igt@i915_selftest@live@workarounds on fi-cfl-8109u@linus-v6.6-rc5 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-gd1db7333d (x86_64) (Linux: 6.6.0-rc5-linus-v6.6-rc5-g94f6f0550c62+ x86_64)
Out	Starting dynamic subtest: workarounds Dynamic subtest workarounds: SUCCESS (0.886s)
Err	Starting dynamic subtest: workarounds Dynamic subtest workarounds: SUCCESS (0.886s)
Dmesg	<6> [249.949991] [IGT] i915_selftest: starting dynamic subtest workarounds <5> [250.087737] Setting dangerous option live_selftests - tainting kernel <7> [250.143093] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [250.143446] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [250.143676] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Cannon Lake LP PCH (CNP-LP) <7> [250.143877] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [250.144190] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [250.144432] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <6> [250.145262] i915 0000:00:02.0: [drm] Found 128MB of eDRAM <7> [250.145475] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [250.145749] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [250.145982] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [250.146195] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [250.146203] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [250.146782] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [250.146816] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 3ff00047 <7> [250.147140] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [250.147939] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x3a332018 <7> [250.148324] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [250.148647] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [250.148964] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [250.149280] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [250.154709] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [250.154936] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [250.155131] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [250.155338] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [250.155573] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [250.155725] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no <7> [250.155868] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [250.156008] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [250.156149] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no <7> [250.156286] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [250.156474] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [250.156647] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [250.156786] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [250.156923] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [250.157431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [250.157693] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 228 <7> [250.157908] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [250.158119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 317, min size 5) <7> [250.158357] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [250.158567] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [250.158778] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812) <7> [250.158986] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 30, min size 34) <7> [250.159194] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [250.159421] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [250.159631] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [250.159839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 54, min size 78) <7> [250.160042] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [250.160244] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [250.160510] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [250.160831] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [250.161150] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [250.161473] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:1 USB-Type-C:0 TBT:0 DSC:0 <7> [250.161794] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [250.162114] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT DP max link rate: 810000 <7> [250.162364] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0 <7> [250.162620] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [250.162826] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT DP max link rate: 810000 <7> [250.163032] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [250.163251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [250.163558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [250.163792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [250.164005] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [250.164218] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [250.164440] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [250.164663] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [250.164948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [250.165153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [250.165391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [250.165629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [250.165896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [250.166105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [250.166330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [250.166593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [250.166851] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [250.167483] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [250.168165] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [250.168467] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [250.168671] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [250.168896] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [250.169088] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [250.169280] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [250.169552] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [250.169833] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [250.170125] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [250.170434] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <6> [250.170701] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [250.175676] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [250.177542] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [250.177964] i915 0000:00:02.0: [drm:intel_ddi_init [i915]] VBT says port B has lspcon <7> [250.178338] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT) <7> [250.178668] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [250.179532] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [250.179876] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI C/PHY C] Using AUX CH C (VBT) <7> [250.180202] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI C/PHY C] <7> [250.181077] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [250.181409] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI C/PHY C] <7> [250.181672] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI C/PHY C] Using DDC pin 0x2 (VBT) <7> [250.182677] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [250.182936] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [250.183211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [250.183514] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [250.183789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [250.183996] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [250.184200] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [250.184419] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [250.184670] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [250.184875] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [250.185079] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [250.185281] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [250.185526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [250.185762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [250.185958] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [250.186153] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [250.186407] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI C/PHY C] hw state readout: disabled, pipe A <7> [250.186704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A <7> [250.186901] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B <7> [250.187096] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C <7> [250.187318] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [250.187636] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [250.187960] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [250.188282] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [250.188685] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [250.189036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-2] hw state readout: disabled <7> [250.189376] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:HDMI-A-1] hw state readout: disabled <7> [250.189668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [250.189933] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [250.190155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [250.190372] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [250.190618] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [250.190820] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [250.191016] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [250.191211] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [250.191439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [250.191681] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [250.191877] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [250.192072] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [250.192354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [250.192592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [250.192798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [250.193001] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [250.193206] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [250.193443] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [250.193691] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [250.193926] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [250.194089] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [250.194321] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [250.194540] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7> [250.195911] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [250.196126] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [250.196345] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [250.212762] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [250.212973] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [250.213135] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [250.213313] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'1 to vcs1 <7> [250.213561] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [250.214200] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [250.214685] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [250.214913] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [250.215106] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [250.215317] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [250.215565] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [250.221215] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [250.224281] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2 <7> [250.225370] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.226800] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.228363] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.229714] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.232348] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.233209] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [250.233996] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.235633] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.237240] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.238808] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.240578] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.241967] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.242866] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a8 (err 0) <7> [250.242891] i915 0000:00:02.0: [drm:lspcon_init [i915]] LSPCON detected <7> [250.243956] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.245522] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.247486] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.249218] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.250965] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.252754] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.254658] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.256587] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.258217] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [250.259095] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON <7> [250.259982] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04 <7> [250.260655] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.75 quirks 0x0000 <7> [250.260674] i915 0000:00:02.0: [drm:lspcon_init [i915]] Vendor: Mega Chips <7> [250.260883] i915 0000:00:02.0: [drm:lspcon_init [i915]] Success: LSPCON init <7> [250.261538] i915 0000:00:02.0: [drm:lspcon_detect_hdr_capability [i915]] LSPCON capable of HDR <7> [250.261778] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [250.262508] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [250.263526] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-2] generating connector hotplug event <7> [250.264047] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:HDMI-A-1] generating connector hotplug event <6> [250.264117] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [250.267072] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [250.293353] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [250.297766] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35 <7> [250.298792] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [250.299861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [250.300316] [drm:drm_client_modeset_probe] <7> [250.300380] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [250.300234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [250.300393] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [250.300705] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [250.300726] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [250.300736] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] <7> [250.300746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2] <7> [250.301046] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] status updated from unknown to disconnected <7> [250.301063] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected <7> [250.301071] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [250.301058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [250.301080] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [250.301411] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from unknown to disconnected <7> [250.301427] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <7> [250.301435] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [250.301442] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [250.301448] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [250.301454] [drm:drm_client_modeset_probe] connector 114 enabled? no <7> [250.301503] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [250.301518] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [250.301386] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [250.301547] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [250.301559] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [250.302408] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [250.302726] [drm:drm_client_modeset_probe] <7> [250.302779] i915 device info: pciid=0x3ea5 rev=0x01 platform=COFFEELAKE (subplatform=0x1) gen=9 <7> [250.302781] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [250.302788] i915 device info: graphics version: 9 <7> [250.302793] i915 device info: media version: 9 <7> [250.302796] i915 device info: graphics stepping: <7> [250.302800] i915 device info: media stepping: <7> [250.302804] i915 device info: display stepping: <7> [250.302807] i915 device info: base die stepping: <7> [250.302811] i915 device info: gt: 3 <7> [250.302815] i915 device info: memory-regions: 0x21 <7> [250.302818] i915 device info: page-sizes: 0x11000 <7> [250.302822] i915 device info: platform: COFFEELAKE <7> [250.302826] i915 device info: ppgtt-size: 48 <7> [250.302829] i915 