7>[ 10.690975] systemd[1]: Starting Set the console keyboard layout... <7>[ 10.695593] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 10.698131] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 10.698952] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 10.701356] systemd[1]: Starting File System Check on Root Device... <7>[ 10.708179] systemd[1]: Starting Load Kernel Modules... <7>[ 10.712527] systemd[1]: Starting udev Coldplug all Devices... <7>[ 10.716836] systemd[1]: Starting Uncomplicated firewall... <7>[ 10.720963] systemd[1]: Mounted Huge Pages File System. <7>[ 10.724060] systemd[1]: Mounted POSIX Message Queue File System. <7>[ 10.726848] systemd[1]: Mounted Kernel Debug File System. <7>[ 10.729607] systemd[1]: Mounted Kernel Trace File System. <7>[ 10.733012] systemd[1]: Finished Create list of static device nodes for the current kernel. <7>[ 10.740272] systemd[1]: Started Journal Service. <6>[ 10.819463] EXT4-fs (nvme0n1p2): re-mounted 9fe6343d-53a8-4ecc-a3ac-565675bd42c9 r/w. Quota mode: disabled. <6>[ 10.855035] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 10.874893] systemd-journald[220]: Received client request to flush runtime journal. <5>[ 10.879998] systemd-journald[220]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 11.175535] pps_core: LinuxPPS API ver. 1 registered <6>[ 11.175542] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 11.180114] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 11.183887] PTP clock support registered <6>[ 11.186407] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 11.186530] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 11.211804] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 11.211810] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 11.215363] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 11.310273] i2c i2c-0: 8/8 memory slots populated (from DMI) <4>[ 11.310279] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD <6>[ 11.323377] usbcore: registered new device driver r8152-cfgselector <6>[ 11.352287] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 11.352396] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <3>[ 11.358373] snd_hda_intel 0000:00:1f.3: no codecs found! <6>[ 11.366112] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 11.393783] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 11.457430] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 11.458257] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 11.458291] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 11.458423] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 11.460143] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 11.480326] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 11.503431] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 11.528339] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 11.528504] usbcore: registered new interface driver r8152 <6>[ 11.535397] usbcore: registered new interface driver cdc_ether <6>[ 11.537843] usbcore: registered new interface driver r8153_ecm <6>[ 11.541785] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 11.584561] r8152 4-1:1.0 enx00e04c6814c9: renamed from eth0 <4>[ 11.616751] ********************************************************** <4>[ 11.616753] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 11.616754] ** ** <4>[ 11.616755] ** trace_printk() being used. Allocating extra memory. ** <4>[ 11.616755] ** ** <4>[ 11.616756] ** This means that this is a DEBUG kernel and it is ** <4>[ 11.616757] ** unsafe for production use. ** <4>[ 11.616758] ** ** <4>[ 11.616759] ** If you see this message and you are not debugging ** <4>[ 11.616760] ** the kernel, report this immediately to your vendor! ** <4>[ 11.616761] ** ** <4>[ 11.616761] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 11.616762] ********************************************************** <6>[ 11.628118] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 11.669060] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 11.669447] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <6>[ 11.669590] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - HuC is not supported! <7>[ 11.669608] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 11.669732] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 11.669868] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 11.669980] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 11.670127] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 11.670317] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 11.670439] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 11.671082] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 11.671179] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 11.671784] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 11.671874] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 11.672482] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 11.672578] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 11.672663] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 11.672743] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 11.673623] Console: switching to colour dummy device 80x25 <6>[ 11.675472] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 11.675680] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 11.675696] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000080400947 <7>[ 11.675878] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 61440K <7>[ 11.676119] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 11.676268] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 11.676826] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6fe09018 <7>[ 11.677015] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 11.677150] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 11.677258] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 11.677361] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 11.677468] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 11.677588] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 11.677688] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 11.677776] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 11.677861] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 11.677993] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 11.678126] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 11.678252] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 11.678373] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 11.678496] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 11.678614] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 11.678727] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 11.678835] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 11.678940] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 11.679044] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 11.679371] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 11.679500] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 11.679621] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 11.679743] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 11.679862] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 11.679979] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 11.680345] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 11.680467] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 11.680583] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 11.680694] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 11.680802] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 11.680908] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 11.681013] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 11.681141] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 11.681246] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 11.681358] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 11.681473] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 11.681857] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 11.681973] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 253 <7>[ 11.682101] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 11.682213] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 11.682323] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 11.682435] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 11.682553] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 11.682667] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 11.682777] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 11.682891] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 11.683003] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 11.683123] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 11.683226] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 78) <7>[ 11.683333] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 11.683436] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 11.683538] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 11.683638] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 11.683738] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 253 not known; assuming 39 <7>[ 11.683837] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 11.683937] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 