igt@i915_suspend@basic-s3-without-i915 on bat-jsl-3@linus-v6.6-rc3 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-gd991240f6 (x86_64) (Linux: 6.6.0-rc3-linus-v6.6-rc3-g6465e260f487+ x86_64)
Out	Starting subtest: basic-s3-without-i915 Opened device: /dev/dri/card0 [cmd] rtcwake: wakeup from "mem" using /dev/rtc0 at Sun Sep 24 21:54:21 2023 Subtest basic-s3-without-i915: SUCCESS (6.869s)
Err	Starting subtest: basic-s3-without-i915 Subtest basic-s3-without-i915: SUCCESS (6.869s)
Dmesg	<6> [600.445345] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [600.445371] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [600.445379] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [600.445386] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [600.473559] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [600.473592] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [600.473603] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [600.473614] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [600.475843] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [600.475870] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [600.475879] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [600.475890] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [600.519403] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [600.519425] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [600.519431] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [600.519437] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [600.536770] Console: switching to colour dummy device 80x25 <6> [600.537588] [IGT] i915_suspend: executing <6> [600.542594] [IGT] i915_suspend: starting subtest basic-s3-without-i915 <7> [600.542798] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <6> [600.580003] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [600.580027] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [600.580033] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [600.580038] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [600.583046] [IGT] Unloading i915 <6> [600.606992] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [600.607014] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [600.607020] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [600.607026] nvme 0000:02:00.0: [ 0] RxErr (First) <4> [601.359034] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000 <6> [601.378400] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [601.378421] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [601.378426] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [601.378431] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [601.418837] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [601.418862] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [601.418867] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [601.418873] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [601.423347] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [601.423367] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [601.423372] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [601.423377] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [601.445722] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [601.445764] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [601.445777] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [601.445789] nvme 0000:02:00.0: [ 0] RxErr (First) <4> [602.361054] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x200f0000 <4> [603.367032] snd_hda_intel 0000:00:1f.3: Codec #2 probe error; disabling it... <6> [603.382471] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC700: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker <6> [603.382497] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <6> [603.382504] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) <6> [603.382510] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 <6> [603.382515] snd_hda_codec_realtek hdaudioC0D0: inputs: <6> [603.382521] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 <6> [603.382903] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [603.382924] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [603.382930] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [603.382937] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [603.394014] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [603.394034] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [603.394039] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [603.394045] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [603.413199] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turning VDD off <7> [603.414087] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <6> [604.158450] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0) <6> [604.176029] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input64 <6> [604.179256] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.179293] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.179299] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.179305] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.187196] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input65 <7> [604.194958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [604.195452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [604.195853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [604.196194] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [604.196509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [604.409887] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <6> [604.423457] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.423493] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.423505] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.423517] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.424098] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.424124] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.424135] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.424147] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.424171] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <6> [604.439650] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.439767] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.439780] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.439792] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [604.480824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [604.481612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [604.482833] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [604.483630] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [604.484460] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [604.485321] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [604.486128] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [604.487002] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [604.487782] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [604.488519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [604.489328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [604.492541] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [604.493388] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [604.494828] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [604.495586] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [604.496372] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4209566/8388608 link 350797/524288, found tu 0, data 0/0 link 0/0) <7> [604.497164] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [604.497973] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [604.498747] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [604.499473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3316, found 0) <7> [604.500426] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [604.501293] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3316, found 0) <7> [604.502172] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [604.503203] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [604.504127] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [604.504900] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1816, found 0) <7> [604.505631] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [604.506834] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1816, found 0) <7> [604.507553] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1802, found 0) <7> [604.508314] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1807, found 0) <7> [604.509304] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [604.510090] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3316, found 0) <7> [604.511032] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [604.511804] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3316, found 0) <7> [604.512858] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [604.513580] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [604.514349] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [604.515115] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1816, found 0) <6> [604.516059] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.516094] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.516107] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.516121] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [604.515861] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [604.516590] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1816, found 0) <7> [604.517370] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1802, found 0) <7> [604.518058] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1807, found 0) <7> [604.518842] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [604.519476] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [604.520159] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [604.520826] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [604.521456] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 