igt@i915_selftest@live@gt_tlb on fi-skl-6600u@linus-v6.6-rc6 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-g08e87a32f (x86_64) (Linux: 6.6.0-rc6-linus-v6.6-rc6-g58720809f527+ x86_64)
Out	Starting dynamic subtest: gt_tlb Dynamic subtest gt_tlb: SUCCESS (2.717s)
Err	Starting dynamic subtest: gt_tlb Dynamic subtest gt_tlb: SUCCESS (2.717s)
Dmesg	<6> [330.328766] [IGT] i915_selftest: starting dynamic subtest gt_tlb <5> [330.487217] Setting dangerous option live_selftests - tainting kernel <7> [330.555822] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [330.556153] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [330.556414] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [330.556642] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [330.557031] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [330.557244] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [330.558191] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [330.558379] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [330.558605] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [330.558876] i915 0000:00:02.0: vgaarb: deactivate vga console <7> [330.559183] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [330.559414] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [330.559961] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [330.560220] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [330.560426] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [330.560630] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [330.560897] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [330.570808] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [330.571128] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [330.571327] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [330.571523] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [330.571723] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: LPDDR3 <7> [330.571902] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb DIMMs: no <7> [330.572121] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [330.572268] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb DIMMs: no <7> [330.572411] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb DIMMs: no <7> [330.572551] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [330.572691] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb DIMMs: no <7> [330.572884] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [330.573079] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [330.573221] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [330.573815] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [330.574102] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [330.574378] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [330.574613] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [330.574872] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [330.575132] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [330.575355] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [330.575573] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [330.575808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [330.576049] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [330.576267] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [330.576484] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [330.576694] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [330.577030] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [330.577268] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [330.577521] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [330.577756] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [330.578002] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [330.578231] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [330.578444] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [330.578655] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [330.578894] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [330.579124] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [330.579337] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [330.579562] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [330.579855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [330.580189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [330.580446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [330.580684] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [330.580932] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [330.581161] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [330.581375] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [330.581678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [330.581917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [330.582144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [330.582370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [330.582741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [330.582997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [330.583260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [330.583476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [330.583734] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [330.584475] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [330.585051] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [330.585336] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [330.585543] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [330.585758] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <6> [330.587484] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [330.587532] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [330.587753] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [330.588063] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [330.588350] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [330.588638] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [330.588949] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [330.592226] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [330.594702] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [330.595090] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [330.595413] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [330.603844] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [330.604079] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [330.604298] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [330.604511] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [330.604734] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [330.604978] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [330.605255] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [330.605469] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [330.605680] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [330.606154] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [330.606456] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [330.606756] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [330.607029] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [330.607278] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [330.607494] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [330.607684] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [330.607949] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [330.608457] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [330.608680] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [330.608980] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [330.609219] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [330.609482] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [330.609763] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [330.822147] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [330.823479] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [330.825018] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 <7> [330.827426] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [330.844322] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [330.844380] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [330.844417] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [330.844992] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:95:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [330.846557] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:95:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [330.847925] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:95:eDP-1] DRRS type: static <7> [330.849898] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:95:eDP-1] Using native PCH PWM for backlight control <7> [330.851509] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:95:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [330.853504] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [330.854944] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [330.856585] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [330.858063] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [330.859332] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [330.860933] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [330.863676] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:102:DDI B/PHY B] Using AUX CH B (VBT) <7> [330.864450] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:102:DDI B/PHY B] <7> [330.866640] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [330.867500] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:102:DDI B/PHY B] <7> [330.868464] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:102:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [330.870119] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI C/PHY C] Using AUX CH C (VBT) <7> [330.870850] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI C/PHY C] <7> [330.871956] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [330.872555] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI C/PHY C] <7> [330.873306] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [330.875361] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [330.876054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [330.876557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [330.877001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [330.877528] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [330.878105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [330.878631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [330.879203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [330.879729] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [330.880168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [330.880598] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [330.881072] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [330.881594] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI A/PHY A] hw state readout: disabled, pipe A <7> [330.882168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:102:DDI B/PHY B] hw state readout: disabled, pipe A <7> [330.882665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DP-MST A] hw state readout: disabled, pipe A <7> [330.883200] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DP-MST B] hw state readout: disabled, pipe B <7> [330.883656] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP-MST C] hw state readout: disabled, pipe C <7> [330.884209] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI C/PHY C] hw state readout: disabled, pipe A <7> [330.884594] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A <7> [330.884943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B <7> [330.885284] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C <7> [330.885583] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [330.885947] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [330.886304] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [330.886608] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [330.887070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:eDP-1] hw state readout: disabled <7> [330.887486] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:103:DP-1] hw state readout: disabled <7> [330.887833] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:112:HDMI-A-1] hw state readout: disabled <7> [330.888195] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-2] hw state readout: disabled <7> [330.888502] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:124:HDMI-A-2] hw state readout: disabled <7> [330.888783] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [330.889112] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [330.889458] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [330.889739] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [330.890098] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [330.890474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [330.890756] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [330.891115] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [330.891540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [330.891972] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [330.892371] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [330.892728] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [330.893245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [330.893545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [330.893820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [330.894139] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [330.894487] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [330.894860] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [330.895198] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [330.895632] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [330.895896] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [330.896165] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [330.896408] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7> [330.898757] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [330.899065] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [330.899406] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0 <7> [330.917732] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [330.918092] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [330.918317] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [330.918488] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [330.919118] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [330.919504] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [330.919712] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [330.919941] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [330.920181] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [330.920411] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [330.928313] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:95:eDP-1] backlight device intel_backlight registered <7> [330.928852] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [330.931867] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:eDP-1] generating connector hotplug event <7> [330.932659] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [330.934110] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:103:DP-1] generating connector hotplug event <7> [330.934964] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:112:HDMI-A-1] generating connector hotplug event <7> [330.935565] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [330.936972] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-2] generating connector hotplug event <7> [330.937726] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:124:HDMI-A-2] generating connector hotplug event <6> [330.937827] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [330.941636] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [330.967822] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [330.975704] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input45 <7> [330.976831] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [330.978138] [drm:drm_client_modeset_probe] <7> [330.978220] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] <7> [330.978144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [330.978236] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [330.978559] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] status updated from unknown to disconnected <7> [330.978583] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] disconnected <7> [330.978594] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:95:eDP-1] EDID changed, epoch counter 2 <7> [330.978619] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] <7> [330.978533] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [330.978631] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [330.978902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [330.979204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [330.979770] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] status updated from unknown to disconnected <7> [330.979808] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected <7> [330.979821] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] <7> [330.979833] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-1] <7> [330.980129] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] status updated from unknown to disconnected <7> [330.980150] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] disconnected <7> [330.980161] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] <7> [330.980172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-2] <7> [330.980475] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] status updated from unknown to disconnected <7> [330.980493] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] disconnected <7> [330.980504] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] <7> [330.980355] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [330.980514] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:124:HDMI-A-2] <7> [330.980685] i915 device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [330.980692] i915 device info: graphics version: 9 <7> [330.980695] i915 device info: media version: 9 <7> [330.980699] i915 device info: graphics stepping: H0 <7> [330.980702] i915 device info: media stepping: H0 <7> [330.980706] i915 device info: display stepping: H0 <7> [330.980709] i915 device info: base die stepping: ** <7> [330.980712] i915 device info: gt: 2 <7> [330.980716] i915 device info: memory-regions: 0x21 <7> [330.980719] i915 device info: page-sizes: 0x11000 <7> [330.980722] i915 device info: platform: SKYLAKE <7> [330.980726] i915 device info: ppgtt-size: 48 <7> [330.980729] i915 device info: ppgtt-type: 2 <7> [330.980732] i915 device info: dma_mask_size: 39 <7> [330.980736] i915 device info: is_mobile: no <7> [330.980739] i915 device info: is_lp: no <7> [330.980743] i915 device info: require_force_probe: no <7> [330.980746] i915 device info: is_dgfx: no <7> [330.980749] i915 device info: has_64bit_reloc: yes <7> [330.980753] i915 device info: has_64k_pages: no <7> [330.980756] i915 device info: gpu_reset_clobbers_display: no <7> [330.980760] i915 device info: has_reset_engine: yes <7> [330.980763] i915 device info: has_3d_pipeline: yes <7> [330.980767] i915 device info: has_4tile: no <7> [330.980770] i915 device info: has_flat_ccs: no <7> [330.980773] i915 device info: has_global_mocs: no <7> [330.980777] i915 device info: has_gmd_id: no <7> [330.980780] i915 device info: has_gt_uc: yes <7> [330.980784] i915 device info: has_heci_pxp: no <7> [330.980802] i915 device info: has_heci_gscfi: no <7> [330.980805] i915 device info: has_guc_deprivilege: no <7> [330.980830] i915 device info: has_l3_ccs_read: no <7> [330.980834] i915 device info: has_l3_dpf: no <7> [330.980839] i915 device info: has_llc: yes <7> [330.980843] i915 device info: has_logical_ring_contexts: yes <7> [330.980847] i915 device info: has_logical_ring_elsq: no <7> [330.980852] i915 device info: has_media_ratio_mode: no <7> [330.980856] i915 device info: has_mslice_steering: no <7> [330.980861] i915 device info: has_oa_bpc_reporting: no <7> [330.980865] i915 device info: has_oa_slice_contrib_limits: no <7> [330.980870] i915 device info: has_oam: no <7> [330.980874] i915 device info: has_one_eu_per_fuse_bit: no <7> [330.980878] i915 device info: has_pxp: no <7> [330.980883] i915 device info: has_rc6: yes <7> [330.980887] i915 device info: has_rc6p: no <7> [330.980891] i915 device info: has_rps: yes <7> [330.980895] i915 device info: has_runtime_pm: yes <7> [330.980900] i915 device info: has_snoop: no <7> [330.980904] i915 device info: has_coherent_ggtt: yes <7> [330.980909] i915 device info: tuning_thread_rr_after_dep: no <7> [330.980913] i915 device info: unfenced_needs_alignment: no <7> [330.980917] i915 device info: hws_needs_physical: no <7> [330.980922] i915 device info: has_pooled_eu: no <7> [330.980926] i915 device info: rawclk rate: 24000 kHz <7> [330.980931] i915 device info: display version: 9 <7> [330.980936] i915 device info: cursor_needs_physical: no <7> [330.980940] i915 device info: has_cdclk_crawl: no <7> [330.980944] i915 device info: has_cdclk_squash: no <7> [330.980949] i915 device info: has_ddi: yes <7> [330.980953] i915 device info: has_dp_mst: yes <7> [330.980957] i915 device info: has_dsb: no <7> [330.980962] i915 device info: has_fpga_dbg: yes <7> [330.980966] i915 device info: has_gmch: no <7> [330.980970] i915 device info: has_hotplug: yes <7> [330.980975] i915 device info: has_hti: no <7> [330.980979] i915 device info: has_ipc: yes <7> [330.980983] i915 device info: has_overlay: no <7> [330.980988] i915 device info: has_psr: yes <7> [330.980992] i915 device info: has_psr_hw_tracking: yes <7> [330.980996] i915 device info: overlay_needs_physical: no <7> [330.981001] i915 device info: supports_tv: no <7> [330.981005] i915 device info: has_hdcp: yes <7> [330.981010] i915 device info: has_dmc: yes <7> [330.981014] i915 device info: has_dsc: no <7> [330.981018] i915 device info: iommu: disabled <7> [330.981023] i915 device info: available engines: 40403 <7> [330.981028] i915 device info: slice total: 1, mask=0001 <7> [330.981033] i915 device info: subslice total: 3 <7> [330.981037] i915 device info: slice0: 3 subslices, mask=00000007 <7> [330.981041] i915 device info: slice1: 0 subslices, mask=00000000 <7> [330.981045] i915 device info: slice2: 0 subslices, mask=00000000 <7> [330.981049] i915 device info: EU total: 24 <7> [330.981053] i915 device info: EU per subslice: 8 <7> [330.981057] i915 device info: has slice power gating: no <7> [330.981061] i915 device info: has subslice power gating: no <7> [330.981065] i915 device info: has EU power gating: yes <6> [330.981070] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [330.981074] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [330.981079] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [330.981085] i915: Performing live selftests with st_random_seed=0x297e68f1 st_timeout=500 <6> [330.981091] i915: Running gt_tlb <6> [330.981130] i915: Running intel_tlb_live_selftests/invalidate_full <4> [330.981440] Failed to allocate contiguous pages for size 400000 <7> [330.983376] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] status updated from unknown to disconnected <7> [330.983404] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] disconnected <7> [330.983415] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [330.983424] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [330.983431] [drm:drm_client_modeset_probe] connector 103 enabled? no <7> [330.983437] [drm:drm_client_modeset_probe] connector 112 enabled? no <7> [330.983444] [drm:drm_client_modeset_probe] connector 118 enabled? no <7> [330.983450] [drm:drm_client_modeset_probe] connector 124 enabled? no <7> [330.983517] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [330.983536] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [330.983572] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [330.983591] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [330.986435] [drm:drm_client_modeset_probe] <7> [330.986492] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] <7> [330.986503] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [330.986755] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] disconnected <7> [330.986765] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] <7> [330.986773] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [330.987034] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected <7> [330.987045] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] <7> [330.987055] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-1] <7> [330.987316] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] disconnected <7> [330.987324] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] <7> [330.987333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-2] <7> [330.987597] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] disconnected <7> [330.987608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] <7> [330.987619] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:124:HDMI-A-2] <7> [330.987939] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] disconnected <7> [330.987950] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [330.987959] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [330.987966] [drm:drm_client_modeset_probe] connector 103 enabled? no <7> [330.987974] [drm:drm_client_modeset_probe] connector 112 enabled? no <7> [330.987981] [drm:drm_client_modeset_probe] connector 118 enabled? no <7> [330.987988] [drm:drm_client_modeset_probe] connector 124 enabled? no <7> [330.988047] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [330.988066] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [330.988098] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [330.988116] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [330.988235] [drm:drm_client_modeset_probe] <7> [330.988308] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] <7> [330.988320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [330.988616] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] disconnected <7> [330.988627] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] <7> [330.988639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [330.989392] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected <7> [330.989405] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] <7> [330.989417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-1] <7> [330.989713] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] disconnected <7> [330.989724] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] <7> [330.989735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-2] <7> [330.990232] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] disconnected <7> [330.990245] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] <7> [330.990257] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:124:HDMI-A-2] <7> [330.990548] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] disconnected <7> [330.990558] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [330.990566] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [330.990574] [drm:drm_client_modeset_probe] connector 103 enabled? no <7> [330.990581] [drm:drm_client_modeset_probe] connector 112 enabled? no <7> [330.990588] [drm:drm_client_modeset_probe] connector 118 enabled? no <7> [330.990594] [drm:drm_client_modeset_probe] connector 124 enabled? no <7> [330.990656] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [330.990674] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [330.990705] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [330.990722] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [331.001576] rcs0((efault)): Sampling bce612451dc8, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:bce612451dc8+4 <6> [331.015028] rcs0((efault)): Sampling 9ecab1a72ac8, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:9ecab1a72ac0+10 <6> [331.029545] rcs0((efault)): Sampling 7a4d4c085808, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:7a4d4c085800+100 <6> [331.044484] rcs0((efault)): Sampling af73a152ded8, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:af73a1520000+10000 <6> [331.058498] rcs0((efault)): Sampling 90ebe946a38, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:90e00000000+100000000 <6> [331.071426] rcs0((efault)): Sampling 3f40e22bde28, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:0+1000000000000 <7> [331.083841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <6> [331.098055] rcs0((efault)): Sampling 6c4a6a002d68, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:6c4a6a002d68+4 <6> [331.112053] rcs0((efault)): Sampling f7b6b6e02620, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:f7b6b6e02620+10 <6> [331.125406] rcs0((efault)): Sampling 598783c07648, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:598783c07600+100 <6> [331.138191] rcs0((efault)): Sampling 18053b403528, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:18053b400000+10000 <6> [331.151346] rcs0((efault)): Sampling 17e60820db68, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:17e600000000+100000000 <6> [331.164910] rcs0((efault)): Sampling a21618008678, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:0+1000000000000 <6> [331.196410] bcs0((efault)): Sampling 3dc25e145e28, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:3dc25e145e28+4 <6> [331.216106] bcs0((efault)): Sampling da3f640e5760, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:da3f640e5760+10 <6> [331.235686] bcs0((efault)): Sampling 8e5e4ef7f7c8, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:8e5e4ef7f700+100 <6> [331.257120] bcs0((efault)): Sampling 3cb9b5fcd8a0, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:3cb9b5fc0000+10000 <6> [331.276763] bcs0((efault)): Sampling 3992e3130f50, with alignment 1000, using PTE size 11000 (phys 100000, sg 11000), invalidate:399200000000+100000000 <6> [331.296786] bcs0((efault)): Sampling 98ecb3b05058, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:0+1000000000000 <6> [331.335487] bcs0((efault)): Sampling eb2479008198, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:eb2479008198+4 <6> [331.355892] bcs0((efault)): Sampling 9f7e07204ca0, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:9f7e07204ca0+10 <6> [331.375166] bcs0((efault)): Sampling 7d4b96c068e8, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:7d4b96c06800+100 <6> [331.393651] bcs0((efault)): Sampling bf9bf300f348, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:bf9bf3000000+10000 <6> [331.412873] bcs0((efault)): Sampling 12922a60fd28, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:129200000000+100000000 <6> [331.432641] bcs0((efault)): Sampling c8f1df80fc78, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:0+1000000000000 <6> [331.474383] vcs0((efault)): Sampling fe4170848b20, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:fe4170848b20+4 <6> [331.494039] vcs0((efault)): Sampling cb88a6496208, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:cb88a6496200+10 <6> [331.513620] vcs0((efault)): Sampling 22b0c850230, with alignment 1000, using PTE size 11000 (phys 100000, sg 11000), invalidate:22b0c850200+100 <6> [331.533902] vcs0((efault)): Sampling c363f00c9658, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:c363f00c0000+10000 <6> [331.553783] vcs0((efault)): Sampling b324f354bd30, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:b32400000000+100000000 <6> [331.574200] vcs0((efault)): Sampling 91fc1b13f450, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:0+1000000000000 <6> [331.614525] vcs0((efault)): Sampling 2af219404638, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:2af219404638+4 <6> [331.635773] vcs0((efault)): Sampling 76af120e6f8, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:76af120e6f0+10 <6> [331.654946] vcs0((efault)): Sampling e59bd700dfc8, with alignment 10000, using PTE size 10000 (phys 100000, sg 11000), invalidate:e59bd700df00+100 <6> [331.674063] vcs0((efault)): Sampling b41478403ab0, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:b41478400000+10000 <6> [331.692880] vcs0((efault)): Sampling 86cbd04034c8, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:86cb00000000+100000000 <6> [331.711170] vcs0((efault)): Sampling 9fb59e00f2e0, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:0+1000000000000 <6> [331.745281] vecs0((efault)): Sampling fd30f736380, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:fd30f736380+4 <6> [331.761691] vecs0((efault)): Sampling 135d12cbdd8, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:135d12cbdd0+10 <6> [331.778590] vecs0((efault)): Sampling 6b67112ab110, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:6b67112ab100+100 <6> [331.794634] vecs0((efault)): Sampling 98553137f6b8, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:985531370000+10000 <6> [331.810644] vecs0((efault)): Sampling 5803a7246998, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:580300000000+100000000 <6> [331.826625] vecs0((efault)): Sampling 77262177e340, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:0+1000000000000 <6> [331.860346] vecs0((efault)): Sampling 2e717700d0f8, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:2e717700d0f8+4 <6> [331.878675] vecs0((efault)): Sampling a6c84740a398, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:a6c84740a390+10 <6> [331.898313] vecs0((efault)): Sampling 4da8d3a05bf0, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:4da8d3a05b00+100 <6> [331.917326] vecs0((efault)): Sampling 9b88f360fc38, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:9b88f3600000+10000 <6> [331.935304] vecs0((efault)): Sampling 499940e0a310, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:499900000000+100000000 <6> [331.953302] vecs0((efault)): Sampling 94a1c3e05ae0, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:0+1000000000000 <7> [331.990998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [331.991660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [331.992193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [331.992739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [331.993234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [332.032490] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [332.113106] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <7> [332.113849] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [332.114335] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [332.114714] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [332.747331] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [332.748744] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <4> [332.789031] i915: probe of 0000:00:02.0 failed with error -25 <6> [333.046832] [IGT] i915_selftest: finished subtest gt_tlb, SUCCESS

