igt@i915_module_load@reload on fi-skl-6600u@linus-v6.7-rc1 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-g453b9df12 (x86_64) (Linux: 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ x86_64)
Out	Starting subtest: reload Opened device: /dev/dri/card0 Subtest reload: SUCCESS (3.145s)
Err	Starting subtest: reload Subtest reload: SUCCESS (3.145s)
Dmesg	<6> [268.275179] Console: switching to colour dummy device 80x25 <6> [268.276361] [IGT] i915_module_load: executing <6> [268.280691] [IGT] i915_module_load: starting subtest reload <7> [268.382088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [268.382807] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [268.383354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [268.383700] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [268.390750] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [268.390979] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [268.391177] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [268.391360] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [268.391643] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [268.391908] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [268.392177] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [268.392429] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [268.392697] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [268.394037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [268.394387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [268.397576] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [268.397883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [268.637272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [268.638828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [268.640902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [268.642755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [268.644376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [268.645986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [268.660441] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [268.662712] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [268.664795] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [268.668503] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [268.670198] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [268.671882] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [268.673620] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [268.675256] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [268.676921] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [268.678519] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [268.680133] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [268.681793] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [268.683448] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [268.685160] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [268.686823] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [268.688513] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [268.690216] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [268.691883] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [268.693638] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [268.695252] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [268.696925] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [268.698683] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [268.699761] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [268.700508] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [268.701305] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [268.702114] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [268.702784] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [268.703506] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [268.704181] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [268.704959] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [268.705596] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [268.706314] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [268.706983] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [268.707860] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [268.708439] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [268.708967] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [268.709477] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [268.709952] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [268.710466] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [268.710914] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [268.711411] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 0 <7> [268.711953] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [268.712488] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [268.712995] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [268.713557] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [268.713937] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [268.714456] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [268.715051] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [268.715724] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [268.716308] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [268.716930] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [268.717421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset] <7> [268.717797] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [268.718199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [268.718568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [268.719137] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [268.726720] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [268.727148] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f <7> [268.727794] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [268.931066] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 0 <7> [268.936176] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [268.946703] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [268.946973] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power off <7> [268.948302] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - short <7> [268.948746] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power off time <7> [268.950385] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [268.999932] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [269.001097] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [269.002272] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long <7> [269.003235] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:51:pipe A] <7> [269.003641] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [269.005201] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [269.006079] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:94:DDI A/PHY A] <7> [269.006925] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A] <7> [269.007657] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A] <7> [269.008669] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [269.011437] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A] <7> [269.013078] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B] <7> [269.014683] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A] <7> [269.016227] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B] <7> [269.017803] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C] <7> [269.019355] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI C/PHY C] <7> [269.020910] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [269.022480] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [269.024042] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [269.025630] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] <7> [269.027363] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [269.029078] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [269.030756] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [269.032434] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [269.034982] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [269.105163] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [269.195712] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <7> [269.196107] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [269.602963] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [269.604157] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [270.461221] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [270.461501] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [270.461766] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [270.462071] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [270.462474] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [270.462732] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [270.463591] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [270.463782] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [270.463929] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [270.464076] i915 0000:00:02.0: vgaarb: deactivate vga console <7> [270.464340] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [270.464528] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [270.465038] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [270.465287] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [270.465483] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [270.465698] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [270.465929] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [270.474556] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [270.474782] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [270.474975] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [270.475185] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [270.475386] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: LPDDR3 <7> [270.475564] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb DIMMs: no <7> [270.475786] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [270.475934] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb DIMMs: no <7> [270.476080] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb DIMMs: no <7> [270.476239] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [270.476378] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb DIMMs: no <7> [270.476514] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [270.476682] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [270.476899] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [270.477425] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [270.477706] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [270.477926] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [270.478139] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [270.478353] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [270.478587] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [270.478802] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [270.479014] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [270.479268] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [270.479586] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [270.479889] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [270.480195] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [270.480489] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [270.480750] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [270.480960] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [270.481174] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [270.481385] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [270.481702] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [270.481999] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [270.482293] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [270.482599] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [270.482897] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [270.483166] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [270.483455] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [270.483708] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [270.483990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [270.484295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [270.484560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [270.484823] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [270.485039] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [270.485247] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [270.485451] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [270.485778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [270.486046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [270.486274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [270.486512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [270.486836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [270.487071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [270.487279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [270.487484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [270.487785] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [270.488576] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [270.489151] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [270.489418] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [270.490571] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <6> [270.490809] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [270.490887] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [270.491177] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [270.491467] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [270.491767] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [270.492050] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [270.492331] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [270.492635] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [270.496186] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [270.501557] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [270.501936] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [270.502265] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [270.507550] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [270.507858] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [270.508163] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [270.508464] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [270.508797] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [270.509107] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [270.509414] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [270.509735] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [270.510036] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [270.510340] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [270.510771] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [270.511124] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [270.511407] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [270.511708] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [270.511984] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [270.512265] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [270.512613] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [270.513218] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [270.513515] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [270.513880] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [270.514165] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [270.514485] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [270.514789] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [270.725775] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [270.726899] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [270.728757] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 <7> [270.731850] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [270.750830] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [270.750884] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [270.750919] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [270.751320] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:95:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [270.752712] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:95:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [270.754156] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:95:eDP-1] DRRS type: static <7> [270.755435] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:95:eDP-1] Using native PCH PWM for backlight control <7> [270.756480] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:95:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [270.757891] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [270.758851] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [270.759448] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [270.759927] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [270.760470] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [270.761195] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [270.762903] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:102:DDI B/PHY B] Using AUX CH B (VBT) <7> [270.763663] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:102:DDI B/PHY B] <7> [270.765059] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [270.765438] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:102:DDI B/PHY B] <7> [270.765866] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:102:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [270.766702] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI C/PHY C] Using AUX CH C (VBT) <7> [270.767122] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI C/PHY C] <7> [270.767964] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [270.768333] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI C/PHY C] <7> [270.768723] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [270.770062] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [270.770453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [270.770852] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [270.771190] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [270.771489] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [270.771831] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [270.772233] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [270.772643] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [270.772994] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [270.773301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [270.773636] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [270.773993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [270.774291] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI A/PHY A] hw state readout: disabled, pipe A <7> [270.774631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:102:DDI B/PHY B] hw state readout: disabled, pipe A <7> [270.774974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DP-MST A] hw state readout: disabled, pipe A <7> [270.775257] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DP-MST B] hw state readout: disabled, pipe B <7> [270.775683] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP-MST C] hw state readout: disabled, pipe C <7> [270.776071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI C/PHY C] hw state readout: disabled, pipe A <7> [270.776396] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A <7> [270.776680] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B <7> [270.777023] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C <7> [270.777396] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [270.777800] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [270.778170] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [270.778520] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [270.778894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:eDP-1] hw state readout: disabled <7> [270.779163] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:103:DP-1] hw state readout: disabled <7> [270.779467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:112:HDMI-A-1] hw state readout: disabled <7> [270.779866] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-2] hw state readout: disabled <7> [270.780240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:124:HDMI-A-2] hw state readout: disabled <7> [270.780598] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [270.780941] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [270.781185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [270.781426] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [270.781708] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [270.782049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [270.782399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [270.782772] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [270.783130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [270.783451] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [270.783766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [270.784046] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [270.784345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [270.784589] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [270.784851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [270.785067] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [270.785284] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [270.785494] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [270.785731] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [270.786047] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [270.786216] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [270.786429] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [270.786736] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [270.788563] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [270.788826] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [270.789128] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [270.805031] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [270.805234] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [270.805377] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [270.805517] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [270.806089] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [270.806356] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [270.806564] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [270.806795] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [270.806983] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [270.807213] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [270.814610] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:95:eDP-1] backlight device intel_backlight registered <7> [270.815093] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [270.818055] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:eDP-1] generating connector hotplug event <7> [270.818939] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [270.820449] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:103:DP-1] generating connector hotplug event <7> [270.821395] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:112:HDMI-A-1] generating connector hotplug event <7> [270.822257] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [270.823653] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-2] generating connector hotplug event <7> [270.824409] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:124:HDMI-A-2] generating connector hotplug event <6> [270.824514] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [270.828766] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [270.855592] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [270.865783] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20 <7> [270.867274] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [270.868405] i915 display info: display version: 9 <7> [270.868412] i915 display info: cursor_needs_physical: no <7> [270.868417] i915 display info: has_cdclk_crawl: no <7> [270.868421] i915 display info: has_cdclk_squash: no <7> [270.868425] i915 display info: has_ddi: yes <7> [270.868430] i915 display info: has_dp_mst: yes <7> [270.868434] i915 display info: has_dsb: no <7> [270.868438] i915 display info: has_fpga_dbg: yes <7> [270.868442] i915 display info: has_gmch: no <7> [270.868446] i915 display info: has_hotplug: yes <7> [270.868450] i915 display info: has_hti: no <7> [270.868454] i915 display info: has_ipc: yes <7> [270.868458] i915 display info: has_overlay: no <7> [270.868462] i915 display info: has_psr: yes <7> [270.868466] i915 display info: has_psr_hw_tracking: yes <7> [270.868470] i915 display info: overlay_needs_physical: no <7> [270.868474] i915 display info: supports_tv: no <7> [270.868478] i915 display info: has_hdcp: yes <7> [270.868482] i915 display info: has_dmc: yes <7> [270.868485] i915 display info: has_dsc: no <7> [270.868492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [270.869019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [270.869321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [270.869696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [270.870561] [drm:drm_client_modeset_probe] <7> [270.870646] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] <7> [270.870661] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [270.870915] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [270.871219] i915 device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [270.871226] i915 device info: graphics version: 9 <7> [270.871231] i915 device info: media version: 9 <7> [270.871236] i915 device info: graphics stepping: H0 <7> [270.871240] i915 device info: media stepping: H0 <7> [270.871244] i915 device info: display stepping: H0 <7> [270.871249] i915 device info: base die stepping: ** <7> [270.871253] i915 device info: gt: 2 <7> [270.871257] i915 device info: memory-regions: 0x21 <7> [270.871262] i915 device info: page-sizes: 0x11000 <7> [270.871266] i915 device info: platform: SKYLAKE <7> [270.871270] i915 device info: ppgtt-size: 48 <7> [270.871275] i915 device info: ppgtt-type: 2 <7> [270.871279] i915 device info: dma_mask_size: 39 <7> [270.871283] i915 device info: is_mobile: no <7> [270.871288] i915 device info: is_lp: no <7> [270.871292] i915 device info: require_force_probe: no <7> [270.871296] i915 device info: is_dgfx: no <7> [270.871300] i915 device info: has_64bit_reloc: yes <7> [270.871305] i915 device info: has_64k_pages: no <7> [270.871309] i915 device info: gpu_reset_clobbers_display: no <7> [270.871313] i915 device info: has_reset_engine: yes <7> [270.871318] i915 device info: has_3d_pipeline: yes <7> [270.871322] i915 device info: has_flat_ccs: no <7> [270.871326] i915 device info: has_global_mocs: no <7> [270.871330] i915 device info: has_gmd_id: no <7> [270.871335] i915 device info: has_gt_uc: yes <7> [270.871339] i915 device info: has_heci_pxp: no <7> [270.871343] i915 device info: has_heci_gscfi: no <7> [270.871348] i915 device info: has_guc_deprivilege: no <7> [270.871352] i915 device info: has_guc_tlb_invalidation: no <7> [270.871356] i915 device info: has_l3_ccs_read: no <7> [270.871361] i915 device info: has_l3_dpf: no <7> [270.871365] i915 device info: has_llc: yes <7> [270.871370] i915 device info: has_logical_ring_contexts: yes <7> [270.871374] i915 device info: has_logical_ring_elsq: no <7> [270.871378] i915 device info: has_media_ratio_mode: no <7> [270.871383] i915 device info: has_mslice_steering: no <7> [270.871387] i915 device info: has_oa_bpc_reporting: no <7> [270.871391] i915 device info: has_oa_slice_contrib_limits: no <7> [270.871396] i915 device info: has_oam: no <7> [270.871400] i915 device info: has_one_eu_per_fuse_bit: no <7> [270.871404] i915 device info: has_pxp: no <7> [270.871409] i915 device info: has_rc6: yes <7> [270.871413] i915 device info: has_rc6p: no <7> [270.871417] i915 device info: has_rps: yes <7> [270.871421] i915 device info: has_runtime_pm: yes <7> [270.871426] i915 device info: has_snoop: no <7> [270.871430] i915 device info: has_coherent_ggtt: yes <7> [270.871434] i915 device info: tuning_thread_rr_after_dep: no <7> [270.871439] i915 device info: unfenced_needs_alignment: no <7> [270.871443] i915 device info: hws_needs_physical: no <7> [270.871447] i915 device info: has_pooled_eu: no <7> [270.871451] i915 device info: rawclk rate: 24000 kHz <7> [270.871456] i915 device info: iommu: disabled <7> [270.871460] i915 device info: available engines: 40403 <7> [270.871465] i915 device info: slice total: 1, mask=0001 <7> [270.871469] i915 device info: subslice total: 3 <7> [270.871473] i915 device info: slice0: 3 subslices, mask=00000007 <7> [270.871478] i915 device info: slice1: 0 subslices, mask=00000000 <7> [270.871482] i915 device info: slice2: 0 subslices, mask=00000000 <7> [270.871487] i915 device info: EU total: 24 <7> [270.871491] i915 device info: EU per subslice: 8 <7> [270.871495] i915 device info: has slice power gating: no <7> [270.871498] i915 device info: has subslice power gating: no <7> [270.871502] i915 device info: has EU power gating: yes <6> [270.871506] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [270.871511] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [270.871515] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [270.872094] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [270.872412] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [270.872730] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [270.873026] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [270.873368] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [270.873382] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [270.873392] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [270.873431] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [270.873759] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [270.874809] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [270.875142] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [270.880614] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] status updated from unknown to connected <7> [270.880825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] probed modes : <7> [270.880834] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [270.880847] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [270.880859] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] <7> [270.880872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [270.881412] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] status updated from unknown to disconnected <7> [270.881434] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected <7> [270.881445] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] <7> [270.881457] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-1] <7> [270.882721] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [270.883061] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [270.883717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [270.884053] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [270.884065] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [270.884370] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [270.887958] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [270.887972] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [270.888288] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] status updated from unknown to disconnected <7> [270.888313] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] disconnected <7> [270.890824] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] <7> [270.890840] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-2] <7> [270.891198] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] status updated from unknown to disconnected <7> [270.891226] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] disconnected <7> [270.891248] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] <7> [270.891259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:124:HDMI-A-2] <7> [270.894614] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [270.894920] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [270.895449] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [270.895798] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [270.895809] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [270.896090] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [270.899612] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [270.899625] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [270.899926] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] status updated from unknown to disconnected <7> [270.899952] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] disconnected <7> [270.899973] [drm:drm_client_modeset_probe] connector 95 enabled? yes <7> [270.899981] [drm:drm_client_modeset_probe] connector 103 enabled? no <7> [270.899988] [drm:drm_client_modeset_probe] connector 112 enabled? no <7> [270.899994] [drm:drm_client_modeset_probe] connector 118 enabled? no <7> [270.900000] [drm:drm_client_modeset_probe] connector 124 enabled? no <7> [270.900033] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [270.900052] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 95 <7> [270.900059] [drm:drm_client_modeset_probe] looking for preferred mode on connector 95 0 <7> [270.900065] [drm:drm_client_modeset_probe] found mode 3200x1800 <7> [270.900071] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [270.900092] [drm:drm_client_modeset_probe] desired mode 3200x1800 set on crtc 51 (0,0) <7> [270.900133] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [270.900238] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7> [270.905751] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 3200x1800 fb: 0x000c0000 <6> [270.907214] fbcon: i915drmfb (fb0) is primary device <7> [270.909007] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [270.909373] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:94:DDI A/PHY A][CRTC:51:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000 <7> [270.909691] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 24 <7> [270.909969] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1119750 available 2160000 <7> [270.910250] i915 0000:00:02.0: [drm:intel_dp_audio_compute_config [i915]] [CONNECTOR:95:eDP-1] SDP split enable: no <7> [270.910524] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [270.911128] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:94:DDI A/PHY A] [CRTC:51:pipe A] <7> [270.911477] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [270.914555] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [270.914880] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [270.915189] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [270.915487] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [270.915824] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [270.916144] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [270.916436] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [270.917314] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [270.917664] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [270.917959] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [270.918255] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [270.918566] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [270.918867] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [270.919165] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [270.919458] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [270.920004] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [270.920381] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [270.920835] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [270.921135] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [270.921430] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [270.921891] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [270.922192] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [270.922729] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [270.923031] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [270.923326] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [270.923808] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [270.924106] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [270.924393] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [270.924864] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [270.925161] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [270.925457] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [270.926024] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [270.926330] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [270.926750] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [270.927121] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000001) <7> [270.927416] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [270.927860] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [270.928152] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [270.928448] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [270.928902] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [270.929259] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [270.929737] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [270.930022] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [270.930309] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [270.930757] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [270.931043] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [270.931329] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [270.931853] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (373250 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz) <7> [270.932160] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (23329 kHz) > old min cdclk (0 kHz) <7> [270.932462] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [270.932787] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [270.933086] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 1, actual 1 <7> [270.933384] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 <7> [270.933879] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 0 <7> [270.934182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset] <7> [270.934476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [270.934926] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [270.935219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [270.935511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [270.935957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [270.936250] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [270.936692] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [270.936992] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [270.937288] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [270.937731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [270.938025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [270.938321] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7> [270.938327] i915 0000:00:02.0: pixelformat: RGB <7> [270.938332] i915 0000:00:02.0: colorimetry: sRGB <7> [270.938336] i915 0000:00:02.0: bpc: 0 <7> [270.938340] i915 0000:00:02.0: dynamic range: VESA range <7> [270.938345] i915 0000:00:02.0: content type: Not defined <7> [270.938349] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [270.938673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [270.938970] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [270.939267] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [270.939584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [270.939879] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [270.940169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250 <7> [270.940463] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [270.940763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [270.941055] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [270.941352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [270.941666] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [270.941962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [270.942255] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [270.942771] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [270.943067] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [270.943361] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [270.943731] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [270.944029] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [270.944323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:96] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [270.945626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [270.945932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [270.946229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [270.946528] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [270.947498] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [270.948674] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A] <7> [270.948902] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B] <7> [270.949113] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A] <7> [270.949392] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B] <7> [270.949917] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C] <7> [270.950210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI C/PHY C] <7> [270.950497] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [270.950953] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [270.951249] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [270.951714] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [270.952198] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [270.952512] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [270.952846] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [270.953302] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:51:pipe A] <7> [270.953651] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [270.954214] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power on <7> [270.954835] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [270.955186] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [270.955467] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [270.955927] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power on <7> [270.956264] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [270.979689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [271.156899] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [271.158447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [271.161234] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [271.170378] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [271.171713] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [271.175412] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [271.177370] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [271.179323] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [271.185402] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Clock recovery OK <7> [271.186793] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [271.188511] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [271.193312] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [271.195195] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [271.197078] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [271.202146] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [271.203627] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [271.206158] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [271.209642] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [271.211422] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [271.213943] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 937 <7> [271.216375] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23040000 bytes of contiguous stolen space for FBC, limit: 1 <7> [271.217911] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A] <7> [271.222977] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 335 us, max time under evasion is 250 us <7> [271.226223] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [271.233842] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] <7> [271.235406] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [271.238227] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7> [271.239976] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <6> [271.246377] Console: switching to colour frame buffer device 400x112 <6> [271.286461] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [271.293670] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7> [271.293691] [drm:drm_client_modeset_probe] <7> [271.293850] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] <7> [271.293875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [271.297004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [271.297606] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [271.298077] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [271.298492] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [271.299008] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [271.299030] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [271.299046] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [271.299136] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [271.299651] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [271.300814] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [271.301324] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [271.302622] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] probed modes : <7> [271.302645] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [271.302660] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [271.302675] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] <7> [271.302690] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [271.303213] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected <7> [271.303223] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] <7> [271.303232] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-1] <7> [271.304712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [271.305176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [271.305835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [271.306277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [271.306290] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [271.306680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [271.310435] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [271.310444] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [271.310825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] disconnected <7> [271.310838] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] <7> [271.310853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-2] <7> [271.311190] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] disconnected <7> [271.311198] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] <7> [271.311205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:124:HDMI-A-2] <7> [271.311805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [271.312029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [271.312471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [271.312780] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [271.312791] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [271.313155] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [271.316622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [271.316631] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [271.316874] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] disconnected <7> [271.316881] [drm:drm_client_modeset_probe] connector 95 enabled? yes <7> [271.316887] [drm:drm_client_modeset_probe] connector 103 enabled? no <7> [271.316891] [drm:drm_client_modeset_probe] connector 112 enabled? no <7> [271.316894] [drm:drm_client_modeset_probe] connector 118 enabled? no <7> [271.316898] [drm:drm_client_modeset_probe] connector 124 enabled? no <7> [271.316956] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [271.316970] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 95 <7> [271.316974] [drm:drm_client_modeset_probe] looking for preferred mode on connector 95 0 <7> [271.316978] [drm:drm_client_modeset_probe] found mode 3200x1800 <7> [271.316982] [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [271.317004] [drm:drm_client_modeset_probe] desired mode 3200x1800 set on crtc 51 (0,0) <7> [271.325713] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7> [271.325723] [drm:drm_client_modeset_probe] <7> [271.325800] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] <7> [271.325811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [271.326857] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [271.327179] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [271.327464] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [271.328122] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [271.328427] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [271.328437] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [271.328443] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [271.328478] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [271.328752] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [271.329611] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [271.329865] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [271.330830] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] probed modes : <7> [271.330838] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [271.330848] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [271.330857] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] <7> [271.330866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [271.331143] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected <7> [271.331151] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] <7> [271.331159] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-1] <7> [271.331666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [271.331908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [271.332382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [271.332657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [271.332665] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [271.332911] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [271.336366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [271.336376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [271.336721] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] disconnected <7> [271.336731] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] <7> [271.336739] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-2] <7> [271.337007] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] disconnected <7> [271.337015] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] <7> [271.337023] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:124:HDMI-A-2] <7> [271.337513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [271.337719] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [271.338181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [271.338453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [271.338463] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [271.338741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [271.342127] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [271.342140] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [271.342389] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] disconnected <7> [271.342399] [drm:drm_client_modeset_probe] connector 95 enabled? yes <7> [271.342407] [drm:drm_client_modeset_probe] connector 103 enabled? no <7> [271.342414] [drm:drm_client_modeset_probe] connector 112 enabled? no <7> [271.342419] [drm:drm_client_modeset_probe] connector 118 enabled? no <7> [271.342425] [drm:drm_client_modeset_probe] connector 124 enabled? no <7> [271.342455] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [271.342472] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 95 <7> [271.342479] [drm:drm_client_modeset_probe] looking for preferred mode on connector 95 0 <7> [271.342485] [drm:drm_client_modeset_probe] found mode 3200x1800 <7> [271.342491] [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [271.342516] [drm:drm_client_modeset_probe] desired mode 3200x1800 set on crtc 51 (0,0) <6> [271.345700] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 <6> [271.361063] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7> [271.361915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [271.363346] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [271.364382] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [271.364723] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [271.375895] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <6> [271.423738] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker <6> [271.423777] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <6> [271.423782] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) <6> [271.423787] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 <6> [271.423790] snd_hda_codec_realtek hdaudioC0D0: inputs: <6> [271.423794] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 <6> [271.423798] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a <6> [271.423802] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 <6> [271.426882] [IGT] i915_module_load: finished subtest reload, SUCCESS <6> [271.427996] [IGT] i915_module_load: exiting, ret=0

