igt@kms_pm_rpm@basic-pci-d3-state on bat-adlp-9@linus-v6.6-rc6 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-g08e87a32f (x86_64) (Linux: 6.6.0-rc6-linus-v6.6-rc6-g58720809f527+ x86_64)
Out	Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 3 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x92/0xc0 set_property_atomic+0x87/0x160 drm_mode_obj_set_property_ioctl+0xc0/0x110 drm_ioctl_kernel+0xb4/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_gt_handle_error+0x2b8/0x420 [i915] intel_gt_debugfs_reset_store+0x5c/0xc0 [i915] i915_wedged_set+0x1d/0x40 [i915] simple_attr_write_xsigned.constprop.0+0xb4/0x110 full_proxy_write+0x58/0x80 Wakeref count: 3 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_atomic_commit_tail+0xa2e/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1e9/0x740 drm_ioctl_kernel+0xb4/0x150 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] i915_audio_component_get_power+0x19/0x110 [i915] i915_audio_component_codec_wake_override+0x39/0xf0 [i915] snd_hdac_set_codec_wakeup+0x31/0x90 [snd_hda_core] snd_hdac_display_power+0x9a/0x120 [snd_hda_core] __azx_runtime_resume+0x18/0xe0 [snd_hda_intel] azx_runtime_resume+0x3c/0xd0 [snd_hda_intel] Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] i915_audio_component_get_power+0x19/0x110 [i915] snd_hdac_display_power+0x7d/0x120 [snd_hda_core] __azx_runtime_resume+0x18/0xe0 [snd_hda_intel] azx_runtime_resume+0x3c/0xd0 [snd_hda_intel] __rpm_callback+0x3c/0x110 rpm_callback+0x58/0x70 Starting subtest: basic-pci-d3-state Subtest basic-pci-d3-state: SUCCESS (7.893s)
Err	Starting subtest: basic-pci-d3-state Subtest basic-pci-d3-state: SUCCESS (7.893s)
Dmesg	<6> [139.942596] Console: switching to colour dummy device 80x25 <6> [139.942925] [IGT] kms_pm_rpm: executing <7> [139.945294] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [139.951339] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] <7> [139.951346] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [140.003882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [140.013437] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [140.013445] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.013549] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [140.020582] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [140.020585] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [140.020670] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected <7> [140.021130] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] <7> [140.021134] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [140.021285] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected <7> [140.021607] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] <7> [140.021610] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [140.021733] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected <7> [140.022080] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] <7> [140.022083] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [140.022233] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected <7> [140.022552] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] <7> [140.022554] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [140.022705] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected <7> [140.023191] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] <7> [140.023197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [140.028033] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [140.028047] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [140.029358] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [140.033372] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [140.033385] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [140.034765] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [140.036198] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.037752] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [140.039267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [140.039368] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [140.039466] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [140.039567] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [140.059237] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [140.059244] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [140.059247] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [140.059250] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [140.059262] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [140.059353] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [140.060728] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.060817] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [140.062436] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] probed modes : <7> [140.062439] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9 <7> [140.062443] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9 <7> [140.062445] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9 <7> [140.062448] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [140.062450] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [140.062452] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [140.062455] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [140.062457] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [140.062459] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [140.062462] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81768 1152 1216 1336 1520 864 867 871 897 0x0 0x6 <7> [140.062464] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [140.062466] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [140.062469] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [140.062471] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [140.062473] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [140.062476] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa <7> [140.062478] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa <7> [140.062480] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [140.062482] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [140.062485] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [140.062506] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] <7> [140.062509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [140.115108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [140.124147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [140.124157] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.124335] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [140.131548] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [140.131551] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [140.131634] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected <7> [140.131664] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] <7> [140.131668] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [140.131815] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected <7> [140.131828] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] <7> [140.131831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [140.131950] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected <7> [140.131961] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] <7> [140.131963] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [140.132093] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected <7> [140.132104] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] <7> [140.132107] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [140.132238] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected <7> [140.132265] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] <7> [140.132270] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [140.137376] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [140.137394] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [140.138788] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [140.143038] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [140.143051] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [140.144495] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [140.145934] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.147474] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [140.148989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [140.149109] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [140.149212] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [140.149313] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [140.168927] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [140.168934] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [140.168937] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [140.168941] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [140.168951] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [140.169053] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [140.170525] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.170614] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [140.172175] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] probed modes : <7> [140.172178] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9 <7> [140.172182] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9 <7> [140.172185] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9 <7> [140.172187] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [140.172189] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [140.172192] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [140.172194] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [140.172196] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [140.172199] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [140.172201] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81768 1152 1216 1336 1520 864 867 871 897 0x0 0x6 <7> [140.172203] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [140.172206] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [140.172208] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [140.172210] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [140.172213] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [140.172215] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa <7> [140.172217] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa <7> [140.172219] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [140.172222] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [140.172224] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [140.172290] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] <7> [140.172294] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [140.222792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [140.232722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [140.232748] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.233278] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [140.240988] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [140.240992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [140.241098] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected <7> [140.241195] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] <7> [140.241200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [140.241360] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected <7> [140.241409] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] <7> [140.241412] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [140.241545] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected <7> [140.241592] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] <7> [140.241595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [140.241724] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected <7> [140.241765] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] <7> [140.241768] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [140.241895] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected <7> [140.242136] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:293] <7> [141.271312] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [141.271754] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [141.272877] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [141.273806] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [141.274331] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [141.274445] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7766016/8388608 link 517734/524288, found tu 0, data 0/0 link 0/0) <7> [141.274559] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000) <7> [141.274672] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [141.274775] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0) <7> [141.274876] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0) <7> [141.274979] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0) <7> [141.275097] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0) <7> [141.275207] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0) <7> [141.275310] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0) <7> [141.275418] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0) <7> [141.275529] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2222, found 0) <7> [141.275632] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2160, found 0) <7> [141.275733] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2222, found 0) <7> [141.275832] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2214, found 0) <7> [141.275936] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2219, found 0) <7> [141.276059] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0) <7> [141.276169] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0) <7> [141.276278] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0) <7> [141.276391] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0) <7> [141.276492] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0) <7> [141.276592] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0) <7> [141.276696] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0) <7> [141.276799] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2222, found 0) <7> [141.276901] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2160, found 0) <7> [141.277002] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2222, found 0) <7> [141.277119] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2214, found 0) <7> [141.277223] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2219, found 0) <7> [141.277328] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [141.277438] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [141.277543] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [141.277644] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in has_audio (expected yes, found no) <7> [141.277744] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer <7> [141.277847] expected: 10 00 07 00 69 14 00 01 00 00 00 00 00 00 00 00 <7> [141.277848] expected: 1e 6d 07 77 4c 47 20 48 44 52 20 34 4b 09 07 07 <7> [141.277849] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.277850] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.277852] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [141.277956] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 533250, found 0) <7> [141.278071] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 533250, found 0) <7> [141.278179] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [141.278287] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.vmin (expected 2221, found 0) <7> [141.278398] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.vmax (expected 3332, found 0) <7> [141.278502] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.flipline (expected 2222, found 0) <7> [141.278604] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.guardband (expected 62, found 0) <7> [141.278709] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [141.278811] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:80:pipe A] releasing DPLL 0 <7> [141.278939] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [141.279045] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [141.279170] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0 <7> [141.279269] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0 <7> [141.279367] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [141.279461] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 10, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [141.279552] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 311, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [141.279642] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 344, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [141.279731] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0 <7> [141.279836] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 0 <7> [141.279941] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 0 <7> [141.280057] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 0 <7> [141.280170] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 0 <7> [141.280273] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0 <7> [141.280380] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 0 <7> [141.280484] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0 <7> [141.280599] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [141.280703] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz <7> [141.280815] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [141.280930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [modeset] <7> [141.281050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [141.281161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [141.281270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [141.281380] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [141.281483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [141.281596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7> [141.292379] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B] Disable audio codec on [CRTC:80:pipe A] <7> [141.325822] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [141.326833] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [141.344936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [141.345610] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:80:pipe A] <7> [141.346160] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [141.346618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [141.347056] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A] <7> [141.347434] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [141.347902] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=448 <7> [141.348263] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI B/PHY B] <7> [141.348567] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:237:DP-MST A] <7> [141.348840] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DP-MST B] <7> [141.349125] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:239:DP-MST C] <7> [141.349368] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DP-MST D] <7> [141.349598] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DDI TC1/PHY TC1] <7> [141.349822] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:256:DP-MST A] <7> [141.350055] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:257:DP-MST B] <7> [141.350263] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:258:DP-MST C] <7> [141.350457] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:259:DP-MST D] <7> [141.350656] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:263:DDI TC2/PHY TC2] <7> [141.350853] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST A] <7> [141.351043] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST B] <7> [141.351075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [141.351221] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST C] <7> [141.351307] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [141.351384] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DP-MST D] <7> [141.351538] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DDI TC3/PHY TC3] <7> [141.351701] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST A] <7> [141.351858] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST B] <7> [141.352015] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST C] <7> [141.352161] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST D] <7> [141.352302] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DDI TC4/PHY TC4] <7> [141.352452] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST A] <7> [141.352603] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST B] <7> [141.352756] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST C] <7> [141.352911] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST D] <7> [141.353086] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:DP-1] <7> [141.353265] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [141.353449] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [141.353636] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [141.353816] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [141.353994] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [141.354179] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [141.354340] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [141.354540] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [141.354808] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [141.355036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A <7> [141.355212] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7> [141.355520] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [141.355676] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [141.355786] [drm:drm_mode_setcrtc] [CRTC:233:pipe D] <7> [141.364052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [141.373271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [141.373530] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [141.373756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [141.374336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.375032] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.376141] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.377024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [141.377534] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [141.377761] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [141.377973] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [141.378200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [141.378542] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [141.379153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [141.379408] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [141.379566] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [141.379670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [141.379859] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [141.459040] [IGT] kms_pm_rpm: starting subtest basic-pci-d3-state <7> [142.026160] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [142.038693] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.039054] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [142.039480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [142.039912] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [142.040574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [142.041605] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [142.041906] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [142.042609] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [142.042920] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [142.045446] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.045591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.049189] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.049794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.049920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.050059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [142.050423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.050913] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.051081] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [142.051241] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.051368] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [142.051586] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [142.051607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [142.051818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [142.056842] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.056869] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.058457] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [142.062901] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.062912] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.064391] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [142.065834] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.067506] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [142.069049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [142.069196] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [142.069336] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [142.069476] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [142.087949] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [142.087958] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [142.087961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [142.087964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [142.087987] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [142.088097] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [142.089614] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.089705] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [142.091216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [142.091370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [142.091477] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.091576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.091990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.092290] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [142.092301] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [142.092438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.146107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [142.163501] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.163507] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [142.163598] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [142.180562] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.180566] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [142.180674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.180927] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [142.180938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.181741] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.182356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.182806] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.182927] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [142.183050] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.183187] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [142.183375] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [142.183599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [142.183738] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.183884] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [142.183990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [142.184141] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.208920] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.209035] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [142.209201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [142.209385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [142.209723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [142.209940] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [142.210129] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [142.210389] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [142.210618] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [142.212870] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.213048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.215783] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.216376] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.216555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.216781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [142.217164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.217387] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.217586] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [142.217780] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.217966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [142.218263] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [142.218379] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [142.218705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [142.218874] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.219054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.219560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.219752] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [142.219762] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [142.219916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.220472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.220760] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [142.220745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.220899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [142.221232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.221412] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.221577] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [142.221727] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.221874] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [142.222049] [drm:drm_mode_setcrtc] [CRTC:233:pipe D] <7> [142.222268] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [142.222453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [142.222590] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.222712] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.223178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.223335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.223748] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [142.223754] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [142.223863] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.224735] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.224862] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.224982] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [142.225113] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.225236] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [142.225433] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [142.225689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [142.225835] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.225979] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [142.226089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [142.226220] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.251413] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.251690] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [142.252162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [142.252569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [142.253181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [142.253936] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [142.254299] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [142.254973] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [142.255363] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [142.258071] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.258244] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.261468] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.262375] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.262451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.262917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.263086] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [142.263099] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [142.263202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.263517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [142.263621] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.264075] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.264203] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [142.264323] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.264440] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [142.264546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [142.269716] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.269741] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.271300] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [142.275921] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.275940] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.277389] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [142.278804] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.280462] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [142.282049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [142.282194] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [142.282324] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [142.282448] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [142.300947] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [142.300955] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [142.300959] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [142.300962] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [142.300974] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [142.301072] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [142.302575] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.302667] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [142.304035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [142.304146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [142.304255] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.304357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.304779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.304890] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [142.304895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [142.304988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.358140] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [142.377678] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.377683] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [142.377775] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [142.394816] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.394820] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [142.394912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.395082] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.395445] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [142.395452] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [142.395844] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.396469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.396923] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.397062] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [142.397191] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.397313] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [142.397504] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [142.397739] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [142.397896] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.398063] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [142.398177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [142.398315] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.422954] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.423093] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [142.423276] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [142.423475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [142.423848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [142.424080] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [142.424240] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [142.424473] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [142.424676] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [142.426413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.426521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.429070] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.429687] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.429752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.430111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.430239] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [142.430244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [142.430349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.430675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.430789] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [142.430793] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [142.430893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.431227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.431342] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [142.431347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [142.431445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.431769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.431884] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [142.431894] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [142.431991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.432320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [142.432431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.432837] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.432969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [142.433103] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.433228] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [142.433337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [142.438389] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.438409] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.439799] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [142.444037] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.444048] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.445514] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [142.446995] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.448575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [142.450040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [142.450157] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [142.450269] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [142.450374] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [142.468650] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [142.468657] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [142.468661] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [142.468664] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [142.468677] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [142.468772] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [142.470227] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.470321] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [142.471732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [142.471841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [142.471952] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.472071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.472501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.472615] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [142.472629] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [142.472726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.525926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [142.545593] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.545598] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [142.545685] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [142.562732] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.562735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [142.562821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.562942] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.563309] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [142.563316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [142.563708] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.564318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.564452] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.564573] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [142.564694] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.564808] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [142.564994] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [142.565361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [142.565511] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.565664] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [142.565768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [142.565900] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.590542] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.590649] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [142.590830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [142.591047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [142.591420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [142.591638] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [142.591797] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [142.592049] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [142.592261] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [142.594001] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.594129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.597211] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.597811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.597875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.598223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.598348] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [142.598353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [142.598459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.598782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.598898] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [142.598903] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [142.599010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.599342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.599459] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [142.599464] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [142.599556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.599887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.600012] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.600440] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [142.600450] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [142.600558] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.601406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.601542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.601667] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [142.601791] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.601914] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [142.602121] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [142.602358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [142.602509] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.602665] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [142.602776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [142.602913] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.627567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.627742] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [142.628079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [142.628402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [142.628897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [142.629275] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [142.629524] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [142.629833] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [142.630155] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [142.632582] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.632738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.635850] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.636457] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.636528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.636877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [142.636991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.637389] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.637518] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [142.637637] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.637754] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [142.637861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [142.643340] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.643369] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.644899] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [142.649814] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.649837] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.651412] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [142.652847] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.654566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [142.656281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [142.656448] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [142.656611] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [142.656773] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [142.675572] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [142.675579] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [142.675583] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [142.675586] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [142.675598] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [142.675684] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [142.677035] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.677121] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [142.678613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [142.678724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [142.678837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.678942] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.679379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.679499] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [142.679505] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [142.679600] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.730162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [142.749753] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.749760] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [142.749848] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [142.766872] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.766875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [142.766962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.767116] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [142.767127] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [142.767249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.767594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.767707] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [142.767711] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [142.767806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.768133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.768240] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [142.768244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [142.768337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.768656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.768765] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [142.768769] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [142.768862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.769184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.769295] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [142.769307] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [142.769403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.769711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [142.769815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.770253] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.770392] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [142.770507] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.770622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [142.770726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [142.775730] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.775744] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.777036] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [142.781276] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.781286] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.782704] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [142.784038] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.785524] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [142.787022] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [142.787116] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [142.787201] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [142.787281] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [142.805651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [142.805659] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [142.805663] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [142.805666] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [142.805680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [142.805776] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [142.807268] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.807359] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [142.808731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [142.808842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [142.808954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.809071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.809491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.809593] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [142.809598] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [142.809688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.862901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [142.882125] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.882132] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [142.882229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [142.899228] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.899231] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [142.899325] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.899455] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.899838] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [142.899848] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [142.900223] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.900820] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.900963] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.901104] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [142.901233] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.901359] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [142.901558] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [142.901774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [142.901924] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.902088] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [142.902198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [142.902343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.926968] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.927105] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [142.927290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [142.927487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [142.927860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [142.928087] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [142.928245] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [142.928478] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [142.928682] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [142.930423] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.930531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.933596] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.934202] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.934272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.934629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.934750] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [142.934755] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [142.934849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.935171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.935290] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [142.935313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [142.935414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.935742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.935852] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [142.935857] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [142.935952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.936280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.936392] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [142.936402] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [142.936497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.936803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [142.936907] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.937321] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.937447] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [142.937565] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [142.937684] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [142.937788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [142.942906] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.942926] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.944383] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [142.948847] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.948858] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [142.950314] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [142.951774] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.953342] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [142.954761] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [142.954876] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [142.954985] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [142.955114] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [142.973651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [142.973658] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [142.973662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [142.973665] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [142.973678] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [142.973768] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [142.975225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.975313] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [142.976732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [142.976842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [142.976953] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.977067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.977485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.977595] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [142.977600] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [142.977688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.028266] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [143.047772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.047779] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.047872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [143.064978] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.064981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [143.065088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.065233] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.065605] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [143.065614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [143.065998] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.066635] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.067083] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.067217] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [143.067340] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.067458] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [143.067659] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [143.067898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [143.068063] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.068224] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [143.068328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [143.068466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.093151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.093274] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [143.093455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [143.093654] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [143.094064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [143.094282] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [143.094440] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [143.094676] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [143.094880] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [143.096613] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.096718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.099780] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.100391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.100465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.100826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.100950] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [143.100955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [143.101062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.101388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.101508] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [143.101512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [143.101613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.101935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.102060] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [143.102064] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [143.102166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.102492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.102607] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [143.102617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [143.102716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.103057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [143.103167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.103541] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.103674] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [143.103800] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.103924] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [143.104041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [143.109037] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.109050] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.110523] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [143.114857] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.114871] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.116345] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [143.117773] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.119342] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [143.120757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [143.120870] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [143.120978] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [143.121099] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [143.139651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [143.139659] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [143.139662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [143.139666] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [143.139680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [143.139770] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [143.141224] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.141309] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [143.142730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [143.142838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [143.142949] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.143065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.143482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.143585] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [143.143589] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [143.143678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.194301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [143.213843] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.213850] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.213936] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [143.231052] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.231056] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [143.231148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.231275] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.231631] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [143.231639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [143.232039] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.232637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.232776] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.232901] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [143.233028] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.233148] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [143.233345] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [143.233577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [143.233725] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.233876] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [143.233985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [143.234141] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.258735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.258875] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [143.259081] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [143.259277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [143.259645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [143.259853] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [143.260023] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [143.260279] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [143.260485] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [143.262207] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.262318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.264870] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.265473] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.265546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.265901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.266044] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [143.266051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [143.266153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.266476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.266591] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [143.266595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [143.266686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.266998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.267117] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [143.267121] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [143.267221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.267545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.267660] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [143.267670] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [143.267771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.268093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [143.268208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.268599] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.268730] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [143.268856] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.268981] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [143.269106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [143.274373] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.274394] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.275797] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [143.280037] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.280047] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.281498] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [143.282968] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.284535] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [143.286039] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [143.286150] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [143.286260] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [143.286370] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [143.304949] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [143.304957] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [143.304960] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [143.304963] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [143.304976] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [143.305080] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [143.306582] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.306672] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [143.308034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [143.308139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [143.308241] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.308340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.308751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.308851] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [143.308856] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [143.308945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.359551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [143.378747] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.378754] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.378846] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [143.395865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.395868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [143.395960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.396114] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.396503] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [143.396512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [143.396883] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.397489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.397629] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.397754] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [143.397873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.397989] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [143.398222] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [143.398508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [143.398663] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.398822] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [143.398932] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [143.399087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.423687] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.423791] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [143.423971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [143.424202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [143.424582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [143.424794] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [143.424953] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [143.425208] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [143.425415] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [143.427138] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.427245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.430317] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.430933] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.430998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.431348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.431474] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [143.431480] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [143.431582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.431907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.432032] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [143.432037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [143.432138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.432464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.432578] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [143.432583] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [143.432673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.432988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.433116] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.433534] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [143.433545] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [143.433658] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.434504] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