Results for igt@i915_pm_rpm@basic-rte

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.28-gd991240f6 (x86_64) (Linux: 6.6.0-rc3-linus-v6.6-rc3-g6465e260f487+ x86_64)
Out 
Starting subtest: basic-rte
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x79/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915]
   __intel_runtime_pm_put+0x159/0x2b0 [i915]
   intel_hdmi_detect+0xcb/0x160 [i915]
   drm_helper_probe_detect_ctx+0x89/0x100
   check_connector_changed+0x47/0x1b0
   drm_helper_hpd_irq_event+0x96/0x110
   i915_hpd_poll_init_work+0xaf/0xf0 [i915]
Wakeref count: 1
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   __intel_display_power_put_async+0x3d/0x160 [i915]
   intel_atomic_commit_tail+0xa2e/0xd20 [i915]
   intel_atomic_commit+0x381/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
Subtest basic-rte: SUCCESS (1.601s)
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x79/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915]
   intel_runtime_suspend+0xec/0x2a0 [i915]
   pci_pm_runtime_suspend+0x5a/0x1a0
   __rpm_callback+0x3c/0x110
   rpm_callback+0x58/0x70
   rpm_suspend+0x118/0x5f0
   pm_runtime_work+0x9f/0xb0
Wakeref count: 1
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   __intel_display_power_put_async+0x3d/0x160 [i915]
   intel_atomic_commit_tail+0xa2e/0xd20 [i915]
   intel_atomic_commit+0x381/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
Err 
Starting subtest: basic-rte
Subtest basic-rte: SUCCESS (1.601s)
Dmesg
<6> [91.000004] Console: switching to colour dummy device 80x25
<6> [91.000060] [IGT] i915_pm_rpm: executing
<6> [91.002654] [IGT] i915_pm_rpm: starting subtest basic-rte
<7> [91.002715] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [91.003253] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [91.003263] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [91.003434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.004514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [91.004627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [91.005217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [91.005726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.005731] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.005833] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [91.019995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.020000] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [91.020108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.020235] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [91.020311] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
<7> [91.020316] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [91.020428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.021432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.021543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.022143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.022637] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.022642] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.022744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.037379] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.037384] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.037501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.037624] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [91.037692] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]
<7> [91.037697] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [91.037810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.038253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.038381] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected
<7> [91.042738] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [91.042745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [91.042862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.043880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [91.044028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [91.044684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [91.045182] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.045187] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.045292] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [91.059932] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.059938] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [91.060062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.060194] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [91.060811] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
<7> [91.060817] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [91.060931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.061936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.062098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.062411] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.062813] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.062817] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.062952] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.077605] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.077611] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.077715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.077839] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [91.078391] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]
<7> [91.078397] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [91.078535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.078957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.079105] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected
<7> [91.079488] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [91.079496] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [91.079625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.080270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [91.080375] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [91.080699] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [91.081126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.081130] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.081262] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [91.095928] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [91.095933] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [91.096078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.096220] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [91.096240] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
<7> [91.096245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [91.096391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.097041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.097147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.097456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.097871] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.097877] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.097999] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.113195] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.113201] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.113307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.113434] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [91.113454] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]
<7> [91.113459] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [91.113574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.114002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.114130] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected
<7> [92.116341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.118259] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.131029] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.155536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.160485] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.161018] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.161846] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [92.162015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.162188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.162354] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.163027] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [92.163367] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [92.163384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.163790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.163951] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.164337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.164514] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.164521] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.164678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.167674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.167682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.167851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.168065] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.168250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.168868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.169360] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.169372] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.169548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.170618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.170781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.171438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.171923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.171932] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.172146] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.187903] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.187911] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.188080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.188261] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.188402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.188582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.189108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.189741] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.189957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.190157] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.190319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.190914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.191125] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.191135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.192162] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.195913] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.291106] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [92.303224] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.320675] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.321812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.322505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.323605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.324767] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.326825] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.328207] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [92.327929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.328526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.328842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.329032] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.329039] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.329178] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.332056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.332063] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.332192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.332319] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.332441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.333011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.333152] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.333166] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.333289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.334323] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.334445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.334738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.335193] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.335200] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.335310] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.349936] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.349942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.350071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.350213] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.351327] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.351335] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.351747] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.355120] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.379426] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.385632] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.386156] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.386235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.386659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.386798] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.386817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.387243] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.390974] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.415313] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.420881] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.421398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.421547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.421710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.422167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.422802] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [92.422799] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.423202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.423337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.423653] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.423803] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.423808] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.423941] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.426830] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.426837] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.426977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.427154] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.427308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.427895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.428097] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.428112] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.428262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.429303] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.429440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.430054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.430552] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.430557] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.430690] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.445368] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.445374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.445494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.445648] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.445659] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.445796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.446254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.446410] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.447345] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.447825] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.451395] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.475049] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.479818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.480334] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.480467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.480589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.481007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.481646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.482011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.482135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.482448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.482570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.482576] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.482679] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.485517] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.485523] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.485643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.485769] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.485891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.486463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.486623] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.486631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.486744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.487379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.487488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.487773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.488193] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.488198] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.488321] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.502476] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.502483] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.502615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.502755] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.502764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.502882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.503332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.503470] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.503484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.503596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.504234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.504365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.504659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.505080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.505085] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.505210] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.519367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.519374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.519502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.519638] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.519647] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.519759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.520396] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.520505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.520789] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.521211] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.521218] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.521354] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.535540] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.535546] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.535668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.535804] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.535812] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.535930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.536375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.536541] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.536550] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.537532] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.541168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.594066] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.601001] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.601555] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.601772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.602071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.602348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<6> [92.603774] [IGT] i915_pm_rpm: finished subtest basic-rte, SUCCESS
