igt@kms_force_connector_basic@force-edid on bat-kbl-2@linus-v6.6 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-g5e82a8ee4 (x86_64) (Linux: 6.6.0-linus-v6.6-gffc253263a13+ x86_64)
Out	Opened device: /dev/dri/card0 Starting subtest: force-edid Subtest force-edid: SUCCESS (0.642s)
Err	Starting subtest: force-edid Subtest force-edid: SUCCESS (0.642s)
Dmesg	<6> [105.007226] [IGT] kms_force_connector_basic: executing <7> [105.010713] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [105.011583] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [105.011910] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [105.012746] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [105.012759] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [105.012770] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [105.013011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [105.064368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [105.083664] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.083680] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [105.084005] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [105.103344] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.103354] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [105.103574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [105.103829] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <7> [105.103905] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [105.103914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [105.104178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [105.155353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [105.174194] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.174210] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [105.174537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [105.192758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.192767] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [105.192990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [105.193286] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <7> [105.193363] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [105.193376] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [105.193697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [105.245351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [105.264195] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.264211] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [105.264537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [105.283295] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.283305] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [105.283528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [105.283781] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <6> [105.283893] [IGT] kms_force_connector_basic: starting subtest force-edid <7> [105.284190] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 2 or reprobing <7> [105.284201] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [105.284212] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1] <7> [105.284559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [105.336352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [105.355656] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.355683] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [105.355971] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [105.375821] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.375834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [105.376009] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [105.376241] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from disconnected to connected <7> [105.376670] [drm:drm_client_modeset_probe] <7> [105.376857] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes : <7> [105.376867] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [105.376878] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [105.376887] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [105.376896] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [105.376905] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [105.376927] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [105.376939] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [105.377349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [105.378018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [105.378667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [105.379456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [105.380540] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2 <7> [105.380881] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms <7> [105.381988] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.383660] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.385337] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.387072] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.388901] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.390673] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.392476] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.394174] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.395786] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.396693] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON <7> [105.397500] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04 <7> [105.398191] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000 <7> [105.398733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [105.399114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [105.399464] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [105.399790] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [105.400597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [105.400944] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [105.400959] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] <7> [105.400971] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2] <7> [105.401414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [105.402074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [105.402520] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected <7> [105.402533] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [105.402543] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1] <7> [105.402855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [105.454376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [105.473179] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.473204] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [105.473448] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [105.492683] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.492698] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [105.492875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [105.493217] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes : <7> [105.493228] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [105.493239] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [105.493249] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [105.493258] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [105.493268] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [105.493277] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [105.493285] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [105.493291] [drm:drm_client_modeset_probe] connector 114 enabled? yes <7> [105.493346] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [105.493363] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 114 <7> [105.493370] [drm:drm_client_modeset_probe] looking for preferred mode on connector 114 0 <7> [105.493377] [drm:drm_client_modeset_probe] found mode 1024x768 <7> [105.493383] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [105.493433] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [105.493443] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1] <7> [105.493760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [105.494497] [drm:drm_client_modeset_probe] desired mode 1024x768 set on crtc 51 (0,0) <7> [105.494737] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [105.494760] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7> [105.497673] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 1024x768 fb: 0x00180000 <6> [105.499416] fbcon: i915drmfb (fb0) is primary device <6> [105.500791] Console: switching to colour frame buffer device 128x48 <6> [105.500867] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [105.545211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [105.562415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.562441] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [105.562681] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [105.579074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.579105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [105.579393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [105.579830] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes : <7> [105.579839] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [105.579846] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [105.579852] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [105.579857] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [105.579863] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [105.583709] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:114:HDMI-A-1] EDID override set <7> [105.583755] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [105.583766] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1] <7> [105.584126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [105.585217] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD monitor IGT <7> [105.585227] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD size 24, SAD count 0 <7> [105.636354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [105.652826] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [105.652848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [105.653262] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [105.653276] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE <7> [105.653289] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [105.653299] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE <7> [105.653311] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes : <7> [105.653319] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa <7> [105.653328] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [105.653336] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [105.653345] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [105.653352] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [105.653614] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:114:HDMI-A-1] EDID override reset <7> [105.653762] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [105.653772] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1] <7> [105.654105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [105.705352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [105.725223] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.725252] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [105.725579] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [105.745452] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.745472] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [105.745796] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:114:HDMI-A-1] EDID changed, epoch counter 2 <7> [105.745822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [105.746363] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa <7> [105.746377] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE <7> [105.746389] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [105.746399] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE <7> [105.746411] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes : <7> [105.746420] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [105.746429] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [105.746438] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [105.746447] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [105.746456] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [105.746787] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 