361310, found 0) <7> [604.522153] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 361310, found 0) <7> [604.522840] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [604.523470] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [604.524140] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:98:pipe A] releasing DPLL 0 <7> [604.524796] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 1024) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [604.525415] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 985) -> ( 0 - 0), size 985 -> 0 <7> [604.525914] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb ( 985 - 1024) -> ( 0 - 0), size 39 -> 0 <7> [604.526376] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [604.526858] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [604.527317] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 26, 79, 105, 105, 183, 235, 261, 287, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [604.527799] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 30, 88, 117, 117, 203, 260, 289, 317, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [604.528281] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0 <7> [604.528801] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0 <7> [604.529295] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 23719 required 0 <7> [604.529807] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 21483 required 0 <7> [604.530357] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <6> [604.530727] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.530750] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.530757] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.530764] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [604.530863] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [604.531347] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [604.531784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [modeset] <7> [604.532153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [604.532511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [604.532902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [604.533266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [604.533617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [604.534035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no <7> [604.534408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no <7> [604.534799] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no <7> [604.540725] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6> [604.548399] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.548419] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.548425] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.548431] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.550948] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.550964] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.550970] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.550975] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.556931] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.556945] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.556949] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.556954] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.586329] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.586354] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.586359] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.586365] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.626450] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.626493] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.626505] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.626518] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.659251] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.659294] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.659306] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.659318] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.660961] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.660991] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.661002] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.661013] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.662629] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.662699] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.662709] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.662720] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.692640] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.692756] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.692769] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.692782] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.699968] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.700011] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.700023] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.700036] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.704810] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.704842] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.704853] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.704864] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.712149] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.712191] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.712203] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.712215] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.739732] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.739776] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.739789] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.739801] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.742370] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.742398] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.742409] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.742420] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [604.746815] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:239:eDP-1] set backlight PWM = 0 <7> [604.748200] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <6> [604.749397] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.749425] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.749436] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.749447] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.750114] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.750136] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.750146] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.750155] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [604.754603] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turning VDD on <7> [604.755761] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [604.758964] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turn panel power off <7> [604.759779] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 wait for panel power off time <7> [604.760538] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <6> [604.762040] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.762069] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.762079] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.762090] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.764819] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.764851] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.764863] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.764875] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [604.766439] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [604.767236] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:238:DDI A/PHY A] - long <7> [604.768032] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [604.769099] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:238:DDI A/PHY A] <7> [604.787358] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [604.787968] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:238:DDI A/PHY A] - long <7> [604.788539] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [604.789116] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:238:DDI A/PHY A] <6> [604.793042] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.793076] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.793088] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.793101] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.793473] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.793495] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.793505] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.793516] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.799948] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.799972] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.799980] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.799990] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [604.814026] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [604.814870] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [604.814944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A <7> [604.815640] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:238:DDI A/PHY A] - long <7> [604.816380] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 30 <7> [604.816639] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:98:pipe A] <7> [604.817521] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:238:DDI A/PHY A] <7> [604.818282] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [604.819110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [604.819892] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A] <7> [604.821094] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [604.822533] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DDI A/PHY A] <7> [604.823325] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DDI B/PHY B] <7> [604.824046] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST A] <7> [604.824763] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:250:DP-MST