igt@i915_selftest@live@hangcheck on fi-cfl-guc@linus-v6.6-rc3 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-gd991240f6 (x86_64) (Linux: 6.6.0-rc3-linus-v6.6-rc3-g6465e260f487+ x86_64)
Out	Starting dynamic subtest: hangcheck Dynamic subtest hangcheck: SUCCESS (24.168s)
Err	Starting dynamic subtest: hangcheck Dynamic subtest hangcheck: SUCCESS (24.168s)
Dmesg	<6> [271.673820] [IGT] i915_selftest: starting dynamic subtest hangcheck <5> [271.764052] Setting dangerous option enable_guc - tainting kernel <5> [271.764058] Setting dangerous option live_selftests - tainting kernel <7> [271.793557] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [271.793723] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [271.793860] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [271.793869] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP) <7> [271.793994] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [271.794165] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [271.794277] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [271.794923] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [271.795083] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [271.795237] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [271.795390] i915 0000:00:02.0: vgaarb: deactivate vga console <7> [271.795570] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047 <7> [271.795732] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [271.795987] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8c90a018 <7> [271.796134] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [271.796261] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [271.796385] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [271.796509] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [271.800653] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [271.800791] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [271.800916] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [271.801040] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [271.801165] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [271.801262] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [271.801355] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [271.801497] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [271.801686] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [271.801909] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [271.802052] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [271.802194] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [271.802336] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [271.802477] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [271.803177] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [271.803334] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209 <7> [271.803473] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [271.803724] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [271.803915] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [271.804053] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [271.804260] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [271.804396] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [271.804565] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [271.804793] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [271.804930] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [271.805068] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [271.805202] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [271.805392] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [271.805660] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [271.805909] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [271.806105] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [271.806298] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [271.806495] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [271.806783] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [271.806986] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [271.807120] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [271.807253] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [271.807385] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9 <7> [271.807548] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [271.807757] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 10 <7> [271.807907] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [271.808093] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 10 <7> [271.808226] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [271.808358] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [271.808491] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [271.808698] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [271.808917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [271.809064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [271.809315] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [271.809512] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [271.809750] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [271.810013] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [271.810310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [271.810447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [271.810610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [271.810809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [271.810986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [271.811120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [271.811253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [271.811387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [271.811589] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [271.812553] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [271.813115] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [271.813493] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [271.813757] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [271.813956] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [271.814120] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [271.814264] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [271.814388] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [271.814547] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [271.814718] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [271.814843] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [271.814968] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [271.816000] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [271.816975] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [271.817256] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [271.817451] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [271.820346] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [271.820588] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [271.820816] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [271.820993] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [271.821141] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [271.821275] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [271.821408] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [271.821595] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [271.821800] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [271.821933] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [271.822065] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [271.822230] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [271.822415] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [271.822611] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [271.822802] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [271.822922] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [271.823042] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [271.823207] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [271.823444] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [271.823704] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [271.823990] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [271.824175] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [271.824389] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [271.824666] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [272.044527] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.055524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.066524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.077524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.088526] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.099524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.110524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.121524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.132526] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.143524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.154524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.165525] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.176527] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.187524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.198523] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.209523] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.220527] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.231525] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.242525] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.253524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.264527] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.275524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.286524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.297525] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.308526] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.319525] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.330525] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.341524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.352526] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.363524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.374524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.385524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [272.385701] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [272.385713] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [272.385773] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [272.385939] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [272.386121] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [272.386249] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [272.386592] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [272.386789] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [272.387098] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI D/PHY D] Using AUX CH D (VBT) <7> [272.387367] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI D/PHY D] <7> [272.387967] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [272.388155] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D/PHY D] <7> [272.388325] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:108:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [272.388684] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:119:DDI E/PHY E] Using AUX CH A (VBT) <7> [272.388891] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:119:DDI E/PHY E] <7> [272.389157] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [272.389644] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [272.389929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [272.390139] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [272.390325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [272.390543] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [272.390804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [272.390991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [272.391176] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [272.391363] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [272.391623] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [272.391881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [272.392066] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [272.392255] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [272.392443] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [272.392730] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D/PHY D] hw state readout: disabled, pipe A <7> [272.392978] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST A] hw state readout: disabled, pipe A <7> [272.393160] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST B] hw state readout: disabled, pipe B <7> [272.393337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST C] hw state readout: disabled, pipe C <7> [272.393571] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DDI E/PHY E] hw state readout: disabled, pipe A <7> [272.393811] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [272.394027] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [272.394220] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [272.394416] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [272.394753] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [272.394985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [272.395182] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [272.395375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:HDMI-A-3] hw state readout: disabled <7> [272.395655] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:120:DP-2] hw state readout: disabled <7> [272.395906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [272.396084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [272.396264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [272.396440] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [272.396715] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [272.396982] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [272.397159] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [272.397336] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [272.397576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [272.397810] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [272.397990] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [272.398169] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [272.398411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [272.398681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [272.398953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [272.399140] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [272.399324] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [272.399504] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [272.399766] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [272.404148] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [272.404328] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [272.404487] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [272.404735] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [272.404970] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7> [272.406348] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [272.406566] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [272.406780] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [272.413922] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [272.414116] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [272.414266] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [272.437404] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [272.437635] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [272.437797] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [272.437924] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [272.438049] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [272.438195] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x3e920000 <7> [272.438325] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [272.438455] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [272.438656] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [272.438924] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [272.439108] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [272.439295] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [272.439527] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [272.439824] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [272.440012] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [272.441314] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.441319] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.447653] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.448270] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.448425] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.448427] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [272.455658] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [272.456269] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [272.456411] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [272.456560] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [272.456741] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [272.456892] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [272.457341] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [272.457456] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [272.457628] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [272.457740] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [272.460306] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [272.460874] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [272.461354] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 <7> [272.462288] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <7> [272.462844] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:HDMI-A-3] generating connector hotplug event <7> [272.463261] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 <7> [272.464105] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:120:DP-2] generating connector hotplug event <6> [272.464166] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [272.465918] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [272.478287] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [272.480123] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input86 <7> [272.480625] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [272.481288] [drm:drm_client_modeset_probe] <7> [272.481324] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [272.481260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [272.481331] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [272.481478] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [272.481489] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [272.481494] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [272.481498] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [272.481482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [272.481678] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [272.481685] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [272.481689] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [272.481693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [272.481764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [272.481860] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [272.481867] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [272.481870] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] <7> [272.481874] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [272.482001] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] status updated from unknown to disconnected <7> [272.482008] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected <7> [272.482011] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] <7> [272.481964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [272.482016] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [272.482160] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] status updated from unknown to disconnected <7> [272.482167] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected <7> [272.482187] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [272.482190] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [272.482193] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [272.482195] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [272.482198] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [272.482200] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [272.482235] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [272.482242] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [272.482255] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [272.482262] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [272.482753] [drm:drm_client_modeset_probe] <7> [272.482651] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [272.482794] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [272.482799] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [272.482885] i915 device info: pciid=0x3e92 rev=0x00 platform=COFFEELAKE (subplatform=0x0) gen=9 <7> [272.482889] i915 device info: graphics version: 9 <7> [272.482891] i915 device info: media version: 9 <7> [272.482893] i915 device info: graphics stepping: <7> [272.482895] i915 device info: media stepping: <7> [272.482897] i915 device info: display stepping: <7> [272.482898] i915 device info: base die stepping: <7> [272.482900] i915 device info: gt: 2 <7> [272.482902] i915 device info: memory-regions: 0x21 <7> [272.482904] i915 device info: page-sizes: 0x11000 <7> [272.482906] i915 device info: platform: COFFEELAKE <7> [272.482908] i915 device info: ppgtt-size: 48 <7> [272.482910] i915 device info: ppgtt-type: 2 <7> [272.482912] i915 device info: dma_mask_size: 39 <7> [272.482914] i915 device info: is_mobile: no <7> [272.482916] i915 device info: is_lp: no <7> [272.482918] i915 device info: require_force_probe: no <7> [272.482920] i915 device info: is_dgfx: no <7> [272.482922] i915 device info: has_64bit_reloc: yes <7> [272.482924] i915 device info: has_64k_pages: no <7> [272.482926] i915 device info: gpu_reset_clobbers_display: no <7> [272.482927] i915 device info: has_reset_engine: yes <7> [272.482929] i915 device info: has_3d_pipeline: yes <7> [272.482931] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [272.482935] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [272.482940] i915 device info: has_4tile: no <7> [272.482943] i915 device info: has_flat_ccs: no <7> [272.482945] i915 device info: has_global_mocs: no <7> [272.482947] i915 device info: has_gmd_id: no <7> [272.482950] i915 device info: has_gt_uc: yes <7> [272.482952] i915 device info: has_heci_pxp: no <7> [272.482954] i915 device info: has_heci_gscfi: no <7> [272.482956] i915 device info: has_guc_deprivilege: no <7> [272.482959] i915 device info: has_l3_ccs_read: no <7> [272.482961] i915 device info: has_l3_dpf: no <7> [272.482963] i915 device info: has_llc: yes <7> [272.482966] i915 device info: has_logical_ring_contexts: yes <7> [272.482968] i915 device info: has_logical_ring_elsq: no <7> [272.482970] i915 device info: has_media_ratio_mode: no <7> [272.482973] i915 device info: has_mslice_steering: no <7> [272.482975] i915 device info: has_oa_bpc_reporting: no <7> [272.482978] i915 device info: has_oa_slice_contrib_limits: no <7> [272.482980] i915 device info: has_oam: no <7> [272.482982] i915 device info: has_one_eu_per_fuse_bit: no <7> [272.482984] i915 device info: has_pxp: no <7> [272.482986] i915 device info: has_rc6: yes <7> [272.482988] i915 device info: has_rc6p: no <7> [272.482991] i915 device info: has_rps: yes <7> [272.482993] i915 device info: has_runtime_pm: yes <7> [272.482995] i915 device info: has_snoop: no <7> [272.482998] i915 device info: has_coherent_ggtt: yes <7> [272.483000] i915 device info: tuning_thread_rr_after_dep: no <7> [272.482939] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [272.483003] i915 device info: unfenced_needs_alignment: no <7> [272.483005] i915 device info: hws_needs_physical: no <7> [272.483007] i915 device info: has_pooled_eu: no <7> [272.483008] i915 device info: rawclk rate: 24000 kHz <7> [272.483010] i915 device info: display version: 9 <7> [272.483012] i915 device info: cursor_needs_physical: no <7> [272.483014] i915 device info: has_cdclk_crawl: no <7> [272.483016] i915 device info: has_cdclk_squash: no <7> [272.483018] i915 device info: has_ddi: yes <7> [272.483020] i915 device info: has_dp_mst: yes <7> [272.483022] i915 device info: has_dsb: no <7> [272.483024] i915 device info: has_fpga_dbg: yes <7> [272.483026] i915 device info: has_gmch: no <7> [272.483028] i915 device info: has_hotplug: yes <7> [272.483030] i915 device info: has_hti: no <7> [272.483032] i915 device info: has_ipc: yes <7> [272.483034] i915 device info: has_overlay: no <7> [272.483035] i915 device info: has_psr: yes <7> [272.483037] i915 device info: has_psr_hw_tracking: yes <7> [272.483039] i915 device info: overlay_needs_physical: no <7> [272.483041] i915 device info: supports_tv: no <7> [272.483043] i915 device info: has_hdcp: yes <7> [272.483045] i915 device info: has_dmc: yes <7> [272.483046] i915 device info: has_dsc: no <7> [272.483048] i915 device info: iommu: disabled <7> [272.483050] i915 device info: available engines: 40403 <7> [272.483053] i915 device info: slice total: 1, mask=0001 <7> [272.483055] i915 device info: subslice total: 3 <7> [272.483057] i915 device info: slice0: 3 subslices, mask=00000007 <7> [272.483059] i915 device info: slice1: 0 subslices, mask=00000000 <7> [272.483061] i915 device info: slice2: 0 subslices, mask=00000000 <7> [272.483063] i915 device info: EU total: 24 <7> [272.483078] i915 device info: EU per subslice: 8 <7> [272.483080] i915 device info: has slice power gating: no <7> [272.483083] i915 device info: has subslice power gating: no <7> [272.483085] i915 device info: has EU power gating: yes <6> [272.483087] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [272.483090] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <7> [272.483108] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <6> [272.483109] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [272.483112] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <6> [272.483114] i915: Performing live selftests with st_random_seed=0x1da3a8c3 st_timeout=500 <6> [272.483117] i915: Running hangcheck <6> [272.483142] i915: Running intel_hangcheck_live_selftests/igt_hang_sanitycheck <7> [272.483117] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [272.483262] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [272.483266] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] <7> [272.483270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [272.483443] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected <7> [272.483447] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] <7> [272.483451] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [272.483607] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected <7> [272.483611] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [272.483614] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [272.483616] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [272.483619] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [272.483621] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [272.483623] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [272.483642] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [272.483648] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [272.483659] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [272.483665] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [272.528733] i915: Running intel_hangcheck_live_selftests/igt_reset_nop <6> [272.532581] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.532618] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.534872] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.535329] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.535480] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.535482] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.539981] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.539984] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.542391] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.542665] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.542814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.542816] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.546049] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.546053] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.548211] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.548442] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.548684] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.548688] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.551698] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.551701] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.554007] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.554235] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.554395] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.554397] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.557177] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.557181] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.559442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.559736] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.559886] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.559888] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.563135] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.563139] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.565496] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.565805] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.565964] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.565966] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.568625] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.568629] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.570907] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.571147] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.571305] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.571307] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.574166] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.574170] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.577587] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.578212] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.578371] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.578373] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.581802] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.581806] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.584167] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.584395] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.584624] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.584627] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.587902] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.587905] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.590211] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.590442] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.590682] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.590686] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.594049] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.594052] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.596455] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.596724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.596882] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.596884] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.600087] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.600091] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.601563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [272.602494] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.602904] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.603117] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.603120] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.606267] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.606271] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.608741] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.608958] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.609108] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.609110] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.612327] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.612331] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.614593] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.614829] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.614983] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.614986] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.618094] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.618097] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.620475] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.620722] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.620871] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.620873] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.623975] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.623978] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.626222] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.626438] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.626600] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.626602] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.629538] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.629542] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.631869] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.632097] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.632246] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.632249] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.635271] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.635275] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.637576] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.637804] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.637962] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.637964] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.640706] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.640709] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.642954] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.643181] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.643339] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.643341] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.646210] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.646214] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.648496] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.648789] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.648947] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.648949] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.651963] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.651967] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.654314] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.654593] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.654752] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.654754] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.657628] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.657632] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.659593] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.659833] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.659982] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.659985] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.662990] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.662994] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.665227] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.665467] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.665631] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.665634] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.668453] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.668457] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.670527] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.670749] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.670898] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.670900] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.673612] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.673616] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.675612] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.675850] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.675999] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.676001] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.678847] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.678850] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.681034] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.681284] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.681443] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.681445] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.684446] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.684450] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.686544] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.686775] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.686923] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.686925] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.689753] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.689756] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.691967] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.692194] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.692352] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.692354] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.695131] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.695135] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.697339] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.697643] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.697798] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.697800] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.700497] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.700500] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.702523] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.702781] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.702928] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.702930] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.705745] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.705748] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.707954] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.708180] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.708337] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.708339] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.711320] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.711324] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.713585] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.713813] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.713970] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.713972] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.716828] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.716832] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.719101] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.719327] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.719484] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.719486] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.722605] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.722609] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.724586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.724804] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.724953] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.724955] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.727714] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.727717] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.729921] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.730146] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.730304] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.730306] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.733076] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.733079] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.735224] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.735450] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.735615] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.735617] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.738348] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.738352] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.740097] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.740338] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.740487] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.740489] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.743398] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.743401] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.745557] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.745783] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.745940] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.745942] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.748642] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.748645] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.750892] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.751110] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.751258] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.751260] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.754241] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.754245] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.756429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.756740] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.756949] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.756952] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.759852] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.759856] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.762167] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.762397] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.762581] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.762584] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.765685] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.765690] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.767948] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.768175] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.768332] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.768334] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.771082] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.771086] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.773223] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.773449] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.773643] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.773646] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.776591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.776596] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.778856] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.779072] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.779220] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.779223] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.782106] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.782109] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.784381] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.784605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.784754] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.784756] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.787648] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.787651] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.789547] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.789770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.789919] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.789921] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.792823] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.792827] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.795095] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.795322] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.795480] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.795483] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.798405] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.798409] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.800570] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.800783] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.800930] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.800932] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.803730] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.803734] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.806025] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.806250] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.806399] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.806401] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.809260] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.809263] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.811567] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.811791] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.811940] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.811942] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.814665] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.814669] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.816931] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.817148] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.817296] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.817299] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.820146] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.820150] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.822419] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.822674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.822824] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.822826] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.825588] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.825609] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.827555] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.827797] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.827947] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.827949] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.830579] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.830583] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.832564] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.832780] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.832929] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.832931] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.835652] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.835656] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.837524] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.837787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.837945] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.837947] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.841056] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.841060] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.843210] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.843437] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.843655] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.843657] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.846386] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.846390] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.848612] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.848841] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.848998] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.849000] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.851665] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.851669] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.853885] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.854111] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.854267] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.854269] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.857115] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.857119] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.859377] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.859655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.859804] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.859806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.862707] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.862711] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.865076] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.865308] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.865483] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.865485] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.868768] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.868772] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.870982] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.871209] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.871367] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.871369] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.874337] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.874340] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.876575] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.876842] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.876991] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.876993] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.880070] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.880074] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.882229] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.882482] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.882704] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.882707] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.885470] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.885474] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.887586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.887814] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.887984] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.887986] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.890966] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.890970] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.893192] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.893421] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.893635] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.893638] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.896458] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.896462] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.898528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.898744] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.898891] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.898894] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.901575] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.901580] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.903596] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.903813] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.903961] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.903963] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.906592] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.906598] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.908600] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.908815] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.908963] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.908965] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.911591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.911594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.913577] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.913806] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.913963] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.913965] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.916535] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.916539] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.918525] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.918752] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.918908] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.918910] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.921615] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.921619] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.923528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.923743] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.923917] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.923920] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.926974] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.926978] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.929223] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.929451] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.929633] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.929636] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.932400] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.932404] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.934558] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.934788] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.934966] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.934969] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.937636] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.937640] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.939637] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.939864] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.940022] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.940024] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.942645] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.942648] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.944585] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.944811] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.944970] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.944972] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.948056] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.948060] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.950258] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.950485] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.950651] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.950654] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.953322] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.953326] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.955548] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.955763] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.955912] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.955914] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.958619] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.958623] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.960848] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.961062] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.961211] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.961213] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.964095] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.964099] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.966380] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.967577] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.968466] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.968478] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.986389] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.986402] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [272.989678] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [272.990412] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [272.991045] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [272.991054] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [272.997881] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [272.997889] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [273.000615] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [273.001069] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [273.001373] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [273.001377] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [273.007094] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [273.007101] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [273.009295] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [273.009692] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [273.009997] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [273.010001] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [273.016046] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [273.016053] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [273.018629] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [273.019010] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [273.019316] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [273.019319] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [273.024085] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [273.024092] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [273.026613] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [273.027001] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [273.027287] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [273.027309] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [273.031950] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [273.031957] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [273.034503] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [273.034908] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [273.035211] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [273.035215] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [273.035927] igt_reset_nop: 85 resets <6> [273.059703] i915: Running intel_hangcheck_live_selftests/igt_reset_nop_engine <6> [273.560934] igt_reset_nop_engine(rcs0): 792 resets <6> [274.061805] igt_reset_nop_engine(bcs0): 1100 resets <6> [274.562808] igt_reset_nop_engine(vcs0): 1085 resets <6> [275.063581] igt_reset_nop_engine(vecs0): 1144 resets <6> [275.081790] i915: Running intel_hangcheck_live_selftests/igt_reset_idle_engine <6> [275.582618] rcs0: Completed 4022 idle resets <6> [276.083581] bcs0: Completed 5633 idle resets <6> [276.584663] vcs0: Completed 5685 idle resets <6> [277.085611] vecs0: Completed 5879 idle resets <6> [277.085642] i915: Running intel_hangcheck_live_selftests/igt_reset_active_engine <6> [277.586798] rcs0: Completed 964 active resets <6> [278.087699] bcs0: Completed 1268 active resets <6> [278.588589] vcs0: Completed 1355 active resets <6> [279.089799] vecs0: Completed 1362 active resets <6> [279.113703] i915: Running intel_hangcheck_live_selftests/igt_reset_fail_engine <6> [279.614732] igt_reset_fail_engine(rcs0): 1733 resets <6> [280.115621] igt_reset_fail_engine(bcs0): 1674 resets <6> [280.616714] igt_reset_fail_engine(vcs0): 1691 resets <6> [281.117898] igt_reset_fail_engine(vecs0): 1721 resets <6> [281.132697] i915: Running intel_hangcheck_live_selftests/igt_reset_engines <6> [281.633533] i915_reset_engine(rcs0:idle): 2330 resets <6> [282.134617] i915_reset_engine(bcs0:idle): 3903 resets <6> [282.635570] i915_reset_engine(vcs0:idle): 4033 resets <6> [283.136641] i915_reset_engine(vecs0:idle): 3883 resets <6> [283.638010] i915_reset_engine(rcs0:active): 933 resets <6> [284.138855] i915_reset_engine(bcs0:active): 1219 resets <6> [284.639713] i915_reset_engine(vcs0:active): 1203 resets <6> [285.140603] i915_reset_engine(vecs0:active): 1236 resets <6> [285.641528] i915_reset_engine(rcs0:others-idle): 4471 resets <6> [286.142519] i915_reset_engine(bcs0:others-idle): 5726 resets <6> [286.644529] i915_reset_engine(vcs0:others-idle): 5858 resets <6> [287.147629] i915_reset_engine(vecs0:others-idle): 5674 resets <6> [287.650704] i915_reset_engine(rcs0:others-active): 727 resets <6> [288.154104] i915_reset_engine(bcs0:others-active): 959 resets <6> [288.656614] i915_reset_engine(vcs0:others-active): 1267 resets <6> [289.162748] i915_reset_engine(vecs0:others-active): 912 resets <6> [289.664648] i915_reset_engine(rcs0:others-priority): 824 resets <6> [290.166833] i915_reset_engine(bcs0:others-priority): 1100 resets <6> [290.668582] i915_reset_engine(vcs0:others-priority): 1039 resets <6> [291.171502] i915_reset_engine(vecs0:others-priority): 1085 resets <6> [291.673777] i915_reset_engine(rcs0:self-priority): 1031 resets <6> [292.174953] i915_reset_engine(bcs0:self-priority): 1216 resets <6> [292.675846] i915_reset_engine(vcs0:self-priority): 1171 resets <6> [293.176785] i915_reset_engine(vecs0:self-priority): 1217 resets <6> [293.205701] i915: Running intel_hangcheck_live_selftests/igt_reset_engines_atomic <7> [293.205710] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [293.207092] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.207096] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.213589] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.213907] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.214065] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.214067] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [293.231822] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [293.232655] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.232660] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.238643] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.239033] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.239219] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.239222] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.263679] i915: Running intel_hangcheck_live_selftests/igt_reset_queue <6> [293.265970] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.265976] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.268499] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.268867] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.269131] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.269151] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.270635] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.270642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.273227] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.273603] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.273872] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.273875] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.274960] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.274965] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.277483] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.277863] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.278168] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.278171] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.279206] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.279212] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.281539] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.281895] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.282145] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.282165] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.283194] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.283200] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.285590] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.285928] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.286178] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.286182] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.287252] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.287257] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.289586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.289923] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.290174] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.290178] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.291259] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.291267] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.293626] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.293976] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.294258] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.294262] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.295171] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.295176] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.297585] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.297900] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.298131] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.298134] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.298940] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.298944] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.301235] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.301566] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.301797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.301800] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.302606] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.302611] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.305026] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.305338] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.305584] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.305587] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.306382] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.306387] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.308604] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.308915] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.309146] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.309149] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.309960] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.309965] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.312229] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.312557] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.312790] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.312793] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.313602] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.313607] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.315946] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.316253] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.316484] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.316487] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.317294] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.317299] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.319571] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.319878] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.320109] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.320112] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.320919] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.320924] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.323232] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.323555] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.323787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.323790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.324599] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.324604] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.326958] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.327269] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.327499] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.327502] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.328310] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.328315] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.330607] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.330916] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.331146] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.331149] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.331960] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.331965] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.334228] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.334552] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.334783] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.334786] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.335585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.335590] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.337907] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.338216] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.338447] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.338451] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.339264] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.339269] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.341568] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.341877] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.342108] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.342111] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.342916] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.342921] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.345237] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.345562] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.345793] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.345796] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.346598] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.346603] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.348943] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.349255] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.349486] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.349489] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.350296] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.350301] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.352552] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.352862] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.353093] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.353096] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.353906] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.353910] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.356233] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.356558] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.356789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.356792] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.357595] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.357600] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.359951] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.360263] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.360493] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.360496] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.361308] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.361313] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.363555] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.363864] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.364095] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.364098] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.364905] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.364910] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.367219] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.367545] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.367777] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.367781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.368583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.368588] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.370535] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.370827] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.371043] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.371046] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.371847] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.371852] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.374227] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.374555] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.374788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.374791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.375596] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.375601] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.377935] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.378244] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.378475] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.378478] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.379287] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.379292] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.381565] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.381875] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.382105] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.382108] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.382918] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.382923] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.385235] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.385561] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.385792] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.385795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.386600] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.386605] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.388958] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.389269] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.389499] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.389503] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.390313] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.390318] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.392582] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.392891] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.393122] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.393125] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.394196] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.394201] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.396553] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.396862] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.397093] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.397096] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.397907] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.397912] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.400219] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.400541] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.400773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.400776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.401587] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.401592] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.403933] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.404244] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.404475] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.404478] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.405284] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.405289] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.407552] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.407860] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.408091] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.408095] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.408915] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.408920] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.411221] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.411544] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.411774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.411777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.412584] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.412589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.414536] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.414828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.415044] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.415047] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.415842] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.415847] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.418220] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.418549] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.418781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.418784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.419595] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.419600] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.421934] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.422243] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.422473] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.422476] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.423281] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.423286] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.425555] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.425865] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.426096] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.426099] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.426913] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.426918] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.429224] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.429550] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.429782] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.429785] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.430584] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.430589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.432535] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.432828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.433044] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.433047] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.433860] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.433865] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.436241] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.436568] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.436801] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.436804] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.437611] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.437616] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.439945] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.440254] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.440486] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.440489] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.441302] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.441307] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.443578] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.443888] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.444120] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.444123] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.444937] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.444941] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.447219] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.447541] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.447773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.447776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.448591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.448596] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.450968] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.451277] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.451508] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.451511] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.452329] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.452334] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.454581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.454889] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.455120] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.455123] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.455933] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.455938] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.458265] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.458606] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.458838] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.458842] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.459649] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.459654] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.461994] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.462287] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.462504] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.462507] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.463321] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.463326] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.465587] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.465895] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.466127] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.466130] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.466953] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.466958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.469232] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.469555] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.469787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.469790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.470609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.470614] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.472962] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.473270] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.473501] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.473504] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.474340] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.474345] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.476603] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.476910] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.477142] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.477145] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.477972] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.477977] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.480235] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.480576] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.480808] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.480812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.481627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.481632] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.483977] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.484287] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.484536] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.484539] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.485344] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.485349] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.487603] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.487911] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.488143] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.488146] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.488957] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.488962] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.491215] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.491539] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.491772] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.491775] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.492582] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.492587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.494918] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.495227] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.495458] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.495462] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.496278] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.496283] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.498584] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.498891] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.499123] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.499126] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.499941] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.499946] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.502232] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.502556] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.502789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.502793] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.503629] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.503634] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.506017] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.506324] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.506572] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.506575] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.507378] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.507383] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.509602] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.509913] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.510145] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.510148] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.510956] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.510961] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.513236] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.513563] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.513795] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.513798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.514618] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.514623] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.519581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 3ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.519970] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.520200] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.520203] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.521009] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.521014] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.523219] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.523542] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.523774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.523777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.524585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.524589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.526967] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.527275] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.527506] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.527509] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.528316] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.528321] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.530591] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.530899] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.531130] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.531133] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.531939] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.531944] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.534219] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.534538] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.534770] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.534773] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.535575] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.535580] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.537928] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.538237] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.538468] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.538471] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.539282] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.539287] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.541600] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.541907] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.542138] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.542141] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.542951] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.542956] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.545294] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.545617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.545848] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.545852] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.546657] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.546662] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.549050] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.549359] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.549609] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.549612] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.550412] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.550417] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.552593] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.552902] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.553132] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.553135] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.553953] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.553958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.556231] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.556557] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.556790] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.556793] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.557597] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.557602] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.559951] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.560260] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.560490] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.560493] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.561307] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.561313] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.563581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.563889] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.564120] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.564124] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.564937] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.564943] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.567228] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.567554] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.567787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.567790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.568597] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.568602] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.570957] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.571265] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.571496] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.571499] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.572307] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.572312] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.574581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.574890] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.575122] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.575125] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.575943] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.575948] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.578299] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.578620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.578852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.578855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.579657] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.579663] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.582043] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.583049] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.583934] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.583948] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.586405] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.586424] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.589618] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.590310] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.590927] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.590935] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.592606] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.592616] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.595589] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.596121] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.596592] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.596599] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.597817] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.597824] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.600604] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.601043] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.601401] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.601406] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.602489] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.602495] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.605024] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.605399] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.605704] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.605708] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.606677] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.606683] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.609137] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.609465] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.609726] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.609730] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.610604] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.610610] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.612988] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.613279] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.613495] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.613498] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.614289] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.614293] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.616603] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.616896] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.617114] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.617117] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.617915] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.617919] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.620297] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.620617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.620834] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.620837] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.621626] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.621630] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.623529] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.623778] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.623957] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.623959] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.624667] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.624671] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.626919] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.627183] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.627375] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.627378] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.628103] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.628107] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.630238] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.630502] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.630709] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.630712] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.631422] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.631426] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.633610] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.633875] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.634067] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.634069] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.634800] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.634804] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.637041] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.638041] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.638903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.638915] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.641407] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.641425] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.644631] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.645346] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.645971] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.645980] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.647647] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.647656] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.650609] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.651144] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.651593] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.651600] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.652850] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.652857] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.655587] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.656026] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.656386] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.656391] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.657472] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.657478] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.659968] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.660342] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.660647] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.660651] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.661654] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.661660] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.664085] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.664396] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.664643] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.664647] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.665502] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.665507] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.667584] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.667858] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.668060] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.668063] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.668864] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.668868] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.671220] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.671513] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.671748] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.671751] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.672500] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.672504] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.674591] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.674840] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.675020] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.675023] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.675771] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.675775] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.678038] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.678278] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.678450] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.678452] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.679123] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.679127] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.681246] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.681485] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.681672] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.681674] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.682478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.682482] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.684563] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.684805] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.684979] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.684981] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.685648] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.685652] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.687904] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.688144] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.688318] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.688320] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.689001] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.689005] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.691247] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.691489] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.691676] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.691679] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.692335] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.692339] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.694554] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.694793] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.694965] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.694967] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.695641] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.695645] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.697611] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.697850] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.698022] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.698025] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.698702] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.698706] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.700924] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.701164] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.701336] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.701339] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.702007] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.702010] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.704280] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.704532] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.704706] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.704708] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.705370] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.705374] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.707597] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.707837] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.708010] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.708012] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.708675] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.708679] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.710618] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.710858] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.711032] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.711034] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.711713] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.711717] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.713531] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.713758] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.713920] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.713922] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.714590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.714594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.716528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.716755] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.716917] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.716920] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.717582] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.717586] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.719528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.719756] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.719917] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.719920] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.720596] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.720600] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.722625] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.722864] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.723038] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.723040] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.723717] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.723720] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.725931] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.726173] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.726345] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.726348] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.727020] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.727024] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.729288] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.729540] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.729713] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.729715] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.730379] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.730383] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.732585] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.732824] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.732997] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.732999] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.733666] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.733670] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.735619] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.735860] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.736032] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.736035] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.736716] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.736720] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.738528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.738758] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.738920] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.738922] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.739591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.739594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.741530] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.741758] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.741919] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.741922] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.742587] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.742591] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.744529] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.744760] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.744921] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.744924] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.745589] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.745593] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.747572] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.747827] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.747989] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.747992] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.748649] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.748653] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.750588] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.750828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.751001] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.751004] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.751668] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.751672] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.753932] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.754165] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.754329] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.754332] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.754991] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.754995] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.757321] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.758385] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.759282] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.759296] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.761943] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.761962] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.765586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.766595] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.767435] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.767447] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.768003] rcs0: Completed 133 queued resets <6> [293.775041] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.775062] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.778443] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.779589] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.780430] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.780442] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.783134] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.783154] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.787146] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.788241] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.789101] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.789113] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.791680] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.791699] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.794694] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.795393] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.796011] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.796019] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.797665] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.797675] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.800601] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.801137] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.801658] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.801683] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.802881] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.802889] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.805645] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.806094] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.806459] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.806464] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.807545] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.807551] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.809983] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.810359] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.810712] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.810738] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.811705] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.811712] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.814203] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.814594] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.814844] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.814848] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.815732] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.815737] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.818245] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.818595] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.818814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.818817] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.819607] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.819612] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.823315] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.823662] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.823855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.823857] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.824593] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.824597] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.826575] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.826840] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.827035] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.827037] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.827780] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.827784] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.830065] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.830328] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.830535] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.830538] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.831273] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.831277] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.833534] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.833799] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.833993] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.833996] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.834728] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.834732] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.837006] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.837269] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.837463] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.837465] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.838231] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.838235] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.840495] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.840767] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.840961] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.840964] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.841740] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.841744] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.844001] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.844264] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.844458] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.844461] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.845207] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.845211] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.847541] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.847808] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.848000] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.848003] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.848734] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.848738] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.851001] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.851265] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.851460] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.851463] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.852209] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.852213] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.854554] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.854817] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.855010] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.855013] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.855741] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.855745] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.858020] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.858285] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.858479] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.858482] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.859228] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.859232] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.861504] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.861815] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.862010] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.862012] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.862765] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.862770] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.865105] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.865369] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.865596] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.865599] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.866337] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.866342] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.868576] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.868842] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.869035] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.869038] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.869774] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.869778] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.872087] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.872352] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.872582] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.872585] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.873337] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.873341] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.875574] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.875839] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.876033] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.876036] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.876767] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.876771] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.879113] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.879379] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.879607] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.879609] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.880336] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.880340] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.882607] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.882873] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.883067] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.883069] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.883820] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.883824] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.886152] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.886417] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.886646] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.886649] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.887375] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.887379] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.889608] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.889872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.890066] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.890069] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.890821] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.890825] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.893119] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.893385] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.893614] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.893617] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.894343] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.894348] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.896588] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.896853] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.897047] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.897049] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.897801] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.897805] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.900134] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.900397] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.900626] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.900629] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.901354] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.901358] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.903607] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.903874] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.904068] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.904071] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.904824] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.904828] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.907128] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.907392] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.907620] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.907623] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.908350] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.908354] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.910605] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.910869] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.911062] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.911065] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.911818] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.911822] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.914119] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.914383] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.914611] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.914614] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.915343] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.915347] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.917672] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.918857] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.919761] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.919773] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.922272] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.922291] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.926204] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.927205] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.928151] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.928164] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.930685] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.930704] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.934235] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.934983] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.935576] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.935585] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.937312] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.937322] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.940281] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.940834] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.941259] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.941284] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.942613] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.942620] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.945303] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.945760] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.946105] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.946110] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.947269] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.947275] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.949561] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.949916] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.950186] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.950206] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.951187] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.951194] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.953626] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.953956] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.954207] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.954210] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.955103] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.955108] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.957632] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.957935] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.958153] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.958156] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.958970] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.958974] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.961595] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.961968] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.962178] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.962180] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.962901] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.962906] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.968636] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.968980] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.969173] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.969176] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.969903] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.969907] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.972215] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.972478] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.972685] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.972687] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.973437] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.973442] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.975636] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.975901] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.976094] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.976097] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.976849] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.976854] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.979194] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.979459] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.979694] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.979697] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.980444] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.980448] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.982616] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.982885] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.983079] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.983082] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.983829] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.983833] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.986111] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.986375] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.986601] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.986604] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.987346] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.987350] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.989612] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.989875] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.990068] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.990071] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.990820] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.990824] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.993065] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.993314] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.993496] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.993498] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.994250] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.994254] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [293.996587] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [293.996859] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [293.997052] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [293.997054] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [293.997832] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [293.997836] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.000119] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.000384] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.000591] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.000594] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.001339] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.001343] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.003583] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.003847] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.004039] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.004042] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.004780] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.004784] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.007203] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.008262] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.009161] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.009174] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.011808] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.011827] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.015568] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.016565] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.017406] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.017417] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.019856] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.019875] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.023053] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.024037] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.024890] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.024902] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.027377] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.027396] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.030671] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.031749] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.032649] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.032661] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.035216] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.035235] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.038625] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.039323] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.039956] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.039965] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.041776] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.041788] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.044614] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.045147] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.045595] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.045628] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.047006] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.047014] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.049601] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.050039] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.050397] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.050402] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.051558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.051565] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.054117] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.054492] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.054795] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.054799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.055786] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.055793] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.058278] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.058632] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.058879] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.058883] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.059758] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.059763] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.062211] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.062505] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.062736] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.062739] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.063537] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.063542] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.066615] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.066986] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.067201] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.067204] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.067983] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.067988] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.073623] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.073996] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.074210] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.074213] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.074997] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.075001] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.077304] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.077605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.077822] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.077825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.078637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.078642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.080960] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.081252] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.081469] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.081472] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.082288] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.082292] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.084570] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.084860] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.085077] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.085080] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.085897] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.085901] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.088287] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.088595] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.088813] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.088816] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.089629] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.089633] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.091934] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.092226] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.092442] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.092445] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.093257] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.093262] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.095581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.095873] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.096091] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.096094] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.096912] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.096917] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.099282] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.099590] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.099806] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.099809] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.100607] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.100611] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.102532] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.102811] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.103014] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.103017] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.103938] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.103942] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.106283] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.106591] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.106807] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.106810] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.107627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.107631] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.109926] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.110217] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.110434] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.110437] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.111240] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.111245] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.113605] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.113895] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.114112] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.114115] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.114921] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.114926] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.117274] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.117582] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.117800] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.117803] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.118616] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.118620] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.120933] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.121226] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.121443] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.121446] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.122258] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.122263] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.124603] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.124897] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.125114] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.125117] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.125920] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.125925] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.128302] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.128607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.128824] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.128827] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.129639] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.129644] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.132037] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.132329] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.132559] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.132562] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.133356] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.133361] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.135609] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.135899] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.136115] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.136118] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.136942] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.136946] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.139275] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.139584] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.139803] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.139806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.140609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.140614] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.142580] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.142856] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.143060] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.143063] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.143865] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.143869] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.146283] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.146589] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.146806] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.146809] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.147628] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.147633] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.149949] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.150240] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.150457] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.150460] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.151266] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.151270] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.153568] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.153860] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.154077] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.154080] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.154885] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.154889] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.157283] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.157593] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.157810] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.157813] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.158626] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.158630] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.160944] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.161239] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.161456] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.161458] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.162277] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.162282] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.164581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.164872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.165088] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.165090] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.165908] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.165913] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.168293] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.168599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.168816] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.168819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.169614] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.169618] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.171917] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.172209] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.172426] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.172428] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.173241] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.173246] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.175581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.175872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.176089] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.176092] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.176918] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.176922] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.179280] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.179585] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.179802] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.179805] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.180609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.180613] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.182911] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.183201] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.183419] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.183421] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.184220] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.184224] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.186606] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.186897] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.187112] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.187115] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.187934] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.187939] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.190288] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.190599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.190816] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.190819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.191628] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.191633] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.193958] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.194250] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.194466] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.194469] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.195275] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.195280] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.197580] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.197871] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.198087] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.198090] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.198906] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.198910] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.201300] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.201618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.201835] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.201838] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.202653] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.202657] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.205045] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.205339] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.205569] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.205572] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.206366] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.206371] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.208606] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.208897] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.209114] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.209117] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.209957] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.209962] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.212297] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.212605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.212823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.212826] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.213627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.213632] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.215928] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.216220] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.216437] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.216440] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.217237] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.217242] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.219579] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.219870] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.220087] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.220090] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.220898] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.220903] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.223265] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.223570] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.223788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.223791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.224601] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.224605] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.226535] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.226810] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.227013] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.227016] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.227827] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.227832] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.230178] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.230469] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.230703] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.230706] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.231498] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.231503] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.233581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.233872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.234088] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.234091] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.234938] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.234943] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.237277] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.237582] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.237799] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.237802] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.238597] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.238601] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.240906] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.241197] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.241413] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.241416] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.242231] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.242236] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.244608] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.244898] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.245115] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.245118] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.245936] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.245941] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.248286] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.248607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.248825] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.248828] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.249637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.249642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.251978] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.252273] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.252490] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.252493] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.253321] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.253328] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.255580] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.255871] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.256088] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.256091] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.256907] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.256912] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.259312] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.259615] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.259832] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.259835] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.260648] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.260653] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.263020] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.263312] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.263542] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.263545] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.264331] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.264336] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.266610] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.266901] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.267116] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.267119] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.267931] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.267936] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.270302] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.270606] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.270824] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.270827] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.271048] bcs0: Completed 121 queued resets <6> [294.272817] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.272823] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.275233] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.275540] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.275759] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.275762] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.276556] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.276561] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.278898] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.279192] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.279409] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.279412] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.280219] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.280223] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.282664] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.283724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.284625] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.284637] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.287090] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.287109] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.291023] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.292069] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.293006] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.293019] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.295487] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.295506] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.299252] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.300255] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.301113] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.301126] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.303589] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.303608] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.307501] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.308606] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.309478] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.309490] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.311994] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.312013] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.315202] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8000F0EC, count = 0, ret = 0 <7> [294.316263] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.317116] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.317124] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.318912] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.318925] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.322123] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.322689] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.323137] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.323143] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.324508] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.324534] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.327488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.327961] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.328325] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.328330] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.329457] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.329464] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.332228] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.332647] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.332954] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.332958] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.333977] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.333984] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.337584] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.337996] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.338243] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.338247] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.339124] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.339130] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.344621] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.345032] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.345278] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.345281] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.346154] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.346159] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.348602] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.348943] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.349178] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.349181] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.350071] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.350076] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.352482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.352822] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.353071] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.353075] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.353946] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.353951] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.356279] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.356621] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.356870] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.356873] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.357752] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.357757] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.360197] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.360541] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.360791] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.360794] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.361661] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.361666] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.364111] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.364443] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.364709] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.364712] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.365580] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.365585] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.368030] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.368361] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.368624] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.368627] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.369490] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.369496] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.371940] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.372269] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.372533] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.372537] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.373402] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.373407] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.375605] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.375936] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.376183] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.376187] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.377076] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.377081] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.379549] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.379879] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.380129] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.380133] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.381033] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.381038] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.383469] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.383812] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.384062] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.384065] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.384986] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.384991] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.387377] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.387717] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.387967] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.387970] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.388848] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.388854] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.391279] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.391623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.391873] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.391876] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.392742] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.392747] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.395186] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.395530] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.395779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.395782] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.396662] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.396667] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.399085] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.399399] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.399650] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.399653] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.400511] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.400525] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.402890] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.403202] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.403435] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.403438] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.404303] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.404309] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.406599] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.406929] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.407177] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.407181] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.408070] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.408075] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.410482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.410824] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.411076] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.411079] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.411973] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.411979] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.414381] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.414731] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.414979] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.414983] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.415866] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.415871] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.419621] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.420033] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.420280] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.420283] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.421182] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.421187] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.423605] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.423936] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.424185] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.424188] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.425085] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.425091] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.427528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.427861] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.428109] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.428113] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.429003] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.429008] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.431443] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.431794] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.432042] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.432045] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.432935] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.432940] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.436621] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.437032] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.437278] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.437282] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.438160] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.438166] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.440604] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.440934] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.441182] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.441186] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.442077] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.442082] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.444501] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.444833] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.445069] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.445072] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.445960] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.445965] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.448226] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.448580] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.448815] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.448819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.449697] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.449702] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.453534] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.453947] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.454193] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.454197] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.455084] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.455090] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.457505] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.457846] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.458096] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.458099] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.458993] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.458998] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.461411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.461750] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.461983] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.461987] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.462895] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.462900] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.465324] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.465716] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.465966] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.465969] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.466844] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.466850] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.470623] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.471035] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.471281] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.471285] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.472164] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.472170] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.474588] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.474919] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.475168] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.475171] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.476061] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.476066] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.478500] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.478841] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.479091] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.479094] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.479984] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.479990] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.482402] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.482754] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.483006] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.483009] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.483892] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.483897] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.487623] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.488034] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.488281] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.488284] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.489161] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.489167] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.491600] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.491930] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.492178] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.492182] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.493072] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.493077] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.495497] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.495830] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.496063] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.496067] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.496947] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.496953] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.499250] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.499587] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.499821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.499825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.500697] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.500702] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.503318] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.503770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.504016] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.504020] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.504910] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.504915] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.510623] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.511034] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.511279] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.511282] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.512170] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.512175] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.514597] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.514927] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.515177] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.515180] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.516065] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.516070] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.518513] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.518854] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.519103] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.519106] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.520030] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.520036] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.522477] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.522820] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.523070] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.523074] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.523957] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.523962] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.526282] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.526621] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.526871] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.526874] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.527744] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.527749] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.530171] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.530502] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.530767] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.530771] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.531637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.531642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.534037] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.534350] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.534595] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.534599] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.535456] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.535461] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.537603] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.537931] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.538180] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.538183] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.539037] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.539042] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.541471] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.541814] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.542064] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.542068] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.542921] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.542927] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.545221] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.545564] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.545814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.545817] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.546668] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.546674] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.549057] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.549377] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.549624] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.549628] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.550478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.550483] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.552592] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.552921] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.553170] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.553173] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.554025] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.554031] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.556458] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.556802] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.557051] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.557054] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.557910] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.557915] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.560222] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.560568] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.560817] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.560821] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.561676] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.561682] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.564037] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.564351] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.564594] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.564598] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.565438] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.565443] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.567590] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.567962] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.568211] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.568214] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.569082] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.569088] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.574626] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.575036] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.575281] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.575285] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.576130] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.576136] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.578605] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.578934] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.579181] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.579185] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.580076] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.580082] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.582491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.582831] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.583080] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.583084] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.583954] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.583960] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.586284] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.586624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.586873] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.586876] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.587723] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.587728] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.590150] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.590480] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.590747] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.590751] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.591608] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.591614] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.594009] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.594322] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.594567] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.594571] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.595429] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.595434] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.597604] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.597933] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.598182] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.598185] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.599041] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.599047] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.601482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.601824] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.602074] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.602077] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.602952] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.602958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.605223] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.605569] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.605818] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.605822] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.606676] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.606682] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.609103] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.609438] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.609700] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.609703] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.610585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.610590] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.614430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.614849] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.615096] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.615099] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