2 to 0 or reprobing <7> [105.746798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [105.746811] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [105.747180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [105.798356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [105.817062] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.817075] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [105.817368] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [105.836215] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.836223] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [105.836403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [105.836604] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from connected to disconnected <7> [105.836622] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <7> [105.836874] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [105.836881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [105.837109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [105.888353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [105.906010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.906024] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [105.906354] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [105.925262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [105.925269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [105.925448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [105.925649] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <6> [105.925798] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS <7> [105.925974] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [105.926708] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:DP-1] EDID override reset <7> [105.926751] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [105.926761] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [105.927087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [105.927770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [105.928415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [105.929070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [105.930021] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2 <7> [105.930425] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms <7> [105.931200] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.932923] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.934590] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.936123] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.937925] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.939727] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.941495] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.943401] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.945034] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [105.945911] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON <7> [105.946810] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04 <7> [105.947375] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000 <7> [105.947861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [105.948221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [105.948440] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [105.948643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [105.949314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [105.949614] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [105.949786] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:108:DP-2] EDID override reset <7> [105.949825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] <7> [105.949835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2] <7> [105.950026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [105.950590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [105.950842] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected <7> [105.951040] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [105.951048] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [105.951058] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [105.951287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [106.002350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [106.021073] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [106.021087] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [106.021437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [106.040277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [106.040285] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [106.040465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [106.040667] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <7> [106.040738] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [106.040745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [106.040925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [106.092355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [106.110611] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [106.110626] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [106.110938] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [106.130820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [106.130831] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [106.131187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [106.131558] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <7> [106.131801] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:114:HDMI-A-1] EDID override reset <7> [106.131846] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [106.131858] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [106.132212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [106.183352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [106.202105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [106.202117] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [106.202421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [106.221309] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [106.221316] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [106.221493] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [106.221696] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <6> [106.222195] [IGT] kms_force_connector_basic: exiting, ret=0 <7> [106.222450] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [106.222460] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [106.222472] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [106.222798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [106.274371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [106.294265] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [106.294280] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [106.294570] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [106.313249] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [106.313258] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [106.313458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [106.313688] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <7> [106.314522] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:114:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36) <7> [106.314809] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [106.315074] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [106.315312] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:107:DDI C/PHY C] [CRTC:51:pipe A] <7> [106.315519] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [106.315730] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [106.315918] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [106.316104] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [106.316399] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [106.316634] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [106.316840] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1024) <7> [106.317040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 1344) <7> [106.317252] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1024) <7> [106.317532] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 1344) <7> [106.317770] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1048) <7> [106.317983] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 1184) <7> [106.318223] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 768) <7> [106.318451] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 806) <7> [106.318638] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 768) <7> [106.318918] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 806) <7> [106.319106] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 771) <7> [106.319341] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 777) <7> [106.319579] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1024) <7> [106.319767] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 1344) <7> [106.319954] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1024) <7> [106.320180] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 1344) <7> [106.320460] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1048) <7> [106.320781] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 1184) <7> [106.321100] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 768) <7> [106.321443] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 806) <7> [106.321764] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 768) <7> [106.322083] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 806) <7> [106.322422] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 771) <7> [106.322741] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 777) <7> [106.323059] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [106.323402] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [106.323721] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [106.324040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000021) <7> [106.324383] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.cfgcr1 (expected 0x00000000, found 0x802aab7b) <7> [106.324704] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.cfgcr2 (expected 0x00000000, found 0x000007a4) <7> [106.325023] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [106.325412] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 64999) <7> [106.325734] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 64999) <7> [106.326053] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 64999) <7> [106.326392] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [106.326763] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [106.327102] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 860), size 0 -> 860 <7> [106.327424] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 860 - 892), size 0 -> 32 <7> [106.327725] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [106.328026] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 2, 2, 2, 4, 4, 5, 5, 0, 0, 0 <7> [106.328347] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 14, 19, 20, 37, 38, 47, 47, 0, 0, 0 <7> [106.328649] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 15, 20, 21, 38, 39, 48, 48, 0, 0, 0 <7> [106.328987] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (64999 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz) <7> [106.329327] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (4063 kHz) > old min cdclk (0 kHz) <7> [106.329654] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [106.329975] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [106.330312] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 1 <7> [106.330628] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 1 <7> [106.330945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset] <7> [106.331281] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [106.331600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [106.331920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [106.332257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [106.332573] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [106.332893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [106.333230] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [106.333547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [106.333865] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [106.334205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [106.334523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [106.334844] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64999, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa <7> [106.335184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1024x768": 60 64999 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [106.335504] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64999, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa <7> [106.335823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 64999, pipe src: 1024x768+0+0, pixel rate 64999 <7> [106.336159] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 166, ips linetime: 0 <7> [106.336478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [106.336796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [106.337116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [106.337455] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x802aab7b, cfgcr2: 0x7a4 <7> [106.337768] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [106.338089] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [106.338427] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [106.338745] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [106.339062] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [106.339400] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [106.339716] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [106.340034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:118] 1024x768 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [106.340372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [106.340690] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1024.000000x768.000000+0.000000+0.000000 dst: 1024x768+0+0 <7> [106.341010] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [106.341395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [106.342535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [106.342788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [106.343366] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [106.344110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [106.344548] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B] <7> [106.344807] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:96:DP-MST A] <7> [106.345017] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:97:DP-MST B] <7> [106.345244] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:98:DP-MST C] <7> [106.345450] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI C/PHY C] <7> [106.345630] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A] <7> [106.345806] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B] <7> [106.346063] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C] <7> [106.346282] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [106.346584] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [106.346806] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [106.346997] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [106.347417] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 0x1, on? 0) for [CRTC:51:pipe A] <7> [106.347652] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1 <7> [106.348349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [106.348655] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [106.350728] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 6291456 bytes of contiguous stolen space for FBC, limit: 1 <7> [106.350958] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A] <7> [106.366657] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:114:HDMI-A-1] <7> [106.366948] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [106.367509] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [106.367995] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7> [106.368009] [drm:drm_client_modeset_probe] <7> [106.368326] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [106.368371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [106.369485] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2 <7> [106.369734] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms <7> [106.370725] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [106.372348] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [106.373965] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [106.375588] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [106.377348] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [106.379169] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [106.380977] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [106.382765] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [106.384388] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [106.385298] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON <7> [106.386187] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04 <7> [106.386863] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000 <7> [106.387560] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [106.387571] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] <7> [106.387578] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2] <7> [106.387888] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected <7> [106.387894] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [106.387900] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [106.439375] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [106.442762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [106.442773] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [106.443006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [106.446276] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [106.446284] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [106.446521] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <7> [106.446529] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [106.446557] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [106.446562] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [106.446566] [drm:drm_client_modeset_probe] connector 114 enabled? no <7> [106.446812] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [106.446845] [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config <7> [106.447583] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [106.447889] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [106.448287] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [106.448590] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [106.448868] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [106.449121] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [106.449489] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1024, found 0) <7> [106.449868] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 1344, found 0) <7> [106.450199] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1024, found 0) <7> [106.450478] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 1344, found 0) <7> [106.450732] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1048, found 0) <7> [106.451118] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 1184, found 0) <7> [106.451428] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 768, found 0) <7> [106.451703] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 806, found 0) <7> [106.451974] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 768, found 0) <7> [106.452272] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 806, found 0) <7> [106.452554] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 771, found 0) <7> [106.452851] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 777, found 0) <7> [106.453106] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1024, found 0) <7> [106.453398] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 1344, found 0) <7> [106.453676] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1024, found 0) <7> [106.453928] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 1344, found 0) <7> [106.454369] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1048, found 0) <7> [106.454718] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 1184, found 0) <7> [106.454973] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 768, found 0) <7> [106.455258] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 806, found 0) <7> [106.455535] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 768, found 0) <7> [106.455944] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 806, found 0) <7> [106.456278] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 771, found 0) <7> [106.456554] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 777, found 0) <7> [106.456809] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [106.457118] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [106.457561] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [106.457907] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [106.458199] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 64999, found 0) <7> [106.458507] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 64999, found 0) <7> [106.458760] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 64999, found 0) <7> [106.459082] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [106.459512] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 1 <7> [106.459872] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [106.460172] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 860) -> ( 0 - 0), size 860 -> 0 <7> [106.460465] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 860 - 892) -> ( 0 - 0), size 32 -> 0 <7> [106.460789] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [106.461164] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 2, 2, 2, 4, 4, 5, 5, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [106.461482] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 5, 14, 19, 20, 37, 38, 47, 47, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [106.461721] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 6, 15, 20, 21, 38, 39, 48, 48, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [106.461995] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [106.462428] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [106.462763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset] <7> [106.463017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [106.463310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [106.463585] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [106.464886] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [106.466907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [106.467280] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 0x1, on? 1) for [CRTC:51:pipe A] <7> [106.467615] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1 <7> [106.467876] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A] <7> [106.468162] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B] <7> [106.468554] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:96:DP-MST A] <7> [106.468823] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:97:DP-MST B] <7> [106.469061] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:98:DP-MST C] <7> [106.469433] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI C/PHY C] <7> [106.469767] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A] <7> [106.470170] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B] <7> [106.470474] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C] <7> [106.470715] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:114:HDMI-A-1] <7> [106.470984] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [106.471415] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [106.471797] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [106.472078] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [106.472515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [106.472974] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [106.477251] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<6> [105.007226] [IGT] kms_force_connector_basic: executing

