Results for igt@kms_frontbuffer_tracking@basic

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

Detail	Value
Igt-Version	IGT-Version: 1.28-gd1db7333d (x86_64) (Linux: 6.6.0-rc5-linus-v6.6-rc5-g94f6f0550c62+ x86_64)
Out	Opened device: /dev/dri/card0 FBC last action not supported Can't test PSR: no usable eDP screen. Can't test DRRS: no usable screen. Starting subtest: basic Subtest basic: SUCCESS (2.286s)
Err	Starting subtest: basic Subtest basic: SUCCESS (2.286s)
Dmesg	<6> [269.833575] Console: switching to colour dummy device 80x25 <6> [269.834607] [IGT] kms_frontbuffer_tracking: executing <7> [270.037977] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [270.039640] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [270.039914] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [270.044991] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] <7> [270.045004] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:65:VGA-1] force=1 <7> [270.045276] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 <7> [270.045565] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug <7> [270.046064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [270.046416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [270.046909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [270.047219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [270.047230] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [270.047522] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [270.049325] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [270.049336] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [270.049611] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] <7> [270.049887] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] disconnected <7> [270.050691] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:HDMI-A-1] <7> [270.050704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:68:HDMI-A-1] <7> [270.101903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [270.118252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [270.118263] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [270.118445] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [270.134258] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [270.134266] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [270.134456] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:HDMI-A-1] disconnected <7> [270.134959] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-1] <7> [270.134968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:76:DP-1] <7> [270.135166] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-1] disconnected <7> [270.136125] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:81:HDMI-A-2] <7> [270.136137] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:81:HDMI-A-2] <7> [270.136695] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [270.136966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [270.137499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [270.137771] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [270.137780] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [270.138046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [270.139814] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [270.139824] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [270.140100] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:81:HDMI-A-2] disconnected <7> [270.141028] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-3] <7> [270.141040] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:85:HDMI-A-3] <7> [270.141521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [270.141724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [270.142099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [270.142334] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [270.142344] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [270.142559] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [270.143981] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [270.143989] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [270.144183] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-3] disconnected <7> [270.144755] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:89:DP-2] <7> [270.144764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:89:DP-2] <7> [270.144974] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:89:DP-2] disconnected <7> [270.145546] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:DP-3] <7> [270.145555] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:93:DP-3] <7> [270.145764] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:DP-3] disconnected <7> [270.146068] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:LVDS-1] <7> [270.146077] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:61:LVDS-1] ELD monitor <7> [270.146084] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:61:LVDS-1] ELD size 20, SAD count 0 <7> [270.146155] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:LVDS-1] probed modes : <7> [270.146160] [drm:drm_mode_debug_printmodeline] Modeline "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 <7> [270.146182] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] <7> [270.146189] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:65:VGA-1] force=1 <7> [270.146456] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 <7> [270.146665] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug <7> [270.147053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [270.147273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [270.147674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [270.147864] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [270.147870] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [270.148059] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [270.149556] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [270.149565] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [270.149758] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] <7> [270.149951] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] disconnected <7> [270.150169] [drm:status_store] [CONNECTOR:65:VGA-1] force updated from 0 to 2 or reprobing <7> [270.150177] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] <7> [270.150184] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] status updated from disconnected to connected <7> [270.150527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [270.150818] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [270.151273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [270.151562] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [270.151584] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [270.151778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [270.153406] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [270.153424] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [270.153686] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] probed modes : <7> [270.153694] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [270.153701] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [270.153708] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [270.153714] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [270.153720] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [270.153779] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] <7> [270.153977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [270.154201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [270.154599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [270.154797] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [270.154813] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [270.155004] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [270.156567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [270.156585] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [270.156872] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] probed modes : <7> [270.156880] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [270.156887] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [270.156893] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [270.156899] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [270.156904] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [270.156939] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:HDMI-A-1] <7> [270.156947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:68:HDMI-A-1] <7> [270.208213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [270.224306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [270.224318] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [270.224516] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [270.240323] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [270.240332] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [270.240535] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:HDMI-A-1] disconnected <7> [270.240582] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-1] <7> [270.240590] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:76:DP-1] <7> [270.240799] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-1] disconnected <7> [270.240822] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:81:HDMI-A-2] <7> [270.240829] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:81:HDMI-A-2] <7> [270.241220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [270.241443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [270.241883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [270.242074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [270.242080] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [270.242292] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [270.243866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [270.243874] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [270.244073] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:81:HDMI-A-2] disconnected <7> [270.244103] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-3] <7> [270.244110] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:85:HDMI-A-3] <7> [270.244552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [270.244746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [270.245118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [270.245357] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [270.245367] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [270.245590] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [270.247012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [270.247019] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [270.247212] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-3] disconnected <7> [270.247241] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:89:DP-2] <7> [270.247248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:89:DP-2] <7> [270.247495] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:89:DP-2] disconnected <7> [270.247530] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:DP-3] <7> [270.247541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:93:DP-3] <7> [270.247780] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:DP-3] disconnected <7> [270.249144] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:99] <7> [270.249239] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:100] <7> [270.249429] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:101] <7> [270.249598] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:102] <7> [270.249734] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:103] <6> [270.251529] [IGT] kms_frontbuffer_tracking: starting subtest basic <7> [270.251722] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [270.254380] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:99] <7> [270.254478] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:100] <7> [270.254620] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:101] <7> [270.254757] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:102] <7> [270.254893] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:103] <7> [270.255057] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:104] <7> [270.306182] [drm:drm_mode_setcrtc] [CRTC:45:pipe A] <7> [270.306219] [drm:drm_mode_setcrtc] [CONNECTOR:61:LVDS-1] <7> [270.323511] [drm:drm_mode_setcrtc] [CRTC:60:pipe B] <7> [270.328335] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [270.328727] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [270.406084] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:104] from all active usage due to RMFB ioctl <7> [270.406171] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:primary A] because [FB:104] is removed <7> [270.423892] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:97] <7> [270.424604] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:104] <7> [270.424842] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:107] <7> [270.425096] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:108] <7> [270.589313] [drm:drm_mode_setcrtc] [CRTC:45:pipe A] <7> [270.589347] [drm:drm_mode_setcrtc] [CONNECTOR:61:LVDS-1] <7> [270.625078] [drm:drm_mode_setcrtc] [CRTC:60:pipe B] <7> [270.627635] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [270.628115] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [270.706066] [drm:drm_mode_setcrtc] [CRTC:45:pipe A] <7> [270.706178] [drm:drm_mode_setcrtc] [CONNECTOR:61:LVDS-1] <7> [270.722612] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [270.806066] [drm:drm_mode_setcrtc] [CRTC:45:pipe A] <7> [270.806178] [drm:drm_mode_setcrtc] [CONNECTOR:61:LVDS-1] <7> [270.823060] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [270.906073] [drm:drm_mode_setcrtc] [CRTC:45:pipe A] <7> [270.906194] [drm:drm_mode_setcrtc] [CONNECTOR:61:LVDS-1] <7> [270.922975] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [271.006317] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:108] from all active usage due to RMFB ioctl <7> [271.006448] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:primary A] because [FB:108] is removed <7> [271.055419] [drm:drm_mode_setcrtc] [CRTC:45:pipe A] <7> [271.055447] [drm:drm_mode_setcrtc] [CONNECTOR:61:LVDS-1] <7> [271.089849] [drm:drm_mode_setcrtc] [CRTC:60:pipe B] <7> [271.091535] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [271.091870] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [271.100971] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [271.172145] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [271.256163] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:104] <7> [271.259701] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [271.261287] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [271.338672] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [271.424141] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [271.425470] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [271.505777] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [271.590732] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [271.604506] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [271.688905] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [271.791652] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [271.791939] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [271.872234] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [271.971513] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [271.986938] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [272.072081] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [272.160386] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [272.171000] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [272.254757] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [272.343914] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [272.352970] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [272.437786] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [272.521208] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:104] from all active usage due to RMFB ioctl <7> [272.521346] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:primary A] because [FB:104] is removed <6> [272.540704] [IGT] kms_frontbuffer_tracking: finished subtest basic, SUCCESS <6> [272.542204] [IGT] kms_frontbuffer_tracking: exiting, ret=0 <7> [272.542557] [drm:status_store] [CONNECTOR:65:VGA-1] force updated from 2 to 0 or reprobing <7> [272.542572] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] <7> [272.542586] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:65:VGA-1] force=1 <7> [272.542829] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 <7> [272.543023] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug <7> [272.543443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [272.543729] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [272.544239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [272.544545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [272.544558] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [272.544845] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [272.546785] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [272.546797] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [272.547068] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] <7> [272.547360] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] status updated from connected to disconnected <7> [272.547386] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] disconnected <7> [272.547548] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7> [272.547558] [drm:drm_client_modeset_probe] <7> [272.547713] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:LVDS-1] <7> [272.547729] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:61:LVDS-1] ELD monitor <7> [272.547740] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:61:LVDS-1] ELD size 20, SAD count 0 <7> [272.547843] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:LVDS-1] probed modes : <7> [272.547852] [drm:drm_mode_debug_printmodeline] Modeline "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 <7> [272.547866] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] <7> [272.547876] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:65:VGA-1] force=1 <7> [272.548195] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 <7> [272.548520] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug <7> [272.549345] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [272.549643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [272.549934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [272.550394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [272.550708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [272.550721] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [272.550934] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [272.552536] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [272.552550] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [272.552755] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] <7> [272.552951] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] disconnected <7> [272.552963] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:HDMI-A-1] <7> [272.552971] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:68:HDMI-A-1] <7> [272.603630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [272.620537] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [272.620552] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [272.620776] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [272.636505] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [272.636514] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [272.636704] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:HDMI-A-1] disconnected <7> [272.636714] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-1] <7> [272.636722] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:76:DP-1] <7> [272.636919] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-1] disconnected <7> [272.636926] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:81:HDMI-A-2] <7> [272.636933] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:81:HDMI-A-2] <7> [272.637321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [272.637570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [272.637981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [272.638171] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [272.638179] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [272.638365] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [272.639905] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [272.639914] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [272.640109] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:81:HDMI-A-2] disconnected <7> [272.640117] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-3] <7> [272.640125] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:85:HDMI-A-3] <7> [272.640481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [272.640674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [272.641049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [272.641239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [272.641245] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [272.641431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [272.642980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [272.642989] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [272.643184] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-3] disconnected <7> [272.643193] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:89:DP-2] <7> [272.643200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:89:DP-2] <7> [272.643405] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:89:DP-2] disconnected <7> [272.643412] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:DP-3] <7> [272.643419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:93:DP-3] <7> [272.643660] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:DP-3] disconnected <7> [272.643671] [drm:drm_client_modeset_probe] connector 61 enabled? yes <7> [272.643681] [drm:drm_client_modeset_probe] connector 65 enabled? no <7> [272.643689] [drm:drm_client_modeset_probe] connector 68 enabled? no <7> [272.643696] [drm:drm_client_modeset_probe] connector 76 enabled? no <7> [272.643703] [drm:drm_client_modeset_probe] connector 81 enabled? no <7> [272.643711] [drm:drm_client_modeset_probe] connector 85 enabled? no <7> [272.643718] [drm:drm_client_modeset_probe] connector 89 enabled? no <7> [272.643725] [drm:drm_client_modeset_probe] connector 93 enabled? no <7> [272.643763] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [272.643781] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 61 <7> [272.643790] [drm:drm_client_modeset_probe] looking for preferred mode on connector 61 0 <7> [272.643797] [drm:drm_client_modeset_probe] found mode 1366x768 <7> [272.643805] [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config <7> [272.643833] [drm:drm_client_modeset_probe] desired mode 1366x768 set on crtc 45 (0,0) <7> [272.704470] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7> [272.704570] [drm:drm_client_modeset_probe] <7> [272.704726] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:LVDS-1] <7> [272.704772] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:61:LVDS-1] ELD monitor <7> [272.704794] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:61:LVDS-1] ELD size 20, SAD count 0 <7> [272.705004] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:LVDS-1] probed modes : <7> [272.705021] [drm:drm_mode_debug_printmodeline] Modeline "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 <7> [272.705045] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] <7> [272.705064] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:65:VGA-1] force=1 <7> [272.705876] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 <6> [272.706102] Console: switching to colour frame buffer device 170x48 <7> [272.706208] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug <7> [272.706665] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [272.706858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [272.707232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [272.707422] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [272.707429] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [272.707643] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [272.709196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [272.709203] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [272.709394] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] <7> [272.709634] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:VGA-1] disconnected <7> [272.709646] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:HDMI-A-1] <7> [272.709656] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:68:HDMI-A-1] <7> [272.761479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [272.777594] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [272.777606] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [272.777813] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [272.793581] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [272.793589] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [272.793779] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:HDMI-A-1] disconnected <7> [272.793788] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-1] <7> [272.793795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:76:DP-1] <7> [272.793991] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-1] disconnected <7> [272.793997] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:81:HDMI-A-2] <7> [272.794002] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:81:HDMI-A-2] <7> [272.794404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [272.794640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [272.795043] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [272.795236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [272.795241] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [272.795432] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [272.796984] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [272.796991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [272.797185] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:81:HDMI-A-2] disconnected <7> [272.797192] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-3] <7> [272.797198] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:85:HDMI-A-3] <7> [272.797614] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [272.797816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [272.798190] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [272.798378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [272.798383] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [272.798590] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [272.800156] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [272.800163] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [272.800359] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-3] disconnected <7> [272.800366] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:89:DP-2] <7> [272.800373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:89:DP-2] <7> [272.800637] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:89:DP-2] disconnected <7> [272.800647] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:DP-3] <7> [272.800653] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:93:DP-3] <7> [272.800857] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:DP-3] disconnected <7> [272.800862] [drm:drm_client_modeset_probe] connector 61 enabled? yes <7> [272.800867] [drm:drm_client_modeset_probe] connector 65 enabled? no <7> [272.800870] [drm:drm_client_modeset_probe] connector 68 enabled? no <7> [272.800873] [drm:drm_client_modeset_probe] connector 76 enabled? no <7> [272.800876] [drm:drm_client_modeset_probe] connector 81 enabled? no <7> [272.800879] [drm:drm_client_modeset_probe] connector 85 enabled? no <7> [272.800882] [drm:drm_client_modeset_probe] connector 89 enabled? no <7> [272.800885] [drm:drm_client_modeset_probe] connector 93 enabled? no <7> [272.800902] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [272.800912] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 61 <7> [272.800916] [drm:drm_client_modeset_probe] looking for preferred mode on connector 61 0 <7> [272.800919] [drm:drm_client_modeset_probe] found mode 1366x768 <7> [272.800922] [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config <7> [272.800941] [drm:drm_client_modeset_probe] desired mode 1366x768 set on crtc 45 (0,0)

Created at 2023-10-08 22:33:31