igt@i915_selftest@live@client on fi-skl-guc@linus-v6.7-rc1 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-g453b9df12 (x86_64) (Linux: 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ x86_64)
Out	Starting dynamic subtest: client Dynamic subtest client: SUCCESS (0.574s)
Err	Starting dynamic subtest: client Dynamic subtest client: SUCCESS (0.574s)
Dmesg	<6> [245.960525] [IGT] i915_selftest: starting dynamic subtest client <5> [246.055873] Setting dangerous option enable_guc - tainting kernel <5> [246.055880] Setting dangerous option live_selftests - tainting kernel <7> [246.090121] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [246.090369] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [246.090543] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [246.090554] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [246.090714] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [246.090926] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [246.091066] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [246.091679] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [246.091812] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [246.091932] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [246.092049] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [246.092053] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [246.092345] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [246.092361] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [246.092510] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [246.092824] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018 <7> [246.093004] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [246.093154] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [246.093358] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [246.093515] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [246.097227] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [246.097401] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [246.097559] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [246.097715] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [246.097872] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [246.097996] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [246.098116] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [246.098247] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [246.098417] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [246.098584] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [246.098752] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [246.098918] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [246.099082] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [246.099197] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [246.099825] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [246.100059] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [246.100307] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [246.100543] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [246.100739] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [246.100920] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [246.101088] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [246.101262] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [246.101474] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [246.101708] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [246.101940] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [246.102171] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [246.102377] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [246.102536] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [246.102719] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [246.102882] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [246.103044] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [246.103265] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [246.103499] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [246.103726] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [246.103954] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [246.104132] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [246.104325] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [246.104483] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [246.104648] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8 <7> [246.104852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [246.105080] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [246.105317] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [246.105556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [246.105770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [246.105960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [246.106124] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [246.106322] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [246.106550] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [246.106779] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [246.107070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [246.107276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [246.107436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [246.107630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [246.107822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [246.108000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [246.108234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [246.108463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [246.108735] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <6> [246.109350] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled <7> [246.109354] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 <7> [246.109754] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <6> [246.109991] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [246.109943] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [246.110098] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [246.110281] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [246.110462] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [246.110614] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [246.110763] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [246.110914] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [246.111065] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [246.111220] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [246.112486] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [246.113892] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [246.114168] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [246.114393] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [246.114865] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C] <7> [246.115059] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [246.115289] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] Using AUX CH D (VBT) <7> [246.115453] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D] <7> [246.115750] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [246.115905] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D] <7> [246.116049] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [246.116269] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] Using AUX CH A (VBT) <7> [246.116430] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E] <7> [246.116632] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [246.117054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [246.117246] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [246.117420] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [246.117577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [246.117734] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [246.117890] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [246.118044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [246.118209] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [246.118364] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [246.118519] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [246.118673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [246.118826] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [246.118981] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [246.119136] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A <7> [246.119301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A <7> [246.119450] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A <7> [246.119598] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B <7> [246.119746] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C <7> [246.119899] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A <7> [246.120054] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [246.120230] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [246.120392] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [246.120551] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [246.120745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [246.120910] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled <7> [246.121071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled <7> [246.121250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled <7> [246.121411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled <7> [246.121560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [246.121710] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [246.121858] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [246.122006] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [246.122167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [246.122332] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [246.122483] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [246.122631] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [246.122793] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [246.122946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [246.123096] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [246.123255] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [246.123451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [246.123612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [246.123770] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [246.123927] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [246.124086] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [246.124250] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [246.124402] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [246.126508] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K) <7> [246.126663] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [246.126792] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [246.126931] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [246.127081] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global <7> [246.128096] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [246.128266] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [246.128423] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [246.131158] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [246.131354] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [246.131532] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [246.151616] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f <7> [246.151798] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [246.151952] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [246.152103] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [246.152263] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2 <7> [246.152412] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006 <7> [246.152562] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [246.152712] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [246.152860] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [246.153009] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [246.153157] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [246.153311] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [246.153460] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [246.153609] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [246.153758] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [246.154890] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [246.154894] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [246.159255] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [246.159712] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [246.159890] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [246.159893] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [246.167908] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [246.168059] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [246.168199] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [246.168324] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [246.168676] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [246.168937] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [246.169100] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [246.169268] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [246.169424] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [246.169597] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [246.172479] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [246.172973] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event <7> [246.173471] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 <7> [246.174356] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event <7> [246.174835] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event <7> [246.175310] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 <7> [246.175875] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event <6> [246.175917] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [246.177425] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [246.191507] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [246.192271] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input84 <7> [246.193013] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [246.193647] i915 display info: display version: 9 <7> [246.193649] [drm:drm_client_modeset_probe] <7> [246.193652] i915 display info: cursor_needs_physical: no <7> [246.193655] i915 display info: has_cdclk_crawl: no <7> [246.193658] i915 display info: has_cdclk_squash: no <7> [246.193660] i915 display info: has_ddi: yes <7> [246.193663] i915 display info: has_dp_mst: yes <7> [246.193666] i915 display info: has_dsb: no <7> [246.193669] i915 display info: has_fpga_dbg: yes <7> [246.193672] i915 display info: has_gmch: no <7> [246.193674] i915 display info: has_hotplug: yes <7> [246.193677] i915 display info: has_hti: no <7> [246.193680] i915 display info: has_ipc: yes <7> [246.193683] i915 display info: has_overlay: no <7> [246.193685] i915 display info: has_psr: yes <7> [246.193688] i915 display info: has_psr_hw_tracking: yes <7> [246.193691] i915 display info: overlay_needs_physical: no <7> [246.193693] i915 display info: supports_tv: no <7> [246.193696] i915 display info: has_hdcp: yes <7> [246.193699] i915 display info: has_dmc: yes <7> [246.193701] i915 display info: has_dsc: no <7> [246.193702] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [246.193711] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [246.193706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [246.193944] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [246.193958] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [246.193964] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] <7> [246.193970] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [246.193980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [246.194228] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] status updated from unknown to disconnected <7> [246.194240] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected <7> [246.194246] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] <7> [246.194252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [246.194255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [246.194520] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] status updated from unknown to disconnected <7> [246.194532] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected <7> [246.194538] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] <7> [246.194494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [246.194544] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [246.194813] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected <7> [246.194825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected <7> [246.194831] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] <7> [246.194838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [246.195166] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] status updated from unknown to disconnected <7> [246.195216] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [246.195417] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected <7> [246.195439] i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9 <7> [246.195442] i915 device info: graphics version: 9 <7> [246.195444] i915 