Results for igt@kms_force_connector_basic@force-edid

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.28-g453b9df12 (x86_64) (Linux: 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ x86_64)
Out 
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.025s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.025s)
Dmesg
<6> [111.960693] Console: switching to colour dummy device 80x25
<6> [111.961068] [IGT] kms_force_connector_basic: executing
<7> [111.965518] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [111.965989] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [111.966157] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [111.966784] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [111.966792] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [111.966798] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [111.967143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [111.967279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [111.967578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [111.967748] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [111.967754] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [111.967892] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [111.970737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [111.970742] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [111.970868] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [111.970898] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [111.970903] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [111.971530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [111.971650] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [111.971974] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [111.972126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [111.972130] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [111.972264] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [111.975091] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [111.975096] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [111.975245] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [111.975377] [drm:status_store] [CONNECTOR:104:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [111.975383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]
<7> [111.975388] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [111.988435] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [111.988441] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [111.988656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [111.988778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [111.989077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [111.989226] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [111.989259] i915 0000:00:02.0: [drm:do_detailed_mode] [CONNECTOR:104:HDMI-A-2] reducing hsync_end 2100->2092
<7> [111.989439] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [111.989443] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [111.989448] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2092 2092 1080 1082 1087 1115 0x40 0x9
<7> [111.989452] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [111.989455] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [111.989459] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [111.989463] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [111.989466] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [111.989470] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [111.989473] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [111.989477] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [111.989480] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [111.989484] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [111.989513] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]
<7> [111.989517] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [112.002868] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [112.002874] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [112.003089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [112.003235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.003535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [112.003670] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [112.003698] i915 0000:00:02.0: [drm:do_detailed_mode] [CONNECTOR:104:HDMI-A-2] reducing hsync_end 2100->2092
<7> [112.003909] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [112.003914] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [112.003918] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2092 2092 1080 1082 1087 1115 0x40 0x9
<7> [112.003921] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [112.003924] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [112.003928] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [112.003931] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [112.003934] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [112.003937] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [112.003940] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.003945] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.003950] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.003955] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [112.004123] [drm:status_store] [CONNECTOR:115:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [112.004130] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]
<7> [112.004134] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [112.004476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [112.004601] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [112.004901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [112.005035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [112.005039] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.005190] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [112.008019] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [112.008024] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [112.008146] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [112.008188] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]
<7> [112.008193] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [112.008518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [112.008636] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [112.008933] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [112.009065] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [112.009069] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.009193] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [112.012001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [112.012006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [112.012128] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [112.012174] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [112.012189] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.012513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.012632] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.012928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.013061] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.013064] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.013195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.016000] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.016004] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.016123] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<6> [112.016469] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [112.016596] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [112.016602] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [112.016606] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.016937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.017056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.017369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.017503] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.017511] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.017628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.020462] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.020471] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.020590] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from disconnected to connected
<7> [112.020726] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] probed modes :
<7> [112.020730] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.020735] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.020739] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.020743] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [112.020747] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [112.020781] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [112.020785] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.021118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.021276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.021575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.021708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.021716] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.021834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.024653] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.024662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.024851] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] probed modes :
<7> [112.024854] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.024858] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.024862] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.024865] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [112.024868] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [112.027652] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:95:HDMI-A-1] EDID override set
<7> [112.027674] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [112.027679] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.027989] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:HDMI-A-1] ELD monitor IGT
<7> [112.027993] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:HDMI-A-1] ELD size 24, SAD count 0
<7> [112.028215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [112.028342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.028641] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [112.028775] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [112.028870] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.028875] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [112.028881] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [112.028885] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [112.028890] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] probed modes :
<7> [112.028893] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [112.028897] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [112.028900] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.028903] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.028906] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [112.029004] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:HDMI-A-1] EDID override reset
<7> [112.029076] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [112.029080] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.029437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.029557] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.029856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.029990] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.029997] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.030114] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.032932] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.032940] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.033060] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:95:HDMI-A-1] EDID changed, epoch counter 2