11.684037] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 11.684152] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 11.684257] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 11.684360] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 11.684462] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 11.684562] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 11.684663] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 11.684760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 11.684859] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 11.684960] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 11.685060] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 11.685175] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 11.685304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 11.685522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 11.685676] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 11.685882] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 11.686093] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 11.686238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 11.686348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 11.686455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 11.686613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 11.686730] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 11.686745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 11.686865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 11.686971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 11.687087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 11.687291] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 11.688254] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 11.689133] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 11.689338] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 11.689498] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 78 (78.0 usec) <7>[ 11.689638] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 79 (79.0 usec) <7>[ 11.689823] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 105 (105.0 usec) <7>[ 11.689965] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 106 (106.0 usec) <7>[ 11.690233] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 154 (154.0 usec) <6>[ 11.699900] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.17) <7>[ 11.703170] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 11.704820] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 11.705524] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 11.705653] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 11.705801] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 11.705931] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 11.706083] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 11.706208] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 11.706333] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 11.706465] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 11.706581] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 11.706696] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 11.706806] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 11.706911] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 11.707015] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 11.707148] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 11.707337] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 11.707453] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 11.707554] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 11.707654] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 11.707748] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 11.707967] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 11.708225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 11.709324] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 11.709548] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 11.711685] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 11.712398] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 11.712965] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 11.713657] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 11.714930] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 11.717223] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <6>[ 11.720104] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <7>[ 11.724206] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 11.724221] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 11.724224] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 11.724262] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 11.724954] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 11.725625] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 11.725813] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 11.725966] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 11.726118] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 11.726219] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 11.726313] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 11.726403] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 11.726500] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 11.726659] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 11.726905] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 11.727015] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 11.727278] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 11.727371] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 11.727534] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 11.727796] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 11.727979] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 11.728188] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 11.728357] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 11.728594] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 11.728709] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 11.728804] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 11.728937] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 11.729104] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 11.729270] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 11.729487] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 11.729644] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 11.729807] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 11.730337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 11.730539] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 11.730724] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 11.730942] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 11.731122] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 11.731275] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 11.731380] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 11.731481] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 11.731580] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 11.731680] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 11.731777] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 11.731872] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 11.731966] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 11.732060] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 11.732172] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 11.732273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 11.732376] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 11.732478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 11.732580] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 11.732670] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 11.732760] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 11.732852] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 11.732946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 11.733038] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 11.733142] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 11.733234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 11.733325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 11.733419] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 11.733905] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 11.734041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 11.734164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 11.734261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 11.734361] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 11.734460] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 11.734552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 11.734659] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 11.734764] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 11.734855] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 11.734944] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 11.735044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 11.735165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 11.735322] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 11.735434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 11.735542] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 