device info: ppgtt-type: 2 <7> [250.302833] i915 device info: dma_mask_size: 39 <7> [250.302837] i915 device info: is_mobile: no <7> [250.302841] i915 device info: is_lp: no <7> [250.302844] i915 device info: require_force_probe: no <7> [250.302848] i915 device info: is_dgfx: no <7> [250.302852] i915 device info: has_64bit_reloc: yes <7> [250.302855] i915 device info: has_64k_pages: no <7> [250.302859] i915 device info: gpu_reset_clobbers_display: no <7> [250.302863] i915 device info: has_reset_engine: yes <7> [250.302867] i915 device info: has_3d_pipeline: yes <7> [250.302871] i915 device info: has_4tile: no <7> [250.302874] i915 device info: has_flat_ccs: no <7> [250.302878] i915 device info: has_global_mocs: no <7> [250.302882] i915 device info: has_gmd_id: no <7> [250.302885] i915 device info: has_gt_uc: yes <7> [250.302889] i915 device info: has_heci_pxp: no <7> [250.302893] i915 device info: has_heci_gscfi: no <7> [250.302896] i915 device info: has_guc_deprivilege: no <7> [250.302900] i915 device info: has_l3_ccs_read: no <7> [250.302904] i915 device info: has_l3_dpf: no <7> [250.302908] i915 device info: has_llc: yes <7> [250.302911] i915 device info: has_logical_ring_contexts: yes <7> [250.302915] i915 device info: has_logical_ring_elsq: no <7> [250.302919] i915 device info: has_media_ratio_mode: no <7> [250.302922] i915 device info: has_mslice_steering: no <7> [250.302926] i915 device info: has_oa_bpc_reporting: no <7> [250.302929] i915 device info: has_oa_slice_contrib_limits: no <7> [250.302933] i915 device info: has_oam: no <7> [250.302937] i915 device info: has_one_eu_per_fuse_bit: no <7> [250.302940] i915 device info: has_pxp: no <7> [250.302944] i915 device info: has_rc6: yes <7> [250.302791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [250.302948] i915 device info: has_rc6p: no <7> [250.302951] i915 device info: has_rps: yes <7> [250.302954] i915 device info: has_runtime_pm: yes <7> [250.302957] i915 device info: has_snoop: no <7> [250.302960] i915 device info: has_coherent_ggtt: yes <7> [250.302963] i915 device info: tuning_thread_rr_after_dep: no <7> [250.302966] i915 device info: unfenced_needs_alignment: no <7> [250.302970] i915 device info: hws_needs_physical: no <7> [250.302972] i915 device info: has_pooled_eu: no <7> [250.302975] i915 device info: rawclk rate: 24000 kHz <7> [250.302979] i915 device info: display version: 9 <7> [250.302982] i915 device info: cursor_needs_physical: no <7> [250.302985] i915 device info: has_cdclk_crawl: no <7> [250.302988] i915 device info: has_cdclk_squash: no <7> [250.302991] i915 device info: has_ddi: yes <7> [250.302994] i915 device info: has_dp_mst: yes <7> [250.302997] i915 device info: has_dsb: no <7> [250.303000] i915 device info: has_fpga_dbg: yes <7> [250.303004] i915 device info: has_gmch: no <7> [250.303007] i915 device info: has_hotplug: yes <7> [250.303010] i915 device info: has_hti: no <7> [250.303013] i915 device info: has_ipc: yes <7> [250.303016] i915 device info: has_overlay: no <7> [250.303019] i915 device info: has_psr: yes <7> [250.303022] i915 device info: has_psr_hw_tracking: yes <7> [250.303025] i915 device info: overlay_needs_physical: no <7> [250.303028] i915 device info: supports_tv: no <7> [250.303031] i915 device info: has_hdcp: yes <7> [250.303034] i915 device info: has_dmc: yes <7> [250.303037] i915 device info: has_dsc: no <7> [250.303040] i915 device info: iommu: enabled <7> [250.303044] i915 device info: available engines: 40c03 <7> [250.303047] i915 device info: slice total: 2, mask=0003 <7> [250.303051] i915 device info: subslice total: 6 <7> [250.303054] i915 device info: slice0: 3 subslices, mask=00000007 <7> [250.303058] i915 device info: slice1: 3 subslices, mask=00000007 <7> [250.303061] i915 device info: slice2: 0 subslices, mask=00000000 <7> [250.303064] i915 device info: EU total: 47 <7> [250.303067] i915 device info: EU per subslice: 8 <7> [250.303070] i915 device info: has slice power gating: yes <7> [250.303074] i915 device info: has subslice power gating: no <7> [250.303077] i915 device info: has EU power gating: yes <6> [250.303080] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [250.303083] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [250.303087] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [250.303094] i915: Performing live selftests with st_random_seed=0x5e92b8d0 st_timeout=500 <7> [250.303100] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [250.303108] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] <6> [250.303125] i915: Running workarounds <6> [250.303156] i915: Running intel_workarounds_live_selftests/live_dirty_whitelist <7> [250.303115] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2] <7> [250.303431] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected <7> [250.303440] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] <7> [250.303450] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1] <7> [250.303755] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected <7> [250.303763] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [250.303770] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [250.303777] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [250.303783] [drm:drm_client_modeset_probe] connector 114 enabled? no <7> [250.303834] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [250.303850] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [250.303878] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [250.303891] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [250.331892] i915: Running intel_workarounds_live_selftests/live_reset_whitelist <6> [250.331901] Checking 5 whitelisted registers on rcs0 (RING_NONPRIV) [engine] <5> [250.336893] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds <6> [250.338919] Checking 5 whitelisted registers on rcs0 (RING_NONPRIV) [device] <5> [250.341885] i915 0000:00:02.0: [drm] Resetting chip for live_workarounds <6> [250.364466] i915: Running intel_workarounds_live_selftests/live_isolated_whitelist <6> [250.383469] i915: Running intel_workarounds_live_selftests/live_gpu_reset_workarounds <6> [250.383485] Verifying after GPU reset... <7> [250.383494] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [250.383759] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT_REF workarounds on global <7> [250.383962] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 REF workarounds on rcs0 <7> [250.384159] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 CTX_REF workarounds on rcs0 <5> [250.387055] i915 0000:00:02.0: [drm] Resetting chip for live_workarounds <7> [250.392355] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <6> [250.407471] i915: Running intel_workarounds_live_selftests/live_engine_reset_workarounds <7> [250.407493] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [250.407751] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT_REF workarounds on global <7> [250.407970] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 REF workarounds on rcs0 <7> [250.408187] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 CTX_REF workarounds on rcs0 <6> [250.408409] Verifying after rcs0 reset... <5> [250.410586] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds:idle <5> [250.414316] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds:active <6> [250.416103] Verifying after bcs0 reset... <5> [250.420058] i915 0000:00:02.0: [drm] Resetting bcs0 for live_workarounds:active <6> [250.422264] Verifying after vcs0 reset... <5> [250.426840] i915 0000:00:02.0: [drm] Resetting vcs0 for live_workarounds:active <6> [250.428665] Verifying after vcs1 reset... <5> [250.433382] i915 0000:00:02.0: [drm] Resetting vcs1 for live_workarounds:active <6> [250.435035] Verifying after vecs0 reset... <5> [250.439808] i915 0000:00:02.0: [drm] Resetting vecs0 for live_workarounds:active <7> [250.454566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [250.454986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [250.455248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [250.455538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [250.455859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [250.479831] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [250.544824] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [250.590132] i915: probe of 0000:00:02.0 failed with error -25 <6> [250.837006] [IGT] i915_selftest: finished subtest workarounds, SUCCESS