.434640] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.434764] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [143.434886] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.435010] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [143.435210] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [143.435452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [143.435608] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.435767] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [143.435880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [143.436022] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.460634] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.460809] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [143.461152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [143.461471] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [143.461963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [143.462315] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [143.462562] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [143.462923] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [143.463238] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [143.465661] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.465810] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.468398] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.469026] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.469097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.469437] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [143.469552] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.469951] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.470088] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [143.470219] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.470346] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [143.470457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [143.475900] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.475917] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.477494] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [143.482295] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.482316] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.483854] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [143.485071] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.486763] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [143.488387] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [143.488552] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [143.488715] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [143.488881] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [143.507950] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [143.507958] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [143.507961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [143.507964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [143.507980] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [143.508079] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [143.509573] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.509659] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [143.511035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [143.511142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [143.511246] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.511344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.511757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.511860] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [143.511865] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [143.511951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.562483] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [143.582059] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.582066] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.582165] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [143.599265] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.599269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [143.599362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.599486] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [143.599497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [143.599618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.599961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.600083] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [143.600088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [143.600187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.600510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.600625] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [143.600630] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [143.600730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.601061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.601175] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [143.601180] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [143.601278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.601599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.601715] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [143.601728] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [143.601828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.602152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [143.602271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.602656] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.602788] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [143.602915] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.603043] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [143.603166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [143.608037] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.608051] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.609454] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [143.613711] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.613719] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.615037] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [143.616447] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.617927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [143.619360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [143.619449] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [143.619532] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [143.619613] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [143.637949] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [143.637957] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [143.637960] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [143.637964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [143.637977] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [143.638079] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [143.639572] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.639662] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [143.641035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [143.641140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [143.641243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.641339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.641754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.641855] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [143.641860] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [143.641944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.692496] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [143.711572] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.711579] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.711672] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [143.728752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.728755] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [143.728848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.728979] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.729410] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [143.729419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [143.729758] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.730369] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.730826] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.730958] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [143.731097] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.731225] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [143.731419] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [143.731657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [143.731812] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.731969] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [143.732093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [143.732239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.756895] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.757048] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [143.757221] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [143.757406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [143.757769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [143.757975] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [143.758151] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [143.758395] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [143.758591] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [143.760273] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.760377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.763006] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.763575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.763641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.763988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.764120] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [143.764141] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [143.764248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.764573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.764687] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [143.764691] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [143.764789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.765117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.765231] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [143.765236] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [143.765330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.765651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.765767] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [143.765777] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [143.765876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.766198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [143.766314] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.766704] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.766834] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [143.766961] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.767100] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [143.767212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [143.772382] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.772404] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.773799] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [143.778036] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.778045] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.779502] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [143.780977] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.782579] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [143.784043] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [143.784162] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [143.784272] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [143.784386] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [143.802947] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [143.802956] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [143.802959] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [143.802962] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [143.802978] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [143.803078] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [143.804572] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.804660] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [143.806034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [143.806139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [143.806243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.806339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.806752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.806855] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [143.806860] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [143.806947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.857691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [143.876916] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.876923] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.877047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [143.893999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.894018] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [143.894119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.894257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.894625] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [143.894634] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [143.895026] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.895625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.895775] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.895907] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [143.896064] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.896187] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [143.896389] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [143.896630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [143.896785] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.896941] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [143.897061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [143.897209] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.921879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.922035] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [143.922211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [143.922407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [143.922780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [143.922992] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [143.923171] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [143.923405] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [143.923608] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [143.925333] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.925443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.928511] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.929112] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.929188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.929550] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.929677] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [143.929686] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [143.929792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.930126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.930242] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [143.930246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [143.930344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.930665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.930781] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [143.930785] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [143.930886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.931217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.931331] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [143.931343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [143.931445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.931759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [143.931869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.932288] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.932417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [143.932539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [143.932655] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [143.932763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [143.937898] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.937919] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.939384] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [143.943788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.943801] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [143.945275] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [143.946756] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.948318] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [143.949737] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [143.949845] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [143.949949] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [143.950063] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [143.968652] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [143.968660] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [143.968664] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [143.968667] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [143.968680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [143.968772] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [143.970226] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.970312] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [143.971732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [143.971842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [143.971954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.972069] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.972487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.972588] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [143.972594] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [143.972682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.023226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [144.042717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [144.042724] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [144.042818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [144.059963] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [144.059966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [144.060069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.060215] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.060615] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [144.060625] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [144.060979] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [144.061605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.062060] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.062188] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [144.062311] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.062436] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [144.062635] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.062868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.063033] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.063191] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.063301] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.063445] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.088087] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.088224] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.088406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.088607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.088985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.089235] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [144.089389] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.089598] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.089803] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [144.091533] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.091639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.094146] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [144.094764] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.094832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.095229] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.095358] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [144.095367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [144.095472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.095796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.095912] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [144.095916] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [144.096027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.096348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.096467] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [144.096471] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [144.096570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.096890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.097025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.097437] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [144.097446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [144.097549] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [144.098404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.098548] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.098681] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [144.098808] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.098932] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [144.099139] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.099362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.099514] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.099671] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.099782] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.099939] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.124610] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.124785] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.125134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.125437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.125929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.126321] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [144.126574] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.126900] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.127213] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [144.129615] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.129761] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.132305] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [144.132904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.132968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.133370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [144.133484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.133884] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.134023] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [144.134155] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.134282] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [144.134392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [144.139866] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.139898] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.141552] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [144.146291] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.146315] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.147869] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [144.149406] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [144.151062] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [144.152739] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [144.152926] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [144.153136] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [144.153303] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [144.172649] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [144.172658] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [144.172661] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [144.172664] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [144.172680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [144.172772] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [144.174226] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [144.174312] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [144.175733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [144.175842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [144.175950] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.176070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.176494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.176597] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [144.176602] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [144.176689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.227326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [144.246864] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [144.246869] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [144.246962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [144.263983] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [144.263986] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [144.264091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.264218] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [144.264227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [144.264356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.264687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.264807] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [144.264811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [144.264912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.265250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.265376] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.265840] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [144.265845] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [144.266253] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [144.266852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.266986] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.267127] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [144.267256] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.267380] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [144.267577] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.267790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.267941] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.268106] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.268220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.268359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.292964] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.293097] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.293274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.293466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.293831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.294057] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [144.294216] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.294434] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.294636] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [144.296358] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.296463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.299045] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [144.299655] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.299720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.300082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.300213] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [144.300218] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [144.300321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.300644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.300755] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [144.300764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [144.300865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.301182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [144.301294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.301697] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.301819] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [144.301938] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.302071] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [144.302183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [144.307036] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.307049] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.308541] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [144.313057] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.313073] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.314554] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [144.316059] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [144.317681] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [144.319262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [144.319386] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [144.319504] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [144.319627] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [144.338655] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [144.338663] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [144.338666] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [144.338669] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [144.338680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [144.338773] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [144.340225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [144.340312] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [144.341730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [144.341839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [144.341951] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.342066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.342501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.342612] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [144.342617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [144.342710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.393332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [144.412501] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [144.412508] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [144.412601] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [144.429547] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [144.429551] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [144.429644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.429773] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.430150] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [144.430202] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [144.430740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.431087] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.431219] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [144.431341] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.431457] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [144.431647] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.431831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [144.431956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.432113] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.432270] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.432378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.432517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.457110] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.457251] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.457434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.457632] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.458041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.458259] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [144.458416] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.458644] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.458844] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [144.460574] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.460682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.463183] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [144.463784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.463851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.464274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.464410] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [144.464417] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [144.464520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.464843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.464960] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [144.464964] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [144.465074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.465396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.465514] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [144.465518] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [144.465617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.465935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.466072] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.466481] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [144.466522] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [144.467129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.467481] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.467611] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [144.467739] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.467862] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [144.468072] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.468293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.468445] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.468602] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.468711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.468848] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.468941] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [144.493622] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.493830] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.494182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.494493] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.494975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.495312] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [144.495556] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.495874] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.496196] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [144.498580] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.498730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.501843] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [144.502448] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.502518] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.502864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [144.502969] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.503382] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.503510] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [144.503629] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.503745] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [144.503845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [144.509309] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.509340] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.510912] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [144.515751] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.515775] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.517370] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [144.518860] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [144.520562] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [144.522277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [144.522454] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [144.522632] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [144.522793] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [144.541950] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [144.541960] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [144.541963] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [144.541967] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [144.541980] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [144.542083] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [144.543580] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [144.543673] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [144.545034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [144.545139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [144.545243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.545341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.545752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.545858] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [144.545865] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [144.545955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.596507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [144.616035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [144.616039] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [144.616132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [144.633174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [144.633177] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [144.633268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.633385] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [144.633391] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [144.633511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.633834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.633944] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [144.633949] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [144.634051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.634376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.634488] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [144.634493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [144.634594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.634914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.635044] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.635509] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [144.635514] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [144.635913] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [144.636519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.636661] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.636785] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [144.636905] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.637026] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [144.637227] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.637469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.637622] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.637776] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.637886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.638034] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.662587] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.662704] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.662881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.663100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.663481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.663691] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [144.663843] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.664054] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.664263] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [144.665992] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.666114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.669202] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [144.669801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.669866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.670223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.670348] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [144.670361] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [144.670465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.670778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [144.670889] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.671304] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.671436] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [144.671558] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.671678] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [144.671790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [144.676976] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.677000] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.678566] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [144.683036] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.683045] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.684531] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [144.686056] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [144.687652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [144.689284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [144.689420] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [144.689555] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [144.689678] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [144.707947] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [144.707954] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [144.707957] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [144.707961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [144.707971] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [144.708074] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [144.709572] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [144.709661] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [144.711034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [144.711140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [144.711244] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.711343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.711756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.711857] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [144.711862] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [144.711946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.762502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [144.781618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [144.781622] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [144.781715] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [144.798725] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [144.798728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [144.798818] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.798934] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [144.798940] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [144.799060] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.799441] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [144.800339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.800477] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.800605] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [144.800731] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.800854] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [144.801065] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.801313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.801466] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.801624] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.801734] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.801873] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.826504] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.826642] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.826826] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.827049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.827425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.827638] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [144.827800] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.828054] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.828269] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [144.830008] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.830122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.833194] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [144.833789] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.833855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.834247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.834370] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [144.834376] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [144.834477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.834800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.834915] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [144.834920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [144.835028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.835345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.835457] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [144.835460] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [144.835560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.835881] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.835993] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [144.836011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [144.836115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.836426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [144.836539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.836943] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.837082] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [144.837212] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.837337] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [144.837450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [144.842695] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.842714] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.844195] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [144.848362] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.848371] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [144.849732] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [144.851038] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [144.852525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [144.854036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [144.854138] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [144.854238] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [144.854339] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [144.872652] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [144.872660] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [144.872663] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [144.872666] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [144.872676] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [144.872765] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [144.874225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [144.874312] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [144.875732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [144.875845] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [144.875955] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.876069] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.876490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.876598] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [144.876603] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [144.876689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.929965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [144.949573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [144.949580] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [144.949673] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [144.966732] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [144.966736] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [144.966828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.966959] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.967346] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [144.967356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [144.967733] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [144.968347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.968800] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.968926] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [144.969059] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.969184] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [144.969387] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.969635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.969789] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [144.969946] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.970070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.970215] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.994838] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.994981] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.995193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.995388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.995756] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.995971] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [144.996153] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.996408] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.996612] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [144.998336] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.998443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.001509] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [145.002111] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.002185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.002541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.002666] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [145.002673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [145.002771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.003116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.003233] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [145.003238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [145.003339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.003660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.003774] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [145.003778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [145.003879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.004207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.004322] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [145.004333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [145.004432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.004745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [145.004858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.005273] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.005404] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [145.005532] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.005656] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [145.005765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [145.010900] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.010920] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.012366] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [145.016379] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.016393] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.017774] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [145.019238] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [145.020758] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [145.022304] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [145.022414] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [145.022520] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [145.022624] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [145.040950] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [145.040958] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [145.040961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [145.040964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [145.040977] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [145.041082] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [145.042573] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [145.042661] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [145.044034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [145.044145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [145.044252] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.044348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.044761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.044865] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [145.044869] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [145.044956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.095661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [145.114775] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [145.114782] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [145.114875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [145.131934] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [145.131937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [145.132038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.132181] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.132551] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [145.132561] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [145.132946] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [145.133571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.134020] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.134157] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [145.134288] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.134414] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [145.134615] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.134850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.135015] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.135175] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.135287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.135431] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.160075] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.160203] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.160378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.160575] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.160942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.161174] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [145.161336] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.161572] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.161776] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [145.163504] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.163610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.166676] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [145.167283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.167359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.167717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.167843] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [145.167851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [145.167955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.168294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.168409] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [145.168413] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [145.168511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.168831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.168946] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [145.168950] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [145.169057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.169380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.169495] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [145.169506] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [145.169605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.169919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [145.170043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.170434] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.170558] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [145.170686] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.170811] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [145.170920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [145.176036] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.176049] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.177528] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [145.181867] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.181882] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.183377] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [145.184779] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [145.186346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [145.187760] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [145.187884] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [145.188001] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [145.188127] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [145.206652] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [145.206661] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [145.206664] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [145.206667] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [145.206680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [145.206767] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [145.208225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [145.208314] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [145.209732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [145.209842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [145.209954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.210071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.210491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.210601] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [145.210606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [145.210694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.262187] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [145.279838] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [145.279844] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [145.279964] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [145.297101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [145.297106] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [145.297221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.297352] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.297720] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [145.297728] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [145.298125] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [145.298745] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.299214] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.299354] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [145.299484] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.299607] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [145.299810] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.300063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.300221] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.300380] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.300495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.300639] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.325299] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.325406] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.325574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.325762] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.326146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.326357] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [145.326509] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.326737] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.326934] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [145.328621] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.328725] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.331791] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [145.332397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.332469] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.332826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.332951] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [145.332959] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [145.333072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.333394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.333503] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [145.333508] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [145.333604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.333927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.334052] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [145.334057] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [145.334156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.334477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.334591] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [145.334606] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [145.334697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.335038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [145.335150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.335528] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.335652] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [145.335778] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.335905] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [145.336024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [145.341036] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.341050] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.342533] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [145.346881] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.346892] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.348357] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [145.349783] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [145.351373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [145.352955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [145.353087] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [145.353197] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [145.353308] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [145.371650] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [145.371658] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [145.371661] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [145.371664] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [145.371677] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [145.371773] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [145.373239] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [145.373328] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [145.374740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [145.374871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [145.374988] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.375120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.375545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.375703] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [145.375708] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [145.375802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.429058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [145.448613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [145.448617] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [145.448704] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [145.465750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [145.465753] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [145.465847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.465963] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.466332] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [145.466338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [145.466719] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [145.467380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.467789] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.467906] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [145.468030] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.468149] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [145.468376] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.468601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.468743] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.468902] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.469018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.469168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.493764] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.493879] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.494083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.494291] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.494668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.494923] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [145.495099] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.495349] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.495545] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [145.497234] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.497336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.499877] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [145.500485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.500551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.500920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.501110] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [145.501116] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [145.501230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.501560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.501673] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [145.501677] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [145.501768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.502099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.502262] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [145.502266] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [145.502358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.502669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.502769] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [145.502781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [145.502871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.503191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [145.503313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.503699] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.503824] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [145.503946] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.504077] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [145.504198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [145.509358] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.509377] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.510818] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [145.515041] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.515053] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.516505] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [145.517965] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [145.519532] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [145.521038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [145.521143] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [145.521253] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [145.521356] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [145.539651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [145.539658] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [145.539662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [145.539666] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [145.539677] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [145.539767] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [145.541225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [145.541314] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [145.542744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [145.542858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [145.542970] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.543088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.543514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.543640] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [145.543645] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [145.543741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