<7> [112.033131] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [112.033136] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [112.033141] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [112.033144] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [112.033150] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] probed modes :
<7> [112.033153] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.033156] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.033159] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.033162] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [112.033165] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [112.033307] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [112.033313] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [112.033317] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.033647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.033767] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.034064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.034216] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.034220] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.034360] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.037174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.037179] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.037299] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from connected to disconnected
<7> [112.037309] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [112.037355] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [112.037359] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.037728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.037871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.038200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.038346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.038351] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.038477] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.041308] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.041314] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.041439] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<6> [112.041824] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [112.041930] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [112.042307] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [112.042313] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [112.042318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.042648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.042768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.043068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.043216] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.043220] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.043337] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.046149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.046153] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.046284] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [112.046319] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [112.046323] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.046648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.046765] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.047062] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.047206] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.047209] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.047324] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.050113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.050117] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.050245] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [112.050335] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:HDMI-A-1] EDID override reset
<7> [112.050354] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [112.050358] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.050683] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.050803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.051102] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.051269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.051273] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.051416] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.054235] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.054240] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.054365] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [112.054496] [drm:status_store] [CONNECTOR:104:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [112.054502] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]
<7> [112.054507] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [112.067888] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [112.067895] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [112.068111] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [112.068249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.068549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [112.068684] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [112.068716] i915 0000:00:02.0: [drm:do_detailed_mode] [CONNECTOR:104:HDMI-A-2] reducing hsync_end 2100->2092
<7> [112.068897] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [112.068900] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [112.068905] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2092 2092 1080 1082 1087 1115 0x40 0x9
<7> [112.068909] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [112.068912] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [112.068916] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [112.068919] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [112.068923] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [112.068926] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [112.068929] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.068933] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.068936] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.068939] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [112.068979] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]
<7> [112.068983] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [112.082056] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [112.082061] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [112.082281] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [112.082405] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.082702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [112.082835] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [112.082864] i915 0000:00:02.0: [drm:do_detailed_mode] [CONNECTOR:104:HDMI-A-2] reducing hsync_end 2100->2092
<7> [112.083036] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [112.083039] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [112.083043] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2092 2092 1080 1082 1087 1115 0x40 0x9
<7> [112.083046] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [112.083050] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [112.083053] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [112.083056] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [112.083059] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [112.083062] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [112.083065] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.083068] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.083071] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.083074] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [112.083184] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:104:HDMI-A-2] EDID override reset
<7> [112.083203] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]
<7> [112.083207] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [112.096304] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [112.096310] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [112.096522] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [112.096644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.096943] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [112.097076] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [112.097103] i915 0000:00:02.0: [drm:do_detailed_mode] [CONNECTOR:104:HDMI-A-2] reducing hsync_end 2100->2092
<7> [112.097285] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [112.097288] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [112.097293] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2092 2092 1080 1082 1087 1115 0x40 0x9
<7> [112.097296] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [112.097300] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [112.097303] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [112.097306] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [112.097309] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [112.097313] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [112.097316] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.097319] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.097322] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.097325] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [112.097428] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:108:DP-1] EDID override reset
<7> [112.097445] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]
<7> [112.097450] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]
<7> [112.097586] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected
<7> [112.097704] [drm:status_store] [CONNECTOR:115:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [112.097709] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]
<7> [112.097713] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [112.098046] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [112.098166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [112.098476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [112.098612] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [112.098616] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.098734] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [112.101554] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [112.101559] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [112.101680] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [112.101713] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]
<7> [112.101717] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [112.102041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [112.102159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [112.102466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [112.102601] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [112.102605] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.102720] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [112.105526] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [112.105529] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [112.105650] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [112.105734] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:115:HDMI-A-3] EDID override reset
<7> [112.105752] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]
<7> [112.105755] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [112.106081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [112.106212] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [112.106509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [112.106643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [112.106646] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.106763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [112.109618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [112.109622] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [112.109742] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [112.109839] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:119:DP-2] EDID override reset
