igt@i915_selftest@live@gt_mocs on fi-kbl-guc@linus-v6.6 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-g5e82a8ee4 (x86_64) (Linux: 6.6.0-linus-v6.6-gffc253263a13+ x86_64)
Out	Starting dynamic subtest: gt_mocs Dynamic subtest gt_mocs: SUCCESS (0.869s)
Err	Starting dynamic subtest: gt_mocs Dynamic subtest gt_mocs: SUCCESS (0.869s)
Dmesg	<6> [151.882154] [IGT] i915_selftest: starting dynamic subtest gt_mocs <5> [151.990872] Setting dangerous option enable_guc - tainting kernel <5> [151.990880] Setting dangerous option live_selftests - tainting kernel <7> [152.035563] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [152.035796] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [152.035979] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [152.035991] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [152.036167] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [152.036367] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [152.036487] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [152.037086] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [152.037201] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [152.037310] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [152.037417] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [152.037422] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [152.037960] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [152.037986] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [152.038137] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [152.038462] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018 <7> [152.038662] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [152.038811] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [152.038954] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [152.039116] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [152.042935] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [152.043098] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [152.043237] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [152.043374] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [152.043511] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [152.043618] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [152.043722] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [152.043824] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [152.043972] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [152.044097] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [152.044200] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [152.044302] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [152.044404] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [152.044506] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [152.044989] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [152.045136] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [152.045283] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [152.045430] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [152.045574] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [152.045718] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [152.045862] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [152.046032] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [152.046201] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [152.046347] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [152.046491] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [152.046637] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [152.046779] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [152.046929] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [152.047096] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [152.047241] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [152.047384] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [152.047526] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [152.047665] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [152.047804] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [152.047951] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [152.048120] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [152.048259] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [152.048399] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [152.048538] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [152.048689] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [152.048869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [152.049043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [152.049215] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [152.049812] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [152.049967] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [152.050145] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [152.050339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.050480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [152.050620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [152.050770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [152.050966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [152.051134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [152.051276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [152.051419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [152.051592] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [152.052194] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [152.052672] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [152.052627] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [152.052784] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [152.052950] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [152.053088] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [152.053221] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [152.053359] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [152.053524] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [152.053681] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [152.053822] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [152.053972] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [152.055705] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [152.057244] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [152.057548] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [152.057739] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [152.058114] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [152.058246] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [152.058465] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] Using AUX CH A (VBT) <7> [152.058607] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E] <7> [152.058852] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [152.059241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [152.059408] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [152.059571] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [152.059714] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [152.059856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [152.060013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [152.060158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [152.060300] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [152.060441] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [152.060583] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [152.060724] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [152.060865] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [152.061021] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [152.061163] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [152.061305] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A <7> [152.061452] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [152.061601] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [152.061746] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [152.061948] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [152.062156] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [152.062315] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [152.062463] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [152.062600] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [152.062768] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [152.062945] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [152.063084] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [152.063227] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [152.063385] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [152.063551] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [152.063696] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [152.063838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [152.064021] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [152.064210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [152.064346] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [152.064512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [152.064657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [152.064797] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [152.064968] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [152.065132] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [152.065283] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [152.065422] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [152.067921] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [152.068061] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [152.068175] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [152.068293] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [152.068428] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [152.069480] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [152.069639] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [152.069779] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [152.072595] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [152.072772] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [152.072944] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [152.100084] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [152.100253] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [152.100388] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [152.100521] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [152.100654] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [152.100787] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004 <7> [152.100932] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [152.101068] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [152.101204] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [152.101335] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [152.101468] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [152.101629] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [152.101785] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [152.101958] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [152.102093] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [152.103247] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [152.103251] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [152.110079] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [152.110727] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [152.110884] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [152.110887] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [152.118584] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [152.118705] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [152.118808] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [152.118926] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [152.119284] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [152.119497] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [152.119640] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [152.119780] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [152.119925] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [152.120080] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [152.124426] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [152.124834] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [152.125232] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1 <7> [152.125951] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <6> [152.126023] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [152.128026] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [152.143387] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [152.144450] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input55 <7> [152.145408] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [152.146186] [drm:drm_client_modeset_probe] <7> [152.146237] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [152.146185] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [152.146247] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [152.146487] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [152.146505] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [152.146415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [152.146514] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [152.146521] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [152.146622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [152.146763] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [152.146776] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [152.146782] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [152.146789] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [152.146831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [152.147147] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [152.147181] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [152.147195] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [152.147201] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [152.147206] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [152.147211] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [152.147256] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [152.147268] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [152.147291] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [152.147302] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [152.147584] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [152.147796] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [152.147801] i915 device info: graphics version: 9 <7> [152.147804] i915 device info: media version: 9 <7> [152.147807] i915 device info: graphics stepping: F0 <7> [152.147810] i915 device info: media stepping: F0 <7> [152.147813] i915 device info: display stepping: C0 <7> [152.147815] i915 device info: base die stepping: ** <7> [152.147818] i915 device info: gt: 2 <7> [152.147821] i915 device info: memory-regions: 0x21 <7> [152.147823] i915 device info: page-sizes: 0x11000 <7> [152.147826] i915 device info: platform: KABYLAKE <7> [152.147829] i915 device info: ppgtt-size: 48 <7> [152.147832] i915 device info: ppgtt-type: 2 <7> [152.147835] i915 device info: dma_mask_size: 39 <7> [152.147837] i915 device info: is_mobile: no <7> [152.147840] i915 device info: is_lp: no <7> [152.147843] i915 device info: require_force_probe: no <7> [152.147846] i915 device info: is_dgfx: no <7> [152.147848] i915 device info: has_64bit_reloc: yes <7> [152.147851] i915 device info: has_64k_pages: no <7> [152.147854] i915 device info: gpu_reset_clobbers_display: no <7> [152.147857] i915 device info: has_reset_engine: yes <7> [152.147860] i915 device info: has_3d_pipeline: yes <7> [152.147862] i915 device info: has_4tile: no <7> [152.147865] i915 device info: has_flat_ccs: no <7> [152.147868] i915 device info: has_global_mocs: no <7> [152.147871] i915 device info: has_gmd_id: no <7> [152.147873] i915 device info: has_gt_uc: yes <7> [152.147876] i915 device info: has_heci_pxp: no <7> [152.147879] i915 device info: has_heci_gscfi: no <7> [152.147881] i915 device info: has_guc_deprivilege: no <7> [152.147884] i915 device info: has_l3_ccs_read: no <7> [152.147887] i915 device info: has_l3_dpf: no <7> [152.147889] i915 device info: has_llc: yes <7> [152.147892] i915 device info: has_logical_ring_contexts: yes <7> [152.147907] i915 device info: has_logical_ring_elsq: no <7> [152.147910] i915 device info: has_media_ratio_mode: no <7> [152.147913] i915 device info: has_mslice_steering: no <7> [152.147915] i915 device info: has_oa_bpc_reporting: no <7> [152.147918] i915 device info: has_oa_slice_contrib_limits: no <7> [152.147921] i915 device info: has_oam: no <7> [152.147924] i915 device info: has_one_eu_per_fuse_bit: no <7> [152.147926] i915 device info: has_pxp: no <7> [152.147929] i915 device info: has_rc6: yes <7> [152.147932] i915 device info: has_rc6p: no <7> [152.147934] i915 device info: has_rps: yes <7> [152.147937] i915 device info: has_runtime_pm: yes <7> [152.147940] i915 device info: has_snoop: no <7> [152.147943] i915 device info: has_coherent_ggtt: yes <7> [152.147945] i915 device info: tuning_thread_rr_after_dep: no <7> [152.147948] i915 device info: unfenced_needs_alignment: no <7> [152.147951] i915 device info: hws_needs_physical: no <7> [152.147953] i915 device info: has_pooled_eu: no <7> [152.147956] i915 device info: rawclk rate: 24000 kHz <7> [152.147959] i915 device info: display version: 9 <7> [152.147962] i915 device info: cursor_needs_physical: no <7> [152.147964] i915 device info: has_cdclk_crawl: no <7> [152.147967] i915 device info: has_cdclk_squash: no <7> [152.147970] i915 device info: has_ddi: yes <7> [152.147972] i915 device info: has_dp_mst: yes <7> [152.147975] i915 device info: has_dsb: no <7> [152.147978] i915 device info: has_fpga_dbg: yes <7> [152.147981] i915 device info: has_gmch: no <7> [152.147983] i915 device info: has_hotplug: yes <7> [152.147986] i915 device info: has_hti: no <7> [152.147988] i915 device info: has_ipc: yes <7> [152.147991] i915 device info: has_overlay: no <7> [152.147994] i915 device info: has_psr: yes <7> [152.147997] i915 device info: has_psr_hw_tracking: yes <7> [152.147999] i915 device info: overlay_needs_physical: no <7> [152.148002] i915 device info: supports_tv: no <7> [152.148005] i915 device info: has_hdcp: yes <7> [152.148008] i915 device info: has_dmc: yes <7> [152.148010] i915 device info: has_dsc: no <7> [152.148013] i915 device info: iommu: enabled <7> [152.148016] i915 device info: available engines: 40403 <7> [152.148019] i915 device info: slice total: 1, mask=0001 <7> [152.148022] i915 device info: subslice total: 3 <7> [152.148025] i915 device info: slice0: 3 subslices, mask=00000007 <7> [152.148028] i915 device info: slice1: 0 subslices, mask=00000000 <7> [152.148031] i915 device info: slice2: 0 subslices, mask=00000000 <7> [152.148034] i915 device info: EU total: 24 <7> [152.148037] i915 device info: EU per subslice: 8 <7> [152.148039] i915 device info: has slice power gating: no <7> [152.148042] i915 device info: has subslice power gating: no <7> [152.148045] i915 device info: has EU power gating: yes <6> [152.148047] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [152.148050] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [152.148053] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [152.148058] i915: Performing live selftests with st_random_seed=0xcd4bae46 st_timeout=500 <6> [152.148061] i915: Running gt_mocs <6> [152.148088] i915: Running intel_mocs_live_selftests/live_mocs_kernel <7> [152.148485] [drm:drm_client_modeset_probe] <7> [152.148532] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [152.148542] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [152.148752] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [152.148760] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [152.148768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [152.148974] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [152.148982] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [152.148990] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [152.149195] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [152.149202] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [152.149209] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [152.149214] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [152.149219] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [152.149238] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [152.149250] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [152.149273] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [152.149283] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [152.149358] [drm:drm_client_modeset_probe] <7> [152.149401] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [152.149409] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [152.149611] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [152.149618] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [152.149626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [152.149824] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [152.149831] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [152.149838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [152.150060] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [152.150068] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [152.150073] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [152.150078] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [152.150083] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [152.150122] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [152.150134] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [152.150157] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [152.150167] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [152.162086] i915: Running intel_mocs_live_selftests/live_mocs_clean <7> [152.183907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <6> [152.191142] i915: Running intel_mocs_live_selftests/live_mocs_reset <5> [152.191488] i915 0000:00:02.0: [drm] Resetting rcs0 for mocs <5> [152.194208] i915 0000:00:02.0: [drm] Resetting rcs0 for mocs <5> [152.194695] i915 0000:00:02.0: [drm] Resetting chip for mocs <7> [152.194912] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <6> [152.195616] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [152.195622] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [152.197690] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [152.198607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [152.198792] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [152.198795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <5> [152.199443] i915 0000:00:02.0: [drm] Resetting bcs0 for mocs <5> [152.200820] i915 0000:00:02.0: [drm] Resetting bcs0 for mocs <5> [152.201127] i915 0000:00:02.0: [drm] Resetting chip for mocs <6> [152.201309] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [152.201313] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [152.203754] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [152.204036] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [152.204216] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [152.204219] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <5> [152.205269] i915 0000:00:02.0: [drm] Resetting vcs0 for mocs <5> [152.206578] i915 0000:00:02.0: [drm] Resetting vcs0 for mocs <5> [152.206776] i915 0000:00:02.0: [drm] Resetting chip for mocs <6> [152.206976] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [152.206980] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [152.207767] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.209368] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [152.209619] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [152.209792] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [152.209795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <5> [152.210293] i915 0000:00:02.0: [drm] Resetting vecs0 for mocs <5> [152.211735] i915 0000:00:02.0: [drm] Resetting vecs0 for mocs <5> [152.212090] i915 0000:00:02.0: [drm] Resetting chip for mocs <6> [152.212275] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [152.212279] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [152.214566] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [152.214819] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [152.215007] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [152.215010] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [152.218907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.229908] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.240911] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.244925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [152.245101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [152.245268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [152.245434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [152.251908] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.262907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.268092] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [152.274908] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.285911] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.296912] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.308015] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.318907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.329906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.340906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.351909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.362906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.373906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.384910] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.395909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.406906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.417906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.428907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.439909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.450906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.461906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.472908] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.483909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.494906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.505906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.516906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.527909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f) <7> [152.528083] [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI E/PHY E: Too many retries, giving up. First error: -110 <7> [152.539164] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [152.582437] i915: probe of 0000:00:02.0 failed with error -25 <6> [152.752016] [IGT] i915_selftest: finished subtest gt_mocs, SUCCESS

