Results for igt@kms_pm_rpm@basic-rte

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.28-g5e82a8ee4 (x86_64) (Linux: 6.6.0-linus-v6.6-gffc253263a13+ x86_64)
Out 
Starting subtest: basic-rte
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x95/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1ec/0x740
   drm_ioctl_kernel+0xb6/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x7c/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915]
   __intel_runtime_pm_put+0x159/0x2b0 [i915]
   intel_display_power_flush_work+0xe9/0x100 [i915]
   intel_dp_detect+0x231/0x630 [i915]
   drm_helper_probe_detect_ctx+0x45/0x100
   check_connector_changed+0x47/0x1b0
   drm_helper_hpd_irq_event+0x96/0x110
Wakeref count: 1
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   __intel_display_power_put_async+0x3d/0x160 [i915]
   intel_atomic_commit_tail+0xa2e/0xd20 [i915]
   intel_atomic_commit+0x381/0x400 [i915]
   drm_atomic_commit+0x95/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1ec/0x740
   drm_ioctl_kernel+0xb6/0x150
Subtest basic-rte: SUCCESS (11.732s)
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x95/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1ec/0x740
   drm_ioctl_kernel+0xb6/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x7c/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915]
   intel_runtime_suspend+0xec/0x2a0 [i915]
   pci_pm_runtime_suspend+0x5d/0x1a0
   __rpm_callback+0x3f/0x110
   rpm_callback+0x58/0x70
   rpm_suspend+0x118/0x5f0
   pm_runtime_work+0x9f/0xb0
Wakeref count: 1
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   __intel_display_power_put_async+0x3d/0x160 [i915]
   intel_atomic_commit_tail+0xa2e/0xd20 [i915]
   intel_atomic_commit+0x381/0x400 [i915]
   drm_atomic_commit+0x95/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1ec/0x740
   drm_ioctl_kernel+0xb6/0x150
Err 
Starting subtest: basic-rte
Subtest basic-rte: SUCCESS (11.732s)
Dmesg
<6> [89.347356] Console: switching to colour dummy device 80x25
<6> [89.347408] [IGT] kms_pm_rpm: executing
<6> [89.357794] [IGT] kms_pm_rpm: starting subtest basic-rte
<7> [89.357840] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [89.361600] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [89.361608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [89.361746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [89.362210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [89.362345] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [89.362821] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]
<7> [89.362826] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [89.362949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [89.363414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [89.363931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [89.364510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [89.365846] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [89.366923] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [89.367679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [89.367887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [89.368080] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [89.368227] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [89.368849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [89.368986] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected
<7> [89.369395] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [89.369400] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [89.369549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [89.370649] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [89.371201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [89.371934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [89.372385] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [89.372389] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [89.372511] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [89.399369] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [89.399374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [89.399506] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [89.399719] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [89.400109] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [89.400114] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [89.400239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [89.400717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [89.400853] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [89.400870] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]
<7> [89.400874] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [89.400996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [89.401458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [89.401988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [89.402561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [89.403518] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [89.404329] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [89.405046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [89.405200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [89.405335] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [89.405467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [89.406089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [89.406225] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected
<7> [89.406243] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [89.406248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [89.406368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [89.407441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [89.407592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [89.408368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [89.408888] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [89.408905] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [89.409044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [89.438003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [89.438009] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [89.438123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [89.438255] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [89.438285] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [89.438289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [89.438409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [89.438906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [89.439105] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [89.439144] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]
<7> [89.439148] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [89.439276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [89.439755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [89.440258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [89.440839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [89.442098] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [89.443250] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [89.443871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [89.444035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [89.444169] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [89.444297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [89.444918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [89.445053] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected
<7> [89.445107] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [89.445111] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [89.445232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [89.446313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [89.446519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [89.447235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [89.447812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [89.447816] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [89.447929] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [89.475223] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [89.475229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [89.475343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [89.475476] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [100.518203] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.522436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.547050] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.552420] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.553482] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [100.553535] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.553889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.554574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.554905] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.554924] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.555182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.555820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.556391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.557006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.558368] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.559076] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.559887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.560044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.560181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.560315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.560924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.561111] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.561123] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.561279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.562872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.563016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.564224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.564767] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.564771] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.564882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.590021] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.590026] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.590139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.590278] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.590288] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.593138] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.617474] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.622239] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.622375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.622526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.622981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.623875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.624037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.624181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.624321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.624923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.625004] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [100.625074] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.625082] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.625214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.625696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.626204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.626785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.627902] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.628996] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.629773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.629930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.630067] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.630200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.630814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.630959] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.630965] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.631090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.632166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.632285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.632972] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.633496] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.633501] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.633616] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.659893] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.659898] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.660011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.660150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.661641] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.662966] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.687347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.692751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.692909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.693046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.693557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.694142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.694367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.694587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.694700] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [100.694788] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.695444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.695674] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.695756] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.695899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.696338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.697007] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.697234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.698434] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.699076] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.699882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.700072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.700212] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.700349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.700971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.701187] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.701196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.701386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.702572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.702754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.703527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.704040] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.704047] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.704224] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.733860] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.733867] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.734040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.734244] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.736362] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.738562] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.797974] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [100.810220] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.815036] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.815275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.815598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.816156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.816860] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.817112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.817349] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.817680] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [100.817606] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.818313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.818608] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.818621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.818841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.819417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.819938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.820536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.821687] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.822783] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.823528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.823731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.823900] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.824040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.824651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.824812] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.824819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.824950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.826077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.826202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.826917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