B] <7> [604.825456] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:251:DP-MST C] <7> [604.826188] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI C (TC)/PHY C] <7> [604.826906] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:239:eDP-1] <7> [604.827686] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [604.828422] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [604.829264] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 4 <7> [604.830190] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A] <6> [604.838779] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.838815] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.838827] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.838840] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.867937] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.867975] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.867987] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.867999] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.872977] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.873010] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.873021] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.873033] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [604.875355] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <6> [604.878414] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.878447] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.878458] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.878470] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.900376] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.900418] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.900431] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.900443] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.903998] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.904030] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.904042] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.904055] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.904976] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.905002] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.905012] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.905023] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.906223] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.906254] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.906267] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.906279] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.915179] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.915214] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.915226] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.915239] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.916148] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.916175] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.916187] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.916199] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.926267] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.926301] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.926313] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.926324] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.931967] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.931997] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.932007] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.932017] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.934367] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.934395] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.934404] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.934414] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.942364] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.942391] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.942400] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.942408] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.948170] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.948193] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.948200] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.948206] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.949067] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.949082] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.949088] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.949094] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.955407] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.955429] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.955433] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.955439] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.965027] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.965045] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.965050] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.965055] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [604.971749] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <7> [604.972426] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 wait for panel power cycle <6> [604.978808] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.978826] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.978831] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.978836] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [604.984030] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [604.984047] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [604.984052] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [604.984057] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [605.000312] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [605.000338] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [605.000344] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [605.000349] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [605.002246] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [605.002281] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [605.002291] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [605.002301] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [605.011451] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [605.011490] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [605.011501] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [605.011513] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [605.018100] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [605.018150] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [605.018162] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [605.018175] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [605.021203] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [605.021233] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [605.021245] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [605.021257] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [605.419196] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [605.420057] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [605.917242] PM: suspend entry (deep) <6> [605.919550] Filesystems sync: 0.002 seconds <6> [605.922071] Freezing user space processes <6> [605.925048] Freezing user space processes completed (elapsed 0.002 seconds) <6> [605.925064] OOM killer disabled. <6> [605.925069] Freezing remaining freezable tasks <6> [605.926359] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) <6> [605.942163] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [605.942185] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [605.942192] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [605.942198] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [605.962938] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [605.962973] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [605.962986] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [605.962998] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [605.967562] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [605.967590] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [605.967603] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [605.967615] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [605.985828] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [605.985847] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [605.985853] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [605.985859] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [605.997189] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [605.997205] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [605.997210] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [605.997215] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [605.997407] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [605.997417] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [605.997421] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [605.997425] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.008549] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.008583] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.008595] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.008607] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.010069] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.010102] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.010114] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.010127] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.030951] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.030984] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.030997] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.031009] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.042901] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.042935] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.042947] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.042959] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [606.043489] PM: suspend of devices complete after 88.541 msecs <7> [606.043506] PM: start suspend of devices complete after 116.913 msecs <7> [606.050233] PM: late suspend of devices complete after 6.715 msecs <6> [606.055350] ACPI: EC: interrupt blocked <7> [606.081028] PM: noirq suspend of devices complete after 29.580 msecs <6> [606.081058] ACPI: PM: Preparing to enter system sleep state S3 <6> [606.089033] ACPI: EC: event blocked <6> [606.089068] ACPI: EC: EC stopped <6> [606.089074] ACPI: PM: Saving platform NVS memory <6> [606.090055] Disabling non-boot CPUs ... <6> [606.099893] smpboot: CPU 1 is now offline <6> [606.120261] smpboot: CPU 2 is now offline <6> [606.133055] smpboot: CPU 3 is now offline <7> [606.143981] Checking wakeup interrupts <7> [606.143990] Calling kvm_suspend+0x0/0x90 [kvm] <7> [606.144088] Calling mce_syscore_suspend+0x0/0x10 <7> [606.144098] Calling timekeeping_suspend+0x0/0x320 <7> [606.144836] Calling save_ioapic_entries+0x0/0xa0 <7> [606.146246] Calling i8259A_suspend+0x0/0x30 <7> [606.146285] Calling iommu_suspend+0x0/0x1b0 <7> [606.146398] Calling fw_suspend+0x0/0x20 <7> [606.146405] Calling acpi_save_bm_rld+0x0/0x20 <7> [606.146434] Calling lapic_suspend+0x0/0x180 <6> [606.146613] ACPI: PM: Low-level resume complete <6> [606.146686] ACPI: EC: EC started <6> [606.146692] ACPI: PM: Restoring platform NVS memory <7> [606.146703] Calling init_counter_refs+0x0/0x70 <7> [606.146714] Calling lapic_resume+0x0/0x280 <7> [606.146849] Calling acpi_restore_bm_rld+0x0/0x70 <7> [606.146871] Calling irqrouter_resume+0x0/0x50 <7> [606.146876] Calling iommu_resume+0x0/0x190 <7> [606.147004] Calling i8259A_resume+0x0/0x30 <7> [606.147239] Calling umwait_syscore_resume+0x0/0x10 <7> [606.147245] Calling ioapic_resume+0x0/0xb0 <7> [606.147545] Calling irq_pm_syscore_resume+0x0/0x10 <7> [606.148572] Calling timekeeping_resume+0x0/0x1c0 <7> [606.148722] Timekeeping suspended for 16.683 seconds <7> [606.149318] Calling mce_syscore_resume+0x0/0x30 <7> [606.149362] Calling microcode_bsp_resume+0x0/0xc0 <7> [606.149370] Calling kvm_resume+0x0/0x70 [kvm] <6> [606.149572] Enabling non-boot CPUs ... <6> [606.149980] smpboot: Booting Node 0 Processor 1 APIC 0x2 <6> [606.155745] CPU1 is up <6> [606.155966] smpboot: Booting Node 0 Processor 2 APIC 0x4 <6> [606.160319] CPU2 is up <6> [606.160535] smpboot: Booting Node 0 Processor 3 APIC 0x6 <6> [606.164417] CPU3 is up <6> [606.164917] ACPI: PM: Waking up from system sleep state S3 <4> [606.190774] ACPI: button: The lid device is not compliant to SW_LID. <6> [606.208066] ACPI: EC: interrupt unblocked <7> [606.225744] PM: noirq resume of devices complete after 19.063 msecs <7> [606.234973] PM: early resume of devices complete after 6.597 msecs <6> [606.237500] ACPI: EC: event unblocked <6> [606.259580] nvme nvme0: 4/0/0 default/read/poll queues <6> [606.260019] serial 00:03: activated <6> [606.274286] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.274321] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.274333] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.274345] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.287900] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.287941] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.287953] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.287965] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.292397] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.292438] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.292450] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.292462] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.295218] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.295259] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.295272] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.295284] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.343727] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.343768] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.343780] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.343793] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.372646] r8152 1-8:1.0 enx00e04c680775: carrier on <6> [606.405689] r8169 0000:01:00.0 enp1s0: Link is Down <7> [606.406595] PM: resume of devices complete after 171.600 msecs <6> [606.412500] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0) <6> [606.477016] OOM killer enabled. <6> [606.477025] Restarting tasks ... <6> [606.477230] pcieport 0000:00:1c.0: PCI bridge to [bus 01] <6> [606.477253] pcieport 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6> [606.477265] pcieport 0000:00:1c.0: bridge window [mem 0x7fd00000-0x7fdfffff] <6> [606.478216] pcieport 0000:00:1c.4: PCI bridge to [bus 02] <6> [606.478231] pcieport 0000:00:1c.4: bridge window [mem 0x7fc00000-0x7fcfffff] <4> [606.482116] done. <5> [606.482143] random: crng reseeded on system resumption <6> [606.489994] PM: suspend exit <6> [606.490547] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.490567] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.490573] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.490579] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.494387] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.494408] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.494413] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.494419] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.496205] [IGT] Re-loading i915 <3> [606.497370] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 <6> [606.504648] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.504669] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.504674] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.504680] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.506918] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.506936] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.506941] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.506946] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.549170] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0) <6> [606.549618] ata2: SATA link down (SStatus 4 SControl 300) <6> [606.574853] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.574874] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.574880] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.574885] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.581628] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.581648] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.581653] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.581659] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.605575] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.605598] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.605603] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.605609] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.608436] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0) <6> [606.633849] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.633870] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.633876] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.633881] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.638935] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.638955] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.638960] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.638965] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.640136] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.640151] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.640156] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.640161] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.663853] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.663873] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.663879] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.663884] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.690550] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.690573] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.690581] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.690587] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [606.786855] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7> [606.787398] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [606.787801] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Jasper Lake PCH <7> [606.788222] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [606.788824] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [606.789258] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 19200 kHz <7> [606.790595] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0001, instances: 0001 <7> [606.790939] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <7> [606.791906] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <6> [606.792288] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.792306] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.792311] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.792317] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [606.792280] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [606.792582] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M <6> [606.792878] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [606.792887] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [606.793737] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [606.793777] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x000000007fa000c7 <7> [606.794175] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K <7> [606.795010] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x76f03018 <7> [606.795474] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0 <7> [606.795853] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [606.796237] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [606.796598] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [606.806203] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300583 <7> [606.806611] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [606.806957] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [606.807340] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <6> [606.807568] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.807586] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.807592] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.807605] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.807625] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <7> [606.807728] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [606.808062] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb DIMMs: no <7> [606.808408] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [606.808711] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb DIMMs: no <7> [606.809011] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb DIMMs: no <7> [606.809324] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [606.809618] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb DIMMs: no <7> [606.809899] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [606.810344] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [606.810667] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [606.810983] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2134 tRP=15 tRDPRE=8 tRAS=35 tRCD=15 tRC=50 <7> [606.811395] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=2934 tRP=21 tRDPRE=12 tRAS=47 tRCD=21 tRC=68 <7> [606.811786] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=2401 tRP=17 tRDPRE=9 tRAS=39 tRCD=17 tRC=56 <7> [606.812170] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW0 / QGV 0: num_planes=4 deratedbw=9834 <7> [606.812549] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW0 / QGV 1: num_planes=4 deratedbw=9941 <7> [606.812935] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW0 / QGV 2: num_planes=4 deratedbw=9878 <7> [606.813333] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW1 / QGV 0: num_planes=2 deratedbw=14899 <7> [606.813710] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW1 / QGV 1: num_planes=2 deratedbw=16488 <7> [606.814072] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW1 / QGV 2: num_planes=2 deratedbw=15583 <7> [606.814460] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW2 / QGV 0: num_planes=1 deratedbw=20069 <7> [606.814853] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW2 / QGV 1: num_planes=1 deratedbw=23719 <7> [606.815251] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW2 / QGV 2: num_planes=1 deratedbw=21483 <7> [606.815622] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW3 / QGV 0: num_planes=1 deratedbw=24280 <7> [606.815988] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW3 / QGV 1: num_planes=1 deratedbw=25000 <7> [606.816364] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW3 / QGV 2: num_planes=1 deratedbw=25000 <7> [606.816728] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW4 / QGV 0: num_planes=1 deratedbw=25000 <7> [606.817119] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW4 / QGV 1: num_planes=1 deratedbw=25000 <7> [606.817512] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW4 / QGV 2: num_planes=1 deratedbw=25000 <7> [606.817878] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW5 / QGV 0: num_planes=1 deratedbw=25000 <7> [606.818256] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW5 / QGV 1: num_planes=1 deratedbw=25000 <7> [606.818620] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW5 / QGV 2: num_planes=1 deratedbw=25000 <7> [606.819745] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [606.820203] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT JASPERLAKE ", BDB version 228 <7> [606.820590] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [606.820962] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5) <7> [606.821381] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [606.821782] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [606.822179] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812) <7> [606.822557] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 30, min size 34) <7> [606.822917] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [606.823305] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [606.823696] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [606.824078] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 54, min size 78) <7> [606.824476] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [606.824842] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [606.825212] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [606.825586] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [606.825981] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [606.826377] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [606.826759] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [606.827132] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [606.827492] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [606.827856] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT DP max link rate: 810000 <7> [606.828264] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [606.828641] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7> [606.828999] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT DP max link rate: 810000 <7> [606.829369] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [606.829731] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0 <7> [606.830115] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT DP max link rate: 810000 <7> [606.830502] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 0a <7> [606.830899] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [606.831491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [606.831917] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 3 <7> [606.832326] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [606.832871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [606.833259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [606.833620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [606.834015] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [606.834436] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [606.834820] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [606.835217] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [606.835583] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [606.835951] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [606.836353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [606.836743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [606.837261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [606.837775] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/icl_dmc_ver1_09.bin <7> [606.838756] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [606.839171] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.839193] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.839198] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.839205] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [606.840291] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7> [606.840732] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <6> [606.840914] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.840929] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.840933] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.840938] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [606.841125] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <6> [606.841647] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9) <7> [606.841499] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [606.841878] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [606.842265] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [606.842625] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [606.842977] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [606.843359] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <6> [606.845872] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.845891] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.845896] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.845901] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.846130] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.846143] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.846148] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.846153] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [606.860722] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [606.866954] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 3 <7> [606.867536] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind <6> [606.867943] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) <7> [606.868358] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 556800 kHz <7> [606.868772] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1113600 kHz <7> [606.869281] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:238:DDI A/PHY A] Using AUX CH A (VBT) <7> [606.869680] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:238:DDI A/PHY A] <7> [606.875148] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [606.875555] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [606.875923] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [606.876310] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [606.876730] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [606.877129] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [606.877498] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [606.877862] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [606.878232] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [606.878602] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [606.879168] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:238:DDI A/PHY A] initial power sequencer: PPS 0 <7> [606.879629] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 0 t8 0 t9 0 t10 0 t11_t12 0 <3> [606.880138] atkbd