<6> [151.882154] [IGT] i915_selftest: starting dynamic subtest gt_mocs

<5> [151.990872] Setting dangerous option enable_guc - tainting kernel

<5> [151.990880] Setting dangerous option live_selftests - tainting kernel

<7> [152.035563] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [152.035796] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [152.035979] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [152.035991] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [152.036167] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [152.036367] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [152.036487] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [152.037086] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [152.037201] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [152.037310] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [152.037417] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [152.037422] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [152.037960] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [152.037986] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [152.038137] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [152.038462] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018

<7> [152.038662] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [152.038811] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [152.038954] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [152.039116] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [152.042935] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [152.043098] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [152.043237] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [152.043374] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [152.043511] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [152.043618] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [152.043722] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [152.043824] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [152.043972] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [152.044097] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [152.044200] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [152.044302] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [152.044404] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [152.044506] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [152.044989] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [152.045136] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [152.045283] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [152.045430] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [152.045574] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [152.045718] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [152.045862] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [152.046032] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [152.046201] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [152.046347] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [152.046491] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [152.046637] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [152.046779] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [152.046929] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [152.047096] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [152.047241] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [152.047384] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [152.047526] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [152.047665] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [152.047804] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [152.047951] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [152.048120] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [152.048259] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [152.048399] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [152.048538] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [152.048689] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [152.048869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [152.049043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [152.049215] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [152.049812] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [152.049967] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [152.050145] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [152.050339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.050480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [152.050620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [152.050770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [152.050966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [152.051134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [152.051276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [152.051419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [152.051592] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [152.052194] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [152.052672] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [152.052627] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [152.052784] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [152.052950] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [152.053088] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [152.053221] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [152.053359] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [152.053524] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [152.053681] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [152.053822] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [152.053972] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [152.055705] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [152.057244] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [152.057548] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [152.057739] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [152.058114] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [152.058246] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [152.058465] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] Using AUX CH A (VBT)

<7> [152.058607] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E]

<7> [152.058852] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [152.059241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [152.059408] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [152.059571] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [152.059714] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [152.059856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [152.060013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [152.060158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [152.060300] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [152.060441] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [152.060583] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [152.060724] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [152.060865] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [152.061021] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [152.061163] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [152.061305] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [152.061452] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [152.061601] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [152.061746] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [152.061948] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [152.062156] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [152.062315] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [152.062463] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [152.062600] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [152.062768] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [152.062945] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [152.063084] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [152.063227] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [152.063385] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [152.063551] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [152.063696] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [152.063838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [152.064021] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [152.064210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [152.064346] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [152.064512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [152.064657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [152.064797] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [152.064968] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [152.065132] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [152.065283] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [152.065422] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [152.067921] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [152.068061] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [152.068175] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [152.068293] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [152.068428] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [152.069480] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [152.069639] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [152.069779] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [152.072595] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [152.072772] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [152.072944] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [152.100084] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [152.100253] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [152.100388] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [152.100521] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [152.100654] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [152.100787] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004

<7> [152.100932] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [152.101068] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [152.101204] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [152.101335] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [152.101468] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [152.101629] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [152.101785] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [152.101958] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [152.102093] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [152.103247] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [152.103251] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [152.110079] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [152.110727] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [152.110884] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [152.110887] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [152.118584] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [152.118705] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [152.118808] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [152.118926] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [152.119284] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [152.119497] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [152.119640] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [152.119780] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [152.119925] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [152.120080] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [152.124426] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [152.124834] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [152.125232] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1

<7> [152.125951] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<6> [152.126023] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [152.128026] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [152.143387] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [152.144450] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input55

<7> [152.145408] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [152.146186] [drm:drm_client_modeset_probe]

<7> [152.146237] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [152.146185] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [152.146247] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [152.146487] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [152.146505] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [152.146415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [152.146514] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [152.146521] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [152.146622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [152.146763] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [152.146776] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [152.146782] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [152.146789] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [152.146831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [152.147147] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [152.147181] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [152.147195] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [152.147201] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [152.147206] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [152.147211] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [152.147256] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [152.147268] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [152.147291] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [152.147302] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [152.147584] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [152.147796] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [152.147801] i915 device info: graphics version: 9

