igt@i915_selftest@live@gt_tlb on fi-skl-guc@linus-v6.6-rc3 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-gd991240f6 (x86_64) (Linux: 6.6.0-rc3-linus-v6.6-rc3-g6465e260f487+ x86_64)
Out	Starting dynamic subtest: gt_tlb Dynamic subtest gt_tlb: SUCCESS (1.450s)
Err	Starting dynamic subtest: gt_tlb Dynamic subtest gt_tlb: SUCCESS (1.450s)
Dmesg	<6> [199.875684] [IGT] i915_selftest: starting dynamic subtest gt_tlb <5> [199.973193] Setting dangerous option enable_guc - tainting kernel <5> [199.973203] Setting dangerous option live_selftests - tainting kernel <7> [200.006637] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [200.006867] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [200.007040] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [200.007051] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [200.007229] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [200.007524] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [200.007721] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [200.008460] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [200.008645] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [200.008825] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [200.009001] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [200.009007] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [200.009719] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [200.009744] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [200.009954] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [200.010452] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018 <7> [200.010701] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [200.010917] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [200.011128] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [200.011352] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [200.015098] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [200.015270] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [200.015418] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [200.015564] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [200.015710] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [200.015823] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [200.015932] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [200.016036] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [200.016140] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [200.016253] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [200.016356] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [200.016459] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [200.016561] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [200.016662] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [200.017118] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [200.017305] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [200.017478] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [200.017649] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [200.017820] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [200.017988] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [200.018157] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [200.018333] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [200.018500] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [200.018670] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [200.018837] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [200.019004] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [200.019167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [200.019337] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [200.019499] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [200.019666] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [200.019832] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [200.019998] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [200.020165] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [200.020333] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [200.020498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [200.020661] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [200.020823] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [200.020985] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [200.021147] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8 <7> [200.021314] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [200.021478] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [200.021641] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [200.021818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [200.022027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [200.022216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [200.022386] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [200.022557] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [200.022724] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [200.022890] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [200.023107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.023279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [200.023443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [200.023616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [200.023814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [200.023979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [200.024143] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [200.024313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [200.024502] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <6> [200.025483] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <6> [200.025910] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled <7> [200.025912] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 <7> [200.026317] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [200.026518] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [200.026680] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [200.026839] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [200.026994] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [200.027148] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [200.027316] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [200.027470] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [200.027623] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [200.027777] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [200.029282] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [200.030704] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [200.030976] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [200.031184] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [200.031544] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C] <7> [200.031692] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [200.031906] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] Using AUX CH D (VBT) <7> [200.032062] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D] <7> [200.032412] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [200.032572] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D] <7> [200.032717] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [200.032931] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] Using AUX CH A (VBT) <7> [200.033089] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E] <7> [200.033339] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [200.033769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [200.033949] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [200.034122] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [200.034293] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [200.034474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [200.034631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [200.034786] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [200.034940] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [200.035094] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [200.035264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [200.035432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [200.035605] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [200.035761] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [200.035916] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A <7> [200.036071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A <7> [200.036231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A <7> [200.036406] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B <7> [200.036556] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C <7> [200.036712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A <7> [200.036869] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [200.037032] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [200.037191] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [200.037380] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [200.037602] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [200.037766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled <7> [200.037928] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled <7> [200.038087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled <7> [200.038264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled <7> [200.038436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [200.038587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [200.038735] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [200.038883] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [200.039044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [200.039196] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [200.039418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [200.039590] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [200.039750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [200.039903] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [200.040054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [200.040215] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [200.040432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [200.040592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [200.040749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [200.040904] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [200.041061] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [200.041224] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [200.041398] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [200.043495] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K) <7> [200.043647] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [200.043774] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [200.043912] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [200.044061] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [200.045099] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [200.045267] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [200.045414] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0 <7> [200.047901] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [200.048090] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [200.048279] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [200.069123] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f <7> [200.069312] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [200.069465] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [200.069614] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [200.069762] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2 <7> [200.069911] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006 <7> [200.070058] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [200.070214] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [200.070385] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [200.070535] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [200.070684] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [200.070831] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [200.070979] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [200.071127] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [200.071282] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [200.072476] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [200.072480] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [200.078333] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [200.079035] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [200.079224] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [200.079226] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [200.086391] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [200.086597] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [200.086757] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [200.086913] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [200.087067] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [200.087250] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [200.087697] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [200.087822] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [200.087938] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [200.088051] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [200.090599] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [200.090910] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event <7> [200.091193] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 <7> [200.091797] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event <7> [200.092086] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event <7> [200.092424] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 <7> [200.093013] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event <6> [200.093063] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [200.094639] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [200.116235] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [200.117336] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input70 <7> [200.118121] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [200.118857] [drm:drm_client_modeset_probe] <7> [200.118913] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [200.118853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [200.118924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [200.119184] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [200.119225] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [200.119121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [200.119236] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] <7> [200.119243] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [200.119361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [200.119497] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] status updated from unknown to disconnected <7> [200.119511] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected <7> [200.119517] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] <7> [200.119525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [200.119589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [200.119992] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] status updated from unknown to disconnected <7> [200.120029] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected <7> [200.120043] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] <7> [200.120051] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [200.120284] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected <7> [200.120301] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected <7> [200.120314] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] <7> [200.120315] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [200.120321] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [200.120531] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] status updated from unknown to disconnected <7> [200.120538] i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9 <7> [200.120543] i915 device info: graphics version: 9 <7> [200.120546] i915 device info: media version: 9 <7> [200.120547] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected <7> [200.120549] i915 device info: graphics stepping: G0 <7> [200.120551] i915 device info: media stepping: G0 <7> [200.120553] i915 device info: display stepping: G0 <7> [200.120556] i915 device info: base die stepping: ** <7> [200.120558] i915 device info: gt: 2 <7> [200.120561] i915 device info: memory-regions: 0x21 <7> [200.120561] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [200.120566] i915 device info: page-sizes: 0x11000 <7> [200.120566] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [200.120570] i915 device info: platform: SKYLAKE <7> [200.120570] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [200.120573] i915 device info: ppgtt-size: 48 <7> [200.120573] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [200.120577] i915 device info: ppgtt-type: 2 <7> [200.120577] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [200.120580] i915 device info: dma_mask_size: 39 <7> [200.120581] i915 device info: is_mobile: no <7> [200.120582] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [200.120584] i915 device info: is_lp: no <7> [200.120586] i915 device info: require_force_probe: no <7> [200.120588] i915 device info: is_dgfx: no <7> [200.120590] i915 device info: has_64bit_reloc: yes <7> [200.120593] i915 device info: has_64k_pages: no <7> [200.120596] i915 device info: gpu_reset_clobbers_display: no <7> [200.120598] i915 device info: has_reset_engine: yes <7> [200.120601] i915 device info: has_3d_pipeline: yes <7> [200.120603] i915 device info: has_4tile: no <7> [200.120606] i915 device info: has_flat_ccs: no <7> [200.120609] i915 device info: has_global_mocs: no <7> [200.120611] i915 device info: has_gmd_id: no <7> [200.120614] i915 device info: has_gt_uc: yes <7> [200.120617] i915 device info: has_heci_pxp: no <7> [200.120619] i915 device info: has_heci_gscfi: no <7> [200.120622] i915 device info: has_guc_deprivilege: no <7> [200.120624] i915 device info: has_l3_ccs_read: no <7> [200.120625] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [200.120627] i915 device info: has_l3_dpf: no <7> [200.120629] i915 device info: has_llc: yes <7> [200.120631] i915 device info: has_logical_ring_contexts: yes <7> [200.120634] i915 device info: has_logical_ring_elsq: no <7> [200.120636] i915 device info: has_media_ratio_mode: no <7> [200.120638] i915 device info: has_mslice_steering: no <7> [200.120639] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [200.120641] i915 device info: has_oa_bpc_reporting: no <7> [200.120643] i915 device info: has_oa_slice_contrib_limits: no <7> [200.120644] i915 device info: has_oam: no <7> [200.120647] i915 device info: has_one_eu_per_fuse_bit: no <7> [200.120650] i915 device info: has_pxp: no <7> [200.120653] i915 device info: has_rc6: yes <7> [200.120655] i915 device info: has_rc6p: no <7> [200.120658] i915 device info: has_rps: yes <7> [200.120661] i915 device info: has_runtime_pm: yes <7> [200.120663] i915 device info: has_snoop: no <7> [200.120663] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [200.120666] i915 device info: has_coherent_ggtt: yes <7> [200.120668] i915 device info: tuning_thread_rr_after_dep: no <7> [200.120669] i915 device info: unfenced_needs_alignment: no <7> [200.120671] i915 device info: hws_needs_physical: no <7> [200.120673] i915 device info: has_pooled_eu: no <7> [200.120676] i915 device info: rawclk rate: 24000 kHz <6> [200.120679] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [200.120679] i915 device info: display version: 9 <7> [200.120681] i915 device info: cursor_needs_physical: no <7> [200.120683] i915 device info: has_cdclk_crawl: no <7> [200.120685] i915 device info: has_cdclk_squash: no <7> [200.120688] i915 device info: has_ddi: yes <7> [200.120690] i915 device info: has_dp_mst: yes <7> [200.120693] i915 device info: has_dsb: no <7> [200.120696] i915 device info: has_fpga_dbg: yes <7> [200.120698] i915 device info: has_gmch: no <7> [200.120701] i915 device info: has_hotplug: yes <7> [200.120703] i915 device info: has_hti: no <7> [200.120706] i915 device info: has_ipc: yes <7> [200.120708] i915 device info: has_overlay: no <7> [200.120711] i915 device info: has_psr: yes <7> [200.120713] i915 device info: has_psr_hw_tracking: yes <7> [200.120716] i915 device info: overlay_needs_physical: no <7> [200.120718] i915 device info: supports_tv: no <7> [200.120721] i915 device info: has_hdcp: yes <7> [200.120723] i915 device info: has_dmc: yes <7> [200.120726] i915 device info: has_dsc: no <7> [200.120728] i915 device info: iommu: enabled <7> [200.120731] i915 device info: available engines: 40403 <7> [200.120734] i915 device info: slice total: 1, mask=0001 <7> [200.120738] i915 device info: subslice total: 3 <7> [200.120740] i915 device info: slice0: 3 subslices, mask=00000007 <7> [200.120744] i915 device info: slice1: 0 subslices, mask=00000000 <7> [200.120747] i915 device info: slice2: 0 subslices, mask=00000000 <7> [200.120750] i915 device info: EU total: 24 <7> [200.120752] i915 device info: EU per subslice: 8 <7> [200.120755] i915 device info: has slice power gating: no <7> [200.120757] i915 device info: has subslice power gating: no <7> [200.120760] i915 device info: has EU power gating: yes <6> [200.120763] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [200.120765] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [200.120768] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [200.120773] i915: Performing live selftests with st_random_seed=0x578b5368 st_timeout=500 <6> [200.120777] i915: Running gt_tlb <6> [200.120800] i915: Running intel_tlb_live_selftests/invalidate_full <7> [200.121033] [drm:drm_client_modeset_probe] <7> [200.121063] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [200.121069] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [200.121244] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [200.121252] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] <7> [200.121259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [200.121457] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected <7> [200.121465] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] <7> [200.121473] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [200.121668] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected <7> [200.121673] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] <7> [200.121678] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [200.121823] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected <7> [200.121828] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] <7> [200.121833] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [200.122014] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected <7> [200.122021] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [200.122027] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [200.122032] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [200.122037] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [200.122041] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [200.122046] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [200.122078] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [200.122090] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [200.122108] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [200.122119] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [200.122184] [drm:drm_client_modeset_probe] <7> [200.122243] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [200.122250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [200.122403] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [200.122408] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] <7> [200.122413] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [200.122656] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected <7> [200.122664] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] <7> [200.122672] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [200.122880] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected <7> [200.122885] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] <7> [200.122890] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [200.123073] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected <7> [200.123078] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] <7> [200.123083] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [200.123253] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected <7> [200.123257] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [200.123261] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [200.123266] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [200.123270] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [200.123274] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [200.123278] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [200.123314] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [200.123325] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [200.123345] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [200.123356] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [200.137293] rcs0((efault)): Sampling db22867cc758, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:db22867cc758+4 <6> [200.151582] rcs0((efault)): Sampling 4a339049a470, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:4a339049a470+10 <6> [200.164918] rcs0((efault)): Sampling 286723641070, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:286723641000+100 <6> [200.177027] rcs0((efault)): Sampling 40b34c72168, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:40b34c70000+10000 <6> [200.188874] rcs0((efault)): Sampling 79f392d43b30, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:79f300000000+100000000 <6> [200.200912] rcs0((efault)): Sampling 8843adfc96f8, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:0+1000000000000 <6> [200.225245] rcs0((efault)): Sampling 73bb21a06838, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:73bb21a06838+4 <6> [200.238948] rcs0((efault)): Sampling cfa852208b18, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:cfa852208b10+10 <7> [200.242665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <6> [200.253104] rcs0((efault)): Sampling 7e2f71c00818, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:7e2f71c00800+100 <6> [200.268033] rcs0((efault)): Sampling c8e933c076b0, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:c8e933c00000+10000 <6> [200.284331] rcs0((efault)): Sampling 7292a9202b28, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:729200000000+100000000 <6> [200.299112] rcs0((efault)): Sampling ff1be800c168, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:0+1000000000000 <6> [200.332169] bcs0((efault)): Sampling f066ffe89030, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:f066ffe89030+4 <6> [200.347458] bcs0((efault)): Sampling 767f07fb1e8, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:767f07fb1e0+10 <6> [200.362339] bcs0((efault)): Sampling 1bf8b65782f8, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:1bf8b6578200+100 <6> [200.377192] bcs0((efault)): Sampling 40394fce9388, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:40394fce0000+10000 <6> [200.393294] bcs0((efault)): Sampling baf319e9d870, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:baf300000000+100000000 <6> [200.408200] bcs0((efault)): Sampling 6dffcbc3def8, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:0+1000000000000 <6> [200.438157] bcs0((efault)): Sampling 9baea780fc98, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:9baea780fc98+4 <6> [200.453237] bcs0((efault)): Sampling 3c322ac0f2a8, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:3c322ac0f2a0+10 <6> [200.468289] bcs0((efault)): Sampling 513a440b6d8, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:513a440b600+100 <6> [200.483247] bcs0((efault)): Sampling 7b468b80e1a0, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:7b468b800000+10000 <6> [200.498295] bcs0((efault)): Sampling bcdeb980cff8, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:bcde00000000+100000000 <6> [200.513254] bcs0((efault)): Sampling 8cc658004890, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:0+1000000000000 <6> [200.543999] vcs0((efault)): Sampling 42f9fd7b96c8, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:42f9fd7b96c8+4 <6> [200.558437] vcs0((efault)): Sampling 35e68e9f8aa8, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:35e68e9f8aa0+10 <6> [200.575108] vcs0((efault)): Sampling 12052acdc590, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:12052acdc500+100 <6> [200.590850] vcs0((efault)): Sampling 7330c9204a20, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:7330c9200000+10000 <6> [200.606407] vcs0((efault)): Sampling c262ce404980, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:c26200000000+100000000 <6> [200.621337] vcs0((efault)): Sampling 629e883fb40, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:0+1000000000000 <6> [200.651003] vcs0((efault)): Sampling 64dcff00e610, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:64dcff00e610+4 <6> [200.665547] vcs0((efault)): Sampling 713f24057a8, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:713f24057a0+10 <6> [200.681182] vcs0((efault)): Sampling 3cc6ce205648, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:3cc6ce205600+100 <6> [200.696159] vcs0((efault)): Sampling 4e9f51c06f58, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:4e9f51c00000+10000 <6> [200.711303] vcs0((efault)): Sampling 66e73900d9e8, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:66e700000000+100000000 <6> [200.726289] vcs0((efault)): Sampling 98dd8804198, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:0+1000000000000 <6> [200.758066] vecs0((efault)): Sampling 111b45d938f0, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:111b45d938f0+4 <6> [200.773368] vecs0((efault)): Sampling c51eaf2f7fe0, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:c51eaf2f7fe0+10 <6> [200.788329] vecs0((efault)): Sampling 109e6eebce80, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:109e6eebce00+100 <6> [200.803329] vecs0((efault)): Sampling 315a3dbb3c88, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:315a3dbb0000+10000 <6> [200.818355] vecs0((efault)): Sampling 1334f417e7e8, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:133400000000+100000000 <6> [200.833302] vecs0((efault)): Sampling a69b8806b5e0, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:0+1000000000000 <6> [200.864005] vecs0((efault)): Sampling 35cf3a2044c8, with alignment 10000, using PTE size 10000 (phys 400000, sg 11000), invalidate:35cf3a2044c8+4 <6> [200.878315] vecs0((efault)): Sampling 2f7034c0da48, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:2f7034c0da40+10 <6> [200.893484] vecs0((efault)): Sampling 1d51f1c0a0f8, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:1d51f1c0a000+100 <6> [200.909332] vecs0((efault)): Sampling fc9b1e602060, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:fc9b1e600000+10000 <6> [200.924349] vecs0((efault)): Sampling 57507cc0ed28, with alignment 10000, using PTE size 10000 (phys 400000, sg 11000), invalidate:575000000000+100000000 <6> [200.939266] vecs0((efault)): Sampling e739cb600c88, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:0+1000000000000 <7> [200.967437] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [200.968615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [200.969446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [200.970247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [200.971007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [201.008535] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [201.078420] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [201.134622] i915: probe of 0000:00:02.0 failed with error -25 <6> [201.326154] [IGT] i915_selftest: finished subtest gt_tlb, SUCCESS

