igt@i915_selftest@live@gt_heartbeat on fi-cfl-8109u@linus-v6.6 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-g5e82a8ee4 (x86_64) (Linux: 6.6.0-linus-v6.6-gffc253263a13+ x86_64)
Out	Starting dynamic subtest: gt_heartbeat Dynamic subtest gt_heartbeat: SUCCESS (0.800s)
Err	Starting dynamic subtest: gt_heartbeat Dynamic subtest gt_heartbeat: SUCCESS (0.800s)
Dmesg	<6> [264.658921] [IGT] i915_selftest: starting dynamic subtest gt_heartbeat <5> [264.790196] Setting dangerous option live_selftests - tainting kernel <7> [264.845543] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [264.845849] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [264.846072] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Cannon Lake LP PCH (CNP-LP) <7> [264.846275] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [264.846618] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [264.846873] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <6> [264.847551] i915 0000:00:02.0: [drm] Found 128MB of eDRAM <7> [264.847693] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [264.847875] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [264.848035] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [264.848228] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [264.848234] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [264.848647] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [264.848671] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 3ff00047 <7> [264.848869] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [264.849309] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x3a332018 <7> [264.849570] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [264.849767] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [264.849956] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [264.850142] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [264.855095] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [264.855318] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [264.855596] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [264.855894] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [264.856194] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [264.856474] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no <7> [264.856687] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [264.856835] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [264.856981] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no <7> [264.857125] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [264.857269] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [264.857412] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [264.857576] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [264.857771] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [264.858283] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [264.858519] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 228 <7> [264.858772] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [264.858982] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 317, min size 5) <7> [264.859189] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [264.859395] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [264.859717] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812) <7> [264.860043] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 30, min size 34) <7> [264.860366] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [264.860710] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [264.860994] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [264.861275] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 54, min size 78) <7> [264.861527] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [264.861764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [264.861967] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [264.862174] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [264.862382] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [264.862604] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:1 USB-Type-C:0 TBT:0 DSC:0 <7> [264.862855] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [264.863057] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT DP max link rate: 810000 <7> [264.863257] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0 <7> [264.863479] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [264.863697] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT DP max link rate: 810000 <7> [264.863913] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [264.864130] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [264.864406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [264.864688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [264.864930] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [264.865140] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [264.865342] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [264.865566] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [264.865947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [264.866195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [264.866398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [264.866640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [264.866902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [264.867106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [264.867307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [264.867527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [264.867789] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [264.868360] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [264.869128] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [264.870245] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [264.870626] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <6> [264.870850] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [264.870871] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [264.871104] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [264.871296] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [264.871539] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [264.871742] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [264.871933] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [264.872122] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [264.877390] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [264.879648] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [264.880086] i915 0000:00:02.0: [drm:intel_ddi_init [i915]] VBT says port B has lspcon <7> [264.880439] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT) <7> [264.880757] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [264.881604] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [264.881931] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI C/PHY C] Using AUX CH C (VBT) <7> [264.882247] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI C/PHY C] <7> [264.882879] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [264.883193] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI C/PHY C] <7> [264.883727] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI C/PHY C] Using DDC pin 0x2 (VBT) <7> [264.884399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [264.884748] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [264.885003] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [264.885208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [264.885410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [264.885651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [264.885959] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [264.886278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [264.886613] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [264.886933] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [264.887256] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [264.887568] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [264.887800] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [264.887995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [264.888189] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [264.888382] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [264.888608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI C/PHY C] hw state readout: disabled, pipe A <7> [264.888853] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A <7> [264.889047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B <7> [264.889240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C <7> [264.889472] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [264.889729] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [264.889937] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [264.890142] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [264.890475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [264.890804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-2] hw state readout: disabled <7> [264.891133] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:HDMI-A-1] hw state readout: disabled <7> [264.891460] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [264.891780] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [264.892043] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [264.892301] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [264.892558] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [264.892788] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [264.892983] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [264.893176] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [264.893380] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [264.893609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [264.893836] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [264.894030] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [264.894283] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [264.894511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [264.894746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [264.894949] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [264.895161] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [264.895356] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [264.895569] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [264.895853] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [264.896019] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [264.896240] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [264.896465] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7> [264.897968] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [264.898179] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [264.898373] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [264.913774] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [264.913980] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [264.914137] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [264.914291] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'1 to vcs1 <7> [264.914466] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [264.915010] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [264.915368] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [264.915594] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [264.915847] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [264.916088] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [264.916344] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [264.921239] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [264.923550] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2 <7> [264.924723] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.926279] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.927787] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.929190] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.930956] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.931843] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [264.932637] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.934705] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.936300] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.937869] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.939700] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.941690] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.942590] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a8 (err 0) <7> [264.942615] i915 0000:00:02.0: [drm:lspcon_init [i915]] LSPCON detected <7> [264.944490] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.945880] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.947460] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.949835] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.951456] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.953194] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.954950] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.956745] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.958306] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [264.959175] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON <7> [264.960057] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04 <7> [264.960711] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.75 quirks 0x0000 <7> [264.960739] i915 0000:00:02.0: [drm:lspcon_init [i915]] Vendor: Mega Chips <7> [264.961046] i915 0000:00:02.0: [drm:lspcon_init [i915]] Success: LSPCON init <7> [264.961836] i915 0000:00:02.0: [drm:lspcon_detect_hdr_capability [i915]] LSPCON capable of HDR <7> [264.962033] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [264.962714] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [264.963641] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-2] generating connector hotplug event <7> [264.964174] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:HDMI-A-1] generating connector hotplug event <6> [264.964243] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [264.967653] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [264.989985] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [264.993812] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input42 <7> [264.995392] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [264.996259] [drm:drm_client_modeset_probe] <7> [264.996318] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [264.996258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [264.996332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [264.996656] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [264.996676] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [264.996687] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] <7> [264.996654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [264.996696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2] <7> [264.997000] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] status updated from unknown to disconnected <7> [264.997017] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected <7> [264.997025] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [264.996985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [264.997034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [264.997335] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from unknown to disconnected <7> [264.997350] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <7> [264.997358] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [264.997365] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [264.997370] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [264.997376] [drm:drm_client_modeset_probe] connector 114 enabled? no <7> [264.997449] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [264.997465] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [264.997493] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [264.997505] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [264.997401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [264.998521] [drm:drm_client_modeset_probe] <7> [264.998395] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [264.998571] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [264.998582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [264.998738] i915 device info: pciid=0x3ea5 rev=0x01 platform=COFFEELAKE (subplatform=0x1) gen=9 <7> [264.998744] i915 device info: graphics version: 9 <7> [264.998747] i915 