11.735645] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 11.735737] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 11.735825] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 11.735912] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 11.736002] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 11.736133] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 11.736238] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 11.736333] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 11.736428] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 11.736530] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 11.736627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 11.736807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 11.736916] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 11.737016] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 11.737125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 11.737226] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 11.737330] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 11.737431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 11.737596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 11.737698] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 11.737788] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 11.737876] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 11.737962] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 11.738048] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 11.738152] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 11.738283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 11.738396] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 11.738505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 11.738610] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 11.738716] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 11.738820] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 11.738916] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 11.739039] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 11.739156] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 11.739255] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 11.739357] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 11.739461] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 11.739561] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 11.739664] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 11.739791] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 11.739888] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 11.739977] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 11.740065] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 11.740174] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 11.740267] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 11.740362] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 11.740659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 11.740791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 11.740904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 11.741011] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 11.741134] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 11.741240] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 11.741353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 11.741464] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 11.741580] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 11.741691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 11.741801] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 11.741911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 11.742025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 11.742148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 11.742253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 11.742367] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 11.742482] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 11.742590] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 11.742697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 11.742796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 11.742894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 11.742992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 11.743104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 11.743205] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 11.743325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 11.743436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 11.743545] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 11.743653] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 11.743754] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 11.743856] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 11.743960] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 11.744060] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 11.744174] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 11.744279] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 11.744386] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 11.744495] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 11.744603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 11.744708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 11.744805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 11.745123] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 11.745240] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 11.745351] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 11.745461] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 11.745787] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fc000000, pitch 11520, size 0x13c6800 <7>[ 11.745898] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 11.759876] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 11.769417] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 11.769544] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7>[ 11.769634] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 11.769751] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 11.769753] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 11.769754] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 11.769760] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 GT workarounds on global <7>[ 11.770692] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 engine workarounds on rcs'0 <7>[ 11.770795] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on rcs'0 <7>[ 11.770889] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 context workarounds on rcs'0 <7>[ 11.771503] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 engine workarounds on bcs'0 <7>[ 11.771605] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 11.772119] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 engine workarounds on ccs'0 <7>[ 11.772220] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 11.773248] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 11.773378] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 11.773500] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 11.788887] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 11.789136] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x400000 <7>[ 11.789297] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 11.789447] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 11.789600] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 11.789753] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 11.789902] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 11.790054] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 11.790241] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 11.790376] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 11.790489] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 11.790599] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 11.790708] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 11.790815] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 11.791531] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.13.1 <7>[ 11.809130] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 15ms, freq = 1400MHz, before = 1250MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 11.810005] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 11.811414] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 11.811418] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 11.811895] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 11.823518] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 11.823534] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 GT workarounds on global <7>[ 11.825277] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 11.825476] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 11.827433] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 11.827623] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 11.829815] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 11.830019] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 11.832121] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 11.832313] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 11.837485] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 