<6> [249.949991] [IGT] i915_selftest: starting dynamic subtest workarounds

<5> [250.087737] Setting dangerous option live_selftests - tainting kernel

<7> [250.143093] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [250.143446] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [250.143676] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Cannon Lake LP PCH (CNP-LP)

<7> [250.143877] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [250.144190] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [250.144432] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<6> [250.145262] i915 0000:00:02.0: [drm] Found 128MB of eDRAM

<7> [250.145475] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [250.145749] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [250.145982] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [250.146195] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [250.146203] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [250.146782] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [250.146816] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 3ff00047

<7> [250.147140] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [250.147939] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x3a332018

<7> [250.148324] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [250.148647] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [250.148964] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [250.149280] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [250.154709] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [250.154936] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [250.155131] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [250.155338] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [250.155573] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [250.155725] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no

<7> [250.155868] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [250.156008] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [250.156149] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no

<7> [250.156286] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [250.156474] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [250.156647] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [250.156786] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [250.156923] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [250.157431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [250.157693] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 228

<7> [250.157908] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [250.158119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 317, min size 5)

<7> [250.158357] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [250.158567] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [250.158778] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812)

<7> [250.158986] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 30, min size 34)

<7> [250.159194] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [250.159421] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [250.159631] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [250.159839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 54, min size 78)

<7> [250.160042] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [250.160244] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [250.160510] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [250.160831] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [250.161150] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [250.161473] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:1 USB-Type-C:0 TBT:0 DSC:0

<7> [250.161794] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [250.162114] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT DP max link rate: 810000

<7> [250.162364] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0

<7> [250.162620] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [250.162826] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT DP max link rate: 810000

<7> [250.163032] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [250.163251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [250.163558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [250.163792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [250.164005] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [250.164218] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [250.164440] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [250.164663] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [250.164948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [250.165153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [250.165391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [250.165629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [250.165896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [250.166105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [250.166330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [250.166593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [250.166851] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [250.167483] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [250.168165] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [250.168467] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [250.168671] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [250.168896] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [250.169088] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [250.169280] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [250.169552] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [250.169833] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [250.170125] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [250.170434] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<6> [250.170701] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [250.175676] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [250.177542] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [250.177964] i915 0000:00:02.0: [drm:intel_ddi_init [i915]] VBT says port B has lspcon

