igt@i915_selftest@live@workarounds on fi-kbl-guc@linus-v6.6 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-g5e82a8ee4 (x86_64) (Linux: 6.6.0-linus-v6.6-gffc253263a13+ x86_64)
Out	Starting dynamic subtest: workarounds Dynamic subtest workarounds: SUCCESS (0.879s)
Err	Starting dynamic subtest: workarounds Dynamic subtest workarounds: SUCCESS (0.879s)
Dmesg	<6> [138.093590] [IGT] i915_selftest: starting dynamic subtest workarounds <5> [138.213061] Setting dangerous option enable_guc - tainting kernel <5> [138.213070] Setting dangerous option live_selftests - tainting kernel <7> [138.257996] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [138.258199] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [138.258338] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [138.258350] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [138.258484] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [138.258677] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [138.258793] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [138.259419] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [138.259592] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [138.259790] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [138.259969] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [138.259975] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [138.260691] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [138.260718] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [138.260946] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [138.261421] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018 <7> [138.261653] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [138.261852] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [138.262057] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [138.262262] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [138.267576] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [138.267726] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [138.267867] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [138.268021] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [138.268163] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [138.268272] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [138.268377] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [138.268480] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [138.268583] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [138.268685] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [138.268787] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [138.268889] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [138.268999] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [138.269101] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [138.269667] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [138.269826] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [138.269993] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [138.270148] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [138.270302] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [138.270455] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [138.270609] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [138.270765] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [138.270928] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [138.271083] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [138.271238] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [138.271393] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [138.271543] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [138.271691] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [138.271839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [138.272006] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [138.272159] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [138.272312] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [138.272460] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [138.272609] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [138.272757] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [138.272913] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [138.273061] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [138.273210] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [138.273358] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [138.273518] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [138.273710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [138.273877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [138.274037] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [138.274578] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [138.274731] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [138.274904] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [138.275105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.275253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [138.275402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [138.275561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [138.275748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [138.275907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [138.276057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [138.276207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [138.276385] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [138.277294] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [138.277600] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [138.278026] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [138.278168] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [138.278305] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [138.278438] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [138.278571] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [138.278703] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [138.278834] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [138.278976] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [138.279128] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [138.279262] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [138.280671] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [138.281734] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [138.281978] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [138.282113] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [138.282488] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [138.282622] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [138.282859] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] Using AUX CH A (VBT) <7> [138.283027] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E] <7> [138.283297] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [138.283681] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [138.283852] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [138.284073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [138.284221] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [138.284363] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [138.284505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [138.284647] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [138.284787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [138.284945] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [138.285099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [138.285244] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [138.285385] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [138.285532] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [138.285672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [138.285813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A <7> [138.285979] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [138.286139] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [138.286285] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [138.286432] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [138.286614] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [138.286781] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [138.286952] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [138.287097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [138.287231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [138.287366] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [138.287500] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [138.287642] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [138.287779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [138.287978] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [138.288118] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [138.288264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [138.288403] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [138.288540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [138.288677] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [138.288845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [138.289003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [138.289160] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [138.289300] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [138.289440] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [138.289577] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [138.289711] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [138.292151] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [138.292290] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [138.292403] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [138.292522] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [138.292656] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [138.293698] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [138.293841] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [138.293996] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [138.296543] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [138.296717] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [138.296878] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [138.324107] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [138.324277] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [138.324413] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [138.324547] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [138.324679] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [138.324812] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004 <7> [138.324994] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [138.325167] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [138.325300] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [138.325432] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [138.325565] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [138.325697] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [138.325830] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [138.325973] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [138.326126] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [138.327290] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [138.327294] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [138.333039] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [138.333470] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [138.333628] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [138.333631] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [138.341562] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [138.341693] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [138.341806] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [138.341931] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [138.342431] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [138.342815] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [138.343032] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [138.343243] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [138.343441] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [138.343670] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [138.346889] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [138.347254] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [138.347613] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1 <7> [138.348555] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <6> [138.348631] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [138.351110] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [138.367680] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [138.368601] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input50 <7> [138.369377] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [138.370186] [drm:drm_client_modeset_probe] <7> [138.370224] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [138.370159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [138.370232] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [138.370381] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [138.370394] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [138.370400] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [138.370405] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [138.370396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [138.370574] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [138.370586] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [138.370593] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [138.370606] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [138.370604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [138.370800] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [138.370868] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [138.370875] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [138.370893] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [138.370810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [138.370912] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [138.370917] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [138.370956] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [138.370968] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [138.370989] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [138.370996] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [138.371496] [drm:drm_client_modeset_probe] <7> [138.371531] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [138.371538] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [138.371549] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [138.371677] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [138.371682] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [138.371686] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [138.371763] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [138.371767] i915 device info: graphics version: 9 <7> [138.371769] i915 device info: media version: 9 <7> [138.371772] i915 device info: graphics stepping: F0 <7> [138.371774] i915 device info: media stepping: F0 <7> [138.371777] i915 device info: display stepping: C0 <7> [138.371779] i915 device info: base die stepping: ** <7> [138.371781] i915 device info: gt: 2 <7> [138.371783] i915 device info: memory-regions: 0x21 <7> [138.371786] i915 device info: page-sizes: 0x11000 <7> [138.371788] i915 device info: platform: KABYLAKE <7> [138.371790] i915 device info: ppgtt-size: 48 <7> [138.371792] i915 device info: ppgtt-type: 2 <7> [138.371794] i915 device info: dma_mask_size: 39 <7> [138.371797] i915 device info: is_mobile: no <7> [138.371799] i915 device info: is_lp: no <7> [138.371802] i915 device info: require_force_probe: no <7> [138.371804] i915 device info: is_dgfx: no <7> [138.371806] i915 device info: has_64bit_reloc: yes <7> [138.371809] i915 device info: has_64k_pages: no <7> [138.371811] i915 device info: gpu_reset_clobbers_display: no <7> [138.371818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [138.371822] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [138.371825] i915 device info: has_reset_engine: yes <7> [138.371828] i915 device info: has_3d_pipeline: yes <7> [138.371831] i915 device info: has_4tile: no <7> [138.371833] i915 device info: has_flat_ccs: no <7> [138.371836] i915 device info: has_global_mocs: no <7> [138.371839] i915 device info: has_gmd_id: no <7> [138.371842] i915 device info: has_gt_uc: yes <7> [138.371844] i915 device info: has_heci_pxp: no <7> [138.371847] i915 device info: has_heci_gscfi: no <7> [138.371850] i915 device info: has_guc_deprivilege: no <7> [138.371852] i915 device info: has_l3_ccs_read: no <7> [138.371855] i915 device info: has_l3_dpf: no <7> [138.371858] i915 device info: has_llc: yes <7> [138.371861] i915 device info: has_logical_ring_contexts: yes <7> [138.371863] i915 device info: has_logical_ring_elsq: no <7> [138.371866] i915 device info: has_media_ratio_mode: no <7> [138.371869] i915 device info: has_mslice_steering: no <7> [138.371872] i915 device info: has_oa_bpc_reporting: no <7> [138.371875] i915 device info: has_oa_slice_contrib_limits: no <7> [138.371877] i915 device info: has_oam: no <7> [138.371880] i915 device info: has_one_eu_per_fuse_bit: no <7> [138.371883] i915 device info: has_pxp: no <7> [138.371886] i915 device info: has_rc6: yes <7> [138.371888] i915 device info: has_rc6p: no <7> [138.371826] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [138.371891] i915 device info: has_rps: yes <7> [138.371894] i915 device info: has_runtime_pm: yes <7> [138.371905] i915 device info: has_snoop: no <7> [138.371908] i915 device info: has_coherent_ggtt: yes <7> [138.371910] i915 device info: tuning_thread_rr_after_dep: no <7> [138.371912] i915 device info: unfenced_needs_alignment: no <7> [138.371915] i915 device info: hws_needs_physical: no <7> [138.371917] i915 device info: has_pooled_eu: no <7> [138.371919] i915 device info: rawclk rate: 24000 kHz <7> [138.371922] i915 device info: display version: 9 <7> [138.371924] i915 device info: cursor_needs_physical: no <7> [138.371927] i915 device info: has_cdclk_crawl: no <7> [138.371929] i915 device info: has_cdclk_squash: no <7> [138.371931] i915 device info: has_ddi: yes <7> [138.371933] i915 device info: has_dp_mst: yes <7> [138.371936] i915 device info: has_dsb: no <7> [138.371938] i915 device info: has_fpga_dbg: yes <7> [138.371940] i915 device info: has_gmch: no <7> [138.371943] i915 device info: has_hotplug: yes <7> [138.371945] i915 device info: has_hti: no <7> [138.371947] i915 device info: has_ipc: yes <7> [138.371950] i915 device info: has_overlay: no <7> [138.371952] i915 device info: has_psr: yes <7> [138.371954] i915 device info: has_psr_hw_tracking: yes <7> [138.371956] i915 device info: overlay_needs_physical: no <7> [138.371959] i915 device info: supports_tv: no <7> [138.371961] i915 device info: has_hdcp: yes <7> [138.371963] i915 device info: has_dmc: yes <7> [138.371966] i915 device info: has_dsc: no <7> [138.371968] i915 device info: iommu: enabled <7> [138.371970] i915 device info: available engines: 40403 <7> [138.371973] i915 device info: slice total: 1, mask=0001 <7> [138.371976] i915 device info: subslice total: 3 <7> [138.371978] i915 device info: slice0: 3 subslices, mask=00000007 <7> [138.371996] i915 device info: slice1: 0 subslices, mask=00000000 <7> [138.371999] i915 device info: slice2: 0 subslices, mask=00000000 <7> [138.372002] i915 device info: EU total: 24 <7> [138.372005] i915 device info: EU per subslice: 8 <7> [138.372007] i915 device info: has slice power gating: no <7> [138.372010] i915 device info: has subslice power gating: no <7> [138.372013] i915 device info: has EU power gating: yes <6> [138.372016] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [138.372019] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [138.372022] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [138.372026] i915: Performing live selftests with st_random_seed=0x23b20652 st_timeout=500 <6> [138.372030] i915: Running workarounds <6> [138.372052] i915: Running intel_workarounds_live_selftests/live_dirty_whitelist <7> [138.372051] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [138.372057] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [138.372062] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [138.372067] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [138.372071] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [138.372111] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [138.372122] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [138.372142] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [138.372151] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [138.403913] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <6> [138.409962] i915: Running intel_workarounds_live_selftests/live_reset_whitelist <6> [138.409968] Checking 5 whitelisted registers on rcs0 (RING_NONPRIV) [engine] <5> [138.413227] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds <6> [138.414698] Checking 5 whitelisted registers on rcs0 (RING_NONPRIV) [device] <7> [138.415920] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <5> [138.417600] i915 0000:00:02.0: [drm] Resetting chip for live_workarounds <6> [138.418235] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [138.418240] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [138.420893] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [138.421416] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [138.421633] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [138.421636] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [138.426907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.437907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <6> [138.443972] i915: Running intel_workarounds_live_selftests/live_isolated_whitelist <7> [138.449910] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.460984] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.471907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <6> [138.475136] i915: Running intel_workarounds_live_selftests/live_gpu_reset_workarounds <6> [138.475147] Verifying after GPU reset... <7> [138.475155] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [138.475330] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT_REF workarounds on global <7> [138.475492] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 REF workarounds on rcs0 <7> [138.475652] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 CTX_REF workarounds on rcs0 <5> [138.477246] i915 0000:00:02.0: [drm] Resetting chip for live_workarounds <6> [138.477416] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [138.477419] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [138.480293] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 883MHz, before = 883MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [138.480561] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [138.480738] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [138.480741] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [138.483690] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.493909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.494921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [138.504910] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.515907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <6> [138.516933] i915: Running intel_workarounds_live_selftests/live_engine_reset_workarounds <7> [138.516950] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [138.517119] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT_REF workarounds on global <7> [138.517282] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 REF workarounds on rcs0 <7> [138.517442] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 CTX_REF workarounds on rcs0 <6> [138.517584] Verifying after rcs0 reset... <5> [138.519206] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds:idle <5> [138.521909] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds:active <6> [138.522973] Verifying after bcs0 reset... <5> [138.526002] i915 0000:00:02.0: [drm] Resetting bcs0 for live_workarounds:active <6> [138.526991] Verifying after vcs0 reset... <7> [138.526911] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <5> [138.530180] i915 0000:00:02.0: [drm] Resetting vcs0 for live_workarounds:active <6> [138.531280] Verifying after vecs0 reset... <5> [138.534107] i915 0000:00:02.0: [drm] Resetting vecs0 for live_workarounds:active <7> [138.538986] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.549909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.561116] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.564941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [138.565180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [138.565347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [138.565512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [138.565678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [138.571911] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.582915] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.591143] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [138.594554] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.604909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.615908] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.626907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.637916] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.648909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.659907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.670907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.681907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.692908] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.703907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.714907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.725907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.736909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.747907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [138.748085] [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI E/PHY E: Too many retries, giving up. First error: -110 <7> [138.760259] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [138.804384] i915: probe of 0000:00:02.0 failed with error -25 <6> [138.972855] [IGT] i915_selftest: finished subtest workarounds, SUCCESS