<6> [330.328766] [IGT] i915_selftest: starting dynamic subtest gt_tlb

<5> [330.487217] Setting dangerous option live_selftests - tainting kernel

<7> [330.555822] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [330.556153] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [330.556414] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [330.556642] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [330.557031] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [330.557244] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [330.558191] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [330.558379] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [330.558605] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [330.558876] i915 0000:00:02.0: vgaarb: deactivate vga console

<7> [330.559183] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [330.559414] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [330.559961] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [330.560220] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [330.560426] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [330.560630] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [330.560897] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [330.570808] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [330.571128] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [330.571327] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [330.571523] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [330.571723] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: LPDDR3

<7> [330.571902] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb DIMMs: no

<7> [330.572121] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [330.572268] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb DIMMs: no

<7> [330.572411] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb DIMMs: no

<7> [330.572551] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [330.572691] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb DIMMs: no

<7> [330.572884] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [330.573079] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [330.573221] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [330.573815] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [330.574102] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [330.574378] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [330.574613] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [330.574872] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [330.575132] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [330.575355] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [330.575573] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [330.575808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [330.576049] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [330.576267] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [330.576484] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [330.576694] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [330.577030] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [330.577268] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [330.577521] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [330.577756] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [330.578002] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [330.578231] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [330.578444] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [330.578655] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [330.578894] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [330.579124] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [330.579337] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [330.579562] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [330.579855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [330.580189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [330.580446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [330.580684] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [330.580932] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [330.581161] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [330.581375] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [330.581678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [330.581917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [330.582144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [330.582370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [330.582741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [330.582997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [330.583260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [330.583476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [330.583734] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [330.584475] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [330.585051] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [330.585336] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [330.585543] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [330.585758] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<6> [330.587484] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [330.587532] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [330.587753] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [330.588063] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [330.588350] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [330.588638] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [330.588949] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [330.592226] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [330.594702] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [330.595090] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [330.595413] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [330.603844] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [330.604079] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [330.604298] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [330.604511] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [330.604734] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [330.604978] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [330.605255] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [330.605469] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [330.605680] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [330.606154] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [330.606456] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [330.606756] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [330.607029] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [330.607278] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [330.607494] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [330.607684] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [330.607949] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [330.608457] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [330.608680] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [330.608980] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [330.609219] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [330.609482] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [330.609763] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [330.822147] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [330.823479] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [330.825018] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40

<7> [330.827426] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [330.844322] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [330.844380] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [330.844417] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [330.844992] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:95:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [330.846557] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:95:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [330.847925] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:95:eDP-1] DRRS type: static

<7> [330.849898] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:95:eDP-1] Using native PCH PWM for backlight control

<7> [330.851509] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:95:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [330.853504] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [330.854944] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [330.856585] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [330.858063] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [330.859332] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [330.860933] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [330.863676] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:102:DDI B/PHY B] Using AUX CH B (VBT)

<7> [330.864450] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:102:DDI B/PHY B]

<7> [330.866640] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [330.867500] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:102:DDI B/PHY B]

<7> [330.868464] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:102:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [330.870119] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI C/PHY C] Using AUX CH C (VBT)

<7> [330.870850] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI C/PHY C]

<7> [330.871956] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [330.872555] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI C/PHY C]

<7> [330.873306] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [330.875361] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [330.876054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [330.876557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [330.877001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [330.877528] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [330.878105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [330.878631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [330.879203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [330.879729] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [330.880168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [330.880598] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [330.881072] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [330.881594] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [330.882168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:102:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [330.882665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DP-MST A] hw state readout: disabled, pipe A

<7> [330.883200] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DP-MST B] hw state readout: disabled, pipe B

<7> [330.883656] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP-MST C] hw state readout: disabled, pipe C

<7> [330.884209] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [330.884594] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A

<7> [330.884943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B

<7> [330.885284] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C

<7> [330.885583] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [330.885947] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [330.886304] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [330.886608] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [330.887070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:eDP-1] hw state readout: disabled

<7> [330.887486] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:103:DP-1] hw state readout: disabled

<7> [330.887833] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:112:HDMI-A-1] hw state readout: disabled

<7> [330.888195] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-2] hw state readout: disabled

<7> [330.888502] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:124:HDMI-A-2] hw state readout: disabled

<7> [330.888783] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [330.889112] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [330.889458] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [330.889739] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [330.890098] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [330.890474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [330.890756] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [330.891115] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [330.891540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [330.891972] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [330.892371] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [330.892728] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [330.893245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [330.893545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [330.893820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [330.894139] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [330.894487] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [330.894860] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [330.895198] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [330.895632] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [330.895896] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [330.896165] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [330.896408] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global

<7> [330.898757] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [330.899065] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [330.899406] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0

<7> [330.917732] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [330.918092] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [330.918317] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [330.918488] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [330.919118] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [330.919504] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [330.919712] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [330.919941] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [330.920181] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [330.920411] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [330.928313] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:95:eDP-1] backlight device intel_backlight registered

<7> [330.928852] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [330.931867] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:eDP-1] generating connector hotplug event

<7> [330.932659] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [330.934110] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:103:DP-1] generating connector hotplug event

<7> [330.934964] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:112:HDMI-A-1] generating connector hotplug event

