Results for igt@kms_pm_rpm@basic-rte

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.28-g5e82a8ee4 (x86_64) (Linux: 6.6.0-linus-v6.6-gffc253263a13+ x86_64)
Out 
Starting subtest: basic-rte
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x79/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915]
   __intel_runtime_pm_put+0x159/0x2b0 [i915]
   intel_hdmi_detect+0xcb/0x160 [i915]
   drm_helper_probe_detect_ctx+0x89/0x100
   check_connector_changed+0x47/0x1b0
   drm_helper_hpd_irq_event+0x96/0x110
   i915_hpd_poll_init_work+0xaf/0xf0 [i915]
Wakeref count: 1
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   __intel_display_power_put_async+0x3d/0x160 [i915]
   intel_atomic_commit_tail+0xa2e/0xd20 [i915]
   intel_atomic_commit+0x381/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
Subtest basic-rte: SUCCESS (1.980s)
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   __intel_wakeref_get_first+0x39/0xc0 [i915]
   intel_gt_pm_debugfs_forcewake_user_open+0x67/0x70 [i915]
   i915_forcewake_open+0x1d/0x40 [i915]
   full_proxy_open+0x15d/0x1e0
   do_dentry_open+0x162/0x560
   path_openat+0x666/0x8b0
   do_filp_open+0xb1/0x120
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915]
   intel_runtime_suspend+0xec/0x2a0 [i915]
   pci_pm_runtime_suspend+0x5a/0x1a0
   __rpm_callback+0x3c/0x110
   rpm_callback+0x58/0x70
   rpm_suspend+0x118/0x5f0
   pm_runtime_work+0x9f/0xb0
Wakeref count: 1
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   __intel_display_power_put_async+0x3d/0x160 [i915]
   __gt_park+0x153/0x210 [i915]
   ____intel_wakeref_put_last+0x1f/0x70 [i915]
   intel_gt_pm_debugfs_forcewake_user_release+0x76/0x80 [i915]
   i915_forcewake_release+0x1d/0x40 [i915]
   full_proxy_release+0x39/0xa0
   __fput+0xf8/0x290
Err 
Starting subtest: basic-rte
Subtest basic-rte: SUCCESS (1.980s)
Dmesg
<6> [90.950637] Console: switching to colour dummy device 80x25
<6> [90.950694] [IGT] kms_pm_rpm: executing
<6> [90.953290] [IGT] kms_pm_rpm: starting subtest basic-rte
<7> [90.953346] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [90.958082] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [90.958091] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [90.958220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [90.958843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [90.959081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [90.959377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [90.959805] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [90.959811] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [90.959928] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [90.975362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [90.975367] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [90.975479] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [90.975608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [90.976130] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
<7> [90.976138] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [90.976285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [90.976941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [90.977049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [90.977337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [90.977754] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [90.977758] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [90.977897] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [90.992089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [90.992094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [90.992204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [90.992332] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [90.992811] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]
<7> [90.992817] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [90.992946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [90.993367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [90.993535] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected
<7> [90.993947] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [90.993953] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [90.994069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [90.994729] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [90.994849] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [90.995153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [90.995581] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [90.995587] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [90.995702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [91.009844] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.009849] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [91.009971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.010100] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [91.010121] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
<7> [91.010127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [91.010272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.010921] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.011029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.011360] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.011777] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.011781] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.011942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.027102] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.027107] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.027216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.027346] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [91.027369] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]
<7> [91.027373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [91.027489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.027918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.028048] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected
<7> [91.028077] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [91.028082] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [91.028195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.028828] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [91.028977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [91.029559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [91.030112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.030118] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.030245] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [91.044367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.044372] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [91.044481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.044608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [91.044678] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
<7> [91.044682] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [91.044796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.045771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.045915] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.046206] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.046611] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.046615] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.046753] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.060915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.060921] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.061029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.061158] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [91.061217] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]
<7> [91.061222] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [91.061337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.061754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.061895] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected
<7> [92.064078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.067994] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.079648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.104050] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.110392] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.110939] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.111703] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [92.111840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.112087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.112359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.113041] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.113292] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [92.113439] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.113639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.113996] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.114156] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.114163] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.114346] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.117375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.117383] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.117537] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.117706] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.117869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.118504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.118766] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.118777] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.118983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.120079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.120255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.120585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.121043] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.121050] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.121251] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.136549] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.136557] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.136688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.136854] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.138299] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.139408] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.142015] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.166322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.171469] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.172002] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.172136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.172286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.172718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.173358] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [92.173359] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.173536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.173704] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.173868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.174487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.174670] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.174689] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.174830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.175486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.175611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.175928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.176351] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.176356] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.176478] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.191136] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.191143] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.191258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.191401] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.191513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.191641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.192067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.192652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.193169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.193347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.193717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.193893] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.193915] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.194027] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.196860] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.196865] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.196993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.197119] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.197241] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.197794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.197939] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.197945] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.198062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.198484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.198614] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.198622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.199580] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.202949] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.294117] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [92.306763] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.323614] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.325254] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.325952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.326666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.327701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.329198] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.330177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.331091] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [92.330810] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.331691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.332357] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.332383] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.333011] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.337634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.337662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.338330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.339044] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.339708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.340871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.341647] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.341685] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.342332] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.344076] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.355300] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.380444] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.393988] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.394734] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.394959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.396157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.396397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.397136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.397675] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.397686] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.397935] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.414261] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.414271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.414469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.414718] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.414741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.415772] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.419304] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.443166] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.448886] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.449465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.449638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.449835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.450329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.451055] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [92.451080] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.451321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.451552] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.451774] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.452458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.452692] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.452714] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.452927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.454015] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.454199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.454851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.455381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.455389] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.455567] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.470833] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.470841] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