serio0: Failed to enable keyboard on isa0060/serio0 <7> [606.879976] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [606.880337] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [606.880690] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [606.881052] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [606.881541] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [606.882054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [606.882761] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turning VDD on <7> [606.883160] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [606.883626] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [606.883996] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [606.884441] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [606.884799] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 panel power wasn't enabled <6> [606.886071] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.886091] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.886145] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.886152] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.888524] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.888540] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.888545] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.888550] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.912699] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.912727] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.912733] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.912740] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.936728] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.936770] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.936782] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.936795] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.979380] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:02:00.0 <4> [606.979428] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.979441] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.979453] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [606.989047] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [606.989089] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [606.989172] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [606.989185] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [607.021822] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.021864] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.021876] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.021888] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [607.060511] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.060553] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.060565] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.060577] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.089919] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 <7> [607.091045] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 quirks 0x0001 <7> [607.091873] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 b7 f6 <7> [607.094297] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [607.101948] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [607.103888] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [607.105807] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [607.108346] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [607.110192] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [607.112173] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [607.114020] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [607.115926] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <6> [607.117488] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.117520] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.117532] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.117545] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.117598] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [607.117627] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD monitor <7> [607.117647] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD size 20, SAD count 0 <7> [607.117875] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:239:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [607.118869] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:239:eDP-1] using alternate EDID fixed mode: "3200x1800": 52 361310 3200 3248 3280 3424 1800 1802 1807 2045 0x40 0xa <7> [607.119779] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:239:eDP-1] Performing OUI wait (30 ms) <6> [607.128684] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.128719] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.128731] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.128743] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.129173] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:239:eDP-1] DRRS type: none <6> [607.130177] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.130205] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.130216] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.130227] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.130577] i915 0000:00:02.0: [drm:get_vbt_pwm_freq.isra.0 [i915]] VBT defined backlight frequency 200 Hz <7> [607.131525] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:239:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [607.132433] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:239:eDP-1] backlight initialized, disabled, brightness 0/96000 <7> [607.133602] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [607.134637] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [607.135531] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [607.136394] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [607.137241] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [607.138239] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [607.140537] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:247:DDI B/PHY B] Using AUX CH B (VBT) <7> [607.141476] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:247:DDI B/PHY B] <7> [607.143421] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [607.144367] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:247:DDI B/PHY B] <7> [607.145282] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:247:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7> [607.146757] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:262:DDI C (TC)/PHY C] <7> [607.147646] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:262:DDI C (TC)/PHY C] Using DDC pin 0x3 (VBT) <7> [607.150458] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:98:pipe A] hw state readout: disabled <7> [607.151688] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:167:pipe B] hw state readout: disabled <7> [607.152853] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:236:pipe C] hw state readout: disabled <7> [607.153772] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [607.154712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7> [607.155736] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7> [607.156638] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7> [607.157447] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <6> [607.158278] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.158307] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.158317] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.158329] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.158409] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 6A] hw state readout: disabled, pipe A <7> [607.159234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 7A] hw state readout: disabled, pipe A <7> [607.160002] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:cursor A] hw state readout: disabled, pipe A <7> [607.160815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 1B] hw state readout: disabled, pipe B <7> [607.161616] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 2B] hw state readout: disabled, pipe B <7> [607.162431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 3B] hw state readout: disabled, pipe B <7> [607.163260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:plane 4B] hw state readout: disabled, pipe B <7> [607.163975] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 5B] hw state readout: disabled, pipe B <7> [607.164704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 6B] hw state readout: disabled, pipe B <7> [607.165433] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 7B] hw state readout: disabled, pipe B <7> [607.166320] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:cursor B] hw state readout: disabled, pipe B <7> [607.167028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 1C] hw state readout: disabled, pipe C <7> [607.167773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:plane 2C] hw state readout: disabled, pipe C <7> [607.168505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:187:plane 3C] hw state readout: disabled, pipe C <7> [607.169233] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:196:plane 4C] hw state readout: disabled, pipe C <7> [607.169929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:205:plane 5C] hw state readout: disabled, pipe C <7> [607.170659] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:214:plane 6C] hw state readout: disabled, pipe C <7> [607.171327] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:223:plane 7C] hw state readout: disabled, pipe C <7> [607.171954] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:232:cursor C] hw state readout: disabled, pipe C <7> [607.172615] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:238:DDI A/PHY A] hw state readout: disabled, pipe A <7> [607.173292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DDI B/PHY B] hw state readout: disabled, pipe A <7> [607.173907] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST A] hw state readout: disabled, pipe A <7> [607.174533] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:250:DP-MST B] hw state readout: disabled, pipe B <7> [607.175050] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:251:DP-MST C] hw state readout: disabled, pipe C <7> [607.175596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI C (TC)/PHY C] hw state readout: disabled, pipe A <7> [607.176168] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [607.176733] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [607.177361] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [607.178047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:239:eDP-1] hw state readout: disabled <7> [607.178659] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:248:DP-1] hw state readout: disabled <7> [607.179256] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7> [607.179805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:HDMI-A-2] hw state readout: disabled <7> [607.180371] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [607.180886] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7> [607.181411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7> [607.181833] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7> [607.182273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7> [607.182685] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 6A] min_cdclk 0 kHz <7> [607.183073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 7A] min_cdclk 0 kHz <7> [607.183482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:cursor A] min_cdclk 0 kHz <7> [607.183873] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [607.184331] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 1B] min_cdclk 0 kHz <7> [607.184744] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 2B] min_cdclk 0 kHz <7> [607.185167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 3B] min_cdclk 0 kHz <7> [607.185563] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:plane 4B] min_cdclk 0 kHz <7> [607.185946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 5B] min_cdclk 0 kHz <7> [607.186353] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 6B] min_cdclk 0 kHz <7> [607.186767] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 7B] min_cdclk 0 kHz <7> [607.187202] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:cursor B] min_cdclk 0 kHz <7> [607.187601] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [607.188021] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 1C] min_cdclk 0 kHz <7> [607.188456] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:plane 2C] min_cdclk 0 kHz <7> [607.188818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:187:plane 3C] min_cdclk 0 kHz <7> [607.189213] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:196:plane 4C] min_cdclk 0 kHz <7> [607.189577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:205:plane 5C] min_cdclk 0 kHz <7> [607.189925] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:214:plane 6C] min_cdclk 0 kHz <7> [607.190290] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:223:plane 7C] min_cdclk 0 kHz <7> [607.190637] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:232:cursor C] min_cdclk 0 kHz <7> [607.190978] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [607.215178] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [setup_hw_state] <7> [607.215601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:167:pipe B] enable: no [setup_hw_state] <7> [607.215964] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:236:pipe C] enable: no [setup_hw_state] <7> [607.216350] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:98:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [607.216759] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:167:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [607.217162] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:236:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [607.217980] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [607.218323] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [607.218667] MCR Steering: Default steering: group=0x0, instance=0x0 <7> [607.218694] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 9 GT workarounds on global <6> [607.219953] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.219972] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.219977] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.219983] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.221462] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 engine workarounds on rcs'0 <7> [607.221877] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0 <7> [607.222269] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 context workarounds on rcs'0 <7> [607.225122] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0 <6> [607.225877] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.225895] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.225899] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.225905] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.226637] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on vcs'0 <7> [607.227633] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0 <6> [607.231448] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.231468] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.231473] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.231478] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.248499] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:98:pipe A] not active, skipping <6> [607.248948] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.248968] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.248973] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.248979] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.249220] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:167:pipe B] not active, skipping <7> [607.249630] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:236:pipe C] not active, skipping <7> [607.250007] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [607.250435] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [607.252048] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [607.252432] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [607.252746] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [607.253051] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [607.259327] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:239:eDP-1] backlight device intel_backlight registered <7> [607.259934] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [607.262456] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:239:eDP-1] generating connector hotplug event <7> [607.263531] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <6> [607.264115] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.264133] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.264138] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.264144] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.266036] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:248:DP-1] generating connector hotplug event <7> [607.266812] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7> [607.267534] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:HDMI-A-2] generating connector hotplug event <6> [607.267629] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [607.271731] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <6> [607.286050] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.286070] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.286076] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.286081] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [607.289510] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.289530] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.289535] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.289541] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [607.303229] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [607.304447] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.304466] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.304471] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.304477] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [607.310573] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input66 <6> [607.311673] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0) <7> [607.313820] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x4810 (init value 0x4810) <7> [607.314994] [drm:drm_client_modeset_probe] <7> [607.315067] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] <7> [607.315085] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:239:eDP-1] <7> [607.316765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [607.321154] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:238:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [607.321596] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [607.321962] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [607.325125] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [607.325580] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [607.325596] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD monitor <7> [607.325606] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD size 20, SAD count 0 <7> [607.325644] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] VRR capable: no <6> [607.326073] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.326122] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.326129] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.326135] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.326016] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [607.327525] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [607.327965] i915 device info: pciid=0x4e51 rev=0x01 platform=JASPERLAKE (subplatform=0x0) gen=11 <7> [607.327972] i915 device info: graphics version: 11 <7> [607.327976] i915 device info: media version: 11 <7> [607.327980] i915 