Results for igt@i915_pm_rpm@basic-rte

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.28-g8abfd4fd5 (x86_64) (Linux: 6.6.0-rc4-linus-v6.6-rc4-g8a749fd1a872+ x86_64)
Out 
Starting subtest: basic-rte
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x79/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915]
   __intel_runtime_pm_put+0x159/0x2b0 [i915]
   intel_display_power_flush_work+0xe9/0x100 [i915]
   intel_dp_detect+0x231/0x630 [i915]
   drm_helper_probe_detect_ctx+0x42/0x100
   check_connector_changed+0x47/0x1b0
   drm_helper_hpd_irq_event+0x96/0x110
Wakeref count: 1
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   __intel_display_power_put_async+0x3d/0x160 [i915]
   intel_atomic_commit_tail+0xa2e/0xd20 [i915]
   intel_atomic_commit+0x381/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
Subtest basic-rte: SUCCESS (1.636s)
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x79/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915]
   __intel_runtime_pm_put+0x159/0x2b0 [i915]
   intel_display_power_flush_work+0xe9/0x100 [i915]
   intel_dp_detect+0x231/0x630 [i915]
   drm_helper_probe_detect_ctx+0x42/0x100
   check_connector_changed+0x47/0x1b0
   drm_helper_hpd_irq_event+0x96/0x110
Wakeref count: 1
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   __intel_display_power_put_async+0x3d/0x160 [i915]
   intel_atomic_commit_tail+0xa2e/0xd20 [i915]
   intel_atomic_commit+0x381/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
Err 
Starting subtest: basic-rte
Subtest basic-rte: SUCCESS (1.636s)
Dmesg
<7> [91.554038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.554191] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.554312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.554864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [91.591046] Console: switching to colour dummy device 80x25
<6> [91.591108] [IGT] i915_pm_rpm: executing
<6> [91.593706] [IGT] i915_pm_rpm: starting subtest basic-rte
<7> [91.593782] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [91.594358] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [91.594367] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [91.594497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.595545] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [91.595692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [91.596294] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [91.596778] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.596785] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.596940] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [91.611635] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.611641] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [91.611761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.611900] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [91.611980] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
<7> [91.611986] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [91.612127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.612791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.612919] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.613574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.614074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.614080] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.614234] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.628413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.628418] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.628527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.628655] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [91.628701] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]
<7> [91.628706] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [91.628822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.629253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.629407] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected
<7> [91.633644] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [91.633651] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [91.633773] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.634409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [91.634518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [91.635103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [91.635601] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.635607] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.635718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [91.650847] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.650852] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [91.650959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.651138] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [91.651767] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
<7> [91.651773] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [91.651889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.652869] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.653016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.653308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.653765] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.653771] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.653913] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.668623] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.668629] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.668738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.668867] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [91.669385] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]
<7> [91.669392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [91.669509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.669950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.670115] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected
<7> [91.670519] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [91.670526] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [91.670659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.671311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [91.671432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [91.672038] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [91.672536] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.672542] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.672658] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [91.687899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.687905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [91.688024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.688176] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [91.688202] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
<7> [91.688208] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [91.688325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.689310] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.689454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.689749] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.690181] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.690187] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.690337] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.706520] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.706525] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.706634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.706762] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [91.706782] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]
<7> [91.706787] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [91.706902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.707340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.707479] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected
<7> [92.709311] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.711637] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.718030] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.742482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.748526] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.749089] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.749929] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [92.750371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.750604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.751198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.751951] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [92.751951] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.752474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.752722] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.753147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.753368] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.753381] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.753608] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.756793] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.756803] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.757046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.757279] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.757516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.758216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.758362] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.758370] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.758485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.759484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.759593] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.759899] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.760329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.760335] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.760467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.775087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.775093] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.775203] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.775340] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.775351] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.776292] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.780063] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.804489] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.808982] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.809491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.809615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.809754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.810190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.810822] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [92.810827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.811018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.811174] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.811325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.811908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.812088] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.812227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.812380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.812791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.814141] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.814472] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.814586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.814889] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.815042] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.815047] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.815169] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.818047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.818053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.818177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.818313] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.818444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.819019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.819161] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.819168] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.819303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.820314] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.820431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.821025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.821551] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.821557] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.821677] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.837363] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.837368] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.837489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.837621] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.837627] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.837741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.838187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.838318] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.838325] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.839728] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.843120] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.914303] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [92.926210] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.943730] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.944888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.945555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.946369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.947398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.949133] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.950130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.950527] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [92.950894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.951882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.952603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.952630] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.953421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.958529] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.958560] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.959253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.959969] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.960744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.962078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.962908] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.964781] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.966263] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.966301] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.976676] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.001180] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.010745] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [93.011352] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.011517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.012669] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.012886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.013671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.014204] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.014215] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.014417] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.030273] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.030283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.030485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.030735] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [93.030757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [93.030950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.031474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.031703] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [93.031735] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [93.031970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.032696] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.032908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [93.033616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.034119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.034128] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.034324] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [93.049528] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