11.837639] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 11.837772] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 11.854912] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 11.855097] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x600000 <7>[ 11.855240] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 11.855353] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 11.855463] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 11.855568] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 11.855669] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 11.855769] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 11.855867] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 11.855966] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 11.856063] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 11.856191] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 11.856305] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 11.856403] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 11.856502] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <6>[ 11.858098] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 11.858531] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.13.1 <6>[ 11.858534] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 11.876107] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 16ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 11.876504] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 11.885088] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 11.885904] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 11.885908] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 11.886139] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 11.893761] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7>[ 11.894057] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed other'6 to gsc0 <7>[ 11.894364] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7>[ 11.894603] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7>[ 11.894848] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7>[ 11.895087] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7>[ 11.895306] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed ccs'0 to ccs0 <7>[ 11.895675] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 11.896298] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 11.896712] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 11.897145] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 11.897559] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:235:DDI A/PHY A][CRTC:80:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 11.897885] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 11.898211] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 11.898517] i915 0000:00:02.0: [drm:intel_dp_audio_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 11.898821] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 11.899228] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 11.899570] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 11.899951] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 11.900330] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 11.900686] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 11.901089] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 11.901440] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 11.901856] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 11.902196] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4004 - 4096), size 0 -> 92 <7>[ 11.902513] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 11.902823] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.903144] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.903452] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.903754] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 11.904048] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.904380] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.904675] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.904952] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 11.905246] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.905493] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.905734] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.905975] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 11.906244] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.906484] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.906712] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.906936] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 11.907171] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.907394] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.907624] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.907854] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 11.908093] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.908316] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 11.908540] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 11.908818] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 11.908824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 11.909109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 11.909378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 11.909634] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 11.909872] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 11.910115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 11.910347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 11.910576] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 11.910804] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 11.911012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 11.911238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 11.911449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 11.911658] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 11.911661] i915 0000:00:02.0: pixelformat: RGB <7>[ 11.911663] i915 0000:00:02.0: colorimetry: sRGB <7>[ 11.911665] i915 0000:00:02.0: bpc: 0 <7>[ 11.911668] i915 0000:00:02.0: dynamic range: VESA range <7>[ 11.911670] i915 0000:00:02.0: content type: Not defined <7>[ 11.911672] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 11.911878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 11.912058] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 11.912254] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 11.912434] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 11.912611] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 11.912787] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 11.912963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 11.913148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 11.913323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 11.913488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 11.913643] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 11.913821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 11.913982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 11.914149] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 11.914304] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 11.914455] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 11.914606] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 11.914750] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 11.914881] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 11.915012] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 11.915183] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 11.915321] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 11.915455] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 11.915587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 11.915725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 11.915859] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 11.915980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 11.916110] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 11.916234] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 11.916764] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6>[ 12.046440] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.0.0.1655, svn 1) <6>[ 12.067021] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 12.122168] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 12.122946] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 12.137128] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 12.137568] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 12.137990] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 12.189118] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 12.189562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 12.190597] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 12.191011] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 12.191396] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 12.191722] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 12.192037] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 12.192376] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 12.192679] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 12.192973] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 12.193292] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 