igt@i915_selftest@live@hangcheck on fi-cfl-guc@linus-v6.6-rc6 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-g08e87a32f (x86_64) (Linux: 6.6.0-rc6-linus-v6.6-rc6-g58720809f527+ x86_64)
Out	Starting dynamic subtest: hangcheck Dynamic subtest hangcheck: SUCCESS (24.190s)
Err	Starting dynamic subtest: hangcheck Dynamic subtest hangcheck: SUCCESS (24.190s)
Dmesg	<6> [269.928697] [IGT] i915_selftest: starting dynamic subtest hangcheck <5> [270.016310] Setting dangerous option enable_guc - tainting kernel <5> [270.016316] Setting dangerous option live_selftests - tainting kernel <7> [270.045127] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [270.045316] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [270.045513] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [270.045521] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP) <7> [270.045737] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [270.045917] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [270.046039] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [270.046620] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [270.046734] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [270.046844] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [270.046954] i915 0000:00:02.0: vgaarb: deactivate vga console <7> [270.047346] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047 <7> [270.047574] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [270.047839] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8c90a018 <7> [270.047991] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [270.048123] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [270.048253] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [270.048382] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [270.052517] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [270.052658] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [270.052792] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [270.052925] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [270.053059] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [270.053165] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [270.053267] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [270.053447] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [270.053571] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [270.053673] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [270.053776] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [270.053877] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [270.053978] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [270.054079] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [270.054474] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [270.054663] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209 <7> [270.054835] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [270.054986] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [270.055136] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [270.055284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [270.055508] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [270.055676] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [270.055825] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [270.055976] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [270.056124] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [270.056272] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [270.056475] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [270.056708] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [270.056851] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [270.056997] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [270.057142] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [270.057287] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [270.057511] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [270.057745] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [270.057888] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [270.058031] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [270.058172] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [270.058314] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9 <7> [270.058536] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [270.058768] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 10 <7> [270.058911] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [270.059054] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 10 <7> [270.059196] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [270.059339] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [270.059561] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [270.059768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [270.059941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [270.060098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [270.060245] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [270.060424] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [270.060639] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [270.060783] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [270.060966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [270.061108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [270.061250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [270.061442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [270.061683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [270.061828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [270.061971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [270.062114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [270.062279] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [270.063248] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [270.063771] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [270.064123] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [270.064289] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [270.064517] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [270.064690] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [270.064825] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [270.064959] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [270.065093] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [270.065227] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [270.065361] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [270.065590] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [270.066694] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [270.067550] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [270.067754] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [270.067906] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [270.069447] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [270.069612] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [270.069765] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [270.069915] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [270.070071] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [270.070221] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [270.070369] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [270.070593] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [270.070743] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [270.070891] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [270.071042] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [270.071222] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [270.071437] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [270.071592] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [270.071727] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [270.071861] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [270.071995] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [270.072173] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [270.072481] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [270.072627] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [270.072814] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [270.072957] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [270.073128] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [270.073269] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [270.286395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.297395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.308395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.319397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.330395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.341395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.352395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.363397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.374395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.385395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.396395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.407397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.418395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.429395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.440395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.451397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.462395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.473395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.484395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.495397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.506395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.517395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.528395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.539398] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.550395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.561395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.572395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.583397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.594395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.605395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.616395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.627397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [270.627571] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [270.627583] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [270.627642] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [270.627807] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [270.627987] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [270.628115] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [270.628405] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [270.628549] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [270.628735] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI D/PHY D] Using AUX CH D (VBT) <7> [270.628891] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI D/PHY D] <7> [270.629210] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [270.629342] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D/PHY D] <7> [270.629541] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:108:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [270.629811] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:119:DDI E/PHY E] Using AUX CH A (VBT) <7> [270.629943] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:119:DDI E/PHY E] <7> [270.630120] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [270.630531] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [270.630751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [270.630897] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [270.631031] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [270.631164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [270.631297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [270.631526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [270.631727] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [270.631862] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [270.631997] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [270.632132] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [270.632267] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [270.632427] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [270.632643] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [270.632813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D/PHY D] hw state readout: disabled, pipe A <7> [270.632973] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST A] hw state readout: disabled, pipe A <7> [270.633099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST B] hw state readout: disabled, pipe B <7> [270.633226] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST C] hw state readout: disabled, pipe C <7> [270.633358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DDI E/PHY E] hw state readout: disabled, pipe A <7> [270.633585] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [270.633810] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [270.633946] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [270.634135] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [270.634315] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [270.634568] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [270.634776] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [270.634912] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:HDMI-A-3] hw state readout: disabled <7> [270.635047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:120:DP-2] hw state readout: disabled <7> [270.635174] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [270.635300] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [270.635507] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [270.635655] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [270.635794] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [270.635928] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [270.636059] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [270.636208] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [270.636350] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [270.636559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [270.636724] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [270.636851] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [270.637019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [270.637155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [270.637290] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [270.637468] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [270.637700] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [270.637829] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [270.637989] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [270.640420] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [270.640582] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [270.640690] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [270.640802] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [270.640928] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7> [270.641872] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [270.642001] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [270.642124] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [270.646576] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [270.646783] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [270.646932] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [270.669173] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [270.669330] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [270.669476] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [270.669611] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [270.669744] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [270.669876] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x3e920000 <7> [270.670010] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [270.670143] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [270.670277] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [270.670418] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [270.670552] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [270.670685] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [270.670818] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [270.670951] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [270.671084] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [270.672086] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.672089] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.678521] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.679154] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.679312] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.679314] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [270.686175] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [270.686291] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [270.686403] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [270.686513] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [270.686790] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [270.687348] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [270.687493] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [270.687625] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [270.687755] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [270.687900] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [270.690949] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [270.691226] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [270.691536] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 <7> [270.692039] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <7> [270.692296] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:HDMI-A-3] generating connector hotplug event <7> [270.692588] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 <7> [270.693051] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:120:DP-2] generating connector hotplug event <6> [270.693088] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [270.694473] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [270.711958] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [270.713881] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input86 <7> [270.714574] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [270.715253] [drm:drm_client_modeset_probe] <7> [270.715288] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [270.715219] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [270.715294] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [270.715502] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [270.715515] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [270.715521] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [270.715487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [270.715525] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [270.715673] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [270.715680] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [270.715684] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [270.715689] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [270.715709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [270.715822] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [270.715828] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [270.715832] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] <7> [270.715836] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [270.715966] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] status updated from unknown to disconnected <7> [270.715973] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected <7> [270.715977] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] <7> [270.715915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [270.715981] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [270.716111] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] status updated from unknown to disconnected <7> [270.716118] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected <7> [270.716121] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [270.716124] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [270.716127] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [270.716130] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [270.716132] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [270.716134] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [270.716156] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [270.716163] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [270.716175] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [270.716182] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [270.716574] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [270.716742] [drm:drm_client_modeset_probe] <7> [270.716769] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [270.716804] i915 device info: pciid=0x3e92 rev=0x00 platform=COFFEELAKE (subplatform=0x0) gen=9 <7> [270.716808] i915 device info: graphics version: 9 <7> [270.716810] i915 device info: media version: 9 <7> [270.716813] i915 device info: graphics stepping: <7> [270.716815] i915 device info: media stepping: <7> [270.716818] i915 device info: display stepping: <7> [270.716820] i915 device info: base die stepping: <7> [270.716822] i915 device info: gt: 2 <7> [270.716824] i915 device info: memory-regions: 0x21 <7> [270.716827] i915 device info: page-sizes: 0x11000 <7> [270.716829] i915 device info: platform: COFFEELAKE <7> [270.716831] i915 device info: ppgtt-size: 48 <7> [270.716834] i915 device info: ppgtt-type: 2 <7> [270.716836] i915 device info: dma_mask_size: 39 <7> [270.716838] i915 device info: is_mobile: no <7> [270.716774] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [270.716840] i915 device info: is_lp: no <7> [270.716842] i915 device info: require_force_probe: no <7> [270.716844] i915 device info: is_dgfx: no <7> [270.716846] i915 device info: has_64bit_reloc: yes <7> [270.716848] i915 device info: has_64k_pages: no <7> [270.716850] i915 device info: gpu_reset_clobbers_display: no <7> [270.716852] i915 device info: has_reset_engine: yes <7> [270.716854] i915 device info: has_3d_pipeline: yes <7> [270.716856] i915 device info: has_4tile: no <7> [270.716858] i915 device info: has_flat_ccs: no <7> [270.716860] i915 device info: has_global_mocs: no <7> [270.716862] i915 device info: has_gmd_id: no <7> [270.716864] i915 device info: has_gt_uc: yes <7> [270.716866] i915 device info: has_heci_pxp: no <7> [270.716867] i915 device info: has_heci_gscfi: no <7> [270.716869] i915 device info: has_guc_deprivilege: no <7> [270.716871] i915 device info: has_l3_ccs_read: no <7> [270.716873] i915 device info: has_l3_dpf: no <7> [270.716875] i915 device info: has_llc: yes <7> [270.716877] i915 device info: has_logical_ring_contexts: yes <7> [270.716879] i915 device info: has_logical_ring_elsq: no <7> [270.716881] i915 device info: has_media_ratio_mode: no <7> [270.716883] i915 device info: has_mslice_steering: no <7> [270.716885] i915 device info: has_oa_bpc_reporting: no <7> [270.716887] i915 device info: has_oa_slice_contrib_limits: no <7> [270.716889] i915 device info: has_oam: no <7> [270.716891] i915 device info: has_one_eu_per_fuse_bit: no <7> [270.716893] i915 device info: has_pxp: no <7> [270.716894] i915 device info: has_rc6: yes <7> [270.716896] i915 device info: has_rc6p: no <7> [270.716898] i915 device info: has_rps: yes <7> [270.716900] i915 device info: has_runtime_pm: yes <7> [270.716902] i915 device info: has_snoop: no <7> [270.716904] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [270.716908] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [270.716917] i915 device info: has_coherent_ggtt: yes <7> [270.716919] i915 device info: tuning_thread_rr_after_dep: no <7> [270.716922] i915 device info: unfenced_needs_alignment: no <7> [270.716924] i915 device info: hws_needs_physical: no <7> [270.716926] i915 device info: has_pooled_eu: no <7> [270.716929] i915 device info: rawclk rate: 24000 kHz <7> [270.716931] i915 device info: display version: 9 <7> [270.716934] i915 device info: cursor_needs_physical: no <7> [270.716936] i915 device info: has_cdclk_crawl: no <7> [270.716938] i915 device info: has_cdclk_squash: no <7> [270.716939] i915 device info: has_ddi: yes <7> [270.716941] i915 device info: has_dp_mst: yes <7> [270.716944] i915 device info: has_dsb: no <7> [270.716946] i915 device info: has_fpga_dbg: yes <7> [270.716948] i915 device info: has_gmch: no <7> [270.716951] i915 device info: has_hotplug: yes <7> [270.716953] i915 device info: has_hti: no <7> [270.716955] i915 device info: has_ipc: yes <7> [270.716957] i915 device info: has_overlay: no <7> [270.716960] i915 device info: has_psr: yes <7> [270.716962] i915 device info: has_psr_hw_tracking: yes <7> [270.716964] i915 device info: overlay_needs_physical: no <7> [270.716966] i915 device info: supports_tv: no <7> [270.716968] i915 device info: has_hdcp: yes <7> [270.716970] i915 device info: has_dmc: yes <7> [270.716972] i915 device info: has_dsc: no <7> [270.716975] i915 device info: iommu: disabled <7> [270.716911] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [270.716977] i915 device info: available engines: 40403 <7> [270.716980] i915 device info: slice total: 1, mask=0001 <7> [270.716982] i915 device info: subslice total: 3 <7> [270.716984] i915 device info: slice0: 3 subslices, mask=00000007 <7> [270.716987] i915 device info: slice1: 0 subslices, mask=00000000 <7> [270.716989] i915 device info: slice2: 0 subslices, mask=00000000 <7> [270.716991] i915 device info: EU total: 24 <7> [270.716993] i915 device info: EU per subslice: 8 <7> [270.716995] i915 device info: has slice power gating: no <7> [270.716997] i915 device info: has subslice power gating: no <7> [270.716999] i915 device info: has EU power gating: yes <6> [270.717001] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [270.717003] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [270.717006] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [270.717009] i915: Performing live selftests with st_random_seed=0xf31720a0 st_timeout=500 <6> [270.717012] i915: Running hangcheck <6> [270.717036] i915: Running intel_hangcheck_live_selftests/igt_hang_sanitycheck <7> [270.717074] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [270.717080] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [270.717087] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [270.717269] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [270.717276] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] <7> [270.717281] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [270.717456] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected <7> [270.717461] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] <7> [270.717465] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [270.717594] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected <7> [270.717598] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [270.717601] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [270.717603] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [270.717606] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [270.717608] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [270.717611] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [270.717629] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [270.717636] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [270.717647] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [270.717653] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [270.758557] i915: Running intel_hangcheck_live_selftests/igt_reset_nop <6> [270.762214] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.762252] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.764782] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.765247] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.765450] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.765454] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.769866] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.769870] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.772099] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.772335] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.772502] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.772504] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.775282] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.775286] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.777444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.777664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.777814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.777816] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.780671] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.780675] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.782896] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.783120] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.783277] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.783279] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.786244] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.786248] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.788451] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.788669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.788818] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.788820] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.791581] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.791585] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.793411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.793623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.793770] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.793772] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.796547] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.796551] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.798476] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.798703] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.798861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.798863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.802142] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.802146] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.804395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.804664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.804822] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.804824] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.807688] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.807692] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.809838] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.810063] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.810221] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.810223] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.813015] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.813019] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.815045] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.815282] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.815488] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.815490] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.818310] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.818314] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.820409] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.820645] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.820814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.820816] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.823798] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.823802] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.825980] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.826232] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.826451] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.826454] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.830135] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.830140] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.832481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.832723] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.832894] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.832897] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [270.835445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <6> [270.836051] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.836055] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.838294] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.838646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.838846] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.838849] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.842273] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.842278] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.844457] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.844716] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.844902] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.844905] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.848201] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.848205] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.850431] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.850702] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.850901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.850904] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.854178] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.854182] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.856415] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.856687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.856886] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.856889] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.860168] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.860173] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.862414] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.862670] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.862857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.862859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.867186] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.867191] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.869369] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.869654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.869852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.869855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.874040] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.874045] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.876479] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.876773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.876990] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.876993] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.881293] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.881298] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.883477] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.883772] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.883990] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.883993] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.887682] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.887687] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.889960] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.890253] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.890507] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.890510] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.894034] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.894039] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.896356] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.896648] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.896852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.896855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.900734] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.900740] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.903017] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.903307] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.903545] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.903548] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.907081] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.907086] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.909375] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.909714] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.909932] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.909935] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.913583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.913588] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.915853] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.916144] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.916362] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.916365] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.919956] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.919962] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.922235] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.922574] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.922791] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.922794] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.926362] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.926367] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.928406] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.928670] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.928863] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.928866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.931959] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.931963] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.934045] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.934284] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.934539] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.934541] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.937372] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.937376] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.939520] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.939744] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.939901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.939903] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.943341] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.943344] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.945404] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.945614] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.945761] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.945763] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.948793] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.948796] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.951008] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.951232] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.951469] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.951472] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.954396] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.954400] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.956447] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.956673] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.956830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.956832] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.959980] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.959984] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.962317] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.962607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.962765] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.962768] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.966299] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.966303] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.968507] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.968731] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.968889] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.968891] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.972071] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.972074] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.974374] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.974637] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.974796] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.974798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.977707] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.977711] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.979933] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.980159] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.980318] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.980320] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.983426] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.983430] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.985398] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.985610] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.985758] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.985760] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.988875] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.988879] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.991078] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.991302] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.991512] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.991516] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [270.994743] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [270.994746] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [270.996994] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [270.997219] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [270.997377] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [270.997379] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.000526] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.000529] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.002491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.002706] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.002852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.002855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.005970] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.005974] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.008305] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.008568] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.008726] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.008729] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.011537] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.011540] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.013405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.013618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.013766] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.013768] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.016812] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.016816] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.019097] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.019321] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.019527] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.019531] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.022629] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.022632] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.024752] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.024973] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.025131] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.025133] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.028491] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.028494] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.030434] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.030662] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.030819] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.030821] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.033984] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.033988] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.036319] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.036610] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.036769] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.036771] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.039657] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.039661] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.041785] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.042002] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.042150] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.042152] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.044945] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.044948] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.047059] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.047271] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.047428] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.047430] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.050071] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.050075] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.052203] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.052431] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.052615] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.052618] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.055312] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.055316] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.057405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.057623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.057771] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.057773] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.060435] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.060438] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.062402] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.062654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.062802] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.062804] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.065959] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.065962] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.068094] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.068318] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.068491] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.068494] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.071279] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.071283] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.073438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.073679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.073836] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.073839] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.076521] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.076525] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.078447] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.078671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.078831] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.078833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.081512] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.081515] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.083449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.083672] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.083830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.083832] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.086481] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.086485] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.088394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.088616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.088774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.088776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.091444] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.091447] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.093395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.093616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.093773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.093775] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.096872] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.096876] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.099205] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.099585] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.099794] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.099798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.102726] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.102729] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.105015] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.105241] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.105504] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.105506] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.108284] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.108288] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.110449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.110693] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.110852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.110854] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.113661] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.113665] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.115887] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.116113] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.116271] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.116274] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.119009] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.119013] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.121081] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.121305] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.121506] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.121508] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.124246] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.124250] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.126427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.126639] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.126788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.126790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.129480] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.129484] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.131410] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.131623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.131770] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.131772] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.134501] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.134505] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.136448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.136671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.136830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.136833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.139477] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.139480] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.141395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.141619] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.141778] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.141780] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.144368] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.144372] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.146394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.146617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.146775] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.146777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.149539] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.149543] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.151449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.151673] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.151831] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.151833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.154509] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.154513] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.156454] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.156678] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.156836] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.156838] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.159503] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.159507] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.161449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.161675] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.161833] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.161835] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.164542] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.164546] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.166531] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.166755] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.166913] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.166915] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.169715] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.169719] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.171880] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.172095] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.172242] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.172244] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.175269] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.175273] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.177446] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.177661] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.177810] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.177812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.180773] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.180779] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.182998] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.183222] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.183381] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.183394] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.186329] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.186333] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.188401] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.188638] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.188787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.188789] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.191501] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.191505] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.193442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.193664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.193822] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.193824] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.196490] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.196493] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.198395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.198617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.198774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.198776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.201458] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.201462] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.203395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.203616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.203774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.203776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.206515] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.206518] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.208448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.208671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.208829] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.208831] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.211539] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.211542] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.213448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.213673] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.213831] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.213833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.216459] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.216462] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.218394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.218617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.218775] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.218777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.221440] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.221444] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.223394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.223616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.223773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.223775] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.226507] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.226511] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.228478] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.228701] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.228859] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.228861] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.231521] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.231524] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.233537] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.233762] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.233920] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.233922] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.236702] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.236706] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.238859] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.239084] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.239241] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.239243] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.242028] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.242032] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.244203] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.244601] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.244750] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.244752] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.247467] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.247471] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.249395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.249660] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.249819] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.249821] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.252490] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.252493] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.254456] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.254680] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.254839] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.254841] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.257598] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [271.257601] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [271.259756] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [271.259978] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [271.260135] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [271.260138] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [271.260575] igt_reset_nop: 90 resets <6> [271.276583] i915: Running intel_hangcheck_live_selftests/igt_reset_nop_engine <6> [271.777849] igt_reset_nop_engine(rcs0): 875 resets <6> [272.278971] igt_reset_nop_engine(bcs0): 1124 resets <6> [272.779504] igt_reset_nop_engine(vcs0): 1082 resets <6> [273.280542] igt_reset_nop_engine(vecs0): 1149 resets <6> [273.295618] i915: Running intel_hangcheck_live_selftests/igt_reset_idle_engine <6> [273.796511] rcs0: Completed 4093 idle resets <6> [274.297496] bcs0: Completed 5677 idle resets <6> [274.798531] vcs0: Completed 5593 idle resets <6> [275.299420] vecs0: Completed 5846 idle resets <6> [275.299567] i915: Running intel_hangcheck_live_selftests/igt_reset_active_engine <6> [275.800796] rcs0: Completed 1014 active resets <6> [276.301440] bcs0: Completed 1355 active resets <6> [276.802588] vcs0: Completed 1348 active resets <6> [277.303559] vecs0: Completed 1343 active resets <6> [277.331567] i915: Running intel_hangcheck_live_selftests/igt_reset_fail_engine <6> [277.832791] igt_reset_fail_engine(rcs0): 1722 resets <6> [278.333839] igt_reset_fail_engine(bcs0): 1680 resets <6> [278.834642] igt_reset_fail_engine(vcs0): 1695 resets <6> [279.335574] igt_reset_fail_engine(vecs0): 1716 resets <6> [279.350567] i915: Running intel_hangcheck_live_selftests/igt_reset_engines <6> [279.851602] i915_reset_engine(rcs0:idle): 2294 resets <6> [280.352533] i915_reset_engine(bcs0:idle): 3813 resets <6> [280.853544] i915_reset_engine(vcs0:idle): 3780 resets <6> [281.354472] i915_reset_engine(vecs0:idle): 3908 resets <6> [281.855720] i915_reset_engine(rcs0:active): 858 resets <6> [282.356777] i915_reset_engine(bcs0:active): 1199 resets <6> [282.857748] i915_reset_engine(vcs0:active): 1214 resets <6> [283.358464] i915_reset_engine(vecs0:active): 1227 resets <6> [283.859469] i915_reset_engine(rcs0:others-idle): 4428 resets <6> [284.360411] i915_reset_engine(bcs0:others-idle): 5762 resets <6> [284.862457] i915_reset_engine(vcs0:others-idle): 5644 resets <6> [285.364484] i915_reset_engine(vecs0:others-idle): 5729 resets <6> [285.866599] i915_reset_engine(rcs0:others-active): 744 resets <6> [286.376608] i915_reset_engine(bcs0:others-active): 1128 resets <6> [286.878538] i915_reset_engine(vcs0:others-active): 912 resets <6> [287.384343] i915_reset_engine(vecs0:others-active): 998 resets <6> [287.886559] i915_reset_engine(rcs0:others-priority): 946 resets <6> [288.388695] i915_reset_engine(bcs0:others-priority): 1042 resets <6> [288.889591] i915_reset_engine(vcs0:others-priority): 1045 resets <6> [289.391590] i915_reset_engine(vecs0:others-priority): 1056 resets <6> [289.893857] i915_reset_engine(rcs0:self-priority): 1024 resets <6> [290.394774] i915_reset_engine(bcs0:self-priority): 1219 resets <6> [290.895614] i915_reset_engine(vcs0:self-priority): 1212 resets <6> [291.396598] i915_reset_engine(vecs0:self-priority): 1174 resets <6> [291.429578] i915: Running intel_hangcheck_live_selftests/igt_reset_engines_atomic <7> [291.429586] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [291.430832] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.430836] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.437510] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.438101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.438271] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.438274] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [291.453660] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [291.454315] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.454318] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.460509] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.460828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.460997] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.460999] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.494525] i915: Running intel_hangcheck_live_selftests/igt_reset_queue <6> [291.496504] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.496509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.499111] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.499505] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.499772] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.499776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.501144] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.501150] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.503496] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 967MHz, before = 1100MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.503856] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.504123] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.504126] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.505039] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.505045] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.507435] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 400MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.507831] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.508098] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.508101] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.508986] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.508992] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.514498] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.514902] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.515167] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.515170] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.516059] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.516065] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.518462] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.518813] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.519080] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.519099] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.520005] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.520010] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.522464] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.522815] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.523104] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.523108] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.523994] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.523999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.526463] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.526813] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.527096] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.527100] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.527983] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.527989] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.530498] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.530851] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.531120] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.531123] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.532011] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.532017] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.534486] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.534840] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.535108] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.535111] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.536007] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.536013] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.538490] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 400MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.538884] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.539153] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.539156] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.540049] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.540054] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.546456] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.546891] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.547157] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.547160] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.548047] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.548053] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.550493] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.550826] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.551104] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.551108] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.552026] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.552032] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.554462] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.554821] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.555075] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.555079] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.556012] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.556018] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.558489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.558832] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.559082] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.559086] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.560031] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.560036] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.563469] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.563911] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.564161] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.564164] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.565071] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.565080] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.567424] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.567756] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.568023] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.568027] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.568947] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.568952] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.571420] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.571791] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.572059] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.572062] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.573029] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.573034] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.575468] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.575829] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.576127] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.576131] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.577043] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.577049] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.580487] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.580905] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.581154] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.581157] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.582070] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.582076] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.584456] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.584806] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.585089] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.585092] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.585999] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.586005] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.588436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.588786] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.589054] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.589057] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.589977] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.589985] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.592442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.592806] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.593057] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.593061] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.593990] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.593996] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.597416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.597848] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.598097] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.598101] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.599040] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.599046] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.601459] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.601809] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.602076] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.602079] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.603003] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.603009] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.605399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.605753] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.606003] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.606007] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.606964] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.606969] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.609438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.609802] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.610070] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.610074] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.611018] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.611024] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.614414] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.614831] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.615080] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.615084] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.616009] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.616015] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.618462] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.618794] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.619043] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.619063] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.619967] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.619973] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.622459] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.622828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.623096] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.623100] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.624023] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.624029] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.626473] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.626818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.627068] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.627072] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.628003] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.628012] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.631454] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.631912] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.632161] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.632165] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.633070] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.633076] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.635411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.635757] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.636007] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.636027] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.636933] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.636939] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.639436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.639805] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.640074] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.640078] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.641040] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.641045] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.643413] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.643758] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.644011] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.644015] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.645118] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.645124] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.648411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.648840] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.649087] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.649091] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.650006] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.650012] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.652417] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.652750] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.653016] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.653020] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.653954] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.653960] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.656464] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.656817] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.657077] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.657080] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.657998] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.658003] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.660438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.660781] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.661041] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.661044] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.661951] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.661957] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.665456] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.665912] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.666165] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.666169] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.667064] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.667070] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.669412] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.669758] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.670025] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.670029] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.670949] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.670955] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.673402] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.673754] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.674004] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.674008] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.674930] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.674936] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.677470] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.677831] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.678100] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.678104] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.679058] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.679064] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.682486] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.682942] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.683191] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.683195] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.684108] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.684114] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.686415] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.686746] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.687012] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.687016] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.687939] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.687945] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.690461] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.690813] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.691063] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.691067] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.691985] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.691993] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.694448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.694794] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.695055] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.695059] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.695978] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.695984] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.699450] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.699898] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.700146] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.700150] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.701079] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.701085] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.703429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.703761] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.704049] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.704053] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.704975] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.704980] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.707434] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.707823] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.708077] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.708081] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.709002] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.709007] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.711411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.711772] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.712026] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.712030] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.712950] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.712956] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.716480] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.716942] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.717190] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.717194] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.718095] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.718101] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.720417] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.720749] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.721016] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.721020] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.721924] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.721930] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.724418] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.724778] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.725028] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.725032] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.725941] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.725947] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.728407] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.728753] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.729004] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.729008] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.729933] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.729939] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.733411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.733828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.734077] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.734080] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.734996] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.735002] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.737431] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.737766] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.738041] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.738045] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.738966] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.738972] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.741430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.741797] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.742049] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.742053] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.743011] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.743017] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.745484] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.745829] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.746080] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.746084] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.747023] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.747029] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.750481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.750914] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.751179] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.751183] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.752118] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.752123] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.754455] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.754806] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.755097] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.755117] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.756028] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.756034] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.758422] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.758790] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.759042] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.759045] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.759977] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.759983] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.762416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.762760] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.763010] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.763013] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.763928] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.763934] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.767411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.767828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.768076] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.768080] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.768992] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.768998] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.771436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.771780] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.772045] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.772049] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.772981] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.772987] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.775429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.775801] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.776085] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.776090] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.777003] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.777009] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.779415] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.779774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.780026] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.780030] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.780963] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.780972] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.784486] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.784943] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.785193] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.785196] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.786103] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.786109] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.788416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.788751] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.789002] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.789022] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.789933] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.789939] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.792462] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.792815] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.793076] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.793080] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.794007] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.794014] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.796476] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.796822] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.797074] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.797078] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.798018] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.798024] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.801474] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.801906] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.802154] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.802158] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.803069] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.803075] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.805459] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.805809] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.806092] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.806096] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.807058] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.807064] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.809475] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.809839] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.810092] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.810095] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.811015] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.811021] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.813412] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.813755] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.814006] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.814010] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.814931] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.814937] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.818448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.818883] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.819148] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.819152] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.820053] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.820058] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.822450] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.822801] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.823068] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.823088] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.824008] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.824014] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.826429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.826782] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.827043] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.827047] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.827986] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.827992] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.830412] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.830757] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.831006] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.831010] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.831947] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.831953] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.835481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.835914] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.836209] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.836213] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.837121] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.837127] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.839457] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.839824] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.840092] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.840096] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.841016] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.841022] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.843482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.843843] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.844095] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.844099] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.845038] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.845043] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.847467] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.847812] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.848063] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.848067] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.848999] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.849007] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.852456] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.852906] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.853155] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.853159] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.854079] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.854087] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.856411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.856742] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.857009] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.857013] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.857944] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.857949] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.860400] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.860750] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.861000] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.861004] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.861945] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.861951] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.864438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.864801] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.865068] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.865072] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.866024] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.866030] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.869499] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.869872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.870097] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.870100] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.870932] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.870938] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.873309] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.873613] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.873831] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.873834] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.874697] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.874702] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.877137] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.877479] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.877699] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.877702] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.878505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.878510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.880878] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.881203] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.881434] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.881437] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.882234] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.882239] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.884416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.884709] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.884927] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.884930] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.885759] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.885764] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.888100] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.888421] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.888652] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.888655] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.889520] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.889525] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.891879] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.892186] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.892475] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.892478] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.893279] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.893284] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.895449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.895770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.895990] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.895993] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.896811] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.896818] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.899155] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.899514] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.899736] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.899739] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.900552] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.900557] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.902957] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.903251] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.903491] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.903494] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.904310] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.904315] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.906409] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.906705] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.906923] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.906926] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.907772] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.907777] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.910097] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.910417] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.910650] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.910653] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.911476] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.911483] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.913844] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.914120] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.914325] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.914328] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.915067] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.915072] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.917370] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.917652] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.917855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.917858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.918621] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.918625] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.920969] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.921234] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.921439] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.921442] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.922207] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.922211] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.924406] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.924669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.924870] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.924873] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.925614] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.925618] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.927897] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.928170] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.928373] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.928376] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.929110] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.929114] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.931415] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.931691] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.931901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.931904] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.932681] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.932686] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.934964] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.935239] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.935442] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.935445] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.936169] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.936173] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.938377] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.938651] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.938844] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.938847] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.939590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.939597] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.941899] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.942175] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.942379] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.942395] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.943159] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.943164] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.945464] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.945738] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.945943] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.945946] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.946745] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.946749] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.949123] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.949410] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.949616] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.949618] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.950366] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.950371] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.952473] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.952750] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.952955] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.952958] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.953709] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.953714] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.956034] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.956334] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.956548] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.956551] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.957279] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.957283] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.959478] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.959761] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.959955] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.959957] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.960725] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.960729] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.963086] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.963363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.963576] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.963579] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.964339] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.964343] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.966403] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.966664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.966855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.966857] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.967626] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.967630] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.969955] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.970231] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.970452] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.970455] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.971185] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.971189] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.973447] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.973731] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.973923] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.973926] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.974681] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.974685] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.976976] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.977238] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.977441] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.977444] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.978221] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.978225] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.980407] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.980669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.980861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.980864] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.981648] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.981653] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.983943] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.984205] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.984408] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.984411] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.985190] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.985194] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.987412] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.987690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.987898] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.987901] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.988676] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.988680] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.991000] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.991277] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.991482] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.991485] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.992207] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.992212] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.994398] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.994661] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.994854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.994856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.995634] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [291.995640] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [291.997930] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [291.998194] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [291.998397] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [291.998400] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [291.998577] rcs0: Completed 123 queued resets <6> [292.000413] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.000418] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.002479] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.002763] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.002954] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.002957] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.003756] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.003761] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.006208] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.006539] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.006744] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.006747] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.007537] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.007542] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.009475] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.009738] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.009930] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.009933] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.010748] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.010753] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.013064] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.013343] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.013578] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.013582] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.014360] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.014364] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.016460] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.016722] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.016923] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.016926] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.017705] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.017712] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.020032] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.020308] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.020550] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.020553] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.021335] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.021340] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.023438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.023700] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.023891] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.023894] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.024697] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.024701] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.026994] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.027279] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.027518] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.027521] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.028270] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.028274] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.030445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.030735] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.030929] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.030932] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.031718] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.031722] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.034076] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.034363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.034593] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.034596] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.035333] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.035337] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.037399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.037672] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.037864] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.037867] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.038637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.038641] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.040918] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.041179] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.041371] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.041374] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.042149] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.042153] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.044436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.044712] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.044917] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.044920] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.045721] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.045725] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.048053] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.048331] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.048560] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.048563] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.049343] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.049347] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.051442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.051704] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.051895] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.051897] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.052690] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.052694] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.054988] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.055275] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.055512] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.055515] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.056245] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.056249] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.058444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.058725] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.058917] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.058920] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.059691] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.059695] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.061982] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.062244] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.062467] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.062470] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.063213] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.063218] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.065416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.065690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.065881] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.065884] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.066637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.066641] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.068974] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.069250] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.069487] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.069490] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.070239] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.070243] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.072476] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.072752] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.072956] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.072959] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.073754] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.073760] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.076074] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.076365] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.076592] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.076595] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.077443] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.077447] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.079471] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.079755] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.079948] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.079951] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.080851] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.080856] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.083185] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.083511] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.083703] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.083705] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.084537] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.084541] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.086862] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.087166] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.087446] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.087449] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.088201] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.088206] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.090404] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.090669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.090861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.090864] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.091617] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.091622] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.093920] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.094195] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.094430] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.094434] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.095207] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.095211] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.097457] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.097719] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.097910] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.097913] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.098692] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.098696] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.101004] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.101304] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.101523] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.101526] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.102262] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.102266] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.104416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.104694] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.104887] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.104890] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.105643] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.105648] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.108027] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.108302] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.108541] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.108544] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.109312] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.109317] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.111439] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.111699] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.111904] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.111907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.112674] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.112678] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.115025] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.115301] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.115563] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.115566] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.116327] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.116334] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.118460] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.118733] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.118926] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.118929] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.119805] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.119810] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.122093] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.122355] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.122603] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.122608] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.123415] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.123420] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.125771] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.126107] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.126301] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.126304] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.127075] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.127079] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.129335] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.129646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.129837] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.129840] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.130592] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.130597] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.132864] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.133127] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.133318] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.133321] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.134101] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.134106] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.136422] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.136697] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.136900] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.136903] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.137696] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.137700] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.140026] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.140315] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.140553] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.140556] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.141291] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.141295] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.143496] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.143754] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.143926] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.143929] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.144662] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.144668] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.146960] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.147215] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.147411] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.147414] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.148075] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.148079] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.150359] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.150646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.150829] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.150832] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.151561] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.151565] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.153834] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.154084] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.154266] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.154268] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.154995] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.154999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.157110] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.157358] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.157551] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.157553] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.158280] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.158284] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.160482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.160732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.160913] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.160916] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.161665] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.161669] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.163992] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.164241] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.164435] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.164438] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.165112] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.165116] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.167367] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.167624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.167807] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.167810] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.168488] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.168492] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.170484] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.170733] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.170916] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.170918] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.171646] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.171650] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.173933] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.174181] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.174363] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.174365] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.175048] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.175052] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.177370] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.178459] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.179320] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.179332] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.181896] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.181914] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.185139] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.186133] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.186988] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.187000] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.189571] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.189589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.192811] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.193803] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.194658] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.194670] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.197215] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.197228] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.200366] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.201096] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.201713] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.201722] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.203277] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.203286] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.206109] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.206661] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.207105] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.207111] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.208315] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.208323] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.211045] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.211505] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.211867] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.211872] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.212967] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.212973] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.215462] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.215835] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.216137] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.216141] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.217161] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.217166] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.219472] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.219800] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.220049] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.220052] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.220970] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.220975] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.223473] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.223766] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.223982] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.223985] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.224818] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.224823] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.227180] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.227456] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.227649] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.227652] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.228412] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.228417] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.230482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.230748] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.230941] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.230944] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.231725] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.231729] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.233962] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.234188] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.234350] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.234353] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.235081] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.235085] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.237352] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.237600] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.237774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.237777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.238506] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.238510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.240479] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.240719] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.240893] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.240895] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