igt@kms_force_connector_basic@force-connector-state on fi-ilk-650@linus-v6.6-rc4 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-g8abfd4fd5 (x86_64) (Linux: 6.6.0-rc4-linus-v6.6-rc4-g8a749fd1a872+ x86_64)
Out	Opened device: /dev/dri/card0 Starting subtest: force-connector-state Subtest force-connector-state: SUCCESS (0.138s)
Err	Starting subtest: force-connector-state Subtest force-connector-state: SUCCESS (0.138s)
Dmesg	<6> [129.174237] Console: switching to colour dummy device 80x25 <6> [129.174480] [IGT] kms_force_connector_basic: executing <7> [129.223479] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [129.225043] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [129.225754] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [129.227806] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing <7> [129.227957] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.228105] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.229161] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [129.229905] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.231467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.231786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.232288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.232603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.232614] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.232910] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.233930] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.233941] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.234455] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [129.234465] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.234477] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.234487] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.234497] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.234506] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.234597] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.234608] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.234918] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [129.235208] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.235651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.235941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.236424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.236862] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.236871] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.237159] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.238172] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.238182] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.238588] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [129.238597] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.238606] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.238615] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.238624] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.238633] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.238733] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.238744] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.239041] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [129.239324] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.239863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.240143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.240602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.240894] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.240902] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.241186] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.242292] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.242304] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.242732] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [129.242741] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.242752] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.242761] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.242769] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.242778] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <6> [129.243154] [IGT] kms_force_connector_basic: starting subtest force-connector-state <7> [129.249904] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [129.249921] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [129.250470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.250793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [129.251289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.251572] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.251644] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.251932] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [129.253092] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.253102] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [129.253411] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [129.254304] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] <7> [129.254316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1] <7> [129.254656] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected <7> [129.255171] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.255183] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.255499] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [129.255827] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.256361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.256726] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.257235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.257529] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.257538] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.257871] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.258903] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.258913] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.259317] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [129.259325] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.259336] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.259344] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.259352] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.259361] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.259397] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [129.259407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [129.259959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.260255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [129.260711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.261015] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.261023] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.261313] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [129.262412] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.262422] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [129.262757] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [129.262798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] <7> [129.262808] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1] <7> [129.263130] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected <7> [129.302933] [drm:drm_mode_setcrtc] [CRTC:45:pipe A] <7> [129.303101] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [129.303563] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [129.304051] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [129.304635] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in has_pch_encoder (expected yes, found no) <7> [129.305197] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_lanes (expected 1, found 0) <7> [129.305785] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_m_n (expected tu 64 data 6039797/8388608 link 125829/524288, found tu 0, data 0/0 link 0/0) <7> [129.306344] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in output_types (expected 0x00000002, found 0x00000000) <7> [129.306942] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [129.307504] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1024, found 0) <7> [129.308100] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 1344, found 0) <7> [129.308598] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1024, found 0) <7> [129.309188] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 1344, found 0) <7> [129.309780] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1048, found 0) <7> [129.310343] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 1184, found 0) <7> [129.310907] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 768, found 0) <7> [129.311394] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 806, found 0) <7> [129.311989] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 768, found 0) <7> [129.312554] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 806, found 0) <7> [129.313171] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 771, found 0) <7> [129.313735] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 777, found 0) <7> [129.314082] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1024, found 0) <7> [129.314412] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 1344, found 0) <7> [129.314755] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1024, found 0) <7> [129.315085] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 1344, found 0) <7> [129.315415] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1048, found 0) <7> [129.315783] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 1184, found 0) <7> [129.316103] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 768, found 0) <7> [129.316408] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 806, found 0) <7> [129.316737] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 768, found 0) <7> [129.317054] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 806, found 0) <7> [129.317360] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 771, found 0) <7> [129.317687] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 777, found 0) <7> [129.318002] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [129.318308] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [129.318632] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [129.318945] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [129.319252] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 64800, found 0) <7> [129.319566] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 64800, found 0) <7> [129.319897] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in port_clock (expected 64800, found 0) <7> [129.320213] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [129.320516] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:45:pipe A] releasing PCH DPLL A <7> [129.320897] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [129.321209] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [129.321523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:45:pipe A] enable: no [modeset] <7> [129.321858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:primary A] fb: [NOFB], visible: no <7> [129.322319] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [129.353963] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable PCH DPLL A (active 0x1, on? 1) for [CRTC:45:pipe A] <7> [129.354540] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling PCH DPLL A <7> [129.355371] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:62:CRT] <7> [129.355583] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:63:HDMI C] <7> [129.355824] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:71:DP C] <7> [129.356177] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:61:VGA-1] <7> [129.356531] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A <7> [129.356991] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL B <7> [129.357376] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:45:pipe A] <7> [129.359659] [drm:drm_mode_setcrtc] [CRTC:60:pipe B] <7> [129.363866] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 2 or reprobing <7> [129.363879] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.364160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.364420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.364863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.365111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.365131] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.365378] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.366427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.366448] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.366845] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [129.366855] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.366865] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.366873] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.366880] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.366887] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.366954] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.367183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.367427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.367884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.368131] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.368149] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.368395] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.369385] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.369403] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.369786] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [129.369795] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.369802] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.369809] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.369815] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.369821] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.370078] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 2 to 1 or reprobing <7> [129.370087] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.370095] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] status updated from connected to disconnected <7> [129.370470] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] disconnected <7> [129.370873] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.370887] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] disconnected <7> [129.371250] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 1 to 0 or reprobing <7> [129.371264] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.371278] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.371592] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [129.371881] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.372258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.372935] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] status updated from disconnected to connected <7> [129.373181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.373597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.373901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.374312] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.374515] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.374522] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.374744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.375750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.375763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.376067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.376470] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [129.376482] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.376494] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.376504] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.376512] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.376521] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.376616] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.376628] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.377237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.377453] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [129.377668] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.377902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.378122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.378515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.378731] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.379196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.379446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.379453] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.379770] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.380725] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.380735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.380950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.381230] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [129.381237] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.381244] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.381249] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.381254] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.381259] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <6> [129.381593] [IGT] kms_force_connector_basic: finished subtest force-connector-state, SUCCESS <7> [129.381879] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [129.382411] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing <7> [129.382422] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.382431] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.382666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.382920] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [129.383110] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.383299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.383522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.384047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.384235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.384605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.384840] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.384852] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.385091] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.386035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.386047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.386272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.386560] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [129.386567] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.386575] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.386581] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.386586] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.386592] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.386671] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.386682] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.386950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.387146] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [129.387333] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.387590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.387843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.388282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.388468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.388830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.389024] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.389030] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.389218] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.390146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.390154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.390341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.390616] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [129.390622] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.390629] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.390634] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.390641] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.390675] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.390898] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:61:VGA-1] EDID override reset <7> [129.390947] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.390955] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.391160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.391372] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [129.391602] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.391861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.392119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.392507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.392735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.393149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.393337] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.393343] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.393531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.394444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.394452] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.394637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.394972] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [129.394981] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.394991] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.394999] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.395007] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.395015] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.395278] [drm:status_store] [CONNECTOR:64:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [129.395287] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [129.395295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [129.395497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.396293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.396481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [129.396985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.397212] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.397220] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.397404] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [129.398305] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.398314] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [129.398504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.398750] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [129.398822] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [129.398834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [129.399065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.399672] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.399909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [129.400278] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.400465] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.400471] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.400680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [129.401581] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.401587] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [129.401800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.402023] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [129.402173] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:64:HDMI-A-1] EDID override reset <7> [129.402201] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [129.402207] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [129.402416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.402806] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.402997] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [129.403365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.403552] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.403558] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.403792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [129.404747] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.404757] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [129.404946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.405153] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [129.405313] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:72:DP-1] EDID override reset <7> [129.405340] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] <7> [129.405347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1] <7> [129.405546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.405850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.406062] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected <6> [129.406794] [IGT] kms_force_connector_basic: exiting, ret=0 <7> [129.407210] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing <7> [129.407220] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.407229] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.407443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.407640] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [129.407876] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.408092] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.408313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.408766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.409078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.409592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.409921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.409932] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.410235] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.411306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.411317] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.411614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.412125] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [129.412136] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.412148] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.412161] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.412170] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.412180] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.412285] [drm:status_store] [CONNECTOR:64:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [129.412294] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [129.412306] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [129.412615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.413199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.413493] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [129.414033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.414329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.414338] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.414631] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [129.415691] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.415702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [129.416003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.416327] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [129.416897] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [129.417491] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:61:VGA-1] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 0, max platform bpp 36) <7> [129.417849] i915 0000:00:02.0: [drm:ilk_fdi_compute_config [i915]] checking fdi config on pipe A, lanes 1 <7> [129.418162] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:45:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [129.418481] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [129.418821] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [129.419139] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [129.419459] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in has_pch_encoder (expected no, found yes) <7> [129.419790] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_lanes (expected 0, found 1) <7> [129.420110] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6039797/8388608 link 125829/524288) <7> [129.420430] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000002) <7> [129.420766] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [129.421083] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1024) <7> [129.421389] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 1344) <7> [129.421775] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1024) <7> [129.422089] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 1344) <7> [129.422401] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1048) <7> [129.422778] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 1184) <7> [129.423064] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 768) <7> [129.423369] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 806) <7> [129.423695] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 768) <7> [129.424012] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 806) <7> [129.424317] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 771) <7> [129.424624] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 777) <7> [129.424956] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1024) <7> [129.425276] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 1344) <7> [129.425581] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1024) <7> [129.425915] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 1344) <7> [129.426234] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1048) <7> [129.426550] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 1184) <7> [129.426943] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 768) <7> [129.427258] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 806) <7> [129.427565] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 768) <7> [129.427900] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 806) <7> [129.428217] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 771) <7> [129.428523] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 777) <7> [129.429017] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [129.429327] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [129.429634] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [129.429980] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [129.430298] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 64800) <7> [129.430613] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 64800) <7> [129.430951] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in port_clock (expected 0, found 64800) <7> [129.431270] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [129.431621] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:primary A] min cdclk (64800 kHz) > [CRTC:45:pipe A] min cdclk (0 kHz) <7> [129.431948] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [129.432265] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [129.432580] i915 0000:00:02.0: [drm:ibx_get_dpll [i915]] [CRTC:45:pipe A] using pre-allocated PCH DPLL A <7> [129.432918] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:45:pipe A] reserving PCH DPLL A <7> [129.433237] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:45:pipe A] enable: yes [modeset] <7> [129.433543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: ANALOG (0x2), output format: RGB, sink format: RGB <7> [129.433884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [129.434199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [129.434503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [129.434868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [129.435182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [129.435487] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] fdi: lanes: 1; data_m: 6039797, data_n: 8388608, link_m: 125829, link_n: 524288, tu: 64 <7> [129.435826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [129.436143] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [129.436447] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [129.436785] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.437104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.437409] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64800, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa <7> [129.437774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1024x768": 60 64800 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.438091] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64800, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa <7> [129.438396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 64800, pipe src: 1024x768+0+0, pixel rate 64800 <7> [129.438729] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 0, ips linetime: 0 <7> [129.439041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [129.439352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [129.439695] i915 0000:00:02.0: [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x84100010, dpll_md: 0x0, fp0: 0x10c09, fp1: 0x10c09 <7> [129.440009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x3 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [129.440324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [129.440642] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [129.440979] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [129.441296] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [129.441613] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [129.441944] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:primary A] fb: [FB:77] 1024x768 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [129.442264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [129.442569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1024.000000x768.000000+0.000000+0.000000 dst: 1024x768+0+0 <7> [129.442906] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:sprite A] fb: [NOFB], visible: no <7> [129.443220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:41:cursor A] fb: [NOFB], visible: no <7> [129.443774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.444175] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:62:CRT] <7> [129.444490] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:63:HDMI C] <7> [129.444823] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:71:DP C] <7> [129.445134] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A <7> [129.445454] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL B <7> [129.446234] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [129.446906] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI_RX_IIR 0x100 <7> [129.447211] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI train 1 done. <7> [129.447665] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI_RX_IIR 0x600 <7> [129.448108] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI train 2 done. <7> [129.448420] i915 0000:00:02.0: [drm:ilk_pch_enable [i915]] FDI train done <7> [129.448746] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable PCH DPLL A (active 0x1, on? 0) for [CRTC:45:pipe A] <7> [129.449058] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling PCH DPLL A <7> [129.500958] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:61:VGA-1] <7> [129.501292] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:45:pipe A] <7> [129.501651] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A <7> [129.502393] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7> [129.502421] [drm:drm_client_modeset_probe] <7> [129.503114] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] <7> [129.503172] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.503526] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [129.503880] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.505141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.505551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.506134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.506537] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.506553] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.506994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.508143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.508158] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.508890] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes : <7> [129.508911] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.508927] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.508940] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.508952] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.508965] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.508979] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [129.508994] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [129.509604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.510023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [129.510603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.511026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.511039] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.511437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [129.512557] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.512568] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [129.512897] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [129.512909] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] <7> [129.512920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1] <7> [129.513248] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected <7> [129.513259] [drm:drm_client_modeset_probe] connector 61 enabled? yes <7> [129.513267] [drm:drm_client_modeset_probe] connector 64 enabled? no <7> [129.513274] [drm:drm_client_modeset_probe] connector 72 enabled? no <7> [129.513415] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [129.513444] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 61 <7> [129.513452] [drm:drm_client_modeset_probe] looking for preferred mode on connector 61 0 <7> [129.513459] [drm:drm_client_modeset_probe] found mode 1024x768 <7> [129.513466] [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config <7> [129.513529] [drm:drm_client_modeset_probe] desired mode 1024x768 set on crtc 45 (0,0) <6> [129.534785] Console: switching to colour frame buffer device 128x48

