igt@i915_selftest@live@reset on fi-kbl-guc@linus-v6.7-rc1 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-g453b9df12 (x86_64) (Linux: 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ x86_64)
Out	Starting dynamic subtest: reset Dynamic subtest reset: SUCCESS (1.117s)
Err	Starting dynamic subtest: reset Dynamic subtest reset: SUCCESS (1.117s)
Dmesg	<6> [204.760388] [IGT] i915_selftest: starting dynamic subtest reset <5> [204.870938] Setting dangerous option enable_guc - tainting kernel <5> [204.870945] Setting dangerous option live_selftests - tainting kernel <7> [204.914684] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [204.914942] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [204.915133] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [204.915145] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [204.915286] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [204.915516] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [204.915675] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [204.916304] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [204.916460] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [204.916602] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [204.916754] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [204.916759] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [204.917048] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [204.917066] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [204.917200] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [204.917600] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018 <7> [204.917781] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [204.917941] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [204.918097] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [204.918241] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [204.922372] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [204.922519] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [204.922656] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [204.922793] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [204.923009] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [204.923142] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [204.923240] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [204.923335] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [204.923430] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [204.923548] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [204.923691] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [204.923810] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [204.923964] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [204.924114] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [204.924621] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [204.924775] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [204.924974] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [204.925167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [204.925314] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [204.925459] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [204.925616] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [204.925812] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [204.926040] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [204.926188] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [204.926333] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [204.926483] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [204.926657] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [204.926852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [204.927011] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [204.927156] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [204.927300] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [204.927444] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [204.927622] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [204.927798] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [204.928000] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [204.928149] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [204.928288] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [204.928428] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [204.928582] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [204.928783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [204.929011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [204.929170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [204.929314] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [204.929910] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [204.930058] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [204.930213] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [204.930447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [204.930638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [204.930780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [204.930941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [204.931117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [204.931297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [204.931486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [204.931642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [204.931815] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [204.932748] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [204.933264] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [204.933660] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [204.933819] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [204.934005] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [204.934168] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [204.934302] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [204.934435] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [204.934566] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [204.934708] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [204.934849] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [204.935023] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [204.936571] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [204.937908] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [204.938129] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [204.938260] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [204.938601] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [204.938729] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [204.938983] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] Using AUX CH A (VBT) <7> [204.939202] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E] <7> [204.939528] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [204.939955] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [204.940197] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [204.940435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [204.940589] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [204.940754] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [204.940983] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [204.941192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [204.941399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [204.941577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [204.941720] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [204.941881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [204.942082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [204.942291] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [204.942498] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [204.942676] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A <7> [204.942829] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [204.943030] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [204.943241] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [204.943450] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [204.943665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [204.943839] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [204.944063] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [204.944266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [204.944462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [204.944609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [204.944763] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [204.944974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [204.945172] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [204.945370] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [204.945534] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [204.945692] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [204.945882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [204.946097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [204.946296] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [204.946515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [204.946659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [204.946810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [204.946997] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [204.947203] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [204.947399] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [204.947588] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [204.950290] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [204.950446] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [204.950571] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [204.950700] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [204.950847] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global <7> [204.952058] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [204.952201] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [204.952337] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0 <7> [204.955358] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [204.955534] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [204.955697] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [204.982389] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [204.982559] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [204.982694] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [204.982826] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [204.983022] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [204.983214] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004 <7> [204.983408] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [204.983601] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [204.983763] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [204.983916] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [204.984052] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [204.984187] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [204.984322] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [204.984457] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [204.984592] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [204.985951] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [204.985955] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [204.992734] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [204.993206] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [204.993362] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [204.993365] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [205.001220] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [205.001350] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [205.001462] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [205.001571] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [205.001942] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [205.002309] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [205.002494] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [205.002634] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [205.002765] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [205.002960] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [205.007617] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [205.008180] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [205.008714] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1 <7> [205.009639] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <6> [205.009710] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [205.011975] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [205.026593] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [205.027673] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input74 <7> [205.028489] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [205.029268] i915 display info: display version: 9 <7> [205.029272] i915 display info: cursor_needs_physical: no <7> [205.029273] [drm:drm_client_modeset_probe] <7> [205.029275] i915 display info: has_cdclk_crawl: no <7> [205.029277] i915 display info: has_cdclk_squash: no <7> [205.029280] i915 display info: has_ddi: yes <7> [205.029283] i915 display info: has_dp_mst: yes <7> [205.029286] i915 display info: has_dsb: no <7> [205.029289] i915 display info: has_fpga_dbg: yes <7> [205.029292] i915 display info: has_gmch: no <7> [205.029295] i915 display info: has_hotplug: yes <7> [205.029298] i915 display info: has_hti: no <7> [205.029301] i915 display info: has_ipc: yes <7> [205.029303] i915 display info: has_overlay: no <7> [205.029306] i915 display info: has_psr: yes <7> [205.029309] i915 display info: has_psr_hw_tracking: yes <7> [205.029309] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [205.029311] i915 display info: overlay_needs_physical: no <7> [205.029313] i915 display info: supports_tv: no <7> [205.029316] i915 display info: has_hdcp: yes <7> [205.029319] i915 display info: has_dmc: yes <7> [205.029322] i915 display info: has_dsc: no <7> [205.029317] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [205.029326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [205.029459] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [205.029470] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [205.029475] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [205.029479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [205.029608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [205.029616] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [205.029619] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [205.029556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [205.029624] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [205.029755] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [205.029762] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [205.029766] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [205.029769] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [205.029772] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [205.029774] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [205.029802] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [205.029809] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [205.029823] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [205.029831] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [205.029763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [205.029974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [205.030556] [drm:drm_client_modeset_probe] <7> [205.030590] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [205.030596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [205.030732] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [205.030737] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [205.030684] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [205.030741] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [205.030869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [205.030873] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [205.030917] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [205.030922] i915 device info: graphics version: 9 <7> [205.030925] i915 device info: media version: 9 <7> [205.030928] i915 device info: graphics stepping: F0 <7> [205.030931] i915 device info: media stepping: F0 <7> [205.030934] i915 device info: display stepping: C0 <7> [205.030937] i915 device info: base die stepping: ** <7> [205.030940] i915 device info: gt: 2 <7> [205.030943] i915 device info: memory-regions: 0x21 <7> [205.030945] i915 device info: page-sizes: 0x11000 <7> [205.030948] i915 device info: platform: KABYLAKE <7> [205.030951] i915 device info: ppgtt-size: 48 <7> [205.030954] i915 device info: ppgtt-type: 2 <7> [205.030957] i915 device info: dma_mask_size: 39 <7> [205.030877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [205.030960] i915 device info: is_mobile: no <7> [205.030962] i915 device info: is_lp: no <7> [205.030965] i915 device info: require_force_probe: no <7> [205.030967] i915 device info: is_dgfx: no <7> [205.030970] i915 device info: has_64bit_reloc: yes <7> [205.030972] i915 device info: has_64k_pages: no <7> [205.030975] i915 device info: gpu_reset_clobbers_display: no <7> [205.030977] i915 device info: has_reset_engine: yes <7> [205.030979] i915 device info: has_3d_pipeline: yes <7> [205.030982] i915 device info: has_flat_ccs: no <7> [205.030984] i915 device info: has_global_mocs: no <7> [205.030987] i915 device info: has_gmd_id: no <7> [205.030989] i915 device info: has_gt_uc: yes <7> [205.030992] i915 device info: has_heci_pxp: no <7> [205.030994] i915 device info: has_heci_gscfi: no <7> [205.030996] i915 device info: has_guc_deprivilege: no <7> [205.030999] i915 device info: has_guc_tlb_invalidation: no <7> [205.031001] i915 device info: has_l3_ccs_read: no <7> [205.031004] i915 device info: has_l3_dpf: no <7> [205.031006] i915 device info: has_llc: yes <7> [205.031008] i915 device info: has_logical_ring_contexts: yes <7> [205.031011] i915 device info: has_logical_ring_elsq: no <7> [205.031013] i915 device info: has_media_ratio_mode: no <7> [205.031016] i915 device info: has_mslice_steering: no <7> [205.031018] i915 device info: has_oa_bpc_reporting: no <7> [205.031021] i915 device info: has_oa_slice_contrib_limits: no <7> [205.031023] i915 device info: has_oam: no <7> [205.031025] i915 device info: has_one_eu_per_fuse_bit: no <7> [205.031027] i915 device info: has_pxp: no <7> [205.031030] i915 device info: has_rc6: yes <7> [205.031032] i915 device info: has_rc6p: no <7> [205.031035] i915 device info: has_rps: yes <7> [205.031037] i915 device info: has_runtime_pm: yes <7> [205.031039] i915 device info: has_snoop: no <7> [205.031042] i915 device info: has_coherent_ggtt: yes <7> [205.031044] i915 device info: tuning_thread_rr_after_dep: no <7> [205.031047] i915 device info: unfenced_needs_alignment: no <7> [205.031049] i915 device info: hws_needs_physical: no <7> [205.031070] i915 device info: has_pooled_eu: no <7> [205.031073] i915 device info: rawclk rate: 24000 kHz <7> [205.031076] i915 device info: iommu: enabled <7> [205.031079] i915 device info: available engines: 40403 <7> [205.031082] i915 device info: slice total: 1, mask=0001 <7> [205.031086] i915 device info: subslice total: 3 <7> [205.031088] i915 device info: slice0: 3 subslices, mask=00000007 <7> [205.031092] i915 device info: slice1: 0 subslices, mask=00000000 <7> [205.031095] i915 device info: slice2: 0 subslices, mask=00000000 <7> [205.031098] i915 device info: EU total: 24 <7> [205.031101] i915 device info: EU per subslice: 8 <7> [205.031104] i915 device info: has slice power gating: no <7> [205.031107] i915 device info: has subslice power gating: no <7> [205.031110] i915 device info: has EU power gating: yes <6> [205.031113] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [205.031116] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [205.031119] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [205.031124] i915: Performing live selftests with st_random_seed=0xc2380157 st_timeout=500 <6> [205.031127] i915: Running reset <6> [205.031150] i915: Running intel_reset_live_selftests/igt_global_reset <7> [205.031166] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [205.031173] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [205.031178] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [205.031182] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [205.031186] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [205.031226] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [205.031237] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [205.031256] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [205.031266] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [205.032282] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [205.032328] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [205.036823] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [205.037522] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [205.037738] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [205.037743] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [205.038325] i915: Running intel_reset_live_selftests/igt_reset_device_stolen <6> [205.098271] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [205.098277] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [205.100826] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [205.101114] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [205.101314] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [205.101317] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [205.149986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <6> [205.163098] i915: Running intel_reset_live_selftests/igt_reset_engines_stolen <6> [205.591085] i915: Running intel_reset_live_selftests/igt_wedged_reset <7> [205.591097] intel_gt_set_wedged called from igt_wedged_reset+0x25/0x150 [i915] <6> [205.592313] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [205.592318] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [205.597032] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [205.597616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [205.597772] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [205.597775] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [205.597988] i915: Running intel_reset_live_selftests/igt_atomic_reset <7> [205.598122] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [205.598856] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [205.598861] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [205.601291] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [205.601527] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [205.601687] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [205.601690] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [205.602371] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [205.603013] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [205.603017] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [205.605569] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [205.605798] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [205.605988] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [205.605992] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [205.606675] i915: Running intel_reset_live_selftests/igt_atomic_engine_reset <7> [205.606699] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [205.607469] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [205.607474] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [205.610037] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1050MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [205.610290] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [205.610447] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [205.610450] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [205.612612] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [205.613743] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [205.613748] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [205.616011] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [205.616244] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [205.616401] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [205.616404] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [205.616638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [205.616861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [205.617013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [205.617180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [205.617322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [205.636249] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [205.669171] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [205.713352] i915: probe of 0000:00:02.0 failed with error -25 <6> [205.877873] [IGT] i915_selftest: finished subtest reset, SUCCESS