.241631] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.241635] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.243927] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.244167] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.244340] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.244342] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.245078] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.245082] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.247352] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.247603] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.247777] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.247779] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.248505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.248509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.250494] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.250734] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.250908] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.250910] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.251641] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.251644] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.253912] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.254142] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.254304] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.254306] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.255038] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.255041] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.257278] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.257526] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.257700] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.257702] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.258437] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.258441] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.260491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.260732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.260906] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.260908] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.261637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.261641] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.263887] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.264127] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.264300] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.264302] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.265014] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.265018] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.267114] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.267353] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.267536] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.267539] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.268254] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.268258] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.270491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.270730] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.270903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.270906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.271637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.271641] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.273868] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.274107] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.274279] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.274282] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.275000] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.275004] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.277113] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.277354] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.277539] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.277542] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.278265] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.278269] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.280491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.280731] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.280905] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.280907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.281630] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.281634] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.283497] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.283736] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.283909] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.283912] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.284636] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.284640] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.286818] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.287058] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.287231] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.287233] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.287957] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.287961] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.290159] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.290408] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.290582] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.290585] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.291302] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.291306] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.293501] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.293743] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.293916] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.293918] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.294658] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.294662] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.296940] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.297185] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.297357] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.297360] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.298017] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.298021] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.300111] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.300349] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.300532] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.300534] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.301181] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.301185] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.303368] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.303616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.303789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.303792] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.304510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.304514] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.306498] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.306737] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.306911] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.306914] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.307655] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.307659] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.309815] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.310054] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.310227] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.310229] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.310948] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.310952] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.313122] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.313362] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.313546] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.313549] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.314260] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.314264] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.316442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.316682] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.316855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.316858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.317587] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.317591] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.319392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.319618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.319779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.319781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.320504] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.320507] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.322436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.322674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.322848] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.322851] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.323574] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.323578] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.325787] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.326024] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.326198] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.326201] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.326918] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.326922] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.329184] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.329433] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.329608] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.329610] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.330333] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.330337] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.332458] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.332700] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.332874] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.332877] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.333609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.333612] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.335838] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.336076] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.336249] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.336251] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.336967] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.336971] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.339168] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.339420] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.339594] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.339596] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.340243] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.340247] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.342464] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.342703] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.342877] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.342879] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.343533] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.343537] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.345448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.345687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.345860] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.345862] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.346513] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.346517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.348494] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.348733] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.348906] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.348909] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.349565] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.349569] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.351488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.351728] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.351901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.351904] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.352562] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.352565] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.354436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.354675] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.354848] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.354851] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.355506] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.355510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.357484] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.357722] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.357896] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.357898] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.358545] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.358549] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.360485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.360724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.360897] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.360899] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.361555] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.361559] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.363442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.363681] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.363854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.363856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.364507] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.364510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.366484] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.366728] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.366902] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.366904] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.367638] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.367642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.369819] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.370058] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.370231] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.370233] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.370890] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.370894] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.373172] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.373426] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.373600] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.373603] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.374249] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.374253] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.376437] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.376678] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.376850] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.376852] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.377505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.377509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.379436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.379676] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.379851] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.379853] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.380576] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.380580] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.382790] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.383029] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.383201] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.383204] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.383864] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.383868] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.386166] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.386415] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.386588] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.386591] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.387236] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.387240] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.389437] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.389677] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.389850] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.389853] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.390510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.390514] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.392492] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.392733] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.392906] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.392909] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.393567] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.393570] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.395489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.395730] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.395903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.395906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.396567] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.396571] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.398433] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.398672] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.398846] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.398848] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.399506] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.399510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.401491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.401729] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.401904] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.401906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.402570] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.402573] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.404485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.404724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.404897] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.404899] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.405560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.405564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.407530] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.408608] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.409515] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.409528] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.412056] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.412075] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.415275] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.416273] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.417130] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.417157] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.418986] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.418999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.422154] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.422726] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.423172] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.423179] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.424590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.424600] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.426869] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.427375] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.427766] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.427772] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.428931] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.428939] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.431406] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.431820] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.432169] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.432173] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.433154] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.433160] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.435456] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.435831] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.436134] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.436138] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.437155] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.437160] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.439457] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.439785] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.440033] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.440037] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.440940] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.440946] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.443336] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.443638] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.443856] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.443859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.444667] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.444671] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.447019] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.447306] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.447512] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.447514] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.448242] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.448246] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.450427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.450691] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.450885] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.450888] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.451670] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.451674] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.453883] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.454111] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.454273] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.454275] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.454995] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.454999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.457114] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.457353] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.457538] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.457540] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.458260] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.458264] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.460444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.460683] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.460856] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.460859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.461591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.461595] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.463438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.463685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.463848] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.463850] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.464581] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.464585] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.466393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.466623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.466784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.466786] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.467509] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.467513] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.469439] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.469678] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.469850] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.469853] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.470583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.470587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.472745] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.472986] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.473158] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.473160] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.473890] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.473894] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.476168] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.476419] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.476592] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.476595] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.477321] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.477325] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.479449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.479677] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.479837] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.479839] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.480571] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.480575] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.482393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.482619] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.482781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.482783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.483508] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.483511] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.485445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.485688] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.485861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.485863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.486590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.486593] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.488394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.488620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.488781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.488783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.489505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.489509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.491444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.491685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.491858] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.491861] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.492593] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.492597] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.494393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.494621] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.494782] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.494784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.495508] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.495512] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.497485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.497723] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.497895] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.497898] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.498627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.498631] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.500485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.500726] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.500900] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.500902] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.501092] bcs0: Completed 141 queued resets <6> [292.502332] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.502337] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.504509] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.504740] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.504902] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.504905] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.505637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.505641] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.507916] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.508146] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.508310] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.508312] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.508976] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.508980] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.511142] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.511371] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.511552] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.511554] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.512205] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.512209] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.514524] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.514776] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.514938] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.514940] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.515669] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.515673] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.517921] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.518180] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.518354] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.518356] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.519093] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.519097] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.522456] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.522779] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.522942] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.522944] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.523668] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.523672] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.525979] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.526220] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.526425] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.526428] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.527151] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.527155] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.529355] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.529619] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.529782] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.529785] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.530513] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.530517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.532479] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.532718] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.532887] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.532891] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.533539] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.533543] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.535517] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.535747] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.535911] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.535914] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.536578] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.536582] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.538797] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.539043] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.539217] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.539219] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.539954] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.539958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.542420] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.542668] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.542830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.542833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.543485] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.543488] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.549507] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.549825] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.549996] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.549998] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.550707] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.550711] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.552942] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.553170] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.553334] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.553336] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.553995] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.553999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.556197] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.556460] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.556632] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.556635] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.557278] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.557282] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.559443] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.559684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.559857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.559859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.560587] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.560591] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.562410] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.562646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.562809] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.562812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.563464] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.563468] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.565511] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.565740] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.565903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.565905] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.566659] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.566663] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.568874] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.569115] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.569289] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.569291] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.570026] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.570029] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.572145] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.572376] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.572553] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.572556] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.573203] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.573207] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.575522] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 400MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.575838] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.576013] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.576015] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.576748] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.576752] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.582510] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.582832] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.583003] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.583006] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.583714] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.583718] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.585983] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.586232] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.586413] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.586416] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.587146] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.587149] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.589422] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.589663] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.589838] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.589840] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.590563] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.590567] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.592844] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.593090] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.593264] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.593266] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.593995] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.593999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.596118] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.596360] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.596551] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.596554] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.597291] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.597295] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.599416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.599657] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.599832] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.599834] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.600562] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.600566] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.602812] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.603053] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.603228] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.603230] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.603947] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.603951] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.606119] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.606357] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.606546] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.606549] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.607203] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.607207] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.609426] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.609667] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.609841] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.609843] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.610585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.610588] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.612454] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.612682] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.612844] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.612846] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.613505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.613508] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.615489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.615728] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.615902] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.615905] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.616633] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.616637] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.618877] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.619121] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.619295] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.619298] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.620029] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.620033] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.622117] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.622360] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.622553] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.622556] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.623298] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.623302] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.625451] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.625692] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.625866] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.625868] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.626606] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.626610] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.628783] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.629025] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.629200] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.629202] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.629930] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.629933] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.632145] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.632399] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.632574] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.632577] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.633235] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.633238] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.635436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.635679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.635855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.635857] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.636520] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.636524] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.638485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.638724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.638897] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.638900] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.639633] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.639637] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.641862] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.642101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.642275] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.642278] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.643007] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.643011] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.645115] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.645356] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.645550] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.645553] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.646200] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.646204] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.648426] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.648668] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.648842] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.648845] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.649508] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.649512] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.651491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.651739] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.651913] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.651915] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.652663] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.652666] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.654888] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.655134] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.655307] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.655309] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.655973] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.655977] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.658116] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.658357] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.658550] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.658554] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.659203] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.659206] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.661424] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.661665] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.661839] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.661842] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.662580] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.662584] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.664393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.664623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.664785] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.664788] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.665515] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.665518] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.667492] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.667733] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.667908] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.667911] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.668643] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.668647] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.670495] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.670736] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.670911] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.670913] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.671642] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.671646] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.673822] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.674063] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.674237] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.674239] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.674962] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.674966] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.677081] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.677322] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.677511] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.677515] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.678162] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.678166] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.680410] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.680656] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.680829] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.680832] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.681564] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.681568] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.683489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.683732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.683905] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.683908] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.684638] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.684642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.686862] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.687103] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.687278] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.687280] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.688009] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.688013] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.690118] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.690359] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.690553] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.690556] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.691200] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.691203] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.693372] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.693622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.693797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.693799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.694526] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.694530] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.696492] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.696720] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.696884] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.696887] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.697613] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.697616] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.699830] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.700071] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.700245] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.700247] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.700970] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.700974] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.703161] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.703427] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.703593] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.703595] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.704250] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.704253] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.706439] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.706681] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.706857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.706859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.707600] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.707603] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.709486] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.709730] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.709904] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.709906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.710631] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.710635] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.712845] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.713088] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.713262] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.713265] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.713991] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.713994] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.716076] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.716319] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.716513] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.716516] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.717163] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.717167] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.719334] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.719585] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.719759] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.719762] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.720497] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.720501] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.722441] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.722671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.722836] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.722838] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.723573] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.723577] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.725466] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.725692] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.725854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.725856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.726517] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.726521] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.728478] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.728706] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.728870] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.728872] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.729609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.729613] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.731893] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.732137] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.732310] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.732313] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.732981] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.732985] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.735115] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.735358] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.735552] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.735556] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.736206] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.736210] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.738427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.738670] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.738845] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.738847] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.739584] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.739587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.741394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.741622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.741784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.741786] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.742449] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.742453] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.744397] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.744629] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.744791] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.744793] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.745538] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.745542] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.747782] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.748027] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.748201] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.748204] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.748925] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.748929] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.752438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.752755] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.752927] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.752930] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.753578] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.753581] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.758507] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.758825] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.758998] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.759000] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.759713] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.759716] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.761890] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.762118] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.762281] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.762283] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.762940] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.762944] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.765108] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.765349] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.765534] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.765537] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.766188] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.766192] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.768431] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.768671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.768843] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.768846] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.769504] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.769508] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.771491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.771731] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.771903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.771906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.772564] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.772568] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.774446] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.774690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.774862] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.774865] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.775519] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.775523] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.777440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.777679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.777853] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.777856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.778510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.778514] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.780449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.780690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.780864] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.780866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.781524] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.781527] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.783491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.783732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.783906] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.783908] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.784571] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.784575] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.786745] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.786985] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.787158] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.787161] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.787821] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.787825] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.790119] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.790358] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.790543] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.790546] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.791201] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.791205] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.793483] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.793727] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.793901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.793903] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.794556] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.794560] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.796487] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.796728] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.796901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.796903] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.797569] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.797573] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.799392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.799632] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.799804] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.799806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.800463] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.800466] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.802439] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.802682] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.802854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.802857] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.803511] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.803515] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.805492] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.805736] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.805910] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.805912] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.806575] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.806579] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.808791] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.809030] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.809204] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.809206] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.809926] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.809930] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.812204] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.812455] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.812629] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.812632] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.813281] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.813285] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.815440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.815680] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.815853] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.815855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.816506] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.816510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.818488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.818731] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.818905] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.818907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.819576] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.819580] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.821392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.821631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.821804] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.821806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.822460] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.822463] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.824453] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.824693] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.824867] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.824870] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.825527] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.825530] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.827483] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.827722] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.827896] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.827899] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.828556] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.828560] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.830485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.830724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.830898] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.830901] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.831560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.831564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.833445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.833686] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.833858] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.833861] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.834514] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.834517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.836489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.836732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.836906] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.836908] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.837572] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.837575] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.839391] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.839631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.839803] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.839805] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.840461] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.840464] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.842446] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.842686] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.842860] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.842862] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.843514] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.843518] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.845444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.845683] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.845857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.845859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.846521] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.846524] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.848482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.848721] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.848895] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.848897] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.849558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.849562] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.851498] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.851738] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.851911] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.851914] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.852574] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.852577] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.854826] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.855071] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.855245] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.855247] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.855910] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.855914] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.858152] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.858402] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.858576] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.858578] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.859231] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.859235] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.861437] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.861678] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.861851] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.861853] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.862507] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.862511] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.864441] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.864684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.864858] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.864860] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.865512] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.865516] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.867488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.867729] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.867904] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.867907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.868567] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.868571] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.870497] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.870742] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.870916] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.870918] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.871576] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.871580] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.873392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.873630] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.873803] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.873805] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.874458] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.874462] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.876485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.876730] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.876903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.876905] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.877566] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.877569] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.879449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.879690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.879864] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.879866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.880523] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.880526] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.882433] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.882674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.882848] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.882850] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.883502] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.883506] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.885450] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.885692] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.885867] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.885869] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.886530] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.886534] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.888491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.888735] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.888909] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.888911] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.889574] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.889577] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.892510] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.892768] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.892942] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.892944] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.893670] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.893673] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.895911] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.896151] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.896324] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.896327] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.897052] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.897056] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.899109] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.899350] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.899535] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.899538] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.900187] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.900191] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.902358] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.902604] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.902777] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.902779] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.903444] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.903448] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.905483] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.905726] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.905900] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.905902] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.906567] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.906570] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.908438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.908682] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.908854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.908856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.909514] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.909517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.911441] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.911685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.911859] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.911862] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.912512] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.912516] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.914489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.914732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.914906] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.914909] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.915569] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.915573] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.917490] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.917728] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.917901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.917904] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.918566] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.918570] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.920450] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.920690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.920863] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.920866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.921518] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.921522] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.923490] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.923732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.923906] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.923908] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.924569] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.924572] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.926391] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.926630] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.926801] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.926804] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.927466] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.927470] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.929444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.929685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.929858] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.929860] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.930513] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.930517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.932444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.932684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.932857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.932859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.933583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.933586] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.935446] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.935684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.935857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.935859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.936511] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.936515] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.938434] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.938674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.938847] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.938849] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.939505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.939509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.941488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.941732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.941904] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.941907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.942570] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.942573] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.944440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.944681] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.944854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.944856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.945507] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.945510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.947440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.947685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.947859] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.947862] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.948518] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.948521] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.950491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.950736] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.950909] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.950912] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.951572] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.951575] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.954439] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.954760] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.954932] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.954934] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.955583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.955587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.960445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.960761] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.960933] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.960936] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.961585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.961588] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.963839] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.964079] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.964251] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.964253] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.964912] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.964916] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.967162] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.967412] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.967586] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.967589] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.968242] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.968245] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.970440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.970681] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.970853] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.970855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.971510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.971514] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.973448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.973689] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.973863] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.973866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.974518] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.974522] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.976442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.976684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.976858] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.976860] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.977511] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.977515] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.979455] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.979700] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.979876] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.979878] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.980539] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.980543] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.982490] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.982728] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.982901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.982904] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.983564] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.983567] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.985440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.985679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.985853] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.985855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.986507] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.986511] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.988482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.988724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.988897] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.988899] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.989555] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.989559] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.991484] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.991724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.991897] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.991899] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.992558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.992562] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.994437] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.994678] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.994852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.994855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.995512] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.995516] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [292.997481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [292.997719] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [292.997892] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [292.997895] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [292.998557] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [292.998561] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.000486] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.000724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.000896] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.000898] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.001554] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.001558] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.003835] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.004075] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.004247] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.004250] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.004432] vcs0: Completed 153 queued resets <6> [293.005622] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.005626] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.007880] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.008941] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.009889] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.009902] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.012558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.012578] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.015853] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.016877] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.017823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.017836] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.020366] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.020444] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.024171] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.024909] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.025500] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.025509] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.027333] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.027342] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.030335] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.030923] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.031345] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.031351] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.032719] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.032727] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.035475] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.035900] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.036241] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.036246] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.037431] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.037438] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.040000] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.040375] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.040727] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.040732] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.041761] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.041767] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.044094] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.044471] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.044707] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.044711] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.045618] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.045624] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.048058] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.048366] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.048604] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.048607] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.049431] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.049436] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.051477] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.051837] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.052039] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.052042] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.052814] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.052818] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.055131] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.055485] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.055665] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.055667] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.056415] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.056420] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.058485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.058713] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.058875] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.058877] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.059602] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.059606] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.061839] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.062078] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.062251] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.062253] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.062976] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.062980] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.065074] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.065313] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.065503] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.065506] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.066156] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.066160] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.068497] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.068740] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.068914] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.068917] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.069574] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.069578] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.071445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.071685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.071859] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.071861] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.072505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.072509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.074440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.074681] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.074854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.074857] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.075503] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.075507] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.077436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.077677] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.077852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.077854] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.078506] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.078509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.080489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.080729] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.080904] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.080906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.081557] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.081560] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.083441] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.083681] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.083855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.083857] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.084503] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.084507] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.086488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.086731] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.086905] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.086907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.087559] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.087563] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.089458] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.089688] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.089851] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.089854] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.090584] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.090588] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.092399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.092626] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.092788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.092790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.093451] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.093455] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.095404] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.095633] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.095796] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.095798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.096463] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.096466] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.098490] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.098720] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.098884] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.098886] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.099546] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.099550] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.101403] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.101633] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.101795] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.101797] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.102458] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.102462] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.104499] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.104740] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.104903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.104906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.105629] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.105633] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.109267] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.109599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.109761] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.109763] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.110478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.110481] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.115468] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.115774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.115934] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.115937] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.116655] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.116659] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.118967] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.119207] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.119398] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.119401] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.120113] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.120116] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.122328] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.123379] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.124252] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.124264] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.126821] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.126839] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.130162] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.131268] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.132154] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.132166] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.134762] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.134781] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.138065] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.139109] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.140035] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.140048] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.142538] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.142551] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.145525] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.146199] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.146789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.146798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.148311] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.148320] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.151115] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.151698] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.152122] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.152128] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.153330] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.153338] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.156152] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.156646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.156987] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.156991] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.158016] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.158023] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.160463] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.160855] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.161126] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.161130] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.162136] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.162141] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.164455] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.164858] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.165090] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.165093] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.165979] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.165984] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.169492] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.169848] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.170051] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.170054] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.170864] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.170868] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.173165] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.173444] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.173625] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.173628] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.174353] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.174357] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.176396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.176643] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.176823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.176826] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.177551] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.177555] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.179805] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.180068] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.180261] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.180264] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.181002] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.181006] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.183286] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.183567] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.183749] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.183751] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.184492] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.184497] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.186454] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.186711] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.186893] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.186896] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.187650] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.187654] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.189953] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.190223] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.190439] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.190443] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.191176] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.191180] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.193460] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.193791] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.193970] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.193972] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.194697] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.194701] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.197053] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.197408] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.197588] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.197591] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.198311] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.198315] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.200488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.200738] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.200919] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.200922] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.201653] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.201657] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.203963] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.204225] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.204440] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.204443] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.205177] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.205181] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.207419] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.207675] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.207855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.207858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.208604] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.208608] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.210907] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.211169] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.211361] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.211364] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.212113] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.212117] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.214396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.214645] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.214826] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.214828] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.215567] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.215571] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.217849] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.218119] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.218312] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.218314] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.219062] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.219066] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.221370] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.221646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.221838] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.221841] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.222576] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.222580] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.224857] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.225122] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.225317] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.225319] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.226064] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.226069] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.228345] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.228620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.228814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.228816] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.229547] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.229551] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.231808] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.232071] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.232264] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.232267] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.233002] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.233006] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.235261] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.235536] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.235730] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.235732] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.236494] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.236498] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.238405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.238679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.238862] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.238865] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.239606] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.239610] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.241847] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.242138] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.242349] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.242352] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.243100] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.243104] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.245331] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.245602] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.245824] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.245827] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.246579] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.246583] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.248484] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.248750] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.248932] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.248935] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.249716] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.249721] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.252083] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.252348] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.252545] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.252548] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.253325] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.253329] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.255481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.255744] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.255950] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.255953] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.256696] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.256701] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.258944] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.259195] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.259375] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.259378] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.260121] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.260125] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.262408] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.262671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.262864] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.262867] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.263606] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.263611] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.265923] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.266188] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.266398] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.266401] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.267124] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.267130] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.269457] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.269720] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.269914] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.269917] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.270669] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.270673] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.273020] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.273283] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.273490] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.273493] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.274243] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.274247] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.276481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.276746] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.276939] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.276941] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.277684] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.277688] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.279993] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.280255] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.280462] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.280464] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.281184] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.281188] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.283434] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.283698] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.283891] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.283894] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.284660] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.284664] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.286945] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.287195] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.287375] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.287378] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.288112] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.288116] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.290453] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.290717] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.290909] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.290911] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.291652] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.291657] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.293889] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.294137] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.294317] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.294320] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.295065] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.295069] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.297284] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.298372] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.299252] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.299265] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.301790] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.301810] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.305098] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.306193] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.307072] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.307085] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.309648] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.309666] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.313468] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.314529] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.315345] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.315357] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.317935] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.317954] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.321282] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.322325] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.323269] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.323282] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.325886] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.325904] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.329176] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.330227] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.331173] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.331186] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.333265] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.333278] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.336491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.337176] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.337638] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.337644] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.339041] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.339051] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.341377] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8000F0EC, count = 0, ret = 0 <7> [293.341921] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.342315] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.342319] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.343485] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.343493] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.346139] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.346599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.346940] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.346944] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.347988] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.347995] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.350464] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.350818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.351088] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.351108] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.352098] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.352104] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.354462] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.354773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.355005] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.355009] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.355911] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.355916] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.358364] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.358658] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.358861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.358863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.359667] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.359672] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.362011] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.362300] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.362505] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.362507] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.363232] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.363237] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.365413] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.365667] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.365847] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.365850] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.366595] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.366599] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.368844] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.369085] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.369258] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.369260] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.369982] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.369985] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.372073] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.372313] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.372505] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.372507] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.373168] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.373171] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.375333] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.375590] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.375753] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.375755] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.376426] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.376430] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.378470] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.378717] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.378878] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.378881] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.379546] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.379549] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.381445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.381752] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.381913] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.381916] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.382627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.382631] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.384834] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.385151] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.385323] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.385325] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.385986] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.385990] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.391510] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.391815] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.391975] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.391977] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.392699] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.392703] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.394948] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.395187] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.395361] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.395363] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.396038] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.396042] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.398254] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.398519] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.398681] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.398683] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.399347] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.399350] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.401488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.401715] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.401878] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.401880] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.402543] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.402547] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.404449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.404701] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.404862] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.404864] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.405523] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.405526] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.407487] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.407715] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.407876] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.407878] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.408544] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.408548] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.410454] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.410682] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.410845] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.410847] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.411509] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.411513] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.413483] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.413713] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.413877] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.413879] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.414604] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.414608] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.416834] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.417073] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.417247] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.417249] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.417969] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.417973] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.420115] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.420353] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.420533] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.420536] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.421175] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.421179] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.423367] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.423620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.423783] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.423785] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.424439] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.424443] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.426395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.426623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.426785] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.426787] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.427439] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.427442] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.429468] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.429694] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.429856] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.429858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.430522] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.430526] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.432485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.432730] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.432903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.432906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.433572] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.433576] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.435803] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.436043] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.436216] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.436219] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.436880] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.436884] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.439180] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.439434] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.439608] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.439610] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.440259] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.440263] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.442441] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.442687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.442859] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.442861] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.443516] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.443519] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.446451] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.446769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.446941] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.446943] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.447590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.447594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.452507] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.452826] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.452998] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.453000] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.453649] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.453653] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.455917] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.456158] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.456331] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.456333] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.456990] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.456993] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.459208] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.459458] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.459631] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.459634] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.460284] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.460288] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.462450] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.462693] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.462866] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.462868] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.463516] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.463520] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.465483] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.465727] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.465900] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.465903] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.466567] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.466571] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.468794] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.469032] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.469206] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.469208] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.469868] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.469871] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.472179] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.472431] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.472605] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.472607] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.473258] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.473262] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.475436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.475687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.475860] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.475862] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.476516] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.476519] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.478449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.478690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.478864] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.478866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.479516] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.479519] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.483506] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.483824] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.483995] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.483997] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.484710] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.484714] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.487018] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.487258] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.487471] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.487473] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.488123] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.488126] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.490340] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.490620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.490793] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.490795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.491449] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.491453] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.493513] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.493754] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.493928] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.493930] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.494590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.494594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.496406] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.496649] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.496821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.496823] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.497480] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.497483] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.499462] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.499718] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.499891] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.499893] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.500546] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.500550] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.502519] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.502836] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.503008] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.503011] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.503660] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.503664] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.505517] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.505832] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.506004] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.506006] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.506164] vecs0: Completed 128 queued resets <6> [293.532560] i915: Running intel_hangcheck_live_selftests/igt_reset_wait <6> [293.534200] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.534204] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.536492] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.536853] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.537057] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.537059] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.570583] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_ggtt <6> [293.577487] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.577509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.581626] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.582679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.583616] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.583629] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.613666] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_ppgtt <6> [293.624273] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.624294] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.627885] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.629026] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.629893] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.629906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.669654] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence <6> [293.677762] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.677783] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.681165] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.682255] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.683229] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.683241] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.716663] i915: Running intel_hangcheck_live_selftests/igt_handle_error <7> [293.753627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [293.754816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [293.755686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [293.756534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [293.757346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [293.804779] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [293.869480] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [293.927726] i915: probe of 0000:00:02.0 failed with error -25 <6> [294.119176] [IGT] i915_selftest: finished subtest hangcheck, SUCCESS