<6> [129.174237] Console: switching to colour dummy device 80x25

<6> [129.174480] [IGT] kms_force_connector_basic: executing

<7> [129.223479] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [129.225043] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<7> [129.225754] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [129.227806] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing

<7> [129.227957] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.228105] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.229161] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [129.229905] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.231467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.231786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.232288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.232603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.232614] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.232910] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.233930] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.233941] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.234455] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.234465] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.234477] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.234487] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.234497] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.234506] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.234597] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.234608] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.234918] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [129.235208] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.235651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.235941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.236424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.236862] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.236871] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.237159] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.238172] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.238182] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.238588] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.238597] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.238606] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.238615] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.238624] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.238633] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.238733] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.238744] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.239041] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [129.239324] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.239863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.240143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.240602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.240894] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.240902] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.241186] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.242292] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.242304] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.242732] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.242741] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.242752] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.242761] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.242769] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.242778] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<6> [129.243154] [IGT] kms_force_connector_basic: starting subtest force-connector-state

<7> [129.249904] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1]

<7> [129.249921] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [129.250470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.250793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [129.251289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.251572] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.251644] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.251932] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [129.253092] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.253102] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [129.253411] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [129.254304] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1]

<7> [129.254316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]

<7> [129.254656] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected

<7> [129.255171] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.255183] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.255499] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [129.255827] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.256361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.256726] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.257235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.257529] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.257538] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.257871] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.258903] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.258913] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.259317] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.259325] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.259336] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.259344] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.259352] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.259361] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.259397] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1]

<7> [129.259407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [129.259959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.260255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [129.260711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.261015] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.261023] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.261313] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [129.262412] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.262422] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [129.262757] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [129.262798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1]

<7> [129.262808] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]

<7> [129.263130] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected

<7> [129.302933] [drm:drm_mode_setcrtc] [CRTC:45:pipe A]

<7> [129.303101] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [129.303563] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [129.304051] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [129.304635] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in has_pch_encoder (expected yes, found no)

<7> [129.305197] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_lanes (expected 1, found 0)