device info: media version: 9 <7> [246.195447] i915 device info: graphics stepping: G0 <7> [246.195447] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [246.195452] i915 device info: media stepping: G0 <7> [246.195451] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [246.195455] i915 device info: display stepping: G0 <7> [246.195455] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [246.195457] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [246.195458] i915 device info: base die stepping: ** <7> [246.195460] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [246.195461] i915 device info: gt: 2 <7> [246.195463] i915 device info: memory-regions: 0x21 <7> [246.195465] i915 device info: page-sizes: 0x11000 <7> [246.195466] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [246.195467] i915 device info: platform: SKYLAKE <7> [246.195469] i915 device info: ppgtt-size: 48 <7> [246.195471] i915 device info: ppgtt-type: 2 <7> [246.195473] i915 device info: dma_mask_size: 39 <7> [246.195476] i915 device info: is_mobile: no <7> [246.195479] i915 device info: is_lp: no <7> [246.195481] i915 device info: require_force_probe: no <7> [246.195484] i915 device info: is_dgfx: no <7> [246.195485] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [246.195486] i915 device info: has_64bit_reloc: yes <7> [246.195489] i915 device info: has_64k_pages: no <7> [246.195492] i915 device info: gpu_reset_clobbers_display: no <7> [246.195494] i915 device info: has_reset_engine: yes <7> [246.195495] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [246.195497] i915 device info: has_3d_pipeline: yes <7> [246.195499] i915 device info: has_flat_ccs: no <7> [246.195500] i915 device info: has_global_mocs: no <7> [246.195503] i915 device info: has_gmd_id: no <7> [246.195505] i915 device info: has_gt_uc: yes <7> [246.195508] i915 device info: has_heci_pxp: no <7> [246.195511] i915 device info: has_heci_gscfi: no <7> [246.195514] i915 device info: has_guc_deprivilege: no <7> [246.195516] i915 device info: has_guc_tlb_invalidation: no <7> [246.195517] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [246.195519] i915 device info: has_l3_ccs_read: no <7> [246.195523] i915 device info: has_l3_dpf: no <7> [246.195526] i915 device info: has_llc: yes <6> [246.195528] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [246.195528] i915 device info: has_logical_ring_contexts: yes <7> [246.195530] i915 device info: has_logical_ring_elsq: no <7> [246.195532] i915 device info: has_media_ratio_mode: no <7> [246.195534] i915 device info: has_mslice_steering: no <7> [246.195537] i915 device info: has_oa_bpc_reporting: no <7> [246.195539] i915 device info: has_oa_slice_contrib_limits: no <7> [246.195541] i915 device info: has_oam: no <7> [246.195544] i915 device info: has_one_eu_per_fuse_bit: no <7> [246.195547] i915 device info: has_pxp: no <7> [246.195550] i915 device info: has_rc6: yes <7> [246.195552] i915 device info: has_rc6p: no <7> [246.195554] i915 device info: has_rps: yes <7> [246.195557] i915 device info: has_runtime_pm: yes <7> [246.195560] i915 device info: has_snoop: no <7> [246.195562] i915 device info: has_coherent_ggtt: yes <7> [246.195565] i915 device info: tuning_thread_rr_after_dep: no <7> [246.195568] i915 device info: unfenced_needs_alignment: no <7> [246.195570] i915 device info: hws_needs_physical: no <7> [246.195573] i915 device info: has_pooled_eu: no <7> [246.195576] i915 device info: rawclk rate: 24000 kHz <7> [246.195579] i915 device info: iommu: enabled <7> [246.195582] i915 device info: available engines: 40403 <7> [246.195585] i915 device info: slice total: 1, mask=0001 <7> [246.195588] i915 device info: subslice total: 3 <7> [246.195591] i915 device info: slice0: 3 subslices, mask=00000007 <7> [246.195594] i915 device info: slice1: 0 subslices, mask=00000000 <7> [246.195597] i915 device info: slice2: 0 subslices, mask=00000000 <7> [246.195600] i915 device info: EU total: 24 <7> [246.195603] i915 device info: EU per subslice: 8 <7> [246.195605] i915 device info: has slice power gating: no <7> [246.195607] i915 device info: has subslice power gating: no <7> [246.195609] i915 device info: has EU power gating: yes <6> [246.195612] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [246.195615] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [246.195618] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [246.195622] i915: Performing live selftests with st_random_seed=0x4c9f079c st_timeout=500 <6> [246.195625] i915: Running client <6> [246.195646] i915: Running i915_gem_client_blt_live_selftests/igt_client_tiled_blits <6> [246.195793] Using hole at 1000 <7> [246.196126] [drm:drm_client_modeset_probe] <7> [246.196187] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [246.196195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [246.196462] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [246.196469] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] <7> [246.196476] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [246.196684] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected <7> [246.196689] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] <7> [246.196694] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [246.196948] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected <7> [246.196954] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] <7> [246.196960] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [246.197229] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected <7> [246.197236] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] <7> [246.197242] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [246.197510] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected <7> [246.197517] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [246.197522] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [246.197527] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [246.197530] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [246.197534] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [246.197538] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [246.197570] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [246.197581] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [246.197603] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [246.197615] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [246.197677] [drm:drm_client_modeset_probe] <7> [246.197720] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [246.197728] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [246.197945] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [246.197951] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] <7> [246.197957] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [246.198159] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected <7> [246.198164] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] <7> [246.198170] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [246.198445] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected <7> [246.198452] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] <7> [246.198458] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [246.198670] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected <7> [246.198677] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] <7> [246.198683] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [246.198947] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected <7> [246.198952] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [246.198956] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [246.198960] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [246.198964] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [246.198967] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [246.198970] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [246.199003] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [246.199056] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [246.199076] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [246.199088] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [246.225476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [246.225688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [246.225858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [246.226026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [246.250368] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [246.298252] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [246.356537] i915: probe of 0000:00:02.0 failed with error -25 <6> [246.535051] [IGT] i915_selftest: finished subtest client, SUCCESS

