Results for igt@kms_frontbuffer_tracking@basic

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.28-gd991240f6 (x86_64) (Linux: 6.6.0-rc3-linus-v6.6-rc3-g6465e260f487+ x86_64)
Out 
Opened device: /dev/dri/card0
FBC last action not supported
Can't test DRRS: no usable screen.
Starting subtest: basic
Subtest basic: SUCCESS (3.384s)
Err 
Starting subtest: basic
Subtest basic: SUCCESS (3.384s)
Dmesg
<6> [213.292673] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [213.292695] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [213.292701] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [213.292706] nvme 0000:02:00.0: [ 0] RxErr (First)
<6> [213.294811] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [213.294824] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [213.294829] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [213.294833] nvme 0000:02:00.0: [ 0] RxErr (First)
<6> [213.372130] Console: switching to colour dummy device 80x25
<6> [213.372763] [IGT] kms_frontbuffer_tracking: executing
<7> [213.376897] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [213.378243] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [213.378768] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [213.396882] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1]
<7> [213.396904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:248:DP-1]
<7> [213.397290] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] disconnected
<7> [213.398336] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1]
<7> [213.398350] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]
<7> [213.398765] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected
<7> [213.399783] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2]
<7> [213.399796] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2]
<7> [213.400147] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected
<7> [213.401595] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1]
<7> [213.401609] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:239:eDP-1]
<7> [213.402520] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:238:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [213.402848] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [213.403149] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [213.403445] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [213.403806] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] Assigning DFP sink color depth as 8 bpc.
<7> [213.403819] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD monitor
<7> [213.403827] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD size 20, SAD count 0
<7> [213.403860] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] VRR capable: no
<7> [213.404151] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [213.405178] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [213.405502] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [213.406596] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] probed modes :
<7> [213.406610] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
<7> [213.406620] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 52 361310 3200 3248 3280 3424 1800 1802 1807 2045 0x40 0xa
<7> [213.406684] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1]
<7> [213.406695] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:248:DP-1]
<7> [213.407034] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] disconnected
<7> [213.407079] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1]
<7> [213.407090] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]
<7> [213.407426] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected
<7> [213.407465] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2]
<7> [213.407474] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2]
<7> [213.407850] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected
<7> [213.411194] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:269]
<7> [213.411335] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:270]
<7> [213.411564] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:271]
<7> [213.411784] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:272]
<7> [213.411999] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:273]
<6> [213.414164] [IGT] kms_frontbuffer_tracking: starting subtest basic
<7> [213.414325] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [213.420167] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:269]
<7> [213.420307] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:270]
<7> [213.420517] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:271]
<7> [213.420764] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:272]
<7> [213.420990] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:273]
<7> [213.422184] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:274]
<6> [213.471668] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [213.471701] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [213.471710] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [213.471718] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [213.527734] [drm:drm_mode_setcrtc] [CRTC:98:pipe A]
<7> [213.527914] [drm:drm_mode_setcrtc] [CONNECTOR:239:eDP-1]
<7> [213.578883] [drm:drm_mode_setcrtc] [CRTC:167:pipe B]
<6> [213.581190] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [213.581209] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [213.581215] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [213.581220] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [213.587818] [drm:drm_mode_setcrtc] [CRTC:236:pipe C]
<7> [213.630727] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [213.632071] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [213.713436] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:274] from all active usage due to RMFB ioctl
<7> [213.713708] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:274] is removed
<7> [213.713912] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 985) -> ( 0 - 0), size 985 -> 0
<7> [213.714714] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [213.715427] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [213.716235] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 26, 79, 105, 105, 183, 235, 261, 287, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [213.716980] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 30, 88, 117, 117, 203, 260, 289, 317, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [213.717724] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0
<7> [213.718487] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0
<7> [213.719275] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 23719 required 0
<7> [213.720049] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 21483 required 0
<7> [213.727379] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]
<7> [213.745768] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:266]
<7> [213.746329] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:274]
<7> [213.746900] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:277]
<7> [213.747391] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:278]
<6> [213.779957] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [213.779979] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [213.779984] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [213.779990] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [214.579463] [drm:drm_mode_setcrtc] [CRTC:98:pipe A]
<7> [214.579704] [drm:drm_mode_setcrtc] [CONNECTOR:239:eDP-1]
<7> [214.580032] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 985), size 0 -> 985
<7> [214.580844] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [214.581598] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0
<7> [214.582302] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 26, 79, 105, 105, 183, 235, 261, 287, 40, 0, 0
<7> [214.583024] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 88, 117, 117, 203, 260, 289, 317, 41, 0, 0
<7> [214.583756] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1445240 num active planes 1