<7> [129.305785] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_m_n (expected tu 64 data 6039797/8388608 link 125829/524288, found tu 0, data 0/0 link 0/0)

<7> [129.306344] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in output_types (expected 0x00000002, found 0x00000000)

<7> [129.306942] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [129.307504] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1024, found 0)

<7> [129.308100] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 1344, found 0)

<7> [129.308598] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1024, found 0)

<7> [129.309188] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 1344, found 0)

<7> [129.309780] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1048, found 0)

<7> [129.310343] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 1184, found 0)

<7> [129.310907] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 768, found 0)

<7> [129.311394] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 806, found 0)

<7> [129.311989] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 768, found 0)

<7> [129.312554] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 806, found 0)

<7> [129.313171] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 771, found 0)

<7> [129.313735] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 777, found 0)

<7> [129.314082] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1024, found 0)

<7> [129.314412] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 1344, found 0)

<7> [129.314755] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1024, found 0)

<7> [129.315085] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 1344, found 0)

<7> [129.315415] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1048, found 0)

<7> [129.315783] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 1184, found 0)

<7> [129.316103] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 768, found 0)

<7> [129.316408] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 806, found 0)

<7> [129.316737] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 768, found 0)

<7> [129.317054] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 806, found 0)

<7> [129.317360] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 771, found 0)

<7> [129.317687] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 777, found 0)

<7> [129.318002] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [129.318308] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [129.318632] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [129.318945] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [129.319252] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 64800, found 0)

<7> [129.319566] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 64800, found 0)

<7> [129.319897] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in port_clock (expected 64800, found 0)

<7> [129.320213] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [129.320516] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:45:pipe A] releasing PCH DPLL A

<7> [129.320897] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [129.321209] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [129.321523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:45:pipe A] enable: no [modeset]

<7> [129.321858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:primary A] fb: [NOFB], visible: no

<7> [129.322319] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [129.353963] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable PCH DPLL A (active 0x1, on? 1) for [CRTC:45:pipe A]

<7> [129.354540] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling PCH DPLL A

<7> [129.355371] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:62:CRT]

<7> [129.355583] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:63:HDMI C]

<7> [129.355824] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:71:DP C]

<7> [129.356177] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:61:VGA-1]

<7> [129.356531] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A

<7> [129.356991] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL B

<7> [129.357376] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:45:pipe A]

<7> [129.359659] [drm:drm_mode_setcrtc] [CRTC:60:pipe B]

<7> [129.363866] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 2 or reprobing

<7> [129.363879] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.364160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.364420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.364863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.365111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.365131] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.365378] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.366427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.366448] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.366845] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.366855] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.366865] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.366873] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.366880] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.366887] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.366954] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.367183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.367427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.367884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.368131] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.368149] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.368395] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.369385] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.369403] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.369786] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.369795] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.369802] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.369809] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.369815] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.369821] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.370078] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 2 to 1 or reprobing

<7> [129.370087] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.370095] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] status updated from connected to disconnected

<7> [129.370470] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] disconnected

<7> [129.370873] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.370887] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] disconnected

<7> [129.371250] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 1 to 0 or reprobing

<7> [129.371264] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.371278] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.371592] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [129.371881] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.372258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.372935] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] status updated from disconnected to connected

<7> [129.373181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.373597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.373901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.374312] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.374515] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.374522] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.374744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.375750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.375763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.376067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.376470] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.376482] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.376494] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.376504] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.376512] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.376521] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.376616] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.376628] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.377237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.377453] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [129.377668] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.377902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.378122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.378515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.378731] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.379196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.379446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.379453] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.379770] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.380725] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.380735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.380950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.381230] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.381237] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.381244] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.381249] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.381254] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.381259] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<6> [129.381593] [IGT] kms_force_connector_basic: finished subtest force-connector-state, SUCCESS

<7> [129.381879] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [129.382411] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing

<7> [129.382422] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.382431] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.382666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.382920] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [129.383110] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.383299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.383522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.384047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.384235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.384605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.384840] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.384852] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.385091] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.386035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.386047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.386272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.386560] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.386567] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.386575] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.386581] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.386586] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.386592] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.386671] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.386682] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.386950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.387146] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [129.387333] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.387590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.387843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.388282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.388468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.388830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.389024] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.389030] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.389218] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.390146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.390154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.390341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.390616] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.390622] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.390629] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.390634] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.390641] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.390675] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.390898] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:61:VGA-1] EDID override reset

<7> [129.390947] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.390955] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.391160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.391372] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [129.391602] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.391861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.392119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.392507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.392735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.393149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.393337] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.393343] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.393531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.394444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.394452] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.394637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.394972] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.394981] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.394991] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.394999] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.395007] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.395015] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.395278] [drm:status_store] [CONNECTOR:64:HDMI-A-1] force updated from 0 to 0 or reprobing

<7> [129.395287] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1]

<7> [129.395295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [129.395497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.396293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.396481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [129.396985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.397212] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.397220] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.397404] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [129.398305] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.398314] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [129.398504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.398750] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [129.398822] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1]

<7> [129.398834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [129.399065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.399672] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.399909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [129.400278] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.400465] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.400471] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.400680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [129.401581] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.401587] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [129.401800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.402023] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [129.402173] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:64:HDMI-A-1] EDID override reset

<7> [129.402201] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1]

<7> [129.402207] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [129.402416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.402806] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.402997] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [129.403365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.403552] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.403558] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.403792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [129.404747] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.404757] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [129.404946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.405153] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [129.405313] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:72:DP-1] EDID override reset

<7> [129.405340] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1]

<7> [129.405347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]

<7> [129.405546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.405850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.406062] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected

<6> [129.406794] [IGT] kms_force_connector_basic: exiting, ret=0

<7> [129.407210] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing

<7> [129.407220] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.407229] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.407443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.407640] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [129.407876] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.408092] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.408313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.408766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.409078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.409592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.409921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.409932] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.410235] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.411306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.411317] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.411614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.412125] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.412136] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.412148] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.412161] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.412170] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.412180] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.412285] [drm:status_store] [CONNECTOR:64:HDMI-A-1] force updated from 0 to 0 or reprobing

<7> [129.412294] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1]

<7> [129.412306] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [129.412615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.413199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.413493] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [129.414033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.414329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.414338] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.414631] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [129.415691] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.415702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [129.416003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.416327] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [129.416897] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<7> [129.417491] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:61:VGA-1] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 0, max platform bpp 36)

<7> [129.417849] i915 0000:00:02.0: [drm:ilk_fdi_compute_config [i915]] checking fdi config on pipe A, lanes 1

<7> [129.418162] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:45:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [129.418481] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [129.418821] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [129.419139] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [129.419459] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in has_pch_encoder (expected no, found yes)

<7> [129.419790] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_lanes (expected 0, found 1)

<7> [129.420110] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6039797/8388608 link 125829/524288)

<7> [129.420430] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000002)

<7> [129.420766] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [129.421083] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1024)

<7> [129.421389] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 1344)

<7> [129.421775] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1024)

<7> [129.422089] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 1344)

<7> [129.422401] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1048)

<7> [129.422778] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 1184)

<7> [129.423064] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 768)

<7> [129.423369] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 806)

<7> [129.423695] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 768)

<7> [129.424012] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 806)

<7> [129.424317] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 771)

<7> [129.424624] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 777)

<7> [129.424956] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1024)

<7> [129.425276] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 1344)

<7> [129.425581] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1024)

<7> [129.425915] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 1344)

<7> [129.426234] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1048)

<7> [129.426550] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 1184)

<7> [129.426943] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 768)

<7> [129.427258] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 806)

<7> [129.427565] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 768)

<7> [129.427900] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 806)

<7> [129.428217] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 771)

<7> [129.428523] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 777)

<7> [129.429017] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [129.429327] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [129.429634] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [129.429980] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [129.430298] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 64800)

<7> [129.430613] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 64800)

<7> [129.430951] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in port_clock (expected 0, found 64800)