device info: media version: 9 <7> [264.998750] i915 device info: graphics stepping: <7> [264.998752] i915 device info: media stepping: <7> [264.998755] i915 device info: display stepping: <7> [264.998758] i915 device info: base die stepping: <7> [264.998761] i915 device info: gt: 3 <7> [264.998763] i915 device info: memory-regions: 0x21 <7> [264.998766] i915 device info: page-sizes: 0x11000 <7> [264.998769] i915 device info: platform: COFFEELAKE <7> [264.998772] i915 device info: ppgtt-size: 48 <7> [264.998775] i915 device info: ppgtt-type: 2 <7> [264.998777] i915 device info: dma_mask_size: 39 <7> [264.998780] i915 device info: is_mobile: no <7> [264.998783] i915 device info: is_lp: no <7> [264.998786] i915 device info: require_force_probe: no <7> [264.998789] i915 device info: is_dgfx: no <7> [264.998792] i915 device info: has_64bit_reloc: yes <7> [264.998795] i915 device info: has_64k_pages: no <7> [264.998798] i915 device info: gpu_reset_clobbers_display: no <7> [264.998801] i915 device info: has_reset_engine: yes <7> [264.998804] i915 device info: has_3d_pipeline: yes <7> [264.998806] i915 device info: has_4tile: no <7> [264.998809] i915 device info: has_flat_ccs: no <7> [264.998812] i915 device info: has_global_mocs: no <7> [264.998815] i915 device info: has_gmd_id: no <7> [264.998817] i915 device info: has_gt_uc: yes <7> [264.998820] i915 device info: has_heci_pxp: no <7> [264.998823] i915 device info: has_heci_gscfi: no <7> [264.998826] i915 device info: has_guc_deprivilege: no <7> [264.998828] i915 device info: has_l3_ccs_read: no <7> [264.998831] i915 device info: has_l3_dpf: no <7> [264.998834] i915 device info: has_llc: yes <7> [264.998836] i915 device info: has_logical_ring_contexts: yes <7> [264.998839] i915 device info: has_logical_ring_elsq: no <7> [264.998842] i915 device info: has_media_ratio_mode: no <7> [264.998845] i915 device info: has_mslice_steering: no <7> [264.998847] i915 device info: has_oa_bpc_reporting: no <7> [264.998850] i915 device info: has_oa_slice_contrib_limits: no <7> [264.998853] i915 device info: has_oam: no <7> [264.998856] i915 device info: has_one_eu_per_fuse_bit: no <7> [264.998859] i915 device info: has_pxp: no <7> [264.998861] i915 device info: has_rc6: yes <7> [264.998864] i915 device info: has_rc6p: no <7> [264.998867] i915 device info: has_rps: yes <7> [264.998869] i915 device info: has_runtime_pm: yes <7> [264.998872] i915 device info: has_snoop: no <7> [264.998875] i915 device info: has_coherent_ggtt: yes <7> [264.998879] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [264.998886] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] <7> [264.998903] i915 device info: tuning_thread_rr_after_dep: no <7> [264.998906] i915 device info: unfenced_needs_alignment: no <7> [264.998910] i915 device info: hws_needs_physical: no <7> [264.998913] i915 device info: has_pooled_eu: no <7> [264.998916] i915 device info: rawclk rate: 24000 kHz <7> [264.998920] i915 device info: display version: 9 <7> [264.998924] i915 device info: cursor_needs_physical: no <7> [264.998927] i915 device info: has_cdclk_crawl: no <7> [264.998930] i915 device info: has_cdclk_squash: no <7> [264.998934] i915 device info: has_ddi: yes <7> [264.998937] i915 device info: has_dp_mst: yes <7> [264.998940] i915 device info: has_dsb: no <7> [264.998943] i915 device info: has_fpga_dbg: yes <7> [264.998947] i915 device info: has_gmch: no <7> [264.998950] i915 device info: has_hotplug: yes <7> [264.998953] i915 device info: has_hti: no <7> [264.998957] i915 device info: has_ipc: yes <7> [264.998960] i915 device info: has_overlay: no <7> [264.998963] i915 device info: has_psr: yes <7> [264.998967] i915 device info: has_psr_hw_tracking: yes <7> [264.998970] i915 device info: overlay_needs_physical: no <7> [264.998974] i915 device info: supports_tv: no <7> [264.998977] i915 device info: has_hdcp: yes <7> [264.998980] i915 device info: has_dmc: yes <7> [264.998983] i915 device info: has_dsc: no <7> [264.998986] i915 device info: iommu: enabled <7> [264.998990] i915 device info: available engines: 40c03 <7> [264.998994] i915 device info: slice total: 2, mask=0003 <7> [264.998997] i915 device info: subslice total: 6 <7> [264.999001] i915 device info: slice0: 3 subslices, mask=00000007 <7> [264.999005] i915 device info: slice1: 3 subslices, mask=00000007 <7> [264.999009] i915 device info: slice2: 0 subslices, mask=00000000 <7> [264.999012] i915 device info: EU total: 47 <7> [264.999016] i915 device info: EU per subslice: 8 <7> [264.999019] i915 device info: has slice power gating: yes <7> [264.999022] i915 device info: has subslice power gating: no <7> [264.999025] i915 device info: has EU power gating: yes <6> [264.999029] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [264.999033] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [264.999037] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [264.998893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2] <6> [264.999043] i915: Performing live selftests with st_random_seed=0xc64280d3 st_timeout=500 <6> [264.999047] i915: Running gt_heartbeat <6> [264.999079] i915: Running intel_heartbeat_live_selftests/live_idle_flush <7> [264.999183] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected <7> [264.999192] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [264.999201] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [264.999477] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <7> [264.999485] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [264.999492] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [264.999497] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [264.999503] [drm:drm_client_modeset_probe] connector 114 enabled? no <7> [264.999551] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [264.999568] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [264.999602] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [264.999614] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [265.003515] i915: Running intel_heartbeat_live_selftests/live_idle_pulse <6> [265.004314] i915: Running intel_heartbeat_live_selftests/live_heartbeat_fast <5> [265.004379] i915 0000:00:02.0: [drm] rcs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts! <6> [265.027472] rcs0: Heartbeat delay: 4641us [3486, 4926] <5> [265.027593] i915 0000:00:02.0: [drm] bcs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts! <6> [265.049450] bcs0: Heartbeat delay: 3947us [3924, 4902] <5> [265.049536] i915 0000:00:02.0: [drm] vcs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts! <6> [265.069443] vcs0: Heartbeat delay: 3936us [3819, 3952] <5> [265.069518] i915 0000:00:02.0: [drm] vcs1 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts! <6> [265.089440] vcs1: Heartbeat delay: 3937us [3838, 3945] <5> [265.089511] i915 0000:00:02.0: [drm] vecs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts! <7> [265.091458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <6> [265.109492] vecs0: Heartbeat delay: 3924us [3814, 3935] <6> [265.109844] i915: Running intel_heartbeat_live_selftests/live_heartbeat_off <5> [265.109980] i915 0000:00:02.0: [drm] rcs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts! <5> [265.110304] i915 0000:00:02.0: [drm] bcs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts! <5> [265.110539] i915 0000:00:02.0: [drm] vcs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts! <5> [265.110757] i915 0000:00:02.0: [drm] vcs1 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts! <5> [265.111006] i915 0000:00:02.0: [drm] vecs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts! <7> [265.111636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [265.112135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [265.112499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [265.112833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [265.113168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [265.141820] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [265.188172] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [265.225950] i915: probe of 0000:00:02.0 failed with error -25 <6> [265.460291] [IGT] i915_selftest: finished subtest gt_heartbeat, SUCCESS

