igt@kms_force_connector_basic@force-connector-state on fi-ilk-650@linus-v6.6-rc5 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-gd1db7333d (x86_64) (Linux: 6.6.0-rc5-linus-v6.6-rc5-g94f6f0550c62+ x86_64)
Out	Opened device: /dev/dri/card0 Starting subtest: force-connector-state Subtest force-connector-state: SUCCESS (0.113s)
Err	Starting subtest: force-connector-state Subtest force-connector-state: SUCCESS (0.113s)
Dmesg	<6> [128.637266] Console: switching to colour dummy device 80x25 <6> [128.637821] [IGT] kms_force_connector_basic: executing <7> [128.679661] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [128.680335] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [128.680669] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [128.681764] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing <7> [128.681815] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.681857] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [128.682118] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [128.682309] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [128.683003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.683199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [128.683595] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.683799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.683807] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.683996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [128.684898] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.684906] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [128.685267] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [128.685274] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.685282] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.685287] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.685293] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.685299] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.685352] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.685359] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [128.685664] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [128.685857] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [128.686243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.686474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [128.686860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.687047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.687053] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.687241] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [128.688165] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.688172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [128.688488] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [128.688495] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.688501] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.688506] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.688511] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.688516] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.688575] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.688581] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [128.688779] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [128.688967] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [128.689350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.689571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [128.689965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.690152] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.690158] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.690345] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [128.691249] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.691256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [128.691555] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [128.691562] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.691567] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.691573] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.691578] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.691583] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <6> [128.691849] [IGT] kms_force_connector_basic: starting subtest force-connector-state <7> [128.696142] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [128.696155] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [128.696605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [128.696792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [128.697157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [128.697370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [128.697380] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.697630] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [128.698600] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [128.698608] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [128.698798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [128.699328] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] <7> [128.699336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1] <7> [128.699564] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected <7> [128.699895] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.699904] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [128.700103] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [128.700291] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [128.700718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.700905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [128.701270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.701496] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.701504] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.701721] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [128.702616] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.702623] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [128.702883] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [128.702889] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.702896] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.702901] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.702906] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.702911] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.702935] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [128.702941] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [128.703324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [128.703533] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [128.703929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [128.704117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [128.704122] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.704305] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [128.705208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [128.705216] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [128.705427] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [128.705466] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] <7> [128.705476] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1] <7> [128.705691] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected <7> [128.742090] [drm:drm_mode_setcrtc] [CRTC:45:pipe A] <7> [128.742196] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [128.742441] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [128.742685] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [128.742882] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in has_pch_encoder (expected yes, found no) <7> [128.743078] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_lanes (expected 1, found 0) <7> [128.743274] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_m_n (expected tu 64 data 6039797/8388608 link 125829/524288, found tu 0, data 0/0 link 0/0) <7> [128.743505] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in output_types (expected 0x00000002, found 0x00000000) <7> [128.743751] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [128.743947] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1024, found 0) <7> [128.744143] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 1344, found 0) <7> [128.744339] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1024, found 0) <7> [128.744649] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 1344, found 0) <7> [128.744864] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1048, found 0) <7> [128.745061] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 1184, found 0) <7> [128.745256] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 768, found 0) <7> [128.745468] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 806, found 0) <7> [128.745705] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 768, found 0) <7> [128.745902] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 806, found 0) <7> [128.746097] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 771, found 0) <7> [128.746293] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 777, found 0) <7> [128.746505] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1024, found 0) <7> [128.746751] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 1344, found 0) <7> [128.746948] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1024, found 0) <7> [128.747188] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 1344, found 0) <7> [128.747401] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1048, found 0) <7> [128.747649] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 1184, found 0) <7> [128.747846] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 768, found 0) <7> [128.748042] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 806, found 0) <7> [128.748238] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 768, found 0) <7> [128.748450] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 806, found 0) <7> [128.748678] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 771, found 0) <7> [128.748874] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 777, found 0) <7> [128.749070] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [128.749305] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [128.749527] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [128.749748] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [128.749945] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 64800, found 0) <7> [128.750141] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 64800, found 0) <7> [128.750337] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in port_clock (expected 64800, found 0) <7> [128.750557] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [128.750774] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:45:pipe A] releasing PCH DPLL A <7> [128.750994] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [128.751191] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [128.751414] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:45:pipe A] enable: no [modeset] <7> [128.751627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:primary A] fb: [NOFB], visible: no <7> [128.751951] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [128.775637] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable PCH DPLL A (active 0x1, on? 1) for [CRTC:45:pipe A] <7> [128.775973] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling PCH DPLL A <7> [128.776487] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:62:CRT] <7> [128.776808] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:63:HDMI C] <7> [128.777108] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:71:DP C] <7> [128.777427] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:61:VGA-1] <7> [128.777752] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A <7> [128.778069] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL B <7> [128.778445] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:45:pipe A] <7> [128.781125] [drm:drm_mode_setcrtc] [CRTC:60:pipe B] <7> [128.783686] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 2 or reprobing <7> [128.783699] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.783973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.784285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [128.784811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.785111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.785134] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.785466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [128.786518] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.786544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [128.786956] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [128.786966] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.786978] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.786987] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.786996] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.787006] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.787082] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.787332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.787661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [128.788170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.788507] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.788528] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.788834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [128.789912] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.789932] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [128.790337] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [128.790345] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.790374] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.790383] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.790392] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.790400] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.790728] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 2 to 1 or reprobing <7> [128.790739] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.790749] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] status updated from connected to disconnected <7> [128.791342] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] disconnected <7> [128.791905] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.791916] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] disconnected <7> [128.792237] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 1 to 0 or reprobing <7> [128.792247] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.792259] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [128.792615] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [128.792924] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [128.793300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.794005] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] status updated from disconnected to connected <7> [128.794245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.795407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.795725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [128.796240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.796608] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.796621] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.796931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [128.797975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.797987] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [128.798292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.798743] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [128.798754] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.798766] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.798776] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.798786] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.798795] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.798890] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.798903] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [128.799536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.799874] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [128.800181] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [128.800580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.800933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.801469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.801774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [128.802284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.802623] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.802635] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.802942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [128.804047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.804057] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [128.804431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.804886] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [128.804896] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.804907] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.804915] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.804924] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.804932] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <6> [128.805464] [IGT] kms_force_connector_basic: finished subtest force-connector-state, SUCCESS <7> [128.805774] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [128.806608] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing <7> [128.806622] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.806636] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [128.806974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.807285] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [128.807618] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [128.807926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.808268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.808865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.809160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [128.809704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.810003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.810014] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.810328] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [128.811542] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.811554] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [128.811848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.812285] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [128.812295] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.812306] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.812316] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.812325] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.812335] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.812428] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.812440] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [128.812763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.813068] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [128.813384] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [128.813691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.814029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.814573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.814865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [128.815373] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.815677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.815685] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.815979] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [128.817012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.817022] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [128.817326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.817785] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [128.817794] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.817804] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.817812] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.817821] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.817833] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.818056] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:61:VGA-1] EDID override reset <7> [128.818121] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.818131] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [128.818461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.818775] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [128.819072] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [128.819385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.819730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.820250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.820573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [128.821040] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.821266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.821273] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.821499] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [128.822404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.822412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [128.822597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.822869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [128.822876] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.822882] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.822887] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.822893] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.822900] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.823268] [drm:status_store] [CONNECTOR:64:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [128.823280] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [128.823288] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [128.823553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.824290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [128.824514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [128.824898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [128.825087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [128.825094] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.825302] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [128.826386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [128.826395] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [128.826585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.826797] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [128.826847] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [128.826854] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [128.827050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.827640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [128.827827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [128.828193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [128.828417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [128.828425] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.828630] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [128.829523] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [128.829531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [128.829718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.829926] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [128.830069] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:64:HDMI-A-1] EDID override reset <7> [128.830096] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [128.830103] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [128.830298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.830754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [128.830941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [128.831307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [128.831529] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [128.831537] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.831740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [128.832642] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [128.832649] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [128.832855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.833063] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [128.833214] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:72:DP-1] EDID override reset <7> [128.833240] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] <7> [128.833247] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1] <7> [128.833490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.833717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.833944] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected <6> [128.834694] [IGT] kms_force_connector_basic: exiting, ret=0 <7> [128.835087] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing <7> [128.835097] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.835106] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [128.835319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.835546] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [128.835758] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [128.835947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.836168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.836605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.836793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [128.837162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.837380] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.837390] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.837600] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [128.838502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.838510] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [128.838695] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.838979] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [128.838986] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.838993] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.838999] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.839005] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.839010] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.839077] [drm:status_store] [CONNECTOR:64:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [128.839084] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [128.839091] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [128.839287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.839739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [128.839926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [128.840295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [128.840513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [128.840522] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.840728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [128.841627] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [128.841636] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [128.841827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.842038] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [128.842423] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [128.842995] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:61:VGA-1] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 0, max platform bpp 36) <7> [128.843207] i915 0000:00:02.0: [drm:ilk_fdi_compute_config [i915]] checking fdi config on pipe A, lanes 1 <7> [128.843428] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:45:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [128.843673] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [128.843871] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [128.844068] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [128.844265] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in has_pch_encoder (expected no, found yes) <7> [128.844525] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_lanes (expected 0, found 1) <7> [128.844766] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6039797/8388608 link 125829/524288) <7> [128.844966] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000002) <7> [128.845163] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [128.845384] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1024) <7> [128.845632] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 1344) <7> [128.845829] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1024) <7> [128.846026] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 1344) <7> [128.846222] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1048) <7> [128.846653] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 1184) <7> [128.846908] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 768) <7> [128.847105] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 806) <7> [128.847353] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 768) <7> [128.847599] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 806) <7> [128.847797] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 771) <7> [128.847993] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 777) <7> [128.848189] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1024) <7> [128.848409] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 1344) <7> [128.848667] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1024) <7> [128.848865] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 1344) <7> [128.849062] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1048) <7> [128.849258] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 1184) <7> [128.849478] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 768) <7> [128.849728] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 806) <7> [128.849925] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 768) <7> [128.850122] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 806) <7> [128.850318] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 771) <7> [128.850675] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 777) <7> [128.850891] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [128.851088] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [128.851285] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [128.851510] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [128.851763] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 64800) <7> [128.851961] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 64800) <7> [128.852158] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in port_clock (expected 0, found 64800) <7> [128.852387] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [128.852673] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:primary A] min cdclk (64800 kHz) > [CRTC:45:pipe A] min cdclk (0 kHz) <7> [128.852876] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [128.853072] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [128.853269] i915 0000:00:02.0: [drm:ibx_get_dpll [i915]] [CRTC:45:pipe A] using pre-allocated PCH DPLL A <7> [128.853487] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:45:pipe A] reserving PCH DPLL A <7> [128.853741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:45:pipe A] enable: yes [modeset] <7> [128.853939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: ANALOG (0x2), output format: RGB, sink format: RGB <7> [128.854136] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [128.854357] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [128.854614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [128.854811] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [128.855007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [128.855203] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] fdi: lanes: 1; data_m: 6039797, data_n: 8388608, link_m: 125829, link_n: 524288, tu: 64 <7> [128.855453] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [128.855701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [128.855898] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [128.856095] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.856293] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.856531] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64800, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa <7> [128.856782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1024x768": 60 64800 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.856980] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64800, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa <7> [128.857177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 64800, pipe src: 1024x768+0+0, pixel rate 64800 <7> [128.857397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 0, ips linetime: 0 <7> [128.857656] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [128.857853] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [128.858050] i915 0000:00:02.0: [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x84100010, dpll_md: 0x0, fp0: 0x10c09, fp1: 0x10c09 <7> [128.858244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x3 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [128.858463] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [128.858711] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [128.858908] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [128.859104] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [128.859300] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [128.859549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:primary A] fb: [FB:77] 1024x768 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [128.859791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [128.859988] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1024.000000x768.000000+0.000000+0.000000 dst: 1024x768+0+0 <7> [128.860185] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:sprite A] fb: [NOFB], visible: no <7> [128.860407] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:41:cursor A] fb: [NOFB], visible: no <7> [128.860791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.861037] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:62:CRT] <7> [128.861230] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:63:HDMI C] <7> [128.861443] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:71:DP C] <7> [128.861702] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A <7> [128.861912] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL B <7> [128.862545] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [128.863090] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI_RX_IIR 0x100 <7> [128.863356] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI train 1 done. <7> [128.863818] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI_RX_IIR 0x600 <7> [128.864120] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI train 2 done. <7> [128.864443] i915 0000:00:02.0: [drm:ilk_pch_enable [i915]] FDI train done <7> [128.864746] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable PCH DPLL A (active 0x1, on? 0) for [CRTC:45:pipe A] <7> [128.865034] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling PCH DPLL A <7> [128.916975] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:61:VGA-1] <7> [128.917217] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:45:pipe A] <7> [128.917580] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A <7> [128.918019] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7> [128.918040] [drm:drm_client_modeset_probe] <7> [128.918587] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [128.918634] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [128.918868] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [128.919058] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [128.919848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.920103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [128.920569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [128.920760] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.920768] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.920957] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [128.921861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [128.921869] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [128.922233] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [128.922246] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.922253] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.922259] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.922265] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.922270] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.922277] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [128.922284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [128.922715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [128.922903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [128.923272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [128.923486] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [128.923495] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [128.923700] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [128.924590] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [128.924598] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [128.924789] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [128.924797] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] <7> [128.924804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1] <7> [128.925007] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected <7> [128.925013] [drm:drm_client_modeset_probe] connector 61 enabled? yes <7> [128.925020] [drm:drm_client_modeset_probe] connector 64 enabled? no <7> [128.925023] [drm:drm_client_modeset_probe] connector 72 enabled? no <7> [128.925123] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [128.925144] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 61 <7> [128.925149] [drm:drm_client_modeset_probe] looking for preferred mode on connector 61 0 <7> [128.925153] [drm:drm_client_modeset_probe] found mode 1024x768 <7> [128.925157] [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config <7> [128.925195] [drm:drm_client_modeset_probe] desired mode 1024x768 set on crtc 45 (0,0) <6> [128.950575] Console: switching to colour frame buffer device 128x48