<6> [269.928697] [IGT] i915_selftest: starting dynamic subtest hangcheck

<5> [270.016310] Setting dangerous option enable_guc - tainting kernel

<5> [270.016316] Setting dangerous option live_selftests - tainting kernel

<7> [270.045127] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [270.045316] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [270.045513] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [270.045521] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP)

<7> [270.045737] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [270.045917] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [270.046039] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [270.046620] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [270.046734] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [270.046844] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [270.046954] i915 0000:00:02.0: vgaarb: deactivate vga console

<7> [270.047346] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047

<7> [270.047574] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [270.047839] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8c90a018

<7> [270.047991] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [270.048123] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [270.048253] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [270.048382] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [270.052517] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [270.052658] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [270.052792] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [270.052925] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [270.053059] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [270.053165] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [270.053267] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [270.053447] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [270.053571] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [270.053673] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [270.053776] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [270.053877] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [270.053978] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [270.054079] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [270.054474] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [270.054663] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209

<7> [270.054835] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [270.054986] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [270.055136] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [270.055284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [270.055508] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [270.055676] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [270.055825] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [270.055976] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [270.056124] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [270.056272] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [270.056475] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [270.056708] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [270.056851] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [270.056997] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [270.057142] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [270.057287] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [270.057511] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [270.057745] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [270.057888] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [270.058031] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [270.058172] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [270.058314] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9

<7> [270.058536] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [270.058768] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 10

<7> [270.058911] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [270.059054] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 10

<7> [270.059196] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [270.059339] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [270.059561] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [270.059768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [270.059941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [270.060098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [270.060245] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [270.060424] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [270.060639] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [270.060783] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [270.060966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [270.061108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [270.061250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [270.061442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [270.061683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [270.061828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [270.061971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [270.062114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [270.062279] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [270.063248] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [270.063771] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [270.064123] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [270.064289] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [270.064517] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [270.064690] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [270.064825] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [270.064959] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [270.065093] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [270.065227] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [270.065361] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [270.065590] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [270.066694] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [270.067550] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [270.067754] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [270.067906] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [270.069447] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [270.069612] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [270.069765] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [270.069915] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [270.070071] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [270.070221] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [270.070369] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [270.070593] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [270.070743] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [270.070891] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [270.071042] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [270.071222] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [270.071437] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [270.071592] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [270.071727] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [270.071861] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [270.071995] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [270.072173] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [270.072481] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [270.072627] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [270.072814] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [270.072957] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [270.073128] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [270.073269] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [270.286395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.297395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.308395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.319397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.330395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.341395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.352395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.363397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.374395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.385395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.396395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.407397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.418395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.429395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.440395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.451397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.462395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.473395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.484395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.495397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.506395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.517395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.528395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.539398] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.550395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.561395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.572395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.583397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.594395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.605395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.616395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.627397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [270.627571] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [270.627583] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [270.627642] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [270.627807] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [270.627987] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [270.628115] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [270.628405] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [270.628549] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [270.628735] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI D/PHY D] Using AUX CH D (VBT)

<7> [270.628891] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI D/PHY D]

<7> [270.629210] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [270.629342] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D/PHY D]

<7> [270.629541] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:108:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [270.629811] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:119:DDI E/PHY E] Using AUX CH A (VBT)

<7> [270.629943] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:119:DDI E/PHY E]

<7> [270.630120] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [270.630531] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [270.630751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [270.630897] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [270.631031] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [270.631164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [270.631297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [270.631526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [270.631727] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [270.631862] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [270.631997] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [270.632132] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [270.632267] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [270.632427] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [270.632643] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [270.632813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [270.632973] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST A] hw state readout: disabled, pipe A

<7> [270.633099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST B] hw state readout: disabled, pipe B

<7> [270.633226] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST C] hw state readout: disabled, pipe C

<7> [270.633358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [270.633585] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [270.633810] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [270.633946] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [270.634135] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [270.634315] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [270.634568] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [270.634776] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [270.634912] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:HDMI-A-3] hw state readout: disabled

<7> [270.635047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:120:DP-2] hw state readout: disabled

<7> [270.635174] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [270.635300] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [270.635507] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [270.635655] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [270.635794] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [270.635928] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [270.636059] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [270.636208] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [270.636350] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [270.636559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [270.636724] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [270.636851] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [270.637019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [270.637155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [270.637290] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [270.637468] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [270.637700] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [270.637829] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [270.637989] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [270.640420] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [270.640582] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [270.640690] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [270.640802] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [270.640928] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global

<7> [270.641872] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [270.642001] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [270.642124] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [270.646576] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [270.646783] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [270.646932] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [270.669173] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [270.669330] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [270.669476] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [270.669611] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [270.669744] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [270.669876] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x3e920000

<7> [270.670010] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [270.670143] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [270.670277] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [270.670418] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [270.670552] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [270.670685] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [270.670818] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [270.670951] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [270.671084] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [270.672086] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.672089] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.678521] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.679154] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.679312] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.679314] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [270.686175] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [270.686291] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [270.686403] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [270.686513] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [270.686790] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [270.687348] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [270.687493] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [270.687625] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [270.687755] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [270.687900] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [270.690949] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [270.691226] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [270.691536] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1

<7> [270.692039] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<7> [270.692296] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:HDMI-A-3] generating connector hotplug event

<7> [270.692588] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2

<7> [270.693051] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:120:DP-2] generating connector hotplug event

<6> [270.693088] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [270.694473] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [270.711958] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [270.713881] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input86

<7> [270.714574] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [270.715253] [drm:drm_client_modeset_probe]

<7> [270.715288] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [270.715219] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [270.715294] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [270.715502] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [270.715515] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [270.715521] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [270.715487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [270.715525] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [270.715673] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [270.715680] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [270.715684] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [270.715689] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [270.715709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [270.715822] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [270.715828] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [270.715832] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3]

<7> [270.715836] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [270.715966] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] status updated from unknown to disconnected

<7> [270.715973] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [270.715977] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2]

<7> [270.715915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [270.715981] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [270.716111] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] status updated from unknown to disconnected

<7> [270.716118] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected

<7> [270.716121] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [270.716124] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [270.716127] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [270.716130] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [270.716132] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [270.716134] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [270.716156] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [270.716163] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [270.716175] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [270.716182] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [270.716574] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [270.716742] [drm:drm_client_modeset_probe]

<7> [270.716769] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [270.716804] i915 device info: pciid=0x3e92 rev=0x00 platform=COFFEELAKE (subplatform=0x0) gen=9

<7> [270.716808] i915 device info: graphics version: 9

<7> [270.716810] i915 device info: media version: 9

<7> [270.716813] i915 device info: graphics stepping: **

<7> [270.716815] i915 device info: media stepping: **

<7> [270.716818] i915 device info: display stepping: **

<7> [270.716820] i915 device info: base die stepping: **

<7> [270.716822] i915 device info: gt: 2

<7> [270.716824] i915 device info: memory-regions: 0x21

<7> [270.716827] i915 device info: page-sizes: 0x11000

<7> [270.716829] i915 device info: platform: COFFEELAKE

<7> [270.716831] i915 device info: ppgtt-size: 48

<7> [270.716834] i915 device info: ppgtt-type: 2

<7> [270.716836] i915 device info: dma_mask_size: 39

<7> [270.716838] i915 device info: is_mobile: no

<7> [270.716774] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [270.716840] i915 device info: is_lp: no

<7> [270.716842] i915 device info: require_force_probe: no

<7> [270.716844] i915 device info: is_dgfx: no

<7> [270.716846] i915 device info: has_64bit_reloc: yes

<7> [270.716848] i915 device info: has_64k_pages: no

<7> [270.716850] i915 device info: gpu_reset_clobbers_display: no

<7> [270.716852] i915 device info: has_reset_engine: yes

<7> [270.716854] i915 device info: has_3d_pipeline: yes

<7> [270.716856] i915 device info: has_4tile: no

<7> [270.716858] i915 device info: has_flat_ccs: no

<7> [270.716860] i915 device info: has_global_mocs: no

<7> [270.716862] i915 device info: has_gmd_id: no

<7> [270.716864] i915 device info: has_gt_uc: yes

<7> [270.716866] i915 device info: has_heci_pxp: no

<7> [270.716867] i915 device info: has_heci_gscfi: no

<7> [270.716869] i915 device info: has_guc_deprivilege: no

<7> [270.716871] i915 device info: has_l3_ccs_read: no

<7> [270.716873] i915 device info: has_l3_dpf: no

<7> [270.716875] i915 device info: has_llc: yes

<7> [270.716877] i915 device info: has_logical_ring_contexts: yes

<7> [270.716879] i915 device info: has_logical_ring_elsq: no

<7> [270.716881] i915 device info: has_media_ratio_mode: no

<7> [270.716883] i915 device info: has_mslice_steering: no

<7> [270.716885] i915 device info: has_oa_bpc_reporting: no

<7> [270.716887] i915 device info: has_oa_slice_contrib_limits: no

<7> [270.716889] i915 device info: has_oam: no

<7> [270.716891] i915 device info: has_one_eu_per_fuse_bit: no

<7> [270.716893] i915 device info: has_pxp: no

<7> [270.716894] i915 device info: has_rc6: yes

<7> [270.716896] i915 device info: has_rc6p: no

<7> [270.716898] i915 device info: has_rps: yes

<7> [270.716900] i915 device info: has_runtime_pm: yes

<7> [270.716902] i915 device info: has_snoop: no

<7> [270.716904] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [270.716908] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [270.716917] i915 device info: has_coherent_ggtt: yes

<7> [270.716919] i915 device info: tuning_thread_rr_after_dep: no

<7> [270.716922] i915 device info: unfenced_needs_alignment: no

<7> [270.716924] i915 device info: hws_needs_physical: no

<7> [270.716926] i915 device info: has_pooled_eu: no

<7> [270.716929] i915 device info: rawclk rate: 24000 kHz

<7> [270.716931] i915 device info: display version: 9

<7> [270.716934] i915 device info: cursor_needs_physical: no

<7> [270.716936] i915 device info: has_cdclk_crawl: no

<7> [270.716938] i915 device info: has_cdclk_squash: no

<7> [270.716939] i915 device info: has_ddi: yes

<7> [270.716941] i915 device info: has_dp_mst: yes

<7> [270.716944] i915 device info: has_dsb: no

<7> [270.716946] i915 device info: has_fpga_dbg: yes

<7> [270.716948] i915 device info: has_gmch: no

<7> [270.716951] i915 device info: has_hotplug: yes

<7> [270.716953] i915 device info: has_hti: no

<7> [270.716955] i915 device info: has_ipc: yes

<7> [270.716957] i915 device info: has_overlay: no

<7> [270.716960] i915 device info: has_psr: yes

<7> [270.716962] i915 device info: has_psr_hw_tracking: yes

<7> [270.716964] i915 device info: overlay_needs_physical: no

<7> [270.716966] i915 device info: supports_tv: no

<7> [270.716968] i915 device info: has_hdcp: yes

<7> [270.716970] i915 device info: has_dmc: yes

<7> [270.716972] i915 device info: has_dsc: no

<7> [270.716975] i915 device info: iommu: disabled

<7> [270.716911] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [270.716977] i915 device info: available engines: 40403

<7> [270.716980] i915 device info: slice total: 1, mask=0001

<7> [270.716982] i915 device info: subslice total: 3

<7> [270.716984] i915 device info: slice0: 3 subslices, mask=00000007

<7> [270.716987] i915 device info: slice1: 0 subslices, mask=00000000

<7> [270.716989] i915 device info: slice2: 0 subslices, mask=00000000

<7> [270.716991] i915 device info: EU total: 24

<7> [270.716993] i915 device info: EU per subslice: 8

<7> [270.716995] i915 device info: has slice power gating: no

<7> [270.716997] i915 device info: has subslice power gating: no

<7> [270.716999] i915 device info: has EU power gating: yes

<6> [270.717001] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [270.717003] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [270.717006] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [270.717009] i915: Performing live selftests with st_random_seed=0xf31720a0 st_timeout=500

<6> [270.717012] i915: Running hangcheck

<6> [270.717036] i915: Running intel_hangcheck_live_selftests/igt_hang_sanitycheck

<7> [270.717074] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [270.717080] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [270.717087] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [270.717269] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [270.717276] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3]

<7> [270.717281] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [270.717456] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [270.717461] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2]

<7> [270.717465] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [270.717594] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected

<7> [270.717598] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [270.717601] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [270.717603] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [270.717606] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [270.717608] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [270.717611] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [270.717629] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [270.717636] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [270.717647] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [270.717653] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [270.758557] i915: Running intel_hangcheck_live_selftests/igt_reset_nop