.615962] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.615967] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.618227] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.618573] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.618823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.618826] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.619674] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.619679] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.622121] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.622452] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.622716] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.622720] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.623578] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.623584] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.626018] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.626348] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.626611] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.626614] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.627474] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.627479] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.629602] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.629932] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.630181] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.630184] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.631044] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.631049] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.633479] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.633821] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.634069] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.634072] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.634929] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.634934] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.637232] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.637575] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.637824] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.637828] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.638678] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.638684] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.641117] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.641448] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.641710] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.641714] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.642584] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.642589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.645032] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.645360] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.645634] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.645637] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.646484] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.646490] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.648586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.648916] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.649164] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.649168] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.650038] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.650043] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.652474] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.652818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.653066] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.653070] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.653921] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.653926] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.656231] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.656570] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.656821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.656824] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.657683] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.657688] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.660121] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.660449] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.660712] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.660716] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.661581] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.661587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.664034] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.664363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.664627] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.664630] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.665478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.665484] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.667591] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.667919] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.668167] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.668170] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.669022] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.669027] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.671473] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.671815] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.672063] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.672066] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.672935] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.672940] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.675230] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.675572] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.675822] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.675825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.676674] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.676680] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.679063] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.679373] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.679618] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.679621] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.680476] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.680481] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.682590] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.682919] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.683166] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.683170] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.684078] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.684084] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.686487] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.686825] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.687074] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.687078] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.687952] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.687957] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.690287] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.690628] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.690877] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.690881] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.691741] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.691746] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.694186] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.694515] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.694781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.694784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.695663] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.695668] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.698116] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.698445] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.698706] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.698710] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.699566] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.699571] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.701984] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.702312] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.702575] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.702579] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.703443] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.703448] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.705586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.705917] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.706166] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.706169] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.707068] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.707073] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.709472] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.709814] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.710063] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.710067] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.710921] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.710926] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.713296] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.713636] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.713885] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.713889] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.714748] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.714753] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.717197] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.717540] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.717792] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.717795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.718653] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.718659] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.721079] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.721408] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.721673] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.721677] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.722541] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.722546] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.724585] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.724912] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.725159] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.725162] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.726023] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.726029] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.728467] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.728810] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.729059] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.729063] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.729916] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.729922] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.732280] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.732620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.732869] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.732872] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.733736] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.733741] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.736177] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.736508] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.736781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.736784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.737650] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.737656] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.740077] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.740390] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.740643] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.740647] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.741542] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.741548] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.743978] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.744307] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.744578] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.744582] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.745464] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.745469] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.747594] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.747921] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.748168] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.748172] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.749076] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.749081] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.751489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.751829] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.752079] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.752083] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.752980] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.752985] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.755394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.755733] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.755983] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.755987] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.756873] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.756878] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.759284] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.759623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.759873] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.759877] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.760738] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.760743] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.763180] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.763510] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.763780] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.763783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.764637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.764642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.767076] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.767405] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.767676] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.767680] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.768558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.768563] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.770957] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.771286] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.771558] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.771562] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.771769] vcs0: Completed 119 queued resets <6> [294.773413] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.773419] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.775595] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.775925] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.776173] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.776176] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.777049] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.777055] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.779498] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.779872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.780123] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.780126] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.780983] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.780989] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.783389] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.783686] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.783890] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.783892] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.784665] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.784669] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.787074] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 400MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.788226] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.789221] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.789234] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.791811] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.791829] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.795127] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.795876] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.796434] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.796442] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.797940] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.797950] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.800639] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.801178] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.801614] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.801621] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.802808] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.802815] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.805612] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.806074] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.806403] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.806407] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.807469] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.807475] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.810026] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.810422] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.810730] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.810734] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.811675] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.811681] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.817626] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.818022] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.818253] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.818257] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.819113] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.819118] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.821575] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.821888] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.822120] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.822123] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.822998] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.823003] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.825444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.825786] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.826036] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.826039] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.826895] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.826900] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.829293] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.829633] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.829881] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.829885] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.830754] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.830760] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.833183] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.833514] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.833782] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.833785] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.834646] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.834651] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.837048] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.837361] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.837606] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.837609] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.838478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.838484] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.840588] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.840918] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.841165] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.841168] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.842020] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.842025] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.844450] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.844793] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.845042] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.845046] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.845911] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.845916] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.848228] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.848576] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.848811] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.848814] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.849666] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.849671] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.852123] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.852452] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.852723] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.852727] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.853590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.853595] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.856023] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.856354] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.856631] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.856635] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.857486] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.857491] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.861346] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.861773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.862006] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.862009] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.862889] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.862894] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.865292] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.865634] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.865868] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.865871] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.866731] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.866736] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.869166] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.869496] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.869771] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.869775] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.870636] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.870641] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.873092] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.873422] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.873695] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.873698] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.874558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.874564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.878348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.878777] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.879010] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.879013] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.879864] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.879869] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.885625] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.886020] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.886251] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.886255] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.887105] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.887111] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.889540] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.889854] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.890088] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.890091] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.890950] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.890955] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.893230] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.893572] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.893822] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.893826] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.894672] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.894678] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.897126] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.897454] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.897739] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.897743] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.898626] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.898632] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.900610] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.900939] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.901188] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.901191] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.902044] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.902050] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.904494] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.904836] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.905086] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.905089] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.905944] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.905949] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.908238] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.908588] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.908824] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.908828] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.909675] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.909680] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.912111] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.912439] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.912708] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.912712] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.913571] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.913576] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.915957] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.916286] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.916584] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.916588] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.917441] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.917447] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.919614] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.919943] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.920192] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.920196] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.921048] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.921053] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.923455] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.923814] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.924064] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.924067] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.924925] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.924930] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.927242] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.927604] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.927839] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.927842] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.928688] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.928694] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.931123] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.931452] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.931747] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.931751] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.932609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.932614] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.934993] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.935323] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.935593] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.935597] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.936440] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.936445] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.938588] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.938916] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.939166] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.939169] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.940041] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.940046] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.942466] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.942823] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.943071] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.943075] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.943945] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.943950] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.946278] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.946617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.946867] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.946870] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.947731] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.947737] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.950140] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.950469] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.950768] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.950772] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.951627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.951633] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.954034] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.954363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.954633] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.954636] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.955500] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.955505] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.957930] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.958259] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.958508] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.958511] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.959386] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.959391] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.961577] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.961888] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.962119] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.962122] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.962994] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.962999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.965455] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.965797] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.966047] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.966050] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.966934] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.966939] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.969231] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.969581] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.969816] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.969819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.970678] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.970683] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.973102] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.973430] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.973715] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.973718] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.974574] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.974579] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.977036] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.977365] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.977638] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.977642] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.978486] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.978492] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.980982] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.981312] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.981599] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.981603] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.982446] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.982451] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.984617] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.984956] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.985202] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.985206] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.986059] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.986064] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.988490] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.988864] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.989114] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.989118] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.989967] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.989972] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.995617] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.996029] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [294.996276] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [294.996279] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [294.997149] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [294.997154] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [294.999596] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [294.999924] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.000172] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.000176] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.001031] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.001036] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.003481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.003824] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.004074] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.004077] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.004958] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.004964] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.007227] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.007576] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.007811] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.007815] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.008664] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.008670] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.011146] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.011476] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.011774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.011778] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.012638] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.012643] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.015071] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.015401] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.015684] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.015687] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.016550] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.016555] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.018962] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.019302] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.019574] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.019578] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.020427] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.020433] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.023016] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.023347] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.023630] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.023634] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.024495] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.024501] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.026598] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.026928] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.027176] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.027179] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.028033] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.028038] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.033617] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.034027] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.034272] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.034276] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.035131] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.035137] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.037615] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.037944] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.038193] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.038196] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.039050] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.039056] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.041470] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.041846] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.042096] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.042099] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.043004] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.043009] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.045373] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.045743] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.045978] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.045981] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.046854] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.046859] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.049291] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.049655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.049890] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.049893] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.050759] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.050764] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.056614] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.057025] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.057273] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.057276] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.058142] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.058148] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.060592] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.060920] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.061167] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.061171] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.062031] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.062037] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.064481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.064836] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.065085] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.065089] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.065963] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.065968] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.068265] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.068614] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.068848] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.068852] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.069698] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.069704] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.072140] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.072470] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.072766] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.072770] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.073622] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.073627] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.076017] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.076329] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.076594] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.076598] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.077434] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.077439] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.079928] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.080262] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.080510] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.080513] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.081399] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.081404] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.083591] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.083964] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.084212] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.084215] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.085119] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.085125] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.090587] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.090995] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.091241] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.091245] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.092144] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.092149] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.094600] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.094927] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.095175] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.095179] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.096079] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.096085] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.098506] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.098846] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.099094] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.099098] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.099998] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.100004] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.102420] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.102760] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.103009] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.103013] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.103924] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.103930] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.106272] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.106645] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.106880] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.106883] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.107773] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.107778] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.110242] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.110620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.110856] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.110859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.111744] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.111749] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.114195] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.114545] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.114795] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.114799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.115682] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.115687] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.119536] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.119947] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.120192] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.120196] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.121094] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.121099] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.123533] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.123861] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.124108] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.124112] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.125022] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.125027] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.127472] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.127811] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.128060] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.128064] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.128953] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.128959] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.131228] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.131590] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.131826] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.131830] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.132725] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.132730] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.135182] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.135512] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.135784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.135789] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.136670] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.136675] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.139113] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.139441] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.139711] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.139716] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.140661] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.140667] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.143121] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.143452] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.143711] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.143715] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.144681] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.144687] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.147148] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.147479] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.147738] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.147741] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.148718] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.148723] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.151241] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.151595] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.151831] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.151834] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.152809] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.152814] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.155294] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.155641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.155876] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.155879] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.156845] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.156851] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.159303] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.159646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.159882] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.159885] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.160856] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.160862] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.163286] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.163631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.163865] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.163868] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.164841] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.164847] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.167297] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.167652] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.167887] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.167890] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.168912] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.168918] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.171292] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.171637] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.171873] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.171876] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.172858] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.172863] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.175290] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.175632] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.175868] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.175871] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.176846] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.176851] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.179303] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.179648] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.179882] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.179886] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.180851] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.180856] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.183284] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.183641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.183875] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.183878] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.184844] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.184849] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.187245] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.187601] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.187836] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.187839] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.188803] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.188809] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.191306] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.191655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.191889] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.191892] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.192871] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.192876] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.195245] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.195599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.195834] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.195837] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.196804] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.196810] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.199306] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.199665] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.199900] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.199903] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.200881] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.200886] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.203288] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.203653] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.203887] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.203891] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.204866] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.204871] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.208588] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.208985] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.209217] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.209220] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.210237] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.210243] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.212586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.212901] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.213137] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.213140] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.214117] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.214122] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.216581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.216896] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.217131] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.217135] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.218112] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.218117] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.220590] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.220923] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.221158] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.221161] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.222153] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.222159] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.224628] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 400MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.224991] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.225227] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.225230] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.226209] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.226215] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.231621] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.232019] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.232252] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.232256] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.233251] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.233256] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.235603] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.235917] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.236152] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.236155] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.237151] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.237156] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.239603] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.239917] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.240151] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.240155] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.241158] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.241163] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.243587] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.243903] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.244139] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.244142] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.245126] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.245131] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.247595] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.247910] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.248179] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.248183] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.249168] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.249173] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.251595] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.251911] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.252146] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.252149] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.253124] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.253130] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.255588] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.255901] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.256135] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.256139] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.257124] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.257130] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.259575] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.259891] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.260125] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.260128] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.261111] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.261116] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.263532] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.263845] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.264079] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.264082] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.265059] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.265065] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.267485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.267818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.268054] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.268057] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.269034] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.269040] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.271473] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.271807] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.272042] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.272045] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.273026] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.273032] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.275441] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.275782] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.276017] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.276021] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.276229] vecs0: Completed 120 queued resets <6> [295.302697] i915: Running intel_hangcheck_live_selftests/igt_reset_wait <6> [295.304769] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.304775] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.307278] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.307680] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.307960] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.307980] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.340789] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_ggtt <6> [295.349387] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.349407] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.353476] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.354598] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.355470] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.355483] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.385796] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_ppgtt <6> [295.397120] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.397140] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.400347] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.401351] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.402297] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.402310] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.434781] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence <6> [295.442334] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [295.442355] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [295.446323] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [295.447490] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [295.448402] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [295.448415] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [295.480792] i915: Running intel_hangcheck_live_selftests/igt_handle_error <7> [295.520782] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [295.521983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [295.522862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [295.523720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [295.524565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [295.570809] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [295.619181] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [295.673936] i915: probe of 0000:00:02.0 failed with error -25 <6> [295.842406] [IGT] i915_selftest: finished subtest hangcheck, SUCCESS