<7> [129.431270] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [129.431621] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:primary A] min cdclk (64800 kHz) > [CRTC:45:pipe A] min cdclk (0 kHz)

<7> [129.431948] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [129.432265] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [129.432580] i915 0000:00:02.0: [drm:ibx_get_dpll [i915]] [CRTC:45:pipe A] using pre-allocated PCH DPLL A

<7> [129.432918] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:45:pipe A] reserving PCH DPLL A

<7> [129.433237] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:45:pipe A] enable: yes [modeset]

<7> [129.433543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: ANALOG (0x2), output format: RGB, sink format: RGB

<7> [129.433884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [129.434199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [129.434503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [129.434868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [129.435182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [129.435487] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] fdi: lanes: 1; data_m: 6039797, data_n: 8388608, link_m: 125829, link_n: 524288, tu: 64

<7> [129.435826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [129.436143] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [129.436447] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [129.436785] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.437104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.437409] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64800, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa

<7> [129.437774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1024x768": 60 64800 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.438091] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64800, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa

<7> [129.438396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 64800, pipe src: 1024x768+0+0, pixel rate 64800

<7> [129.438729] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 0, ips linetime: 0

<7> [129.439041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [129.439352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [129.439695] i915 0000:00:02.0: [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x84100010, dpll_md: 0x0, fp0: 0x10c09, fp1: 0x10c09

<7> [129.440009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x3 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [129.440324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [129.440642] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [129.440979] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [129.441296] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [129.441613] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [129.441944] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:primary A] fb: [FB:77] 1024x768 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [129.442264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [129.442569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1024.000000x768.000000+0.000000+0.000000 dst: 1024x768+0+0

<7> [129.442906] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:sprite A] fb: [NOFB], visible: no

<7> [129.443220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:41:cursor A] fb: [NOFB], visible: no

<7> [129.443774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.444175] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:62:CRT]

<7> [129.444490] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:63:HDMI C]

<7> [129.444823] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:71:DP C]

<7> [129.445134] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A

<7> [129.445454] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL B

<7> [129.446234] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [129.446906] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI_RX_IIR 0x100

<7> [129.447211] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI train 1 done.

<7> [129.447665] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI_RX_IIR 0x600

<7> [129.448108] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI train 2 done.

<7> [129.448420] i915 0000:00:02.0: [drm:ilk_pch_enable [i915]] FDI train done

<7> [129.448746] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable PCH DPLL A (active 0x1, on? 0) for [CRTC:45:pipe A]

<7> [129.449058] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling PCH DPLL A

<7> [129.500958] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:61:VGA-1]

<7> [129.501292] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:45:pipe A]

<7> [129.501651] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A

<7> [129.502393] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]

<7> [129.502421] [drm:drm_client_modeset_probe]

<7> [129.503114] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1]

<7> [129.503172] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.503526] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [129.503880] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.505141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.505551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.506134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.506537] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.506553] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.506994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.508143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.508158] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.508890] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.508911] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.508927] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.508940] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.508952] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.508965] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.508979] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1]

<7> [129.508994] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [129.509604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.510023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [129.510603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.511026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.511039] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.511437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [129.512557] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.512568] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [129.512897] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [129.512909] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1]

<7> [129.512920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]

<7> [129.513248] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:DP-1] disconnected

<7> [129.513259] [drm:drm_client_modeset_probe] connector 61 enabled? yes

<7> [129.513267] [drm:drm_client_modeset_probe] connector 64 enabled? no

<7> [129.513274] [drm:drm_client_modeset_probe] connector 72 enabled? no

<7> [129.513415] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [129.513444] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 61

<7> [129.513452] [drm:drm_client_modeset_probe] looking for preferred mode on connector 61 0

<7> [129.513459] [drm:drm_client_modeset_probe] found mode 1024x768

<7> [129.513466] [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config

<7> [129.513529] [drm:drm_client_modeset_probe] desired mode 1024x768 set on crtc 45 (0,0)

<6> [129.534785] Console: switching to colour frame buffer device 128x48

Results for igt@kms_force_connector_basic@force-connector-state