.594228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [145.613790] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [145.613796] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [145.613882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [145.630929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [145.630932] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [145.631028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.631171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.631570] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [145.631578] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [145.631952] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [145.632563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.632694] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.632814] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [145.632927] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.633046] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [145.633260] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.633498] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.633642] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.633786] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.633893] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.634035] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.658581] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.658685] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.658860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.659076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.659471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.659686] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [145.659834] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.660053] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.660254] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [145.661981] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.662100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.665187] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [145.665783] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.665845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.666206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.666338] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [145.666344] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [145.666443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.666762] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.666871] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [145.666875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [145.666966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.667298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.667414] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [145.667419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [145.667514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.667831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.667941] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [145.667951] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [145.668058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.668377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [145.668473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.668890] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.669016] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [145.669136] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.669268] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [145.669375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [145.674646] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.674668] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.676055] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [145.680382] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.680398] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.681809] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [145.683272] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [145.684780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [145.686341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [145.686457] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [145.686572] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [145.686682] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [145.705246] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [145.705254] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [145.705257] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [145.705260] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [145.705272] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [145.705366] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [145.706749] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [145.706840] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [145.708329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [145.708435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [145.708540] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.708636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.709059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.709174] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [145.709179] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [145.709296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.762271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [145.781855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [145.781861] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [145.781948] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [145.799017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [145.799021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [145.799118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.799250] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.799609] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [145.799618] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [145.800013] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [145.800619] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.800765] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.800892] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [145.801020] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.801142] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [145.801351] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.801580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.801728] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.801891] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.801997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.802152] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.826782] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.826920] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.827135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.827347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.827727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.827942] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [145.828110] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.828361] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.828560] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [145.830288] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.830390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.832974] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [145.833575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.833640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.834016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.834138] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [145.834146] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [145.834261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.834581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.834691] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [145.834696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [145.834789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.835114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.835236] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [145.835241] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [145.835328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.835642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.835751] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [145.835762] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [145.835855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.836173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [145.836299] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.836679] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.836797] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [145.836911] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.837042] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [145.837163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [145.842387] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.842407] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.843825] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [145.848311] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.848325] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [145.849811] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [145.851271] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [145.852780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [145.854340] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [145.854453] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [145.854562] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [145.854675] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [145.873248] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [145.873257] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [145.873261] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [145.873264] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [145.873278] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [145.873364] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [145.874752] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [145.874843] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [145.876331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [145.876439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [145.876546] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.876642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.877063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.877178] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [145.877183] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [145.877295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.930372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [145.949633] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [145.949640] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [145.949729] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [145.966712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [145.966715] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [145.966803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.966931] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.967338] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [145.967347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [145.967687] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [145.968307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.968753] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.968873] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [145.968988] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.969122] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [145.969332] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.969557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.969696] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [145.969839] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.969937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.970079] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.994656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.994760] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.994937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.995156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.995547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.995755] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [145.995904] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.996170] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.996378] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [145.998105] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.998208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.001270] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [146.001868] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.001929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.002313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.002439] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [146.002445] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [146.002545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.002863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.002973] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [146.002978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [146.003086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.003422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.003529] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [146.003533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [146.003619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.003940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.004063] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.004486] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [146.004496] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [146.004595] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [146.005469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.005607] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.005725] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [146.005841] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.005952] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [146.006151] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.006400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.006548] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.006699] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.006807] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.006938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [146.031547] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.031723] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [146.032056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [146.032417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.032896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.033235] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [146.033497] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.033804] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.034114] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [146.036549] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.036698] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.039414] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [146.039934] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.039994] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.040318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [146.040435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.040827] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.040951] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [146.041079] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.041219] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [146.041316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [146.046533] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.046565] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.047951] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [146.052814] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.052833] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.054407] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [146.055876] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [146.057601] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [146.059328] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [146.059512] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [146.059682] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [146.059843] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [146.078949] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [146.078957] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [146.078961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [146.078963] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [146.078976] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [146.079082] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [146.080612] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [146.080707] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [146.082197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [146.082305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [146.082411] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.082507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.082921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.083035] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [146.083040] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [146.083138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.136098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [146.155288] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [146.155295] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [146.155385] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [146.172378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [146.172381] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [146.172472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.172597] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.172955] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [146.172964] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [146.173354] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [146.173959] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.174427] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.174546] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [146.174661] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.174772] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [146.174957] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.175198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.175348] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.175500] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.175606] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.175739] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [146.200413] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.200516] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [146.200693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [146.200886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.201291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.201505] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [146.201654] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.201876] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.202088] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [146.203837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.203941] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.207026] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [146.207635] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.207695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.208059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.208193] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [146.208199] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [146.208299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.208617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.208729] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [146.208733] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [146.208830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.209162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.209278] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [146.209283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [146.209379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.209694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.209801] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [146.209812] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [146.209902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.210226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [146.210351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.210737] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.210857] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [146.210971] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.211105] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [146.211210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [146.216387] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.216407] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.217829] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [146.222351] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.222367] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.223813] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [146.225272] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [146.226778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [146.228341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [146.228459] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [146.228572] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [146.228680] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [146.247249] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [146.247257] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [146.247260] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [146.247263] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [146.247276] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [146.247369] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [146.248751] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [146.248841] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [146.250311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [146.250417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [146.250520] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.250617] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.251035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.251145] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [146.251151] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [146.251266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.304252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [146.323823] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [146.323829] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [146.323916] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [146.340942] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [146.340945] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [146.341050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.341188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.341579] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [146.341586] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [146.341961] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [146.342590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.343043] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.343175] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [146.343301] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.343422] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [146.343618] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.343852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.343997] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.344165] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.344280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.344417] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [146.368965] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.369104] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [146.369287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [146.369479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.369848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.370081] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [146.370256] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.370479] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.370675] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [146.372397] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.372498] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.375064] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [146.375658] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.375718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.376083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.376213] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [146.376221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [146.376331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.376647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.376754] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [146.376759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [146.376850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.377176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.377308] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [146.377312] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [146.377409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.377728] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.377838] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [146.377847] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [146.377944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.378269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [146.378387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.378779] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.378896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [146.379019] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.379137] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [146.379265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [146.384386] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.384405] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.385828] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [146.390341] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.390355] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.391808] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [146.393278] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [146.394778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [146.396333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [146.396446] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [146.396557] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [146.396670] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [146.415247] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [146.415254] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [146.415257] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [146.415260] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [146.415272] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [146.415366] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [146.416753] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [146.416842] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [146.418330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [146.418438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [146.418542] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.418640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.419063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.419177] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [146.419182] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [146.419304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.472246] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [146.491882] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [146.491889] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [146.491977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [146.508959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [146.508963] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [146.509063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.509204] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.509612] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [146.509621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [146.509984] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [146.510616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.511068] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.511207] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [146.511329] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.511450] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [146.511646] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.511879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.512035] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.512195] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.512306] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.512444] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [146.537053] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.537160] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [146.537342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [146.537539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.537915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.538147] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [146.538325] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.538551] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.538747] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [146.540479] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.540581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.543639] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [146.544244] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.544310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.544675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.544794] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [146.544799] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [146.544890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.545209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.545334] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [146.545339] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [146.545434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.545751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.545860] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [146.545864] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [146.545955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.546293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.546411] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [146.546421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [146.546519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.546828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [146.546934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.547356] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.547486] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [146.547601] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.547712] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [146.547808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [146.552907] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.552929] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.554367] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [146.558374] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.558388] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.559808] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [146.561265] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [146.562774] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [146.564344] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [146.564460] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [146.564570] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [146.564672] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [146.583248] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [146.583256] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [146.583259] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [146.583262] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [146.583276] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [146.583368] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [146.584754] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [146.584844] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [146.586338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [146.586445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [146.586549] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.586647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.587068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.587184] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [146.587190] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [146.587305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.640317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [146.659807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [146.659815] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [146.659902] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [146.677043] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [146.677047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [146.677153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.677279] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.677641] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [146.677650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [146.678060] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [146.678666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.679109] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.679246] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [146.679362] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.679476] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [146.679663] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.679885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.680031] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.680186] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.680299] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.680435] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [146.705038] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.705169] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [146.705345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [146.705542] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.705914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.706150] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [146.706321] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.706551] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.706751] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [146.708463] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.708568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.711635] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [146.712241] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.712318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.712677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.712797] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [146.712805] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [146.712894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.713211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.713334] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [146.713340] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [146.713443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.713759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.713869] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [146.713873] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [146.713966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.714304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.714430] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [146.714440] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [146.714535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.714843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [146.714948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.715370] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.715496] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [146.715610] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.715723] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [146.715821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [146.720904] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.720925] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.722383] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [146.726864] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.726879] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.728380] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [146.729794] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [146.731368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [146.732926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [146.733059] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [146.733175] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [146.733288] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [146.751651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [146.751660] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [146.751665] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [146.751667] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [146.751679] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [146.751773] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [146.753227] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [146.753316] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [146.754745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [146.754856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [146.754968] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.755085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.755516] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.755622] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [146.755627] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [146.755718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.807986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [146.827566] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [146.827573] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [146.827659] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [146.844812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [146.844815] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [146.844907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.845064] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.845447] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [146.845457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [146.845823] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [146.846454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.846890] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.847016] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [146.847138] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.847272] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [146.847468] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.847699] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.847848] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.848001] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.848120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.848276] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [146.872912] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.873034] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [146.873212] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [146.873406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.873773] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.873985] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [146.874164] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.874416] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.874614] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [146.876337] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.876438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.879503] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [146.880104] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.880171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.880539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.880658] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [146.880663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [146.880755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.881081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.881206] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [146.881210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [146.881306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.881625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.881737] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [146.881741] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [146.881836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.882166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.882285] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [146.882295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [146.882392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.882699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [146.882803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.883225] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.883367] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [146.883482] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [146.883594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [146.883691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [146.888886] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.888899] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.890383] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [146.894788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.894803] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [146.896279] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [146.897765] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [146.899346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [146.900765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [146.900877] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [146.900985] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [146.901107] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [146.919651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [146.919659] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [146.919662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [146.919665] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [146.919677] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [146.919770] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [146.921229] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [146.921317] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [146.922744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [146.922857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [146.922969] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.923087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.923524] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.923640] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [146.923645] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [146.923739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.974266] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [146.993773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [146.993780] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [146.993867] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [147.010978] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [147.010982] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [147.011088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.011247] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [147.011613] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [147.011623] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [147.012013] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [147.012637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.013081] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.013224] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [147.013348] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.013468] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [147.013662] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [147.013897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [147.014055] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.014221] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [147.014329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [147.014467] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [147.039058] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [147.039161] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [147.039338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [147.039531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [147.039906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [147.040148] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [147.040323] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [147.040547] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [147.040746] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [147.042467] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.042569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.045631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [147.046238] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [147.046304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.046672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.046790] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [147.046796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [147.046889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.047205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.047341] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [147.047346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [147.047444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.047760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.047873] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [147.047877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [147.047972] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.048306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.048429] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [147.048439] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [147.048534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.048843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [147.048947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.049371] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.049494] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [147.049609] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.049720] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [147.049817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [147.054909] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.054929] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.056384] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [147.060853] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.060866] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.062338] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [147.063793] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [147.065368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [147.066920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [147.067048] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [147.067167] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [147.067276] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [147.085651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [147.085659] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [147.085662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [147.085665] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [147.085679] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [147.085773] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [147.087225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [147.087318] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [147.088744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [147.088856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [147.088967] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.089085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.089525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.089637] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [147.089642] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [147.089733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.140344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [147.160044] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [147.160051] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [147.160146] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [147.177239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [147.177242] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [147.177332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.177455] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [147.177815] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [147.177824] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [147.178218] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [147.178817] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.179304] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.179432] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [147.179560] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.179675] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [147.179862] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [147.180097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [147.180247] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.180409] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [147.180534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [147.180669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [147.204557] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [147.204645] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [147.204796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [147.204968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [147.205335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [147.205531] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [147.205705] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [147.205926] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [147.206136] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [147.207750] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.207852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.210394] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [147.210992] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [147.211074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.211424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.211585] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [147.211590] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [147.211681] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.212000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.212120] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [147.212125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [147.212236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.212556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.212667] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [147.212671] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [147.212765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.213112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.213258] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [147.213269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [147.213360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.213691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [147.213808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.214229] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.214381] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [147.214498] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.214622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [147.214721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [147.219837] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.219851] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.221304] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [147.225372] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.225386] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.226765] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [147.228239] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [147.229743] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [147.231275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [147.231376] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [147.231476] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [147.231569] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [147.249951] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [147.249958] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [147.249962] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [147.249965] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [147.249978] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [147.250082] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [147.251588] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [147.251679] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [147.253036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [147.253144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [147.253249] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.253344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.253756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.253863] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [147.253868] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [147.253956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.304501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [147.324129] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [147.324139] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [147.324228] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [147.341334] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [147.341338] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [147.341433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.341559] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [147.341919] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [147.341929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [147.342316] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [147.342927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.343388] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.343509] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [147.343633] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.343746] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [147.343934] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [147.344202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [147.344347] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.344502] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [147.344601] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [147.344749] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [147.369387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [147.369491] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [147.369666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [147.369859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [147.370248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [147.370462] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [147.370653] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [147.370896] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [147.371120] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [147.372842] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.372950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.376052] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [147.376660] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [147.376720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.377087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.377222] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [147.377228] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [147.377326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.377653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.377817] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [147.377822] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [147.377923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.378272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.378378] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [147.378382] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [147.378480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.378798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.378915] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [147.378929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [147.379077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.379395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [147.379501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.379912] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.380049] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [147.380176] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.380295] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [147.380433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [147.385688] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.385709] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.387054] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [147.391376] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.391391] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.392793] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [147.394273] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [147.395756] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [147.397339] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [147.397453] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [147.397563] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [147.397673] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [147.416248] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [147.416256] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [147.416259] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [147.416263] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [147.416276] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [147.416368] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [147.417736] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [147.417836] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [147.419360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [147.419470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [147.419576] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.419674] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.420095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.420212] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [147.420217] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [147.420314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.473247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [147.492812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [147.492816] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [147.492904] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [147.509889] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [147.509893] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [147.509980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.510127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [147.510491] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [147.510498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [147.510874] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [147.511501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.511944] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.512112] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [147.512243] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.512365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [147.512558] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [147.512785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [147.512936] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.513144] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [147.513251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [147.513386] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [147.538053] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [147.538218] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [147.538393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [147.538584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [147.538950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [147.539184] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [147.539337] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [147.539568] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [147.539770] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [147.541501] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.541601] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.544284] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [147.544809] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [147.544877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.545235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.545355] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [147.545366] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [147.545491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.545844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.545962] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [147.545967] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [147.546079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.546405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.546542] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [147.546549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [147.546660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.546990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.547120] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [147.547146] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [147.547252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.547562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [147.547704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.548102] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.548229] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [147.548363] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.548484] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [147.548589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [147.553688] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.553709] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.555053] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [147.559374] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.559388] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.560778] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [147.562252] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [147.563764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [147.565349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [147.565471] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [147.565587] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [147.565695] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [147.584248] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [147.584257] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [147.584262] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [147.584265] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [147.584277] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [147.584370] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [147.585738] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [147.585840] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [147.587328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [147.587436] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [147.587541] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.587639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.588064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.588176] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [147.588182] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [147.588284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.641102] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [147.660733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [147.660741] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [147.660830] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [147.677852] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [147.677855] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [147.677945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.678085] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [147.678460] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [147.678472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [147.678835] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [147.679464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.679907] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.680096] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [147.680231] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.680361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [147.680565] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [147.680790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [147.680940] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.681141] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [147.681253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [147.681396] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [147.706064] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [147.706225] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [147.706398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [147.706587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [147.706953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [147.707185] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [147.707334] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [147.707555] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [147.707756] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [147.709512] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.709620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.712718] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [147.713322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [147.713396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.713759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.713912] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [147.713922] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [147.714026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.714369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.714482] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [147.714486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [147.714579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.714905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.715070] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [147.715075] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [147.715171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.715496] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.715613] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [147.715625] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [147.715711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.716033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [147.716141