<7> [152.147804] i915 device info: media version: 9

<7> [152.147807] i915 device info: graphics stepping: F0

<7> [152.147810] i915 device info: media stepping: F0

<7> [152.147813] i915 device info: display stepping: C0

<7> [152.147815] i915 device info: base die stepping: **

<7> [152.147818] i915 device info: gt: 2

<7> [152.147821] i915 device info: memory-regions: 0x21

<7> [152.147823] i915 device info: page-sizes: 0x11000

<7> [152.147826] i915 device info: platform: KABYLAKE

<7> [152.147829] i915 device info: ppgtt-size: 48

<7> [152.147832] i915 device info: ppgtt-type: 2

<7> [152.147835] i915 device info: dma_mask_size: 39

<7> [152.147837] i915 device info: is_mobile: no

<7> [152.147840] i915 device info: is_lp: no

<7> [152.147843] i915 device info: require_force_probe: no

<7> [152.147846] i915 device info: is_dgfx: no

<7> [152.147848] i915 device info: has_64bit_reloc: yes

<7> [152.147851] i915 device info: has_64k_pages: no

<7> [152.147854] i915 device info: gpu_reset_clobbers_display: no

<7> [152.147857] i915 device info: has_reset_engine: yes

<7> [152.147860] i915 device info: has_3d_pipeline: yes

<7> [152.147862] i915 device info: has_4tile: no

<7> [152.147865] i915 device info: has_flat_ccs: no

<7> [152.147868] i915 device info: has_global_mocs: no

<7> [152.147871] i915 device info: has_gmd_id: no

<7> [152.147873] i915 device info: has_gt_uc: yes

<7> [152.147876] i915 device info: has_heci_pxp: no

<7> [152.147879] i915 device info: has_heci_gscfi: no

<7> [152.147881] i915 device info: has_guc_deprivilege: no

<7> [152.147884] i915 device info: has_l3_ccs_read: no

<7> [152.147887] i915 device info: has_l3_dpf: no

<7> [152.147889] i915 device info: has_llc: yes

<7> [152.147892] i915 device info: has_logical_ring_contexts: yes

<7> [152.147907] i915 device info: has_logical_ring_elsq: no

<7> [152.147910] i915 device info: has_media_ratio_mode: no

<7> [152.147913] i915 device info: has_mslice_steering: no

<7> [152.147915] i915 device info: has_oa_bpc_reporting: no

<7> [152.147918] i915 device info: has_oa_slice_contrib_limits: no

<7> [152.147921] i915 device info: has_oam: no

<7> [152.147924] i915 device info: has_one_eu_per_fuse_bit: no

<7> [152.147926] i915 device info: has_pxp: no

<7> [152.147929] i915 device info: has_rc6: yes

<7> [152.147932] i915 device info: has_rc6p: no

<7> [152.147934] i915 device info: has_rps: yes

<7> [152.147937] i915 device info: has_runtime_pm: yes

<7> [152.147940] i915 device info: has_snoop: no

<7> [152.147943] i915 device info: has_coherent_ggtt: yes

<7> [152.147945] i915 device info: tuning_thread_rr_after_dep: no

<7> [152.147948] i915 device info: unfenced_needs_alignment: no

<7> [152.147951] i915 device info: hws_needs_physical: no

<7> [152.147953] i915 device info: has_pooled_eu: no

<7> [152.147956] i915 device info: rawclk rate: 24000 kHz

<7> [152.147959] i915 device info: display version: 9

<7> [152.147962] i915 device info: cursor_needs_physical: no

<7> [152.147964] i915 device info: has_cdclk_crawl: no

<7> [152.147967] i915 device info: has_cdclk_squash: no

<7> [152.147970] i915 device info: has_ddi: yes

<7> [152.147972] i915 device info: has_dp_mst: yes

<7> [152.147975] i915 device info: has_dsb: no

<7> [152.147978] i915 device info: has_fpga_dbg: yes

<7> [152.147981] i915 device info: has_gmch: no

<7> [152.147983] i915 device info: has_hotplug: yes

<7> [152.147986] i915 device info: has_hti: no

<7> [152.147988] i915 device info: has_ipc: yes

<7> [152.147991] i915 device info: has_overlay: no

<7> [152.147994] i915 device info: has_psr: yes

<7> [152.147997] i915 device info: has_psr_hw_tracking: yes

<7> [152.147999] i915 device info: overlay_needs_physical: no

<7> [152.148002] i915 device info: supports_tv: no

<7> [152.148005] i915 device info: has_hdcp: yes

<7> [152.148008] i915 device info: has_dmc: yes

<7> [152.148010] i915 device info: has_dsc: no

<7> [152.148013] i915 device info: iommu: enabled

<7> [152.148016] i915 device info: available engines: 40403

<7> [152.148019] i915 device info: slice total: 1, mask=0001

<7> [152.148022] i915 device info: subslice total: 3

<7> [152.148025] i915 device info: slice0: 3 subslices, mask=00000007

<7> [152.148028] i915 device info: slice1: 0 subslices, mask=00000000

<7> [152.148031] i915 device info: slice2: 0 subslices, mask=00000000

<7> [152.148034] i915 device info: EU total: 24

<7> [152.148037] i915 device info: EU per subslice: 8

<7> [152.148039] i915 device info: has slice power gating: no

<7> [152.148042] i915 device info: has subslice power gating: no

<7> [152.148045] i915 device info: has EU power gating: yes

<6> [152.148047] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [152.148050] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [152.148053] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [152.148058] i915: Performing live selftests with st_random_seed=0xcd4bae46 st_timeout=500

<6> [152.148088] i915: Running intel_mocs_live_selftests/live_mocs_kernel

<7> [152.148485] [drm:drm_client_modeset_probe]

<7> [152.148532] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [152.148542] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [152.148752] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [152.148760] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [152.148768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [152.148974] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [152.148982] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [152.148990] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [152.149195] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [152.149202] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [152.149209] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [152.149214] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [152.149219] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [152.149238] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [152.149250] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [152.149273] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [152.149283] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [152.149358] [drm:drm_client_modeset_probe]