<6> [271.673820] [IGT] i915_selftest: starting dynamic subtest hangcheck

<5> [271.764052] Setting dangerous option enable_guc - tainting kernel

<5> [271.764058] Setting dangerous option live_selftests - tainting kernel

<7> [271.793557] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [271.793723] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [271.793860] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [271.793869] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP)

<7> [271.793994] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [271.794165] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [271.794277] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [271.794923] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [271.795083] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [271.795237] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [271.795390] i915 0000:00:02.0: vgaarb: deactivate vga console

<7> [271.795570] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047

<7> [271.795732] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [271.795987] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8c90a018

<7> [271.796134] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [271.796261] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [271.796385] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [271.796509] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [271.800653] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [271.800791] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [271.800916] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [271.801040] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [271.801165] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [271.801262] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [271.801355] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [271.801497] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [271.801686] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [271.801909] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [271.802052] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [271.802194] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [271.802336] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [271.802477] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [271.803177] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [271.803334] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209

<7> [271.803473] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [271.803724] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [271.803915] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [271.804053] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [271.804260] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [271.804396] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [271.804565] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [271.804793] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [271.804930] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [271.805068] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [271.805202] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [271.805392] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [271.805660] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [271.805909] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [271.806105] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [271.806298] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [271.806495] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [271.806783] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [271.806986] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [271.807120] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [271.807253] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [271.807385] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9

<7> [271.807548] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [271.807757] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 10

<7> [271.807907] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [271.808093] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 10

<7> [271.808226] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [271.808358] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [271.808491] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [271.808698] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [271.808917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [271.809064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [271.809315] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [271.809512] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [271.809750] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [271.810013] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [271.810310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [271.810447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [271.810610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [271.810809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [271.810986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [271.811120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [271.811253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [271.811387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [271.811589] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [271.812553] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [271.813115] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [271.813493] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [271.813757] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [271.813956] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [271.814120] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [271.814264] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [271.814388] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [271.814547] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [271.814718] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [271.814843] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [271.814968] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [271.816000] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [271.816975] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [271.817256] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [271.817451] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [271.820346] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [271.820588] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [271.820816] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [271.820993] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [271.821141] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [271.821275] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [271.821408] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [271.821595] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [271.821800] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [271.821933] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [271.822065] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [271.822230] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [271.822415] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [271.822611] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [271.822802] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [271.822922] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [271.823042] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [271.823207] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [271.823444] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [271.823704] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [271.823990] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [271.824175] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [271.824389] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [271.824666] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [272.044527] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.055524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.066524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.077524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.088526] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.099524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.110524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.121524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.132526] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.143524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.154524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.165525] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.176527] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.187524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.198523] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.209523] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.220527] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.231525] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.242525] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.253524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.264527] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.275524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.286524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.297525] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.308526] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.319525] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.330525] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.341524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.352526] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.363524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.374524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.385524] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [272.385701] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [272.385713] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [272.385773] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [272.385939] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [272.386121] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [272.386249] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [272.386592] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [272.386789] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [272.387098] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI D/PHY D] Using AUX CH D (VBT)

<7> [272.387367] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI D/PHY D]

<7> [272.387967] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [272.388155] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D/PHY D]

<7> [272.388325] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:108:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [272.388684] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:119:DDI E/PHY E] Using AUX CH A (VBT)

<7> [272.388891] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:119:DDI E/PHY E]

<7> [272.389157] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [272.389644] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [272.389929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [272.390139] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [272.390325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [272.390543] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [272.390804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [272.390991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [272.391176] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [272.391363] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [272.391623] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [272.391881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [272.392066] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [272.392255] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [272.392443] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [272.392730] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [272.392978] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST A] hw state readout: disabled, pipe A

<7> [272.393160] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST B] hw state readout: disabled, pipe B

<7> [272.393337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST C] hw state readout: disabled, pipe C

<7> [272.393571] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [272.393811] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [272.394027] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [272.394220] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [272.394416] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [272.394753] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [272.394985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [272.395182] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [272.395375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:HDMI-A-3] hw state readout: disabled

<7> [272.395655] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:120:DP-2] hw state readout: disabled

<7> [272.395906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [272.396084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [272.396264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [272.396440] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [272.396715] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [272.396982] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [272.397159] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [272.397336] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [272.397576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [272.397810] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [272.397990] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [272.398169] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [272.398411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [272.398681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [272.398953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [272.399140] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [272.399324] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [272.399504] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [272.399766] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [272.404148] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [272.404328] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [272.404487] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [272.404735] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [272.404970] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global

<7> [272.406348] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [272.406566] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [272.406780] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [272.413922] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [272.414116] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [272.414266] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [272.437404] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [272.437635] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [272.437797] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [272.437924] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [272.438049] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [272.438195] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x3e920000

<7> [272.438325] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [272.438455] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [272.438656] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [272.438924] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [272.439108] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [272.439295] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [272.439527] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [272.439824] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [272.440012] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [272.441314] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.441319] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.447653] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.448270] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.448425] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.448427] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [272.455658] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [272.456269] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [272.456411] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [272.456560] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [272.456741] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [272.456892] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [272.457341] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [272.457456] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [272.457628] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [272.457740] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [272.460306] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [272.460874] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [272.461354] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1

<7> [272.462288] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<7> [272.462844] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:HDMI-A-3] generating connector hotplug event

<7> [272.463261] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2

<7> [272.464105] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:120:DP-2] generating connector hotplug event

<6> [272.464166] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [272.465918] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [272.478287] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [272.480123] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input86

<7> [272.480625] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [272.481288] [drm:drm_client_modeset_probe]

<7> [272.481324] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [272.481260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [272.481331] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [272.481478] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [272.481489] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [272.481494] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [272.481498] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [272.481482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [272.481678] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [272.481685] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [272.481689] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [272.481693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [272.481764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [272.481860] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [272.481867] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [272.481870] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3]

<7> [272.481874] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [272.482001] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] status updated from unknown to disconnected

<7> [272.482008] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [272.482011] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2]

<7> [272.481964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [272.482016] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [272.482160] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] status updated from unknown to disconnected

<7> [272.482167] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected

<7> [272.482187] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [272.482190] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [272.482193] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [272.482195] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [272.482198] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [272.482200] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [272.482235] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [272.482242] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [272.482255] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [272.482262] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [272.482753] [drm:drm_client_modeset_probe]

<7> [272.482651] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [272.482794] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [272.482799] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [272.482885] i915 device info: pciid=0x3e92 rev=0x00 platform=COFFEELAKE (subplatform=0x0) gen=9

<7> [272.482889] i915 device info: graphics version: 9

<7> [272.482891] i915 device info: media version: 9

<7> [272.482893] i915 device info: graphics stepping: **

<7> [272.482895] i915 device info: media stepping: **

<7> [272.482897] i915 device info: display stepping: **

<7> [272.482898] i915 device info: base die stepping: **

<7> [272.482900] i915 device info: gt: 2

<7> [272.482902] i915 device info: memory-regions: 0x21

<7> [272.482904] i915 device info: page-sizes: 0x11000

<7> [272.482906] i915 device info: platform: COFFEELAKE

<7> [272.482908] i915 device info: ppgtt-size: 48

<7> [272.482910] i915 device info: ppgtt-type: 2

<7> [272.482912] i915 device info: dma_mask_size: 39

<7> [272.482914] i915 device info: is_mobile: no

<7> [272.482916] i915 device info: is_lp: no

<7> [272.482918] i915 device info: require_force_probe: no

<7> [272.482920] i915 device info: is_dgfx: no

<7> [272.482922] i915 device info: has_64bit_reloc: yes

<7> [272.482924] i915 device info: has_64k_pages: no

<7> [272.482926] i915 device info: gpu_reset_clobbers_display: no

<7> [272.482927] i915 device info: has_reset_engine: yes

<7> [272.482929] i915 device info: has_3d_pipeline: yes

<7> [272.482931] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [272.482935] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [272.482940] i915 device info: has_4tile: no

<7> [272.482943] i915 device info: has_flat_ccs: no

<7> [272.482945] i915 device info: has_global_mocs: no

<7> [272.482947] i915 device info: has_gmd_id: no

<7> [272.482950] i915 device info: has_gt_uc: yes

<7> [272.482952] i915 device info: has_heci_pxp: no

<7> [272.482954] i915 device info: has_heci_gscfi: no

<7> [272.482956] i915 device info: has_guc_deprivilege: no

<7> [272.482959] i915 device info: has_l3_ccs_read: no

<7> [272.482961] i915 device info: has_l3_dpf: no

<7> [272.482963] i915 device info: has_llc: yes

<7> [272.482966] i915 device info: has_logical_ring_contexts: yes

<7> [272.482968] i915 device info: has_logical_ring_elsq: no

<7> [272.482970] i915 device info: has_media_ratio_mode: no

<7> [272.482973] i915 device info: has_mslice_steering: no

<7> [272.482975] i915 device info: has_oa_bpc_reporting: no

<7> [272.482978] i915 device info: has_oa_slice_contrib_limits: no

<7> [272.482980] i915 device info: has_oam: no

<7> [272.482982] i915 device info: has_one_eu_per_fuse_bit: no

<7> [272.482984] i915 device info: has_pxp: no

<7> [272.482986] i915 device info: has_rc6: yes

<7> [272.482988] i915 device info: has_rc6p: no

<7> [272.482991] i915 device info: has_rps: yes

<7> [272.482993] i915 device info: has_runtime_pm: yes

<7> [272.482995] i915 device info: has_snoop: no

<7> [272.482998] i915 device info: has_coherent_ggtt: yes

<7> [272.483000] i915 device info: tuning_thread_rr_after_dep: no

<7> [272.482939] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [272.483003] i915 device info: unfenced_needs_alignment: no

<7> [272.483005] i915 device info: hws_needs_physical: no

<7> [272.483007] i915 device info: has_pooled_eu: no

<7> [272.483008] i915 device info: rawclk rate: 24000 kHz

<7> [272.483010] i915 device info: display version: 9

<7> [272.483012] i915 device info: cursor_needs_physical: no

<7> [272.483014] i915 device info: has_cdclk_crawl: no

<7> [272.483016] i915 device info: has_cdclk_squash: no

<7> [272.483018] i915 device info: has_ddi: yes

<7> [272.483020] i915 device info: has_dp_mst: yes

<7> [272.483022] i915 device info: has_dsb: no

<7> [272.483024] i915 device info: has_fpga_dbg: yes

<7> [272.483026] i915 device info: has_gmch: no

<7> [272.483028] i915 device info: has_hotplug: yes

<7> [272.483030] i915 device info: has_hti: no

<7> [272.483032] i915 device info: has_ipc: yes

<7> [272.483034] i915 device info: has_overlay: no

<7> [272.483035] i915 device info: has_psr: yes

<7> [272.483037] i915 device info: has_psr_hw_tracking: yes

<7> [272.483039] i915 device info: overlay_needs_physical: no

<7> [272.483041] i915 device info: supports_tv: no

<7> [272.483043] i915 device info: has_hdcp: yes

<7> [272.483045] i915 device info: has_dmc: yes

<7> [272.483046] i915 device info: has_dsc: no

<7> [272.483048] i915 device info: iommu: disabled

<7> [272.483050] i915 device info: available engines: 40403

<7> [272.483053] i915 device info: slice total: 1, mask=0001

<7> [272.483055] i915 device info: subslice total: 3

<7> [272.483057] i915 device info: slice0: 3 subslices, mask=00000007

<7> [272.483059] i915 device info: slice1: 0 subslices, mask=00000000

<7> [272.483061] i915 device info: slice2: 0 subslices, mask=00000000

<7> [272.483063] i915 device info: EU total: 24

<7> [272.483078] i915 device info: EU per subslice: 8

<7> [272.483080] i915 device info: has slice power gating: no

<7> [272.483083] i915 device info: has subslice power gating: no

<7> [272.483085] i915 device info: has EU power gating: yes

<6> [272.483087] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [272.483090] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<7> [272.483108] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<6> [272.483109] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [272.483112] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<6> [272.483114] i915: Performing live selftests with st_random_seed=0x1da3a8c3 st_timeout=500

<6> [272.483117] i915: Running hangcheck

<6> [272.483142] i915: Running intel_hangcheck_live_selftests/igt_hang_sanitycheck

<7> [272.483117] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [272.483262] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [272.483266] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3]

<7> [272.483270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [272.483443] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [272.483447] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2]

<7> [272.483451] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [272.483607] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected

<7> [272.483611] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [272.483614] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [272.483616] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [272.483619] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [272.483621] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [272.483623] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [272.483642] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [272.483648] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [272.483659] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [272.483665] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [272.528733] i915: Running intel_hangcheck_live_selftests/igt_reset_nop