12.193585] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 12.193881] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 12.194201] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 12.194494] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 12.194784] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 12.195066] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 12.195389] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 12.195687] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 12.195972] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 12.196275] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 12.196567] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 12.196853] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 12.197156] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 12.197431] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 12.197752] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 12.198279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 12.200040] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 12.200450] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7>[ 12.531170] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 12.834643] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 12.835186] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 12.835629] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 12.836053] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 13.037115] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 13.038779] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 13.039250] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 13.042660] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 13.043475] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 13.045045] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 13.046906] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 13.047809] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 13.050045] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 13.050452] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 13.052985] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 13.053407] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 13.054397] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 13.055255] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 13.055618] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 13.056036] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 13.066264] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 13.067164] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 13.067628] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 13.069229] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 13.070176] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 13.071051] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 13.071435] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 13.071760] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 13.072069] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 13.072419] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 13.072764] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 13.086701] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 13.087068] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 13.088252] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 13.088625] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 13.089281] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 13.089554] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 13.089846] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 13.090495] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 13.090763] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 13.091145] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 13.091645] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 13.091935] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 13.092476] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 13.092509] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7>[ 13.094148] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 13.102605] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 13.104670] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <7>[ 13.105658] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 13.105794] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 13.106132] i915 display info: display version: 14 <7>[ 13.106134] i915 display info: cursor_needs_physical: no <7>[ 13.106134] i915 display info: has_cdclk_crawl: yes <7>[ 13.106135] i915 display info: has_cdclk_squash: yes <7>[ 13.106136] i915 display info: has_ddi: yes <7>[ 13.106137] i915 display info: has_dp_mst: yes <7>[ 13.106138] i915 display info: has_dsb: yes <7>[ 13.106139] i915 display info: has_fpga_dbg: yes <7>[ 13.106140] i915 display info: has_gmch: no <7>[ 13.106140] i915 display info: has_hotplug: yes <7>[ 13.106141] i915 display info: has_hti: no <7>[ 13.106142] i915 display info: has_ipc: yes <7>[ 13.106143] i915 display info: has_overlay: no <7>[ 13.106144] i915 display info: has_psr: yes <7>[ 13.106145] i915 display info: has_psr_hw_tracking: no <7>[ 13.106146] i915 display info: overlay_needs_physical: no <7>[ 13.106147] i915 display info: supports_tv: no <7>[ 13.106148] i915 display info: has_hdcp: yes <7>[ 13.106149] i915 display info: has_dmc: yes <7>[ 13.106150] i915 display info: has_dsc: yes <7>[ 13.106317] [drm:drm_client_modeset_probe] <7>[ 13.106425] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 13.106548] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 13.106550] i915 device info: graphics version: 12.71 <7>[ 13.106551] i915 device info: media version: 13 <7>[ 13.106552] i915 device info: graphics stepping: B0 <7>[ 13.106553] i915 device info: media stepping: C0 <7>[ 13.106554] i915 device info: display stepping: C0 <7>[ 13.106554] i915 device info: base die stepping: ** <7>[ 13.106556] i915 device info: gt: 0 <7>[ 13.106556] i915 device info: memory-regions: 0x41 <7>[ 13.106557] i915 device info: page-sizes: 0x211000 <7>[ 13.106558] i915 device info: platform: METEORLAKE <7>[ 13.106559] i915 device info: ppgtt-size: 48 <7>[ 13.106560] i915 device info: ppgtt-type: 2 <7>[ 13.106562] i915 device info: dma_mask_size: 46 <7>[ 13.106563] i915 device info: is_mobile: no <7>[ 13.106564] i915 device info: is_lp: no <7>[ 13.106564] i915 device info: require_force_probe: no <7>[ 13.106565] i915 device info: is_dgfx: no <7>[ 13.106566] i915 device info: has_64bit_reloc: yes <7>[ 13.106567] i915 device info: has_64k_pages: no <7>[ 13.106568] i915 device info: gpu_reset_clobbers_display: no <7>[ 13.106568] i915 device info: has_reset_engine: yes <7>[ 13.106569] i915 device info: has_3d_pipeline: yes <7>[ 13.106570] i915 device info: has_flat_ccs: no <7>[ 13.106571] i915 device info: has_global_mocs: yes <7>[ 13.106572] i915 device info: has_gmd_id: yes <7>[ 13.106573] i915 device info: has_gt_uc: yes <7>[ 13.106574] i915 device info: has_heci_pxp: no <7>[ 13.106574] i915 device info: has_heci_gscfi: no <7>[ 13.106575] i915 device info: has_guc_deprivilege: yes <7>[ 13.106576] i915 device info: has_guc_tlb_invalidation: yes <7>[ 13.106577] i915 device info: has_l3_ccs_read: no <7>[ 13.106578] i915 device info: has_l3_dpf: no <7>[ 13.106579] i915 device info: has_llc: no <7>[ 13.106580] i915 device info: has_logical_ring_contexts: yes <7>[ 13.106580] i915 device info: has_logical_ring_elsq: yes <7>[ 13.106581] i915 device info: has_media_ratio_mode: no <7>[ 13.106582] i915 device info: has_mslice_steering: no <7>[ 13.106583] i915 device info: has_oa_bpc_reporting: yes <7>[ 13.106584] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 13.106585] i915 device info: has_oam: yes <7>[ 13.106586] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 13.106586] i915 device info: has_pxp: yes <7>[ 13.106587] i915 device info: has_rc6: yes <7>[ 13.106588] i915 device info: has_rc6p: no <7>[ 13.106589] i915 device info: has_rps: yes <7>[ 13.106589] i915 device info: has_runtime_pm: yes <7>[ 13.106590] i915 device info: has_snoop: yes <7>[ 13.106591] i915 device info: has_coherent_ggtt: no <7>[ 13.106593] i915 device info: tuning_thread_rr_after_dep: no <7>[ 13.106594] i915 device info: unfenced_needs_alignment: no <7>[ 13.106595] i915 device info: hws_needs_physical: no <7>[ 13.106596] i915 device info: has_pooled_eu: no <7>[ 13.106597] i915 device info: rawclk rate: 38400 kHz <7>[ 13.106598] i915 device info: iommu: enabled <7>[ 13.106599] i915 device info: available engines: 400003 <7>[ 13.106601] i915 device info: subslice total: 8 <7>[ 13.106602] i915 device info: geometry dss mask=00000000,000000ff <7>[ 13.106603] i915 device info: compute dss mask=00000000,000000ff <7>[ 13.106604] i915 device info: EU total: 128 <7>[ 13.106605] i915 device info: EU per subslice: 16 <7>[ 13.106606] i915 device info: has slice power gating: no <7>[ 13.106607] i915 device info: has subslice power gating: no <7>[ 13.106608] i915 device info: has EU power gating: no <7>[ 13.106608] i915 device info: available engines: 4041400 <7>[ 13.106609] i915 device info: subslice total: 8 <7>[ 13.106610] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 