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.716531] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.716650] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [147.716773] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.716887] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [147.716988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [147.722039] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.722054] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.723521] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [147.727998] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.728015] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.729463] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [147.730939] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [147.732538] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [147.734040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [147.734155] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [147.734266] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [147.734370] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [147.752951] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [147.752960] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [147.752963] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [147.752966] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [147.752980] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [147.753086] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [147.754588] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [147.754684] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [147.756035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [147.756143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [147.756246] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.756344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.756757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.756859] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [147.756864] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [147.756952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.807502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [147.827116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [147.827123] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [147.827217] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [147.844339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [147.844343] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [147.844437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.844563] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [147.844939] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [147.844948] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [147.845317] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [147.845927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.846389] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.846508] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [147.846630] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.846743] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [147.846929] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [147.847177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [147.847363] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.847510] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [147.847621] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [147.847753] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [147.872400] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [147.872503] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [147.872679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [147.872872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [147.873269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [147.873482] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [147.873680] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [147.873919] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [147.874147] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [147.875880] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.875986] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.879082] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [147.879710] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [147.879770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.880118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.880234] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [147.880241] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [147.880336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.880679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.880811] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [147.880816] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [147.880909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.881260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.881374] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [147.881379] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [147.881476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.881804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.881958] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [147.881969] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [147.882078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.882404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [147.882520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.882920] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.883102] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [147.883232] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [147.883357] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [147.883459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [147.888692] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.888713] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.890222] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [147.894586] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.894599] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [147.896047] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [147.897551] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [147.899048] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [147.900581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [147.900695] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [147.900814] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [147.900917] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [147.919247] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [147.919255] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [147.919259] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [147.919262] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [147.919273] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [147.919368] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [147.920737] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [147.920843] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [147.922341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [147.922454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [147.922559] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.922657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.923081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.923192] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [147.923198] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [147.923300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.976185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [147.995816] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [147.995823] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [147.995912] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [148.012914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [148.012918] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [148.013013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.013143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [148.013528] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [148.013540] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [148.013898] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [148.014527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [148.014969] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.015138] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [148.015265] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.015386] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [148.015592] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [148.015824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [148.015975] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.016193] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [148.016304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [148.016447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [148.041079] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [148.041228] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [148.041406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [148.041596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [148.041958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [148.042195] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [148.042345] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [148.042579] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [148.042781] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [148.044561] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [148.044664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [148.047743] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [148.048350] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [148.048421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.048788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.048939] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [148.048946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [148.049050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.049391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.049501] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [148.049505] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [148.049598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.049921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.050089] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [148.050093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [148.050194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.050517] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.050636] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [148.050647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [148.050739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.051061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [148.051210] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [148.051566] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.051687] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [148.051811] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.051930] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [148.052048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [148.057061] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.057081] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.058551] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [148.063056] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.063071] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.064556] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [148.066050] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [148.067628] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [148.069200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [148.069313] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [148.069425] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [148.069530] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [148.087949] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [148.087958] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [148.087962] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [148.087965] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [148.087977] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [148.088083] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [148.089617] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [148.089715] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [148.091206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [148.091315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [148.091420] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [148.091519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [148.091932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.092048] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [148.092053] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [148.092153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.145224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [148.165251] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [148.165259] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [148.165348] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [148.182531] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [148.182534] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [148.182622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.182741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [148.183119] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [148.183128] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [148.183484] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [148.184115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [148.184552] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.184677] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [148.184797] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.184916] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [148.185139] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [148.185369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [148.185518] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.185668] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [148.185772] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [148.185907] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [148.210536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [148.210641] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [148.210817] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [148.211033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [148.211407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [148.211618] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [148.211778] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [148.212041] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [148.212243] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [148.213971] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [148.214093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [148.217167] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [148.217778] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [148.217843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.218204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.218329] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [148.218336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [148.218442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.218764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.218879] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [148.218884] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [148.218979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.219312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.219428] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [148.219433] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [148.219533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.219854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.219966] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [148.219976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [148.220104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.220420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [148.220530] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [148.220935] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.221079] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [148.221206] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.221333] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [148.221446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [148.226693] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.226714] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.228227] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [148.232688] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.232703] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.234057] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [148.235556] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [148.237042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [148.238596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [148.238711] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [148.238827] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [148.238942] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [148.257652] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [148.257659] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [148.257662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [148.257665] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [148.257678] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [148.257770] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [148.259226] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [148.259311] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [148.260733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [148.260844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [148.260956] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [148.261071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [148.261491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.261602] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [148.261606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [148.261696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.312236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [148.331785] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [148.331790] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [148.331882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [148.349005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [148.349008] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [148.349107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.349239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [148.349613] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [148.349619] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [148.349998] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [148.350623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [148.351069] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.351200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [148.351320] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.351443] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [148.351636] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [148.351868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [148.352019] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.352171] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [148.352280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [148.352412] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [148.377139] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [148.377304] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [148.377481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [148.377676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [148.378088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [148.378307] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [148.378465] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [148.378675] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [148.378882] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [148.380600] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [148.380707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [148.383773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [148.384378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [148.384456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.384814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.384934] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [148.384945] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [148.385055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.385380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.385493] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [148.385497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [148.385599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.385923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.386040] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [148.386044] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [148.386144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.386463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.386570] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [148.386582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [148.386680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.386988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [148.387109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [148.387504] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.387633] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [148.387762] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.387887] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [148.387995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [148.393041] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.393056] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.395023] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [148.399380] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.399394] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.400785] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [148.402268] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [148.403747] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [148.405300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [148.405412] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [148.405518] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [148.405621] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [148.423949] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [148.423959] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [148.423962] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [148.423965] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [148.423978] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [148.424083] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [148.425587] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [148.425676] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [148.427034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [148.427140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [148.427243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [148.427341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [148.427752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.427853] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [148.427858] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [148.427944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.480765] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [148.500366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [148.500373] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [148.500467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [148.517567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [148.517570] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [148.517662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.517793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [148.518188] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [148.518197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [148.518553] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [148.519169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [148.519310] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.519428] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [148.519544] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.519660] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [148.519845] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [148.520140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [148.520294] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.520439] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [148.520539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [148.520670] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [148.545358] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [148.545466] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [148.545649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [148.545848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [148.546240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [148.546457] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [148.546614] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [148.546847] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [148.547064] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [148.548801] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [148.548910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [148.551986] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [148.552606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [148.552672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.553043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.553168] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [148.553174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [148.553277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.553596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.553712] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [148.553716] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [148.553818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.554148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.554265] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [148.554270] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [148.554369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.554706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.554821] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [148.554831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [148.554931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.555254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [148.555361] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [148.555774] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.555896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [148.556022] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.556146] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [148.556258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [148.561386] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.561406] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.562796] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [148.567054] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.567069] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.568547] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [148.570032] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [148.571611] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [148.573040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [148.573154] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [148.573265] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [148.573374] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [148.591953] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [148.591961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [148.591964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [148.591967] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [148.591980] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [148.592080] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [148.593566] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [148.593652] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [148.595034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [148.595140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [148.595244] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [148.595339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [148.595754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.595857] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [148.595861] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [148.595947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.646664] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [148.665844] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [148.665851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [148.665944] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [148.682962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [148.682966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [148.683068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.683212] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [148.683626] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [148.683636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [148.683994] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [148.684620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [148.685068] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.685199] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [148.685324] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.685441] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [148.685643] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [148.685887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [148.686048] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.686206] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [148.686311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [148.686449] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [148.711148] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [148.711283] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [148.711462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [148.711655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [148.712045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [148.712266] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [148.712429] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [148.712665] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [148.712872] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [148.714610] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [148.714720] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [148.717788] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [148.718393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [148.718465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.718825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.718947] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [148.718953] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [148.719063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.719386] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.719494] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [148.719498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [148.719596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.719918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.720041] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [148.720045] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [148.720147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.720465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.720574] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [148.720584] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [148.720677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.720986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [148.721119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [148.721502] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.721622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [148.721747] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.721872] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [148.721983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [148.727059] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.727079] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.728555] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [148.732865] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.732878] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.734347] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [148.736377] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [148.737943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [148.739503] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [148.739616] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [148.739728] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [148.739837] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [148.758248] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [148.758256] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [148.758259] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [148.758262] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [148.758275] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [148.758365] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [148.759739] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [148.759826] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [148.761311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [148.761422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [148.761528] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [148.761624] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [148.762046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.762163] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [148.762168] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [148.762268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.815343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [148.834845] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [148.834852] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [148.834945] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [148.852110] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [148.852114] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [148.852213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.852347] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [148.852731] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [148.852740] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [148.853115] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [148.853714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [148.853868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.853999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [148.854145] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.854275] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [148.854475] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [148.854717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [148.854871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.855037] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [148.855151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [148.855293] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [148.880043] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [148.880211] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [148.880389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [148.880584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [148.880958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [148.881196] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [148.881351] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [148.881589] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [148.881790] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [148.883516] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [148.883620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [148.886690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [148.887310] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [148.887389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.887753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.887879] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [148.887890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [148.887988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.888320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.888439] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [148.888444] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [148.888545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.888869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.888987] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [148.888991] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [148.889101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.889425] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.889539] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [148.889552] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [148.889652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.889968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [148.890095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [148.890483] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.890604] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [148.890725] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [148.890843] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [148.890945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [148.896037] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.896051] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.897530] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [148.901862] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.901875] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [148.903375] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [148.904777] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [148.906343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [148.907735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [148.907845] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [148.907953] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [148.908080] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [148.926651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [148.926660] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [148.926663] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [148.926666] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [148.926680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [148.926766] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [148.928225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [148.928314] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [148.929732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [148.929841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [148.929952] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [148.930068] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [148.930496] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.930608] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [148.930613] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [148.930703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.982549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [149.002121] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [149.002128] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [149.002220] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [149.019266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [149.019269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [149.019363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [149.019494] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [149.019905] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [149.019915] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [149.020276] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [149.020881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [149.021058] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [149.021191] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [149.021317] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [149.021440] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [149.021640] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [149.021887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [149.022041] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [149.022201] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [149.022314] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [149.022459] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [149.047112] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [149.047258] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [149.047441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [149.047636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [149.048041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [149.048260] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [149.048414] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [149.048649] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [149.048859] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [149.050583] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [149.050688] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [149.053757] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [149.054363] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [149.054438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [149.054792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [149.054915] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [149.054923] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [149.055026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [149.055352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [149.055469] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [149.055474] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [149.055572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [149.055896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [149.056017] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [149.056022] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [149.056124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [149.056452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [149.056567] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [149.056578] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [149.056671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [149.056979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [149.057101] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [149.057494] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [149.057624] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [149.057751] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [149.057876] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [149.057986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [149.063037] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [149.063051] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [149.064522] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [149.068874] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [149.068887] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [149.070383] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [149.071783] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [149.073368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [149.074923] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [149.075055] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [149.075174] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [149.075283] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [149.093651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [149.093659] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [149.093663] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [149.093665] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [149.093679] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [149.093765] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [149.095225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [149.095313] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [149.096733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [149.096844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [149.096956] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [149.097073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [149.097496] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [149.097599] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [149.097604] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [149.097691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [149.150305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [149.169767] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [149.169772] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [149.169865] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [149.186973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [149.186977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [149.187079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [149.187207] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [149.187215] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [149.187343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [149.187673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [149.187789] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [149.187793] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [149.187894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [149.188224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [149.188342] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [149.188346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [149.188441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [149.188760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [149.188875] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [149.188878] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [149.188975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [149.189304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [149.189416] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [149.189423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [149.189946] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [149.190508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [149.190850] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [149.190973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [149.191100] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [149.191230] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [149.191429] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [149.191646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [149.191800] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [149.191958] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [149.192078] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [149.192217] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [149.236239] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [149.236371] [drm:drm_mode_setcrtc] [CONNECTOR:236:DP-1] <7> [149.236601] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:DP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [149.237367] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 533250KHz <7> [149.238304] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7> [149.238871] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1999688 available 2160000 <7> [149.239442] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:DP-1] SDP split enable: no <7> [149.239868] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [149.240444] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI B/PHY B] [CRTC:80:pipe A] <7> [149.240902] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [149.241387] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [149.241512] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [149.241620] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [149.241726] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7766016/8388608 link 517734/524288) <7> [149.241832] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080) <7> [149.241939] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [149.242066] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840) <7> [149.242176] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000) <7> [149.242280] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840) <7> [149.242382] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000) <7> [149.242492] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888) <7> [149.242602] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920) <7> [149.242707] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160) <7> [149.242810] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2222) <7> [149.242919] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2160) <7> [149.243033] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2222) <7> [149.243143] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2214) <7> [149.243249] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2219) <7> [149.243353] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840) <7> [149.243460] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000) <7> [149.243567] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840) <7> [149.243670] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000) <7> [149.243774] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888) <7> [149.243879] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920) <7> [149.243985] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160) <7> [149.244104] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2222) <7> [149.244214] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2160) <7> [149.244321] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2222) <7> [149.244426] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2214) <7> [149.244529] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2219) <7> [149.244636] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [149.244743] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [149.244848] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [149.244952] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in has_audio (expected no, found yes) <7> [149.245070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer <7> [149.245178] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [149.245180] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [149.245182] found: 10 00 07 00 69 14 00 01 00 00 00 00 00 00 00 00 <7> [149.245183] found: 1e 6d 07 77 4c 47 20 48 44 52 20 34 4b 09 07 07 <7> [149.245185] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [149.245290] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 533250) <7> [149.245394] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 533250) <7> [149.245498] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [149.245605] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.vmin (expected 0, found 2221) <7> [149.245710] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.vmax (expected 0, found 3332) <7> [149.245813] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.flipline (expected 0, found 2222) <7> [149.245915] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.guardband (expected 0, found 62) <7> [149.246028] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [149.246184] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [149.246297] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [149.246419] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027 <7> [149.246512] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69 <7> [149.246605] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [149.246700] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 10, 14, 20, 20, 0, 0, 0, 6, 0 <7> [149.246795] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 311, 435, 621, 621, 0, 0, 45, 187, 201 <7> [149.246886] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 344, 480, 685, 685, 0, 0, 46, 207, 207 <7> [149.246980] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2133000 num active planes 1 <7> [149.247105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 2240 <7> [149.247211] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 2240 <7> [149.247320] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 2240 <7> [149.247425] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 2240 <7> [149.247528] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2240 <7> [149.247631] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 2240 <7> [149.247736] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2240 <7> [149.247851] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (266625 kHz) > [CRTC:80:pipe A] min cdclk (0 kHz) <7> [149.247957] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (41661 kHz) > old min cdclk (0 kHz) <7> [149.248078] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [149.248185] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz <7> [149.248291] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [149.248396] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:80:pipe A] allocated DPLL 0 <7> [149.248499] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:80:pipe A] reserving DPLL 0 <7> [149.248605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7> [149.248712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [149.248819] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [149.248923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [149.249038] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [149.249144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [149.249250] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [149.249354] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7766016, data_n: 8388608, link_m: 517734, link_n: 524288, tu: 64 <7> [149.249458] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [149.249562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [149.249669] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [149.249774] ELD: 10 00 07 00 69 14 00 01 00 00 00 00 00 00 00 00 <7> [149.249775] ELD: 1e 6d 07 77 4c 47 20 48 44 52 20 34 4b 09 07 07 <7> [149.249776] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 2221, vmax: 3332, pipeline full: 0, guardband: 62 flipline: 2222, vmin vblank: 2160, vmax vblank: 3270 <7> [149.249881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9 <7> [149.249987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9 <7> [149.250102] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=533250, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2222 vs=2214-2219 vt=2222, flags=0x9 <7> [149.250205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x40 0x9 <7> [149.250307] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=533250, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2222 vs=2214-2219 vt=2222, flags=0x9 <7> [149.250414] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3840x2160+0+0, pixel rate 533250 <7> [149.250520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 61, ips linetime: 0 <7> [149.250623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [149.250725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [149.250830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [149.250934] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [149.251041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [149.251146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [149.251252] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [149.251357] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [149.251460] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [149.251562] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [149.251661] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [149.251763] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [149.251868] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [149.251970] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [149.252082] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [149.252189] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [149.252293] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:293] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [149.252397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [149.252499] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0 <7> [149.252601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [149.252705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [149.252809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [149.252911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [149.253021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7> [149.265413] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [149.265495] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [149.265617] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [149.265748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [149.266034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [149.266226] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [149.266342] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [149.266523] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [149.266693] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [149.268302] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [149.268408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [149.271477] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [149.272099] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [149.273783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [149.273892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [149.274173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [149.274317] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [149.274447] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [149.274575] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [149.274701] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [149.274818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7> [149.274954] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [149.275199] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=768 <7> [149.275313] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI B/PHY B] <7> [149.275418] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:237:DP-MST A] <7> [149.275521] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DP-MST B] <7> [149.275621] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:239:DP-MST C] <7> [149.275722] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DP-MST D] <7> [149.275823] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DDI TC1/PHY TC1] <7> [149.275922] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:256:DP-MST A] <7> [149.276039] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:257:DP-MST B] <7> [149.276139] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:258:DP-MST C] <7> [149.276240] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:259:DP-MST D] <7> [149.276339] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:263:DDI TC2/PHY TC2] <7> [149.276437] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST A] <7> [149.276538] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST B] <7> [149.276637] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST C] <7> [149.276738] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DP-MST D] <7> [149.276838] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DDI TC3/PHY TC3] <7> [149.276939] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST A] <7> [149.277061] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST B] <7> [149.277160] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST C] <7> [149.277262] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST D] <7> [149.277361] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DDI TC4/PHY TC4] <7> [149.277462] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST A] <7> [149.277563] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST B] <7> [149.277665] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST C] <7> [149.277765] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST D] <7> [149.277861] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [149.277974] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [149.278096] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [149.278204] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [149.278313] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [149.278424] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [149.278535] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [149.278655] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [149.278831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [149.278947] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:80:pipe A] <7> [149.279063] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [149.279234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [149.286030] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [149.286043] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [149.287451] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [149.291720] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [149.291733] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [149.291750] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Using LINK_BW_SET value 14 <7> [149.294611] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [149.294798] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Using DP training pattern TPS1 <7> [149.298505] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0 <7> [149.298619] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0 <7> [149.302357] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 0/0/0/0 <7> [149.302453] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 2/2/2/2, pre-emphasis levels: 0/0/0/0 <7> [149.306205] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Clock recovery OK <7> [149.306302] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Using DP training pattern TPS3 <7> [149.310655] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing request: 3/3/3/3, pre-emphasis request: 0/0/0/0 <7> [149.310775] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 3(max)/3(max)/3(max)/3(max), pre-emphasis levels: 0/0/0/0 <7> [149.315252] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Channel EQ done. DP Training successful <7> [149.315357] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [149.316362] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [149.316525] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B] Enable audio codec on [CRTC:80:pipe A], 32 bytes ELD <7> [149.333140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [149.333262] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [149.333412] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic Maud, Naud <7> [149.333577] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 34283520 bytes of contiguous stolen space for FBC, limit: 1 <7> [149.333693] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A] <7> [149.346865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [149.350079] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [149.350476] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:DP-1] <7> [149.350688] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7> [149.351096] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI B/PHY B] Fec status: 0 <7> [149.351302] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <6> [149.352216] [IGT] kms_pm_rpm: finished subtest basic-pci-d3-state, SUCCESS <7> [149.352647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [149.352963] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:293] from all active usage due to RMFB ioctl <7> [149.357662] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [149.357714] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [149.359293] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [149.364220] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [149.364233] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [149.366107] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [149.367720] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [149.369827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [149.371853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [149.372272] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [149.372614] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [149.372700] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [149.393065] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [149.393081] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [149.393091] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [149.393097] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [149.393116] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [149.393303] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [149.394934] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [149.395114] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [149.396766] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [149.396776] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [149.447245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [149.456991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [149.457011] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [149.457232] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [149.464442] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [149.464446] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [149.464534] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8 <7> [149.464885] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:293] is removed <7> [149.464999] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0 <7> [149.465111] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [149.465206] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 10, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [149.465302] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 311, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [149.465396] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 344, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [149.465489] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0 <7> [149.465598] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 0 <7> [149.465706] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 0 <7> [149.465813] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 0 <7> [149.465918] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 0 <7> [149.466030] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0 <7> [149.466134] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 0 <7> [149.466236] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0 <7> [149.483460] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A] <7> [149.501681] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [149.502319] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [149.502349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [149.502810] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [149.502826] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [149.503290] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1 <7> [149.503305] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [149.503708] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1 <7> [149.504681] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027 <7> [149.504986] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [149.505336] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 10, 14, 20, 20, 0, 0, 0, 6, 0 <7> [149.505604] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 311, 435, 621, 621, 0, 0, 45, 187, 201 <7> [149.505845] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 344, 480, 685, 685, 0, 0, 46, 207, 207 <7> [149.506129] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2133000 num active planes 1 <7> [149.506407] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 2240 <7> [149.506662] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 2240 <7> [149.506909] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 2240 <7> [149.507170] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 2240 <7> [149.507399] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2240 <7> [149.507607] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 2240 <7> [149.507804] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2240 <7> [149.508207] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 34283520 bytes of contiguous stolen space for FBC, limit: 1 <7> [149.508389] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A] <6> [149.517490] [IGT] kms_pm_rpm: exiting, ret=0 <6> [149.533917] Console: switching to colour frame buffer device 480x135