<7> [250.178338] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT)

<7> [250.178668] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [250.179532] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [250.179876] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI C/PHY C] Using AUX CH C (VBT)

<7> [250.180202] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI C/PHY C]

<7> [250.181077] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [250.181409] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI C/PHY C]

<7> [250.181672] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI C/PHY C] Using DDC pin 0x2 (VBT)

<7> [250.182677] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [250.182936] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [250.183211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [250.183514] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [250.183789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [250.183996] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [250.184200] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [250.184419] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [250.184670] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [250.184875] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [250.185079] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [250.185281] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [250.185526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [250.185762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [250.185958] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [250.186153] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [250.186407] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [250.186704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A

<7> [250.186901] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B

<7> [250.187096] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C

<7> [250.187318] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [250.187636] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [250.187960] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [250.188282] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [250.188685] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [250.189036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-2] hw state readout: disabled

<7> [250.189376] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:HDMI-A-1] hw state readout: disabled

<7> [250.189668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [250.189933] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [250.190155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [250.190372] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [250.190618] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [250.190820] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [250.191016] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [250.191211] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [250.191439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [250.191681] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [250.191877] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [250.192072] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [250.192354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [250.192592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [250.192798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [250.193001] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [250.193206] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [250.193443] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [250.193691] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [250.193926] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [250.194089] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [250.194321] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [250.194540] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global

<7> [250.195911] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [250.196126] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [250.196345] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [250.212762] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [250.212973] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [250.213135] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [250.213313] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'1 to vcs1

<7> [250.213561] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [250.214200] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [250.214685] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [250.214913] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [250.215106] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [250.215317] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [250.215565] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [250.221215] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [250.224281] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2

<7> [250.225370] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.226800] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.228363] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.229714] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.232348] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.233209] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [250.233996] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.235633] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.237240] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.238808] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.240578] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.241967] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.242866] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a8 (err 0)

<7> [250.242891] i915 0000:00:02.0: [drm:lspcon_init [i915]] LSPCON detected

<7> [250.243956] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.245522] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.247486] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.249218] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.250965] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.252754] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.254658] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.256587] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.258217] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [250.259095] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON

<7> [250.259982] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04

<7> [250.260655] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.75 quirks 0x0000

<7> [250.260674] i915 0000:00:02.0: [drm:lspcon_init [i915]] Vendor: Mega Chips

<7> [250.260883] i915 0000:00:02.0: [drm:lspcon_init [i915]] Success: LSPCON init

<7> [250.261538] i915 0000:00:02.0: [drm:lspcon_detect_hdr_capability [i915]] LSPCON capable of HDR

<7> [250.261778] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [250.262508] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [250.263526] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-2] generating connector hotplug event

<7> [250.264047] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:HDMI-A-1] generating connector hotplug event

<6> [250.264117] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [250.267072] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [250.293353] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [250.297766] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35

<7> [250.298792] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [250.299861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [250.300316] [drm:drm_client_modeset_probe]

<7> [250.300380] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [250.300234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [250.300393] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [250.300705] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [250.300726] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [250.300736] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]

<7> [250.300746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]

<7> [250.301046] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] status updated from unknown to disconnected

<7> [250.301063] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected

<7> [250.301071] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [250.301058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [250.301080] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [250.301411] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from unknown to disconnected

<7> [250.301427] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<7> [250.301435] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [250.301442] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [250.301448] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [250.301454] [drm:drm_client_modeset_probe] connector 114 enabled? no

<7> [250.301503] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [250.301518] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [250.301386] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [250.301547] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [250.301559] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [250.302408] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [250.302726] [drm:drm_client_modeset_probe]

<7> [250.302779] i915 device info: pciid=0x3ea5 rev=0x01 platform=COFFEELAKE (subplatform=0x1) gen=9

<7> [250.302781] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [250.302788] i915 device info: graphics version: 9

