igt@i915_selftest@live@objects on fi-cfl-8109u@linus-v6.7-rc1 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-g453b9df12 (x86_64) (Linux: 6.7.0-rc1-linus-v6.7-rc1-gb85ea95d0864+ x86_64)
Out	Starting dynamic subtest: objects Dynamic subtest objects: SUCCESS (1.666s)
Err	Starting dynamic subtest: objects Dynamic subtest objects: SUCCESS (1.666s)
Dmesg	<6> [281.243278] [IGT] i915_selftest: starting dynamic subtest objects <5> [281.374550] Setting dangerous option live_selftests - tainting kernel <7> [281.427737] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [281.428065] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [281.428304] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Cannon Lake LP PCH (CNP-LP) <7> [281.428518] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [281.428857] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [281.429098] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <6> [281.429781] i915 0000:00:02.0: [drm] Found 128MB of eDRAM <7> [281.429915] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [281.430097] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [281.430303] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [281.430518] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [281.430526] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [281.430936] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [281.430960] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 3ff00047 <7> [281.431162] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [281.431602] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x3a332018 <7> [281.431900] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [281.432145] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [281.432340] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [281.432533] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [281.439240] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [281.439479] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [281.439718] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [281.440041] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [281.440368] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [281.440696] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no <7> [281.441010] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [281.441264] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [281.441518] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no <7> [281.441781] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [281.442035] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [281.442350] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [281.442641] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [281.442895] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [281.443576] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [281.443931] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 228 <7> [281.444274] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [281.444654] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 317, min size 5) <7> [281.445000] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [281.445341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [281.445693] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812) <7> [281.446080] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 30, min size 34) <7> [281.446472] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [281.446826] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [281.447165] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [281.447504] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 54, min size 78) <7> [281.447912] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [281.448268] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [281.448597] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [281.448946] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [281.449284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [281.449612] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:1 USB-Type-C:0 TBT:0 DSC:0 <7> [281.449977] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [281.450306] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT DP max link rate: 810000 <7> [281.450645] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0 <7> [281.450975] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [281.451327] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT DP max link rate: 810000 <7> [281.451668] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [281.452022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.452450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [281.452891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [281.453315] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [281.453666] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [281.454001] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [281.454338] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [281.454880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [281.455214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [281.455549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.455917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [281.456348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [281.456705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [281.457045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [281.457427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [281.457860] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [281.458452] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [281.460228] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [281.460228] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [281.460550] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [281.460884] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [281.461223] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [281.461526] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [281.461855] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [281.462153] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [281.462369] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [281.462587] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [281.462806] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [281.466994] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [281.469012] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [281.470756] i915 0000:00:02.0: [drm:intel_ddi_init [i915]] VBT says port B has lspcon <7> [281.471104] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT) <7> [281.471447] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [281.472347] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [281.472703] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI C/PHY C] Using AUX CH C (VBT) <7> [281.473043] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI C/PHY C] <7> [281.473706] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [281.474082] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI C/PHY C] <7> [281.474383] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI C/PHY C] Using DDC pin 0x2 (VBT) <7> [281.475130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [281.475444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [281.475851] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [281.476064] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [281.476272] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [281.476479] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [281.476708] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [281.476962] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [281.477190] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [281.477500] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [281.477857] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [281.478181] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [281.478509] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [281.478840] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [281.479126] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [281.479399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [281.479689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI C/PHY C] hw state readout: disabled, pipe A <7> [281.479918] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A <7> [281.480118] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B <7> [281.480315] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C <7> [281.480522] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [281.480756] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [281.481014] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [281.481258] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [281.481517] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [281.481768] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-2] hw state readout: disabled <7> [281.481983] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:HDMI-A-1] hw state readout: disabled <7> [281.482182] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [281.482378] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [281.482597] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [281.482865] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [281.483135] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [281.483339] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [281.483538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [281.483755] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [281.484005] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [281.484208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [281.484405] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [281.484660] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [281.484963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [281.485227] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [281.485435] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [281.485665] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [281.485893] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [281.486094] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [281.486291] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [281.486599] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [281.486803] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [281.487040] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [281.487241] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [281.488637] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [281.488869] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [281.489065] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0 <7> [281.504865] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [281.505068] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [281.505222] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [281.505373] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'1 to vcs1 <7> [281.505522] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [281.506073] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [281.506424] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [281.506642] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [281.506893] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [281.507116] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [281.507390] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [281.513969] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [281.517274] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2 <7> [281.518577] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.520425] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.521996] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.523616] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.525668] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.526517] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [281.527034] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.528691] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.530088] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.531399] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.533227] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.534842] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.535723] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a8 (err 0) <7> [281.535748] i915 0000:00:02.0: [drm:lspcon_init [i915]] LSPCON detected <7> [281.536916] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.538470] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.539997] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.542072] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.543663] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.545424] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.547163] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.548915] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.550523] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [281.551388] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON <7> [281.552329] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04 <7> [281.552844] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.75 quirks 0x0000 <7> [281.552873] i915 0000:00:02.0: [drm:lspcon_init [i915]] Vendor: Mega Chips <7> [281.553145] i915 0000:00:02.0: [drm:lspcon_init [i915]] Success: LSPCON init <7> [281.553784] i915 0000:00:02.0: [drm:lspcon_detect_hdr_capability [i915]] LSPCON capable of HDR <7> [281.553997] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [281.554514] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [281.555866] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-2] generating connector hotplug event <7> [281.556598] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:HDMI-A-1] generating connector hotplug event <6> [281.556715] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [281.560258] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [281.581349] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [281.585005] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input47 <7> [281.586125] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [281.587268] i915 display info: display version: 9 <7> [281.587274] i915 display info: cursor_needs_physical: no <7> [281.587278] i915 display info: has_cdclk_crawl: no <7> [281.587281] i915 display info: has_cdclk_squash: no <7> [281.587284] i915 display info: has_ddi: yes <7> [281.587288] i915 display info: has_dp_mst: yes <7> [281.587291] i915 display info: has_dsb: no <7> [281.587295] i915 display info: has_fpga_dbg: yes <7> [281.587298] i915 display info: has_gmch: no <7> [281.587301] i915 display info: has_hotplug: yes <7> [281.587305] i915 display info: has_hti: no <7> [281.587308] i915 display info: has_ipc: yes <7> [281.587312] i915 display info: has_overlay: no <7> [281.587315] i915 display info: has_psr: yes <7> [281.587318] i915 display info: has_psr_hw_tracking: yes <7> [281.587322] i915 display info: overlay_needs_physical: no <7> [281.587325] i915 display info: supports_tv: no <7> [281.587329] i915 display info: has_hdcp: yes <7> [281.587332] i915 display info: has_dmc: yes <7> [281.587336] i915 display info: has_dsc: no <7> [281.587379] [drm:drm_client_modeset_probe] <7> [281.587443] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [281.587342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [281.587455] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [281.587798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [281.587818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [281.587742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [281.588069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [281.588394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [281.589408] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [281.589748] i915 device info: pciid=0x3ea5 rev=0x01 platform=COFFEELAKE (subplatform=0x1) gen=9 <7> [281.589755] i915 device info: graphics version: 9 <7> [281.589759] i915 device info: media version: 9 <7> [281.589762] i915 device info: graphics stepping: <7> [281.589765] i915 device info: media stepping: <7> [281.589769] i915 device info: display stepping: <7> [281.589772] i915 device info: base die stepping: <7> [281.589776] i915 device info: gt: 3 <7> [281.589780] i915 device info: memory-regions: 0x21 <7> [281.589784] i915 device info: page-sizes: 0x11000 <7> [281.589787] i915 device info: platform: COFFEELAKE <7> [281.589791] i915 device info: ppgtt-size: 48 <7> [281.589795] i915 device info: ppgtt-type: 2 <7> [281.589798] i915 device info: dma_mask_size: 39 <7> [281.589802] i915 device info: is_mobile: no <7> [281.589806] i915 device info: is_lp: no <7> [281.589865] i915 device info: require_force_probe: no <7> [281.589869] i915 device info: is_dgfx: no <7> [281.589872] i915 device info: has_64bit_reloc: yes <7> [281.589876] i915 device info: has_64k_pages: no <7> [281.589880] i915 device info: gpu_reset_clobbers_display: no <7> [281.589884] i915 device info: has_reset_engine: yes <7> [281.589887] i915 device info: has_3d_pipeline: yes <7> [281.589891] i915 device info: has_flat_ccs: no <7> [281.589895] i915 device info: has_global_mocs: no <7> [281.589899] i915 device info: has_gmd_id: no <7> [281.589902] i915 device info: has_gt_uc: yes <7> [281.589906] i915 device info: has_heci_pxp: no <7> [281.589910] i915 device info: has_heci_gscfi: no <7> [281.589913] i915 device info: has_guc_deprivilege: no <7> [281.589917] i915 device info: has_guc_tlb_invalidation: no <7> [281.589921] i915 device info: has_l3_ccs_read: no <7> [281.589924] i915 device info: has_l3_dpf: no <7> [281.589928] i915 device info: has_llc: yes <7> [281.589932] i915 device info: has_logical_ring_contexts: yes <7> [281.589936] i915 device info: has_logical_ring_elsq: no <7> [281.589940] i915 device info: has_media_ratio_mode: no <7> [281.589943] i915 device info: has_mslice_steering: no <7> [281.589947] i915 device info: has_oa_bpc_reporting: no <7> [281.589951] i915 device info: has_oa_slice_contrib_limits: no <7> [281.589955] i915 device info: has_oam: no <7> [281.589959] i915 device info: has_one_eu_per_fuse_bit: no <7> [281.589962] i915 device info: has_pxp: no <7> [281.589966] i915 device info: has_rc6: yes <7> [281.589970] i915 device info: has_rc6p: no <7> [281.589973] i915 device info: has_rps: yes <7> [281.589977] i915 device info: has_runtime_pm: yes <7> [281.589981] i915 device info: has_snoop: no <7> [281.589984] i915 device info: has_coherent_ggtt: yes <7> [281.589988] i915 device info: tuning_thread_rr_after_dep: no <7> [281.589992] i915 device info: unfenced_needs_alignment: no <7> [281.589996] i915 device info: hws_needs_physical: no <7> [281.589999] i915 device info: has_pooled_eu: no <7> [281.590003] i915 device info: rawclk rate: 24000 kHz <7> [281.590007] i915 device info: iommu: enabled <7> [281.590011] i915 device info: available engines: 40c03 <7> [281.590015] i915 device info: slice total: 2, mask=0003 <7> [281.590020] i915 device info: subslice total: 6 <7> [281.590024] i915 device info: slice0: 3 subslices, mask=00000007 <7> [281.590028] i915 device info: slice1: 3 subslices, mask=00000007 <7> [281.590032] i915 device info: slice2: 0 subslices, mask=00000000 <7> [281.590036] i915 device info: EU total: 47 <7> [281.590040] i915 device info: EU per subslice: 8 <7> [281.590044] i915 device info: has slice power gating: yes <7> [281.590047] i915 device info: has subslice power gating: no <7> [281.590051] i915 device info: has EU power gating: yes <6> [281.590055] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [281.590059] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [281.590064] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [281.590070] i915: Performing live selftests with st_random_seed=0x83843dfb st_timeout=500 <6> [281.590074] i915: Running objects <6> [281.590104] i915: Running i915_gem_object_live_selftests/igt_gem_huge <7> [281.590642] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] <7> [281.590655] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2] <7> [281.590991] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] status updated from unknown to disconnected <7> [281.591006] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected <7> [281.591015] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [281.591024] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [281.591329] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from unknown to disconnected <7> [281.591345] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <7> [281.591352] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [281.591359] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [281.591365] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [281.591370] [drm:drm_client_modeset_probe] connector 114 enabled? no <7> [281.591431] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [281.591447] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [281.591476] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [281.591490] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [281.592769] [drm:drm_client_modeset_probe] <7> [281.592822] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [281.592834] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [281.593230] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [281.593240] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] <7> [281.593249] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2] <7> [281.593558] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected <7> [281.593566] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [281.593574] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [281.593889] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <7> [281.593897] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [281.593904] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [281.593909] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [281.593915] [drm:drm_client_modeset_probe] connector 114 enabled? no <7> [281.593960] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [281.593974] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [281.594001] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [281.594014] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [281.594101] [drm:drm_client_modeset_probe] <7> [281.594153] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [281.594162] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [281.594495] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [281.594504] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] <7> [281.594512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2] <7> [281.594847] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected <7> [281.594856] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [281.594865] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [281.595188] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <7> [281.595196] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [281.595203] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [281.595209] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [281.595215] [drm:drm_client_modeset_probe] connector 114 enabled? no <7> [281.595262] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [281.595276] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [281.595301] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [281.595312] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [281.682703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [281.700898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [281.701164] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [281.701383] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [281.702052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [282.610798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [282.611081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [282.611580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [282.612126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [282.612493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [282.612728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [282.612969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [282.613176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [282.631167] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [282.675363] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [282.711095] i915: probe of 0000:00:02.0 failed with error -25 <6> [282.910126] [IGT] i915_selftest: finished subtest objects, SUCCESS