<6> [204.760388] [IGT] i915_selftest: starting dynamic subtest reset

<5> [204.870938] Setting dangerous option enable_guc - tainting kernel

<5> [204.870945] Setting dangerous option live_selftests - tainting kernel

<7> [204.914684] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [204.914942] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [204.915133] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [204.915145] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [204.915286] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [204.915516] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [204.915675] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [204.916304] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [204.916460] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [204.916602] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [204.916754] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [204.916759] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [204.917048] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [204.917066] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [204.917200] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [204.917600] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018

<7> [204.917781] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [204.917941] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [204.918097] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [204.918241] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [204.922372] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [204.922519] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [204.922656] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [204.922793] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [204.923009] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [204.923142] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [204.923240] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [204.923335] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [204.923430] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [204.923548] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [204.923691] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [204.923810] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [204.923964] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [204.924114] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [204.924621] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [204.924775] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [204.924974] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [204.925167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [204.925314] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [204.925459] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [204.925616] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [204.925812] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [204.926040] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [204.926188] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [204.926333] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [204.926483] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [204.926657] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [204.926852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [204.927011] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [204.927156] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [204.927300] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [204.927444] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [204.927622] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [204.927798] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [204.928000] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [204.928149] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [204.928288] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [204.928428] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [204.928582] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [204.928783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [204.929011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [204.929170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [204.929314] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [204.929910] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [204.930058] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [204.930213] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [204.930447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [204.930638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [204.930780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [204.930941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [204.931117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [204.931297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [204.931486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [204.931642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [204.931815] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [204.932748] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [204.933264] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [204.933660] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [204.933819] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [204.934005] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [204.934168] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [204.934302] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [204.934435] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [204.934566] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [204.934708] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [204.934849] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [204.935023] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [204.936571] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [204.937908] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [204.938129] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [204.938260] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [204.938601] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [204.938729] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [204.938983] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] Using AUX CH A (VBT)

<7> [204.939202] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E]

<7> [204.939528] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [204.939955] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [204.940197] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [204.940435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [204.940589] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [204.940754] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [204.940983] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [204.941192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [204.941399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [204.941577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [204.941720] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [204.941881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [204.942082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [204.942291] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [204.942498] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [204.942676] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [204.942829] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [204.943030] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [204.943241] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [204.943450] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [204.943665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [204.943839] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [204.944063] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [204.944266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [204.944462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [204.944609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [204.944763] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [204.944974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [204.945172] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [204.945370] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [204.945534] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [204.945692] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [204.945882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [204.946097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [204.946296] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [204.946515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [204.946659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [204.946810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [204.946997] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [204.947203] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [204.947399] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [204.947588] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [204.950290] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [204.950446] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [204.950571] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [204.950700] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [204.950847] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global

<7> [204.952058] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [204.952201] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [204.952337] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0

<7> [204.955358] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [204.955534] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [204.955697] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [204.982389] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [204.982559] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [204.982694] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [204.982826] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [204.983022] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [204.983214] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004

<7> [204.983408] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [204.983601] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [204.983763] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [204.983916] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [204.984052] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [204.984187] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [204.984322] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [204.984457] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [204.984592] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [204.985951] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [204.985955] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [204.992734] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [204.993206] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [204.993362] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [204.993365] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [205.001220] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [205.001350] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [205.001462] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [205.001571] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [205.001942] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [205.002309] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [205.002494] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [205.002634] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [205.002765] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [205.002960] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [205.007617] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [205.008180] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [205.008714] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1

<7> [205.009639] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<6> [205.009710] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [205.011975] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [205.026593] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [205.027673] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input74

<7> [205.028489] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [205.029268] i915 display info: display version: 9

<7> [205.029272] i915 display info: cursor_needs_physical: no

<7> [205.029273] [drm:drm_client_modeset_probe]