<6> [268.275179] Console: switching to colour dummy device 80x25

<6> [268.276361] [IGT] i915_module_load: executing

<6> [268.280691] [IGT] i915_module_load: starting subtest reload

<7> [268.382088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [268.382807] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [268.383354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [268.383700] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [268.390750] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [268.390979] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [268.391177] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [268.391360] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [268.391643] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [268.391908] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [268.392177] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [268.392429] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [268.392697] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [268.394037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [268.394387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [268.397576] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [268.397883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [268.637272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [268.638828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [268.640902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [268.642755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [268.644376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [268.645986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [268.660441] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [268.662712] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [268.664795] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [268.668503] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [268.670198] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [268.671882] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [268.673620] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [268.675256] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [268.676921] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [268.678519] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [268.680133] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [268.681793] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [268.683448] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [268.685160] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [268.686823] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [268.688513] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [268.690216] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [268.691883] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [268.693638] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [268.695252] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [268.696925] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [268.698683] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [268.699761] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [268.700508] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [268.701305] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [268.702114] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [268.702784] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [268.703506] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [268.704181] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [268.704959] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [268.705596] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [268.706314] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [268.706983] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [268.707860] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [268.708439] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [268.708967] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [268.709477] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [268.709952] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [268.710466] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [268.710914] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [268.711411] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 0

<7> [268.711953] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [268.712488] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [268.712995] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [268.713557] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [268.713937] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [268.714456] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [268.715051] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [268.715724] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [268.716308] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [268.716930] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [268.717421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset]

<7> [268.717797] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [268.718199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [268.718568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [268.719137] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [268.726720] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [268.727148] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f

<7> [268.727794] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [268.931066] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 0

<7> [268.936176] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [268.946703] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [268.946973] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power off

<7> [268.948302] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - short

<7> [268.948746] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [268.950385] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [268.999932] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [269.001097] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [269.002272] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long

<7> [269.003235] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:51:pipe A]

<7> [269.003641] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [269.005201] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [269.006079] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:94:DDI A/PHY A]

<7> [269.006925] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]

<7> [269.007657] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A]

<7> [269.008669] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [269.011437] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A]

<7> [269.013078] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B]

<7> [269.014683] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A]

<7> [269.016227] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B]

<7> [269.017803] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C]

<7> [269.019355] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI C/PHY C]

<7> [269.020910] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [269.022480] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [269.024042] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [269.025630] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1]

<7> [269.027363] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [269.029078] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [269.030756] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [269.032434] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [269.034982] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [269.105163] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [269.195712] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<7> [269.196107] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [269.602963] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [269.604157] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [270.461221] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [270.461501] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [270.461766] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [270.462071] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [270.462474] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [270.462732] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [270.463591] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [270.463782] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [270.463929] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [270.464076] i915 0000:00:02.0: vgaarb: deactivate vga console

<7> [270.464340] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [270.464528] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [270.465038] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [270.465287] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [270.465483] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [270.465698] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [270.465929] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [270.474556] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [270.474782] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [270.474975] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [270.475185] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [270.475386] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: LPDDR3

<7> [270.475564] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb DIMMs: no

<7> [270.475786] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [270.475934] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb DIMMs: no

<7> [270.476080] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb DIMMs: no

<7> [270.476239] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [270.476378] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb DIMMs: no

<7> [270.476514] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [270.476682] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [270.476899] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [270.477425] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [270.477706] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [270.477926] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [270.478139] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [270.478353] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [270.478587] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [270.478802] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [270.479014] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [270.479268] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [270.479586] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [270.479889] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [270.480195] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [270.480489] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [270.480750] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [270.480960] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [270.481174] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [270.481385] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [270.481702] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [270.481999] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [270.482293] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [270.482599] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [270.482897] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [270.483166] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [270.483455] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [270.483708] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [270.483990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [270.484295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [270.484560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [270.484823] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [270.485039] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [270.485247] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [270.485451] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [270.485778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [270.486046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [270.486274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [270.486512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [270.486836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [270.487071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [270.487279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [270.487484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [270.487785] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [270.488576] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [270.489151] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [270.489418] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [270.490571] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<6> [270.490809] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [270.490887] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [270.491177] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [270.491467] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [270.491767] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [270.492050] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [270.492331] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [270.492635] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [270.496186] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [270.501557] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [270.501936] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [270.502265] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [270.507550] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [270.507858] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [270.508163] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [270.508464] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [270.508797] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [270.509107] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [270.509414] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [270.509735] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [270.510036] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [270.510340] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [270.510771] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [270.511124] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [270.511407] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [270.511708] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [270.511984] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [270.512265] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [270.512613] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [270.513218] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [270.513515] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [270.513880] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [270.514165] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [270.514485] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [270.514789] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [270.725775] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [270.726899] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [270.728757] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40

<7> [270.731850] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [270.750830] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [270.750884] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [270.750919] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [270.751320] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:95:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [270.752712] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:95:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [270.754156] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:95:eDP-1] DRRS type: static

<7> [270.755435] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:95:eDP-1] Using native PCH PWM for backlight control

<7> [270.756480] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:95:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [270.757891] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [270.758851] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [270.759448] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [270.759927] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [270.760470] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [270.761195] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [270.762903] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:102:DDI B/PHY B] Using AUX CH B (VBT)

<7> [270.763663] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:102:DDI B/PHY B]

<7> [270.765059] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [270.765438] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:102:DDI B/PHY B]

<7> [270.765866] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:102:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [270.766702] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI C/PHY C] Using AUX CH C (VBT)

