Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.28-g042dfe090 (x86_64) (Linux: 6.6.0-rc7-linus-v6.6-rc7-g05d3ef8bba77+ x86_64)
Out 
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.030s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.030s)
Dmesg
<6> [255.468137] Console: switching to colour dummy device 80x25
<6> [255.468371] [IGT] kms_force_connector_basic: executing
<7> [255.470257] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [255.470685] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [255.470836] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [255.471272] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [255.471278] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [255.471297] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [255.471459] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [255.471479] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [255.471483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [255.471619] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [255.471665] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [255.471669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [255.471802] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<6> [255.471966] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [255.472045] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [255.472049] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [255.472053] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [255.472486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [255.472609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [255.473007] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [255.473111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [255.473120] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.473236] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [255.480700] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [255.480707] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [255.480788] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] status updated from disconnected to connected
<7> [255.480818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [255.480821] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [255.480825] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [255.480828] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [255.480830] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [255.480833] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [255.480854] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [255.480858] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [255.481397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [255.481579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [255.482064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [255.482221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [255.482234] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.482360] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [255.489606] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [255.489615] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [255.489766] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [255.489770] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [255.489775] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [255.489778] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [255.489781] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [255.489784] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [255.489901] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:245:HDMI-A-1] EDID override set
<7> [255.489914] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [255.489917] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [255.490022] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:245:HDMI-A-1] ELD monitor IGT
<7> [255.490025] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:245:HDMI-A-1] ELD size 24, SAD count 0
<7> [255.490379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [255.490496] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [255.490925] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [255.491053] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [255.491112] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [255.491116] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [255.491120] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [255.491122] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [255.491126] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [255.491128] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [255.491131] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [255.491134] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [255.491136] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [255.491139] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [255.491141] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [255.491273] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:245:HDMI-A-1] EDID override set
<7> [255.491295] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [255.491300] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [255.491424] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:245:HDMI-A-1] ELD monitor IGT
<7> [255.491427] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:245:HDMI-A-1] ELD size 24, SAD count 0
<7> [255.491430] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:245:HDMI-A-1] EDID changed, epoch counter 4
<7> [255.491771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [255.491862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [255.492282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [255.492404] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [255.492476] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [255.492480] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [255.492483] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [255.492486] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [255.492488] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [255.492491] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [255.492494] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [255.492496] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [255.492565] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:245:HDMI-A-1] EDID override reset
<7> [255.492580] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [255.492582] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [255.493013] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [255.493112] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [255.493547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [255.493643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [255.493651] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.493748] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [255.500894] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [255.500901] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [255.501005] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:245:HDMI-A-1] EDID changed, epoch counter 5
<7> [255.501040] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [255.501044] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [255.501048] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [255.501051] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [255.501055] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [255.501058] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [255.501061] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [255.501064] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [255.501066] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [255.501069] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [255.501202] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [255.501206] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [255.501210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [255.501342] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] status updated from connected to disconnected
<7> [255.501355] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [255.501444] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [255.501447] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [255.501577] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<6> [255.501818] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [255.501898] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [255.502277] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing
<7> [255.502282] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [255.502286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [255.503179] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [255.503330] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [255.504037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [255.504241] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [255.504359] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [255.504459] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [255.504568] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [255.504573] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [255.504577] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [255.504580] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [255.504592] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [255.504687] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [255.505549] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [255.505654] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [255.506340] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [255.506344] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [255.506348] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [255.506372] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [255.506375] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [255.507166] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [255.507265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [255.507860] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [255.507950] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [255.508041] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [255.508127] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [255.508237] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [255.508241] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [255.508244] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [255.508247] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [255.508255] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [255.508340] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [255.509101] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [255.509220] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [255.509863] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [255.509866] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [255.509870] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [255.509945] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:eDP-1] EDID override reset