<6> [199.875684] [IGT] i915_selftest: starting dynamic subtest gt_tlb

<5> [199.973193] Setting dangerous option enable_guc - tainting kernel

<5> [199.973203] Setting dangerous option live_selftests - tainting kernel

<7> [200.006637] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [200.006867] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [200.007040] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [200.007051] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [200.007229] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [200.007524] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [200.007721] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [200.008460] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [200.008645] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [200.008825] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [200.009001] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [200.009007] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [200.009719] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [200.009744] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [200.009954] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [200.010452] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018

<7> [200.010701] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [200.010917] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [200.011128] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [200.011352] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [200.015098] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [200.015270] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [200.015418] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [200.015564] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [200.015710] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [200.015823] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [200.015932] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [200.016036] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [200.016140] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [200.016253] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [200.016356] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [200.016459] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [200.016561] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [200.016662] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [200.017118] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [200.017305] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [200.017478] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [200.017649] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [200.017820] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [200.017988] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [200.018157] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [200.018333] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [200.018500] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [200.018670] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [200.018837] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [200.019004] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [200.019167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [200.019337] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [200.019499] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [200.019666] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [200.019832] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [200.019998] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [200.020165] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [200.020333] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [200.020498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [200.020661] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [200.020823] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [200.020985] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [200.021147] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8

<7> [200.021314] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [200.021478] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [200.021641] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [200.021818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [200.022027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [200.022216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [200.022386] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [200.022557] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [200.022724] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [200.022890] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [200.023107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.023279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [200.023443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [200.023616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [200.023814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [200.023979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [200.024143] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [200.024313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [200.024502] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<6> [200.025483] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<6> [200.025910] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled

<7> [200.025912] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0

<7> [200.026317] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [200.026518] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [200.026680] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [200.026839] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [200.026994] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [200.027148] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [200.027316] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [200.027470] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [200.027623] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [200.027777] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [200.029282] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [200.030704] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [200.030976] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [200.031184] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [200.031544] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C]

<7> [200.031692] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [200.031906] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] Using AUX CH D (VBT)

<7> [200.032062] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D]

<7> [200.032412] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [200.032572] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D]

<7> [200.032717] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [200.032931] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] Using AUX CH A (VBT)

<7> [200.033089] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E]

<7> [200.033339] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [200.033769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [200.033949] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [200.034122] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [200.034293] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [200.034474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [200.034631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [200.034786] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [200.034940] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [200.035094] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [200.035264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [200.035432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [200.035605] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [200.035761] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [200.035916] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [200.036071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [200.036231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A

<7> [200.036406] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B

<7> [200.036556] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C

<7> [200.036712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [200.036869] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [200.037032] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [200.037191] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [200.037380] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [200.037602] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [200.037766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled

<7> [200.037928] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled

<7> [200.038087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled

<7> [200.038264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled

<7> [200.038436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [200.038587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [200.038735] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [200.038883] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [200.039044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [200.039196] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [200.039418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [200.039590] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [200.039750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [200.039903] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [200.040054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [200.040215] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [200.040432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [200.040592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [200.040749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [200.040904] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [200.041061] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [200.041224] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [200.041398] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [200.043495] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K)

<7> [200.043647] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [200.043774] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [200.043912] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [200.044061] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [200.045099] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [200.045267] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [200.045414] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0

<7> [200.047901] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [200.048090] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [200.048279] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [200.069123] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f

<7> [200.069312] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [200.069465] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [200.069614] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [200.069762] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2

<7> [200.069911] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006

<7> [200.070058] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [200.070214] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [200.070385] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [200.070535] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [200.070684] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [200.070831] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [200.070979] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [200.071127] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [200.071282] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [200.072476] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [200.072480] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [200.078333] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [200.079035] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [200.079224] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [200.079226] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [200.086391] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [200.086597] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [200.086757] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [200.086913] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [200.087067] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [200.087250] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [200.087697] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [200.087822] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [200.087938] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [200.088051] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [200.090599] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [200.090910] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event

<7> [200.091193] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1

<7> [200.091797] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event

<7> [200.092086] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event

<7> [200.092424] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2

<7> [200.093013] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event

<6> [200.093063] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [200.094639] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [200.116235] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [200.117336] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input70

<7> [200.118121] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [200.118857] [drm:drm_client_modeset_probe]

<7> [200.118913] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [200.118853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [200.118924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [200.119184] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [200.119225] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [200.119121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [200.119236] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]