13.106611] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 13.106612] i915 device info: EU total: 128 <7>[ 13.106613] i915 device info: EU per subslice: 16 <7>[ 13.106614] i915 device info: has slice power gating: no <7>[ 13.106614] i915 device info: has subslice power gating: no <7>[ 13.106615] i915 device info: has EU power gating: no <6>[ 13.106616] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 13.106617] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 13.106618] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 13.106694] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] <7>[ 13.106725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 13.108838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 13.110121] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 13.110467] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 13.110808] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 13.111180] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 13.111726] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 13.111731] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 13.111733] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 13.111752] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 13.111869] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 13.112758] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 13.112859] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 13.113539] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 13.113818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes : <7>[ 13.113822] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 13.113826] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] <7>[ 13.113829] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 13.113993] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 13.113999] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected <7>[ 13.114002] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7>[ 13.114004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 13.114171] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 13.114176] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 13.114178] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] <7>[ 13.114180] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 13.114358] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 13.114362] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] disconnected <7>[ 13.114364] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] <7>[ 13.114366] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 13.114516] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 13.114520] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 13.114522] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] <7>[ 13.114524] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 13.114664] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 13.114668] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] disconnected <7>[ 13.114670] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] <7>[ 13.114672] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 13.114810] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 13.114814] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] disconnected <7>[ 13.114815] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 13.114818] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 13.114819] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 13.114820] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 13.114822] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 13.114823] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 13.114824] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 13.114867] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 13.114876] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 13.114878] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 13.114880] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 13.114881] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 13.114887] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 13.114920] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 13.114942] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 13.121537] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01e00000 <6>[ 13.122064] fbcon: i915drmfb (fb0) is primary device <7>[ 13.122669] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 13.122808] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:235:DDI A/PHY A][CRTC:80:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 13.122920] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 13.123019] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 13.123135] i915 0000:00:02.0: [drm:intel_dp_audio_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 13.123234] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 13.123348] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 13.123480] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4004), size 0 -> 4004 <7>[ 13.123587] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 13.123686] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 14, 14, 18, 18, 27, 0, 0, 0, 3, 0 <7>[ 13.123784] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 337, 337, 433, 433, 649, 0, 0, 63, 73, 87 <7>[ 13.123879] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 372, 372, 478, 478, 715, 0, 0, 64, 82, 88 <7>[ 13.123974] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 13.124105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 13.124216] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 13.124323] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 13.124428] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 13.124531] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 13.124644] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 13.124761] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 13.124869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 13.124972] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 13.125087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 13.125193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 13.125295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 13.125396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 13.125496] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 13.125596] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 13.125700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 13.125802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 13.125902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 13.126002] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 13.126004] i915 0000:00:02.0: pixelformat: RGB <7>[ 13.126004] i915 0000:00:02.0: colorimetry: sRGB <7>[ 13.126005] i915 0000:00:02.0: bpc: 0 <7>[ 13.126006] i915 0000:00:02.0: dynamic range: VESA range <7>[ 13.126007] i915 0000:00:02.0: content type: Not defined <7>[ 13.126008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 13.126119] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 13.126219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 13.126317] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 13.126415] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 13.126513] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 13.126612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 13.126709] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 13.126805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 13.126902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 13.126998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 13.127108] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 13.127221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 13.127327] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 13.127430] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 13.127531] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 13.127631] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 13.127730] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 13.127828] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 13.127926] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 13.128024] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 13.128135] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 13.128233] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 13.128330] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 13.128430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 13.128531] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 13.128629] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 13.128727] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 13.128823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 13.128918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 13.129013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 13.129123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 13.129514] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x2000071 0x13421c72) <7>[ 13.129647] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 13.129752] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 13.129849] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 13.129944] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 