<7> [330.935565] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [330.936972] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-2] generating connector hotplug event

<7> [330.937726] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:124:HDMI-A-2] generating connector hotplug event

<6> [330.937827] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [330.941636] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [330.967822] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [330.975704] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input45

<7> [330.976831] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [330.978138] [drm:drm_client_modeset_probe]

<7> [330.978220] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1]

<7> [330.978144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [330.978236] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [330.978559] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] status updated from unknown to disconnected

<7> [330.978583] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] disconnected

<7> [330.978594] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:95:eDP-1] EDID changed, epoch counter 2

<7> [330.978619] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1]

<7> [330.978533] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [330.978631] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [330.978902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [330.979204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [330.979770] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] status updated from unknown to disconnected

<7> [330.979808] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected

<7> [330.979821] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1]

<7> [330.979833] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-1]

<7> [330.980129] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] status updated from unknown to disconnected

<7> [330.980150] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] disconnected

<7> [330.980161] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2]

<7> [330.980172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-2]

<7> [330.980475] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] status updated from unknown to disconnected

<7> [330.980493] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] disconnected

<7> [330.980504] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2]

<7> [330.980355] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [330.980514] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:124:HDMI-A-2]

<7> [330.980685] i915 device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [330.980692] i915 device info: graphics version: 9