<7> [112.109856] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]
<7> [112.109860] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]
<7> [112.110572] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00
<7> [112.111149] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [112.111956] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09
<7> [112.111968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes
<7> [112.112091] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [112.112218] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [112.112338] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<5> [112.117735] EDID block 0 is all zeroes
<7> [112.117739] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:
<7> [112.117743] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.117745] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.117747] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.117749] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.117750] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.117752] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.117754] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.117755] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.117762] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no
<7> [112.117885] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [112.118567] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.118690] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [112.119307] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] probed modes :
<7> [112.119312] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa
<7> [112.119316] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.119320] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.119323] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.119326] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<6> [112.119902] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [112.120007] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [112.120013] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [112.120018] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.120372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.120492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.120791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.120924] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.120928] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.121045] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.123869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.123874] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.123995] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [112.124039] [drm:status_store] [CONNECTOR:104:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [112.124044] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]
<7> [112.124049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [112.137062] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [112.137068] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [112.137293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [112.137417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.137716] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [112.137869] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [112.137900] i915 0000:00:02.0: [drm:do_detailed_mode] [CONNECTOR:104:HDMI-A-2] reducing hsync_end 2100->2092
<7> [112.138080] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [112.138084] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [112.138089] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2092 2092 1080 1082 1087 1115 0x40 0x9
<7> [112.138093] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [112.138096] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [112.138100] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [112.138103] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [112.138106] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [112.138110] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [112.138113] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.138116] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.138120] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.138123] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [112.138181] [drm:status_store] [CONNECTOR:115:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [112.138186] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]
<7> [112.138190] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [112.138518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [112.138636] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [112.138935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [112.139068] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [112.139072] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.139225] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [112.142055] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [112.142059] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [112.142190] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [112.142374] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [112.151841] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [112.151847] [drm:drm_client_modeset_probe]
<7> [112.151883] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [112.151888] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.152277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.152402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.152716] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.152888] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.152893] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.153033] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.155879] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.155885] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.156019] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [112.156025] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]
<7> [112.156029] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [112.169217] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [112.169224] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [112.169441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [112.169576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.169885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [112.170029] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [112.170062] i915 0000:00:02.0: [drm:do_detailed_mode] [CONNECTOR:104:HDMI-A-2] reducing hsync_end 2100->2092
<7> [112.170277] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [112.170282] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [112.170287] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2092 2092 1080 1082 1087 1115 0x40 0x9
<7> [112.170291] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [112.170294] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [112.170298] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [112.170302] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [112.170305] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [112.170309] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [112.170312] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.170316] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.170319] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.170322] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [112.170326] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]
<7> [112.170331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]
<7> [112.170469] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected
<7> [112.170473] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]
<7> [112.170477] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [112.170811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [112.170930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [112.171275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [112.171414] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [112.171418] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.171537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [112.174359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [112.174363] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [112.174493] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [112.174497] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]
<7> [112.174501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]
<7> [112.175216] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00
<7> [112.175807] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [112.176618] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09
<7> [112.176630] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes
<7> [112.176755] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [112.176876] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [112.176997] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<5> [112.182533] EDID block 0 is all zeroes
<7> [112.182537] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:
<7> [112.182542] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.182544] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.182546] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.182548] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.182550] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.182552] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.182554] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.182556] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.182563] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no
<7> [112.182686] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [112.183380] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [112.183503] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [112.184128] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] probed modes :
<7> [112.184133] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa
<7> [112.184138] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.184142] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.184145] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.184149] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [112.184152] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [112.184155] [drm:drm_client_modeset_probe] connector 104 enabled? yes
<7> [112.184158] [drm:drm_client_modeset_probe] connector 108 enabled? no
<7> [112.184160] [drm:drm_client_modeset_probe] connector 115 enabled? no
<7> [112.184162] [drm:drm_client_modeset_probe] connector 119 enabled? yes
<7> [112.184190] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [112.184203] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 104
<7> [112.184207] [drm:drm_client_modeset_probe] looking for preferred mode on connector 104 0
<7> [112.184211] [drm:drm_client_modeset_probe] found mode 1920x1200
<7> [112.184214] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 119
<7> [112.184218] [drm:drm_client_modeset_probe] looking for preferred mode on connector 119 0
<7> [112.184222] [drm:drm_client_modeset_probe] found mode 640x480
<7> [112.184226] [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [112.184275] [drm:drm_client_modeset_probe] desired mode 1920x1200 set on crtc 51 (0,0)
<7> [112.184282] [drm:drm_client_modeset_probe] desired mode 640x480 set on crtc 72 (0,0)
<6> [112.210685] Console: switching to colour frame buffer device 80x30
Created at 2023-11-13 02:32:56