<7> [214.584486] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 1446
<7> [214.585311] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 23719 required 1446
<7> [214.585688] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 21483 required 1446
<7> [214.589216] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23961600 bytes of contiguous stolen space for FBC, limit: 1
<7> [214.589535] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]
<7> [214.607656] [drm:drm_mode_setcrtc] [CRTC:167:pipe B]
<7> [214.616009] [drm:drm_mode_setcrtc] [CRTC:236:pipe C]
<7> [214.646143] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [214.646627] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [214.729118] [drm:drm_mode_setcrtc] [CRTC:98:pipe A]
<7> [214.729296] [drm:drm_mode_setcrtc] [CONNECTOR:239:eDP-1]
<7> [214.746289] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<6> [214.773146] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [214.773188] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [214.773201] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [214.773214] nvme 0000:02:00.0: [ 0] RxErr (First)
<6> [214.800807] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [214.800844] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [214.800854] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [214.800863] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [214.829212] [drm:drm_mode_setcrtc] [CRTC:98:pipe A]
<7> [214.829389] [drm:drm_mode_setcrtc] [CONNECTOR:239:eDP-1]
<7> [214.846632] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [214.929200] [drm:drm_mode_setcrtc] [CRTC:98:pipe A]
<7> [214.929371] [drm:drm_mode_setcrtc] [CONNECTOR:239:eDP-1]
<7> [214.946649] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<6> [214.964711] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [214.964754] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [214.964767] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [214.964779] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [215.031906] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:278] from all active usage due to RMFB ioctl
<7> [215.032105] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:278] is removed
<7> [215.032301] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 985) -> ( 0 - 0), size 985 -> 0
<7> [215.033122] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [215.033912] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [215.034691] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 26, 79, 105, 105, 183, 235, 261, 287, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [215.035398] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 30, 88, 117, 117, 203, 260, 289, 317, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [215.036160] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0
<7> [215.036940] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0
<7> [215.037758] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 23719 required 0
<7> [215.038498] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 21483 required 0
<7> [215.045425] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]
<7> [215.146720] [drm:drm_mode_setcrtc] [CRTC:98:pipe A]
<7> [215.146886] [drm:drm_mode_setcrtc] [CONNECTOR:239:eDP-1]
<7> [215.147205] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 985), size 0 -> 985
<7> [215.148014] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [215.148774] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0
<7> [215.149496] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 26, 79, 105, 105, 183, 235, 261, 287, 40, 0, 0
<7> [215.150378] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 88, 117, 117, 203, 260, 289, 317, 41, 0, 0
<7> [215.151135] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1445240 num active planes 1
<7> [215.151912] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 1446
<7> [215.152667] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 23719 required 1446
<7> [215.153378] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 21483 required 1446
<7> [215.160444] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23961600 bytes of contiguous stolen space for FBC, limit: 1
<7> [215.161308] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]
<7> [215.195431] [drm:drm_mode_setcrtc] [CRTC:167:pipe B]
<7> [215.203782] [drm:drm_mode_setcrtc] [CRTC:236:pipe C]
<6> [215.231191] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [215.231225] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [215.231235] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [215.231244] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [215.231524] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [215.232246] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [215.232966] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<6> [215.251913] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [215.251945] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [215.251954] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [215.251963] nvme 0000:02:00.0: [ 0] RxErr (First)
<6> [215.258137] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [215.258158] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [215.258165] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [215.258172] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [215.313494] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [215.397213] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:274]
<7> [215.403425] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [215.404466] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<6> [215.437830] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [215.437871] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [215.437884] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [215.437896] nvme 0000:02:00.0: [ 0] RxErr (First)
<6> [215.443775] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [215.443809] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [215.443822] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [215.443834] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [215.480253] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [215.567877] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [215.568953] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<6> [215.572089] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [215.572124] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [215.572136] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [215.572149] nvme 0000:02:00.0: [ 0] RxErr (First)
<6> [215.602810] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [215.602853] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [215.602865] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [215.602877] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [215.647078] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [215.735332] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [215.736393] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [215.813965] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [215.997193] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [215.997703] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [216.080218] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<6> [216.089741] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [216.089784] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [216.089797] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [216.089809] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [216.214105] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [216.215287] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [216.297791] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [216.392769] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [216.405972] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<6> [216.418865] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [216.418887] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [216.418892] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [216.418898] nvme 0000:02:00.0: [ 0] RxErr (First)