<6> [270.762214] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.762252] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.764782] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.765247] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.765450] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.765454] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.769866] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.769870] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.772099] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.772335] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.772502] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.772504] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.775282] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.775286] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.777444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.777664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.777814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.777816] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.780671] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.780675] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.782896] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.783120] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.783277] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.783279] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.786244] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.786248] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.788451] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.788669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.788818] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.788820] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.791581] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.791585] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.793411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.793623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.793770] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.793772] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.796547] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.796551] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.798476] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.798703] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.798861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.798863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.802142] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.802146] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.804395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.804664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.804822] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.804824] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.807688] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.807692] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.809838] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.810063] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.810221] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.810223] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.813015] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.813019] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.815045] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.815282] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.815488] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.815490] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.818310] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.818314] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.820409] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.820645] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.820814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.820816] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.823798] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.823802] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.825980] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.826232] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.826451] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.826454] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.830135] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.830140] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.832481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.832723] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.832894] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.832897] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [270.835445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<6> [270.836051] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.836055] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.838294] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.838646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.838846] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.838849] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.842273] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.842278] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.844457] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.844716] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.844902] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.844905] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.848201] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.848205] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.850431] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.850702] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.850901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.850904] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.854178] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.854182] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.856415] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.856687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.856886] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.856889] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.860168] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.860173] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.862414] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.862670] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.862857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.862859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.867186] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.867191] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.869369] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.869654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.869852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.869855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.874040] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.874045] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.876479] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.876773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.876990] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.876993] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.881293] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.881298] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.883477] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.883772] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.883990] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.883993] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.887682] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.887687] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.889960] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.890253] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.890507] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.890510] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.894034] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.894039] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.896356] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.896648] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.896852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.896855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.900734] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.900740] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.903017] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.903307] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.903545] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.903548] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.907081] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.907086] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.909375] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.909714] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.909932] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.909935] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.913583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.913588] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.915853] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.916144] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.916362] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.916365] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.919956] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.919962] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.922235] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.922574] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.922791] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.922794] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.926362] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.926367] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.928406] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.928670] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.928863] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.928866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.931959] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.931963] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.934045] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.934284] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.934539] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.934541] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.937372] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.937376] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.939520] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.939744] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.939901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.939903] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.943341] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.943344] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.945404] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.945614] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.945761] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.945763] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.948793] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.948796] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.951008] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.951232] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.951469] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.951472] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.954396] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.954400] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.956447] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.956673] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.956830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.956832] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.959980] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.959984] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.962317] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.962607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.962765] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.962768] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.966299] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.966303] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.968507] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.968731] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.968889] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.968891] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.972071] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.972074] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.974374] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.974637] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.974796] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.974798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.977707] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.977711] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.979933] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.980159] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.980318] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.980320] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.983426] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.983430] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.985398] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.985610] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.985758] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.985760] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.988875] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.988879] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.991078] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.991302] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.991512] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.991516] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [270.994743] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [270.994746] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [270.996994] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [270.997219] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [270.997377] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [270.997379] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.000526] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.000529] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.002491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.002706] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.002852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.002855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.005970] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.005974] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.008305] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.008568] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.008726] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.008729] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.011537] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.011540] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.013405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.013618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.013766] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.013768] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.016812] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.016816] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.019097] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.019321] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.019527] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.019531] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.022629] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.022632] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.024752] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.024973] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.025131] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.025133] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.028491] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.028494] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.030434] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.030662] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.030819] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.030821] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.033984] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.033988] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.036319] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.036610] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.036769] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.036771] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.039657] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.039661] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.041785] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.042002] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.042150] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.042152] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.044945] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.044948] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.047059] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.047271] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.047428] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.047430] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.050071] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.050075] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.052203] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.052431] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.052615] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.052618] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.055312] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.055316] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.057405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.057623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.057771] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.057773] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.060435] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.060438] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.062402] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.062654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.062802] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.062804] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.065959] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.065962] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.068094] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.068318] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.068491] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.068494] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.071279] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.071283] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.073438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.073679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.073836] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.073839] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.076521] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.076525] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.078447] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.078671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.078831] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.078833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.081512] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.081515] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.083449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.083672] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.083830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.083832] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.086481] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.086485] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.088394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.088616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.088774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.088776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.091444] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.091447] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.093395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.093616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.093773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.093775] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.096872] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.096876] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.099205] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.099585] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.099794] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.099798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.102726] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.102729] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.105015] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.105241] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.105504] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.105506] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.108284] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.108288] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.110449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.110693] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.110852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.110854] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.113661] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.113665] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.115887] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.116113] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.116271] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.116274] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.119009] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.119013] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.121081] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.121305] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.121506] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.121508] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.124246] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.124250] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.126427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.126639] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.126788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.126790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.129480] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.129484] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.131410] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.131623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.131770] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.131772] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.134501] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.134505] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.136448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.136671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.136830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.136833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.139477] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.139480] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.141395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.141619] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.141778] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.141780] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.144368] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.144372] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.146394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.146617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.146775] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.146777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.149539] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.149543] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.151449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.151673] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.151831] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.151833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.154509] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.154513] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.156454] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.156678] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.156836] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.156838] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.159503] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.159507] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.161449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.161675] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.161833] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.161835] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.164542] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.164546] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.166531] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.166755] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.166913] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.166915] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.169715] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.169719] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.171880] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.172095] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.172242] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.172244] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.175269] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.175273] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.177446] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.177661] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.177810] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.177812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.180773] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.180779] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.182998] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.183222] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.183381] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.183394] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.186329] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.186333] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.188401] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.188638] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.188787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.188789] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.191501] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.191505] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.193442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.193664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.193822] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.193824] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.196490] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.196493] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.198395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.198617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.198774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.198776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.201458] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.201462] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.203395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.203616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.203774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.203776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.206515] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.206518] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.208448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.208671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.208829] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.208831] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.211539] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.211542] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.213448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.213673] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.213831] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.213833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.216459] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.216462] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.218394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.218617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.218775] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.218777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.221440] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.221444] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.223394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.223616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.223773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.223775] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.226507] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.226511] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.228478] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.228701] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.228859] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.228861] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.231521] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.231524] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.233537] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.233762] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.233920] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.233922] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.236702] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.236706] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.238859] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.239084] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.239241] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.239243] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.242028] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.242032] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.244203] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.244601] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.244750] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.244752] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.247467] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.247471] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.249395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.249660] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.249819] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.249821] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.252490] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.252493] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.254456] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.254680] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.254839] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.254841] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.257598] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [271.257601] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [271.259756] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [271.259978] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [271.260135] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [271.260138] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [271.260575] igt_reset_nop: 90 resets

<6> [271.276583] i915: Running intel_hangcheck_live_selftests/igt_reset_nop_engine

<6> [271.777849] igt_reset_nop_engine(rcs0): 875 resets

<6> [272.278971] igt_reset_nop_engine(bcs0): 1124 resets

<6> [272.779504] igt_reset_nop_engine(vcs0): 1082 resets

<6> [273.280542] igt_reset_nop_engine(vecs0): 1149 resets

<6> [273.295618] i915: Running intel_hangcheck_live_selftests/igt_reset_idle_engine

<6> [273.796511] rcs0: Completed 4093 idle resets

<6> [274.297496] bcs0: Completed 5677 idle resets

<6> [274.798531] vcs0: Completed 5593 idle resets

<6> [275.299420] vecs0: Completed 5846 idle resets

<6> [275.299567] i915: Running intel_hangcheck_live_selftests/igt_reset_active_engine

<6> [275.800796] rcs0: Completed 1014 active resets

<6> [276.301440] bcs0: Completed 1355 active resets

<6> [276.802588] vcs0: Completed 1348 active resets

<6> [277.303559] vecs0: Completed 1343 active resets

<6> [277.331567] i915: Running intel_hangcheck_live_selftests/igt_reset_fail_engine

<6> [277.832791] igt_reset_fail_engine(rcs0): 1722 resets

<6> [278.333839] igt_reset_fail_engine(bcs0): 1680 resets

<6> [278.834642] igt_reset_fail_engine(vcs0): 1695 resets

<6> [279.335574] igt_reset_fail_engine(vecs0): 1716 resets

<6> [279.350567] i915: Running intel_hangcheck_live_selftests/igt_reset_engines

<6> [279.851602] i915_reset_engine(rcs0:idle): 2294 resets

<6> [280.352533] i915_reset_engine(bcs0:idle): 3813 resets

<6> [280.853544] i915_reset_engine(vcs0:idle): 3780 resets

<6> [281.354472] i915_reset_engine(vecs0:idle): 3908 resets

<6> [281.855720] i915_reset_engine(rcs0:active): 858 resets

<6> [282.356777] i915_reset_engine(bcs0:active): 1199 resets

<6> [282.857748] i915_reset_engine(vcs0:active): 1214 resets

<6> [283.358464] i915_reset_engine(vecs0:active): 1227 resets

<6> [283.859469] i915_reset_engine(rcs0:others-idle): 4428 resets

<6> [284.360411] i915_reset_engine(bcs0:others-idle): 5762 resets

<6> [284.862457] i915_reset_engine(vcs0:others-idle): 5644 resets

<6> [285.364484] i915_reset_engine(vecs0:others-idle): 5729 resets

<6> [285.866599] i915_reset_engine(rcs0:others-active): 744 resets

<6> [286.376608] i915_reset_engine(bcs0:others-active): 1128 resets

<6> [286.878538] i915_reset_engine(vcs0:others-active): 912 resets

<6> [287.384343] i915_reset_engine(vecs0:others-active): 998 resets

<6> [287.886559] i915_reset_engine(rcs0:others-priority): 946 resets

<6> [288.388695] i915_reset_engine(bcs0:others-priority): 1042 resets

<6> [288.889591] i915_reset_engine(vcs0:others-priority): 1045 resets

<6> [289.391590] i915_reset_engine(vecs0:others-priority): 1056 resets

<6> [289.893857] i915_reset_engine(rcs0:self-priority): 1024 resets

<6> [290.394774] i915_reset_engine(bcs0:self-priority): 1219 resets

<6> [290.895614] i915_reset_engine(vcs0:self-priority): 1212 resets

<6> [291.396598] i915_reset_engine(vecs0:self-priority): 1174 resets

<6> [291.429578] i915: Running intel_hangcheck_live_selftests/igt_reset_engines_atomic

<7> [291.429586] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [291.430832] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.430836] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.437510] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.438101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.438271] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.438274] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [291.453660] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [291.454315] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.454318] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.460509] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.460828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.460997] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.460999] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.494525] i915: Running intel_hangcheck_live_selftests/igt_reset_queue

<6> [291.496504] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.496509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.499111] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.499505] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.499772] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.499776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.501144] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.501150] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.503496] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 967MHz, before = 1100MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.503856] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.504123] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.504126] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.505039] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.505045] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.507435] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 400MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.507831] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.508098] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.508101] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.508986] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.508992] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.514498] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.514902] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.515167] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.515170] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.516059] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.516065] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.518462] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.518813] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.519080] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.519099] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.520005] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.520010] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.522464] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.522815] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.523104] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.523108] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.523994] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.523999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.526463] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.526813] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.527096] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.527100] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.527983] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.527989] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.530498] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.530851] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.531120] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.531123] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.532011] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.532017] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.534486] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.534840] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.535108] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.535111] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.536007] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.536013] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.538490] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 400MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.538884] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.539153] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.539156] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.540049] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.540054] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.546456] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.546891] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.547157] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.547160] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.548047] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.548053] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.550493] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.550826] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.551104] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.551108] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.552026] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.552032] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.554462] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.554821] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.555075] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.555079] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.556012] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.556018] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.558489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.558832] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.559082] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.559086] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.560031] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.560036] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.563469] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.563911] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.564161] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.564164] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.565071] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.565080] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.567424] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.567756] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.568023] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.568027] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.568947] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.568952] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.571420] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.571791] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.572059] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.572062] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.573029] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.573034] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.575468] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.575829] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.576127] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.576131] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.577043] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.577049] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.580487] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.580905] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.581154] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.581157] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.582070] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.582076] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.584456] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.584806] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.585089] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.585092] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.585999] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.586005] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.588436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.588786] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.589054] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.589057] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.589977] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.589985] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.592442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.592806] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.593057] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.593061] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.593990] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.593996] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.597416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.597848] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.598097] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.598101] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.599040] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.599046] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.601459] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.601809] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.602076] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.602079] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.603003] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.603009] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.605399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.605753] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.606003] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.606007] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.606964] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.606969] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.609438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.609802] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.610070] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.610074] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.611018] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.611024] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.614414] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.614831] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.615080] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.615084] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.616009] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.616015] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.618462] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.618794] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.619043] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.619063] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.619967] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.619973] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.622459] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.622828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.623096] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.623100] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.624023] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.624029] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.626473] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.626818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.627068] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.627072] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.628003] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.628012] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.631454] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.631912] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.632161] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.632165] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.633070] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.633076] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.635411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.635757] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.636007] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.636027] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.636933] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.636939] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.639436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.639805] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.640074] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.640078] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.641040] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.641045] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.643413] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.643758] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.644011] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.644015] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.645118] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.645124] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.648411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.648840] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.649087] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.649091] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.650006] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.650012] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.652417] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.652750] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.653016] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.653020] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.653954] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.653960] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.656464] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.656817] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.657077] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.657080] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.657998] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.658003] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.660438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.660781] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.661041] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.661044] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.661951] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.661957] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.665456] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.665912] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.666165] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.666169] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.667064] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.667070] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.669412] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.669758] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.670025] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.670029] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.670949] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.670955] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.673402] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.673754] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.674004] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.674008] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.674930] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.674936] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.677470] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.677831] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.678100] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.678104] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.679058] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.679064] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.682486] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.682942] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.683191] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.683195] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.684108] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.684114] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.686415] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.686746] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.687012] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.687016] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.687939] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.687945] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.690461] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.690813] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.691063] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.691067] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.691985] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.691993] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.694448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.694794] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.695055] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.695059] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.695978] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.695984] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.699450] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.699898] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.700146] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.700150] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.701079] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.701085] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.703429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.703761] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.704049] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.704053] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.704975] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.704980] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.707434] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.707823] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.708077] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.708081] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.709002] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.709007] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.711411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.711772] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.712026] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.712030] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.712950] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.712956] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.716480] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.716942] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.717190] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.717194] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.718095] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.718101] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.720417] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.720749] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.721016] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.721020] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.721924] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.721930] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.724418] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.724778] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.725028] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.725032] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.725941] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.725947] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.728407] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.728753] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.729004] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.729008] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.729933] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.729939] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.733411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.733828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.734077] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.734080] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.734996] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.735002] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.737431] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.737766] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.738041] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.738045] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.738966] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.738972] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.741430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.741797] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.742049] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.742053] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.743011] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.743017] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.745484] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.745829] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.746080] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.746084] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.747023] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.747029] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.750481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.750914] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.751179] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.751183] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.752118] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.752123] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.754455] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.754806] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.755097] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.755117] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.756028] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.756034] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.758422] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.758790] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.759042] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.759045] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.759977] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.759983] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.762416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.762760] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.763010] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.763013] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.763928] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.763934] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.767411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.767828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.768076] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.768080] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.768992] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.768998] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.771436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.771780] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.772045] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.772049] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.772981] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.772987] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.775429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.775801] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.776085] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.776090] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.777003] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.777009] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.779415] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.779774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.780026] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.780030] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.780963] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.780972] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.784486] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.784943] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.785193] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.785196] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.786103] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.786109] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.788416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.788751] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.789002] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.789022] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.789933] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.789939] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.792462] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.792815] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.793076] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.793080] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.794007] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.794014] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.796476] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.796822] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.797074] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.797078] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.798018] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.798024] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.801474] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.801906] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.802154] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.802158] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.803069] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.803075] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.805459] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.805809] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.806092] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.806096] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.807058] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.807064] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.809475] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.809839] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.810092] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.810095] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.811015] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.811021] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.813412] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.813755] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.814006] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.814010] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.814931] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.814937] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.818448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.818883] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.819148] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.819152] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.820053] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.820058] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.822450] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.822801] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.823068] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.823088] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.824008] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.824014] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.826429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.826782] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.827043] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.827047] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.827986] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.827992] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.830412] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.830757] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.831006] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.831010] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.831947] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.831953] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.835481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.835914] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.836209] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.836213] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.837121] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.837127] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.839457] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.839824] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.840092] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.840096] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.841016] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.841022] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.843482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.843843] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.844095] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.844099] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.845038] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.845043] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.847467] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.847812] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.848063] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.848067] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.848999] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.849007] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.852456] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.852906] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.853155] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.853159] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.854079] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.854087] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.856411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.856742] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.857009] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.857013] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.857944] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.857949] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.860400] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.860750] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.861000] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.861004] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.861945] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.861951] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.864438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.864801] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.865068] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.865072] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.866024] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.866030] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.869499] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.869872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.870097] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.870100] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.870932] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.870938] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.873309] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.873613] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.873831] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.873834] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.874697] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.874702] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.877137] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.877479] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.877699] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.877702] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.878505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.878510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.880878] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.881203] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.881434] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.881437] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.882234] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.882239] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.884416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.884709] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.884927] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.884930] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.885759] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.885764] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.888100] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.888421] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.888652] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.888655] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.889520] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.889525] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.891879] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.892186] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.892475] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.892478] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.893279] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.893284] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.895449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.895770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.895990] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.895993] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.896811] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.896818] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.899155] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.899514] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.899736] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.899739] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.900552] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.900557] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.902957] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.903251] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.903491] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.903494] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.904310] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.904315] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.906409] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.906705] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.906923] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.906926] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.907772] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.907777] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.910097] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.910417] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.910650] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.910653] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.911476] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.911483] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.913844] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.914120] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.914325] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.914328] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.915067] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.915072] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.917370] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.917652] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.917855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.917858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.918621] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.918625] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.920969] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.921234] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.921439] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.921442] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.922207] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.922211] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.924406] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.924669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.924870] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.924873] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.925614] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.925618] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.927897] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.928170] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.928373] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.928376] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.929110] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.929114] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.931415] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.931691] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.931901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.931904] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.932681] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.932686] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.934964] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.935239] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.935442] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.935445] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.936169] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.936173] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.938377] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.938651] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.938844] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.938847] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.939590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.939597] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.941899] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.942175] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.942379] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.942395] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.943159] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.943164] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.945464] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.945738] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.945943] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.945946] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.946745] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.946749] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.949123] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.949410] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.949616] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.949618] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.950366] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.950371] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.952473] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.952750] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.952955] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.952958] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.953709] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.953714] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.956034] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.956334] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.956548] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.956551] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.957279] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.957283] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.959478] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.959761] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.959955] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.959957] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.960725] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.960729] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.963086] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.963363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.963576] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.963579] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.964339] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.964343] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.966403] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.966664] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.966855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.966857] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.967626] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.967630] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.969955] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.970231] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.970452] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.970455] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.971185] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.971189] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.973447] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.973731] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.973923] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.973926] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.974681] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.974685] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.976976] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.977238] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.977441] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.977444] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.978221] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.978225] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.980407] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.980669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.980861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.980864] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.981648] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.981653] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.983943] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.984205] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.984408] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.984411] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.985190] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.985194] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.987412] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.987690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.987898] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.987901] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.988676] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.988680] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.991000] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.991277] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.991482] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.991485] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.992207] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.992212] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.994398] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.994661] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.994854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.994856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.995634] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [291.995640] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [291.997930] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [291.998194] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [291.998397] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [291.998400] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [291.998577] rcs0: Completed 123 queued resets