<7> [105.010713] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [105.011583] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<7> [105.011910] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [105.012746] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing

<7> [105.012759] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [105.012770] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [105.013011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [105.064368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [105.083664] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.083680] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [105.084005] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [105.103344] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.103354] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [105.103574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [105.103829] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<7> [105.103905] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [105.103914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [105.104178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [105.155353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [105.174194] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.174210] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [105.174537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [105.192758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.192767] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [105.192990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [105.193286] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<7> [105.193363] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [105.193376] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [105.193697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [105.245351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [105.264195] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.264211] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [105.264537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [105.283295] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.283305] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [105.283528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [105.283781] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<6> [105.283893] [IGT] kms_force_connector_basic: starting subtest force-edid

<7> [105.284190] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 2 or reprobing

<7> [105.284201] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [105.284212] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [105.284559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [105.336352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [105.355656] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.355683] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [105.355971] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [105.375821] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.375834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [105.376009] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [105.376241] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from disconnected to connected

<7> [105.376670] [drm:drm_client_modeset_probe]

<7> [105.376857] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :

<7> [105.376867] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [105.376878] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [105.376887] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [105.376896] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [105.376905] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [105.376927] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [105.376939] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [105.377349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [105.378018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [105.378667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [105.379456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [105.380540] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2

<7> [105.380881] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms

<7> [105.381988] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.383660] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.385337] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.387072] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.388901] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.390673] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.392476] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.394174] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.395786] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.396693] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON

<7> [105.397500] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04

<7> [105.398191] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000

<7> [105.398733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [105.399114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [105.399464] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [105.399790] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [105.400597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [105.400944] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [105.400959] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]

<7> [105.400971] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]

<7> [105.401414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [105.402074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [105.402520] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected

<7> [105.402533] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [105.402543] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [105.402855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [105.454376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [105.473179] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.473204] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [105.473448] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [105.492683] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.492698] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [105.492875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [105.493217] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :

<7> [105.493228] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [105.493239] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [105.493249] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [105.493258] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [105.493268] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [105.493277] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [105.493285] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [105.493291] [drm:drm_client_modeset_probe] connector 114 enabled? yes

<7> [105.493346] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [105.493363] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 114

<7> [105.493370] [drm:drm_client_modeset_probe] looking for preferred mode on connector 114 0

<7> [105.493377] [drm:drm_client_modeset_probe] found mode 1024x768

<7> [105.493383] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [105.493433] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [105.493443] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [105.493760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [105.494497] [drm:drm_client_modeset_probe] desired mode 1024x768 set on crtc 51 (0,0)

<7> [105.494737] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [105.494760] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one

<7> [105.497673] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 1024x768 fb: 0x00180000

<6> [105.499416] fbcon: i915drmfb (fb0) is primary device

<6> [105.500791] Console: switching to colour frame buffer device 128x48

<6> [105.500867] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [105.545211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [105.562415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.562441] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [105.562681] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [105.579074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.579105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [105.579393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [105.579830] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :

<7> [105.579839] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [105.579846] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [105.579852] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [105.579857] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [105.579863] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [105.583709] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:114:HDMI-A-1] EDID override set

<7> [105.583755] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [105.583766] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [105.584126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [105.585217] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD monitor IGT

<7> [105.585227] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD size 24, SAD count 0

<7> [105.636354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [105.652826] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [105.652848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [105.653262] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [105.653276] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE

<7> [105.653289] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [105.653299] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE

<7> [105.653311] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :

<7> [105.653319] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa

<7> [105.653328] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [105.653336] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [105.653345] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [105.653352] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [105.653614] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:114:HDMI-A-1] EDID override reset

<7> [105.653762] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [105.653772] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [105.654105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [105.705352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [105.725223] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.725252] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [105.725579] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [105.745452] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.745472] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [105.745796] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:114:HDMI-A-1] EDID changed, epoch counter 2

<7> [105.745822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [105.746363] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa

<7> [105.746377] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE

<7> [105.746389] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [105.746399] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE

<7> [105.746411] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :

<7> [105.746420] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [105.746429] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [105.746438] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [105.746447] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [105.746456] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [105.746787] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 2 to 0 or reprobing

<7> [105.746798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [105.746811] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [105.747180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [105.798356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [105.817062] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.817075] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [105.817368] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [105.836215] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.836223] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [105.836403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [105.836604] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from connected to disconnected

<7> [105.836622] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<7> [105.836874] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [105.836881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [105.837109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [105.888353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [105.906010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.906024] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [105.906354] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [105.925262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [105.925269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [105.925448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [105.925649] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<6> [105.925798] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS

<7> [105.925974] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [105.926708] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:DP-1] EDID override reset

<7> [105.926751] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [105.926761] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [105.927087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [105.927770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [105.928415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [105.929070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [105.930021] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2

<7> [105.930425] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms

<7> [105.931200] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.932923] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.934590] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.936123] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.937925] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.939727] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.941495] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.943401] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.945034] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [105.945911] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON

<7> [105.946810] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04

<7> [105.947375] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000

<7> [105.947861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [105.948221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [105.948440] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [105.948643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [105.949314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [105.949614] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [105.949786] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:108:DP-2] EDID override reset

<7> [105.949825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]

<7> [105.949835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]

<7> [105.950026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [105.950590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [105.950842] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected

<7> [105.951040] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing

<7> [105.951048] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [105.951058] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [105.951287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [106.002350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [106.021073] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [106.021087] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [106.021437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [106.040277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [106.040285] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [106.040465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [106.040667] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<7> [106.040738] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [106.040745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [106.040925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [106.092355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [106.110611] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [106.110626] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [106.110938] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [106.130820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [106.130831] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [106.131187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [106.131558] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<7> [106.131801] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:114:HDMI-A-1] EDID override reset