<6> [272.532581] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.532618] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.534872] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.535329] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.535480] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.535482] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.539981] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.539984] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.542391] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.542665] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.542814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.542816] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.546049] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.546053] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.548211] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.548442] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.548684] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.548688] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.551698] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.551701] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.554007] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.554235] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.554395] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.554397] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.557177] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.557181] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.559442] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.559736] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.559886] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.559888] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.563135] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.563139] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.565496] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.565805] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.565964] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.565966] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.568625] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.568629] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.570907] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.571147] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.571305] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.571307] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.574166] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.574170] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.577587] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.578212] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.578371] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.578373] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.581802] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.581806] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.584167] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.584395] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.584624] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.584627] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.587902] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.587905] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.590211] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.590442] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.590682] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.590686] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.594049] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.594052] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.596455] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.596724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.596882] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.596884] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.600087] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.600091] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.601563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [272.602494] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.602904] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.603117] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.603120] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.606267] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.606271] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.608741] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.608958] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.609108] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.609110] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.612327] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.612331] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.614593] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.614829] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.614983] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.614986] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.618094] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.618097] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.620475] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.620722] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.620871] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.620873] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.623975] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.623978] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.626222] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.626438] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.626600] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.626602] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.629538] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.629542] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.631869] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.632097] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.632246] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.632249] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.635271] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.635275] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.637576] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.637804] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.637962] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.637964] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.640706] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.640709] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.642954] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.643181] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.643339] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.643341] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.646210] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.646214] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.648496] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.648789] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.648947] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.648949] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.651963] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.651967] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.654314] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.654593] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.654752] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.654754] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.657628] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.657632] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.659593] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.659833] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.659982] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.659985] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.662990] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.662994] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.665227] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.665467] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.665631] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.665634] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.668453] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.668457] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.670527] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.670749] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.670898] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.670900] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.673612] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.673616] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.675612] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.675850] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.675999] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.676001] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.678847] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.678850] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.681034] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.681284] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.681443] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.681445] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.684446] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.684450] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.686544] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.686775] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.686923] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.686925] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.689753] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.689756] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.691967] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.692194] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.692352] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.692354] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.695131] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.695135] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.697339] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.697643] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.697798] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.697800] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.700497] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.700500] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.702523] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.702781] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.702928] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.702930] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.705745] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.705748] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.707954] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.708180] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.708337] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.708339] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.711320] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.711324] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.713585] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.713813] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.713970] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.713972] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.716828] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.716832] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.719101] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.719327] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.719484] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.719486] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.722605] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.722609] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.724586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.724804] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.724953] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.724955] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.727714] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.727717] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.729921] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.730146] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.730304] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.730306] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.733076] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.733079] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.735224] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.735450] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.735615] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.735617] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.738348] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.738352] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.740097] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.740338] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.740487] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.740489] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.743398] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.743401] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.745557] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.745783] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.745940] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.745942] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.748642] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.748645] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.750892] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.751110] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.751258] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.751260] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.754241] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.754245] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.756429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.756740] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.756949] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.756952] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.759852] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.759856] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.762167] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.762397] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.762581] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.762584] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.765685] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.765690] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.767948] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.768175] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.768332] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.768334] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.771082] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.771086] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.773223] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.773449] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.773643] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.773646] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.776591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.776596] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.778856] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.779072] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.779220] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.779223] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.782106] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.782109] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.784381] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.784605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.784754] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.784756] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.787648] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.787651] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.789547] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.789770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.789919] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.789921] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.792823] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.792827] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.795095] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.795322] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.795480] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.795483] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.798405] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.798409] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.800570] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.800783] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.800930] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.800932] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.803730] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.803734] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.806025] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.806250] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.806399] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.806401] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.809260] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.809263] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.811567] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.811791] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.811940] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.811942] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.814665] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.814669] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.816931] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.817148] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.817296] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.817299] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.820146] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.820150] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.822419] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.822674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.822824] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.822826] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.825588] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.825609] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.827555] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.827797] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.827947] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.827949] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.830579] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.830583] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.832564] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.832780] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.832929] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.832931] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.835652] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.835656] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.837524] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.837787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.837945] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.837947] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.841056] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.841060] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.843210] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.843437] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.843655] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.843657] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.846386] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.846390] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.848612] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.848841] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.848998] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.849000] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.851665] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.851669] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.853885] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.854111] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.854267] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.854269] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.857115] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.857119] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.859377] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.859655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.859804] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.859806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.862707] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.862711] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.865076] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.865308] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.865483] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.865485] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.868768] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.868772] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.870982] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.871209] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.871367] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.871369] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.874337] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.874340] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.876575] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.876842] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.876991] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.876993] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.880070] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.880074] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.882229] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.882482] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.882704] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.882707] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.885470] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.885474] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.887586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.887814] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.887984] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.887986] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.890966] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.890970] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.893192] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.893421] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.893635] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.893638] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.896458] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.896462] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.898528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.898744] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.898891] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.898894] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.901575] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.901580] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.903596] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.903813] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.903961] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.903963] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.906592] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.906598] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.908600] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.908815] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.908963] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.908965] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.911591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.911594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.913577] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.913806] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.913963] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.913965] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.916535] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.916539] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.918525] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.918752] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.918908] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.918910] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.921615] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.921619] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.923528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.923743] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.923917] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.923920] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.926974] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.926978] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.929223] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.929451] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.929633] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.929636] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.932400] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.932404] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.934558] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.934788] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.934966] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.934969] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.937636] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.937640] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.939637] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.939864] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.940022] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.940024] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.942645] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.942648] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.944585] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.944811] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.944970] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.944972] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.948056] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.948060] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.950258] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.950485] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.950651] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.950654] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.953322] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.953326] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.955548] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.955763] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.955912] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.955914] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.958619] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.958623] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.960848] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.961062] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.961211] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.961213] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.964095] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.964099] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.966380] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.967577] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.968466] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.968478] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.986389] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.986402] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [272.989678] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [272.990412] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [272.991045] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [272.991054] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [272.997881] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [272.997889] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [273.000615] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [273.001069] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [273.001373] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [273.001377] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [273.007094] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [273.007101] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [273.009295] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [273.009692] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [273.009997] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [273.010001] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [273.016046] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [273.016053] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [273.018629] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [273.019010] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [273.019316] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [273.019319] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [273.024085] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [273.024092] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [273.026613] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [273.027001] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [273.027287] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [273.027309] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [273.031950] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [273.031957] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [273.034503] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [273.034908] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [273.035211] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [273.035215] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [273.035927] igt_reset_nop: 85 resets

<6> [273.059703] i915: Running intel_hangcheck_live_selftests/igt_reset_nop_engine

<6> [273.560934] igt_reset_nop_engine(rcs0): 792 resets

<6> [274.061805] igt_reset_nop_engine(bcs0): 1100 resets

<6> [274.562808] igt_reset_nop_engine(vcs0): 1085 resets

<6> [275.063581] igt_reset_nop_engine(vecs0): 1144 resets

<6> [275.081790] i915: Running intel_hangcheck_live_selftests/igt_reset_idle_engine

<6> [275.582618] rcs0: Completed 4022 idle resets

<6> [276.083581] bcs0: Completed 5633 idle resets

<6> [276.584663] vcs0: Completed 5685 idle resets

<6> [277.085611] vecs0: Completed 5879 idle resets

<6> [277.085642] i915: Running intel_hangcheck_live_selftests/igt_reset_active_engine

<6> [277.586798] rcs0: Completed 964 active resets

<6> [278.087699] bcs0: Completed 1268 active resets

<6> [278.588589] vcs0: Completed 1355 active resets

<6> [279.089799] vecs0: Completed 1362 active resets

<6> [279.113703] i915: Running intel_hangcheck_live_selftests/igt_reset_fail_engine

<6> [279.614732] igt_reset_fail_engine(rcs0): 1733 resets

<6> [280.115621] igt_reset_fail_engine(bcs0): 1674 resets

<6> [280.616714] igt_reset_fail_engine(vcs0): 1691 resets

<6> [281.117898] igt_reset_fail_engine(vecs0): 1721 resets

<6> [281.132697] i915: Running intel_hangcheck_live_selftests/igt_reset_engines

<6> [281.633533] i915_reset_engine(rcs0:idle): 2330 resets

<6> [282.134617] i915_reset_engine(bcs0:idle): 3903 resets

<6> [282.635570] i915_reset_engine(vcs0:idle): 4033 resets

<6> [283.136641] i915_reset_engine(vecs0:idle): 3883 resets

<6> [283.638010] i915_reset_engine(rcs0:active): 933 resets

<6> [284.138855] i915_reset_engine(bcs0:active): 1219 resets

<6> [284.639713] i915_reset_engine(vcs0:active): 1203 resets

<6> [285.140603] i915_reset_engine(vecs0:active): 1236 resets

<6> [285.641528] i915_reset_engine(rcs0:others-idle): 4471 resets

<6> [286.142519] i915_reset_engine(bcs0:others-idle): 5726 resets

<6> [286.644529] i915_reset_engine(vcs0:others-idle): 5858 resets

<6> [287.147629] i915_reset_engine(vecs0:others-idle): 5674 resets

<6> [287.650704] i915_reset_engine(rcs0:others-active): 727 resets

<6> [288.154104] i915_reset_engine(bcs0:others-active): 959 resets

<6> [288.656614] i915_reset_engine(vcs0:others-active): 1267 resets

<6> [289.162748] i915_reset_engine(vecs0:others-active): 912 resets

<6> [289.664648] i915_reset_engine(rcs0:others-priority): 824 resets

<6> [290.166833] i915_reset_engine(bcs0:others-priority): 1100 resets

<6> [290.668582] i915_reset_engine(vcs0:others-priority): 1039 resets

<6> [291.171502] i915_reset_engine(vecs0:others-priority): 1085 resets

<6> [291.673777] i915_reset_engine(rcs0:self-priority): 1031 resets

<6> [292.174953] i915_reset_engine(bcs0:self-priority): 1216 resets

<6> [292.675846] i915_reset_engine(vcs0:self-priority): 1171 resets

<6> [293.176785] i915_reset_engine(vecs0:self-priority): 1217 resets

<6> [293.205701] i915: Running intel_hangcheck_live_selftests/igt_reset_engines_atomic

<7> [293.205710] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [293.207092] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.207096] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.213589] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.213907] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.214065] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.214067] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [293.231822] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [293.232655] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.232660] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.238643] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.239033] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.239219] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.239222] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.263679] i915: Running intel_hangcheck_live_selftests/igt_reset_queue

<6> [293.265970] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.265976] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.268499] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.268867] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.269131] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.269151] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.270635] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.270642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.273227] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.273603] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.273872] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.273875] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.274960] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.274965] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.277483] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.277863] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.278168] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.278171] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.279206] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.279212] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.281539] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.281895] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.282145] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.282165] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.283194] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.283200] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.285590] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.285928] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.286178] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.286182] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.287252] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.287257] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.289586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.289923] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.290174] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.290178] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.291259] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.291267] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.293626] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.293976] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.294258] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.294262] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.295171] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.295176] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.297585] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.297900] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.298131] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.298134] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.298940] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.298944] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.301235] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.301566] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.301797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.301800] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.302606] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.302611] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.305026] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.305338] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.305584] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.305587] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.306382] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.306387] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.308604] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.308915] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.309146] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.309149] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.309960] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.309965] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.312229] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.312557] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.312790] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.312793] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.313602] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.313607] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.315946] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.316253] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.316484] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.316487] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.317294] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.317299] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.319571] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.319878] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.320109] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.320112] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.320919] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.320924] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.323232] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.323555] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.323787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.323790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.324599] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.324604] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.326958] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.327269] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.327499] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.327502] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.328310] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.328315] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.330607] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.330916] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.331146] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.331149] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.331960] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.331965] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.334228] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.334552] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.334783] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.334786] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.335585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.335590] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.337907] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.338216] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.338447] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.338451] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.339264] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.339269] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.341568] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.341877] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.342108] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.342111] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.342916] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.342921] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.345237] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.345562] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.345793] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.345796] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.346598] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.346603] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.348943] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.349255] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.349486] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.349489] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.350296] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.350301] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.352552] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.352862] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.353093] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.353096] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.353906] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.353910] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.356233] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.356558] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.356789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.356792] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.357595] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.357600] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.359951] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.360263] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.360493] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.360496] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.361308] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.361313] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.363555] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.363864] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.364095] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.364098] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.364905] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.364910] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.367219] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.367545] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.367777] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.367781] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.368583] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.368588] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.370535] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.370827] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.371043] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.371046] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.371847] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.371852] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.374227] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.374555] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.374788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.374791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.375596] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.375601] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.377935] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.378244] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.378475] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.378478] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.379287] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.379292] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.381565] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.381875] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.382105] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.382108] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.382918] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.382923] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.385235] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.385561] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.385792] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.385795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.386600] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.386605] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.388958] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.389269] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.389499] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.389503] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.390313] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.390318] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.392582] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.392891] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.393122] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.393125] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.394196] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.394201] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.396553] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.396862] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.397093] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.397096] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.397907] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.397912] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.400219] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.400541] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.400773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.400776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.401587] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.401592] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.403933] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.404244] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.404475] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.404478] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.405284] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.405289] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.407552] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.407860] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.408091] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.408095] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.408915] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.408920] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.411221] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.411544] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.411774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.411777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.412584] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.412589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.414536] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.414828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.415044] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.415047] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.415842] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.415847] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.418220] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.418549] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.418781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.418784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.419595] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.419600] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.421934] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.422243] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.422473] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.422476] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.423281] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.423286] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.425555] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.425865] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.426096] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.426099] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.426913] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.426918] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.429224] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.429550] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.429782] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.429785] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.430584] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.430589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.432535] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.432828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.433044] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.433047] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.433860] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.433865] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.436241] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.436568] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.436801] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.436804] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.437611] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.437616] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.439945] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.440254] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.440486] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.440489] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.441302] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.441307] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.443578] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.443888] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.444120] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.444123] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.444937] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.444941] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.447219] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.447541] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.447773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.447776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.448591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.448596] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.450968] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.451277] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.451508] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.451511] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.452329] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.452334] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.454581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.454889] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.455120] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.455123] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.455933] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.455938] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.458265] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.458606] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.458838] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.458842] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.459649] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.459654] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.461994] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.462287] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.462504] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.462507] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.463321] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.463326] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.465587] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.465895] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.466127] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.466130] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.466953] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.466958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.469232] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.469555] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.469787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.469790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.470609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.470614] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.472962] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.473270] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.473501] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.473504] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.474340] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.474345] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.476603] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.476910] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.477142] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.477145] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.477972] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.477977] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.480235] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.480576] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.480808] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.480812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.481627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.481632] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.483977] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.484287] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.484536] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.484539] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.485344] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.485349] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.487603] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.487911] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.488143] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.488146] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.488957] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.488962] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.491215] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.491539] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.491772] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.491775] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.492582] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.492587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.494918] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.495227] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.495458] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.495462] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.496278] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.496283] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.498584] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.498891] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.499123] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.499126] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.499941] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.499946] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.502232] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.502556] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.502789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.502793] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.503629] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.503634] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.506017] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.506324] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.506572] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.506575] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.507378] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.507383] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.509602] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.509913] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.510145] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.510148] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.510956] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.510961] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.513236] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.513563] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.513795] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.513798] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.514618] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.514623] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.519581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 3ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.519970] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.520200] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.520203] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.521009] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.521014] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.523219] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.523542] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.523774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.523777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.524585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.524589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.526967] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.527275] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.527506] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.527509] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.528316] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.528321] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.530591] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.530899] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.531130] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.531133] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.531939] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.531944] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.534219] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.534538] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.534770] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.534773] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.535575] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.535580] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.537928] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.538237] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.538468] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.538471] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.539282] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.539287] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.541600] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.541907] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.542138] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.542141] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.542951] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.542956] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.545294] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.545617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.545848] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.545852] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.546657] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.546662] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.549050] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.549359] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.549609] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.549612] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.550412] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.550417] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.552593] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.552902] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.553132] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.553135] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.553953] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.553958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.556231] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.556557] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.556790] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.556793] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.557597] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.557602] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.559951] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.560260] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.560490] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.560493] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.561307] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.561313] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.563581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.563889] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.564120] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.564124] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.564937] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.564943] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.567228] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.567554] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.567787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.567790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.568597] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.568602] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.570957] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.571265] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.571496] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.571499] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.572307] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.572312] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.574581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.574890] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.575122] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.575125] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.575943] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.575948] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.578299] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.578620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.578852] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.578855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.579657] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.579663] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.582043] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.583049] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.583934] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.583948] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.586405] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.586424] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.589618] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.590310] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.590927] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.590935] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.592606] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.592616] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.595589] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.596121] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.596592] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.596599] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.597817] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.597824] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.600604] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.601043] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.601401] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.601406] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.602489] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.602495] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.605024] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.605399] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.605704] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.605708] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.606677] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.606683] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.609137] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.609465] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.609726] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.609730] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.610604] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.610610] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.612988] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.613279] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.613495] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.613498] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.614289] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.614293] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.616603] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.616896] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.617114] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.617117] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.617915] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.617919] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.620297] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.620617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.620834] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.620837] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.621626] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.621630] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.623529] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.623778] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.623957] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.623959] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.624667] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.624671] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.626919] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.627183] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.627375] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.627378] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.628103] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.628107] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.630238] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.630502] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.630709] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.630712] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.631422] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.631426] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.633610] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.633875] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.634067] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.634069] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.634800] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.634804] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.637041] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.638041] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.638903] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.638915] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.641407] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.641425] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.644631] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.645346] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.645971] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.645980] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.647647] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.647656] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.650609] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.651144] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.651593] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.651600] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.652850] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.652857] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.655587] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.656026] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.656386] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.656391] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.657472] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.657478] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.659968] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.660342] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.660647] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.660651] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.661654] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.661660] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.664085] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.664396] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.664643] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.664647] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.665502] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.665507] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.667584] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.667858] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.668060] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.668063] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.668864] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.668868] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.671220] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.671513] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.671748] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.671751] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.672500] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.672504] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.674591] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.674840] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.675020] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.675023] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.675771] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.675775] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.678038] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.678278] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.678450] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.678452] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.679123] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.679127] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.681246] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.681485] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.681672] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.681674] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.682478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.682482] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.684563] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.684805] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.684979] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.684981] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.685648] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.685652] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.687904] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.688144] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.688318] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.688320] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.689001] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.689005] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.691247] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.691489] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.691676] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.691679] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.692335] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.692339] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.694554] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.694793] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.694965] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.694967] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.695641] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.695645] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.697611] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.697850] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.698022] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.698025] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.698702] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.698706] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.700924] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.701164] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.701336] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.701339] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.702007] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.702010] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.704280] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.704532] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.704706] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.704708] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.705370] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.705374] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.707597] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.707837] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.708010] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.708012] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.708675] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.708679] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.710618] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.710858] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.711032] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.711034] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.711713] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.711717] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.713531] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.713758] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.713920] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.713922] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.714590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.714594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.716528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.716755] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.716917] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.716920] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.717582] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.717586] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.719528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.719756] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.719917] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.719920] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.720596] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.720600] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.722625] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.722864] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.723038] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.723040] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.723717] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.723720] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.725931] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.726173] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.726345] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.726348] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.727020] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.727024] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.729288] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.729540] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.729713] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.729715] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.730379] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.730383] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.732585] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.732824] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.732997] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.732999] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.733666] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.733670] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.735619] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.735860] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.736032] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.736035] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.736716] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.736720] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.738528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.738758] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.738920] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.738922] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.739591] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.739594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.741530] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.741758] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.741919] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.741922] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.742587] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.742591] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.744529] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.744760] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.744921] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.744924] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.745589] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.745593] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.747572] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.747827] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.747989] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.747992] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.748649] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.748653] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.750588] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.750828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.751001] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.751004] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.751668] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.751672] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.753932] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.754165] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.754329] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.754332] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.754991] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.754995] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.757321] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.758385] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.759282] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.759296] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.761943] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.761962] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.765586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.766595] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.767435] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.767447] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.768003] rcs0: Completed 133 queued resets