<7> [139.951339] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]

<7> [139.951346] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [140.003882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [140.013437] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [140.013445] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.013549] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [140.020582] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [140.020585] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [140.020670] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected

<7> [140.021130] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]

<7> [140.021134] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [140.021285] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected

<7> [140.021607] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3]

<7> [140.021610] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [140.021733] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected

<7> [140.022080] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4]

<7> [140.022083] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [140.022233] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected

<7> [140.022552] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5]

<7> [140.022554] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [140.022705] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected

<7> [140.023191] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]

<7> [140.023197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [140.028033] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [140.028047] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [140.029358] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [140.033372] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [140.033385] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [140.034765] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [140.036198] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.037752] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [140.039267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [140.039368] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [140.039466] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [140.039567] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [140.059237] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [140.059244] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [140.059247] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [140.059250] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [140.059262] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [140.059353] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [140.060728] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.060817] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [140.062436] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] probed modes :

<7> [140.062439] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9

<7> [140.062443] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9

<7> [140.062445] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9

<7> [140.062448] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [140.062450] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [140.062452] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [140.062455] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [140.062457] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [140.062459] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [140.062462] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81768 1152 1216 1336 1520 864 867 871 897 0x0 0x6

<7> [140.062464] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [140.062466] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [140.062469] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [140.062471] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [140.062473] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [140.062476] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa

<7> [140.062478] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa

<7> [140.062480] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [140.062482] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [140.062485] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [140.062506] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]

<7> [140.062509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [140.115108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [140.124147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [140.124157] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.124335] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [140.131548] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [140.131551] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [140.131634] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected

<7> [140.131664] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]

<7> [140.131668] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [140.131815] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected

<7> [140.131828] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3]

<7> [140.131831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [140.131950] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected

<7> [140.131961] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4]

<7> [140.131963] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [140.132093] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected

<7> [140.132104] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5]

<7> [140.132107] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [140.132238] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected

<7> [140.132265] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]

<7> [140.132270] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [140.137376] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [140.137394] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [140.138788] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [140.143038] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [140.143051] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [140.144495] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [140.145934] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.147474] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [140.148989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [140.149109] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [140.149212] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [140.149313] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [140.168927] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [140.168934] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [140.168937] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [140.168941] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [140.168951] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [140.169053] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [140.170525] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.170614] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [140.172175] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] probed modes :

<7> [140.172178] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9

<7> [140.172182] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9

<7> [140.172185] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9

<7> [140.172187] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [140.172189] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [140.172192] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [140.172194] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [140.172196] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [140.172199] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [140.172201] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81768 1152 1216 1336 1520 864 867 871 897 0x0 0x6

<7> [140.172203] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [140.172206] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [140.172208] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [140.172210] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [140.172213] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [140.172215] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa

<7> [140.172217] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa

<7> [140.172219] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [140.172222] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [140.172224] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [140.172290] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]

<7> [140.172294] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [140.222792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [140.232722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [140.232748] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.233278] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [140.240988] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [140.240992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [140.241098] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected

<7> [140.241195] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]

<7> [140.241200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [140.241360] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected

<7> [140.241409] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3]

<7> [140.241412] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [140.241545] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected

<7> [140.241592] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4]

<7> [140.241595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [140.241724] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected

<7> [140.241765] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5]

<7> [140.241768] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [140.241895] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected

<7> [141.271754] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [141.272877] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [141.273806] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [141.274331] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [141.274445] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7766016/8388608 link 517734/524288, found tu 0, data 0/0 link 0/0)

<7> [141.274559] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000)

<7> [141.274672] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [141.274775] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0)

<7> [141.274876] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0)

<7> [141.274979] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0)

<7> [141.275097] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0)

<7> [141.275207] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0)

<7> [141.275310] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0)

<7> [141.275418] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0)

<7> [141.275529] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2222, found 0)

<7> [141.275632] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2160, found 0)

<7> [141.275733] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2222, found 0)

<7> [141.275832] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2214, found 0)

<7> [141.275936] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2219, found 0)

<7> [141.276059] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0)

<7> [141.276169] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0)

<7> [141.276278] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0)

<7> [141.276391] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0)

<7> [141.276492] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0)

<7> [141.276592] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0)

<7> [141.276696] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0)

<7> [141.276799] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2222, found 0)

<7> [141.276901] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2160, found 0)

<7> [141.277002] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2222, found 0)

<7> [141.277119] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2214, found 0)

<7> [141.277223] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2219, found 0)

<7> [141.277328] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [141.277438] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [141.277543] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [141.277644] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in has_audio (expected yes, found no)

<7> [141.277744] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer

<7> [141.277847] expected: 10 00 07 00 69 14 00 01 00 00 00 00 00 00 00 00

<7> [141.277848] expected: 1e 6d 07 77 4c 47 20 48 44 52 20 34 4b 09 07 07

<7> [141.277849] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.277850] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.277852] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [141.277956] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 533250, found 0)

<7> [141.278071] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 533250, found 0)

<7> [141.278179] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [141.278287] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.vmin (expected 2221, found 0)

<7> [141.278398] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.vmax (expected 3332, found 0)

<7> [141.278502] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.flipline (expected 2222, found 0)

<7> [141.278604] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.guardband (expected 62, found 0)

<7> [141.278709] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [141.278811] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:80:pipe A] releasing DPLL 0

<7> [141.278939] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [141.279045] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [141.279170] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0

<7> [141.279269] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0

<7> [141.279367] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [141.279461] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 10, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [141.279552] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 311, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [141.279642] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 344, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [141.279731] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0

<7> [141.279836] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 0

<7> [141.279941] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 0

<7> [141.280057] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 0

<7> [141.280170] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 0

<7> [141.280273] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0

<7> [141.280380] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 0

<7> [141.280484] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0

<7> [141.280599] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [141.280703] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz

<7> [141.280815] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [141.280930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [modeset]

<7> [141.281050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [141.281161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [141.281270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [141.281380] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [141.281483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [141.281596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no

<7> [141.292379] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B] Disable audio codec on [CRTC:80:pipe A]

<7> [141.325822] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [141.326833] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [141.344936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [141.345610] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:80:pipe A]

<7> [141.346160] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [141.346618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [141.347056] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]

<7> [141.347434] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [141.347902] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=448

<7> [141.348263] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI B/PHY B]

<7> [141.348567] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:237:DP-MST A]

<7> [141.348840] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DP-MST B]

<7> [141.349125] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:239:DP-MST C]

<7> [141.349368] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DP-MST D]

<7> [141.349598] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DDI TC1/PHY TC1]

<7> [141.349822] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:256:DP-MST A]

<7> [141.350055] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:257:DP-MST B]

<7> [141.350263] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:258:DP-MST C]

<7> [141.350457] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:259:DP-MST D]

<7> [141.350656] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:263:DDI TC2/PHY TC2]

<7> [141.350853] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST A]

<7> [141.351043] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST B]

<7> [141.351075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [141.351221] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST C]

<7> [141.351307] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [141.351384] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DP-MST D]

<7> [141.351538] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DDI TC3/PHY TC3]

<7> [141.351701] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST A]

<7> [141.351858] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST B]

<7> [141.352015] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST C]

<7> [141.352161] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST D]

<7> [141.352302] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DDI TC4/PHY TC4]

<7> [141.352452] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST A]

<7> [141.352603] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST B]

<7> [141.352756] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST C]

<7> [141.352911] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST D]

<7> [141.353086] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:DP-1]

<7> [141.353265] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [141.353449] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [141.353636] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [141.353816] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [141.353994] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [141.354179] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [141.354340] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [141.354540] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [141.354808] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [141.355036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A

<7> [141.355212] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A]

<7> [141.364052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [141.373271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [141.373530] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [141.373756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [141.374336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.375032] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.376141] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.377024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [141.377534] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [141.377761] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [141.377973] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [141.378200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [141.378542] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [141.379153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [141.379408] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [141.379566] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [141.379670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [141.379859] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [141.459040] [IGT] kms_pm_rpm: starting subtest basic-pci-d3-state