<6> [245.960525] [IGT] i915_selftest: starting dynamic subtest client

<5> [246.055873] Setting dangerous option enable_guc - tainting kernel

<5> [246.055880] Setting dangerous option live_selftests - tainting kernel

<7> [246.090121] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [246.090369] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [246.090543] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [246.090554] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [246.090714] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [246.090926] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [246.091066] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [246.091679] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [246.091812] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [246.091932] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [246.092049] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [246.092053] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [246.092345] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [246.092361] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [246.092510] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [246.092824] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018

<7> [246.093004] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [246.093154] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [246.093358] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [246.093515] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [246.097227] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [246.097401] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [246.097559] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [246.097715] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [246.097872] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [246.097996] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [246.098116] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [246.098247] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [246.098417] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [246.098584] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [246.098752] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [246.098918] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [246.099082] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [246.099197] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [246.099825] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [246.100059] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [246.100307] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [246.100543] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [246.100739] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [246.100920] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [246.101088] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [246.101262] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [246.101474] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [246.101708] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [246.101940] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [246.102171] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [246.102377] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [246.102536] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [246.102719] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [246.102882] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [246.103044] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [246.103265] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [246.103499] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [246.103726] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [246.103954] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [246.104132] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [246.104325] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [246.104483] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [246.104648] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8

<7> [246.104852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [246.105080] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [246.105317] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [246.105556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [246.105770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [246.105960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [246.106124] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [246.106322] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [246.106550] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [246.106779] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [246.107070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [246.107276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [246.107436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [246.107630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [246.107822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [246.108000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [246.108234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [246.108463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [246.108735] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<6> [246.109350] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled

<7> [246.109354] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0

<7> [246.109754] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<6> [246.109991] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [246.109943] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [246.110098] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [246.110281] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [246.110462] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [246.110614] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [246.110763] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [246.110914] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [246.111065] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [246.111220] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [246.112486] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [246.113892] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [246.114168] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [246.114393] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [246.114865] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C]

<7> [246.115059] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [246.115289] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] Using AUX CH D (VBT)

<7> [246.115453] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D]

<7> [246.115750] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [246.115905] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D]

<7> [246.116049] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [246.116269] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] Using AUX CH A (VBT)

<7> [246.116430] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E]

<7> [246.116632] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [246.117054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [246.117246] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [246.117420] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [246.117577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [246.117734] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [246.117890] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [246.118044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [246.118209] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [246.118364] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [246.118519] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [246.118673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [246.118826] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [246.118981] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [246.119136] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [246.119301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [246.119450] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A

<7> [246.119598] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B

<7> [246.119746] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C

<7> [246.119899] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [246.120054] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [246.120230] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [246.120392] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [246.120551] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [246.120745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [246.120910] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled

<7> [246.121071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled

<7> [246.121250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled

<7> [246.121411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled

<7> [246.121560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [246.121710] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [246.121858] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [246.122006] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [246.122167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [246.122332] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [246.122483] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [246.122631] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [246.122793] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [246.122946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [246.123096] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [246.123255] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [246.123451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [246.123612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [246.123770] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [246.123927] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [246.124086] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [246.124250] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [246.124402] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [246.126508] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K)

<7> [246.126663] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [246.126792] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [246.126931] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [246.127081] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global

<7> [246.128096] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [246.128266] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [246.128423] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [246.131158] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [246.131354] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [246.131532] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [246.151616] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f

<7> [246.151798] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [246.151952] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [246.152103] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [246.152263] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2

<7> [246.152412] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006

<7> [246.152562] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [246.152712] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [246.152860] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [246.153009] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [246.153157] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [246.153311] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [246.153460] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [246.153609] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [246.153758] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [246.154890] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [246.154894] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [246.159255] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [246.159712] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [246.159890] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [246.159893] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [246.167908] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [246.168059] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [246.168199] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [246.168324] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [246.168676] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [246.168937] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [246.169100] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [246.169268] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [246.169424] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [246.169597] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [246.172479] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [246.172973] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event