<7> [250.302793] i915 device info: media version: 9

<7> [250.302796] i915 device info: graphics stepping: **

<7> [250.302800] i915 device info: media stepping: **

<7> [250.302804] i915 device info: display stepping: **

<7> [250.302807] i915 device info: base die stepping: **

<7> [250.302811] i915 device info: gt: 3

<7> [250.302815] i915 device info: memory-regions: 0x21

<7> [250.302818] i915 device info: page-sizes: 0x11000

<7> [250.302822] i915 device info: platform: COFFEELAKE

<7> [250.302826] i915 device info: ppgtt-size: 48

<7> [250.302829] i915 device info: ppgtt-type: 2

<7> [250.302833] i915 device info: dma_mask_size: 39

<7> [250.302837] i915 device info: is_mobile: no

<7> [250.302841] i915 device info: is_lp: no

<7> [250.302844] i915 device info: require_force_probe: no

<7> [250.302848] i915 device info: is_dgfx: no

<7> [250.302852] i915 device info: has_64bit_reloc: yes

<7> [250.302855] i915 device info: has_64k_pages: no

<7> [250.302859] i915 device info: gpu_reset_clobbers_display: no

<7> [250.302863] i915 device info: has_reset_engine: yes

<7> [250.302867] i915 device info: has_3d_pipeline: yes

<7> [250.302871] i915 device info: has_4tile: no

<7> [250.302874] i915 device info: has_flat_ccs: no

<7> [250.302878] i915 device info: has_global_mocs: no

<7> [250.302882] i915 device info: has_gmd_id: no

<7> [250.302885] i915 device info: has_gt_uc: yes

<7> [250.302889] i915 device info: has_heci_pxp: no

<7> [250.302893] i915 device info: has_heci_gscfi: no

<7> [250.302896] i915 device info: has_guc_deprivilege: no

<7> [250.302900] i915 device info: has_l3_ccs_read: no

<7> [250.302904] i915 device info: has_l3_dpf: no

<7> [250.302908] i915 device info: has_llc: yes

<7> [250.302911] i915 device info: has_logical_ring_contexts: yes

<7> [250.302915] i915 device info: has_logical_ring_elsq: no

<7> [250.302919] i915 device info: has_media_ratio_mode: no

<7> [250.302922] i915 device info: has_mslice_steering: no

<7> [250.302926] i915 device info: has_oa_bpc_reporting: no

<7> [250.302929] i915 device info: has_oa_slice_contrib_limits: no

<7> [250.302933] i915 device info: has_oam: no

<7> [250.302937] i915 device info: has_one_eu_per_fuse_bit: no

<7> [250.302940] i915 device info: has_pxp: no

<7> [250.302944] i915 device info: has_rc6: yes

<7> [250.302791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [250.302948] i915 device info: has_rc6p: no