<7> [142.038693] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.039054] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [142.039480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [142.039912] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [142.040574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [142.041605] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [142.041906] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [142.042609] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [142.042920] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [142.045446] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.045591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.049189] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.049794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.049920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.050059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [142.050423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.050913] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.051081] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [142.051241] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.051368] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [142.051607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [142.051818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [142.056842] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.056869] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.058457] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [142.062901] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.062912] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.064391] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [142.065834] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.067506] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [142.069049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [142.069196] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [142.069336] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [142.069476] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [142.087949] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [142.087958] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [142.087961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [142.087964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [142.087987] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [142.088097] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [142.089614] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.089705] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [142.091216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [142.091370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [142.091477] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.091576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.091990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.092290] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [142.092301] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [142.092438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.146107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [142.163501] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.163507] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [142.163598] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [142.180562] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.180566] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [142.180674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.180927] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [142.180938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.181741] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.182356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.182806] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.182927] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [142.183050] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.183187] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [142.183375] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [142.183599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [142.183738] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.183884] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [142.183990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [142.184141] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.208920] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.209035] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [142.209201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [142.209385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [142.209723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [142.209940] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [142.210129] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [142.210389] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [142.210618] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [142.212870] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.213048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.215783] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.216376] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.216555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.216781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [142.217164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.217387] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.217586] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [142.217780] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.217966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [142.218379] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [142.218705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [142.218874] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.219054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.219560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.219752] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [142.219762] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [142.219916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.220472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.220760] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [142.220745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.220899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [142.221232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.221412] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.221577] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [142.221727] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.221874] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [142.222268] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [142.222453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [142.222590] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.222712] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.223178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.223335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.223748] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [142.223754] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [142.223863] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.224735] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.224862] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.224982] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [142.225113] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.225236] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [142.225433] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [142.225689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [142.225835] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.225979] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [142.226089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [142.226220] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.251413] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.251690] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [142.252162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [142.252569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [142.253181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [142.253936] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [142.254299] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [142.254973] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [142.255363] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [142.258071] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.258244] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.261468] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.262375] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.262451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.262917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.263086] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [142.263099] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [142.263202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.263517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [142.263621] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.264075] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.264203] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [142.264323] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.264440] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [142.264546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [142.269716] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.269741] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.271300] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [142.275921] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.275940] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.277389] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [142.278804] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.280462] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [142.282049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [142.282194] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [142.282324] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [142.282448] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [142.300947] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [142.300955] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [142.300959] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [142.300962] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [142.300974] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [142.301072] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [142.302575] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.302667] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [142.304035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [142.304146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [142.304255] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.304357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.304779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.304890] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [142.304895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [142.304988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.358140] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [142.377678] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.377683] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [142.377775] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [142.394816] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.394820] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [142.394912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.395082] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.395445] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [142.395452] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [142.395844] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.396469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.396923] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.397062] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [142.397191] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.397313] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [142.397504] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [142.397739] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [142.397896] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.398063] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [142.398177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [142.398315] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.422954] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.423093] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [142.423276] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [142.423475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [142.423848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [142.424080] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [142.424240] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [142.424473] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [142.424676] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [142.426413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.426521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.429070] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.429687] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.429752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.430111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.430239] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [142.430244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [142.430349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.430675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.430789] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [142.430793] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [142.430893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.431227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.431342] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [142.431347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [142.431445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.431769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.431884] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [142.431894] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [142.431991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.432320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [142.432431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.432837] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.432969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [142.433103] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.433228] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [142.433337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [142.438389] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.438409] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.439799] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [142.444037] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.444048] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.445514] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [142.446995] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.448575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [142.450040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [142.450157] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [142.450269] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [142.450374] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [142.468650] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [142.468657] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [142.468661] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [142.468664] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [142.468677] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [142.468772] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [142.470227] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.470321] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [142.471732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [142.471841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [142.471952] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.472071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.472501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.472615] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [142.472629] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [142.472726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.525926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [142.545593] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.545598] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [142.545685] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [142.562732] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.562735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [142.562821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.562942] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.563309] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [142.563316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [142.563708] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.564318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.564452] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.564573] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [142.564694] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.564808] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [142.564994] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [142.565361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [142.565511] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.565664] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [142.565768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [142.565900] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.590542] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.590649] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [142.590830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [142.591047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [142.591420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [142.591638] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [142.591797] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [142.592049] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [142.592261] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [142.594001] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.594129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.597211] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.597811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.597875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.598223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.598348] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [142.598353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [142.598459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.598782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.598898] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [142.598903] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [142.599010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.599342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.599459] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [142.599464] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [142.599556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.599887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.600012] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.600440] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [142.600450] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [142.600558] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.601406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.601542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.601667] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [142.601791] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.601914] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [142.602121] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [142.602358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [142.602509] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.602665] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [142.602776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [142.602913] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.627567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.627742] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [142.628079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [142.628402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [142.628897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [142.629275] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [142.629524] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [142.629833] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [142.630155] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [142.632582] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.632738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.635850] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.636457] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.636528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.636877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [142.636991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.637389] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.637518] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [142.637637] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.637754] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [142.637861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [142.643340] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.643369] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.644899] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [142.649814] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.649837] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.651412] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [142.652847] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.654566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [142.656281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [142.656448] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [142.656611] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [142.656773] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [142.675572] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [142.675579] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [142.675583] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [142.675586] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [142.675598] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [142.675684] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [142.677035] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.677121] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [142.678613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [142.678724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [142.678837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.678942] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.679379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.679499] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [142.679505] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [142.679600] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.730162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [142.749753] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.749760] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [142.749848] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [142.766872] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.766875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [142.766962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.767116] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [142.767127] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [142.767249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.767594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.767707] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [142.767711] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [142.767806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.768133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.768240] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [142.768244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [142.768337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.768656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.768765] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [142.768769] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [142.768862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.769184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.769295] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [142.769307] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [142.769403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.769711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [142.769815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.770253] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.770392] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [142.770507] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.770622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [142.770726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [142.775730] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.775744] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.777036] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [142.781276] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.781286] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.782704] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [142.784038] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.785524] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [142.787022] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [142.787116] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [142.787201] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [142.787281] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [142.805651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [142.805659] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [142.805663] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [142.805666] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [142.805680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [142.805776] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [142.807268] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.807359] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [142.808731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [142.808842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [142.808954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.809071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.809491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.809593] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [142.809598] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [142.809688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.862901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [142.882125] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.882132] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [142.882229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [142.899228] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.899231] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [142.899325] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.899455] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.899838] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [142.899848] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [142.900223] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.900820] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.900963] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.901104] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [142.901233] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.901359] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [142.901558] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [142.901774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [142.901924] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.902088] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [142.902198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [142.902343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.926968] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.927105] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [142.927290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [142.927487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [142.927860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [142.928087] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [142.928245] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [142.928478] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [142.928682] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [142.930423] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.930531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.933596] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.934202] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.934272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.934629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.934750] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [142.934755] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [142.934849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.935171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.935290] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [142.935313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [142.935414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.935742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.935852] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [142.935857] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [142.935952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.936280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.936392] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [142.936402] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [142.936497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.936803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [142.936907] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.937321] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.937447] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [142.937565] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [142.937684] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [142.937788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [142.942906] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.942926] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.944383] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [142.948847] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.948858] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [142.950314] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [142.951774] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.953342] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [142.954761] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [142.954876] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [142.954985] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [142.955114] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [142.973651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [142.973658] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [142.973662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [142.973665] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [142.973678] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [142.973768] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [142.975225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.975313] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [142.976732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [142.976842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [142.976953] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.977067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.977485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.977595] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [142.977600] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [142.977688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.028266] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [143.047772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.047779] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.047872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [143.064978] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.064981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [143.065088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.065233] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.065605] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [143.065614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [143.065998] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.066635] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.067083] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.067217] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [143.067340] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.067458] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [143.067659] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [143.067898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [143.068063] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.068224] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [143.068328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [143.068466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.093151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.093274] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [143.093455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [143.093654] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [143.094064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [143.094282] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [143.094440] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [143.094676] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [143.094880] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [143.096613] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.096718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.099780] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.100391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.100465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.100826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.100950] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [143.100955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [143.101062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.101388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.101508] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [143.101512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [143.101613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.101935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.102060] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [143.102064] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [143.102166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.102492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.102607] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [143.102617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [143.102716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.103057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [143.103167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.103541] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.103674] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [143.103800] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.103924] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [143.104041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [143.109037] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.109050] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.110523] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [143.114857] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.114871] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.116345] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [143.117773] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.119342] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [143.120757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [143.120870] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [143.120978] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [143.121099] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [143.139651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [143.139659] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [143.139662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [143.139666] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [143.139680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [143.139770] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [143.141224] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.141309] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [143.142730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [143.142838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [143.142949] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.143065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.143482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.143585] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [143.143589] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [143.143678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.194301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [143.213843] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.213850] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.213936] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [143.231052] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.231056] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [143.231148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.231275] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.231631] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [143.231639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [143.232039] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.232637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.232776] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.232901] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [143.233028] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.233148] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [143.233345] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [143.233577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [143.233725] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.233876] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [143.233985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [143.234141] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.258735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.258875] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [143.259081] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [143.259277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [143.259645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [143.259853] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [143.260023] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [143.260279] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [143.260485] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [143.262207] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.262318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.264870] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.265473] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.265546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.265901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.266044] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [143.266051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [143.266153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.266476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.266591] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [143.266595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [143.266686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.266998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.267117] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [143.267121] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [143.267221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.267545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.267660] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [143.267670] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [143.267771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.268093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [143.268208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.268599] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.268730] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [143.268856] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.268981] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [143.269106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [143.274373] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.274394] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.275797] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [143.280037] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.280047] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.281498] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [143.282968] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.284535] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [143.286039] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [143.286150] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [143.286260] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [143.286370] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [143.304949] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [143.304957] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [143.304960] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [143.304963] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [143.304976] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [143.305080] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [143.306582] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.306672] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [143.308034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [143.308139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [143.308241] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.308340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.308751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.308851] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [143.308856] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [143.308945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.359551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [143.378747] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.378754] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.378846] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [143.395865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.395868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [143.395960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.396114] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.396503] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [143.396512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [143.396883] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.397489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.397629] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.397754] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [143.397873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.397989] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [143.398222] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [143.398508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [143.398663] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.398822] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [143.398932] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [143.399087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.423687] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.423791] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [143.423971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [143.424202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [143.424582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [143.424794] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [143.424953] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [143.425208] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [143.425415] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [143.427138] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.427245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.430317] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.430933] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.430998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.431348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.431474] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [143.431480] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [143.431582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.431907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.432032] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [143.432037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [143.432138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.432464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.432578] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [143.432583] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [143.432673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.432988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.433116] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.433534] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [143.433545] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [143.433658] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.434504] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.434640] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.434764] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [143.434886] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.435010] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [143.435210] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [143.435452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [143.435608] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.435767] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [143.435880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [143.436022] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.460634] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.460809] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [143.461152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [143.461471] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [143.461963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [143.462315] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [143.462562] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [143.462923] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [143.463238] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [143.465661] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.465810] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.468398] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.469026] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.469097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.469437] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [143.469552] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.469951] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.470088] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [143.470219] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.470346] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [143.470457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [143.475900] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.475917] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.477494] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [143.482295] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.482316] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.483854] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [143.485071] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.486763] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [143.488387] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [143.488552] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [143.488715] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [143.488881] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [143.507950] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [143.507958] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [143.507961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [143.507964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [143.507980] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [143.508079] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [143.509573] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.509659] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [143.511035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [143.511142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [143.511246] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.511344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.511757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.511860] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [143.511865] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [143.511951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.562483] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [143.582059] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.582066] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.582165] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [143.599265] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.599269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [143.599362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.599486] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [143.599497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [143.599618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.599961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.600083] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [143.600088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [143.600187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.600510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.600625] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [143.600630] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [143.600730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.601061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.601175] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [143.601180] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [143.601278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.601599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.601715] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [143.601728] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [143.601828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.602152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [143.602271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.602656] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.602788] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [143.602915] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.603043] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [143.603166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [143.608037] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.608051] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.609454] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [143.613711] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.613719] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.615037] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [143.616447] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.617927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [143.619360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [143.619449] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [143.619532] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [143.619613] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [143.637949] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [143.637957] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [143.637960] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [143.637964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [143.637977] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [143.638079] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [143.639572] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.639662] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [143.641035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [143.641140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [143.641243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.641339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.641754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.641855] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [143.641860] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [143.641944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.692496] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [143.711572] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.711579] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.711672] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [143.728752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.728755] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [143.728848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.728979] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.729410] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [143.729419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [143.729758] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.730369] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.730826] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.730958] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [143.731097] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.731225] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [143.731419] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [143.731657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [143.731812] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.731969] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [143.732093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [143.732239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.756895] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.757048] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [143.757221] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [143.757406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [143.757769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [143.757975] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [143.758151] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [143.758395] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [143.758591] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [143.760273] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.760377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.763006] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.763575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.763641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.763988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.764120] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [143.764141] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [143.764248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.764573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.764687] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [143.764691] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [143.764789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.765117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.765231] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [143.765236] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [143.765330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.765651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.765767] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [143.765777] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [143.765876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.766198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [143.766314] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.766704] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.766834] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [143.766961] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.767100] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [143.767212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [143.772382] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.772404] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.773799] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [143.778036] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.778045] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.779502] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [143.780977] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.782579] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [143.784043] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [143.784162] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [143.784272] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [143.784386] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [143.802947] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [143.802956] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [143.802959] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [143.802962] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [143.802978] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [143.803078] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [143.804572] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.804660] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [143.806034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [143.806139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [143.806243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.806339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.806752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.806855] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [143.806860] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [143.806947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.857691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [143.876916] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.876923] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.877047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [143.893999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.894018] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [143.894119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.894257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.894625] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [143.894634] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [143.895026] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.895625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.895775] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.895907] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [143.896064] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.896187] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [143.896389] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [143.896630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [143.896785] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.896941] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [143.897061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [143.897209] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.921879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.922035] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [143.922211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [143.922407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [143.922780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [143.922992] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [143.923171] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [143.923405] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [143.923608] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [143.925333] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.925443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.928511] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.929112] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.929188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.929550] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.929677] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [143.929686] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [143.929792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.930126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.930242] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [143.930246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [143.930344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.930665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.930781] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [143.930785] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [143.930886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.931217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.931331] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [143.931343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [143.931445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.931759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [143.931869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.932288] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.932417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [143.932539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [143.932655] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [143.932763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [143.937898] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.937919] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.939384] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [143.943788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.943801] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [143.945275] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [143.946756] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.948318] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [143.949737] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [143.949845] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [143.949949] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [143.950063] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [143.968652] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [143.968660] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [143.968664] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [143.968667] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [143.968680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [143.968772] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [143.970226] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.970312] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [143.971732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [143.971842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [143.971954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.972069] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.972487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.972588] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [143.972594] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [143.972682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.023226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [144.042717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [144.042724] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [144.042818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [144.059963] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [144.059966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [144.060069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.060215] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.060615] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [144.060625] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [144.060979] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [144.061605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.062060] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.062188] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [144.062311] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.062436] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [144.062635] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.062868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.063033] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.063191] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.063301] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.063445] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.088087] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.088224] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.088406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.088607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.088985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.089235] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [144.089389] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.089598] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.089803] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [144.091533] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.091639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.094146] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [144.094764] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.094832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.095229] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.095358] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [144.095367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [144.095472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.095796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.095912] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [144.095916] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [144.096027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.096348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.096467] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [144.096471] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [144.096570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.096890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.097025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.097437] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [144.097446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [144.097549] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [144.098404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.098548] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.098681] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [144.098808] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.098932] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [144.099139] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.099362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.099514] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.099671] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.099782] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.099939] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.124610] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.124785] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.125134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.125437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.125929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.126321] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [144.126574] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.126900] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.127213] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [144.129615] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.129761] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.132305] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [144.132904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.132968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.133370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [144.133484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.133884] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.134023] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [144.134155] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.134282] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [144.134392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [144.139866] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.139898] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.141552] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [144.146291] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.146315] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.147869] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [144.149406] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [144.151062] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [144.152739] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [144.152926] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [144.153136] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [144.153303] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [144.172649] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [144.172658] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [144.172661] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [144.172664] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [144.172680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [144.172772] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [144.174226] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [144.174312] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [144.175733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [144.175842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [144.175950] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.176070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.176494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.176597] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [144.176602] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [144.176689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.227326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [144.246864] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [144.246869] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [144.246962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [144.263983] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [144.263986] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [144.264091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.264218] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [144.264227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [144.264356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.264687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.264807] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [144.264811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [144.264912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.265250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.265376] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.265840] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [144.265845] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [144.266253] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [144.266852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.266986] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.267127] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [144.267256] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.267380] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [144.267577] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.267790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.267941] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.268106] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.268220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.268359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.292964] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.293097] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.293274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.293466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.293831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.294057] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [144.294216] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.294434] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.294636] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [144.296358] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.296463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.299045] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [144.299655] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.299720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.300082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.300213] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [144.300218] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [144.300321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.300644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.300755] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [144.300764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [144.300865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.301182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [144.301294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.301697] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.301819] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [144.301938] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.302071] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [144.302183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [144.307036] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.307049] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.308541] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [144.313057] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.313073] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.314554] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [144.316059] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [144.317681] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [144.319262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [144.319386] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [144.319504] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [144.319627] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [144.338655] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [144.338663] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [144.338666] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [144.338669] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [144.338680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [144.338773] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [144.340225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [144.340312] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [144.341730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [144.341839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [144.341951] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.342066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.342501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.342612] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [144.342617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [144.342710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.393332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [144.412501] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [144.412508] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [144.412601] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [144.429547] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [144.429551] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [144.429644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.429773] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.430150] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [144.430202] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [144.430740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.431087] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.431219] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [144.431341] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.431457] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [144.431647] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.431831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [144.431956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.432113] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.432270] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.432378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.432517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.457110] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.457251] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.457434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.457632] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.458041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.458259] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [144.458416] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.458644] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.458844] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [144.460574] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.460682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.463183] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [144.463784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.463851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.464274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.464410] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [144.464417] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [144.464520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.464843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.464960] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [144.464964] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [144.465074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.465396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.465514] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [144.465518] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [144.465617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.465935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.466072] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.466481] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [144.466522] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [144.467129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.467481] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.467611] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [144.467739] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.467862] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [144.468072] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.468293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.468445] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.468602] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.468711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.468848] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.468941] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [144.493622] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.493830] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.494182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.494493] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.494975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.495312] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [144.495556] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.495874] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.496196] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [144.498580] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.498730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.501843] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [144.502448] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.502518] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.502864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [144.502969] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.503382] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.503510] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [144.503629] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.503745] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [144.503845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [144.509309] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.509340] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.510912] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [144.515751] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.515775] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.517370] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [144.518860] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [144.520562] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [144.522277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [144.522454] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [144.522632] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [144.522793] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [144.541950] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [144.541960] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [144.541963] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [144.541967] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [144.541980] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [144.542083] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [144.543580] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [144.543673] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [144.545034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [144.545139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [144.545243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.545341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.545752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.545858] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [144.545865] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [144.545955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.596507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [144.616035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [144.616039] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [144.616132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [144.633174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [144.633177] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [144.633268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.633385] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [144.633391] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [144.633511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.633834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.633944] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [144.633949] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [144.634051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.634376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.634488] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [144.634493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [144.634594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.634914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.635044] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.635509] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [144.635514] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [144.635913] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [144.636519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.636661] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.636785] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [144.636905] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.637026] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [144.637227] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.637469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.637622] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.637776] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.637886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.638034] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.662587] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.662704] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.662881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.663100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.663481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.663691] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [144.663843] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.664054] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.664263] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [144.665992] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.666114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.669202] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [144.669801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.669866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.670223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.670348] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [144.670361] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [144.670465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.670778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [144.670889] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.671304] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.671436] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [144.671558] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.671678] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [144.671790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [144.676976] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.677000] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.678566] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [144.683036] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.683045] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.684531] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [144.686056] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [144.687652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [144.689284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [144.689420] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [144.689555] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [144.689678] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [144.707947] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [144.707954] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [144.707957] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [144.707961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [144.707971] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [144.708074] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [144.709572] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [144.709661] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [144.711034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [144.711140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [144.711244] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.711343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.711756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.711857] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [144.711862] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [144.711946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.762502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [144.781618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [144.781622] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [144.781715] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [144.798725] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [144.798728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [144.798818] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.798934] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [144.798940] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [144.799060] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.799441] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [144.800339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.800477] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.800605] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [144.800731] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.800854] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [144.801065] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.801313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.801466] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.801624] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.801734] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.801873] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.826504] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.826642] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.826826] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.827049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.827425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.827638] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [144.827800] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.828054] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.828269] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [144.830008] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.830122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.833194] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [144.833789] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.833855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.834247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.834370] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [144.834376] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [144.834477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.834800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.834915] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [144.834920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [144.835028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.835345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.835457] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [144.835460] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [144.835560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.835881] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.835993] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [144.836011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [144.836115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.836426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [144.836539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.836943] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.837082] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [144.837212] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.837337] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [144.837450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [144.842695] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.842714] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.844195] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [144.848362] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.848371] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [144.849732] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [144.851038] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [144.852525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [144.854036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [144.854138] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [144.854238] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [144.854339] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [144.872652] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [144.872660] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [144.872663] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [144.872666] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [144.872676] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [144.872765] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [144.874225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [144.874312] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [144.875732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [144.875845] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [144.875955] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.876069] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.876490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.876598] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [144.876603] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [144.876689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.929965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [144.949573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [144.949580] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [144.949673] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [144.966732] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [144.966736] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [144.966828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.966959] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.967346] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [144.967356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [144.967733] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [144.968347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.968800] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.968926] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [144.969059] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.969184] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [144.969387] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.969635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.969789] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [144.969946] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.970070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.970215] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.994838] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.994981] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.995193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.995388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.995756] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.995971] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [144.996153] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.996408] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.996612] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [144.998336] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.998443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.001509] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [145.002111] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.002185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.002541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.002666] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [145.002673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [145.002771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.003116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.003233] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [145.003238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [145.003339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.003660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.003774] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [145.003778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [145.003879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.004207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.004322] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [145.004333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [145.004432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.004745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [145.004858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.005273] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.005404] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [145.005532] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.005656] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [145.005765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [145.010900] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.010920] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.012366] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [145.016379] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.016393] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.017774] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [145.019238] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [145.020758] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [145.022304] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [145.022414] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [145.022520] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [145.022624] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [145.040950] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [145.040958] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [145.040961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [145.040964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [145.040977] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [145.041082] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [145.042573] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [145.042661] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [145.044034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [145.044145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [145.044252] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.044348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.044761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.044865] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [145.044869] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [145.044956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.095661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [145.114775] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [145.114782] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [145.114875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [145.131934] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [145.131937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [145.132038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.132181] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.132551] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [145.132561] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [145.132946] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [145.133571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.134020] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.134157] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [145.134288] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.134414] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [145.134615] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.134850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.135015] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.135175] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.135287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.135431] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.160075] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.160203] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.160378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.160575] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.160942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.161174] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [145.161336] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.161572] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.161776] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [145.163504] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.163610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.166676] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [145.167283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.167359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.167717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.167843] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [145.167851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [145.167955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.168294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.168409] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [145.168413] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [145.168511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.168831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.168946] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [145.168950] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [145.169057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.169380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.169495] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [145.169506] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [145.169605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.169919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [145.170043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.170434] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.170558] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [145.170686] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.170811] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [145.170920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [145.176036] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.176049] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.177528] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [145.181867] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.181882] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.183377] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [145.184779] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [145.186346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [145.187760] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [145.187884] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [145.188001] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [145.188127] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [145.206652] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [145.206661] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [145.206664] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [145.206667] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [145.206680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [145.206767] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [145.208225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [145.208314] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [145.209732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [145.209842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [145.209954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.210071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.210491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.210601] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [145.210606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [145.210694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.262187] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [145.279838] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [145.279844] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [145.279964] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [145.297101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [145.297106] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [145.297221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.297352] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.297720] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [145.297728] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [145.298125] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [145.298745] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.299214] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.299354] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [145.299484] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.299607] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [145.299810] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.300063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.300221] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.300380] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.300495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.300639] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.325299] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.325406] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.325574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.325762] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.326146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.326357] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [145.326509] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.326737] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.326934] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [145.328621] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.328725] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.331791] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [145.332397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.332469] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.332826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.332951] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [145.332959] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [145.333072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.333394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.333503] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [145.333508] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [145.333604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.333927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.334052] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [145.334057] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [145.334156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.334477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.334591] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [145.334606] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [145.334697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.335038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [145.335150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.335528] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.335652] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [145.335778] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.335905] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [145.336024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [145.341036] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.341050] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.342533] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [145.346881] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.346892] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.348357] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [145.349783] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [145.351373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [145.352955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [145.353087] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [145.353197] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [145.353308] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [145.371650] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [145.371658] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [145.371661] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [145.371664] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [145.371677] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [145.371773] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [145.373239] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [145.373328] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [145.374740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [145.374871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [145.374988] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.375120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.375545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.375703] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [145.375708] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [145.375802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.429058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [145.448613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [145.448617] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [145.448704] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [145.465750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [145.465753] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [145.465847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.465963] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.466332] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [145.466338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [145.466719] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [145.467380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.467789] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.467906] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [145.468030] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.468149] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [145.468376] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.468601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.468743] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.468902] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.469018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.469168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.493764] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.493879] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.494083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.494291] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.494668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.494923] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [145.495099] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.495349] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.495545] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [145.497234] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.497336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.499877] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [145.500485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.500551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.500920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.501110] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [145.501116] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [145.501230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.501560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.501673] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [145.501677] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [145.501768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.502099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.502262] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [145.502266] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [145.502358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.502669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.502769] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [145.502781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [145.502871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.503191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [145.503313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.503699] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.503824] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [145.503946] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.504077] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [145.504198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [145.509358] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.509377] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.510818] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [145.515041] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.515053] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.516505] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [145.517965] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [145.519532] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [145.521038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [145.521143] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [145.521253] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [145.521356] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [145.539651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [145.539658] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [145.539662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [145.539666] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [145.539677] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [145.539767] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [145.541225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [145.541314] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [145.542744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [145.542858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [145.542970] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.543088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.543514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.543640] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [145.543645] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [145.543741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.594228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [145.613790] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [145.613796] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [145.613882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [145.630929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [145.630932] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [145.631028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.631171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.631570] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [145.631578] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [145.631952] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [145.632563