.827380] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.827385] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.827519] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.853202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.853207] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.853320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.853460] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.855014] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.856334] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.880786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.886574] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.886872] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.887205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.887876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.888978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.889588] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [100.889530] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.890029] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.890552] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.891547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.892074] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.892097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.892564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.893257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.893934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.894631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.895851] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.896651] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.897333] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.897591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.897803] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.898007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.898682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.898906] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.898916] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.899112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.900289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.900474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.901272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.901822] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.901829] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.902013] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.931073] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.931081] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.931253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.931456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.933659] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.934959] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.959395] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.964099] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.964260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.964413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.964927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.965603] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.965774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.965914] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.966052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.966665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.966853] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.966860] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.966993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.967469] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.967999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.968603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.969951] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.971015] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.971775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.971942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.972075] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.972204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.972822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.972975] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.972981] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.973102] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.974222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.974336] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.975017] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.975575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.975580] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.975720] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [101.000810] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.000815] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.000955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.001093] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [101.002122] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.003504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [101.079221] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [101.086720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [101.086909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.087162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.087804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [101.088095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.088936] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [101.088950] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [101.089301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<6> [101.089846] [IGT] kms_pm_rpm: finished subtest basic-rte, SUCCESS
<7> [101.089894] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [101.090727] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [101.091420] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [101.091997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.092290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.092511] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.092652] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.093247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.093401] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [101.093411] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [101.093560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.094669] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.094794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [101.095500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.096041] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.096049] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [101.096248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [101.120399] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.120405] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.120551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.120750] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.120761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [101.123093] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [101.147529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [101.152335] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [101.152494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.152646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.153111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.153780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [101.153953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.154110] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.154263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.154552] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [101.154890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.155054] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [101.155064] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [101.155208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.155729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.156236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.156817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.158092] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [101.159210] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [101.159985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.160150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.160294] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.160433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.161074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.161243] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [101.161250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [101.161371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.162540] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.163092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [101.164291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.164879] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.164883] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [101.165023] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [101.190198] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.190203] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.190316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.190457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [101.191499] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.193561] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [101.217992] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [101.222865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [101.223044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.223199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.223661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.224361] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [101.224600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.224807] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.225007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.225719] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [101.225677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.225895] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [101.225906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [101.226098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.226654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.227156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.227747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.229109] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [101.229818] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [101.230355] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.230628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.230850] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.231066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.231764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.232003] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [101.232014] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [101.232208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.233408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.233609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [101.234377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.234921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.234929] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [101.235112] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [101.262479] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.262493] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.262692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.262897] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [101.264481] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.266882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [101.291357] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [101.296052] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [101.296191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.296318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.296832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.297429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [101.297676] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.297896] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.298103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.298794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.299002] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [101.299009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [101.299140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.299622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.300128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.300703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.301951] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [101.303015] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [101.303778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.303938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.304078] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.304214] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.304828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.304976] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [101.304982] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [101.305110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.306211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.306332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [101.307025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.307524] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.307529] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [101.307648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [101.335477] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.335482] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.335652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.335860] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [101.337413] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.339531] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [101.411635] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [101.418120] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [101.418463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.418754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.419301] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<6> [101.420186] [IGT] kms_pm_rpm: exiting, ret=0
<7> [101.421777] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [101.422033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.422272] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.422523] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<6> [101.422729] Console: switching to colour frame buffer device 128x48
<7> [101.423221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.423471] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [101.423502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [101.423726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.424299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.424856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.425425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.426738] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [101.427433] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [101.428202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.428365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.428521] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.428661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.429253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.429401] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [101.429478] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [101.429616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.430724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.430847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [101.431568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.432611] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.432615] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [101.432774] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [101.458454] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.458458] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.458611] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.458794] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.458985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.459154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.459650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
Created at 2023-10-31 09:59:03