<6> [138.093590] [IGT] i915_selftest: starting dynamic subtest workarounds

<5> [138.213061] Setting dangerous option enable_guc - tainting kernel

<5> [138.213070] Setting dangerous option live_selftests - tainting kernel

<7> [138.257996] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [138.258199] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [138.258338] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [138.258350] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [138.258484] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [138.258677] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [138.258793] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [138.259419] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [138.259592] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [138.259790] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [138.259969] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [138.259975] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [138.260691] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [138.260718] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [138.260946] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [138.261421] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018

<7> [138.261653] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [138.261852] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [138.262057] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [138.262262] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [138.267576] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [138.267726] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [138.267867] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [138.268021] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [138.268163] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [138.268272] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [138.268377] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [138.268480] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [138.268583] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [138.268685] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [138.268787] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [138.268889] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [138.268999] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [138.269101] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [138.269667] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [138.269826] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [138.269993] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [138.270148] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [138.270302] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [138.270455] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [138.270609] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [138.270765] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [138.270928] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [138.271083] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [138.271238] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [138.271393] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [138.271543] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [138.271691] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [138.271839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [138.272006] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [138.272159] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [138.272312] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [138.272460] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [138.272609] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [138.272757] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [138.272913] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [138.273061] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [138.273210] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [138.273358] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [138.273518] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [138.273710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [138.273877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [138.274037] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [138.274578] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [138.274731] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [138.274904] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [138.275105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.275253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [138.275402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [138.275561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [138.275748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [138.275907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [138.276057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [138.276207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [138.276385] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [138.277294] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [138.277600] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [138.278026] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [138.278168] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [138.278305] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [138.278438] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [138.278571] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [138.278703] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [138.278834] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [138.278976] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [138.279128] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [138.279262] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [138.280671] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [138.281734] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [138.281978] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [138.282113] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [138.282488] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [138.282622] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [138.282859] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] Using AUX CH A (VBT)

<7> [138.283027] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E]

<7> [138.283297] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [138.283681] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [138.283852] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [138.284073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [138.284221] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [138.284363] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [138.284505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [138.284647] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [138.284787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [138.284945] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [138.285099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [138.285244] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [138.285385] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [138.285532] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [138.285672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [138.285813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [138.285979] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [138.286139] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [138.286285] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [138.286432] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [138.286614] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [138.286781] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [138.286952] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [138.287097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [138.287231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [138.287366] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [138.287500] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [138.287642] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [138.287779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [138.287978] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [138.288118] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [138.288264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [138.288403] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [138.288540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [138.288677] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [138.288845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [138.289003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [138.289160] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [138.289300] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [138.289440] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [138.289577] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [138.289711] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [138.292151] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [138.292290] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [138.292403] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [138.292522] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [138.292656] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [138.293698] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [138.293841] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [138.293996] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [138.296543] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [138.296717] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [138.296878] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [138.324107] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [138.324277] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [138.324413] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [138.324547] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [138.324679] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [138.324812] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004

<7> [138.324994] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [138.325167] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [138.325300] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [138.325432] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [138.325565] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [138.325697] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [138.325830] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [138.325973] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [138.326126] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [138.327290] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [138.327294] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [138.333039] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [138.333470] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [138.333628] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [138.333631] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [138.341562] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [138.341693] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [138.341806] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [138.341931] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [138.342431] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [138.342815] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [138.343032] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [138.343243] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [138.343441] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [138.343670] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [138.346889] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [138.347254] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [138.347613] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1

<7> [138.348555] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<6> [138.348631] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [138.351110] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [138.367680] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [138.368601] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input50

<7> [138.369377] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [138.370186] [drm:drm_client_modeset_probe]

<7> [138.370224] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [138.370159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [138.370232] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [138.370381] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [138.370394] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [138.370400] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [138.370405] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [138.370396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [138.370574] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [138.370586] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [138.370593] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [138.370606] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [138.370604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [138.370800] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [138.370868] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [138.370875] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [138.370893] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [138.370810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [138.370912] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [138.370917] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [138.370956] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [138.370968] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [138.370989] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [138.370996] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [138.371496] [drm:drm_client_modeset_probe]

<7> [138.371531] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [138.371538] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [138.371549] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [138.371677] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [138.371682] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [138.371686] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [138.371763] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [138.371767] i915 device info: graphics version: 9