<7> [200.119243] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [200.119361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [200.119497] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] status updated from unknown to disconnected

<7> [200.119511] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [200.119517] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]

<7> [200.119525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [200.119589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [200.119992] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] status updated from unknown to disconnected

<7> [200.120029] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected

<7> [200.120043] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]

<7> [200.120051] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [200.120284] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected

<7> [200.120301] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [200.120314] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]

<7> [200.120315] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [200.120321] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [200.120531] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] status updated from unknown to disconnected

<7> [200.120538] i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9

<7> [200.120543] i915 device info: graphics version: 9

<7> [200.120546] i915 device info: media version: 9

<7> [200.120547] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected

<7> [200.120549] i915 device info: graphics stepping: G0

<7> [200.120551] i915 device info: media stepping: G0

<7> [200.120553] i915 device info: display stepping: G0

<7> [200.120556] i915 device info: base die stepping: **

<7> [200.120558] i915 device info: gt: 2

<7> [200.120561] i915 device info: memory-regions: 0x21

<7> [200.120561] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [200.120566] i915 device info: page-sizes: 0x11000

<7> [200.120566] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [200.120570] i915 device info: platform: SKYLAKE

<7> [200.120570] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [200.120573] i915 device info: ppgtt-size: 48

<7> [200.120573] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [200.120577] i915 device info: ppgtt-type: 2

<7> [200.120577] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [200.120580] i915 device info: dma_mask_size: 39

<7> [200.120581] i915 device info: is_mobile: no

<7> [200.120582] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [200.120584] i915 device info: is_lp: no

<7> [200.120586] i915 device info: require_force_probe: no

<7> [200.120588] i915 device info: is_dgfx: no

<7> [200.120590] i915 device info: has_64bit_reloc: yes

<7> [200.120593] i915 device info: has_64k_pages: no

<7> [200.120596] i915 device info: gpu_reset_clobbers_display: no

<7> [200.120598] i915 device info: has_reset_engine: yes

<7> [200.120601] i915 device info: has_3d_pipeline: yes

<7> [200.120603] i915 device info: has_4tile: no

<7> [200.120606] i915 device info: has_flat_ccs: no

<7> [200.120609] i915 device info: has_global_mocs: no

<7> [200.120611] i915 device info: has_gmd_id: no

<7> [200.120614] i915 device info: has_gt_uc: yes

<7> [200.120617] i915 device info: has_heci_pxp: no

<7> [200.120619] i915 device info: has_heci_gscfi: no

<7> [200.120622] i915 device info: has_guc_deprivilege: no

<7> [200.120624] i915 device info: has_l3_ccs_read: no

<7> [200.120625] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [200.120627] i915 device info: has_l3_dpf: no

<7> [200.120629] i915 device info: has_llc: yes

<7> [200.120631] i915 device info: has_logical_ring_contexts: yes

<7> [200.120634] i915 device info: has_logical_ring_elsq: no

<7> [200.120636] i915 device info: has_media_ratio_mode: no

<7> [200.120638] i915 device info: has_mslice_steering: no

<7> [200.120639] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [200.120641] i915 device info: has_oa_bpc_reporting: no

<7> [200.120643] i915 device info: has_oa_slice_contrib_limits: no

<7> [200.120644] i915 device info: has_oam: no

<7> [200.120647] i915 device info: has_one_eu_per_fuse_bit: no

<7> [200.120650] i915 device info: has_pxp: no

<7> [200.120653] i915 device info: has_rc6: yes

<7> [200.120655] i915 device info: has_rc6p: no

<7> [200.120658] i915 device info: has_rps: yes

<7> [200.120661] i915 device info: has_runtime_pm: yes

<7> [200.120663] i915 device info: has_snoop: no

<7> [200.120663] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [200.120666] i915 device info: has_coherent_ggtt: yes

<7> [200.120668] i915 device info: tuning_thread_rr_after_dep: no

<7> [200.120669] i915 device info: unfenced_needs_alignment: no

<7> [200.120671] i915 device info: hws_needs_physical: no

<7> [200.120673] i915 device info: has_pooled_eu: no

<7> [200.120676] i915 device info: rawclk rate: 24000 kHz

<6> [200.120679] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [200.120679] i915 device info: display version: 9