<7> [92.603830] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [92.604229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.604729] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [92.604700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.604937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.605402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.605618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.605626] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.605816] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.609050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.609061] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.609299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.609562] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.609815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.610533] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.610816] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.610836] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.611139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.612352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.612573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.613296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.613899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.613909] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.614198] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.631096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.631108] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.631335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.631623] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.632670] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.633787] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.633807] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.636801] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.661438] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.672792] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.673355] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.673478] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.673971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.674245] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.674268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.674442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.675576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.675752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.676414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.676921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.676931] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.677142] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.692369] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.692376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.692507] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.692654] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.692667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.693620] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.697101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.721537] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.726572] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.727090] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.727209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.727339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.727750] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.728390] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [92.728388] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.728737] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.728842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.729161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.729284] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.729288] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.729393] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.732207] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.732212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.732323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.732448] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.732568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.733132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.733270] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.733284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.733405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.733825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.733956] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.733975] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.734103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.735094] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.735199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.735774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.736289] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.736294] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.736397] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.750504] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.750509] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.750615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.750751] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.750760] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.750877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.751507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.751614] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.751902] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.752315] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.752319] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.752423] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.766546] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.766551] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.766656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.766792] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.766807] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.767781] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.771111] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.795506] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.800001] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.800537] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.800660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.800790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.801216] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.801782] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.801973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.802178] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.802364] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.802998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.803176] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.803188] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.803302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.804293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.804399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.804974] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.805479] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.805484] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.805587] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.820726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.820731] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.820837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.820968] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.820974] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.821118] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.822090] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.825112] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.849529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.854572] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.855093] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.855205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.855848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.855962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.856552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.856965] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.856970] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.857095] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.871282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.871288] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.871402] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.871546] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.871553] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.871678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.872118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.872282] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.872294] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.872416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.873423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.873576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.873872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.874299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.874306] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.874440] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.889577] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.889583] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.889687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.889817] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.889824] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.889933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.890618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.890735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.891036] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.891461] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.891466] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.891569] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.906700] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.906706] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.906811] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.906945] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.907882] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.907888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.908378] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.912041] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.936425] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.941589] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [92.942565] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.942658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.943102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.943249] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [92.943265] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [92.943390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.944391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.944507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [92.945100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [92.945597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.945603] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.945715] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [92.960371] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [92.960376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [92.960503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.960643] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [92.960649] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [92.960770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.961419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.961534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.961830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.962256] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.962261] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.962375] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.977074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.977080] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.977184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.977319] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.978253] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [92.978259] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [92.978722] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [92.982116] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.006531] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.011568] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [93.012098] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.012189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.012623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.012759] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [93.012771] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [93.012885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.013500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.013606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [93.014189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.014686] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.014693] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.014810] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [93.028942] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.028947] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [93.029069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.029223] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [93.029229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [93.029344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.029962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.030080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.030390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.030794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.030798] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.030902] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.045555] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.045561] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.045681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.045812] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [93.045818] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [93.045930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.046373] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.046533] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [93.046541] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.047490] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [93.051114] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.129928] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.143076] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [93.144154] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.144305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.144484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.144957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.145139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [93.145660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.146047] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10
<7> [93.146297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.146470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [93.146847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [93.147027] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.147034] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.147153] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [93.150240] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [93.150246] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [93.150370] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:95:HDMI-A-1] Same epoch counter 8
<7> [93.150378] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [93.150710] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.150827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.151176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.151338] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.151343] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.151459] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.154551] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.154557] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.154679] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [93.154686] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [93.154837] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [93.158728] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.158904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.159072] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.159221] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.159807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.340715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.341507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.342569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<6> [93.344284] [IGT] i915_pm_rpm: exiting, ret=0
<6> [93.350325] Console: switching to colour frame buffer device 128x48
Created at 2023-09-24 23:29:06