<6> [281.243278] [IGT] i915_selftest: starting dynamic subtest objects

<5> [281.374550] Setting dangerous option live_selftests - tainting kernel

<7> [281.427737] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [281.428065] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [281.428304] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Cannon Lake LP PCH (CNP-LP)

<7> [281.428518] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [281.428857] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [281.429098] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<6> [281.429781] i915 0000:00:02.0: [drm] Found 128MB of eDRAM

<7> [281.429915] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [281.430097] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [281.430303] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [281.430518] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [281.430526] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [281.430936] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [281.430960] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 3ff00047

<7> [281.431162] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [281.431602] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x3a332018

<7> [281.431900] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [281.432145] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [281.432340] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [281.432533] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [281.439240] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [281.439479] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [281.439718] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [281.440041] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [281.440368] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [281.440696] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no

<7> [281.441010] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [281.441264] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [281.441518] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no

<7> [281.441781] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [281.442035] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [281.442350] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [281.442641] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [281.442895] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [281.443576] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [281.443931] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 228

<7> [281.444274] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [281.444654] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 317, min size 5)

<7> [281.445000] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [281.445341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [281.445693] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812)

<7> [281.446080] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 30, min size 34)

<7> [281.446472] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [281.446826] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [281.447165] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [281.447504] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 54, min size 78)

<7> [281.447912] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [281.448268] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [281.448597] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [281.448946] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [281.449284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [281.449612] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:1 USB-Type-C:0 TBT:0 DSC:0

<7> [281.449977] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [281.450306] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT DP max link rate: 810000

<7> [281.450645] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0

<7> [281.450975] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [281.451327] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT DP max link rate: 810000

<7> [281.451668] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [281.452022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.452450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [281.452891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [281.453315] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [281.453666] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [281.454001] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [281.454338] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [281.454880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [281.455214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [281.455549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.455917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [281.456348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [281.456705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [281.457045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [281.457427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [281.457860] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [281.458452] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [281.460228] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [281.460228] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [281.460550] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [281.460884] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [281.461223] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [281.461526] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [281.461855] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [281.462153] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [281.462369] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [281.462587] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [281.462806] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [281.466994] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [281.469012] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [281.470756] i915 0000:00:02.0: [drm:intel_ddi_init [i915]] VBT says port B has lspcon

<7> [281.471104] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT)

<7> [281.471447] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [281.472347] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [281.472703] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI C/PHY C] Using AUX CH C (VBT)

<7> [281.473043] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI C/PHY C]

<7> [281.473706] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [281.474082] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI C/PHY C]

<7> [281.474383] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI C/PHY C] Using DDC pin 0x2 (VBT)

<7> [281.475130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [281.475444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [281.475851] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [281.476064] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [281.476272] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [281.476479] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [281.476708] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [281.476962] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [281.477190] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [281.477500] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [281.477857] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [281.478181] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [281.478509] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [281.478840] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [281.479126] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [281.479399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [281.479689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [281.479918] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A

<7> [281.480118] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B

<7> [281.480315] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C

<7> [281.480522] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [281.480756] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [281.481014] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [281.481258] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [281.481517] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [281.481768] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-2] hw state readout: disabled

<7> [281.481983] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:HDMI-A-1] hw state readout: disabled

<7> [281.482182] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [281.482378] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [281.482597] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [281.482865] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [281.483135] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [281.483339] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [281.483538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [281.483755] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [281.484005] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [281.484208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [281.484405] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [281.484660] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [281.484963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [281.485227] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [281.485435] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [281.485665] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [281.485893] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [281.486094] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [281.486291] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [281.486599] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [281.486803] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [281.487040] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [281.487241] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [281.488637] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [281.488869] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [281.489065] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0

<7> [281.504865] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [281.505068] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [281.505222] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [281.505373] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'1 to vcs1

<7> [281.505522] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [281.506073] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [281.506424] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [281.506642] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [281.506893] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [281.507116] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [281.507390] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [281.513969] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [281.517274] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2

<7> [281.518577] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.520425] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.521996] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.523616] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.525668] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.526517] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [281.527034] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.528691] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.530088] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.531399] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.533227] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.534842] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.535723] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a8 (err 0)

<7> [281.535748] i915 0000:00:02.0: [drm:lspcon_init [i915]] LSPCON detected

<7> [281.536916] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.538470] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.539997] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.542072] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.543663] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.545424] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.547163] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.548915] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.550523] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [281.551388] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON

<7> [281.552329] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04

<7> [281.552844] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.75 quirks 0x0000

<7> [281.552873] i915 0000:00:02.0: [drm:lspcon_init [i915]] Vendor: Mega Chips

<7> [281.553145] i915 0000:00:02.0: [drm:lspcon_init [i915]] Success: LSPCON init

<7> [281.553784] i915 0000:00:02.0: [drm:lspcon_detect_hdr_capability [i915]] LSPCON capable of HDR

<7> [281.553997] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [281.554514] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [281.555866] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-2] generating connector hotplug event

<7> [281.556598] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:HDMI-A-1] generating connector hotplug event

<6> [281.556715] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [281.560258] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [281.581349] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [281.585005] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input47

<7> [281.586125] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [281.587268] i915 display info: display version: 9

<7> [281.587274] i915 display info: cursor_needs_physical: no

<7> [281.587278] i915 display info: has_cdclk_crawl: no

<7> [281.587281] i915 display info: has_cdclk_squash: no

<7> [281.587284] i915 display info: has_ddi: yes

<7> [281.587288] i915 display info: has_dp_mst: yes

<7> [281.587291] i915 display info: has_dsb: no

<7> [281.587295] i915 display info: has_fpga_dbg: yes

<7> [281.587298] i915 display info: has_gmch: no

<7> [281.587301] i915 display info: has_hotplug: yes

<7> [281.587305] i915 display info: has_hti: no

<7> [281.587308] i915 display info: has_ipc: yes

<7> [281.587312] i915 display info: has_overlay: no

<7> [281.587315] i915 display info: has_psr: yes

<7> [281.587318] i915 display info: has_psr_hw_tracking: yes

<7> [281.587322] i915 display info: overlay_needs_physical: no

<7> [281.587325] i915 display info: supports_tv: no

<7> [281.587329] i915 display info: has_hdcp: yes

<7> [281.587332] i915 display info: has_dmc: yes

<7> [281.587336] i915 display info: has_dsc: no

<7> [281.587379] [drm:drm_client_modeset_probe]

<7> [281.587443] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [281.587342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [281.587455] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [281.587798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [281.587818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [281.587742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [281.588069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [281.588394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [281.589408] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [281.589748] i915 device info: pciid=0x3ea5 rev=0x01 platform=COFFEELAKE (subplatform=0x1) gen=9

