Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.28-g5e82a8ee4 (x86_64) (Linux: 6.6.0-linus-v6.6-gffc253263a13+ x86_64)
Out 
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.602s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.602s)
Dmesg
<7> [107.248213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [107.248485] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [107.248676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [107.249350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [107.301362] Console: switching to colour dummy device 80x25
<6> [107.301442] [IGT] kms_force_connector_basic: executing
<7> [107.304940] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [107.306260] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [107.306594] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [107.307441] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [107.307451] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [107.307460] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [107.307660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [107.359352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [107.379234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.379254] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [107.379571] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [107.397808] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.397817] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [107.398010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [107.398265] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [107.398352] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [107.398363] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [107.398590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [107.450350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [107.468070] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.468086] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [107.468443] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [107.486239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.486248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [107.486456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [107.486677] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [107.486730] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [107.486738] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [107.486933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [107.538351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [107.557189] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.557204] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [107.557531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [107.575743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.575753] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [107.575971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [107.576270] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<6> [107.576402] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [107.576680] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [107.576688] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [107.576696] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [107.576906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [107.628355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [107.648246] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.648282] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [107.648611] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [107.667400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.667416] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [107.667608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [107.667826] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from disconnected to connected
<7> [107.667932] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [107.667939] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [107.667947] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [107.667953] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [107.667959] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [107.667965] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [107.668033] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [107.668040] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [107.668276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [107.720350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [107.738015] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.738040] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [107.738360] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [107.755597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.755613] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [107.755811] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [107.756169] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [107.756179] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [107.756189] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [107.756199] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [107.756208] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [107.756217] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [107.756528] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:114:HDMI-A-1] EDID override set
<7> [107.756559] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [107.756568] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [107.756773] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [107.756988] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD monitor IGT
<7> [107.756993] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD size 24, SAD count 0
<7> [107.808353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [107.826649] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [107.826680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [107.827416] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [107.827441] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [107.827461] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [107.827477] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [107.827498] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [107.827512] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [107.827528] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [107.827543] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [107.827557] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [107.827572] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [107.827586] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [107.828077] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:114:HDMI-A-1] EDID override set
<7> [107.828190] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [107.828207] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [107.828787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [107.829472] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD monitor IGT
<7> [107.829487] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD size 24, SAD count 0
<7> [107.829499] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:114:HDMI-A-1] EDID changed, epoch counter 4
<7> [107.880350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [107.900816] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [107.900849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [107.901652] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [107.901676] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [107.901699] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [107.901714] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [107.901730] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [107.901747] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [107.901762] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [107.901777] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [107.902266] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:114:HDMI-A-1] EDID override reset
<7> [107.902355] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [107.902374] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [107.902981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [107.955361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [107.976980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.977018] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [107.977511] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [107.998367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.998381] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [107.998576] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:114:HDMI-A-1] EDID changed, epoch counter 5
<7> [107.998594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [107.998914] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [107.998923] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [107.998931] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [107.998938] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [107.998946] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [107.998953] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [107.998959] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [107.998965] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [107.998971] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [107.998976] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [107.999260] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [107.999272] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [107.999284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [107.999643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [108.051376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [108.070654] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.070669] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [108.070956] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [108.089187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.089196] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [108.089399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [108.089627] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from connected to disconnected
<7> [108.089646] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [108.089739] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [108.089747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [108.089951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [108.141364] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [108.159022] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.159035] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [108.159338] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [108.178226] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.178233] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [108.178413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [108.178615] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<6> [108.178741] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [108.178914] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [108.179621] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:DP-1] EDID override reset
<7> [108.179663] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [108.179674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [108.180003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [108.180688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [108.181336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [108.181989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [108.182931] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [108.183353] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [108.184429] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.186077] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.187727] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.189349] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.191168] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.193064] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.194814] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.196588] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.198162] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.199016] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [108.199935] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [108.200730] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [108.201281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [108.201655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [108.201985] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [108.202324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [108.203108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [108.203473] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [108.203728] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:108:DP-2] EDID override reset
<7> [108.203768] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]
<7> [108.203778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [108.204097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [108.204767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [108.205105] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected
<7> [108.205420] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [108.205431] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [108.205442] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [108.205754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [108.257360] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [108.276197] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.276213] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [108.276524] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [108.297455] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.297466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [108.297693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [108.297947] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [108.298023] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [108.298031] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [108.298303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [108.349383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [108.373859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.373883] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [108.374465] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [108.394832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.394843] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [108.395093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [108.395417] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [108.395698] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:114:HDMI-A-1] EDID override reset
<7> [108.395738] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [108.395748] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [108.396050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [108.447352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [108.466185] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.466202] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [108.466562] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [108.484828] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.484838] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [108.485074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [108.485388] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<6> [108.486118] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [108.486400] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [108.486410] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [108.486419] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [108.486643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [108.537352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [108.557782] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.557799] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [108.558183] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [108.577648] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.577658] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [108.577861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [108.578089] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [108.578552] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [108.579341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [108.579632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [108.580308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [108.581099] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [108.581115] [drm:drm_client_modeset_probe]
<7> [108.581623] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [108.581674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [108.582076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [108.583382] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [108.583626] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [108.584645] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.586200] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.587902] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.589503] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.591333] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.593308] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.595099] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.596901] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.598504] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [108.599602] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [108.600510] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [108.601189] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [108.601727] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [108.602193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [108.602432] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [108.602631] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [108.603399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [108.603798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [108.603811] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]
<7> [108.603819] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [108.604149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [108.604700] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [108.604936] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected
<7> [108.604945] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [108.604952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [108.605150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [108.657352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [108.676768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.676785] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [108.677112] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [108.695955] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.695965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [108.696234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [108.696563] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [108.696572] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [108.696587] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [108.696592] [drm:drm_client_modeset_probe] connector 108 enabled? no
<7> [108.696596] [drm:drm_client_modeset_probe] connector 114 enabled? no
<7> [108.696821] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [108.696851] [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [108.697429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [108.697780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [108.698393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<6> [108.700592] Console: switching to colour frame buffer device 128x48
Created at 2023-10-31 09:59:03