<7> [138.371769] i915 device info: media version: 9

<7> [138.371772] i915 device info: graphics stepping: F0

<7> [138.371774] i915 device info: media stepping: F0

<7> [138.371777] i915 device info: display stepping: C0

<7> [138.371779] i915 device info: base die stepping: **

<7> [138.371781] i915 device info: gt: 2

<7> [138.371783] i915 device info: memory-regions: 0x21

<7> [138.371786] i915 device info: page-sizes: 0x11000

<7> [138.371788] i915 device info: platform: KABYLAKE

<7> [138.371790] i915 device info: ppgtt-size: 48

<7> [138.371792] i915 device info: ppgtt-type: 2

<7> [138.371794] i915 device info: dma_mask_size: 39

<7> [138.371797] i915 device info: is_mobile: no

<7> [138.371799] i915 device info: is_lp: no

<7> [138.371802] i915 device info: require_force_probe: no

<7> [138.371804] i915 device info: is_dgfx: no

<7> [138.371806] i915 device info: has_64bit_reloc: yes

<7> [138.371809] i915 device info: has_64k_pages: no

<7> [138.371811] i915 device info: gpu_reset_clobbers_display: no

<7> [138.371818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [138.371822] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [138.371825] i915 device info: has_reset_engine: yes

<7> [138.371828] i915 device info: has_3d_pipeline: yes

<7> [138.371831] i915 device info: has_4tile: no

<7> [138.371833] i915 device info: has_flat_ccs: no

<7> [138.371836] i915 device info: has_global_mocs: no

<7> [138.371839] i915 device info: has_gmd_id: no

<7> [138.371842] i915 device info: has_gt_uc: yes

<7> [138.371844] i915 device info: has_heci_pxp: no

<7> [138.371847] i915 device info: has_heci_gscfi: no

<7> [138.371850] i915 device info: has_guc_deprivilege: no

<7> [138.371852] i915 device info: has_l3_ccs_read: no

<7> [138.371855] i915 device info: has_l3_dpf: no

<7> [138.371858] i915 device info: has_llc: yes

<7> [138.371861] i915 device info: has_logical_ring_contexts: yes

<7> [138.371863] i915 device info: has_logical_ring_elsq: no

<7> [138.371866] i915 device info: has_media_ratio_mode: no

<7> [138.371869] i915 device info: has_mslice_steering: no

<7> [138.371872] i915 device info: has_oa_bpc_reporting: no

<7> [138.371875] i915 device info: has_oa_slice_contrib_limits: no

<7> [138.371877] i915 device info: has_oam: no

<7> [138.371880] i915 device info: has_one_eu_per_fuse_bit: no

<7> [138.371883] i915 device info: has_pxp: no

<7> [138.371886] i915 device info: has_rc6: yes

<7> [138.371888] i915 device info: has_rc6p: no

<7> [138.371826] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [138.371891] i915 device info: has_rps: yes