<6> [128.637266] Console: switching to colour dummy device 80x25

<6> [128.637821] [IGT] kms_force_connector_basic: executing

<7> [128.679661] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [128.680335] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<7> [128.680669] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [128.681764] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing

<7> [128.681815] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.681857] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [128.682118] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [128.682309] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [128.683003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.683199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [128.683595] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.683799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.683807] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.683996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [128.684898] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.684906] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [128.685267] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [128.685274] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.685282] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.685287] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.685293] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.685299] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.685352] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.685359] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [128.685664] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [128.685857] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [128.686243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.686474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [128.686860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.687047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.687053] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.687241] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [128.688165] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.688172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [128.688488] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [128.688495] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.688501] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.688506] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.688511] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.688516] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.688575] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.688581] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [128.688779] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [128.688967] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [128.689350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.689571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [128.689965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.690152] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.690158] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.690345] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [128.691249] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.691256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [128.691555] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [128.691562] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.691567] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.691573] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.691578] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.691583] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<6> [128.691849] [IGT] kms_force_connector_basic: starting subtest force-connector-state

<7> [128.696142] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1]

<7> [128.696155] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [128.696605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [128.696792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [128.697157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [128.697370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [128.697380] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.697630] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [128.698600] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [128.698608] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [128.698798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [128.699328] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1]

<7> [128.699336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]

<7> [128.699564] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected

<7> [128.699895] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.699904] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [128.700103] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [128.700291] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [128.700718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.700905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [128.701270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.701496] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.701504] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.701721] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [128.702616] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.702623] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [128.702883] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [128.702889] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.702896] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.702901] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.702906] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.702911] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.702935] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1]

<7> [128.702941] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [128.703324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [128.703533] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [128.703929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [128.704117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [128.704122] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.704305] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [128.705208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [128.705216] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [128.705427] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [128.705466] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1]

<7> [128.705476] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]

<7> [128.705691] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected

<7> [128.742090] [drm:drm_mode_setcrtc] [CRTC:45:pipe A]

<7> [128.742196] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [128.742441] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [128.742685] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [128.742882] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in has_pch_encoder (expected yes, found no)

