Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.28-g08e87a32f (x86_64) (Linux: 6.6.0-rc6-linus-v6.6-rc6-g58720809f527+ x86_64)
Out 
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.609s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.609s)
Dmesg
<6> [108.868245] Console: switching to colour dummy device 80x25
<6> [108.868324] [IGT] kms_force_connector_basic: executing
<7> [108.872346] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [108.873175] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [108.873441] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [108.874266] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [108.874276] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [108.874284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [108.874500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [108.925865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [108.945816] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.945833] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [108.946187] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [108.965536] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [108.965546] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [108.965827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [108.966151] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [108.966225] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [108.966233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [108.966447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.017867] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [109.036730] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.036747] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [109.037098] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [109.055337] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.055347] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [109.055583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [109.055881] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [109.055965] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [109.055976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [109.056256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.107863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [109.127247] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.127263] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [109.127613] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [109.145889] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.145899] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [109.146129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [109.146363] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<6> [109.146464] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [109.146783] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [109.146795] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [109.146806] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [109.147112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.198867] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [109.218812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.218842] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [109.219189] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [109.238512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.238527] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [109.238760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [109.239064] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from disconnected to connected
<7> [109.239189] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [109.239196] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [109.239204] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [109.239211] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [109.239217] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [109.239223] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [109.239290] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [109.239297] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [109.239512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.290862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [109.308568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.308594] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [109.308931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [109.327856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.327872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [109.328089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [109.328431] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [109.328438] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [109.328446] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [109.328452] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [109.328458] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [109.328464] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [109.328823] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:114:HDMI-A-1] EDID override set
<7> [109.328868] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [109.328879] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [109.329214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.329593] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD monitor IGT
<7> [109.329604] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD size 24, SAD count 0
<7> [109.380866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [109.399068] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [109.399094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [109.399596] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [109.399608] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [109.399618] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [109.399626] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [109.399637] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [109.399674] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [109.399688] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [109.399698] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [109.399708] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [109.399718] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [109.399729] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [109.400117] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:114:HDMI-A-1] EDID override set
<7> [109.400185] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [109.400198] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [109.400614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.401095] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD monitor IGT
<7> [109.401109] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD size 24, SAD count 0
<7> [109.401121] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:114:HDMI-A-1] EDID changed, epoch counter 4
<7> [109.452865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [109.471681] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [109.471710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [109.472278] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [109.472293] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [109.472306] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [109.472315] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [109.472324] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [109.472333] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [109.472341] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [109.472350] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [109.472618] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:114:HDMI-A-1] EDID override reset
<7> [109.472713] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [109.472727] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [109.473216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.524872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [109.548140] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.548179] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [109.548755] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [109.569573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.569587] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [109.569833] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:114:HDMI-A-1] EDID changed, epoch counter 5
<7> [109.569857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [109.570374] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [109.570387] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [109.570401] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [109.570412] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [109.570426] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [109.570435] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [109.570444] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [109.570454] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [109.570463] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [109.570472] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [109.570851] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [109.570864] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [109.570877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [109.571225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.622865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [109.641599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.641613] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [109.641966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [109.661942] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.661951] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [109.662164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [109.662377] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from connected to disconnected
<7> [109.662395] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [109.662482] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [109.662489] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [109.662714] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.713862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [109.733172] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.733189] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [109.733597] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [109.754770] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.754780] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [109.755049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [109.755348] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<6> [109.755539] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [109.755830] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [109.756581] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:DP-1] EDID override reset
<7> [109.756620] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [109.756630] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [109.756981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.757692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [109.758327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [109.759028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [109.759940] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [109.760211] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [109.761312] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [109.762917] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [109.764534] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [109.766156] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [109.767929] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [109.769691] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [109.771440] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [109.773219] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [109.774686] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [109.775597] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [109.776585] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [109.777269] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [109.777783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [109.778043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [109.778265] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [109.778535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [109.779222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [109.779464] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [109.779640] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:108:DP-2] EDID override reset
<7> [109.779691] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]
<7> [109.779701] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [109.779926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.780455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [109.780717] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected
<7> [109.781011] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [109.781022] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [109.781033] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [109.781324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.832863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [109.853838] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.853854] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [109.854198] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [109.874114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.874122] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [109.874313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [109.874527] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [109.874593] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [109.874601] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [109.874822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.925866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [109.944138] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.944151] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [109.944456] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [109.963260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [109.963268] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [109.963457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [109.963698] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [109.963929] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:114:HDMI-A-1] EDID override reset
<7> [109.963970] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [109.963980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [109.964274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [110.015862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [110.034601] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [110.034615] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [110.034943] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [110.053313] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [110.053320] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [110.053511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [110.053758] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<6> [110.054442] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [110.054713] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [110.054724] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [110.054736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [110.055041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [110.106863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [110.126248] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [110.126262] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [110.126565] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [110.146439] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [110.146446] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [110.146637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [110.146885] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [110.147336] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [110.148351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [110.148678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [110.149280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [110.150166] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [110.150175] [drm:drm_client_modeset_probe]
<7> [110.150243] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [110.150256] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [110.150580] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [110.151406] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [110.151626] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [110.152661] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [110.154308] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [110.155898] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [110.157596] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [110.159384] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [110.161189] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [110.162987] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [110.164684] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [110.166447] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [110.167332] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [110.168199] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [110.168894] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [110.169546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [110.169879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [110.170149] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [110.170352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [110.171040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [110.171346] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [110.171361] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]
<7> [110.171371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [110.171575] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [110.172140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [110.172432] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected
<7> [110.172443] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [110.172454] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [110.172747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [110.223863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [110.244270] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [110.244286] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [110.244636] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [110.263494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [110.263503] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [110.263795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [110.264099] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [110.264108] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [110.264115] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [110.264120] [drm:drm_client_modeset_probe] connector 108 enabled? no
<7> [110.264124] [drm:drm_client_modeset_probe] connector 114 enabled? no
<7> [110.264168] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [110.264181] [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [110.264746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [110.265040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [110.265696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<6> [110.267811] Console: switching to colour frame buffer device 128x48
Created at 2023-10-15 23:44:09