<7> [152.149401] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [152.149409] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [152.149611] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [152.149618] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [152.149626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [152.149824] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [152.149831] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [152.149838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [152.150060] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [152.150068] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [152.150073] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [152.150078] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [152.150083] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [152.150122] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [152.150134] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [152.150157] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [152.150167] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [152.162086] i915: Running intel_mocs_live_selftests/live_mocs_clean

<7> [152.183907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<6> [152.191142] i915: Running intel_mocs_live_selftests/live_mocs_reset

<5> [152.191488] i915 0000:00:02.0: [drm] Resetting rcs0 for mocs

<5> [152.194208] i915 0000:00:02.0: [drm] Resetting rcs0 for mocs

<5> [152.194695] i915 0000:00:02.0: [drm] Resetting chip for mocs

<7> [152.194912] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<6> [152.195616] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [152.195622] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [152.197690] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [152.198607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [152.198792] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [152.198795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<5> [152.199443] i915 0000:00:02.0: [drm] Resetting bcs0 for mocs

<5> [152.200820] i915 0000:00:02.0: [drm] Resetting bcs0 for mocs

<5> [152.201127] i915 0000:00:02.0: [drm] Resetting chip for mocs

<6> [152.201309] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [152.201313] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [152.203754] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [152.204036] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [152.204216] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [152.204219] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<5> [152.205269] i915 0000:00:02.0: [drm] Resetting vcs0 for mocs

<5> [152.206578] i915 0000:00:02.0: [drm] Resetting vcs0 for mocs

<5> [152.206776] i915 0000:00:02.0: [drm] Resetting chip for mocs

<6> [152.206976] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [152.206980] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [152.207767] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.209368] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [152.209619] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [152.209792] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [152.209795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<5> [152.210293] i915 0000:00:02.0: [drm] Resetting vecs0 for mocs

<5> [152.211735] i915 0000:00:02.0: [drm] Resetting vecs0 for mocs

<5> [152.212090] i915 0000:00:02.0: [drm] Resetting chip for mocs

<6> [152.212275] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [152.212279] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [152.214566] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [152.214819] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [152.215007] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [152.215010] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [152.218907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.229908] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.240911] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.244925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [152.245101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [152.245268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [152.245434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [152.251908] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.262907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.268092] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [152.274908] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.285911] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.296912] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.308015] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.318907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.329906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.340906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.351909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.362906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.373906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.384910] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.395909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.406906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.417906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.428907] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.439909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.450906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.461906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.472908] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.483909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.494906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.505906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.516906] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.527909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d40023f)

<7> [152.528083] [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI E/PHY E: Too many retries, giving up. First error: -110

<7> [152.539164] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [152.582437] i915: probe of 0000:00:02.0 failed with error -25

<6> [152.752016] [IGT] i915_selftest: finished subtest gt_mocs, SUCCESS

Results for igt@i915_selftest@live@gt_mocs