.049534] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [93.049654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.049805] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.050733] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [93.051226] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [93.055028] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.079426] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.083974] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [93.084488] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.084590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.084710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.085123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.085916] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [93.085916] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [93.086284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.086396] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.086685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.086819] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.086825] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.086957] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.089784] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.089790] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.089905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.090042] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.090164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.090731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.090889] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [93.090899] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [93.091055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.091504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.091661] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [93.091779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.091918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.092338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.093114] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [93.093440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.093573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [93.093883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.094047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.094054] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.094162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [93.097018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.097023] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [93.097137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.097263] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.097385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.097938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.098083] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [93.098090] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [93.098203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.098831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.098967] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.099269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.099686] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.099692] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.099825] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.115028] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.115033] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.115153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.115284] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [93.115290] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [93.115403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.115818] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.115946] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [93.115953] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.116934] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [93.120419] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.205699] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.222749] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [93.223898] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.224413] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [93.225294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.226316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.227713] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.229427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<6> [93.230608] [IGT] i915_pm_rpm: finished subtest basic-rte, SUCCESS
<7> [93.230383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [93.231249] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [93.231536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.232287] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.232323] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.232943] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [93.238047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.238078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [93.238708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.239465] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.240200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.241863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.242840] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.244680] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [93.246115] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [93.246617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [93.256319] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.280799] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.289431] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [93.290037] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.290203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.291367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.291626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.292326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.292848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.292860] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.293126] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.309416] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.309430] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.309650] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.309908] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [93.309933] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [93.310185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.310789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.311078] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [93.311106] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [93.311297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.312023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.312245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [93.312603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.313163] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.313171] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.313388] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [93.328129] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.328135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [93.328257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.328407] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [93.328418] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [93.328550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.329202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.329334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.329948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.330432] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.330440] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.330560] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.346349] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.346354] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.346461] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.346596] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.347569] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [93.348009] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [93.351810] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.376250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.381544] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [93.382097] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.382240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.382396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.382847] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.383400] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [93.383398] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [93.383551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.383708] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.383847] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.384446] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.384603] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [93.384620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [93.384775] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.385758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.385867] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [93.386452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.386981] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.387002] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.387108] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [93.401724] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.401729] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [93.401836] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.401970] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [93.401979] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [93.402161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.402781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.402900] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.403234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.403649] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.403655] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.403768] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.418934] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.418940] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.419060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.419197] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [93.419212] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.420201] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [93.423975] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.448341] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.453005] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [93.453512] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.453632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.453763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.454185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.454810] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [93.454815] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [93.454976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.455139] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.455280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.455853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.456021] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [93.456138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.456281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.456684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.458059] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [93.458383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.458499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [93.458817] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.458949] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.458954] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.459091] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [93.461941] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.461947] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [93.462073] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.462199] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.462329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.462893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.463061] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [93.463068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [93.463184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.463804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.463911] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.464241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.464650] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.464656] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.464767] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.479393] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.479399] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.479508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.479643] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [93.479649] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [93.479765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.480223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.480354] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [93.480362] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.481767] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [93.485400] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.586569] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.609875] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [93.612544] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [93.613461] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.614527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.615311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.616324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.617428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.617829] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10
<7> [93.618042] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.618177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [93.618466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.618603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.618608] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.618713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [93.621590] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.621596] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [93.621707] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [93.621714] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [93.622045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.622152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.622451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.622591] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.622597] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.622716] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.625575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.625581] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.625691] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [93.625698] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [93.625831] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [93.630011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.630159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.630285] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.630406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.630958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.804115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.804256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.804670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<6> [93.805360] [IGT] i915_pm_rpm: exiting, ret=0
<6> [93.806639] Console: switching to colour frame buffer device 128x48
Created at 2023-10-02 01:50:22