<6> [216.443792] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [216.443835] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [216.443848] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [216.443860] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [216.453731] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turning VDD off
<7> [216.454612] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7> [216.481271] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<6> [216.507981] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [216.508024] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [216.508036] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [216.508048] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [216.518693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [216.519503] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [216.520324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<6> [216.543166] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [216.543209] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [216.543221] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [216.543233] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [216.547635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [216.548440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [216.549297] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [216.550145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [216.550949] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [216.551749] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [216.552489] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [216.553288] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [216.575930] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<6> [216.576162] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [216.576183] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [216.576188] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [216.576193] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [216.581669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [216.582041] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [216.582350] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [216.595048] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [216.595665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [216.596010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [216.596370] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [216.596730] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [216.597054] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [216.597369] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [216.597748] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [216.598085] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<6> [216.636084] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [216.636127] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [216.636139] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [216.636151] nvme 0000:02:00.0: [ 0] RxErr (First)
<6> [216.656528] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [216.656633] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [216.656646] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [216.656659] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [216.681696] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [216.714703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [216.715515] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [216.716320] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [216.747838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [216.748686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [216.749494] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [216.750331] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [216.751158] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [216.751972] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [216.752765] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [216.753521] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [216.764140] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:274] from all active usage due to RMFB ioctl
<7> [216.764251] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:274] is removed
<7> [216.764371] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 985) -> ( 0 - 0), size 985 -> 0
<7> [216.764999] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [216.765589] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [216.766110] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 26, 79, 105, 105, 183, 235, 261, 287, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [216.766682] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 30, 88, 117, 117, 203, 260, 289, 317, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [216.767196] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0
<7> [216.767764] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0
<7> [216.768261] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 23719 required 0
<7> [216.768821] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 21483 required 0
<7> [216.780750] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]
<6> [216.799615] [IGT] kms_frontbuffer_tracking: finished subtest basic, SUCCESS
<6> [216.801928] [IGT] kms_frontbuffer_tracking: exiting, ret=0
<7> [216.803474] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [216.815692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [216.816419] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [216.816981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [216.840894] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 985), size 0 -> 985
<7> [216.842145] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [216.843028] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0
<7> [216.843854] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 26, 79, 105, 105, 183, 235, 261, 287, 40, 0, 0
<7> [216.844625] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 88, 117, 117, 203, 260, 289, 317, 41, 0, 0
<7> [216.845365] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1445240 num active planes 1
<7> [216.846343] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 1446
<7> [216.847142] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 23719 required 1446
<7> [216.847973] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 21483 required 1446
<7> [216.849403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [216.850476] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [216.851441] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [216.852357] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [216.853241] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [216.854083] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [216.854873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [216.855821] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [216.856675] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23961600 bytes of contiguous stolen space for FBC, limit: 1
<7> [216.857382] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]
<6> [216.879901] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [216.879937] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [216.879946] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [216.879955] nvme 0000:02:00.0: [ 0] RxErr (First)
<6> [216.881691] Console: switching to colour frame buffer device 400x112
<6> [216.911028] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0
<4> [216.911061] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
<4> [216.911070] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [216.911080] nvme 0000:02:00.0: [ 0] RxErr (First)
<7> [216.915661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [216.916516] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [216.917442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
Created at 2023-09-24 23:29:06