<6> [292.000413] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.000418] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.002479] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.002763] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.002954] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.002957] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.003756] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.003761] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.006208] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.006539] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.006744] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.006747] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.007537] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.007542] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.009475] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.009738] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.009930] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.009933] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.010748] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.010753] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.013064] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.013343] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.013578] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.013582] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.014360] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.014364] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.016460] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.016722] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.016923] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.016926] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.017705] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.017712] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.020032] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.020308] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.020550] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.020553] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.021335] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.021340] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.023438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.023700] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.023891] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.023894] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.024697] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.024701] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.026994] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.027279] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.027518] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.027521] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.028270] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.028274] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.030445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.030735] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.030929] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.030932] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.031718] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.031722] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.034076] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.034363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.034593] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.034596] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.035333] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.035337] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.037399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.037672] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.037864] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.037867] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.038637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.038641] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.040918] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.041179] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.041371] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.041374] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.042149] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.042153] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.044436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.044712] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.044917] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.044920] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.045721] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.045725] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.048053] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.048331] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.048560] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.048563] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.049343] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.049347] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.051442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.051704] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.051895] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.051897] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.052690] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.052694] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.054988] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.055275] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.055512] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.055515] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.056245] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.056249] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.058444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.058725] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.058917] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.058920] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.059691] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.059695] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.061982] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.062244] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.062467] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.062470] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.063213] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.063218] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.065416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.065690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.065881] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.065884] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.066637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.066641] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.068974] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.069250] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.069487] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.069490] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.070239] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.070243] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.072476] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.072752] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.072956] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.072959] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.073754] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.073760] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.076074] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.076365] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.076592] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.076595] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.077443] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.077447] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.079471] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.079755] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.079948] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.079951] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.080851] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.080856] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.083185] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.083511] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.083703] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.083705] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.084537] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.084541] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.086862] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.087166] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.087446] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.087449] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.088201] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.088206] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.090404] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.090669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.090861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.090864] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.091617] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.091622] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.093920] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.094195] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.094430] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.094434] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.095207] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.095211] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.097457] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.097719] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.097910] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.097913] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.098692] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.098696] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.101004] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.101304] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.101523] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.101526] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.102262] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.102266] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.104416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.104694] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.104887] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.104890] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.105643] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.105648] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.108027] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.108302] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.108541] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.108544] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.109312] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.109317] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.111439] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.111699] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.111904] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.111907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.112674] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.112678] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.115025] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.115301] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.115563] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.115566] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.116327] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.116334] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.118460] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.118733] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.118926] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.118929] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.119805] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.119810] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.122093] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.122355] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.122603] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.122608] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.123415] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.123420] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.125771] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.126107] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.126301] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.126304] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.127075] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.127079] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.129335] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.129646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.129837] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.129840] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.130592] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.130597] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.132864] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.133127] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.133318] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.133321] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.134101] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.134106] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.136422] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.136697] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.136900] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.136903] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.137696] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.137700] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.140026] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.140315] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.140553] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.140556] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.141291] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.141295] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.143496] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.143754] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.143926] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.143929] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.144662] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.144668] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.146960] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.147215] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.147411] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.147414] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.148075] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.148079] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.150359] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.150646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.150829] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.150832] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.151561] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.151565] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.153834] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.154084] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.154266] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.154268] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.154995] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.154999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.157110] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.157358] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.157551] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.157553] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.158280] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.158284] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.160482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.160732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.160913] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.160916] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.161665] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.161669] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.163992] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.164241] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.164435] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.164438] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.165112] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.165116] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.167367] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.167624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.167807] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.167810] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.168488] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.168492] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.170484] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.170733] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.170916] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.170918] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.171646] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.171650] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.173933] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.174181] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.174363] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.174365] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.175048] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.175052] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.177370] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.178459] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.179320] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.179332] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.181896] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.181914] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.185139] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.186133] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.186988] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.187000] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.189571] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.189589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.192811] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.193803] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.194658] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.194670] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.197215] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.197228] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.200366] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.201096] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.201713] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.201722] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.203277] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.203286] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.206109] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.206661] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.207105] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.207111] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.208315] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.208323] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.211045] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.211505] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.211867] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.211872] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.212967] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.212973] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.215462] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.215835] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.216137] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.216141] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.217161] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.217166] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.219472] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.219800] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.220049] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.220052] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.220970] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.220975] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.223473] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.223766] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.223982] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.223985] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.224818] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.224823] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.227180] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.227456] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.227649] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.227652] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.228412] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.228417] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.230482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.230748] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.230941] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.230944] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.231725] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.231729] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.233962] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.234188] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.234350] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.234353] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.235081] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.235085] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.237352] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.237600] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.237774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.237777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.238506] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.238510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.240479] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.240719] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.240893] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.240895] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.241631] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.241635] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.243927] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.244167] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.244340] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.244342] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.245078] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.245082] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.247352] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.247603] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.247777] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.247779] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.248505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.248509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.250494] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.250734] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.250908] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.250910] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.251641] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.251644] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.253912] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.254142] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.254304] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.254306] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.255038] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.255041] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.257278] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.257526] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.257700] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.257702] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.258437] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.258441] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.260491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.260732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.260906] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.260908] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.261637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.261641] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.263887] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.264127] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.264300] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.264302] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.265014] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.265018] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.267114] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.267353] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.267536] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.267539] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.268254] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.268258] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.270491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.270730] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.270903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.270906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.271637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.271641] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.273868] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.274107] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.274279] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.274282] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.275000] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.275004] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.277113] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.277354] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.277539] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.277542] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.278265] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.278269] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.280491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.280731] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.280905] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.280907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.281630] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.281634] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.283497] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.283736] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.283909] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.283912] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.284636] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.284640] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.286818] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.287058] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.287231] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.287233] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.287957] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.287961] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.290159] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.290408] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.290582] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.290585] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.291302] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.291306] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.293501] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.293743] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.293916] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.293918] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.294658] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.294662] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.296940] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.297185] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.297357] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.297360] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.298017] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.298021] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.300111] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.300349] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.300532] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.300534] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.301181] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.301185] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.303368] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.303616] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.303789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.303792] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.304510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.304514] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.306498] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.306737] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.306911] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.306914] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.307655] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.307659] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.309815] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.310054] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.310227] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.310229] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.310948] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.310952] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.313122] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.313362] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.313546] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.313549] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.314260] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.314264] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.316442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.316682] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.316855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.316858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.317587] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.317591] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.319392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.319618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.319779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.319781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.320504] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.320507] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.322436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.322674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.322848] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.322851] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.323574] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.323578] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.325787] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.326024] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.326198] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.326201] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.326918] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.326922] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.329184] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.329433] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.329608] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.329610] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.330333] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.330337] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.332458] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.332700] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.332874] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.332877] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.333609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.333612] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.335838] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.336076] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.336249] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.336251] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.336967] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.336971] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.339168] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.339420] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.339594] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.339596] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.340243] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.340247] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.342464] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.342703] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.342877] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.342879] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.343533] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.343537] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.345448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.345687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.345860] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.345862] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.346513] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.346517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.348494] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.348733] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.348906] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.348909] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.349565] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.349569] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.351488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.351728] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.351901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.351904] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.352562] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.352565] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.354436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.354675] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.354848] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.354851] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.355506] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.355510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.357484] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.357722] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.357896] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.357898] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.358545] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.358549] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.360485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.360724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.360897] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.360899] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.361555] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.361559] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.363442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.363681] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.363854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.363856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.364507] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.364510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.366484] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.366728] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.366902] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.366904] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.367638] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.367642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.369819] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.370058] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.370231] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.370233] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.370890] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.370894] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.373172] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.373426] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.373600] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.373603] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.374249] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.374253] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.376437] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.376678] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.376850] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.376852] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.377505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.377509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.379436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.379676] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.379851] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.379853] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.380576] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.380580] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.382790] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.383029] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.383201] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.383204] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.383864] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.383868] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.386166] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.386415] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.386588] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.386591] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.387236] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.387240] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.389437] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.389677] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.389850] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.389853] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.390510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.390514] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.392492] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.392733] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.392906] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.392909] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.393567] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.393570] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.395489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.395730] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.395903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.395906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.396567] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.396571] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.398433] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.398672] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.398846] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.398848] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.399506] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.399510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.401491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.401729] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.401904] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.401906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.402570] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.402573] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.404485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.404724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.404897] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.404899] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.405560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.405564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.407530] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.408608] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.409515] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.409528] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.412056] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.412075] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.415275] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.416273] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.417130] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.417157] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.418986] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.418999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.422154] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.422726] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.423172] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.423179] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.424590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.424600] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.426869] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.427375] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.427766] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.427772] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.428931] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.428939] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.431406] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.431820] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.432169] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.432173] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.433154] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.433160] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.435456] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.435831] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.436134] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.436138] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.437155] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.437160] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.439457] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.439785] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.440033] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.440037] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.440940] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.440946] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.443336] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.443638] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.443856] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.443859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.444667] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.444671] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.447019] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.447306] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.447512] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.447514] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.448242] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.448246] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.450427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.450691] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.450885] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.450888] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.451670] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.451674] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.453883] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.454111] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.454273] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.454275] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.454995] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.454999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.457114] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.457353] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.457538] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.457540] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.458260] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.458264] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.460444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.460683] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.460856] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.460859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.461591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.461595] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.463438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.463685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.463848] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.463850] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.464581] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.464585] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.466393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.466623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.466784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.466786] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.467509] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.467513] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.469439] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.469678] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.469850] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.469853] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.470583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.470587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.472745] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.472986] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.473158] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.473160] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.473890] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.473894] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.476168] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.476419] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.476592] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.476595] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.477321] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.477325] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.479449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.479677] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.479837] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.479839] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.480571] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.480575] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.482393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.482619] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.482781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.482783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.483508] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.483511] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.485445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.485688] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.485861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.485863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.486590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.486593] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.488394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.488620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.488781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.488783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.489505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.489509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.491444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.491685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.491858] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.491861] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.492593] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.492597] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.494393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.494621] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.494782] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.494784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.495508] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.495512] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.497485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.497723] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.497895] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.497898] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.498627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.498631] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.500485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.500726] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.500900] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.500902] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.501092] bcs0: Completed 141 queued resets