<7> [205.029275] i915 display info: has_cdclk_crawl: no

<7> [205.029277] i915 display info: has_cdclk_squash: no

<7> [205.029280] i915 display info: has_ddi: yes

<7> [205.029283] i915 display info: has_dp_mst: yes

<7> [205.029286] i915 display info: has_dsb: no

<7> [205.029289] i915 display info: has_fpga_dbg: yes

<7> [205.029292] i915 display info: has_gmch: no

<7> [205.029295] i915 display info: has_hotplug: yes

<7> [205.029298] i915 display info: has_hti: no

<7> [205.029301] i915 display info: has_ipc: yes

<7> [205.029303] i915 display info: has_overlay: no

<7> [205.029306] i915 display info: has_psr: yes

<7> [205.029309] i915 display info: has_psr_hw_tracking: yes

<7> [205.029309] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [205.029311] i915 display info: overlay_needs_physical: no

<7> [205.029313] i915 display info: supports_tv: no

<7> [205.029316] i915 display info: has_hdcp: yes

<7> [205.029319] i915 display info: has_dmc: yes

<7> [205.029322] i915 display info: has_dsc: no

<7> [205.029317] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [205.029326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [205.029459] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [205.029470] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [205.029475] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [205.029479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [205.029608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [205.029616] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [205.029619] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [205.029556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [205.029624] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [205.029755] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [205.029762] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [205.029766] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [205.029769] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [205.029772] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [205.029774] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [205.029802] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [205.029809] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [205.029823] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [205.029831] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [205.029763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [205.029974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [205.030556] [drm:drm_client_modeset_probe]

<7> [205.030590] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [205.030596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [205.030732] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [205.030737] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [205.030684] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [205.030741] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [205.030869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [205.030873] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [205.030917] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [205.030922] i915 device info: graphics version: 9

<7> [205.030925] i915 device info: media version: 9

<7> [205.030928] i915 device info: graphics stepping: F0

<7> [205.030931] i915 device info: media stepping: F0

<7> [205.030934] i915 device info: display stepping: C0

<7> [205.030937] i915 device info: base die stepping: **

<7> [205.030940] i915 device info: gt: 2

<7> [205.030943] i915 device info: memory-regions: 0x21

<7> [205.030945] i915 device info: page-sizes: 0x11000

<7> [205.030948] i915 device info: platform: KABYLAKE

<7> [205.030951] i915 device info: ppgtt-size: 48

<7> [205.030954] i915 device info: ppgtt-type: 2

<7> [205.030957] i915 device info: dma_mask_size: 39

<7> [205.030877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [205.030960] i915 device info: is_mobile: no