<7> [106.131846] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [106.131858] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [106.132212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [106.183352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [106.202105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [106.202117] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [106.202421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [106.221309] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [106.221316] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [106.221493] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [106.221696] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<6> [106.222195] [IGT] kms_force_connector_basic: exiting, ret=0

<7> [106.222450] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing

<7> [106.222460] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [106.222472] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [106.222798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [106.274371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [106.294265] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [106.294280] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [106.294570] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [106.313249] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [106.313258] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [106.313458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [106.313688] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<7> [106.314522] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:114:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36)

<7> [106.314809] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [106.315074] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [106.315312] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:107:DDI C/PHY C] [CRTC:51:pipe A]

<7> [106.315519] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [106.315730] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [106.315918] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [106.316104] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [106.316399] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [106.316634] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [106.316840] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1024)

<7> [106.317040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 1344)

<7> [106.317252] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1024)

<7> [106.317532] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 1344)

<7> [106.317770] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1048)

<7> [106.317983] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 1184)

<7> [106.318223] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 768)

<7> [106.318451] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 806)

<7> [106.318638] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 768)

<7> [106.318918] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 806)

<7> [106.319106] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 771)

<7> [106.319341] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 777)

<7> [106.319579] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1024)

<7> [106.319767] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 1344)

<7> [106.319954] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1024)

<7> [106.320180] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 1344)

<7> [106.320460] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1048)

<7> [106.320781] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 1184)

<7> [106.321100] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 768)

<7> [106.321443] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 806)

<7> [106.321764] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 768)

<7> [106.322083] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 806)

<7> [106.322422] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 771)

<7> [106.322741] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 777)

<7> [106.323059] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [106.323402] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [106.323721] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [106.324040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000021)

<7> [106.324383] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.cfgcr1 (expected 0x00000000, found 0x802aab7b)

<7> [106.324704] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.cfgcr2 (expected 0x00000000, found 0x000007a4)

<7> [106.325023] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [106.325412] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 64999)

<7> [106.325734] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 64999)

<7> [106.326053] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 64999)

<7> [106.326392] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [106.326763] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [106.327102] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 860), size 0 -> 860

<7> [106.327424] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 860 - 892), size 0 -> 32

<7> [106.327725] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [106.328026] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 2, 2, 2, 4, 4, 5, 5, 0, 0, 0

<7> [106.328347] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 14, 19, 20, 37, 38, 47, 47, 0, 0, 0

<7> [106.328649] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 15, 20, 21, 38, 39, 48, 48, 0, 0, 0

<7> [106.328987] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (64999 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz)

<7> [106.329327] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (4063 kHz) > old min cdclk (0 kHz)

<7> [106.329654] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [106.329975] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [106.330312] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 1

<7> [106.330628] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 1

<7> [106.330945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset]

<7> [106.331281] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [106.331600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [106.331920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [106.332257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [106.332573] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [106.332893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [106.333230] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [106.333547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [106.333865] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [106.334205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [106.334523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [106.334844] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64999, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa

<7> [106.335184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1024x768": 60 64999 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [106.335504] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64999, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa

<7> [106.335823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 64999, pipe src: 1024x768+0+0, pixel rate 64999

<7> [106.336159] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 166, ips linetime: 0

<7> [106.336478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [106.336796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [106.337116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [106.337455] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x802aab7b, cfgcr2: 0x7a4

<7> [106.337768] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [106.338089] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [106.338427] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [106.338745] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [106.339062] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [106.339400] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [106.339716] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [106.340034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:118] 1024x768 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [106.340372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [106.340690] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1024.000000x768.000000+0.000000+0.000000 dst: 1024x768+0+0

<7> [106.341010] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [106.341395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [106.342535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [106.342788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [106.343366] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [106.344110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [106.344548] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B]

<7> [106.344807] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:96:DP-MST A]

<7> [106.345017] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:97:DP-MST B]

<7> [106.345244] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:98:DP-MST C]

<7> [106.345450] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI C/PHY C]

<7> [106.345630] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A]

<7> [106.345806] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B]

<7> [106.346063] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C]