<7> [200.120681] i915 device info: cursor_needs_physical: no

<7> [200.120683] i915 device info: has_cdclk_crawl: no

<7> [200.120685] i915 device info: has_cdclk_squash: no

<7> [200.120688] i915 device info: has_ddi: yes

<7> [200.120690] i915 device info: has_dp_mst: yes

<7> [200.120693] i915 device info: has_dsb: no

<7> [200.120696] i915 device info: has_fpga_dbg: yes

<7> [200.120698] i915 device info: has_gmch: no

<7> [200.120701] i915 device info: has_hotplug: yes

<7> [200.120703] i915 device info: has_hti: no

<7> [200.120706] i915 device info: has_ipc: yes

<7> [200.120708] i915 device info: has_overlay: no

<7> [200.120711] i915 device info: has_psr: yes

<7> [200.120713] i915 device info: has_psr_hw_tracking: yes

<7> [200.120716] i915 device info: overlay_needs_physical: no

<7> [200.120718] i915 device info: supports_tv: no

<7> [200.120721] i915 device info: has_hdcp: yes

<7> [200.120723] i915 device info: has_dmc: yes

<7> [200.120726] i915 device info: has_dsc: no

<7> [200.120728] i915 device info: iommu: enabled

<7> [200.120731] i915 device info: available engines: 40403

<7> [200.120734] i915 device info: slice total: 1, mask=0001

<7> [200.120738] i915 device info: subslice total: 3

<7> [200.120740] i915 device info: slice0: 3 subslices, mask=00000007

<7> [200.120744] i915 device info: slice1: 0 subslices, mask=00000000

<7> [200.120747] i915 device info: slice2: 0 subslices, mask=00000000

<7> [200.120750] i915 device info: EU total: 24

<7> [200.120752] i915 device info: EU per subslice: 8

<7> [200.120755] i915 device info: has slice power gating: no

<7> [200.120757] i915 device info: has subslice power gating: no

<7> [200.120760] i915 device info: has EU power gating: yes

<6> [200.120763] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [200.120765] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [200.120768] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [200.120773] i915: Performing live selftests with st_random_seed=0x578b5368 st_timeout=500

<6> [200.120800] i915: Running intel_tlb_live_selftests/invalidate_full

<7> [200.121033] [drm:drm_client_modeset_probe]

<7> [200.121063] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [200.121069] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [200.121244] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [200.121252] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]

<7> [200.121259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [200.121457] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [200.121465] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]

<7> [200.121473] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [200.121668] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected

<7> [200.121673] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]

<7> [200.121678] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [200.121823] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [200.121828] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]

<7> [200.121833] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [200.122014] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected

<7> [200.122021] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [200.122027] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [200.122032] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [200.122037] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [200.122041] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [200.122046] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [200.122078] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [200.122090] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [200.122108] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [200.122119] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [200.122184] [drm:drm_client_modeset_probe]

<7> [200.122243] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [200.122250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [200.122403] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [200.122408] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]

<7> [200.122413] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [200.122656] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [200.122664] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]

<7> [200.122672] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [200.122880] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected

<7> [200.122885] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]

<7> [200.122890] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [200.123073] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [200.123078] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]

<7> [200.123083] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [200.123253] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected

<7> [200.123257] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [200.123261] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [200.123266] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [200.123270] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [200.123274] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [200.123278] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [200.123314] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [200.123325] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [200.123345] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [200.123356] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [200.137293] rcs0((efault)): Sampling db22867cc758, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:db22867cc758+4

<6> [200.151582] rcs0((efault)): Sampling 4a339049a470, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:4a339049a470+10

<6> [200.164918] rcs0((efault)): Sampling 286723641070, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:286723641000+100

<6> [200.177027] rcs0((efault)): Sampling 40b34c72168, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:40b34c70000+10000

<6> [200.188874] rcs0((efault)): Sampling 79f392d43b30, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:79f300000000+100000000

<6> [200.200912] rcs0((efault)): Sampling 8843adfc96f8, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:0+1000000000000

<6> [200.225245] rcs0((efault)): Sampling 73bb21a06838, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:73bb21a06838+4

<6> [200.238948] rcs0((efault)): Sampling cfa852208b18, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:cfa852208b10+10

<7> [200.242665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<6> [200.253104] rcs0((efault)): Sampling 7e2f71c00818, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:7e2f71c00800+100

<6> [200.268033] rcs0((efault)): Sampling c8e933c076b0, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:c8e933c00000+10000

<6> [200.284331] rcs0((efault)): Sampling 7292a9202b28, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:729200000000+100000000

<6> [200.299112] rcs0((efault)): Sampling ff1be800c168, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:0+1000000000000

<6> [200.332169] bcs0((efault)): Sampling f066ffe89030, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:f066ffe89030+4