<6> [264.658921] [IGT] i915_selftest: starting dynamic subtest gt_heartbeat

<5> [264.790196] Setting dangerous option live_selftests - tainting kernel

<7> [264.845543] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [264.845849] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [264.846072] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Cannon Lake LP PCH (CNP-LP)

<7> [264.846275] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [264.846618] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [264.846873] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<6> [264.847551] i915 0000:00:02.0: [drm] Found 128MB of eDRAM

<7> [264.847693] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [264.847875] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [264.848035] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [264.848228] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [264.848234] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [264.848647] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [264.848671] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 3ff00047

<7> [264.848869] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [264.849309] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x3a332018

<7> [264.849570] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [264.849767] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [264.849956] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [264.850142] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [264.855095] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [264.855318] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [264.855596] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [264.855894] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [264.856194] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [264.856474] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no

<7> [264.856687] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [264.856835] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [264.856981] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no

<7> [264.857125] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [264.857269] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [264.857412] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [264.857576] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [264.857771] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [264.858283] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [264.858519] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 228

<7> [264.858772] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [264.858982] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 317, min size 5)

<7> [264.859189] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [264.859395] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [264.859717] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812)

<7> [264.860043] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 30, min size 34)

<7> [264.860366] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [264.860710] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [264.860994] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [264.861275] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 54, min size 78)

<7> [264.861527] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [264.861764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [264.861967] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [264.862174] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [264.862382] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [264.862604] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:1 USB-Type-C:0 TBT:0 DSC:0

<7> [264.862855] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [264.863057] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT DP max link rate: 810000

<7> [264.863257] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0

<7> [264.863479] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [264.863697] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT DP max link rate: 810000

<7> [264.863913] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [264.864130] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [264.864406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [264.864688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [264.864930] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [264.865140] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [264.865342] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [264.865566] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [264.865947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [264.866195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [264.866398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [264.866640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [264.866902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [264.867106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [264.867307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [264.867527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [264.867789] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [264.868360] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [264.869128] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [264.870245] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [264.870626] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<6> [264.870850] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [264.870871] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [264.871104] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [264.871296] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [264.871539] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [264.871742] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [264.871933] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [264.872122] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [264.877390] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [264.879648] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [264.880086] i915 0000:00:02.0: [drm:intel_ddi_init [i915]] VBT says port B has lspcon