<7> [106.346282] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [106.346584] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [106.346806] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [106.346997] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [106.347417] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 0x1, on? 0) for [CRTC:51:pipe A]

<7> [106.347652] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1

<7> [106.348349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [106.348655] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [106.350728] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 6291456 bytes of contiguous stolen space for FBC, limit: 1

<7> [106.350958] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]

<7> [106.366657] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [106.366948] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [106.367509] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [106.367995] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]

<7> [106.368009] [drm:drm_client_modeset_probe]

<7> [106.368326] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [106.368371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [106.369485] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2

<7> [106.369734] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms

<7> [106.370725] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [106.372348] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [106.373965] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [106.375588] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [106.377348] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [106.379169] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [106.380977] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [106.382765] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [106.384388] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [106.385298] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON

<7> [106.386187] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04

<7> [106.386863] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000

<7> [106.387560] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [106.387571] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]

<7> [106.387578] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]

<7> [106.387888] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected

<7> [106.387894] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [106.387900] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [106.439375] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [106.442762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [106.442773] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [106.443006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [106.446276] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [106.446284] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [106.446521] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<7> [106.446529] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [106.446557] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [106.446562] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [106.446566] [drm:drm_client_modeset_probe] connector 114 enabled? no

<7> [106.446812] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [106.446845] [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config

<7> [106.447583] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [106.447889] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [106.448287] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [106.448590] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [106.448868] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [106.449121] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [106.449489] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1024, found 0)

<7> [106.449868] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 1344, found 0)

<7> [106.450199] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1024, found 0)

<7> [106.450478] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 1344, found 0)

<7> [106.450732] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1048, found 0)

<7> [106.451118] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 1184, found 0)

<7> [106.451428] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 768, found 0)

<7> [106.451703] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 806, found 0)

<7> [106.451974] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 768, found 0)

<7> [106.452272] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 806, found 0)

<7> [106.452554] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 771, found 0)

<7> [106.452851] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 777, found 0)

<7> [106.453106] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1024, found 0)

<7> [106.453398] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 1344, found 0)

<7> [106.453676] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1024, found 0)

<7> [106.453928] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 1344, found 0)

<7> [106.454369] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1048, found 0)

<7> [106.454718] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 1184, found 0)

<7> [106.454973] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 768, found 0)

<7> [106.455258] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 806, found 0)

<7> [106.455535] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 768, found 0)

<7> [106.455944] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 806, found 0)

<7> [106.456278] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 771, found 0)

<7> [106.456554] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 777, found 0)

<7> [106.456809] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [106.457118] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [106.457561] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [106.457907] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [106.458199] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 64999, found 0)

<7> [106.458507] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 64999, found 0)

<7> [106.458760] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 64999, found 0)

<7> [106.459082] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [106.459512] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 1

<7> [106.459872] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [106.460172] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 860) -> ( 0 - 0), size 860 -> 0

<7> [106.460465] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 860 - 892) -> ( 0 - 0), size 32 -> 0

<7> [106.460789] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [106.461164] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 2, 2, 2, 4, 4, 5, 5, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [106.461482] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 5, 14, 19, 20, 37, 38, 47, 47, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [106.461721] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 6, 15, 20, 21, 38, 39, 48, 48, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [106.461995] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [106.462428] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [106.462763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset]

<7> [106.463017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [106.463310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [106.463585] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [106.464886] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [106.466907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [106.467280] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 0x1, on? 1) for [CRTC:51:pipe A]

<7> [106.467615] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1

<7> [106.467876] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]

<7> [106.468162] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B]

<7> [106.468554] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:96:DP-MST A]

<7> [106.468823] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:97:DP-MST B]

<7> [106.469061] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:98:DP-MST C]

<7> [106.469433] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI C/PHY C]

<7> [106.469767] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A]

<7> [106.470170] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B]

<7> [106.470474] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C]

<7> [106.470715] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [106.470984] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [106.471415] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [106.471797] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [106.472078] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [106.472515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [106.472974] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [106.477251] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

Results for igt@kms_force_connector_basic@force-edid