<6> [200.347458] bcs0((efault)): Sampling 767f07fb1e8, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:767f07fb1e0+10

<6> [200.362339] bcs0((efault)): Sampling 1bf8b65782f8, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:1bf8b6578200+100

<6> [200.377192] bcs0((efault)): Sampling 40394fce9388, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:40394fce0000+10000

<6> [200.393294] bcs0((efault)): Sampling baf319e9d870, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:baf300000000+100000000

<6> [200.408200] bcs0((efault)): Sampling 6dffcbc3def8, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:0+1000000000000

<6> [200.438157] bcs0((efault)): Sampling 9baea780fc98, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:9baea780fc98+4

<6> [200.453237] bcs0((efault)): Sampling 3c322ac0f2a8, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:3c322ac0f2a0+10

<6> [200.468289] bcs0((efault)): Sampling 513a440b6d8, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:513a440b600+100

<6> [200.483247] bcs0((efault)): Sampling 7b468b80e1a0, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:7b468b800000+10000

<6> [200.498295] bcs0((efault)): Sampling bcdeb980cff8, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:bcde00000000+100000000

<6> [200.513254] bcs0((efault)): Sampling 8cc658004890, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:0+1000000000000

<6> [200.543999] vcs0((efault)): Sampling 42f9fd7b96c8, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:42f9fd7b96c8+4

<6> [200.558437] vcs0((efault)): Sampling 35e68e9f8aa8, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:35e68e9f8aa0+10

<6> [200.575108] vcs0((efault)): Sampling 12052acdc590, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:12052acdc500+100

<6> [200.590850] vcs0((efault)): Sampling 7330c9204a20, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:7330c9200000+10000

<6> [200.606407] vcs0((efault)): Sampling c262ce404980, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:c26200000000+100000000

<6> [200.621337] vcs0((efault)): Sampling 629e883fb40, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:0+1000000000000

<6> [200.651003] vcs0((efault)): Sampling 64dcff00e610, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:64dcff00e610+4

<6> [200.665547] vcs0((efault)): Sampling 713f24057a8, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:713f24057a0+10

<6> [200.681182] vcs0((efault)): Sampling 3cc6ce205648, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:3cc6ce205600+100

<6> [200.696159] vcs0((efault)): Sampling 4e9f51c06f58, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:4e9f51c00000+10000

<6> [200.711303] vcs0((efault)): Sampling 66e73900d9e8, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:66e700000000+100000000

<6> [200.726289] vcs0((efault)): Sampling 98dd8804198, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:0+1000000000000

<6> [200.758066] vecs0((efault)): Sampling 111b45d938f0, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:111b45d938f0+4

<6> [200.773368] vecs0((efault)): Sampling c51eaf2f7fe0, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:c51eaf2f7fe0+10

<6> [200.788329] vecs0((efault)): Sampling 109e6eebce80, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:109e6eebce00+100

<6> [200.803329] vecs0((efault)): Sampling 315a3dbb3c88, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:315a3dbb0000+10000

<6> [200.818355] vecs0((efault)): Sampling 1334f417e7e8, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:133400000000+100000000

<6> [200.833302] vecs0((efault)): Sampling a69b8806b5e0, with alignment 1000, using PTE size 1000 (phys 400000, sg 11000), invalidate:0+1000000000000

<6> [200.864005] vecs0((efault)): Sampling 35cf3a2044c8, with alignment 10000, using PTE size 10000 (phys 400000, sg 11000), invalidate:35cf3a2044c8+4

<6> [200.878315] vecs0((efault)): Sampling 2f7034c0da48, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:2f7034c0da40+10

<6> [200.893484] vecs0((efault)): Sampling 1d51f1c0a0f8, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:1d51f1c0a000+100

<6> [200.909332] vecs0((efault)): Sampling fc9b1e602060, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:fc9b1e600000+10000

<6> [200.924349] vecs0((efault)): Sampling 57507cc0ed28, with alignment 10000, using PTE size 10000 (phys 400000, sg 11000), invalidate:575000000000+100000000

<6> [200.939266] vecs0((efault)): Sampling e739cb600c88, with alignment 10000, using PTE size 11000 (phys 400000, sg 11000), invalidate:0+1000000000000

<7> [200.967437] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [200.968615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [200.969446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [200.970247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [200.971007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [201.008535] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [201.078420] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [201.134622] i915: probe of 0000:00:02.0 failed with error -25

<6> [201.326154] [IGT] i915_selftest: finished subtest gt_tlb, SUCCESS

Results for igt@i915_selftest@live@gt_tlb