<7> [330.980695] i915 device info: media version: 9

<7> [330.980699] i915 device info: graphics stepping: H0

<7> [330.980702] i915 device info: media stepping: H0

<7> [330.980706] i915 device info: display stepping: H0

<7> [330.980709] i915 device info: base die stepping: **

<7> [330.980716] i915 device info: memory-regions: 0x21

<7> [330.980719] i915 device info: page-sizes: 0x11000

<7> [330.980722] i915 device info: platform: SKYLAKE

<7> [330.980726] i915 device info: ppgtt-size: 48

<7> [330.980729] i915 device info: ppgtt-type: 2

<7> [330.980732] i915 device info: dma_mask_size: 39

<7> [330.980736] i915 device info: is_mobile: no

<7> [330.980739] i915 device info: is_lp: no

<7> [330.980743] i915 device info: require_force_probe: no

<7> [330.980746] i915 device info: is_dgfx: no

<7> [330.980749] i915 device info: has_64bit_reloc: yes

<7> [330.980753] i915 device info: has_64k_pages: no

<7> [330.980756] i915 device info: gpu_reset_clobbers_display: no

<7> [330.980760] i915 device info: has_reset_engine: yes

<7> [330.980763] i915 device info: has_3d_pipeline: yes

<7> [330.980767] i915 device info: has_4tile: no

<7> [330.980770] i915 device info: has_flat_ccs: no

<7> [330.980773] i915 device info: has_global_mocs: no

<7> [330.980777] i915 device info: has_gmd_id: no

<7> [330.980780] i915 device info: has_gt_uc: yes

<7> [330.980784] i915 device info: has_heci_pxp: no

<7> [330.980802] i915 device info: has_heci_gscfi: no

<7> [330.980805] i915 device info: has_guc_deprivilege: no

<7> [330.980830] i915 device info: has_l3_ccs_read: no

<7> [330.980834] i915 device info: has_l3_dpf: no

<7> [330.980839] i915 device info: has_llc: yes

<7> [330.980843] i915 device info: has_logical_ring_contexts: yes

<7> [330.980847] i915 device info: has_logical_ring_elsq: no

<7> [330.980852] i915 device info: has_media_ratio_mode: no

<7> [330.980856] i915 device info: has_mslice_steering: no

<7> [330.980861] i915 device info: has_oa_bpc_reporting: no

<7> [330.980865] i915 device info: has_oa_slice_contrib_limits: no

<7> [330.980870] i915 device info: has_oam: no

<7> [330.980874] i915 device info: has_one_eu_per_fuse_bit: no

<7> [330.980878] i915 device info: has_pxp: no

<7> [330.980883] i915 device info: has_rc6: yes

<7> [330.980887] i915 device info: has_rc6p: no

<7> [330.980891] i915 device info: has_rps: yes

<7> [330.980895] i915 device info: has_runtime_pm: yes

<7> [330.980900] i915 device info: has_snoop: no

<7> [330.980904] i915 device info: has_coherent_ggtt: yes

<7> [330.980909] i915 device info: tuning_thread_rr_after_dep: no

<7> [330.980913] i915 device info: unfenced_needs_alignment: no

<7> [330.980917] i915 device info: hws_needs_physical: no

<7> [330.980922] i915 device info: has_pooled_eu: no

<7> [330.980926] i915 device info: rawclk rate: 24000 kHz

<7> [330.980931] i915 device info: display version: 9

<7> [330.980936] i915 device info: cursor_needs_physical: no

<7> [330.980940] i915 device info: has_cdclk_crawl: no

<7> [330.980944] i915 device info: has_cdclk_squash: no

<7> [330.980949] i915 device info: has_ddi: yes

<7> [330.980953] i915 device info: has_dp_mst: yes

<7> [330.980957] i915 device info: has_dsb: no

<7> [330.980962] i915 device info: has_fpga_dbg: yes

<7> [330.980966] i915 device info: has_gmch: no

<7> [330.980970] i915 device info: has_hotplug: yes

<7> [330.980975] i915 device info: has_hti: no

<7> [330.980979] i915 device info: has_ipc: yes

<7> [330.980983] i915 device info: has_overlay: no

<7> [330.980988] i915 device info: has_psr: yes

<7> [330.980992] i915 device info: has_psr_hw_tracking: yes

<7> [330.980996] i915 device info: overlay_needs_physical: no

<7> [330.981001] i915 device info: supports_tv: no

<7> [330.981005] i915 device info: has_hdcp: yes

<7> [330.981010] i915 device info: has_dmc: yes

<7> [330.981014] i915 device info: has_dsc: no

<7> [330.981018] i915 device info: iommu: disabled

<7> [330.981023] i915 device info: available engines: 40403

<7> [330.981028] i915 device info: slice total: 1, mask=0001

<7> [330.981033] i915 device info: subslice total: 3

<7> [330.981037] i915 device info: slice0: 3 subslices, mask=00000007

<7> [330.981041] i915 device info: slice1: 0 subslices, mask=00000000

<7> [330.981045] i915 device info: slice2: 0 subslices, mask=00000000

<7> [330.981049] i915 device info: EU total: 24

<7> [330.981053] i915 device info: EU per subslice: 8

<7> [330.981057] i915 device info: has slice power gating: no

<7> [330.981061] i915 device info: has subslice power gating: no

<7> [330.981065] i915 device info: has EU power gating: yes

<6> [330.981070] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [330.981074] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [330.981079] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [330.981085] i915: Performing live selftests with st_random_seed=0x297e68f1 st_timeout=500

<6> [330.981130] i915: Running intel_tlb_live_selftests/invalidate_full

<4> [330.981440] Failed to allocate contiguous pages for size 400000

<7> [330.983376] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] status updated from unknown to disconnected

<7> [330.983404] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] disconnected

<7> [330.983415] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [330.983424] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [330.983431] [drm:drm_client_modeset_probe] connector 103 enabled? no

<7> [330.983437] [drm:drm_client_modeset_probe] connector 112 enabled? no

<7> [330.983444] [drm:drm_client_modeset_probe] connector 118 enabled? no

<7> [330.983450] [drm:drm_client_modeset_probe] connector 124 enabled? no

<7> [330.983517] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [330.983536] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [330.983572] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [330.983591] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [330.986435] [drm:drm_client_modeset_probe]

<7> [330.986492] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1]

<7> [330.986503] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [330.986755] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] disconnected

<7> [330.986765] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1]

<7> [330.986773] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [330.987034] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected

<7> [330.987045] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1]

<7> [330.987055] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-1]

<7> [330.987316] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] disconnected

<7> [330.987324] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2]

<7> [330.987333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-2]

<7> [330.987597] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] disconnected

<7> [330.987608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2]

<7> [330.987619] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:124:HDMI-A-2]

<7> [330.987939] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] disconnected

<7> [330.987950] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [330.987959] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [330.987966] [drm:drm_client_modeset_probe] connector 103 enabled? no

<7> [330.987974] [drm:drm_client_modeset_probe] connector 112 enabled? no

<7> [330.987981] [drm:drm_client_modeset_probe] connector 118 enabled? no

<7> [330.987988] [drm:drm_client_modeset_probe] connector 124 enabled? no

<7> [330.988047] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [330.988066] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [330.988098] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [330.988116] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [330.988235] [drm:drm_client_modeset_probe]

<7> [330.988308] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1]

<7> [330.988320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [330.988616] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] disconnected

<7> [330.988627] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1]

<7> [330.988639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [330.989392] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected

<7> [330.989405] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1]

<7> [330.989417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-1]

<7> [330.989713] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:HDMI-A-1] disconnected

<7> [330.989724] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2]

<7> [330.989735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-2]

<7> [330.990232] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-2] disconnected

<7> [330.990245] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2]

<7> [330.990257] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:124:HDMI-A-2]

<7> [330.990548] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:HDMI-A-2] disconnected

<7> [330.990558] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [330.990566] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [330.990574] [drm:drm_client_modeset_probe] connector 103 enabled? no

<7> [330.990581] [drm:drm_client_modeset_probe] connector 112 enabled? no

<7> [330.990588] [drm:drm_client_modeset_probe] connector 118 enabled? no

<7> [330.990594] [drm:drm_client_modeset_probe] connector 124 enabled? no

<7> [330.990656] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [330.990674] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [330.990705] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [330.990722] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [331.001576] rcs0((efault)): Sampling bce612451dc8, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:bce612451dc8+4

<6> [331.015028] rcs0((efault)): Sampling 9ecab1a72ac8, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:9ecab1a72ac0+10

<6> [331.029545] rcs0((efault)): Sampling 7a4d4c085808, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:7a4d4c085800+100

<6> [331.044484] rcs0((efault)): Sampling af73a152ded8, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:af73a1520000+10000

<6> [331.058498] rcs0((efault)): Sampling 90ebe946a38, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:90e00000000+100000000

<6> [331.071426] rcs0((efault)): Sampling 3f40e22bde28, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:0+1000000000000

<7> [331.083841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<6> [331.098055] rcs0((efault)): Sampling 6c4a6a002d68, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:6c4a6a002d68+4