<7> [255.509958] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [255.509962] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [255.510761] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [255.510854] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [255.511423] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [255.511511] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [255.511597] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [255.511686] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [255.511784] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [255.511787] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [255.511790] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [255.511793] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [255.511801] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [255.511886] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [255.512650] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [255.512743] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [255.513386] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [255.513390] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [255.513393] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [255.513491] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [255.513494] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [255.513499] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [255.513635] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [255.513654] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [255.513657] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [255.513770] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [255.513820] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:245:HDMI-A-1] EDID override reset
<7> [255.513831] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [255.513834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [255.513946] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [255.514001] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:254:DP-1] EDID override reset
<7> [255.514011] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:254:DP-1]
<7> [255.514013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:254:DP-1]
<7> [255.514135] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:254:DP-1] disconnected
<7> [255.514199] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:264:DP-2] EDID override reset
<7> [255.514209] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-2]
<7> [255.514212] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-2]
<7> [255.543154] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.572153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.601153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.630152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.659153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.688152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.717152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.746152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.775153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.804152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.830152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.859153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.888153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.917152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.946153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [255.975153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.004152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.033152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.062153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.091154] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.120152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.149152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.178153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.207153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.236152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.265152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.294152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.323153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.352152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.381152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.410152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.439155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.439278] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [256.439290] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-2] disconnected
<7> [256.439390] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:273:DP-3] EDID override reset
<7> [256.439405] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-3]
<7> [256.439409] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-3]
<7> [256.439566] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-3] disconnected
<7> [256.439627] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:282:DP-4] EDID override reset
<7> [256.439637] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-4]
<7> [256.439640] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-4]
<7> [256.439771] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-4] disconnected
<6> [256.440135] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [256.440244] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [256.440248] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [256.440252] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [256.440376] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [256.440404] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing
<7> [256.440407] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [256.440411] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [256.441180] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [256.441277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [256.441889] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [256.441978] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [256.442065] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [256.442160] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [256.442262] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [256.442267] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [256.442270] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [256.442273] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [256.442283] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [256.442373] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [256.443169] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [256.443262] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [256.443918] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [256.443922] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [256.443926] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [256.444051] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [256.463958] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [256.463963] [drm:drm_client_modeset_probe]
<7> [256.463992] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [256.463996] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [256.464817] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [256.465009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [256.465885] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [256.465976] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [256.466065] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [256.466164] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [256.466286] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [256.466300] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [256.466310] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [256.466319] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [256.466348] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [256.466626] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [256.467419] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [256.467583] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [256.468628] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [256.468639] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [256.468650] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [256.468660] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [256.468671] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [256.468994] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [256.469006] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:254:DP-1]
<7> [256.469016] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:254:DP-1]
<7> [256.469325] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:254:DP-1] disconnected
<7> [256.469330] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-2]
<7> [256.469334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-2]
<7> [256.496157] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.525153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.554153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.583153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.612153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.641154] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.670155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.699153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.726693] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.755152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.784153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.813154] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.842154] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.871153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.900153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.929154] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.958152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [256.987152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.016152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.045154] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.074155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.103153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.132153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.161154] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.190154] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.219153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.248152] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.277154] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.306153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.335157] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.364153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.393153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.393278] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [257.393291] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-2] disconnected
<7> [257.393296] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-3]
<7> [257.393300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-3]
<7> [257.393441] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-3] disconnected
<7> [257.393445] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-4]
<7> [257.393448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-4]
<7> [257.393578] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-4] disconnected
<7> [257.393581] [drm:drm_client_modeset_probe] connector 236 enabled? yes
<7> [257.393585] [drm:drm_client_modeset_probe] connector 245 enabled? no
<7> [257.393587] [drm:drm_client_modeset_probe] connector 254 enabled? no
<7> [257.393589] [drm:drm_client_modeset_probe] connector 264 enabled? no
<7> [257.393591] [drm:drm_client_modeset_probe] connector 273 enabled? no
<7> [257.393592] [drm:drm_client_modeset_probe] connector 282 enabled? no
<7> [257.393615] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [257.393625] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236
<7> [257.393627] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0
<7> [257.393630] [drm:drm_client_modeset_probe] found mode 3840x2160
<7> [257.393632] [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [257.393647] [drm:drm_client_modeset_probe] desired mode 3840x2160 set on crtc 80 (0,0)
<6> [257.430617] Console: switching to colour frame buffer device 480x135
Created at 2023-10-23 14:17:54