13.130036] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 13.130146] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 13.130238] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 13.130328] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 13.130416] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 13.130503] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 13.130593] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 13.130682] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 13.130771] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 13.130858] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 13.130945] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 13.131034] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 13.131138] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 13.131224] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 13.131309] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 13.131396] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 13.131482] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 13.131566] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 13.132872] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 13.134351] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 13.134504] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 13.135782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 13.136066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 13.136324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 13.136470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <6>[ 13.136814] Console: switching to colour frame buffer device 360x112 <6>[ 13.145618] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 13.166390] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7>[ 13.166431] [drm:drm_client_modeset_probe] <7>[ 13.166613] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] <7>[ 13.166637] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 13.168035] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 13.168968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 13.169157] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 13.169324] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 13.169483] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 13.169741] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 13.169747] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 13.169750] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 13.169773] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 13.169923] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 13.170975] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 13.171133] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 13.171962] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes : <7>[ 13.171973] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 13.171979] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] <7>[ 13.171983] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 13.172226] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected <7>[ 13.172230] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7>[ 13.172234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 13.172410] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 13.172412] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] <7>[ 13.172415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 13.172632] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] disconnected <7>[ 13.172635] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] <7>[ 13.172638] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 13.172821] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 13.172823] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] <7>[ 13.172826] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 13.172999] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] disconnected <7>[ 13.173002] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] <7>[ 13.173004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 13.173199] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] disconnected <7>[ 13.173201] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 13.173204] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 13.173205] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 13.173206] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 13.173208] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 13.173209] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 13.173211] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 13.173275] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 13.173288] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 13.173290] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 13.173292] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 13.173293] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 13.173313] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 13.177507] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7>[ 13.177512] [drm:drm_client_modeset_probe] <7>[ 13.177536] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] <7>[ 13.177541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 13.181235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 13.181909] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 13.182023] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 13.182148] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 13.182253] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 13.182371] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 13.182376] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 13.182379] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 13.182389] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 13.182489] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 13.183359] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 13.183461] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 13.184167] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes : <7>[ 13.184171] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 13.184176] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] <7>[ 13.184181] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 13.184315] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected <7>[ 13.184318] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7>[ 13.184321] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 13.184442] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 13.184445] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] <7>[ 13.184447] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 13.184580] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] disconnected <7>[ 13.184582] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] <7>[ 13.184585] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 13.184719] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 13.184721] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] <7>[ 13.184724] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 13.184855] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] disconnected <7>[ 13.184857] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] <7>[ 13.184860] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 13.184988] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] disconnected <7>[ 13.184990] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 13.184992] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 13.184994] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 13.184995] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 13.184997] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 13.184998] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 13.185000] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 13.185018] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 13.185024] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 13.185025] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 13.185027] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 13.185028] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 13.185036] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 13.240060] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 13.240607] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <6>[ 14.227570] r8152 4-1:1.0 enx00e04c6814c9: carrier on <7>[ 16.227159] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 16.227754] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 16.228218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 16.228826] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 16.229251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 17.189922] systemd-udevd (271) used greatest stack depth: 11216 bytes left <7>[ 18.187436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 18.188002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 18.210129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 18.210554] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 18.210796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <5>[ 21.672479] systemd-journald[220]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 21.694172] systemd-journald[220]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 21.932326] fuse: init (API version 7.39)