<7> [264.880439] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT)

<7> [264.880757] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [264.881604] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [264.881931] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI C/PHY C] Using AUX CH C (VBT)

<7> [264.882247] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI C/PHY C]

<7> [264.882879] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [264.883193] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI C/PHY C]

<7> [264.883727] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI C/PHY C] Using DDC pin 0x2 (VBT)

<7> [264.884399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [264.884748] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [264.885003] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [264.885208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [264.885410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [264.885651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [264.885959] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [264.886278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [264.886613] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [264.886933] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [264.887256] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [264.887568] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [264.887800] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [264.887995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [264.888189] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [264.888382] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [264.888608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [264.888853] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A

<7> [264.889047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B

<7> [264.889240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C

<7> [264.889472] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [264.889729] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [264.889937] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [264.890142] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [264.890475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [264.890804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-2] hw state readout: disabled

<7> [264.891133] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:HDMI-A-1] hw state readout: disabled

<7> [264.891460] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [264.891780] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [264.892043] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [264.892301] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [264.892558] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [264.892788] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [264.892983] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [264.893176] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [264.893380] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [264.893609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [264.893836] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [264.894030] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [264.894283] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [264.894511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [264.894746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [264.894949] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [264.895161] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [264.895356] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [264.895569] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [264.895853] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [264.896019] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [264.896240] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [264.896465] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global

<7> [264.897968] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [264.898179] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [264.898373] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [264.913774] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [264.913980] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [264.914137] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [264.914291] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'1 to vcs1

<7> [264.914466] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [264.915010] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [264.915368] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [264.915594] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [264.915847] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [264.916088] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [264.916344] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [264.921239] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [264.923550] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2

<7> [264.924723] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.926279] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.927787] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.929190] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.930956] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.931843] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [264.932637] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.934705] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.936300] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.937869] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.939700] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.941690] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.942590] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a8 (err 0)

<7> [264.942615] i915 0000:00:02.0: [drm:lspcon_init [i915]] LSPCON detected

<7> [264.944490] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.945880] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.947460] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.949835] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.951456] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.953194] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.954950] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.956745] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.958306] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [264.959175] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON

<7> [264.960057] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04

<7> [264.960711] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.75 quirks 0x0000

<7> [264.960739] i915 0000:00:02.0: [drm:lspcon_init [i915]] Vendor: Mega Chips

<7> [264.961046] i915 0000:00:02.0: [drm:lspcon_init [i915]] Success: LSPCON init

<7> [264.961836] i915 0000:00:02.0: [drm:lspcon_detect_hdr_capability [i915]] LSPCON capable of HDR

<7> [264.962033] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [264.962714] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [264.963641] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-2] generating connector hotplug event

<7> [264.964174] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:HDMI-A-1] generating connector hotplug event

<6> [264.964243] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [264.967653] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [264.989985] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [264.993812] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input42

<7> [264.995392] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [264.996259] [drm:drm_client_modeset_probe]

<7> [264.996318] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [264.996258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [264.996332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [264.996656] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [264.996676] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [264.996687] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]

<7> [264.996654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [264.996696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]

<7> [264.997000] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] status updated from unknown to disconnected

<7> [264.997017] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected

<7> [264.997025] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [264.996985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [264.997034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [264.997335] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from unknown to disconnected

<7> [264.997350] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<7> [264.997358] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [264.997365] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [264.997370] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [264.997376] [drm:drm_client_modeset_probe] connector 114 enabled? no

<7> [264.997449] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [264.997465] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [264.997493] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [264.997505] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [264.997401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [264.998521] [drm:drm_client_modeset_probe]

<7> [264.998395] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [264.998571] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [264.998582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [264.998738] i915 device info: pciid=0x3ea5 rev=0x01 platform=COFFEELAKE (subplatform=0x1) gen=9