.471047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.471276] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.471295] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.472311] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.476136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.500606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.510197] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.510853] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.511229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.511544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.512166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.513068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.513686] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.514027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.514542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.514866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.514879] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.515206] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.518811] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.518828] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.519244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.519675] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.520115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.520999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.521463] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.521485] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.521889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.522666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.523102] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.523138] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.523499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.524844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.525213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.526070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.526712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.526727] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.527081] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.545139] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.545151] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.545414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.545730] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.546744] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.547214] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.548349] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.551267] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.575702] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.586706] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.587368] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.587572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.588769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.589052] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.589797] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.590379] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.590391] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.590648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.606568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.606578] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.606778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.607047] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.607060] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.607274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.607806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.608062] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.608082] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.608292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.609403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.609601] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.610271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.610779] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.610787] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.610981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.625709] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.625714] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.625833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.626116] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.627044] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.627051] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.627529] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.631336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.655723] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.660422] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.660930] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.661009] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.661630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.661738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.662263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.662731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.662736] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.662841] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.676964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.676969] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.677077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.677210] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.677217] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.677333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.677753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.677884] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.677895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.678025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.678644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.678752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.679519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.680051] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.680056] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.680162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.694275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.694280] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.694387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.694523] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.695443] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.695449] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.695938] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.699642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.724030] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.729857] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.730355] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.730446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.731456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.731574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.731871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.732296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.732301] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.732417] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.746541] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.746546] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.746664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.746810] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.747738] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.747745] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.748234] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.751980] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.776374] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.782717] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.783236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.783342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.783797] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.783977] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.783991] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.784135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.784507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.784642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.785271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.785746] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.785752] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.785884] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.800072] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.800078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.800204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.800360] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.800367] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.800499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.801502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.801627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.801945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.802367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.802372] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.802493] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.817135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.817140] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.817247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.817382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.818299] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.818305] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.818787] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.822338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.846720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.851406] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.851931] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.852010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.852433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.852569] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.852581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.852696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.853325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.853433] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.854227] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.854710] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.854715] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.854819] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.868971] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.868976] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.869084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.869217] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.869223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.869337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.870327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.870435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.870723] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.871138] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.871143] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.871248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.886390] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.886395] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.886500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.886631] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.886637] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.886750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.887193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.887322] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.887330] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.888272] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.891953] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.925031] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.930923] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.931423] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.931525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.931676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.932132] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<6> [92.933287] [IGT] kms_pm_rpm: finished subtest basic-rte, SUCCESS
<7> [92.933326] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [92.933501] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [92.933621] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [92.934158] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.934630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.934840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.935258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.935452] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.935460] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.935646] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.938625] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.938633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.938793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.938996] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.939234] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.939844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.940044] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.940054] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.940257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.941425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.941585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.941940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.942405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.942414] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.942633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.958375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.958384] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.958536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.958721] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.958730] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.958890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.959396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.959659] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.959670] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.960674] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.963999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.065373] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.081422] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [93.082495] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.082646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.082794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.082968] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [93.083422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.083974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.084345] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10
<7> [93.084566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.084688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [93.084999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.085136] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.085142] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.085260] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [93.088105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.088111] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [93.088234] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [93.088241] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [93.088574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.088693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.088996] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.089132] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.089137] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.089254] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.092094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.092099] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.092222] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [93.092229] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [93.092377] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [93.097406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.097590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.097742] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.097891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.098499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.268632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.268761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.269185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<6> [93.269937] [IGT] kms_pm_rpm: exiting, ret=0
<6> [93.271102] Console: switching to colour frame buffer device 128x48
Created at 2023-10-31 09:59:02