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.632694] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.632814] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [145.632927] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.633046] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [145.633260] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.633498] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.633642] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.633786] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.633893] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.634035] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.658581] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.658685] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.658860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.659076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.659471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.659686] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [145.659834] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.660053] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.660254] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [145.661981] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.662100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.665187] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [145.665783] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.665845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.666206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.666338] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [145.666344] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [145.666443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.666762] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.666871] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [145.666875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [145.666966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.667298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.667414] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [145.667419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [145.667514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.667831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.667941] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [145.667951] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [145.668058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.668377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [145.668473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.668890] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.669016] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [145.669136] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.669268] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [145.669375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [145.674646] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.674668] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.676055] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [145.680382] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.680398] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.681809] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [145.683272] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [145.684780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [145.686341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [145.686457] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [145.686572] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [145.686682] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [145.705246] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [145.705254] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [145.705257] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [145.705260] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [145.705272] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [145.705366] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [145.706749] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [145.706840] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [145.708329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [145.708435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [145.708540] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.708636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.709059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.709174] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [145.709179] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [145.709296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.762271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [145.781855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [145.781861] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [145.781948] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [145.799017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [145.799021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [145.799118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.799250] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.799609] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [145.799618] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [145.800013] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [145.800619] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.800765] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.800892] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [145.801020] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.801142] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [145.801351] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.801580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.801728] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.801891] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.801997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.802152] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.826782] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.826920] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.827135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.827347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.827727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.827942] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [145.828110] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.828361] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.828560] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [145.830288] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.830390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.832974] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [145.833575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.833640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.834016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.834138] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [145.834146] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [145.834261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.834581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.834691] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [145.834696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [145.834789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.835114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.835236] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [145.835241] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [145.835328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.835642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.835751] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [145.835762] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [145.835855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.836173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [145.836299] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.836679] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.836797] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [145.836911] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.837042] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [145.837163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [145.842387] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.842407] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.843825] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [145.848311] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.848325] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [145.849811] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [145.851271] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [145.852780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [145.854340] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [145.854453] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [145.854562] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [145.854675] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [145.873248] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [145.873257] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [145.873261] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [145.873264] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [145.873278] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [145.873364] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [145.874752] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [145.874843] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [145.876331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [145.876439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [145.876546] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.876642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.877063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.877178] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [145.877183] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [145.877295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.930372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [145.949633] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [145.949640] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [145.949729] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [145.966712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [145.966715] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [145.966803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.966931] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.967338] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [145.967347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [145.967687] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [145.968307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.968753] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.968873] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [145.968988] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.969122] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [145.969332] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.969557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.969696] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [145.969839] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.969937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.970079] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.994656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.994760] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.994937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.995156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.995547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.995755] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [145.995904] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.996170] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.996378] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [145.998105] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.998208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.001270] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [146.001868] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.001929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.002313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.002439] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [146.002445] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [146.002545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.002863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.002973] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [146.002978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [146.003086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.003422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.003529] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [146.003533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [146.003619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.003940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.004063] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.004486] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [146.004496] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [146.004595] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [146.005469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.005607] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.005725] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [146.005841] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.005952] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [146.006151] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.006400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.006548] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.006699] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.006807] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.006938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [146.031547] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.031723] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [146.032056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [146.032417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.032896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.033235] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [146.033497] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.033804] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.034114] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [146.036549] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.036698] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.039414] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [146.039934] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.039994] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.040318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [146.040435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.040827] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.040951] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [146.041079] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.041219] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [146.041316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [146.046533] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.046565] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.047951] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [146.052814] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.052833] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.054407] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [146.055876] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [146.057601] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [146.059328] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [146.059512] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [146.059682] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [146.059843] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [146.078949] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [146.078957] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [146.078961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [146.078963] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [146.078976] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [146.079082] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [146.080612] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [146.080707] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [146.082197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [146.082305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [146.082411] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.082507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.082921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.083035] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [146.083040] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [146.083138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.136098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [146.155288] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [146.155295] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [146.155385] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [146.172378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [146.172381] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [146.172472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.172597] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.172955] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [146.172964] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [146.173354] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [146.173959] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.174427] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.174546] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [146.174661] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.174772] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [146.174957] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.175198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.175348] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.175500] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.175606] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.175739] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [146.200413] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.200516] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [146.200693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [146.200886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.201291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.201505] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [146.201654] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.201876] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.202088] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [146.203837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.203941] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.207026] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [146.207635] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.207695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.208059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.208193] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [146.208199] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [146.208299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.208617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.208729] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [146.208733] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [146.208830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.209162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.209278] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [146.209283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [146.209379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.209694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.209801] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [146.209812] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [146.209902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.210226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [146.210351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.210737] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.210857] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [146.210971] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.211105] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [146.211210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [146.216387] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.216407] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.217829] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [146.222351] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.222367] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.223813] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [146.225272] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [146.226778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [146.228341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [146.228459] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [146.228572] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [146.228680] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [146.247249] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [146.247257] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [146.247260] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [146.247263] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [146.247276] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [146.247369] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [146.248751] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [146.248841] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [146.250311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [146.250417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [146.250520] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.250617] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.251035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.251145] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [146.251151] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [146.251266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.304252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [146.323823] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [146.323829] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [146.323916] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [146.340942] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [146.340945] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [146.341050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.341188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.341579] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [146.341586] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [146.341961] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [146.342590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.343043] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.343175] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [146.343301] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.343422] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [146.343618] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.343852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.343997] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.344165] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.344280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.344417] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [146.368965] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.369104] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [146.369287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [146.369479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.369848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.370081] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [146.370256] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.370479] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.370675] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [146.372397] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.372498] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.375064] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [146.375658] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.375718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.376083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.376213] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [146.376221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [146.376331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.376647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.376754] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [146.376759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [146.376850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.377176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.377308] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [146.377312] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [146.377409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.377728] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.377838] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [146.377847] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [146.377944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.378269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [146.378387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.378779] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.378896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [146.379019] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.379137] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [146.379265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [146.384386] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.384405] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.385828] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [146.390341] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.390355] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.391808] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [146.393278] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [146.394778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [146.396333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [146.396446] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [146.396557] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [146.396670] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [146.415247] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [146.415254] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [146.415257] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [146.415260] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [146.415272] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [146.415366] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [146.416753] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [146.416842] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [146.418330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [146.418438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [146.418542] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.418640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.419063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.419177] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [146.419182] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [146.419304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.472246] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [146.491882] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [146.491889] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [146.491977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [146.508959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [146.508963] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [146.509063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.509204] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.509612] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [146.509621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [146.509984] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [146.510616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.511068] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.511207] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [146.511329] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.511450] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [146.511646] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.511879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.512035] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.512195] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.512306] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.512444] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [146.537053] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.537160] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [146.537342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [146.537539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.537915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.538147] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [146.538325] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.538551] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.538747] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [146.540479] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.540581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.543639] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [146.544244] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.544310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.544675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.544794] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [146.544799] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [146.544890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.545209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.545334] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [146.545339] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [146.545434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.545751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.545860] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [146.545864] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [146.545955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.546293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.546411] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [146.546421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [146.546519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.546828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [146.546934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.547356] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.547486] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [146.547601] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.547712] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [146.547808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [146.552907] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.552929] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.554367] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [146.558374] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.558388] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.559808] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [146.561265] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [146.562774] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [146.564344] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [146.564460] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [146.564570] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [146.564672] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [146.583248] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [146.583256] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [146.583259] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [146.583262] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [146.583276] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [146.583368] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [146.584754] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [146.584844] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [146.586338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [146.586445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [146.586549] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.586647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.587068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.587184] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [146.587190] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [146.587305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.640317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [146.659807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [146.659815] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [146.659902] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [146.677043] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [146.677047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [146.677153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.677279] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.677641] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [146.677650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [146.678060] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [146.678666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.679109] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.679246] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [146.679362] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.679476] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [146.679663] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.679885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.680031] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.680186] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.680299] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.680435] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [146.705038] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.705169] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [146.705345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [146.705542] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.705914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.706150] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [146.706321] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.706551] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.706751] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [146.708463] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.708568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.711635] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [146.712241] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.712318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.712677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.712797] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [146.712805] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [146.712894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.713211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.713334] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [146.713340] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [146.713443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.713759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.713869] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [146.713873] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [146.713966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.714304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.714430] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [146.714440] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [146.714535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.714843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [146.714948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.715370] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.715496] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [146.715610] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.715723] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [146.715821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [146.720904] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.720925] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.722383] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [146.726864] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.726879] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.728380] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [146.729794] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [146.731368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [146.732926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [146.733059] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [146.733175] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [146.733288] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [146.751651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [146.751660] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [146.751665] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [146.751667] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [146.751679] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [146.751773] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [146.753227] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [146.753316] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [146.754745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [146.754856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [146.754968] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.755085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.755516] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.755622] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [146.755627] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [146.755718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.807986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [146.827566] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [146.827573] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [146.827659] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [146.844812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [146.844815] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [146.844907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.845064] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.845447] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [146.845457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [146.845823] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [146.846454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.846890] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.847016] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [146.847138] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.847272] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [146.847468] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.847699] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.847848] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.848001] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.848120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.848276] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [146.872912] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.873034] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [146.873212] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [146.873406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.873773] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.873985] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [146.874164] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.874416] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.874614] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [146.876337] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.876438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.879503] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [146.880104] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.880171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.880539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.880658] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [146.880663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [146.880755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.881081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.881206] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [146.881210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [146.881306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.881625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.881737] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [146.881741] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [146.881836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.882166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.882285] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [146.882295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [146.882392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.882699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [146.882803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.883225] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.883367] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [146.883482] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [146.883594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [146.883691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [146.888886] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.888899] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.890383] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [146.894788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.894803] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [146.896279] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [146.897765] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [146.899346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [146.900765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [146.900877] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [146.900985] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [146.901107] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [146.919651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [146.919659] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [146.919662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [146.919665] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [146.919677] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [146.919770] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [146.921229] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [146.921317] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [146.922744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [146.922857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [146.922969] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.923087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.923524] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.923640] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [146.923645] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [146.923739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.974266] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [146.993773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [146.993780] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [146.993867] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [147.010978] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [147.010982] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [147.011088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.011247] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [147.011613] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [147.011623] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [147.012013] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [147.012637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.013081] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.013224] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [147.013348] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.013468] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [147.013662] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [147.013897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [147.014055] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.014221] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [147.014329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [147.014467] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [147.039058] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [147.039161] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [147.039338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [147.039531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [147.039906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [147.040148] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [147.040323] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [147.040547] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [147.040746] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [147.042467] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.042569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.045631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [147.046238] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [147.046304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.046672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.046790] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [147.046796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [147.046889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.047205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.047341] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [147.047346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [147.047444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.047760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.047873] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [147.047877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [147.047972] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.048306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.048429] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [147.048439] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [147.048534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.048843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [147.048947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.049371] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.049494] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [147.049609] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.049720] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [147.049817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [147.054909] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.054929] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.056384] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [147.060853] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.060866] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.062338] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [147.063793] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [147.065368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [147.066920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [147.067048] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [147.067167] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [147.067276] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [147.085651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [147.085659] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [147.085662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [147.085665] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [147.085679] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [147.085773] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [147.087225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [147.087318] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [147.088744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [147.088856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [147.088967] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.089085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.089525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.089637] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [147.089642] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [147.089733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.140344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [147.160044] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [147.160051] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [147.160146] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [147.177239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [147.177242] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [147.177332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.177455] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [147.177815] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [147.177824] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [147.178218] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [147.178817] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.179304] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.179432] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [147.179560] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.179675] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [147.179862] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [147.180097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [147.180247] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.180409] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [147.180534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [147.180669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [147.204557] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [147.204645] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [147.204796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [147.204968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [147.205335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [147.205531] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [147.205705] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [147.205926] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [147.206136] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [147.207750] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.207852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.210394] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [147.210992] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [147.211074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.211424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.211585] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [147.211590] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [147.211681] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.212000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.212120] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [147.212125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [147.212236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.212556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.212667] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [147.212671] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [147.212765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.213112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.213258] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [147.213269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [147.213360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.213691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [147.213808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.214229] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.214381] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [147.214498] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.214622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [147.214721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [147.219837] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.219851] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.221304] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [147.225372] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.225386] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.226765] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [147.228239] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [147.229743] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [147.231275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [147.231376] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [147.231476] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [147.231569] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [147.249951] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [147.249958] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [147.249962] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [147.249965] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [147.249978] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [147.250082] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [147.251588] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [147.251679] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [147.253036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [147.253144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [147.253249] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.253344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.253756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.253863] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [147.253868] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [147.253956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.304501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [147.324129] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [147.324139] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [147.324228] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [147.341334] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [147.341338] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [147.341433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.341559] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [147.341919] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [147.341929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [147.342316] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [147.342927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.343388] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.343509] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [147.343633] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.343746] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [147.343934] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [147.344202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [147.344347] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.344502] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [147.344601] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [147.344749] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [147.369387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [147.369491] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [147.369666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [147.369859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [147.370248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [147.370462] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [147.370653] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [147.370896] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [147.371120] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [147.372842] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.372950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.376052] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [147.376660] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [147.376720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.377087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.377222] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [147.377228] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [147.377326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.377653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.377817] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [147.377822] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [147.377923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.378272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.378378] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [147.378382] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [147.378480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.378798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.378915] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [147.378929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [147.379077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.379395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [147.379501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.379912] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.380049] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [147.380176] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.380295] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [147.380433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [147.385688] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.385709] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.387054] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [147.391376] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.391391] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.392793] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [147.394273] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [147.395756] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [147.397339] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [147.397453] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [147.397563] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [147.397673] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [147.416248] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [147.416256] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [147.416259] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [147.416263] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [147.416276] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [147.416368] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [147.417736] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [147.417836] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [147.419360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [147.419470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [147.419576] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.419674] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.420095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.420212] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [147.420217] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [147.420314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.473247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [147.492812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [147.492816] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [147.492904] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [147.509889] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [147.509893] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [147.509980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.510127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [147.510491] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [147.510498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [147.510874] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [147.511501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.511944] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.512112] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [147.512243] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.512365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [147.512558] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [147.512785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [147.512936] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.513144] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [147.513251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [147.513386] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [147.538053] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [147.538218] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [147.538393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [147.538584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [147.538950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [147.539184] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [147.539337] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [147.539568] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [147.539770] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [147.541501] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.541601] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.544284] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [147.544809] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [147.544877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.545235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.545355] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [147.545366] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [147.545491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.545844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.545962] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [147.545967] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [147.546079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.546405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.546542] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [147.546549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [147.546660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.546990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.547120] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [147.547146] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [147.547252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.547562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [147.547704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.548102] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.548229] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [147.548363] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.548484] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [147.548589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [147.553688] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.553709] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.555053] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [147.559374] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.559388] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.560778] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [147.562252] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [147.563764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [147.565349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [147.565471] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [147.565587] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [147.565695] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [147.584248] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [147.584257] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [147.584262] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [147.584265] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [147.584277] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [147.584370] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [147.585738] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [147.585840] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [147.587328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [147.587436] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [147.587541] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.587639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.588064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.588176] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [147.588182] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [147.588284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.641102] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [147.660733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [147.660741] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [147.660830] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [147.677852] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [147.677855] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [147.677945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.678085] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [147.678460] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [147.678472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [147.678835] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [147.679464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.679907] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.680096] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [147.680231] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.680361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [147.680565] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [147.680790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [147.680940] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.681141] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [147.681253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [147.681396] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [147.706064] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [147.706225] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [147.706398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [147.706587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [147.706953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [147.707185] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [147.707334] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [147.707555] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [147.707756] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [147.709512] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.709620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.712718] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [147.713322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [147.713396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.713759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.713912] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [147.713922] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [147.714026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.714369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.714482] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [147.714486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [147.714579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.714905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.715070] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [147.715075] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [147.715171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.715496] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.715613] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [147.715625] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [147.715711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.716033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [147.716141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.716531] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.716650] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [147.716773] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.716887] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [147.716988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [147.722039] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.722054] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.723521] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [147.727998] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.728015] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.729463] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [147.730939] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [147.732538] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [147.734040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [147.734155] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [147.734266] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [147.734370] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [147.752951] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [147.752960] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [147.752963] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [147.752966] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [147.752980] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [147.753086] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [147.754588] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [147.754684] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [147.756035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [147.756143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [147.756246] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.756344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.756757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.756859] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [147.756864] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [147.756952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.807502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [147.827116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [147.827123] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [147.827217] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [147.844339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [147.844343] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [147.844437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.844563] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [147.844939] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [147.844948] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [147.845317] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [147.845927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.846389] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.846508] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [147.846630] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.846743] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [147.846929] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [147.847177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [147.847363] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.847510] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [147.847621] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [147.847753] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [147.872400] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [147.872503] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [147.872679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [147.872872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [147.873269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [147.873482] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [147.873680] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [147.873919] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [147.874147] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [147.875880] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.875986] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.879082] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [147.879710] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [147.879770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.880118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.880234] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [147.880241] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [147.880336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.880679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.880811] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [147.880816] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [147.880909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.881260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.881374] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [147.881379] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [147.881476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.881804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.881958] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [147.881969] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [147.882078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.882404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [147.882520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.882920] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.883102] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [147.883232] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [147.883357] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [147.883459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [147.888692] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.888713] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.890222] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [147.894586] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.894599] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [147.896047] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [147.897551] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [147.899048] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [147.900581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [147.900695] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [147.900814] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [147.900917] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [147.919247] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [147.919255] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [147.919259] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [147.919262] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [147.919273] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [147.919368] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [147.920737] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [147.920843] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [147.922341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [147.922454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [147.922559] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.922657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.923081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.923192] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [147.923198] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [147.923300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.976185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [147.995816] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [147.995823] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [147.995912] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [148.012914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [148.012918] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [148.013013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.013143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [148.013528] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [148.013540] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [148.013898] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [148.014527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [148.014969] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.015138] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [148.015265] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.015386] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [148.015592] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [148.015824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [148.015975] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.016193] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [148.016304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [148.016447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [148.041079] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [148.041228] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [148.041406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [148.041596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [148.041958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [148.042195] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [148.042345] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [148.042579] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [148.042781] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [148.044561] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [148.044664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [148.047743] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [148.048350] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [148.048421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.048788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.048939] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [148.048946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [148.049050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.049391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.049501] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [148.049505] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [148.049598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.049921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.050089] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [148.050093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [148.050194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.050517] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.050636] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [148.050647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [148.050739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.051061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [148.051210] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [148.051566] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.051687] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [148.051811] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.051930] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [148.052048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [148.057061] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.057081] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.058551] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [148.063056] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.063071] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.064556] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [148.066050] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [148.067628] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [148.069200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [148.069313] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [148.069425] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [148.069530] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [148.087949] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [148.087958] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [148.087962] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [148.087965] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [148.087977] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [148.088083] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [148.089617] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [148.089715] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [148.091206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [148.091315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [148.091420] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [148.091519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [148.091932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.092048] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [148.092053] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [148.092153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.145224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [148.165251] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [148.165259] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [148.165348] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [148.182531] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [148.182534] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [148.182622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.182741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [148.183119] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [148.183128] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [148.183484] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [148.184115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [148.184552] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.184677] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [148.184797] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.184916] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [148.185139] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [148.185369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [148.185518] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.185668] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [148.185772] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [148.185907] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [148.210536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [148.210641] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [148.210817] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [148.211033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [148.211407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [148.211618] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [148.211778] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [148.212041] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [148.212243] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [148.213971] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [148.214093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [148.217167] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [148.217778] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [148.217843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.218204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.218329] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [148.218336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [148.218442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.218764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.218879] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [148.218884] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [148.218979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.219312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.219428] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [148.219433] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [148.219533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.219854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.219966] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [148.219976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [148.220104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.220420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [148.220530] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [148.220935] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.221079] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [148.221206] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.221333] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [148.221446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [148.226693] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.226714] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.228227] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [148.232688] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.232703] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.234057] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [148.235556] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [148.237042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [148.238596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [148.238711] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [148.238827] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [148.238942] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [148.257652] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [148.257659] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [148.257662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [148.257665] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [148.257678] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [148.257770] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [148.259226] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [148.259311] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [148.260733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [148.260844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [148.260956] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [148.261071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [148.261491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.261602] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [148.261606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [148.261696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.312236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [148.331785] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [148.331790] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [148.331882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [148.349005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [148.349008] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [148.349107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.349239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [148.349613] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [148.349619] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [148.349998] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [148.350623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [148.351069] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.351200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [148.351320] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.351443] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [148.351636] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [148.351868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [148.352019] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.352171] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [148.352280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [148.352412] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [148.377139] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [148.377304] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [148.377481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [148.377676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [148.378088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [148.378307] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [148.378465] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [148.378675] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [148.378882] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [148.380600] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [148.380707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [148.383773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [148.384378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [148.384456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.384814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.384934] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [148.384945] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [148.385055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.385380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.385493] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [148.385497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [148.385599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.385923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.386040] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [148.386044] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [148.386144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.386463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.386570] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [148.386582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [148.386680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.386988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [148.387109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [148.387504] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.387633] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [148.387762] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.387887] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [148.387995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [148.393041] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.393056] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.395023] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [148.399380] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.399394] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.400785] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [148.402268] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [148.403747] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [148.405300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [148.405412] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [148.405518] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [148.405621] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [148.423949] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [148.423959] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [148.423962] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [148.423965] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [148.423978] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [148.424083] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [148.425587] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [148.425676] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [148.427034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [148.427140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [148.427243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [148.427341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [148.427752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.427853] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [148.427858] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [148.427944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.480765] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [148.500366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [148.500373] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [148.500467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [148.517567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [148.517570] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [148.517662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.517793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [148.518188] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [148.518197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [148.518553] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [148.519169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [148.519310] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.519428] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [148.519544] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.519660] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [148.519845] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [148.520140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [148.520294] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.520439] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [148.520539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [148.520670] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [148.545358] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [148.545466] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [148.545649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [148.545848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [148.546240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [148.546457] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [148.546614] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [148.546847] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [148.547064] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [148.548801] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [148.548910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [148.551986] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [148.552606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [148.552672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.553043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.553168] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [148.553174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [148.553277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.553596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.553712] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [148.553716] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [148.553818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.554148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.554265] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [148.554270] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [148.554369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.554706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.554821] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [148.554831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [148.554931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.555254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [148.555361] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [148.555774] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.555896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [148.556022] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.556146] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [148.556258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [148.561386] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.561406] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.562796] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [148.567054] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.567069] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.568547] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [148.570032] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [148.571611] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [148.573040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [148.573154] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [148.573265] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [148.573374] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [148.591953] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [148.591961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [148.591964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [148.591967] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [148.591980] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [148.592080] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [148.593566] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [148.593652] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [148.595034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [148.595140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [148.595244] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [148.595339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [148.595754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.595857] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [148.595861] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [148.595947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.646664] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [148.665844] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [148.665851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [148.665944] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [148.682962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [148.682966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [148.683068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.683212] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [148.683626] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [148.683636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [148.683994] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [148.684620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [148.685068] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.685199] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [148.685324] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.685441] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [148.685643] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [148.685887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [148.686048] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.686206] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [148.686311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [148.686449] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [148.711148] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [148.711283] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [148.711462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [148.711655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [148.712045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [148.712266] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [148.712429] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [148.712665] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [148.712872] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [148.714610] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [148.714720] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [148.717788] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [148.718393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [148.718465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.718825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.718947] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [148.718953] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [148.719063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.719386] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.719494] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [148.719498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [148.719596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.719918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.720041] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [148.720045] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [148.720147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.720465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.720574] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [148.720584] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [148.720677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.720986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [148.721119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [148.721502] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.721622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [148.721747] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.721872] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [148.721983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [148.727059] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.727079] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.728555] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [148.732865] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.732878] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.734347] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [148.736377] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [148.737943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [148.739503] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [148.739616] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [148.739728] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [148.739837] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [148.758248] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [148.758256] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [148.758259] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [148.758262] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [148.758275] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [148.758365] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [148.759739] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [148.759826] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [148.761311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [148.761422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [148.761528] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [148.761624] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [148.762046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.762163] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [148.762168] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [148.762268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.815343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [148.834845] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [148.834852] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [148.834945] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [148.852110] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [148.852114] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [148.852213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.852347] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [148.852731] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [148.852740] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [148.853115] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [148.853714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [148.853868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.853999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [148.854145] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.854275] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [148.854475] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [148.854717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [148.854871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.855037] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [148.855151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [148.855293] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [148.880043] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [148.880211] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [148.880389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [148.880584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [148.880958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [148.881196] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [148.881351] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [148.881589] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [148.881790] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [148.883516] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [148.883620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [148.886690] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [148.887310] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [148.887389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.887753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.887879] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [148.887890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [148.887988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.888320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.888439] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [148.888444] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [148.888545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.888869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.888987] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [148.888991] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [148.889101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.889425] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.889539] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [148.889552] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [148.889652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.889968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [148.890095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [148.890483] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.890604] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [148.890725] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [148.890843] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [148.890945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [148.896037] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.896051] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.897530] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [148.901862] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.901875] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [148.903375] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [148.904777] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [148.906343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [148.907735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [148.907845] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [148.907953] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [148.908080] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [148.926651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [148.926660] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [148.926663] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [148.926666] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [148.926680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [148.926766] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [148.928225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [148.928314] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [148.929732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [148.929841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [148.929952] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [148.930068] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [148.930496] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.930608] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [148.930613] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [148.930703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.982549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [149.002121] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [149.002128] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [149.002220] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [149.019266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [149.019269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [149.019363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [149.019494] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [149.019905] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [149.019915] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [149.020276] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [149.020881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [149.021058] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [149.021191] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [149.021317] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [149.021440] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [149.021640] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [149.021887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [149.022041] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [149.022201] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [149.022314] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [149.022459] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [149.047112] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [149.047258] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [149.047441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [149.047636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [149.048041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [149.048260] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [149.048414] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [149.048649] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [149.048859] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [149.050583] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [149.050688] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [149.053757] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [149.054363] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [149.054438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [149.054792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [149.054915] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [149.054923] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [149.055026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [149.055352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [149.055469] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [149.055474] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [149.055572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [149.055896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [149.056017] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [149.056022] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [149.056124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [149.056452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [149.056567] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [149.056578] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [149.056671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [149.056979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [149.057101] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [149.057494] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [149.057624] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [149.057751] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [149.057876] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [149.057986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [149.063037] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [149.063051] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [149.064522] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [149.068874] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [149.068887] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [149.070383] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [149.071783] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [149.073368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [149.074923] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [149.075055] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [149.075174] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [149.075283] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [149.093651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [149.093659] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [149.093663] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [149.093665] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [149.093679] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [149.093765] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [149.095225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [149.095313] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [149.096733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [149.096844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [149.096956] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [149.097073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [149.097496] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [149.097599] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [149.097604] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [149.097691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [149.150305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [149.169767] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [149.169772] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [149.169865] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [149.186973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [149.186977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [149.187079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [149.187207] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [149.187215] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [149.187343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [149.187673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [149.187789] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [149.187793] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [149.187894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [149.188224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [149.188342] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [149.188346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [149.188441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [149.188760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [149.188875] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [149.188878] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [149.188975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [149.189304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [149.189416] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [149.189423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [149.189946] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [149.190508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [149.190850] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [149.190973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [149.191100] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [149.191230] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [149.191429] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [149.191646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [149.191800] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [149.191958] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [149.192078] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [149.192217] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [149.236601] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:DP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [149.237367] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 533250KHz

