Results for igt@kms_pm_rpm@basic-rte

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.28-g08e87a32f (x86_64) (Linux: 6.6.0-rc6-linus-v6.6-rc6-g58720809f527+ x86_64)
Out 
Starting subtest: basic-rte
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x79/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915]
   intel_runtime_suspend+0xec/0x2a0 [i915]
   pci_pm_runtime_suspend+0x5a/0x1a0
   __rpm_callback+0x3c/0x110
   rpm_callback+0x58/0x70
   rpm_suspend+0x118/0x5f0
   pm_runtime_work+0x9f/0xb0
Wakeref count: 1
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   __intel_display_power_put_async+0x3d/0x160 [i915]
   intel_atomic_commit_tail+0xa2e/0xd20 [i915]
   intel_atomic_commit+0x381/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
Subtest basic-rte: SUCCESS (1.961s)
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x79/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915]
   intel_runtime_suspend+0xec/0x2a0 [i915]
   pci_pm_runtime_suspend+0x5a/0x1a0
   __rpm_callback+0x3c/0x110
   rpm_callback+0x58/0x70
   rpm_suspend+0x118/0x5f0
   pm_runtime_work+0x9f/0xb0
Wakeref count: 1
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   __intel_display_power_put_async+0x3d/0x160 [i915]
   intel_atomic_commit_tail+0xa2e/0xd20 [i915]
   intel_atomic_commit+0x381/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
Err 
Starting subtest: basic-rte
Subtest basic-rte: SUCCESS (1.961s)
Dmesg
<7> [85.663099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [85.663254] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [85.663376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [85.663928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [85.699530] Console: switching to colour dummy device 80x25
<6> [85.699584] [IGT] kms_pm_rpm: executing
<6> [85.702369] [IGT] kms_pm_rpm: starting subtest basic-rte
<7> [85.702436] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [85.707147] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [85.707155] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [85.707286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [85.707908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [85.708361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [85.708661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [85.709105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [85.709112] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [85.709227] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [85.723878] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [85.723883] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [85.723991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [85.724139] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [85.724686] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
<7> [85.724692] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [85.724805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [85.725436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [85.725543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [85.725829] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [85.726246] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [85.726251] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [85.726365] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [85.740493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [85.740498] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [85.740604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [85.740732] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [85.741220] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]
<7> [85.741226] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [85.741341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [85.741761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [85.741889] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected
<7> [85.742279] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [85.742285] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [85.742397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [85.743016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [85.743182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [85.743505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [85.743911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [85.743916] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [85.744018] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [85.758735] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [85.758740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [85.758844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [85.758968] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [85.758989] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
<7> [85.758993] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [85.759157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [85.759775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [85.759880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [85.760171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [85.760575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [85.760579] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [85.760682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [85.774860] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [85.774867] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [85.774979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [85.775130] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [85.775153] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]
<7> [85.775158] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [85.775273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [85.775692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [85.775842] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected
<7> [85.775886] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [85.775892] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [85.776012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [85.776669] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [85.776779] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [85.777091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [85.777521] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [85.777527] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [85.777638] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [85.793347] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [85.793353] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [85.793483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [85.793609] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [85.793657] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
<7> [85.793662] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [85.793772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [85.794414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [85.794543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [85.794845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [85.795275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [85.795280] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [85.795414] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [85.810576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [85.810581] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [85.810686] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [85.810812] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [85.810875] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]
<7> [85.810879] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [85.810991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [85.811470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [85.811625] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected
<7> [86.813685] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [86.815592] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [86.828764] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [86.853249] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [86.858530] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [86.859069] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [86.859819] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [86.859956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [86.860149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [86.860426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [86.861248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [86.861515] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [86.861647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [86.861817] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [86.862187] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [86.862364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [86.862371] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [86.862523] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [86.865457] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [86.865464] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [86.865627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [86.865811] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [86.865988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [86.866621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [86.866820] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [86.866831] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [86.866995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [86.868125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [86.868355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [86.868746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [86.869224] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [86.869231] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [86.869405] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [86.884747] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [86.884756] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [86.884916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [86.885160] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [86.886221] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [86.886664] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [86.890140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [86.914458] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [86.920655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [86.921193] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [86.921371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [86.921552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [86.922009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [86.922667] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [86.922693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [86.922898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [86.923171] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [86.923387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [86.923990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [86.924200] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [86.924231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [86.924425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [86.925583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [86.925736] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [86.926378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [86.926895] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [86.926904] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [86.927108] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [86.942330] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [86.942338] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [86.942487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [86.942675] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [86.942684] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [86.942838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [86.943902] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [86.944124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [86.944464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [86.944911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [86.944920] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [86.945153] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [86.959940] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [86.959946] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [86.960076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [86.960257] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [86.960269] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [86.961226] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [86.963670] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [86.988214] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [87.000471] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [87.001481] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [87.002119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.002964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [87.004321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [87.006144] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [87.006803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [87.007511] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [87.008435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [87.009650] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.010378] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [87.010435] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [87.011304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.013484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.014103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [87.015221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.016213] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.016237] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.016838] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [87.039341] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.039354] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [87.039580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.039869] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [87.040930] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [87.041361] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [87.042622] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [87.045099] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [87.069437] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [87.075664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [87.076227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [87.076425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.077530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.077739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [87.078113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.078627] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.078634] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.078803] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [87.094071] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.094080] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [87.094243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.094448] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [87.094458] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [87.094632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.095134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.095332] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [87.095348] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [87.095532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.096305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.096456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [87.096782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.097306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.097312] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.097482] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [87.112663] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.112668] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [87.112774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.112905] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [87.112911] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [87.113020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.114093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.114216] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [87.114504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.114907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.114912] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.115019] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [87.131815] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.131820] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [87.131925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.132088] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [87.133024] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [87.133033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [87.133515] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [87.137176] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [87.161565] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [87.167405] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [87.167955] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [87.168057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.168971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.169183] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [87.169195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [87.169334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.169969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.170114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [87.170693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.171232] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.171237] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.171363] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [87.185476] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.185482] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [87.185588] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.185722] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [87.185728] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [87.185851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.186489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.186594] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [87.186886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.187312] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.187316] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.187445] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [87.202603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.202609] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [87.202716] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.202850] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [87.202856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [87.202970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.203402] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.203563] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [87.203571] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [87.204546] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [87.206971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [87.310672] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [87.323455] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [87.342112] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [87.343666] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [87.344604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.345763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [87.347093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [87.348902] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [87.349769] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [87.350194] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.350947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [87.352123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.353027] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.353130] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.353984] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [87.360323] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.360364] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [87.361348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [87.362404] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [87.363437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [87.364922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.366010] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [87.367447] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [87.367484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [87.368509] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [87.376666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [87.401254] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [87.407608] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [87.408226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [87.408468] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.409724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.410016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [87.410843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.411468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.411480] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.411766] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [87.429786] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.429799] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [87.430074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.430389] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [87.431446] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [87.431468] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [87.431986] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [87.435840] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [87.460230] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [87.466056] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [87.466554] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [87.466653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.467122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.467346] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [87.467365] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [87.467550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.468275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.468451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [87.468814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.469329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.469336] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.469508] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [87.484770] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.484778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [87.484958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.485201] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [87.485218] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [87.486682] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [87.490437] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [87.514861] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [87.519028] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [87.519543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [87.519645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.519764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [87.520180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [87.520831] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [87.520833] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [87.521264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.521439] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [87.521805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.521992] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.522000] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.522187] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [87.525277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.525285] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [87.525467] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [87.525663] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [87.525853] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [87.526492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.526708] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [87.526718] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [87.526901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.527407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.527613] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [87.527711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.527859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [87.528313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [87.528884] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [87.529292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.529461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [87.529822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.530009] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.530016] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.530196] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [87.533283] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.533291] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [87.533471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [87.533665] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [87.533856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [87.534482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.534690] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [87.534699] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [87.534880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.535938] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.536121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [87.536767] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.537303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.537310] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.537477] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [87.552697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.552705] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [87.552867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.553072] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [87.553081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [87.553250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.553729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.553918] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [87.553929] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [87.554927] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [87.558351] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [87.641458] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [87.656261] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [87.657848] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [87.658414] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [87.659142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.659945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [87.660962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [87.662661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<6> [87.663482] [IGT] kms_pm_rpm: finished subtest basic-rte, SUCCESS