<7> [128.743078] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_lanes (expected 1, found 0)

<7> [128.743274] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_m_n (expected tu 64 data 6039797/8388608 link 125829/524288, found tu 0, data 0/0 link 0/0)

<7> [128.743505] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in output_types (expected 0x00000002, found 0x00000000)

<7> [128.743751] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [128.743947] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1024, found 0)

<7> [128.744143] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 1344, found 0)

<7> [128.744339] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1024, found 0)

<7> [128.744649] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 1344, found 0)

<7> [128.744864] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1048, found 0)

<7> [128.745061] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 1184, found 0)

<7> [128.745256] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 768, found 0)

<7> [128.745468] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 806, found 0)

<7> [128.745705] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 768, found 0)

<7> [128.745902] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 806, found 0)

<7> [128.746097] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 771, found 0)

<7> [128.746293] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 777, found 0)

<7> [128.746505] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1024, found 0)

<7> [128.746751] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 1344, found 0)

<7> [128.746948] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1024, found 0)

<7> [128.747188] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 1344, found 0)

<7> [128.747401] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1048, found 0)

<7> [128.747649] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 1184, found 0)

<7> [128.747846] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 768, found 0)

<7> [128.748042] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 806, found 0)

<7> [128.748238] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 768, found 0)

<7> [128.748450] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 806, found 0)

<7> [128.748678] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 771, found 0)

<7> [128.748874] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 777, found 0)

<7> [128.749070] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [128.749305] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [128.749527] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [128.749748] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [128.749945] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 64800, found 0)

<7> [128.750141] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 64800, found 0)

<7> [128.750337] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in port_clock (expected 64800, found 0)

<7> [128.750557] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [128.750774] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:45:pipe A] releasing PCH DPLL A

<7> [128.750994] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [128.751191] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [128.751414] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:45:pipe A] enable: no [modeset]

<7> [128.751627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:primary A] fb: [NOFB], visible: no

<7> [128.751951] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [128.775637] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable PCH DPLL A (active 0x1, on? 1) for [CRTC:45:pipe A]

<7> [128.775973] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling PCH DPLL A

<7> [128.776487] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:62:CRT]

<7> [128.776808] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:63:HDMI C]

<7> [128.777108] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:71:DP C]

<7> [128.777427] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:61:VGA-1]

<7> [128.777752] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A

<7> [128.778069] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL B

<7> [128.778445] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:45:pipe A]

<7> [128.781125] [drm:drm_mode_setcrtc] [CRTC:60:pipe B]

<7> [128.783686] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 2 or reprobing

<7> [128.783699] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.783973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.784285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [128.784811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.785111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.785134] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.785466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [128.786518] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.786544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [128.786956] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [128.786966] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.786978] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.786987] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.786996] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.787006] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.787082] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.787332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.787661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [128.788170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.788507] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.788528] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.788834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [128.789912] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.789932] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [128.790337] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [128.790345] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.790374] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.790383] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.790392] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.790400] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.790728] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 2 to 1 or reprobing

<7> [128.790739] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.790749] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] status updated from connected to disconnected

<7> [128.791342] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] disconnected

<7> [128.791905] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.791916] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] disconnected

<7> [128.792237] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 1 to 0 or reprobing

<7> [128.792247] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.792259] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [128.792615] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [128.792924] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [128.793300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.794005] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] status updated from disconnected to connected

<7> [128.794245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.795407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.795725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [128.796240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.796608] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.796621] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.796931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [128.797975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.797987] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [128.798292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.798743] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [128.798754] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.798766] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.798776] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.798786] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.798795] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.798890] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.798903] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [128.799536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.799874] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [128.800181] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [128.800580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.800933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.801469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.801774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [128.802284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.802623] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.802635] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.802942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [128.804047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.804057] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [128.804431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.804886] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [128.804896] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.804907] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.804915] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.804924] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.804932] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<6> [128.805464] [IGT] kms_force_connector_basic: finished subtest force-connector-state, SUCCESS

<7> [128.805774] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [128.806608] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing

<7> [128.806622] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.806636] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [128.806974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.807285] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [128.807618] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [128.807926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.808268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.808865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.809160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [128.809704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.810003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.810014] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.810328] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [128.811542] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.811554] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [128.811848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.812285] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [128.812295] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.812306] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.812316] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.812325] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.812335] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.812428] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.812440] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [128.812763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.813068] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [128.813384] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [128.813691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.814029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.814573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.814865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [128.815373] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.815677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.815685] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.815979] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [128.817012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.817022] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [128.817326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.817785] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [128.817794] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.817804] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.817812] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.817821] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.817833] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.818056] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:61:VGA-1] EDID override reset

<7> [128.818121] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.818131] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [128.818461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.818775] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [128.819072] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [128.819385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.819730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.820250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.820573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [128.821040] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.821266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.821273] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.821499] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [128.822404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.822412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [128.822597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.822869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [128.822876] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.822882] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.822887] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.822893] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.822900] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.823268] [drm:status_store] [CONNECTOR:64:HDMI-A-1] force updated from 0 to 0 or reprobing

<7> [128.823280] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1]

<7> [128.823288] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [128.823553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.824290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [128.824514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [128.824898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [128.825087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [128.825094] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.825302] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [128.826386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [128.826395] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [128.826585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.826797] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [128.826847] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1]

<7> [128.826854] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [128.827050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.827640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [128.827827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [128.828193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [128.828417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [128.828425] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.828630] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [128.829523] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [128.829531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [128.829718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.829926] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [128.830069] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:64:HDMI-A-1] EDID override reset

<7> [128.830096] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1]

<7> [128.830103] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [128.830298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.830754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [128.830941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [128.831307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [128.831529] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [128.831537] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.831740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [128.832642] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [128.832649] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [128.832855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.833063] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [128.833214] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:72:DP-1] EDID override reset

<7> [128.833240] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1]

<7> [128.833247] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]

<7> [128.833490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.833717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.833944] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected

<6> [128.834694] [IGT] kms_force_connector_basic: exiting, ret=0

<7> [128.835087] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing

<7> [128.835097] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.835106] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [128.835319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.835546] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [128.835758] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [128.835947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.836168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.836605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.836793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [128.837162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.837380] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.837390] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.837600] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [128.838502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.838510] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [128.838695] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.838979] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [128.838986] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.838993] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.838999] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.839005] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.839010] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.839077] [drm:status_store] [CONNECTOR:64:HDMI-A-1] force updated from 0 to 0 or reprobing

<7> [128.839084] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1]

<7> [128.839091] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [128.839287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.839739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [128.839926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [128.840295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [128.840513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [128.840522] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.840728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [128.841627] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [128.841636] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [128.841827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.842038] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [128.842423] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<7> [128.842995] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:61:VGA-1] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 0, max platform bpp 36)

<7> [128.843207] i915 0000:00:02.0: [drm:ilk_fdi_compute_config [i915]] checking fdi config on pipe A, lanes 1

<7> [128.843428] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:45:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [128.843673] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [128.843871] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [128.844068] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [128.844265] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in has_pch_encoder (expected no, found yes)

<7> [128.844525] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_lanes (expected 0, found 1)

<7> [128.844766] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6039797/8388608 link 125829/524288)

<7> [128.844966] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000002)

<7> [128.845163] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [128.845384] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1024)

<7> [128.845632] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 1344)

<7> [128.845829] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1024)

<7> [128.846026] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 1344)

<7> [128.846222] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1048)

<7> [128.846653] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 1184)

<7> [128.846908] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 768)

<7> [128.847105] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 806)

<7> [128.847353] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 768)

<7> [128.847599] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 806)

<7> [128.847797] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 771)

<7> [128.847993] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 777)

<7> [128.848189] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1024)

<7> [128.848409] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 1344)

<7> [128.848667] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1024)

<7> [128.848865] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 1344)

<7> [128.849062] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1048)

<7> [128.849258] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 1184)

<7> [128.849478] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 768)

<7> [128.849728] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 806)

<7> [128.849925] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 768)

<7> [128.850122] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 806)

<7> [128.850318] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 771)

<7> [128.850675] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 777)

<7> [128.850891] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [128.851088] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [128.851285] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [128.851510] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [128.851763] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 64800)

<7> [128.851961] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 64800)