<7> [270.767122] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI C/PHY C]

<7> [270.767964] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [270.768333] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI C/PHY C]

<7> [270.768723] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [270.770062] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [270.770453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [270.770852] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [270.771190] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [270.771489] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [270.771831] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [270.772233] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [270.772643] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [270.772994] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [270.773301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [270.773636] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [270.773993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [270.774291] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [270.774631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:102:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [270.774974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DP-MST A] hw state readout: disabled, pipe A

<7> [270.775257] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DP-MST B] hw state readout: disabled, pipe B

<7> [270.775683] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP-MST C] hw state readout: disabled, pipe C

<7> [270.776071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [270.776396] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A

<7> [270.776680] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B

<7> [270.777023] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C

<7> [270.777396] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [270.777800] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [270.778170] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [270.778520] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [270.778894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:eDP-1] hw state readout: disabled

<7> [270.779163] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:103:DP-1] hw state readout: disabled

<7> [270.779467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:112:HDMI-A-1] hw state readout: disabled

<7> [270.779866] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-2] hw state readout: disabled

<7> [270.780240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:124:HDMI-A-2] hw state readout: disabled

<7> [270.780598] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [270.780941] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [270.781185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [270.781426] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [270.781708] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [270.782049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [270.782399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [270.782772] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [270.783130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [270.783451] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [270.783766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [270.784046] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [270.784345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [270.784589] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [270.784851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [270.785067] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [270.785284] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [270.785494] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [270.785731] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [270.786047] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [270.786216] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [270.786429] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [270.786736] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [270.788563] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [270.788826] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [270.789128] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [270.805031] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [270.805234] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [270.805377] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [270.805517] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [270.806089] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [270.806356] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [270.806564] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [270.806795] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [270.806983] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [270.807213] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [270.814610] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:95:eDP-1] backlight device intel_backlight registered

<7> [270.815093] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [270.818055] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:eDP-1] generating connector hotplug event

<7> [270.818939] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [270.820449] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:103:DP-1] generating connector hotplug event

<7> [270.821395] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:112:HDMI-A-1] generating connector hotplug event

<7> [270.822257] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [270.823653] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-2] generating connector hotplug event

<7> [270.824409] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:124:HDMI-A-2] generating connector hotplug event

<6> [270.824514] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [270.828766] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [270.855592] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [270.865783] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20

<7> [270.867274] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [270.868405] i915 display info: display version: 9

<7> [270.868412] i915 display info: cursor_needs_physical: no

<7> [270.868417] i915 display info: has_cdclk_crawl: no

<7> [270.868421] i915 display info: has_cdclk_squash: no

<7> [270.868425] i915 display info: has_ddi: yes

<7> [270.868430] i915 display info: has_dp_mst: yes

<7> [270.868438] i915 display info: has_fpga_dbg: yes

<7> [270.868442] i915 display info: has_gmch: no

<7> [270.868446] i915 display info: has_hotplug: yes

<7> [270.868454] i915 display info: has_ipc: yes

<7> [270.868458] i915 display info: has_overlay: no

<7> [270.868462] i915 display info: has_psr: yes

<7> [270.868466] i915 display info: has_psr_hw_tracking: yes

<7> [270.868470] i915 display info: overlay_needs_physical: no

<7> [270.868474] i915 display info: supports_tv: no

<7> [270.868478] i915 display info: has_hdcp: yes

<7> [270.868482] i915 display info: has_dmc: yes

<7> [270.868492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [270.869019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [270.869321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [270.869696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [270.870646] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1]

<7> [270.870661] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [270.870915] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [270.871219] i915 device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [270.871226] i915 device info: graphics version: 9