<6> [293.775041] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.775062] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.778443] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.779589] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.780430] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.780442] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.783134] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.783154] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.787146] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.788241] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.789101] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.789113] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.791680] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.791699] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.794694] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.795393] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.796011] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.796019] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.797665] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.797675] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.800601] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.801137] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.801658] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.801683] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.802881] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.802889] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.805645] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.806094] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.806459] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.806464] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.807545] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.807551] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.809983] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.810359] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.810712] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.810738] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.811705] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.811712] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.814203] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.814594] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.814844] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.814848] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.815732] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.815737] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.818245] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.818595] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.818814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.818817] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.819607] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.819612] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.823315] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.823662] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.823855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.823857] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.824593] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.824597] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.826575] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.826840] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.827035] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.827037] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.827780] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.827784] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.830065] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.830328] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.830535] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.830538] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.831273] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.831277] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.833534] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.833799] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.833993] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.833996] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.834728] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.834732] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.837006] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.837269] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.837463] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.837465] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.838231] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.838235] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.840495] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.840767] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.840961] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.840964] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.841740] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.841744] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.844001] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.844264] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.844458] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.844461] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.845207] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.845211] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.847541] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.847808] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.848000] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.848003] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.848734] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.848738] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.851001] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.851265] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.851460] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.851463] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.852209] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.852213] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.854554] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.854817] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.855010] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.855013] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.855741] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.855745] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.858020] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.858285] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.858479] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.858482] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.859228] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.859232] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.861504] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.861815] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.862010] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.862012] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.862765] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.862770] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.865105] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.865369] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.865596] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.865599] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.866337] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.866342] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.868576] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.868842] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.869035] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.869038] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.869774] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.869778] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.872087] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.872352] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.872582] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.872585] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.873337] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.873341] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.875574] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.875839] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.876033] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.876036] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.876767] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.876771] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.879113] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.879379] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.879607] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.879609] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.880336] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.880340] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.882607] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.882873] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.883067] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.883069] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.883820] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.883824] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.886152] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.886417] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.886646] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.886649] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.887375] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.887379] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.889608] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.889872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.890066] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.890069] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.890821] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.890825] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.893119] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.893385] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.893614] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.893617] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.894343] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.894348] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.896588] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.896853] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.897047] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.897049] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.897801] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.897805] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.900134] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.900397] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.900626] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.900629] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.901354] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.901358] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.903607] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.903874] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.904068] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.904071] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.904824] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.904828] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.907128] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.907392] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.907620] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.907623] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.908350] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.908354] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.910605] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.910869] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.911062] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.911065] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.911818] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.911822] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.914119] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.914383] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.914611] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.914614] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.915343] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.915347] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.917672] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.918857] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.919761] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.919773] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.922272] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.922291] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.926204] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.927205] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.928151] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.928164] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.930685] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.930704] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.934235] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.934983] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.935576] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.935585] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.937312] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.937322] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.940281] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.940834] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.941259] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.941284] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.942613] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.942620] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.945303] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.945760] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.946105] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.946110] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.947269] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.947275] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.949561] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.949916] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.950186] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.950206] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.951187] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.951194] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.953626] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.953956] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.954207] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.954210] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.955103] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.955108] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.957632] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.957935] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.958153] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.958156] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.958970] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.958974] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.961595] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.961968] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.962178] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.962180] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.962901] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.962906] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.968636] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.968980] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.969173] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.969176] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.969903] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.969907] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.972215] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.972478] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.972685] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.972687] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.973437] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.973442] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.975636] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.975901] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.976094] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.976097] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.976849] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.976854] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.979194] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.979459] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.979694] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.979697] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.980444] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.980448] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.982616] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.982885] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.983079] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.983082] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.983829] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.983833] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.986111] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.986375] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.986601] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.986604] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.987346] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.987350] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.989612] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.989875] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.990068] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.990071] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.990820] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.990824] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.993065] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.993314] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.993496] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.993498] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.994250] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.994254] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [293.996587] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [293.996859] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [293.997052] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [293.997054] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [293.997832] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [293.997836] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.000119] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.000384] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.000591] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.000594] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.001339] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.001343] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.003583] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.003847] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.004039] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.004042] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.004780] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.004784] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.007203] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.008262] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.009161] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.009174] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.011808] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.011827] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.015568] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.016565] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.017406] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.017417] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.019856] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.019875] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.023053] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.024037] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.024890] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.024902] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.027377] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.027396] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.030671] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.031749] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.032649] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.032661] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.035216] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.035235] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.038625] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.039323] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.039956] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.039965] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.041776] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.041788] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.044614] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.045147] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.045595] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.045628] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.047006] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.047014] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.049601] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.050039] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.050397] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.050402] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.051558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.051565] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.054117] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.054492] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.054795] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.054799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.055786] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.055793] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.058278] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.058632] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.058879] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.058883] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.059758] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.059763] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.062211] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.062505] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.062736] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.062739] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.063537] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.063542] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.066615] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.066986] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.067201] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.067204] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.067983] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.067988] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.073623] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.073996] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.074210] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.074213] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.074997] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.075001] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.077304] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.077605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.077822] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.077825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.078637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.078642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.080960] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.081252] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.081469] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.081472] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.082288] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.082292] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.084570] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.084860] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.085077] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.085080] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.085897] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.085901] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.088287] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.088595] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.088813] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.088816] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.089629] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.089633] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.091934] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.092226] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.092442] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.092445] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.093257] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.093262] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.095581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.095873] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.096091] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.096094] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.096912] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.096917] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.099282] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.099590] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.099806] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.099809] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.100607] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.100611] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.102532] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.102811] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.103014] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.103017] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.103938] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.103942] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.106283] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.106591] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.106807] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.106810] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.107627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.107631] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.109926] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.110217] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.110434] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.110437] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.111240] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.111245] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.113605] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.113895] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.114112] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.114115] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.114921] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.114926] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.117274] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.117582] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.117800] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.117803] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.118616] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.118620] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.120933] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.121226] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.121443] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.121446] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.122258] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.122263] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.124603] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.124897] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.125114] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.125117] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.125920] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.125925] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.128302] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.128607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.128824] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.128827] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.129639] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.129644] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.132037] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.132329] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.132559] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.132562] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.133356] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.133361] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.135609] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.135899] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.136115] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.136118] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.136942] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.136946] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.139275] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.139584] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.139803] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.139806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.140609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.140614] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.142580] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.142856] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.143060] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.143063] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.143865] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.143869] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.146283] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.146589] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.146806] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.146809] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.147628] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.147633] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.149949] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.150240] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.150457] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.150460] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.151266] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.151270] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.153568] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.153860] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.154077] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.154080] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.154885] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.154889] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.157283] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.157593] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.157810] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.157813] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.158626] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.158630] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.160944] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.161239] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.161456] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.161458] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.162277] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.162282] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.164581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.164872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.165088] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.165090] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.165908] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.165913] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.168293] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.168599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.168816] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.168819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.169614] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.169618] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.171917] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.172209] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.172426] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.172428] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.173241] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.173246] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.175581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.175872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.176089] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.176092] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.176918] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.176922] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.179280] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.179585] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.179802] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.179805] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.180609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.180613] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.182911] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.183201] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.183419] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.183421] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.184220] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.184224] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.186606] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.186897] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.187112] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.187115] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.187934] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.187939] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.190288] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.190599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.190816] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.190819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.191628] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.191633] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.193958] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.194250] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.194466] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.194469] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.195275] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.195280] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.197580] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.197871] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.198087] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.198090] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.198906] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.198910] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.201300] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.201618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.201835] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.201838] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.202653] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.202657] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.205045] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.205339] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.205569] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.205572] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.206366] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.206371] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.208606] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.208897] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.209114] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.209117] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.209957] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.209962] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.212297] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.212605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.212823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.212826] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.213627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.213632] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.215928] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.216220] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.216437] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.216440] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.217237] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.217242] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.219579] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.219870] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.220087] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.220090] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.220898] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.220903] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.223265] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.223570] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.223788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.223791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.224601] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.224605] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.226535] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.226810] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.227013] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.227016] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.227827] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.227832] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.230178] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.230469] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.230703] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.230706] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.231498] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.231503] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.233581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.233872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.234088] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.234091] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.234938] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.234943] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.237277] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.237582] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.237799] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.237802] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.238597] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.238601] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.240906] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.241197] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.241413] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.241416] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.242231] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.242236] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.244608] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.244898] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.245115] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.245118] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.245936] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.245941] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.248286] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.248607] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.248825] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.248828] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.249637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.249642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.251978] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.252273] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.252490] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.252493] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.253321] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.253328] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.255580] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.255871] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.256088] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.256091] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.256907] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.256912] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.259312] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.259615] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.259832] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.259835] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.260648] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.260653] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.263020] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.263312] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.263542] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.263545] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.264331] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.264336] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.266610] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.266901] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.267116] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.267119] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.267931] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.267936] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.270302] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.270606] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.270824] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.270827] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.271048] bcs0: Completed 121 queued resets

<6> [294.272817] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.272823] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.275233] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.275540] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.275759] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.275762] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.276556] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.276561] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.278898] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.279192] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.279409] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.279412] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.280219] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.280223] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.282664] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.283724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.284625] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.284637] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.287090] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.287109] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.291023] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.292069] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.293006] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.293019] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.295487] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.295506] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.299252] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.300255] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.301113] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.301126] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.303589] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.303608] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.307501] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.308606] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.309478] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.309490] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.311994] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.312013] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.315202] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8000F0EC, count = 0, ret = 0