<7> [250.302951] i915 device info: has_rps: yes

<7> [250.302954] i915 device info: has_runtime_pm: yes

<7> [250.302957] i915 device info: has_snoop: no

<7> [250.302960] i915 device info: has_coherent_ggtt: yes

<7> [250.302963] i915 device info: tuning_thread_rr_after_dep: no

<7> [250.302966] i915 device info: unfenced_needs_alignment: no

<7> [250.302970] i915 device info: hws_needs_physical: no

<7> [250.302972] i915 device info: has_pooled_eu: no

<7> [250.302975] i915 device info: rawclk rate: 24000 kHz

<7> [250.302979] i915 device info: display version: 9

<7> [250.302982] i915 device info: cursor_needs_physical: no

<7> [250.302985] i915 device info: has_cdclk_crawl: no

<7> [250.302988] i915 device info: has_cdclk_squash: no

<7> [250.302991] i915 device info: has_ddi: yes

<7> [250.302994] i915 device info: has_dp_mst: yes

<7> [250.302997] i915 device info: has_dsb: no

<7> [250.303000] i915 device info: has_fpga_dbg: yes

<7> [250.303004] i915 device info: has_gmch: no

<7> [250.303007] i915 device info: has_hotplug: yes

<7> [250.303010] i915 device info: has_hti: no

<7> [250.303013] i915 device info: has_ipc: yes

<7> [250.303016] i915 device info: has_overlay: no

<7> [250.303019] i915 device info: has_psr: yes

<7> [250.303022] i915 device info: has_psr_hw_tracking: yes

<7> [250.303025] i915 device info: overlay_needs_physical: no

<7> [250.303028] i915 device info: supports_tv: no

<7> [250.303031] i915 device info: has_hdcp: yes

<7> [250.303034] i915 device info: has_dmc: yes

<7> [250.303037] i915 device info: has_dsc: no

<7> [250.303040] i915 device info: iommu: enabled

<7> [250.303044] i915 device info: available engines: 40c03

<7> [250.303047] i915 device info: slice total: 2, mask=0003

<7> [250.303051] i915 device info: subslice total: 6

<7> [250.303054] i915 device info: slice0: 3 subslices, mask=00000007

<7> [250.303058] i915 device info: slice1: 3 subslices, mask=00000007

<7> [250.303061] i915 device info: slice2: 0 subslices, mask=00000000

<7> [250.303064] i915 device info: EU total: 47

<7> [250.303067] i915 device info: EU per subslice: 8

<7> [250.303070] i915 device info: has slice power gating: yes

<7> [250.303074] i915 device info: has subslice power gating: no

<7> [250.303077] i915 device info: has EU power gating: yes

<6> [250.303080] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [250.303083] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [250.303087] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [250.303094] i915: Performing live selftests with st_random_seed=0x5e92b8d0 st_timeout=500

<7> [250.303100] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [250.303108] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]

<6> [250.303125] i915: Running workarounds

<6> [250.303156] i915: Running intel_workarounds_live_selftests/live_dirty_whitelist

<7> [250.303115] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]

<7> [250.303431] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected

<7> [250.303440] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]

<7> [250.303450] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]

<7> [250.303755] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected

<7> [250.303763] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [250.303770] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [250.303777] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [250.303783] [drm:drm_client_modeset_probe] connector 114 enabled? no

<7> [250.303834] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [250.303850] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [250.303878] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [250.303891] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [250.331892] i915: Running intel_workarounds_live_selftests/live_reset_whitelist

<6> [250.331901] Checking 5 whitelisted registers on rcs0 (RING_NONPRIV) [engine]

<5> [250.336893] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds

<6> [250.338919] Checking 5 whitelisted registers on rcs0 (RING_NONPRIV) [device]

<5> [250.341885] i915 0000:00:02.0: [drm] Resetting chip for live_workarounds

<6> [250.364466] i915: Running intel_workarounds_live_selftests/live_isolated_whitelist

<6> [250.383469] i915: Running intel_workarounds_live_selftests/live_gpu_reset_workarounds

<6> [250.383485] Verifying after GPU reset...

<7> [250.383494] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [250.383759] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT_REF workarounds on global

<7> [250.383962] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 REF workarounds on rcs0

<7> [250.384159] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 CTX_REF workarounds on rcs0

<5> [250.387055] i915 0000:00:02.0: [drm] Resetting chip for live_workarounds

<7> [250.392355] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<6> [250.407471] i915: Running intel_workarounds_live_selftests/live_engine_reset_workarounds

<7> [250.407493] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [250.407751] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT_REF workarounds on global

<7> [250.407970] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 REF workarounds on rcs0

<7> [250.408187] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 CTX_REF workarounds on rcs0

<6> [250.408409] Verifying after rcs0 reset...

<5> [250.410586] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds:idle

<5> [250.414316] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds:active

<6> [250.416103] Verifying after bcs0 reset...

<5> [250.420058] i915 0000:00:02.0: [drm] Resetting bcs0 for live_workarounds:active

<6> [250.422264] Verifying after vcs0 reset...

<5> [250.426840] i915 0000:00:02.0: [drm] Resetting vcs0 for live_workarounds:active

<6> [250.428665] Verifying after vcs1 reset...

<5> [250.433382] i915 0000:00:02.0: [drm] Resetting vcs1 for live_workarounds:active

<6> [250.435035] Verifying after vecs0 reset...

<5> [250.439808] i915 0000:00:02.0: [drm] Resetting vecs0 for live_workarounds:active

<7> [250.454566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [250.454986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [250.455248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [250.455538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [250.455859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [250.479831] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [250.544824] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [250.590132] i915: probe of 0000:00:02.0 failed with error -25

<6> [250.837006] [IGT] i915_selftest: finished subtest workarounds, SUCCESS

Results for igt@i915_selftest@live@workarounds