<7> [270.871231] i915 device info: media version: 9

<7> [270.871236] i915 device info: graphics stepping: H0

<7> [270.871240] i915 device info: media stepping: H0

<7> [270.871244] i915 device info: display stepping: H0

<7> [270.871249] i915 device info: base die stepping: **

<7> [270.871257] i915 device info: memory-regions: 0x21

<7> [270.871262] i915 device info: page-sizes: 0x11000

<7> [270.871266] i915 device info: platform: SKYLAKE

<7> [270.871270] i915 device info: ppgtt-size: 48

<7> [270.871275] i915 device info: ppgtt-type: 2

<7> [270.871279] i915 device info: dma_mask_size: 39

<7> [270.871283] i915 device info: is_mobile: no

<7> [270.871292] i915 device info: require_force_probe: no

<7> [270.871300] i915 device info: has_64bit_reloc: yes

<7> [270.871305] i915 device info: has_64k_pages: no

<7> [270.871309] i915 device info: gpu_reset_clobbers_display: no

<7> [270.871313] i915 device info: has_reset_engine: yes

<7> [270.871318] i915 device info: has_3d_pipeline: yes

<7> [270.871322] i915 device info: has_flat_ccs: no

<7> [270.871326] i915 device info: has_global_mocs: no

<7> [270.871330] i915 device info: has_gmd_id: no

<7> [270.871335] i915 device info: has_gt_uc: yes

<7> [270.871339] i915 device info: has_heci_pxp: no

<7> [270.871343] i915 device info: has_heci_gscfi: no

<7> [270.871348] i915 device info: has_guc_deprivilege: no

<7> [270.871352] i915 device info: has_guc_tlb_invalidation: no

<7> [270.871356] i915 device info: has_l3_ccs_read: no

<7> [270.871361] i915 device info: has_l3_dpf: no

<7> [270.871370] i915 device info: has_logical_ring_contexts: yes

<7> [270.871374] i915 device info: has_logical_ring_elsq: no

<7> [270.871378] i915 device info: has_media_ratio_mode: no

<7> [270.871383] i915 device info: has_mslice_steering: no

<7> [270.871387] i915 device info: has_oa_bpc_reporting: no

<7> [270.871391] i915 device info: has_oa_slice_contrib_limits: no

<7> [270.871400] i915 device info: has_one_eu_per_fuse_bit: no

<7> [270.871421] i915 device info: has_runtime_pm: yes

<7> [270.871426] i915 device info: has_snoop: no

<7> [270.871430] i915 device info: has_coherent_ggtt: yes

<7> [270.871434] i915 device info: tuning_thread_rr_after_dep: no

<7> [270.871439] i915 device info: unfenced_needs_alignment: no

<7> [270.871443] i915 device info: hws_needs_physical: no

<7> [270.871447] i915 device info: has_pooled_eu: no

<7> [270.871451] i915 device info: rawclk rate: 24000 kHz

<7> [270.871456] i915 device info: iommu: disabled

<7> [270.871460] i915 device info: available engines: 40403

<7> [270.871465] i915 device info: slice total: 1, mask=0001

<7> [270.871469] i915 device info: subslice total: 3

<7> [270.871473] i915 device info: slice0: 3 subslices, mask=00000007

<7> [270.871478] i915 device info: slice1: 0 subslices, mask=00000000

<7> [270.871482] i915 device info: slice2: 0 subslices, mask=00000000

<7> [270.871491] i915 device info: EU per subslice: 8

<7> [270.871495] i915 device info: has slice power gating: no

<7> [270.871498] i915 device info: has subslice power gating: no

<7> [270.871502] i915 device info: has EU power gating: yes

<6> [270.871506] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [270.871511] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [270.871515] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [270.872094] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [270.872412] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [270.872730] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [270.873026] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [270.873368] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [270.873382] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [270.873392] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [270.873431] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [270.873759] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [270.874809] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [270.875142] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [270.880614] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] status updated from unknown to connected

<7> [270.880825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] probed modes :

<7> [270.880834] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [270.880847] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [270.880859] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1]

<7> [270.880872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [270.881412] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] status updated from unknown to disconnected

<7> [270.881434] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected

<7> [270.881445] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1]

<7> [270.881457] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-1]

<7> [270.882721] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [270.883061] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [270.883717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [270.884053] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [270.884065] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [270.884370] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [270.887958] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [270.887972] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [270.888288] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] status updated from unknown to disconnected

<7> [270.888313] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] disconnected

<7> [270.890824] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2]

<7> [270.890840] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-2]

<7> [270.891198] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] status updated from unknown to disconnected

<7> [270.891226] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] disconnected

<7> [270.891248] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2]

<7> [270.891259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:124:HDMI-A-2]

<7> [270.894614] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [270.894920] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [270.895449] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [270.895798] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [270.895809] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [270.896090] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [270.899612] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [270.899625] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [270.899926] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] status updated from unknown to disconnected

<7> [270.899952] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] disconnected

<7> [270.899973] [drm:drm_client_modeset_probe] connector 95 enabled? yes

<7> [270.899981] [drm:drm_client_modeset_probe] connector 103 enabled? no

<7> [270.899988] [drm:drm_client_modeset_probe] connector 112 enabled? no

<7> [270.899994] [drm:drm_client_modeset_probe] connector 118 enabled? no

<7> [270.900000] [drm:drm_client_modeset_probe] connector 124 enabled? no

<7> [270.900033] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [270.900052] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 95

<7> [270.900059] [drm:drm_client_modeset_probe] looking for preferred mode on connector 95 0

<7> [270.900065] [drm:drm_client_modeset_probe] found mode 3200x1800

<7> [270.900071] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [270.900092] [drm:drm_client_modeset_probe] desired mode 3200x1800 set on crtc 51 (0,0)

<7> [270.900133] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [270.900238] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one

<7> [270.905751] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 3200x1800 fb: 0x000c0000

<6> [270.907214] fbcon: i915drmfb (fb0) is primary device

<7> [270.909007] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [270.909373] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:94:DDI A/PHY A][CRTC:51:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000

<7> [270.909691] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 24

<7> [270.909969] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1119750 available 2160000

<7> [270.910250] i915 0000:00:02.0: [drm:intel_dp_audio_compute_config [i915]] [CONNECTOR:95:eDP-1] SDP split enable: no

<7> [270.910524] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [270.911128] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:94:DDI A/PHY A] [CRTC:51:pipe A]

<7> [270.911477] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [270.914555] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [270.914880] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [270.915189] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [270.915487] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [270.915824] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [270.916144] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [270.916436] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [270.917314] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [270.917664] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [270.917959] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [270.918255] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [270.918566] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [270.918867] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [270.919165] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [270.919458] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [270.920004] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [270.920381] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [270.920835] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [270.921135] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [270.921430] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [270.921891] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [270.922192] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [270.922729] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [270.923031] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [270.923326] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [270.923808] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [270.924106] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [270.924393] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [270.924864] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [270.925161] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [270.925457] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [270.926024] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [270.926330] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [270.926750] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [270.927121] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000001)

<7> [270.927416] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [270.927860] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [270.928152] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [270.928448] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [270.928902] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [270.929259] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [270.929737] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [270.930022] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [270.930309] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [270.930757] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [270.931043] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [270.931329] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [270.931853] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (373250 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz)

<7> [270.932160] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (23329 kHz) > old min cdclk (0 kHz)

<7> [270.932462] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [270.932787] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [270.933086] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 1, actual 1

<7> [270.933384] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0

<7> [270.933879] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 0

<7> [270.934182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset]

<7> [270.934476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [270.934926] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [270.935219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [270.935511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [270.935957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [270.936250] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [270.936692] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [270.936992] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [270.937288] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [270.937731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [270.938025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [270.938321] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0

<7> [270.938327] i915 0000:00:02.0: pixelformat: RGB

<7> [270.938332] i915 0000:00:02.0: colorimetry: sRGB

<7> [270.938340] i915 0000:00:02.0: dynamic range: VESA range

<7> [270.938345] i915 0000:00:02.0: content type: Not defined

<7> [270.938349] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [270.938673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [270.938970] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [270.939267] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [270.939584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [270.939879] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [270.940169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250