<6> [292.502332] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.502337] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.504509] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.504740] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.504902] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.504905] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.505637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.505641] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.507916] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.508146] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.508310] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.508312] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.508976] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.508980] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.511142] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.511371] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.511552] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.511554] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.512205] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.512209] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.514524] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.514776] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.514938] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.514940] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.515669] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.515673] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.517921] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.518180] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.518354] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.518356] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.519093] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.519097] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.522456] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.522779] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.522942] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.522944] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.523668] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.523672] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.525979] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.526220] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.526425] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.526428] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.527151] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.527155] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.529355] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.529619] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.529782] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.529785] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.530513] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.530517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.532479] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.532718] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.532887] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.532891] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.533539] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.533543] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.535517] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.535747] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.535911] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.535914] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.536578] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.536582] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.538797] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.539043] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.539217] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.539219] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.539954] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.539958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.542420] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.542668] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.542830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.542833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.543485] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.543488] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.549507] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.549825] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.549996] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.549998] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.550707] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.550711] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.552942] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.553170] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.553334] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.553336] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.553995] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.553999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.556197] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.556460] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.556632] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.556635] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.557278] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.557282] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.559443] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.559684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.559857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.559859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.560587] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.560591] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.562410] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.562646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.562809] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.562812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.563464] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.563468] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.565511] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.565740] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.565903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.565905] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.566659] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.566663] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.568874] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.569115] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.569289] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.569291] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.570026] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.570029] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.572145] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.572376] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.572553] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.572556] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.573203] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.573207] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.575522] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 400MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.575838] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.576013] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.576015] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.576748] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.576752] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.582510] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.582832] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.583003] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.583006] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.583714] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.583718] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.585983] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.586232] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.586413] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.586416] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.587146] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.587149] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.589422] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.589663] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.589838] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.589840] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.590563] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.590567] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.592844] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.593090] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.593264] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.593266] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.593995] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.593999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.596118] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.596360] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.596551] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.596554] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.597291] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.597295] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.599416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.599657] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.599832] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.599834] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.600562] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.600566] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.602812] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.603053] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.603228] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.603230] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.603947] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.603951] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.606119] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.606357] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.606546] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.606549] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.607203] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.607207] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.609426] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.609667] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.609841] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.609843] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.610585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.610588] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.612454] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.612682] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.612844] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.612846] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.613505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.613508] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.615489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.615728] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.615902] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.615905] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.616633] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.616637] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.618877] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.619121] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.619295] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.619298] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.620029] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.620033] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.622117] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.622360] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.622553] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.622556] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.623298] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.623302] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.625451] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.625692] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.625866] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.625868] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.626606] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.626610] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.628783] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.629025] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.629200] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.629202] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.629930] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.629933] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.632145] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.632399] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.632574] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.632577] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.633235] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.633238] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.635436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.635679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.635855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.635857] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.636520] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.636524] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.638485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.638724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.638897] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.638900] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.639633] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.639637] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.641862] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.642101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.642275] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.642278] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.643007] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.643011] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.645115] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.645356] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.645550] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.645553] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.646200] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.646204] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.648426] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.648668] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.648842] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.648845] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.649508] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.649512] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.651491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.651739] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.651913] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.651915] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.652663] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.652666] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.654888] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.655134] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.655307] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.655309] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.655973] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.655977] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.658116] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.658357] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.658550] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.658554] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.659203] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.659206] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.661424] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.661665] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.661839] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.661842] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.662580] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.662584] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.664393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.664623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.664785] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.664788] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.665515] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.665518] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.667492] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.667733] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.667908] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.667911] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.668643] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.668647] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.670495] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.670736] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.670911] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.670913] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.671642] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.671646] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.673822] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.674063] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.674237] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.674239] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.674962] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.674966] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.677081] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.677322] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.677511] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.677515] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.678162] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.678166] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.680410] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.680656] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.680829] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.680832] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.681564] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.681568] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.683489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.683732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.683905] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.683908] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.684638] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.684642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.686862] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.687103] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.687278] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.687280] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.688009] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.688013] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.690118] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.690359] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.690553] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.690556] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.691200] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.691203] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.693372] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.693622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.693797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.693799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.694526] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.694530] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.696492] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.696720] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.696884] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.696887] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.697613] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.697616] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.699830] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.700071] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.700245] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.700247] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.700970] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.700974] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.703161] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.703427] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.703593] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.703595] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.704250] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.704253] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.706439] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.706681] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.706857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.706859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.707600] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.707603] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.709486] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.709730] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.709904] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.709906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.710631] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.710635] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.712845] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.713088] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.713262] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.713265] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.713991] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.713994] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.716076] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.716319] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.716513] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.716516] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.717163] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.717167] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.719334] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.719585] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.719759] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.719762] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.720497] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.720501] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.722441] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.722671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.722836] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.722838] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.723573] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.723577] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.725466] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.725692] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.725854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.725856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.726517] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.726521] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.728478] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.728706] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.728870] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.728872] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.729609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.729613] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.731893] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.732137] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.732310] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.732313] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.732981] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.732985] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.735115] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.735358] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.735552] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.735556] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.736206] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.736210] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.738427] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.738670] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.738845] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.738847] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.739584] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.739587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.741394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.741622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.741784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.741786] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.742449] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.742453] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.744397] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.744629] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.744791] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.744793] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.745538] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.745542] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.747782] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.748027] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.748201] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.748204] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.748925] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.748929] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.752438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.752755] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.752927] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.752930] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.753578] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.753581] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.758507] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.758825] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.758998] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.759000] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.759713] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.759716] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.761890] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.762118] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.762281] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.762283] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.762940] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.762944] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.765108] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.765349] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.765534] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.765537] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.766188] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.766192] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.768431] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.768671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.768843] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.768846] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.769504] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.769508] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.771491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.771731] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.771903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.771906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.772564] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.772568] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.774446] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.774690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.774862] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.774865] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.775519] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.775523] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.777440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.777679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.777853] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.777856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.778510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.778514] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.780449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.780690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.780864] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.780866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.781524] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.781527] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.783491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.783732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.783906] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.783908] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.784571] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.784575] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.786745] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.786985] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.787158] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.787161] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.787821] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.787825] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.790119] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.790358] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.790543] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.790546] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.791201] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.791205] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.793483] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.793727] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.793901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.793903] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.794556] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.794560] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.796487] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.796728] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.796901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.796903] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.797569] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.797573] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.799392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.799632] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.799804] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.799806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.800463] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.800466] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.802439] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.802682] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.802854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.802857] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.803511] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.803515] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.805492] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.805736] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.805910] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.805912] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.806575] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.806579] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.808791] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.809030] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.809204] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.809206] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.809926] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.809930] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.812204] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.812455] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.812629] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.812632] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.813281] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.813285] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.815440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.815680] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.815853] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.815855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.816506] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.816510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.818488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.818731] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.818905] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.818907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.819576] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.819580] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.821392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.821631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.821804] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.821806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.822460] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.822463] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.824453] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.824693] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.824867] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.824870] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.825527] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.825530] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.827483] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.827722] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.827896] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.827899] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.828556] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.828560] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.830485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.830724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.830898] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.830901] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.831560] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.831564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.833445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.833686] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.833858] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.833861] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.834514] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.834517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.836489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.836732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.836906] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.836908] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.837572] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.837575] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.839391] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.839631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.839803] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.839805] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.840461] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.840464] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.842446] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.842686] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.842860] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.842862] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.843514] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.843518] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.845444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.845683] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.845857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.845859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.846521] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.846524] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.848482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.848721] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.848895] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.848897] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.849558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.849562] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.851498] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.851738] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.851911] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.851914] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.852574] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.852577] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.854826] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.855071] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.855245] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.855247] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.855910] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.855914] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.858152] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.858402] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.858576] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.858578] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.859231] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.859235] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.861437] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.861678] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.861851] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.861853] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.862507] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.862511] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.864441] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.864684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.864858] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.864860] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.865512] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.865516] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.867488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.867729] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.867904] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.867907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.868567] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.868571] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.870497] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.870742] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.870916] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.870918] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.871576] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.871580] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.873392] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.873630] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.873803] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.873805] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.874458] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.874462] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.876485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.876730] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.876903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.876905] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.877566] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.877569] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.879449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.879690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.879864] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.879866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.880523] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.880526] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.882433] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.882674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.882848] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.882850] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.883502] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.883506] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.885450] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.885692] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.885867] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.885869] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.886530] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.886534] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.888491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.888735] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.888909] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.888911] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.889574] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.889577] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.892510] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.892768] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.892942] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.892944] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.893670] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.893673] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.895911] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.896151] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.896324] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.896327] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.897052] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.897056] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.899109] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.899350] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.899535] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.899538] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.900187] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.900191] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.902358] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.902604] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.902777] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.902779] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.903444] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.903448] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.905483] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.905726] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.905900] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.905902] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.906567] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.906570] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.908438] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.908682] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.908854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.908856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.909514] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.909517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.911441] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.911685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.911859] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.911862] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.912512] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.912516] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.914489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.914732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.914906] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.914909] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.915569] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.915573] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.917490] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.917728] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.917901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.917904] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.918566] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.918570] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.920450] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.920690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.920863] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.920866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.921518] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.921522] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.923490] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.923732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.923906] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.923908] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.924569] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.924572] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.926391] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.926630] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.926801] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.926804] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.927466] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.927470] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.929444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.929685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.929858] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.929860] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.930513] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.930517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.932444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.932684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.932857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.932859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.933583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.933586] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.935446] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.935684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.935857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.935859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.936511] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.936515] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.938434] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.938674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.938847] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.938849] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.939505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.939509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.941488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.941732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.941904] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.941907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.942570] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.942573] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.944440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.944681] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.944854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.944856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.945507] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.945510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.947440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.947685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.947859] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.947862] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.948518] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.948521] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.950491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.950736] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.950909] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.950912] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.951572] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.951575] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.954439] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.954760] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.954932] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.954934] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.955583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.955587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.960445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.960761] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.960933] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.960936] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.961585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.961588] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.963839] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.964079] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.964251] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.964253] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.964912] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.964916] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.967162] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.967412] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.967586] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.967589] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.968242] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.968245] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.970440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.970681] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.970853] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.970855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.971510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.971514] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.973448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.973689] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.973863] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.973866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.974518] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.974522] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.976442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.976684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.976858] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.976860] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.977511] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.977515] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.979455] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.979700] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.979876] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.979878] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.980539] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.980543] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.982490] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.982728] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.982901] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.982904] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.983564] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.983567] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.985440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.985679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.985853] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.985855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.986507] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.986511] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.988482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.988724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.988897] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.988899] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.989555] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.989559] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.991484] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.991724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.991897] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.991899] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.992558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.992562] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.994437] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.994678] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.994852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.994855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.995512] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.995516] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [292.997481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [292.997719] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [292.997892] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [292.997895] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [292.998557] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [292.998561] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.000486] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.000724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.000896] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.000898] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.001554] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.001558] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.003835] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.004075] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.004247] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.004250] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.004432] vcs0: Completed 153 queued resets

<6> [293.005622] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.005626] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.007880] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.008941] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.009889] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.009902] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.012558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.012578] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.015853] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.016877] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.017823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.017836] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.020366] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.020444] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.024171] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.024909] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.025500] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.025509] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.027333] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.027342] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.030335] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.030923] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.031345] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.031351] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.032719] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.032727] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.035475] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.035900] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.036241] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.036246] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.037431] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.037438] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.040000] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.040375] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.040727] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.040732] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.041761] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.041767] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.044094] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.044471] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.044707] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.044711] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.045618] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.045624] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.048058] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.048366] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.048604] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.048607] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.049431] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.049436] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.051477] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.051837] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.052039] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.052042] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.052814] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.052818] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.055131] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.055485] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.055665] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.055667] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.056415] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.056420] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.058485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.058713] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.058875] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.058877] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.059602] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.059606] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.061839] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.062078] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.062251] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.062253] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.062976] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.062980] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.065074] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.065313] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.065503] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.065506] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.066156] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.066160] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.068497] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.068740] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.068914] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.068917] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.069574] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.069578] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.071445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.071685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.071859] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.071861] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.072505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.072509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.074440] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.074681] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.074854] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.074857] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.075503] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.075507] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.077436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.077677] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.077852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.077854] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.078506] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.078509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.080489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.080729] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.080904] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.080906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.081557] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.081560] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.083441] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.083681] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.083855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.083857] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.084503] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.084507] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.086488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.086731] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.086905] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.086907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.087559] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.087563] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.089458] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.089688] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.089851] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.089854] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.090584] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.090588] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.092399] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.092626] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.092788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.092790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.093451] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.093455] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.095404] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.095633] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.095796] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.095798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.096463] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.096466] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.098490] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.098720] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.098884] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.098886] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.099546] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.099550] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.101403] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.101633] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.101795] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.101797] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.102458] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.102462] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.104499] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.104740] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.104903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.104906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.105629] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.105633] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.109267] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.109599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.109761] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.109763] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.110478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.110481] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.115468] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.115774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.115934] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.115937] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.116655] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.116659] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.118967] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.119207] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.119398] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.119401] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.120113] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.120116] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.122328] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.123379] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.124252] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.124264] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.126821] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.126839] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.130162] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.131268] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.132154] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.132166] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.134762] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.134781] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.138065] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.139109] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.140035] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.140048] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.142538] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.142551] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.145525] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.146199] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.146789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.146798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.148311] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.148320] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.151115] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.151698] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.152122] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.152128] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.153330] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.153338] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.156152] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.156646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.156987] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.156991] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.158016] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.158023] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.160463] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.160855] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.161126] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.161130] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.162136] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.162141] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.164455] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.164858] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.165090] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.165093] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.165979] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.165984] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.169492] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.169848] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.170051] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.170054] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.170864] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.170868] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.173165] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.173444] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.173625] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.173628] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.174353] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.174357] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.176396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.176643] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.176823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.176826] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.177551] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.177555] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.179805] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.180068] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.180261] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.180264] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.181002] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.181006] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.183286] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.183567] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.183749] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.183751] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.184492] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.184497] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.186454] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.186711] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.186893] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.186896] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.187650] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.187654] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.189953] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.190223] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.190439] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.190443] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.191176] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.191180] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.193460] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.193791] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.193970] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.193972] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.194697] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.194701] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.197053] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.197408] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.197588] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.197591] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.198311] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.198315] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.200488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.200738] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.200919] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.200922] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.201653] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.201657] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.203963] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.204225] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.204440] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.204443] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.205177] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.205181] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.207419] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.207675] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.207855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.207858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.208604] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.208608] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.210907] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.211169] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.211361] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.211364] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.212113] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.212117] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.214396] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.214645] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.214826] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.214828] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.215567] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.215571] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.217849] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.218119] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.218312] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.218314] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.219062] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.219066] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.221370] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.221646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.221838] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.221841] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.222576] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.222580] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.224857] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.225122] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.225317] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.225319] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.226064] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.226069] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.228345] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.228620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.228814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.228816] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.229547] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.229551] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.231808] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.232071] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.232264] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.232267] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.233002] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.233006] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.235261] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.235536] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.235730] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.235732] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.236494] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.236498] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.238405] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.238679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.238862] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.238865] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.239606] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.239610] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.241847] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.242138] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.242349] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.242352] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.243100] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.243104] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.245331] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.245602] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.245824] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.245827] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.246579] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.246583] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.248484] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.248750] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.248932] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.248935] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.249716] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.249721] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.252083] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.252348] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.252545] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.252548] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.253325] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.253329] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.255481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.255744] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.255950] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.255953] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.256696] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.256701] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.258944] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.259195] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.259375] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.259378] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.260121] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.260125] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.262408] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.262671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.262864] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.262867] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.263606] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.263611] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.265923] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.266188] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.266398] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.266401] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.267124] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.267130] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.269457] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.269720] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.269914] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.269917] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.270669] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.270673] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.273020] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.273283] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.273490] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.273493] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.274243] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.274247] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.276481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.276746] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.276939] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.276941] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.277684] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.277688] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.279993] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.280255] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.280462] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.280464] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.281184] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.281188] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.283434] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.283698] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.283891] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.283894] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.284660] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.284664] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.286945] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.287195] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.287375] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.287378] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.288112] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.288116] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.290453] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.290717] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.290909] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.290911] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.291652] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.291657] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.293889] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.294137] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.294317] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.294320] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.295065] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.295069] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.297284] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.298372] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.299252] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.299265] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.301790] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.301810] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.305098] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.306193] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.307072] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.307085] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.309648] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.309666] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.313468] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.314529] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.315345] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.315357] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.317935] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.317954] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.321282] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.322325] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.323269] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.323282] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.325886] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.325904] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.329176] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.330227] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.331173] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.331186] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.333265] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.333278] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.336491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.337176] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.337638] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.337644] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.339041] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.339051] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.341377] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8000F0EC, count = 0, ret = 0

<7> [293.341921] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.342315] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.342319] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.343485] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.343493] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.346139] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.346599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.346940] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.346944] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.347988] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.347995] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.350464] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.350818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.351088] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.351108] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.352098] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.352104] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.354462] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.354773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.355005] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.355009] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.355911] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.355916] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.358364] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.358658] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.358861] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.358863] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.359667] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.359672] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.362011] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.362300] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.362505] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.362507] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.363232] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.363237] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.365413] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.365667] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.365847] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.365850] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.366595] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.366599] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.368844] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.369085] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.369258] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.369260] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.369982] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.369985] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.372073] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.372313] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.372505] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.372507] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.373168] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.373171] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.375333] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.375590] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.375753] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.375755] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.376426] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.376430] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.378470] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.378717] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.378878] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.378881] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.379546] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.379549] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.381445] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.381752] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.381913] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.381916] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.382627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.382631] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.384834] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.385151] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.385323] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.385325] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.385986] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.385990] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.391510] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.391815] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.391975] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.391977] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.392699] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.392703] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.394948] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.395187] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.395361] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.395363] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.396038] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.396042] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.398254] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.398519] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.398681] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.398683] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.399347] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.399350] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.401488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.401715] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.401878] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.401880] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.402543] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.402547] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.404449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.404701] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.404862] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.404864] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.405523] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.405526] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.407487] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.407715] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.407876] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.407878] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.408544] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.408548] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.410454] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.410682] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.410845] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.410847] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.411509] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.411513] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.413483] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.413713] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.413877] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.413879] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.414604] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.414608] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.416834] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.417073] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.417247] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.417249] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.417969] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.417973] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.420115] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.420353] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.420533] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.420536] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.421175] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.421179] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.423367] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.423620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.423783] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.423785] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.424439] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.424443] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.426395] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.426623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.426785] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.426787] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.427439] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.427442] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.429468] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.429694] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.429856] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.429858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.430522] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.430526] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.432485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.432730] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.432903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.432906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.433572] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.433576] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.435803] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.436043] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.436216] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.436219] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.436880] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.436884] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.439180] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.439434] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.439608] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.439610] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.440259] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.440263] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.442441] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.442687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.442859] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.442861] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.443516] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.443519] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.446451] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.446769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.446941] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.446943] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.447590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.447594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.452507] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.452826] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.452998] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.453000] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.453649] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.453653] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.455917] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.456158] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.456331] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.456333] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.456990] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.456993] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.459208] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.459458] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.459631] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.459634] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.460284] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.460288] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.462450] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.462693] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.462866] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.462868] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.463516] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.463520] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.465483] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.465727] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.465900] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.465903] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.466567] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.466571] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.468794] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.469032] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.469206] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.469208] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.469868] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.469871] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.472179] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.472431] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.472605] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.472607] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.473258] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.473262] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.475436] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.475687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.475860] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.475862] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.476516] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.476519] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.478449] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.478690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.478864] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.478866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.479516] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.479519] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.483506] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.483824] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.483995] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.483997] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.484710] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.484714] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.487018] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.487258] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.487471] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.487473] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.488123] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.488126] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.490340] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.490620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.490793] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.490795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.491449] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.491453] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.493513] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.493754] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.493928] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.493930] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.494590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.494594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.496406] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.496649] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.496821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.496823] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.497480] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.497483] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.499462] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.499718] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.499891] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.499893] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.500546] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.500550] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.502519] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.502836] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.503008] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.503011] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.503660] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.503664] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.505517] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.505832] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.506004] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.506006] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.506164] vecs0: Completed 128 queued resets

<6> [293.532560] i915: Running intel_hangcheck_live_selftests/igt_reset_wait

<6> [293.534200] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.534204] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.536492] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.536853] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.537057] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.537059] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.570583] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_ggtt

<6> [293.577487] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.577509] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.581626] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.582679] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.583616] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.583629] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.613666] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_ppgtt

<6> [293.624273] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.624294] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.627885] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.629026] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.629893] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.629906] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.669654] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence

<6> [293.677762] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.677783] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.681165] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.682255] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.683229] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.683241] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.716663] i915: Running intel_hangcheck_live_selftests/igt_handle_error

<7> [293.753627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [293.754816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [293.755686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [293.756534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [293.757346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [293.804779] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [293.869480] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [293.927726] i915: probe of 0000:00:02.0 failed with error -25

<6> [294.119176] [IGT] i915_selftest: finished subtest hangcheck, SUCCESS

Results for igt@i915_selftest@live@hangcheck