<6> [331.112053] rcs0((efault)): Sampling f7b6b6e02620, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:f7b6b6e02620+10

<6> [331.125406] rcs0((efault)): Sampling 598783c07648, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:598783c07600+100

<6> [331.138191] rcs0((efault)): Sampling 18053b403528, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:18053b400000+10000

<6> [331.151346] rcs0((efault)): Sampling 17e60820db68, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:17e600000000+100000000

<6> [331.164910] rcs0((efault)): Sampling a21618008678, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:0+1000000000000

<6> [331.196410] bcs0((efault)): Sampling 3dc25e145e28, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:3dc25e145e28+4

<6> [331.216106] bcs0((efault)): Sampling da3f640e5760, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:da3f640e5760+10

<6> [331.235686] bcs0((efault)): Sampling 8e5e4ef7f7c8, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:8e5e4ef7f700+100

<6> [331.257120] bcs0((efault)): Sampling 3cb9b5fcd8a0, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:3cb9b5fc0000+10000

<6> [331.276763] bcs0((efault)): Sampling 3992e3130f50, with alignment 1000, using PTE size 11000 (phys 100000, sg 11000), invalidate:399200000000+100000000

<6> [331.296786] bcs0((efault)): Sampling 98ecb3b05058, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:0+1000000000000

<6> [331.335487] bcs0((efault)): Sampling eb2479008198, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:eb2479008198+4

<6> [331.355892] bcs0((efault)): Sampling 9f7e07204ca0, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:9f7e07204ca0+10

<6> [331.375166] bcs0((efault)): Sampling 7d4b96c068e8, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:7d4b96c06800+100

<6> [331.393651] bcs0((efault)): Sampling bf9bf300f348, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:bf9bf3000000+10000

<6> [331.412873] bcs0((efault)): Sampling 12922a60fd28, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:129200000000+100000000

<6> [331.432641] bcs0((efault)): Sampling c8f1df80fc78, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:0+1000000000000

<6> [331.474383] vcs0((efault)): Sampling fe4170848b20, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:fe4170848b20+4

<6> [331.494039] vcs0((efault)): Sampling cb88a6496208, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:cb88a6496200+10

<6> [331.513620] vcs0((efault)): Sampling 22b0c850230, with alignment 1000, using PTE size 11000 (phys 100000, sg 11000), invalidate:22b0c850200+100

<6> [331.533902] vcs0((efault)): Sampling c363f00c9658, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:c363f00c0000+10000

<6> [331.553783] vcs0((efault)): Sampling b324f354bd30, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:b32400000000+100000000

<6> [331.574200] vcs0((efault)): Sampling 91fc1b13f450, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:0+1000000000000

<6> [331.614525] vcs0((efault)): Sampling 2af219404638, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:2af219404638+4

<6> [331.635773] vcs0((efault)): Sampling 76af120e6f8, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:76af120e6f0+10

<6> [331.654946] vcs0((efault)): Sampling e59bd700dfc8, with alignment 10000, using PTE size 10000 (phys 100000, sg 11000), invalidate:e59bd700df00+100

<6> [331.674063] vcs0((efault)): Sampling b41478403ab0, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:b41478400000+10000

<6> [331.692880] vcs0((efault)): Sampling 86cbd04034c8, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:86cb00000000+100000000

<6> [331.711170] vcs0((efault)): Sampling 9fb59e00f2e0, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:0+1000000000000

<6> [331.745281] vecs0((efault)): Sampling fd30f736380, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:fd30f736380+4

<6> [331.761691] vecs0((efault)): Sampling 135d12cbdd8, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:135d12cbdd0+10

<6> [331.778590] vecs0((efault)): Sampling 6b67112ab110, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:6b67112ab100+100

<6> [331.794634] vecs0((efault)): Sampling 98553137f6b8, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:985531370000+10000

<6> [331.810644] vecs0((efault)): Sampling 5803a7246998, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:580300000000+100000000

<6> [331.826625] vecs0((efault)): Sampling 77262177e340, with alignment 1000, using PTE size 1000 (phys 100000, sg 11000), invalidate:0+1000000000000

<6> [331.860346] vecs0((efault)): Sampling 2e717700d0f8, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:2e717700d0f8+4

<6> [331.878675] vecs0((efault)): Sampling a6c84740a398, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:a6c84740a390+10

<6> [331.898313] vecs0((efault)): Sampling 4da8d3a05bf0, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:4da8d3a05b00+100

<6> [331.917326] vecs0((efault)): Sampling 9b88f360fc38, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:9b88f3600000+10000

<6> [331.935304] vecs0((efault)): Sampling 499940e0a310, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:499900000000+100000000

<6> [331.953302] vecs0((efault)): Sampling 94a1c3e05ae0, with alignment 10000, using PTE size 11000 (phys 100000, sg 11000), invalidate:0+1000000000000

<7> [331.990998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [331.991660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [331.992193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [331.992739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [331.993234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [332.032490] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [332.113106] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<7> [332.113849] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [332.114335] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [332.114714] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [332.747331] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [332.748744] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<4> [332.789031] i915: probe of 0000:00:02.0 failed with error -25

<6> [333.046832] [IGT] i915_selftest: finished subtest gt_tlb, SUCCESS

Results for igt@i915_selftest@live@gt_tlb