<7> [270.940463] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [270.940763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [270.941055] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [270.941352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [270.941666] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [270.941962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [270.942255] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [270.942771] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [270.943067] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [270.943361] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [270.943731] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [270.944029] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [270.944323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:96] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [270.945626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [270.945932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [270.946229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [270.946528] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [270.947498] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [270.948674] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A]

<7> [270.948902] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B]

<7> [270.949113] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A]

<7> [270.949392] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B]

<7> [270.949917] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C]

<7> [270.950210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI C/PHY C]

<7> [270.950497] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [270.950953] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [270.951249] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [270.951714] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [270.952198] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [270.952512] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [270.952846] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [270.953302] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:51:pipe A]

<7> [270.953651] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [270.954214] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power on

<7> [270.954835] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [270.955186] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [270.955467] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [270.955927] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power on

<7> [270.956264] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [270.979689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [271.156899] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [271.158447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [271.161234] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [271.170378] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [271.171713] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [271.175412] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [271.177370] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [271.179323] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [271.185402] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Clock recovery OK

<7> [271.186793] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [271.188511] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [271.193312] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [271.195195] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [271.197078] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [271.202146] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [271.203627] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [271.206158] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [271.209642] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [271.211422] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [271.213943] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 937

<7> [271.216375] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23040000 bytes of contiguous stolen space for FBC, limit: 1

<7> [271.217911] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]

<7> [271.222977] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 335 us, max time under evasion is 250 us

<7> [271.226223] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [271.233842] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1]

<7> [271.235406] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [271.238227] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<7> [271.239976] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<6> [271.246377] Console: switching to colour frame buffer device 400x112

<6> [271.286461] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [271.293670] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]

<7> [271.293850] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1]

<7> [271.293875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [271.297004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [271.297606] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [271.298077] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [271.298492] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [271.299008] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [271.299030] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [271.299046] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [271.299136] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [271.299651] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [271.300814] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [271.301324] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [271.302622] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] probed modes :

<7> [271.302645] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [271.302660] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [271.302675] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1]

<7> [271.302690] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [271.303213] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected

<7> [271.303223] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1]

<7> [271.303232] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-1]

<7> [271.304712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [271.305176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [271.305835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [271.306277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [271.306290] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [271.306680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [271.310435] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [271.310444] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [271.310825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] disconnected

<7> [271.310838] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2]

<7> [271.310853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-2]

<7> [271.311190] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] disconnected

<7> [271.311198] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2]

<7> [271.311205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:124:HDMI-A-2]

<7> [271.311805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [271.312029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [271.312471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [271.312780] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [271.312791] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [271.313155] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [271.316622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [271.316631] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [271.316874] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] disconnected

<7> [271.316881] [drm:drm_client_modeset_probe] connector 95 enabled? yes

<7> [271.316887] [drm:drm_client_modeset_probe] connector 103 enabled? no

<7> [271.316891] [drm:drm_client_modeset_probe] connector 112 enabled? no

<7> [271.316894] [drm:drm_client_modeset_probe] connector 118 enabled? no

<7> [271.316898] [drm:drm_client_modeset_probe] connector 124 enabled? no

<7> [271.316956] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [271.316970] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 95

<7> [271.316974] [drm:drm_client_modeset_probe] looking for preferred mode on connector 95 0

<7> [271.316978] [drm:drm_client_modeset_probe] found mode 3200x1800

<7> [271.316982] [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [271.317004] [drm:drm_client_modeset_probe] desired mode 3200x1800 set on crtc 51 (0,0)

<7> [271.325713] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]

<7> [271.325800] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1]

<7> [271.325811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [271.326857] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [271.327179] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [271.327464] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [271.328122] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [271.328427] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [271.328437] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [271.328443] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [271.328478] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [271.328752] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [271.329611] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [271.329865] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [271.330830] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] probed modes :

<7> [271.330838] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [271.330848] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [271.330857] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1]

<7> [271.330866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [271.331143] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected

<7> [271.331151] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1]

<7> [271.331159] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-1]

<7> [271.331666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [271.331908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [271.332382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [271.332657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [271.332665] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [271.332911] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [271.336366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [271.336376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [271.336721] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] disconnected

<7> [271.336731] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2]

<7> [271.336739] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-2]

<7> [271.337007] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] disconnected

<7> [271.337015] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2]

<7> [271.337023] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:124:HDMI-A-2]

<7> [271.337513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [271.337719] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [271.338181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [271.338453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [271.338463] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [271.338741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [271.342127] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [271.342140] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [271.342389] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] disconnected

<7> [271.342399] [drm:drm_client_modeset_probe] connector 95 enabled? yes

<7> [271.342407] [drm:drm_client_modeset_probe] connector 103 enabled? no

<7> [271.342414] [drm:drm_client_modeset_probe] connector 112 enabled? no

<7> [271.342419] [drm:drm_client_modeset_probe] connector 118 enabled? no

<7> [271.342425] [drm:drm_client_modeset_probe] connector 124 enabled? no

<7> [271.342455] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [271.342472] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 95

<7> [271.342479] [drm:drm_client_modeset_probe] looking for preferred mode on connector 95 0

<7> [271.342485] [drm:drm_client_modeset_probe] found mode 3200x1800

<7> [271.342491] [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [271.342516] [drm:drm_client_modeset_probe] desired mode 3200x1800 set on crtc 51 (0,0)

<6> [271.345700] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380

<6> [271.361063] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

<7> [271.361915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [271.363346] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [271.364382] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]

<7> [271.364723] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [271.375895] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<6> [271.423738] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker

<6> [271.423777] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

<6> [271.423782] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)

<6> [271.423787] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0

<6> [271.423790] snd_hda_codec_realtek hdaudioC0D0: inputs:

<6> [271.423794] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19

<6> [271.423798] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a

<6> [271.423802] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12

<6> [271.426882] [IGT] i915_module_load: finished subtest reload, SUCCESS

<6> [271.427996] [IGT] i915_module_load: exiting, ret=0

Results for igt@i915_module_load@reload