<7> [294.316263] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.317116] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.317124] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.318912] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.318925] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.322123] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.322689] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.323137] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.323143] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.324508] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.324534] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.327488] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.327961] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.328325] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.328330] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.329457] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.329464] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.332228] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.332647] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.332954] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.332958] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.333977] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.333984] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.337584] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.337996] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.338243] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.338247] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.339124] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.339130] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.344621] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.345032] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.345278] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.345281] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.346154] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.346159] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.348602] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.348943] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.349178] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.349181] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.350071] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.350076] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.352482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.352822] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.353071] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.353075] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.353946] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.353951] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.356279] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.356621] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.356870] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.356873] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.357752] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.357757] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.360197] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.360541] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.360791] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.360794] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.361661] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.361666] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.364111] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.364443] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.364709] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.364712] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.365580] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.365585] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.368030] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.368361] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.368624] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.368627] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.369490] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.369496] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.371940] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.372269] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.372533] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.372537] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.373402] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.373407] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.375605] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.375936] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.376183] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.376187] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.377076] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.377081] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.379549] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.379879] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.380129] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.380133] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.381033] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.381038] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.383469] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.383812] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.384062] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.384065] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.384986] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.384991] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.387377] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.387717] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.387967] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.387970] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.388848] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.388854] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.391279] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.391623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.391873] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.391876] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.392742] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.392747] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.395186] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.395530] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.395779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.395782] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.396662] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.396667] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.399085] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.399399] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.399650] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.399653] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.400511] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.400525] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.402890] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.403202] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.403435] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.403438] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.404303] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.404309] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.406599] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.406929] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.407177] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.407181] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.408070] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.408075] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.410482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.410824] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.411076] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.411079] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.411973] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.411979] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.414381] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.414731] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.414979] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.414983] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.415866] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.415871] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.419621] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.420033] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.420280] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.420283] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.421182] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.421187] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.423605] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.423936] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.424185] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.424188] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.425085] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.425091] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.427528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.427861] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.428109] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.428113] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.429003] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.429008] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.431443] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.431794] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.432042] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.432045] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.432935] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.432940] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.436621] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.437032] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.437278] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.437282] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.438160] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.438166] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.440604] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.440934] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.441182] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.441186] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.442077] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.442082] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.444501] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.444833] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.445069] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.445072] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.445960] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.445965] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.448226] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.448580] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.448815] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.448819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.449697] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.449702] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.453534] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.453947] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.454193] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.454197] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.455084] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.455090] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.457505] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.457846] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.458096] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.458099] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.458993] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.458998] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.461411] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.461750] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.461983] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.461987] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.462895] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.462900] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.465324] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.465716] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.465966] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.465969] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.466844] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.466850] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.470623] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.471035] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.471281] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.471285] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.472164] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.472170] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.474588] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.474919] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.475168] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.475171] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.476061] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.476066] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.478500] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.478841] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.479091] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.479094] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.479984] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.479990] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.482402] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.482754] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.483006] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.483009] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.483892] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.483897] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.487623] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.488034] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.488281] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.488284] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.489161] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.489167] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.491600] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.491930] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.492178] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.492182] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.493072] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.493077] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.495497] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.495830] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.496063] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.496067] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.496947] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.496953] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.499250] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.499587] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.499821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.499825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.500697] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.500702] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.503318] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.503770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.504016] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.504020] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.504910] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.504915] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.510623] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.511034] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.511279] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.511282] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.512170] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.512175] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.514597] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.514927] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.515177] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.515180] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.516065] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.516070] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.518513] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.518854] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.519103] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.519106] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.520030] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.520036] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.522477] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.522820] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.523070] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.523074] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.523957] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.523962] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.526282] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.526621] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.526871] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.526874] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.527744] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.527749] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.530171] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.530502] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.530767] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.530771] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.531637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.531642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.534037] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.534350] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.534595] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.534599] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.535456] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.535461] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.537603] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.537931] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.538180] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.538183] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.539037] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.539042] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.541471] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.541814] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.542064] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.542068] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.542921] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.542927] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.545221] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.545564] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.545814] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.545817] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.546668] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.546674] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.549057] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.549377] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.549624] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.549628] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.550478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.550483] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.552592] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.552921] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.553170] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.553173] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.554025] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.554031] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.556458] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.556802] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.557051] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.557054] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.557910] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.557915] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.560222] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.560568] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.560817] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.560821] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.561676] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.561682] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.564037] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.564351] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.564594] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.564598] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.565438] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.565443] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.567590] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.567962] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.568211] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.568214] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.569082] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.569088] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.574626] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.575036] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.575281] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.575285] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.576130] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.576136] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.578605] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.578934] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.579181] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.579185] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.580076] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.580082] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.582491] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.582831] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.583080] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.583084] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.583954] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.583960] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.586284] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.586624] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.586873] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.586876] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.587723] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.587728] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.590150] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.590480] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.590747] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.590751] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.591608] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.591614] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.594009] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.594322] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.594567] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.594571] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.595429] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.595434] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.597604] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.597933] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.598182] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.598185] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.599041] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.599047] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.601482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.601824] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.602074] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.602077] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.602952] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.602958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.605223] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.605569] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.605818] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.605822] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.606676] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.606682] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.609103] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.609438] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.609700] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.609703] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.610585] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.610590] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.614430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.614849] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.615096] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.615099] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.615962] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.615967] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.618227] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.618573] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.618823] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.618826] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.619674] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.619679] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.622121] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.622452] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.622716] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.622720] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.623578] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.623584] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.626018] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.626348] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.626611] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.626614] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.627474] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.627479] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.629602] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.629932] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.630181] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.630184] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.631044] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.631049] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.633479] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.633821] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.634069] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.634072] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.634929] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.634934] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.637232] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.637575] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.637824] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.637828] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.638678] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.638684] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.641117] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.641448] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.641710] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.641714] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.642584] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.642589] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.645032] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.645360] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.645634] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.645637] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.646484] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.646490] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.648586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.648916] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.649164] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.649168] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.650038] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.650043] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.652474] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.652818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.653066] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.653070] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.653921] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.653926] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.656231] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.656570] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.656821] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.656824] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.657683] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.657688] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.660121] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.660449] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.660712] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.660716] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.661581] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.661587] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.664034] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.664363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.664627] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.664630] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.665478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.665484] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.667591] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.667919] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.668167] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.668170] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.669022] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.669027] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.671473] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.671815] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.672063] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.672066] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.672935] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.672940] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.675230] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.675572] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.675822] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.675825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.676674] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.676680] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.679063] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.679373] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.679618] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.679621] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.680476] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.680481] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.682590] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.682919] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.683166] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.683170] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.684078] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.684084] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.686487] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.686825] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.687074] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.687078] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.687952] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.687957] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.690287] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.690628] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.690877] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.690881] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.691741] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.691746] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.694186] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.694515] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.694781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.694784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.695663] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.695668] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.698116] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.698445] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.698706] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.698710] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.699566] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.699571] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.701984] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.702312] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.702575] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.702579] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.703443] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.703448] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.705586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.705917] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.706166] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.706169] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.707068] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.707073] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.709472] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.709814] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.710063] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.710067] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.710921] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.710926] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.713296] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.713636] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.713885] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.713889] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.714748] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.714753] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.717197] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.717540] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.717792] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.717795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.718653] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.718659] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.721079] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.721408] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.721673] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.721677] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.722541] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.722546] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.724585] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.724912] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.725159] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.725162] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.726023] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.726029] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.728467] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.728810] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.729059] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.729063] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.729916] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.729922] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.732280] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.732620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.732869] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.732872] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.733736] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.733741] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.736177] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.736508] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.736781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.736784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.737650] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.737656] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.740077] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.740390] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.740643] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.740647] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.741542] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.741548] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.743978] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.744307] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.744578] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.744582] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.745464] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.745469] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.747594] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.747921] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.748168] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.748172] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.749076] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.749081] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.751489] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.751829] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.752079] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.752083] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.752980] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.752985] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.755394] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.755733] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.755983] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.755987] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.756873] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.756878] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.759284] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.759623] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.759873] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.759877] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.760738] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.760743] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.763180] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.763510] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.763780] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.763783] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.764637] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.764642] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.767076] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.767405] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.767676] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.767680] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.768558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.768563] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.770957] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.771286] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.771558] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.771562] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.771769] vcs0: Completed 119 queued resets

<6> [294.773413] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.773419] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.775595] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.775925] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.776173] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.776176] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.777049] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.777055] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.779498] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.779872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.780123] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.780126] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.780983] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.780989] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.783389] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.783686] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.783890] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.783892] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.784665] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.784669] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.787074] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 400MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.788226] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.789221] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.789234] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.791811] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.791829] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.795127] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.795876] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.796434] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.796442] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.797940] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.797950] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.800639] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.801178] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.801614] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.801621] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.802808] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.802815] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.805612] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.806074] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.806403] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.806407] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.807469] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.807475] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.810026] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.810422] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.810730] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.810734] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.811675] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.811681] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.817626] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.818022] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.818253] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.818257] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.819113] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.819118] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.821575] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.821888] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.822120] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.822123] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.822998] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.823003] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.825444] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.825786] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.826036] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.826039] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.826895] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.826900] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.829293] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.829633] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.829881] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.829885] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.830754] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.830760] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.833183] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.833514] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.833782] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.833785] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.834646] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.834651] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.837048] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.837361] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.837606] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.837609] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.838478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.838484] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.840588] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.840918] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.841165] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.841168] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.842020] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.842025] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.844450] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.844793] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.845042] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.845046] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.845911] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.845916] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.848228] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.848576] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.848811] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.848814] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.849666] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.849671] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.852123] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.852452] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.852723] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.852727] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.853590] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.853595] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.856023] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.856354] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.856631] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.856635] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.857486] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.857491] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.861346] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.861773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.862006] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.862009] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.862889] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.862894] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.865292] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.865634] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.865868] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.865871] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.866731] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.866736] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.869166] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.869496] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.869771] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.869775] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.870636] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.870641] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.873092] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.873422] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.873695] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.873698] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.874558] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.874564] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.878348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.878777] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.879010] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.879013] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.879864] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.879869] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.885625] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.886020] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.886251] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.886255] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.887105] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.887111] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.889540] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.889854] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.890088] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.890091] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.890950] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.890955] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.893230] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.893572] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.893822] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.893826] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.894672] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.894678] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.897126] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.897454] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.897739] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.897743] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.898626] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.898632] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.900610] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.900939] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.901188] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.901191] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.902044] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.902050] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.904494] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.904836] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.905086] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.905089] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.905944] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.905949] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.908238] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.908588] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.908824] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.908828] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.909675] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.909680] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.912111] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.912439] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.912708] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.912712] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.913571] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.913576] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.915957] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.916286] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.916584] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.916588] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.917441] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.917447] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.919614] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.919943] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.920192] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.920196] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.921048] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.921053] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.923455] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.923814] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.924064] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.924067] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.924925] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.924930] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.927242] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.927604] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.927839] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.927842] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.928688] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.928694] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.931123] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.931452] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.931747] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.931751] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.932609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.932614] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.934993] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.935323] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.935593] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.935597] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.936440] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.936445] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.938588] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.938916] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.939166] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.939169] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.940041] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.940046] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.942466] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.942823] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.943071] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.943075] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.943945] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.943950] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.946278] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.946617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.946867] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.946870] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.947731] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.947737] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.950140] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.950469] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.950768] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.950772] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.951627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.951633] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.954034] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.954363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.954633] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.954636] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.955500] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.955505] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.957930] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.958259] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.958508] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.958511] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.959386] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.959391] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.961577] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.961888] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.962119] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.962122] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.962994] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.962999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.965455] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.965797] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.966047] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.966050] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.966934] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.966939] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.969231] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.969581] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.969816] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.969819] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.970678] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.970683] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.973102] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.973430] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.973715] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.973718] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.974574] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.974579] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.977036] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.977365] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.977638] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.977642] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.978486] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.978492] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.980982] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.981312] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.981599] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.981603] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.982446] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.982451] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.984617] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.984956] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.985202] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.985206] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.986059] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.986064] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.988490] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.988864] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.989114] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.989118] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.989967] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.989972] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.995617] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.996029] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [294.996276] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [294.996279] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [294.997149] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [294.997154] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [294.999596] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [294.999924] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.000172] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.000176] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.001031] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.001036] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.003481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.003824] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.004074] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.004077] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.004958] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.004964] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.007227] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.007576] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.007811] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.007815] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.008664] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.008670] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.011146] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.011476] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.011774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.011778] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.012638] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.012643] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.015071] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.015401] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.015684] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.015687] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.016550] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.016555] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.018962] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 800MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.019302] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.019574] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.019578] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.020427] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.020433] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.023016] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.023347] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.023630] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.023634] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.024495] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.024501] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.026598] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.026928] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.027176] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.027179] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.028033] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.028038] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.033617] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.034027] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.034272] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.034276] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.035131] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.035137] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.037615] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.037944] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.038193] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.038196] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.039050] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.039056] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.041470] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.041846] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.042096] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.042099] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.043004] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.043009] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.045373] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.045743] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.045978] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.045981] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.046854] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.046859] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.049291] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 667MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.049655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.049890] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.049893] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.050759] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.050764] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.056614] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.057025] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.057273] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.057276] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.058142] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.058148] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.060592] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.060920] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.061167] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.061171] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.062031] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.062037] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.064481] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.064836] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.065085] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.065089] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.065963] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.065968] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.068265] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.068614] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.068848] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.068852] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.069698] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.069704] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.072140] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.072470] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.072766] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.072770] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.073622] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.073627] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.076017] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.076329] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.076594] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.076598] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.077434] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.077439] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.079928] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1000MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.080262] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.080510] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.080513] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.081399] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.081404] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.083591] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.083964] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.084212] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.084215] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.085119] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.085125] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.090587] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.090995] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.091241] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.091245] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.092144] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.092149] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.094600] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.094927] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.095175] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.095179] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.096079] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.096085] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.098506] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.098846] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.099094] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.099098] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.099998] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.100004] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.102420] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.102760] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.103009] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.103013] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.103924] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.103930] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.106272] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.106645] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.106880] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.106883] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.107773] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.107778] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.110242] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.110620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.110856] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.110859] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.111744] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.111749] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.114195] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.114545] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.114795] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.114799] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.115682] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.115687] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.119536] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.119947] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.120192] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.120196] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.121094] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.121099] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.123533] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.123861] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.124108] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.124112] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.125022] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.125027] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.127472] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.127811] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.128060] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.128064] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.128953] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.128959] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.131228] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.131590] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.131826] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.131830] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.132725] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.132730] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.135182] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.135512] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.135784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.135789] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.136670] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.136675] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.139113] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.139441] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.139711] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.139716] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.140661] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.140667] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.143121] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.143452] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.143711] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.143715] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.144681] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.144687] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.147148] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.147479] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.147738] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.147741] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.148718] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.148723] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.151241] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.151595] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.151831] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.151834] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.152809] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.152814] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.155294] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.155641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.155876] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.155879] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.156845] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.156851] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.159303] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.159646] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.159882] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.159885] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.160856] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.160862] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.163286] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.163631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.163865] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.163868] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.164841] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.164847] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.167297] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.167652] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.167887] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.167890] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.168912] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.168918] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.171292] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.171637] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.171873] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.171876] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.172858] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.172863] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.175290] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.175632] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.175868] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.175871] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.176846] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.176851] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.179303] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.179648] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.179882] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.179886] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.180851] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.180856] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.183284] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.183641] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.183875] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.183878] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.184844] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.184849] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.187245] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.187601] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.187836] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.187839] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.188803] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.188809] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.191306] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 933MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.191655] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.191889] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.191892] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.192871] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.192876] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.195245] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.195599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.195834] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.195837] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.196804] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.196810] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.199306] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.199665] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.199900] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.199903] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.200881] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.200886] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.203288] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1067MHz, before = 1067MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.203653] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.203887] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.203891] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.204866] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.204871] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.208588] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 667MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.208985] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.209217] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.209220] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.210237] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.210243] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.212586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.212901] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.213137] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.213140] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.214117] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.214122] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.216581] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.216896] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.217131] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.217135] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.218112] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.218117] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.220590] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.220923] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.221158] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.221161] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.222153] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.222159] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.224628] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 400MHz, before = 933MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.224991] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.225227] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.225230] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.226209] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.226215] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.231621] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.232019] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.232252] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.232256] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.233251] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.233256] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.235603] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.235917] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.236152] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.236155] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.237151] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.237156] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.239603] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.239917] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.240151] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.240155] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.241158] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.241163] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.243587] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.243903] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.244139] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.244142] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.245126] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.245131] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.247595] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.247910] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.248179] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.248183] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.249168] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.249173] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.251595] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.251911] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.252146] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.252149] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.253124] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.253130] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.255588] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.255901] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.256135] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.256139] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.257124] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.257130] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.259575] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.259891] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.260125] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.260128] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.261111] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.261116] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.263532] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.263845] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.264079] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.264082] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.265059] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.265065] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.267485] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.267818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.268054] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.268057] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.269034] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.269040] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.271473] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.271807] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.272042] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.272045] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.273026] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.273032] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.275441] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1167MHz, before = 1167MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.275782] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.276017] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.276021] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.276229] vecs0: Completed 120 queued resets

<6> [295.302697] i915: Running intel_hangcheck_live_selftests/igt_reset_wait

<6> [295.304769] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.304775] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.307278] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.307680] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.307960] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.307980] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.340789] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_ggtt

<6> [295.349387] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.349407] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.353476] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.354598] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.355470] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.355483] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.385796] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_ppgtt

<6> [295.397120] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.397140] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.400347] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.401351] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.402297] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.402310] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.434781] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence

<6> [295.442334] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [295.442355] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [295.446323] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [295.447490] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [295.448402] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [295.448415] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [295.480792] i915: Running intel_hangcheck_live_selftests/igt_handle_error

<7> [295.520782] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [295.521983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [295.522862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [295.523720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [295.524565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [295.570809] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [295.619181] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [295.673936] i915: probe of 0000:00:02.0 failed with error -25

<6> [295.842406] [IGT] i915_selftest: finished subtest hangcheck, SUCCESS

Results for igt@i915_selftest@live@hangcheck