<7> [205.030962] i915 device info: is_lp: no

<7> [205.030965] i915 device info: require_force_probe: no

<7> [205.030967] i915 device info: is_dgfx: no

<7> [205.030970] i915 device info: has_64bit_reloc: yes

<7> [205.030972] i915 device info: has_64k_pages: no

<7> [205.030975] i915 device info: gpu_reset_clobbers_display: no

<7> [205.030977] i915 device info: has_reset_engine: yes

<7> [205.030979] i915 device info: has_3d_pipeline: yes

<7> [205.030982] i915 device info: has_flat_ccs: no

<7> [205.030984] i915 device info: has_global_mocs: no

<7> [205.030987] i915 device info: has_gmd_id: no

<7> [205.030989] i915 device info: has_gt_uc: yes

<7> [205.030992] i915 device info: has_heci_pxp: no

<7> [205.030994] i915 device info: has_heci_gscfi: no

<7> [205.030996] i915 device info: has_guc_deprivilege: no

<7> [205.030999] i915 device info: has_guc_tlb_invalidation: no

<7> [205.031001] i915 device info: has_l3_ccs_read: no

<7> [205.031004] i915 device info: has_l3_dpf: no

<7> [205.031006] i915 device info: has_llc: yes

<7> [205.031008] i915 device info: has_logical_ring_contexts: yes

<7> [205.031011] i915 device info: has_logical_ring_elsq: no

<7> [205.031013] i915 device info: has_media_ratio_mode: no

<7> [205.031016] i915 device info: has_mslice_steering: no

<7> [205.031018] i915 device info: has_oa_bpc_reporting: no

<7> [205.031021] i915 device info: has_oa_slice_contrib_limits: no

<7> [205.031023] i915 device info: has_oam: no

<7> [205.031025] i915 device info: has_one_eu_per_fuse_bit: no

<7> [205.031027] i915 device info: has_pxp: no

<7> [205.031030] i915 device info: has_rc6: yes

<7> [205.031032] i915 device info: has_rc6p: no

<7> [205.031035] i915 device info: has_rps: yes

<7> [205.031037] i915 device info: has_runtime_pm: yes

<7> [205.031039] i915 device info: has_snoop: no

<7> [205.031042] i915 device info: has_coherent_ggtt: yes

<7> [205.031044] i915 device info: tuning_thread_rr_after_dep: no

<7> [205.031047] i915 device info: unfenced_needs_alignment: no

<7> [205.031049] i915 device info: hws_needs_physical: no

<7> [205.031070] i915 device info: has_pooled_eu: no

<7> [205.031073] i915 device info: rawclk rate: 24000 kHz

<7> [205.031076] i915 device info: iommu: enabled

<7> [205.031079] i915 device info: available engines: 40403

<7> [205.031082] i915 device info: slice total: 1, mask=0001

<7> [205.031086] i915 device info: subslice total: 3

<7> [205.031088] i915 device info: slice0: 3 subslices, mask=00000007

<7> [205.031092] i915 device info: slice1: 0 subslices, mask=00000000

<7> [205.031095] i915 device info: slice2: 0 subslices, mask=00000000

<7> [205.031098] i915 device info: EU total: 24

<7> [205.031101] i915 device info: EU per subslice: 8

<7> [205.031104] i915 device info: has slice power gating: no

<7> [205.031107] i915 device info: has subslice power gating: no

<7> [205.031110] i915 device info: has EU power gating: yes

<6> [205.031113] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [205.031116] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [205.031119] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [205.031124] i915: Performing live selftests with st_random_seed=0xc2380157 st_timeout=500

<6> [205.031150] i915: Running intel_reset_live_selftests/igt_global_reset

<7> [205.031166] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [205.031173] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [205.031178] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [205.031182] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [205.031186] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [205.031226] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [205.031237] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [205.031256] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [205.031266] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [205.032282] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [205.032328] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [205.036823] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [205.037522] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [205.037738] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [205.037743] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [205.038325] i915: Running intel_reset_live_selftests/igt_reset_device_stolen

<6> [205.098271] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [205.098277] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [205.100826] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [205.101114] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [205.101314] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [205.101317] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [205.149986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<6> [205.163098] i915: Running intel_reset_live_selftests/igt_reset_engines_stolen

<6> [205.591085] i915: Running intel_reset_live_selftests/igt_wedged_reset

<7> [205.591097] intel_gt_set_wedged called from igt_wedged_reset+0x25/0x150 [i915]

<6> [205.592313] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [205.592318] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [205.597032] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [205.597616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [205.597772] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [205.597775] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [205.597988] i915: Running intel_reset_live_selftests/igt_atomic_reset

<7> [205.598122] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [205.598856] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [205.598861] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [205.601291] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [205.601527] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [205.601687] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [205.601690] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [205.602371] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [205.603013] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [205.603017] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [205.605569] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [205.605798] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [205.605988] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [205.605992] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [205.606675] i915: Running intel_reset_live_selftests/igt_atomic_engine_reset

<7> [205.606699] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [205.607469] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [205.607474] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [205.610037] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1050MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [205.610290] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [205.610447] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [205.610450] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [205.612612] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [205.613743] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [205.613748] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [205.616011] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [205.616244] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [205.616401] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [205.616404] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [205.616638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [205.616861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [205.617013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [205.617180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [205.617322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [205.636249] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [205.669171] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [205.713352] i915: probe of 0000:00:02.0 failed with error -25

<6> [205.877873] [IGT] i915_selftest: finished subtest reset, SUCCESS

Results for igt@i915_selftest@live@reset