<7> [264.998744] i915 device info: graphics version: 9

<7> [264.998747] i915 device info: media version: 9

<7> [264.998750] i915 device info: graphics stepping: **

<7> [264.998752] i915 device info: media stepping: **

<7> [264.998755] i915 device info: display stepping: **

<7> [264.998758] i915 device info: base die stepping: **

<7> [264.998761] i915 device info: gt: 3

<7> [264.998763] i915 device info: memory-regions: 0x21

<7> [264.998766] i915 device info: page-sizes: 0x11000

<7> [264.998769] i915 device info: platform: COFFEELAKE

<7> [264.998772] i915 device info: ppgtt-size: 48

<7> [264.998775] i915 device info: ppgtt-type: 2

<7> [264.998777] i915 device info: dma_mask_size: 39

<7> [264.998780] i915 device info: is_mobile: no

<7> [264.998783] i915 device info: is_lp: no

<7> [264.998786] i915 device info: require_force_probe: no

<7> [264.998789] i915 device info: is_dgfx: no

<7> [264.998792] i915 device info: has_64bit_reloc: yes

<7> [264.998795] i915 device info: has_64k_pages: no

<7> [264.998798] i915 device info: gpu_reset_clobbers_display: no

<7> [264.998801] i915 device info: has_reset_engine: yes

<7> [264.998804] i915 device info: has_3d_pipeline: yes

<7> [264.998806] i915 device info: has_4tile: no

<7> [264.998809] i915 device info: has_flat_ccs: no

<7> [264.998812] i915 device info: has_global_mocs: no

<7> [264.998815] i915 device info: has_gmd_id: no

<7> [264.998817] i915 device info: has_gt_uc: yes

<7> [264.998820] i915 device info: has_heci_pxp: no

<7> [264.998823] i915 device info: has_heci_gscfi: no

<7> [264.998826] i915 device info: has_guc_deprivilege: no

<7> [264.998828] i915 device info: has_l3_ccs_read: no

<7> [264.998831] i915 device info: has_l3_dpf: no

<7> [264.998834] i915 device info: has_llc: yes

<7> [264.998836] i915 device info: has_logical_ring_contexts: yes

<7> [264.998839] i915 device info: has_logical_ring_elsq: no

<7> [264.998842] i915 device info: has_media_ratio_mode: no

<7> [264.998845] i915 device info: has_mslice_steering: no

<7> [264.998847] i915 device info: has_oa_bpc_reporting: no

<7> [264.998850] i915 device info: has_oa_slice_contrib_limits: no

<7> [264.998853] i915 device info: has_oam: no

<7> [264.998856] i915 device info: has_one_eu_per_fuse_bit: no

<7> [264.998859] i915 device info: has_pxp: no

<7> [264.998861] i915 device info: has_rc6: yes

<7> [264.998864] i915 device info: has_rc6p: no

<7> [264.998867] i915 device info: has_rps: yes

<7> [264.998869] i915 device info: has_runtime_pm: yes

<7> [264.998872] i915 device info: has_snoop: no

<7> [264.998875] i915 device info: has_coherent_ggtt: yes

<7> [264.998879] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [264.998886] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]