<7> [149.238304] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30

<7> [149.238871] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1999688 available 2160000

<7> [149.239442] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:DP-1] SDP split enable: no

<7> [149.239868] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [149.240444] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI B/PHY B] [CRTC:80:pipe A]

<7> [149.240902] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [149.241387] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [149.241512] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [149.241620] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [149.241726] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7766016/8388608 link 517734/524288)

<7> [149.241832] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080)

<7> [149.241939] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [149.242066] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840)

<7> [149.242176] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000)

<7> [149.242280] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840)

<7> [149.242382] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000)

<7> [149.242492] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888)

<7> [149.242602] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920)

<7> [149.242707] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160)

<7> [149.242810] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2222)

<7> [149.242919] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2160)

<7> [149.243033] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2222)

<7> [149.243143] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2214)

<7> [149.243249] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2219)

<7> [149.243353] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840)

<7> [149.243460] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000)

<7> [149.243567] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840)

<7> [149.243670] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000)

<7> [149.243774] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888)

<7> [149.243879] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920)

<7> [149.243985] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160)

<7> [149.244104] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2222)

<7> [149.244214] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2160)

<7> [149.244321] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2222)

<7> [149.244426] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2214)

<7> [149.244529] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2219)

<7> [149.244636] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [149.244743] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [149.244848] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [149.244952] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in has_audio (expected no, found yes)

<7> [149.245070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer

<7> [149.245178] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [149.245180] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [149.245182] found: 10 00 07 00 69 14 00 01 00 00 00 00 00 00 00 00

<7> [149.245183] found: 1e 6d 07 77 4c 47 20 48 44 52 20 34 4b 09 07 07

<7> [149.245185] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [149.245290] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 533250)

<7> [149.245394] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 533250)

<7> [149.245498] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [149.245605] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.vmin (expected 0, found 2221)

<7> [149.245710] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.vmax (expected 0, found 3332)

<7> [149.245813] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.flipline (expected 0, found 2222)

<7> [149.245915] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in vrr.guardband (expected 0, found 62)

<7> [149.246028] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [149.246184] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [149.246297] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [149.246419] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027

<7> [149.246512] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69

<7> [149.246605] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [149.246700] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 10, 14, 20, 20, 0, 0, 0, 6, 0

<7> [149.246795] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 311, 435, 621, 621, 0, 0, 45, 187, 201

<7> [149.246886] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 344, 480, 685, 685, 0, 0, 46, 207, 207

<7> [149.246980] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2133000 num active planes 1

<7> [149.247105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 2240

<7> [149.247211] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 2240

<7> [149.247320] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 2240

<7> [149.247425] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 2240

<7> [149.247528] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2240

<7> [149.247631] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 2240

<7> [149.247736] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2240

<7> [149.247851] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (266625 kHz) > [CRTC:80:pipe A] min cdclk (0 kHz)

<7> [149.247957] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (41661 kHz) > old min cdclk (0 kHz)

<7> [149.248078] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [149.248185] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz

<7> [149.248291] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [149.248396] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:80:pipe A] allocated DPLL 0

<7> [149.248499] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:80:pipe A] reserving DPLL 0

<7> [149.248605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset]

<7> [149.248712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [149.248819] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [149.248923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [149.249038] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [149.249144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [149.249250] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [149.249354] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7766016, data_n: 8388608, link_m: 517734, link_n: 524288, tu: 64

<7> [149.249458] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [149.249562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [149.249669] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [149.249774] ELD: 10 00 07 00 69 14 00 01 00 00 00 00 00 00 00 00

<7> [149.249775] ELD: 1e 6d 07 77 4c 47 20 48 44 52 20 34 4b 09 07 07

<7> [149.249776] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 2221, vmax: 3332, pipeline full: 0, guardband: 62 flipline: 2222, vmin vblank: 2160, vmax vblank: 3270

<7> [149.249881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9

<7> [149.249987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9

<7> [149.250102] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=533250, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2222 vs=2214-2219 vt=2222, flags=0x9

<7> [149.250205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x40 0x9

<7> [149.250307] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=533250, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2222 vs=2214-2219 vt=2222, flags=0x9

<7> [149.250414] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3840x2160+0+0, pixel rate 533250

<7> [149.250520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 61, ips linetime: 0

<7> [149.250623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [149.250725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [149.250830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [149.250934] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [149.251041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [149.251146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [149.251252] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [149.251357] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [149.251460] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [149.251562] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [149.251661] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [149.251763] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [149.251868] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [149.251970] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [149.252082] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [149.252189] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [149.252293] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:293] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [149.252397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [149.252499] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0

<7> [149.252601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [149.252705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [149.252809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [149.252911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [149.253021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no

<7> [149.265413] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [149.265495] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [149.265617] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [149.265748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [149.266034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [149.266226] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [149.266342] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [149.266523] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [149.266693] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [149.268302] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [149.268408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [149.271477] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [149.272099] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [149.273783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [149.273892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [149.274173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [149.274317] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [149.274447] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [149.274575] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [149.274701] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [149.274818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A

<7> [149.274954] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [149.275199] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=768

<7> [149.275313] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI B/PHY B]

<7> [149.275418] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:237:DP-MST A]

<7> [149.275521] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DP-MST B]

<7> [149.275621] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:239:DP-MST C]

<7> [149.275722] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DP-MST D]

<7> [149.275823] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DDI TC1/PHY TC1]

<7> [149.275922] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:256:DP-MST A]

<7> [149.276039] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:257:DP-MST B]

<7> [149.276139] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:258:DP-MST C]

<7> [149.276240] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:259:DP-MST D]

<7> [149.276339] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:263:DDI TC2/PHY TC2]

<7> [149.276437] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST A]

<7> [149.276538] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST B]

<7> [149.276637] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST C]

<7> [149.276738] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DP-MST D]

<7> [149.276838] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DDI TC3/PHY TC3]

<7> [149.276939] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST A]

<7> [149.277061] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST B]

<7> [149.277160] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST C]

<7> [149.277262] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST D]

<7> [149.277361] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DDI TC4/PHY TC4]

<7> [149.277462] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST A]

<7> [149.277563] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST B]

<7> [149.277665] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST C]

<7> [149.277765] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST D]

<7> [149.277861] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [149.277974] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [149.278096] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [149.278204] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [149.278313] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [149.278424] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [149.278535] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [149.278655] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [149.278831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [149.278947] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:80:pipe A]

<7> [149.279063] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [149.279234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [149.286030] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [149.286043] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [149.287451] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [149.291720] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [149.291733] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [149.291750] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Using LINK_BW_SET value 14

<7> [149.294611] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [149.294798] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Using DP training pattern TPS1

<7> [149.298505] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0

<7> [149.298619] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0

<7> [149.302357] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 0/0/0/0

<7> [149.302453] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 2/2/2/2, pre-emphasis levels: 0/0/0/0

<7> [149.306205] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Clock recovery OK

<7> [149.306302] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Using DP training pattern TPS3

<7> [149.310655] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing request: 3/3/3/3, pre-emphasis request: 0/0/0/0

<7> [149.310775] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 3(max)/3(max)/3(max)/3(max), pre-emphasis levels: 0/0/0/0

<7> [149.315252] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Channel EQ done. DP Training successful

<7> [149.315357] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [149.316362] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [149.316525] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B] Enable audio codec on [CRTC:80:pipe A], 32 bytes ELD

<7> [149.333140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [149.333262] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [149.333412] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic Maud, Naud

<7> [149.333577] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 34283520 bytes of contiguous stolen space for FBC, limit: 1

<7> [149.333693] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]

<7> [149.346865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [149.350079] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [149.350476] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:DP-1]

<7> [149.350688] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A]

<7> [149.351096] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI B/PHY B] Fec status: 0

<7> [149.351302] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<6> [149.352216] [IGT] kms_pm_rpm: finished subtest basic-pci-d3-state, SUCCESS

<7> [149.352647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [149.352963] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:293] from all active usage due to RMFB ioctl

<7> [149.357662] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [149.357714] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [149.359293] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [149.364220] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [149.364233] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [149.366107] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [149.367720] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [149.369827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [149.371853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [149.372272] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [149.372614] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [149.372700] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [149.393065] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [149.393081] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [149.393091] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [149.393097] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [149.393116] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [149.393303] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [149.394934] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [149.395114] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [149.396766] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:236:DP-1] Same epoch counter 1

<7> [149.396776] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [149.447245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [149.456991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [149.457011] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [149.457232] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [149.464442] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [149.464446] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [149.464534] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:249:HDMI-A-1] Same epoch counter 8

<7> [149.464885] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:293] is removed

<7> [149.464999] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0

<7> [149.465111] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [149.465206] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 10, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [149.465302] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 311, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [149.465396] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 344, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [149.465489] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0

<7> [149.465598] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 0

<7> [149.465706] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 0

<7> [149.465813] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 0

<7> [149.465918] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 0

<7> [149.466030] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0

<7> [149.466134] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 0

<7> [149.466236] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0

<7> [149.483460] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]

<7> [149.501681] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [149.502319] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:255:DP-2] Same epoch counter 1

<7> [149.502349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [149.502810] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:264:DP-3] Same epoch counter 1

<7> [149.502826] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [149.503290] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:273:DP-4] Same epoch counter 1

<7> [149.503305] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [149.503708] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:282:DP-5] Same epoch counter 1

<7> [149.504681] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027

<7> [149.504986] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [149.505336] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 10, 14, 20, 20, 0, 0, 0, 6, 0

<7> [149.505604] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 311, 435, 621, 621, 0, 0, 45, 187, 201

<7> [149.505845] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 344, 480, 685, 685, 0, 0, 46, 207, 207

<7> [149.506129] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2133000 num active planes 1

<7> [149.506407] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 2240

<7> [149.506662] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 2240

<7> [149.506909] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 2240

<7> [149.507170] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 2240

<7> [149.507399] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2240

<7> [149.507607] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 2240

<7> [149.507804] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2240

<7> [149.508207] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 34283520 bytes of contiguous stolen space for FBC, limit: 1

<7> [149.508389] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]

<6> [149.533917] Console: switching to colour frame buffer device 480x135

Results for igt@kms_pm_rpm@basic-pci-d3-state