<7> [128.852158] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in port_clock (expected 0, found 64800)

<7> [128.852387] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [128.852673] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:primary A] min cdclk (64800 kHz) > [CRTC:45:pipe A] min cdclk (0 kHz)

<7> [128.852876] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [128.853072] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [128.853269] i915 0000:00:02.0: [drm:ibx_get_dpll [i915]] [CRTC:45:pipe A] using pre-allocated PCH DPLL A

<7> [128.853487] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:45:pipe A] reserving PCH DPLL A

<7> [128.853741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:45:pipe A] enable: yes [modeset]

<7> [128.853939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: ANALOG (0x2), output format: RGB, sink format: RGB

<7> [128.854136] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [128.854357] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [128.854614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [128.854811] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [128.855007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [128.855203] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] fdi: lanes: 1; data_m: 6039797, data_n: 8388608, link_m: 125829, link_n: 524288, tu: 64

<7> [128.855453] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [128.855701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [128.855898] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [128.856095] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.856293] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.856531] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64800, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa

<7> [128.856782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1024x768": 60 64800 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.856980] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64800, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa

<7> [128.857177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 64800, pipe src: 1024x768+0+0, pixel rate 64800

<7> [128.857397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 0, ips linetime: 0

<7> [128.857656] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [128.857853] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [128.858050] i915 0000:00:02.0: [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x84100010, dpll_md: 0x0, fp0: 0x10c09, fp1: 0x10c09

<7> [128.858244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x3 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [128.858463] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [128.858711] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [128.858908] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [128.859104] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [128.859300] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [128.859549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:primary A] fb: [FB:77] 1024x768 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [128.859791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [128.859988] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1024.000000x768.000000+0.000000+0.000000 dst: 1024x768+0+0

<7> [128.860185] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:sprite A] fb: [NOFB], visible: no

<7> [128.860407] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:41:cursor A] fb: [NOFB], visible: no

<7> [128.860791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.861037] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:62:CRT]

<7> [128.861230] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:63:HDMI C]

<7> [128.861443] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:71:DP C]

<7> [128.861702] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A

<7> [128.861912] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL B

<7> [128.862545] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [128.863090] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI_RX_IIR 0x100

<7> [128.863356] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI train 1 done.

<7> [128.863818] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI_RX_IIR 0x600

<7> [128.864120] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI train 2 done.

<7> [128.864443] i915 0000:00:02.0: [drm:ilk_pch_enable [i915]] FDI train done

<7> [128.864746] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable PCH DPLL A (active 0x1, on? 0) for [CRTC:45:pipe A]

<7> [128.865034] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling PCH DPLL A

<7> [128.916975] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:61:VGA-1]

<7> [128.917217] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:45:pipe A]

<7> [128.917580] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A

<7> [128.918019] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]

<7> [128.918040] [drm:drm_client_modeset_probe]

<7> [128.918587] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [128.918634] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [128.918868] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [128.919058] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [128.919848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.920103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [128.920569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [128.920760] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.920768] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.920957] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [128.921861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [128.921869] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [128.922233] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [128.922246] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.922253] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.922259] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.922265] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.922270] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.922277] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1]

<7> [128.922284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [128.922715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [128.922903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [128.923272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [128.923486] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [128.923495] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [128.923700] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [128.924590] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [128.924598] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [128.924789] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [128.924797] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1]

<7> [128.924804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]

<7> [128.925007] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected

<7> [128.925013] [drm:drm_client_modeset_probe] connector 61 enabled? yes

<7> [128.925020] [drm:drm_client_modeset_probe] connector 64 enabled? no

<7> [128.925023] [drm:drm_client_modeset_probe] connector 72 enabled? no

<7> [128.925123] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [128.925144] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 61

<7> [128.925149] [drm:drm_client_modeset_probe] looking for preferred mode on connector 61 0

<7> [128.925153] [drm:drm_client_modeset_probe] found mode 1024x768

<7> [128.925157] [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config

<7> [128.925195] [drm:drm_client_modeset_probe] desired mode 1024x768 set on crtc 45 (0,0)

<6> [128.950575] Console: switching to colour frame buffer device 128x48

Results for igt@kms_force_connector_basic@force-connector-state