<7> [281.589755] i915 device info: graphics version: 9

<7> [281.589759] i915 device info: media version: 9

<7> [281.589762] i915 device info: graphics stepping: **

<7> [281.589765] i915 device info: media stepping: **

<7> [281.589769] i915 device info: display stepping: **

<7> [281.589772] i915 device info: base die stepping: **

<7> [281.589776] i915 device info: gt: 3

<7> [281.589780] i915 device info: memory-regions: 0x21

<7> [281.589784] i915 device info: page-sizes: 0x11000

<7> [281.589787] i915 device info: platform: COFFEELAKE

<7> [281.589791] i915 device info: ppgtt-size: 48

<7> [281.589795] i915 device info: ppgtt-type: 2

<7> [281.589798] i915 device info: dma_mask_size: 39

<7> [281.589802] i915 device info: is_mobile: no

<7> [281.589806] i915 device info: is_lp: no

<7> [281.589865] i915 device info: require_force_probe: no

<7> [281.589869] i915 device info: is_dgfx: no

<7> [281.589872] i915 device info: has_64bit_reloc: yes

<7> [281.589876] i915 device info: has_64k_pages: no

<7> [281.589880] i915 device info: gpu_reset_clobbers_display: no

<7> [281.589884] i915 device info: has_reset_engine: yes

<7> [281.589887] i915 device info: has_3d_pipeline: yes

<7> [281.589891] i915 device info: has_flat_ccs: no

<7> [281.589895] i915 device info: has_global_mocs: no

<7> [281.589899] i915 device info: has_gmd_id: no

<7> [281.589902] i915 device info: has_gt_uc: yes

<7> [281.589906] i915 device info: has_heci_pxp: no

<7> [281.589910] i915 device info: has_heci_gscfi: no

<7> [281.589913] i915 device info: has_guc_deprivilege: no

<7> [281.589917] i915 device info: has_guc_tlb_invalidation: no

<7> [281.589921] i915 device info: has_l3_ccs_read: no

<7> [281.589924] i915 device info: has_l3_dpf: no

<7> [281.589928] i915 device info: has_llc: yes

<7> [281.589932] i915 device info: has_logical_ring_contexts: yes

<7> [281.589936] i915 device info: has_logical_ring_elsq: no

<7> [281.589940] i915 device info: has_media_ratio_mode: no

<7> [281.589943] i915 device info: has_mslice_steering: no

<7> [281.589947] i915 device info: has_oa_bpc_reporting: no

<7> [281.589951] i915 device info: has_oa_slice_contrib_limits: no

<7> [281.589955] i915 device info: has_oam: no

<7> [281.589959] i915 device info: has_one_eu_per_fuse_bit: no

<7> [281.589962] i915 device info: has_pxp: no

<7> [281.589966] i915 device info: has_rc6: yes

<7> [281.589970] i915 device info: has_rc6p: no

<7> [281.589973] i915 device info: has_rps: yes

<7> [281.589977] i915 device info: has_runtime_pm: yes

<7> [281.589981] i915 device info: has_snoop: no

<7> [281.589984] i915 device info: has_coherent_ggtt: yes

<7> [281.589988] i915 device info: tuning_thread_rr_after_dep: no

<7> [281.589992] i915 device info: unfenced_needs_alignment: no

<7> [281.589996] i915 device info: hws_needs_physical: no

<7> [281.589999] i915 device info: has_pooled_eu: no

<7> [281.590003] i915 device info: rawclk rate: 24000 kHz

<7> [281.590007] i915 device info: iommu: enabled

<7> [281.590011] i915 device info: available engines: 40c03

<7> [281.590015] i915 device info: slice total: 2, mask=0003

<7> [281.590020] i915 device info: subslice total: 6

<7> [281.590024] i915 device info: slice0: 3 subslices, mask=00000007

<7> [281.590028] i915 device info: slice1: 3 subslices, mask=00000007

<7> [281.590032] i915 device info: slice2: 0 subslices, mask=00000000

<7> [281.590036] i915 device info: EU total: 47

<7> [281.590040] i915 device info: EU per subslice: 8

<7> [281.590044] i915 device info: has slice power gating: yes

<7> [281.590047] i915 device info: has subslice power gating: no

<7> [281.590051] i915 device info: has EU power gating: yes

<6> [281.590055] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [281.590059] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [281.590064] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [281.590070] i915: Performing live selftests with st_random_seed=0x83843dfb st_timeout=500

<6> [281.590104] i915: Running i915_gem_object_live_selftests/igt_gem_huge

<7> [281.590642] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]

<7> [281.590655] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]

<7> [281.590991] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] status updated from unknown to disconnected

<7> [281.591006] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected

<7> [281.591015] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [281.591024] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [281.591329] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from unknown to disconnected

<7> [281.591345] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<7> [281.591352] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [281.591359] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [281.591365] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [281.591370] [drm:drm_client_modeset_probe] connector 114 enabled? no

<7> [281.591431] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [281.591447] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [281.591476] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [281.591490] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [281.592769] [drm:drm_client_modeset_probe]

<7> [281.592822] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [281.592834] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [281.593230] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [281.593240] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]

<7> [281.593249] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]

<7> [281.593558] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected

<7> [281.593566] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [281.593574] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [281.593889] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<7> [281.593897] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [281.593904] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [281.593909] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [281.593915] [drm:drm_client_modeset_probe] connector 114 enabled? no

<7> [281.593960] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [281.593974] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [281.594001] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [281.594014] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [281.594101] [drm:drm_client_modeset_probe]

<7> [281.594153] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [281.594162] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [281.594495] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [281.594504] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]

<7> [281.594512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]

<7> [281.594847] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected

<7> [281.594856] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [281.594865] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [281.595188] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<7> [281.595196] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [281.595203] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [281.595209] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [281.595215] [drm:drm_client_modeset_probe] connector 114 enabled? no

<7> [281.595262] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [281.595276] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [281.595301] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [281.595312] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [281.682703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [281.700898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [281.701164] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [281.701383] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [281.702052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [282.610798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [282.611081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [282.611580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [282.612126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [282.612493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [282.612728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [282.612969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [282.613176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [282.631167] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [282.675363] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [282.711095] i915: probe of 0000:00:02.0 failed with error -25

<6> [282.910126] [IGT] i915_selftest: finished subtest objects, SUCCESS

Results for igt@i915_selftest@live@objects