<7> [138.371894] i915 device info: has_runtime_pm: yes

<7> [138.371905] i915 device info: has_snoop: no

<7> [138.371908] i915 device info: has_coherent_ggtt: yes

<7> [138.371910] i915 device info: tuning_thread_rr_after_dep: no

<7> [138.371912] i915 device info: unfenced_needs_alignment: no

<7> [138.371915] i915 device info: hws_needs_physical: no

<7> [138.371917] i915 device info: has_pooled_eu: no

<7> [138.371919] i915 device info: rawclk rate: 24000 kHz

<7> [138.371922] i915 device info: display version: 9

<7> [138.371924] i915 device info: cursor_needs_physical: no

<7> [138.371927] i915 device info: has_cdclk_crawl: no

<7> [138.371929] i915 device info: has_cdclk_squash: no

<7> [138.371931] i915 device info: has_ddi: yes

<7> [138.371933] i915 device info: has_dp_mst: yes

<7> [138.371936] i915 device info: has_dsb: no

<7> [138.371938] i915 device info: has_fpga_dbg: yes

<7> [138.371940] i915 device info: has_gmch: no

<7> [138.371943] i915 device info: has_hotplug: yes

<7> [138.371945] i915 device info: has_hti: no

<7> [138.371947] i915 device info: has_ipc: yes

<7> [138.371950] i915 device info: has_overlay: no

<7> [138.371952] i915 device info: has_psr: yes

<7> [138.371954] i915 device info: has_psr_hw_tracking: yes

<7> [138.371956] i915 device info: overlay_needs_physical: no

<7> [138.371959] i915 device info: supports_tv: no

<7> [138.371961] i915 device info: has_hdcp: yes

<7> [138.371963] i915 device info: has_dmc: yes

<7> [138.371966] i915 device info: has_dsc: no

<7> [138.371968] i915 device info: iommu: enabled

<7> [138.371970] i915 device info: available engines: 40403

<7> [138.371973] i915 device info: slice total: 1, mask=0001

<7> [138.371976] i915 device info: subslice total: 3

<7> [138.371978] i915 device info: slice0: 3 subslices, mask=00000007

<7> [138.371996] i915 device info: slice1: 0 subslices, mask=00000000

<7> [138.371999] i915 device info: slice2: 0 subslices, mask=00000000

<7> [138.372002] i915 device info: EU total: 24

<7> [138.372005] i915 device info: EU per subslice: 8

<7> [138.372007] i915 device info: has slice power gating: no

<7> [138.372010] i915 device info: has subslice power gating: no

<7> [138.372013] i915 device info: has EU power gating: yes

<6> [138.372016] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [138.372019] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [138.372022] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [138.372026] i915: Performing live selftests with st_random_seed=0x23b20652 st_timeout=500

<6> [138.372030] i915: Running workarounds

<6> [138.372052] i915: Running intel_workarounds_live_selftests/live_dirty_whitelist

<7> [138.372051] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [138.372057] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [138.372062] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [138.372067] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [138.372071] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [138.372111] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [138.372122] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [138.372142] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [138.372151] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [138.403913] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<6> [138.409962] i915: Running intel_workarounds_live_selftests/live_reset_whitelist

<6> [138.409968] Checking 5 whitelisted registers on rcs0 (RING_NONPRIV) [engine]

<5> [138.413227] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds

<6> [138.414698] Checking 5 whitelisted registers on rcs0 (RING_NONPRIV) [device]

<7> [138.415920] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<5> [138.417600] i915 0000:00:02.0: [drm] Resetting chip for live_workarounds

<6> [138.418235] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [138.418240] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [138.420893] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [138.421416] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [138.421633] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [138.421636] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [138.426907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.437907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<6> [138.443972] i915: Running intel_workarounds_live_selftests/live_isolated_whitelist

<7> [138.449910] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.460984] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.471907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<6> [138.475136] i915: Running intel_workarounds_live_selftests/live_gpu_reset_workarounds

<6> [138.475147] Verifying after GPU reset...

<7> [138.475155] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [138.475330] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT_REF workarounds on global

<7> [138.475492] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 REF workarounds on rcs0

<7> [138.475652] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 CTX_REF workarounds on rcs0

<5> [138.477246] i915 0000:00:02.0: [drm] Resetting chip for live_workarounds

<6> [138.477416] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [138.477419] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [138.480293] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 883MHz, before = 883MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [138.480561] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [138.480738] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [138.480741] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [138.483690] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.493909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.494921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [138.504910] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.515907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<6> [138.516933] i915: Running intel_workarounds_live_selftests/live_engine_reset_workarounds

<7> [138.516950] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [138.517119] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT_REF workarounds on global

<7> [138.517282] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 REF workarounds on rcs0

<7> [138.517442] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 CTX_REF workarounds on rcs0

<6> [138.517584] Verifying after rcs0 reset...

<5> [138.519206] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds:idle

<5> [138.521909] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds:active

<6> [138.522973] Verifying after bcs0 reset...

<5> [138.526002] i915 0000:00:02.0: [drm] Resetting bcs0 for live_workarounds:active

<6> [138.526991] Verifying after vcs0 reset...

<7> [138.526911] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<5> [138.530180] i915 0000:00:02.0: [drm] Resetting vcs0 for live_workarounds:active

<6> [138.531280] Verifying after vecs0 reset...

<5> [138.534107] i915 0000:00:02.0: [drm] Resetting vecs0 for live_workarounds:active

<7> [138.538986] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.549909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.561116] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.564941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [138.565180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [138.565347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [138.565512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [138.565678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [138.571911] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.582915] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.591143] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [138.594554] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.604909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.615908] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.626907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.637916] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.648909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.659907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.670907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.681907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.692908] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.703907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.714907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.725907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.736909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.747907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [138.748085] [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI E/PHY E: Too many retries, giving up. First error: -110

<7> [138.760259] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [138.804384] i915: probe of 0000:00:02.0 failed with error -25

<6> [138.972855] [IGT] i915_selftest: finished subtest workarounds, SUCCESS

Results for igt@i915_selftest@live@workarounds