<7> [87.663593] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [87.663341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [87.664195] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.664806] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.664833] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.665467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [87.670082] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.670110] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [87.670720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [87.671464] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [87.672168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [87.673321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.674123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [87.675468] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [87.675507] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [87.676495] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [87.687398] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [87.712098] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [87.723337] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [87.724029] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [87.724281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.725668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.726094] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [87.726929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.727583] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.727602] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.727972] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [87.746556] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.746567] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [87.746766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.747017] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [87.747038] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [87.748079] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [87.752091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [87.776511] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [87.783633] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [87.784222] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [87.784403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.784616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [87.785132] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [87.785790] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [87.785796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [87.786108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [87.786343] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [87.786557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [87.787291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.787564] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [87.787732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.787946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [87.788465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [87.789157] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [87.789184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [87.789632] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.789870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [87.790342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.790546] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.790555] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.790738] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [87.793825] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.793835] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [87.794031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [87.794274] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [87.794488] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [87.795168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.795411] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [87.795423] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [87.795624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.796737] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.796924] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [87.797323] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.797809] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.797817] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.798002] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [87.813784] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.813792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [87.813952] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.814177] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [87.814194] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [87.815193] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [87.818950] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [87.843338] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [87.850176] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [87.850698] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [87.850890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.851106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [87.851590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [87.852274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [87.852508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [87.852715] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [87.852961] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [87.853668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.853896] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [87.853915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [87.854174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.855352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.855576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [87.856319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.856841] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.856852] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.857064] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [87.872322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.872331] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [87.872506] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.872725] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [87.872735] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [87.872917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.874103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.874314] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [87.874693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.875221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.875232] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.875440] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [87.890666] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.890673] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [87.890806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.890943] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [87.890949] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [87.891076] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [87.892025] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [87.895479] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [87.919870] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [87.924398] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [87.924912] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [87.925002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.925460] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.925628] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [87.925640] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [87.925777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.926445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.926574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [87.927202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [87.927679] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.927685] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.927805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [87.941952] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [87.941958] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [87.942081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.942216] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [87.942222] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [87.942362] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.943023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.943154] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [87.943441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [87.943882] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.943887] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [87.943993] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [87.959190] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [87.959208] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [87.959313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.959444] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [87.959451] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [87.959562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [87.959978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [87.960150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [87.961075] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [87.961099] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [87.964841] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [88.083694] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [88.108463] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [88.111097] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [88.111962] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [88.113233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [88.114132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [88.115352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [88.116547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [88.117454] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10
<7> [88.117993] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [88.118903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [88.120009] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [88.120731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [88.120759] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [88.121393] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [88.127674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [88.127697] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [88.128175] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [88.128200] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [88.129127] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [88.129736] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [88.130743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [88.130986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [88.131519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [88.131955] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [88.132389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [88.133268] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [88.133287] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [88.133818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [88.152795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [88.152803] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [88.152952] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [88.153149] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [88.153158] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [88.153315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [88.153887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [88.154158] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [88.309725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [88.309853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [88.310278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<6> [88.310965] [IGT] kms_pm_rpm: exiting, ret=0
<6> [88.312019] Console: switching to colour frame buffer device 128x48
Created at 2023-10-15 23:44:09