<7> [246.173471] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1

<7> [246.174356] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event

<7> [246.174835] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event

<7> [246.175310] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2

<7> [246.175875] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event

<6> [246.175917] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [246.177425] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [246.191507] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [246.192271] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input84

<7> [246.193013] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [246.193647] i915 display info: display version: 9

<7> [246.193649] [drm:drm_client_modeset_probe]

<7> [246.193652] i915 display info: cursor_needs_physical: no

<7> [246.193655] i915 display info: has_cdclk_crawl: no

<7> [246.193658] i915 display info: has_cdclk_squash: no

<7> [246.193660] i915 display info: has_ddi: yes

<7> [246.193663] i915 display info: has_dp_mst: yes

<7> [246.193666] i915 display info: has_dsb: no

<7> [246.193669] i915 display info: has_fpga_dbg: yes

<7> [246.193672] i915 display info: has_gmch: no

<7> [246.193674] i915 display info: has_hotplug: yes

<7> [246.193677] i915 display info: has_hti: no

<7> [246.193680] i915 display info: has_ipc: yes

<7> [246.193683] i915 display info: has_overlay: no

<7> [246.193685] i915 display info: has_psr: yes

<7> [246.193688] i915 display info: has_psr_hw_tracking: yes

<7> [246.193691] i915 display info: overlay_needs_physical: no

<7> [246.193693] i915 display info: supports_tv: no

<7> [246.193696] i915 display info: has_hdcp: yes

<7> [246.193699] i915 display info: has_dmc: yes

<7> [246.193701] i915 display info: has_dsc: no

<7> [246.193702] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [246.193711] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [246.193706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [246.193944] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [246.193958] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [246.193964] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]

<7> [246.193970] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [246.193980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [246.194228] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] status updated from unknown to disconnected

<7> [246.194240] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [246.194246] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]

<7> [246.194252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [246.194255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [246.194520] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] status updated from unknown to disconnected

<7> [246.194532] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected

<7> [246.194538] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]

<7> [246.194494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [246.194544] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [246.194813] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected

<7> [246.194825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [246.194831] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]

<7> [246.194838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [246.195166] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] status updated from unknown to disconnected

<7> [246.195216] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [246.195417] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected

<7> [246.195439] i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9

<7> [246.195442] i915 device info: graphics version: 9

<7> [246.195444] i915 device info: media version: 9

<7> [246.195447] i915 device info: graphics stepping: G0

<7> [246.195447] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [246.195452] i915 device info: media stepping: G0

<7> [246.195451] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [246.195455] i915 device info: display stepping: G0

<7> [246.195455] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [246.195457] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [246.195458] i915 device info: base die stepping: **

<7> [246.195460] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [246.195461] i915 device info: gt: 2

<7> [246.195463] i915 device info: memory-regions: 0x21

<7> [246.195465] i915 device info: page-sizes: 0x11000

<7> [246.195466] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [246.195467] i915 device info: platform: SKYLAKE

<7> [246.195469] i915 device info: ppgtt-size: 48

<7> [246.195471] i915 device info: ppgtt-type: 2

<7> [246.195473] i915 device info: dma_mask_size: 39

<7> [246.195476] i915 device info: is_mobile: no

<7> [246.195479] i915 device info: is_lp: no

<7> [246.195481] i915 device info: require_force_probe: no

<7> [246.195484] i915 device info: is_dgfx: no

<7> [246.195485] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [246.195486] i915 device info: has_64bit_reloc: yes

<7> [246.195489] i915 device info: has_64k_pages: no

<7> [246.195492] i915 device info: gpu_reset_clobbers_display: no

<7> [246.195494] i915 device info: has_reset_engine: yes

<7> [246.195495] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [246.195497] i915 device info: has_3d_pipeline: yes

<7> [246.195499] i915 device info: has_flat_ccs: no

<7> [246.195500] i915 device info: has_global_mocs: no

<7> [246.195503] i915 device info: has_gmd_id: no

<7> [246.195505] i915 device info: has_gt_uc: yes

<7> [246.195508] i915 device info: has_heci_pxp: no

<7> [246.195511] i915 device info: has_heci_gscfi: no

<7> [246.195514] i915 device info: has_guc_deprivilege: no

<7> [246.195516] i915 device info: has_guc_tlb_invalidation: no

<7> [246.195517] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [246.195519] i915 device info: has_l3_ccs_read: no