<7> [264.998903] i915 device info: tuning_thread_rr_after_dep: no

<7> [264.998906] i915 device info: unfenced_needs_alignment: no

<7> [264.998910] i915 device info: hws_needs_physical: no

<7> [264.998913] i915 device info: has_pooled_eu: no

<7> [264.998916] i915 device info: rawclk rate: 24000 kHz

<7> [264.998920] i915 device info: display version: 9

<7> [264.998924] i915 device info: cursor_needs_physical: no

<7> [264.998927] i915 device info: has_cdclk_crawl: no

<7> [264.998930] i915 device info: has_cdclk_squash: no

<7> [264.998934] i915 device info: has_ddi: yes

<7> [264.998937] i915 device info: has_dp_mst: yes

<7> [264.998940] i915 device info: has_dsb: no

<7> [264.998943] i915 device info: has_fpga_dbg: yes

<7> [264.998947] i915 device info: has_gmch: no

<7> [264.998950] i915 device info: has_hotplug: yes

<7> [264.998953] i915 device info: has_hti: no

<7> [264.998957] i915 device info: has_ipc: yes

<7> [264.998960] i915 device info: has_overlay: no

<7> [264.998963] i915 device info: has_psr: yes

<7> [264.998967] i915 device info: has_psr_hw_tracking: yes

<7> [264.998970] i915 device info: overlay_needs_physical: no

<7> [264.998974] i915 device info: supports_tv: no

<7> [264.998977] i915 device info: has_hdcp: yes

<7> [264.998980] i915 device info: has_dmc: yes

<7> [264.998983] i915 device info: has_dsc: no

<7> [264.998986] i915 device info: iommu: enabled

<7> [264.998990] i915 device info: available engines: 40c03

<7> [264.998994] i915 device info: slice total: 2, mask=0003

<7> [264.998997] i915 device info: subslice total: 6

<7> [264.999001] i915 device info: slice0: 3 subslices, mask=00000007

<7> [264.999005] i915 device info: slice1: 3 subslices, mask=00000007

<7> [264.999009] i915 device info: slice2: 0 subslices, mask=00000000

<7> [264.999012] i915 device info: EU total: 47

<7> [264.999016] i915 device info: EU per subslice: 8

<7> [264.999019] i915 device info: has slice power gating: yes

<7> [264.999022] i915 device info: has subslice power gating: no

<7> [264.999025] i915 device info: has EU power gating: yes

<6> [264.999029] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [264.999033] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [264.999037] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [264.998893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]

<6> [264.999043] i915: Performing live selftests with st_random_seed=0xc64280d3 st_timeout=500

<6> [264.999047] i915: Running gt_heartbeat

<6> [264.999079] i915: Running intel_heartbeat_live_selftests/live_idle_flush

<7> [264.999183] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected

<7> [264.999192] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [264.999201] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [264.999477] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<7> [264.999485] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [264.999492] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [264.999497] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [264.999503] [drm:drm_client_modeset_probe] connector 114 enabled? no

<7> [264.999551] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [264.999568] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [264.999602] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [264.999614] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [265.003515] i915: Running intel_heartbeat_live_selftests/live_idle_pulse

<6> [265.004314] i915: Running intel_heartbeat_live_selftests/live_heartbeat_fast

<5> [265.004379] i915 0000:00:02.0: [drm] rcs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts!

<6> [265.027472] rcs0: Heartbeat delay: 4641us [3486, 4926]

<5> [265.027593] i915 0000:00:02.0: [drm] bcs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts!

<6> [265.049450] bcs0: Heartbeat delay: 3947us [3924, 4902]

<5> [265.049536] i915 0000:00:02.0: [drm] vcs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts!

<6> [265.069443] vcs0: Heartbeat delay: 3936us [3819, 3952]

<5> [265.069518] i915 0000:00:02.0: [drm] vcs1 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts!

<6> [265.089440] vcs1: Heartbeat delay: 3937us [3838, 3945]

<5> [265.089511] i915 0000:00:02.0: [drm] vecs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts!

<7> [265.091458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<6> [265.109492] vecs0: Heartbeat delay: 3924us [3814, 3935]

<6> [265.109844] i915: Running intel_heartbeat_live_selftests/live_heartbeat_off

<5> [265.109980] i915 0000:00:02.0: [drm] rcs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts!

<5> [265.110304] i915 0000:00:02.0: [drm] bcs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts!

<5> [265.110539] i915 0000:00:02.0: [drm] vcs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts!

<5> [265.110757] i915 0000:00:02.0: [drm] vcs1 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts!

<5> [265.111006] i915 0000:00:02.0: [drm] vecs0 heartbeat interval adjusted to a non-default value which may cause engine resets to target innocent contexts!

<7> [265.111636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [265.112135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [265.112499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [265.112833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [265.113168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [265.141820] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [265.188172] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [265.225950] i915: probe of 0000:00:02.0 failed with error -25

<6> [265.460291] [IGT] i915_selftest: finished subtest gt_heartbeat, SUCCESS

Results for igt@i915_selftest@live@gt_heartbeat