<7> [246.195523] i915 device info: has_l3_dpf: no

<7> [246.195526] i915 device info: has_llc: yes

<6> [246.195528] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [246.195528] i915 device info: has_logical_ring_contexts: yes

<7> [246.195530] i915 device info: has_logical_ring_elsq: no

<7> [246.195532] i915 device info: has_media_ratio_mode: no

<7> [246.195534] i915 device info: has_mslice_steering: no

<7> [246.195537] i915 device info: has_oa_bpc_reporting: no

<7> [246.195539] i915 device info: has_oa_slice_contrib_limits: no

<7> [246.195541] i915 device info: has_oam: no

<7> [246.195544] i915 device info: has_one_eu_per_fuse_bit: no

<7> [246.195547] i915 device info: has_pxp: no

<7> [246.195550] i915 device info: has_rc6: yes

<7> [246.195552] i915 device info: has_rc6p: no

<7> [246.195554] i915 device info: has_rps: yes

<7> [246.195557] i915 device info: has_runtime_pm: yes

<7> [246.195560] i915 device info: has_snoop: no

<7> [246.195562] i915 device info: has_coherent_ggtt: yes

<7> [246.195565] i915 device info: tuning_thread_rr_after_dep: no

<7> [246.195568] i915 device info: unfenced_needs_alignment: no

<7> [246.195570] i915 device info: hws_needs_physical: no

<7> [246.195573] i915 device info: has_pooled_eu: no

<7> [246.195576] i915 device info: rawclk rate: 24000 kHz

<7> [246.195579] i915 device info: iommu: enabled

<7> [246.195582] i915 device info: available engines: 40403

<7> [246.195585] i915 device info: slice total: 1, mask=0001

<7> [246.195588] i915 device info: subslice total: 3

<7> [246.195591] i915 device info: slice0: 3 subslices, mask=00000007

<7> [246.195594] i915 device info: slice1: 0 subslices, mask=00000000

<7> [246.195597] i915 device info: slice2: 0 subslices, mask=00000000

<7> [246.195600] i915 device info: EU total: 24

<7> [246.195603] i915 device info: EU per subslice: 8

<7> [246.195605] i915 device info: has slice power gating: no

<7> [246.195607] i915 device info: has subslice power gating: no

<7> [246.195609] i915 device info: has EU power gating: yes

<6> [246.195612] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [246.195615] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [246.195618] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [246.195622] i915: Performing live selftests with st_random_seed=0x4c9f079c st_timeout=500

<6> [246.195646] i915: Running i915_gem_client_blt_live_selftests/igt_client_tiled_blits

<7> [246.196126] [drm:drm_client_modeset_probe]

<7> [246.196187] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [246.196195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [246.196462] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [246.196469] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]

<7> [246.196476] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [246.196684] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [246.196689] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]

<7> [246.196694] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [246.196948] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected

<7> [246.196954] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]

<7> [246.196960] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [246.197229] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [246.197236] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]

<7> [246.197242] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [246.197510] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected

<7> [246.197517] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [246.197522] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [246.197527] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [246.197530] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [246.197534] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [246.197538] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [246.197570] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [246.197581] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [246.197603] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [246.197615] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [246.197677] [drm:drm_client_modeset_probe]

<7> [246.197720] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [246.197728] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [246.197945] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [246.197951] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]

<7> [246.197957] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [246.198159] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [246.198164] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]

<7> [246.198170] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [246.198445] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected

<7> [246.198452] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]

<7> [246.198458] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [246.198670] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [246.198677] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]

<7> [246.198683] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [246.198947] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected

<7> [246.198952] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [246.198956] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [246.198960] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [246.198964] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [246.198967] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [246.198970] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [246.199003] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [246.199056] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [246.199076] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [246.199088] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [246.225476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [246.225688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [246.225858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [246.226026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [246.250368] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [246.298252] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [246.356537] i915: probe of 0000:00:02.0 failed with error -25

<6> [246.535051] [IGT] i915_selftest: finished subtest client, SUCCESS

Results for igt@i915_selftest@live@client