device info: graphics stepping: B0 <7> [607.327984] i915 device info: media stepping: B0 <7> [607.327987] i915 device info: display stepping: B0 <7> [607.327991] i915 device info: base die stepping: * <7> [607.327994] i915 device info: gt: 0 <7> [607.327998] i915 device info: memory-regions: 0x21 <7> [607.328001] i915 device info: page-sizes: 0x211000 <7> [607.328005] i915 device info: platform: JASPERLAKE <7> [607.328008] i915 device info: ppgtt-size: 36 <7> [607.328012] i915 device info: ppgtt-type: 2 <7> [607.328015] i915 device info: dma_mask_size: 39 <7> [607.328019] i915 device info: is_mobile: no <7> [607.328022] i915 device info: is_lp: no <7> [607.328026] i915 device info: require_force_probe: no <7> [607.328029] i915 device info: is_dgfx: no <7> [607.328033] i915 device info: has_64bit_reloc: yes <7> [607.328036] i915 device info: has_64k_pages: no <7> [607.328039] i915 device info: gpu_reset_clobbers_display: no <7> [607.328043] i915 device info: has_reset_engine: yes <7> [607.328046] i915 device info: has_3d_pipeline: yes <7> [607.328049] i915 device info: has_4tile: no <7> [607.328053] i915 device info: has_flat_ccs: no <7> [607.328056] i915 device info: has_global_mocs: no <7> [607.328059] i915 device info: has_gmd_id: no <7> [607.328062] i915 device info: has_gt_uc: yes <7> [607.328066] i915 device info: has_heci_pxp: no <7> [607.328069] i915 device info: has_heci_gscfi: no <7> [607.328072] i915 device info: has_guc_deprivilege: no <7> [607.328076] i915 device info: has_l3_ccs_read: no <7> [607.328079] i915 device info: has_l3_dpf: no <7> [607.328082] i915 device info: has_llc: yes <7> [607.328085] i915 device info: has_logical_ring_contexts: yes <7> [607.328089] i915 device info: has_logical_ring_elsq: yes <7> [607.328134] i915 device info: has_media_ratio_mode: no <7> [607.328138] i915 device info: has_mslice_steering: no <7> [607.328142] i915 device info: has_oa_bpc_reporting: no <7> [607.328145] i915 device info: has_oa_slice_contrib_limits: no <7> [607.328149] i915 device info: has_oam: no <7> [607.328152] i915 device info: has_one_eu_per_fuse_bit: no <7> [607.328155] i915 device info: has_pxp: no <7> [607.328158] i915 device info: has_rc6: yes <7> [607.328162] i915 device info: has_rc6p: no <7> [607.328165] i915 device info: has_rps: yes <7> [607.328168] i915 device info: has_runtime_pm: yes <7> [607.328171] i915 device info: has_snoop: no <7> [607.328175] i915 device info: has_coherent_ggtt: no <7> [607.328178] i915 device info: tuning_thread_rr_after_dep: no <7> [607.328181] i915 device info: unfenced_needs_alignment: no <7> [607.328185] i915 device info: hws_needs_physical: no <7> [607.328188] i915 device info: has_pooled_eu: no <7> [607.328191] i915 device info: rawclk rate: 19200 kHz <7> [607.328196] i915 device info: display version: 11 <7> [607.328200] i915 device info: cursor_needs_physical: no <7> [607.328203] i915 device info: has_cdclk_crawl: no <7> [607.328206] i915 device info: has_cdclk_squash: no <7> [607.328209] i915 device info: has_ddi: yes <7> [607.328213] i915 device info: has_dp_mst: yes <7> [607.328216] i915 device info: has_dsb: no <7> [607.328219] i915 device info: has_fpga_dbg: yes <7> [607.328223] i915 device info: has_gmch: no <7> [607.328226] i915 device info: has_hotplug: yes <7> [607.328229] i915 device info: has_hti: no <7> [607.328233] i915 device info: has_ipc: yes <7> [607.328236] i915 device info: has_overlay: no <7> [607.328239] i915 device info: has_psr: yes <7> [607.328242] i915 device info: has_psr_hw_tracking: yes <7> [607.328246] i915 device info: overlay_needs_physical: no <7> [607.328249] i915 device info: supports_tv: no <7> [607.328253] i915 device info: has_hdcp: no <7> [607.328256] i915 device info: has_dmc: yes <7> [607.328259] i915 device info: has_dsc: yes <7> [607.328068] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [607.328263] i915 device info: iommu: enabled <7> [607.328266] i915 device info: available engines: 40403 <7> [607.328270] i915 device info: slice total: 1, mask=0001 <7> [607.328274] i915 device info: subslice total: 4 <7> [607.328277] i915 device info: slice0: 4 subslices, mask=0000000f <7> [607.328280] i915 device info: EU total: 16 <7> [607.328283] i915 device info: EU per subslice: 4 <7> [607.328286] i915 device info: has slice power gating: yes <7> [607.328289] i915 device info: has subslice power gating: yes <7> [607.328292] i915 device info: has EU power gating: yes <6> [607.328295] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [607.328299] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [607.328302] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [607.329006] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [607.330849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [607.331717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [607.333651] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] status updated from unknown to connected <7> [607.334450] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] probed modes : <7> [607.334464] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [607.334475] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 52 361310 3200 3248 3280 3424 1800 1802 1807 2045 0x40 0xa <7> [607.334487] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] <7> [607.334501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:248:DP-1] <7> [607.336183] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] status updated from unknown to disconnected <7> [607.336214] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] disconnected <7> [607.336239] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7> [607.336253] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7> [607.336719] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7> [607.336744] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7> [607.336764] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] <7> [607.336775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2] <7> [607.337477] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] status updated from unknown to disconnected <7> [607.337505] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected <7> [607.337526] [drm:drm_client_modeset_probe] connector 239 enabled? yes <7> [607.337536] [drm:drm_client_modeset_probe] connector 248 enabled? no <7> [607.337543] [drm:drm_client_modeset_probe] connector 257 enabled? no <7> [607.337549] [drm:drm_client_modeset_probe] connector 263 enabled? no <7> [607.337626] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [607.337649] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 239 <7> [607.337657] [drm:drm_client_modeset_probe] looking for preferred mode on connector 239 0 <7> [607.337664] [drm:drm_client_modeset_probe] found mode 3200x1800 <7> [607.337670] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [607.337693] [drm:drm_client_modeset_probe] desired mode 3200x1800 set on crtc 98 (0,0) <7> [607.337733] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [607.337865] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <6> [607.350917] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0) <7> [607.358446] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 3200x1800 fb: 0x00100000 <6> [607.365267] fbcon: i915drmfb (fb0) is primary device <6> [607.366757] Console: switching to colour frame buffer device 400x112 <6> [607.366786] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [607.373175] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7> [607.373193] [drm:drm_client_modeset_probe] <7> [607.373256] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] <7> [607.373274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:239:eDP-1] <7> [607.375593] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:238:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [607.376005] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [607.377720] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <6> [607.378264] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.378283] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.378288] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.378294] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.378143] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [607.378568] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [607.378584] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD monitor <7> [607.378594] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD size 20, SAD count 0 <7> [607.378631] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] VRR capable: no <7> [607.379008] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [607.382204] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [607.382621] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [607.384186] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] probed modes : <7> [607.384203] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [607.384214] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 52 361310 3200 3248 3280 3424 1800 1802 1807 2045 0x40 0xa <7> [607.384226] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] <7> [607.384239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:248:DP-1] <7> [607.385429] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] disconnected <7> [607.385449] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7> [607.385461] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7> [607.385875] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7> [607.385889] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] <7> [607.385899] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2] <7> [607.386840] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected <7> [607.386856] [drm:drm_client_modeset_probe] connector 239 enabled? yes <7> [607.386865] [drm:drm_client_modeset_probe] connector 248 enabled? no <7> [607.386871] [drm:drm_client_modeset_probe] connector 257 enabled? no <7> [607.386960] [drm:drm_client_modeset_probe] connector 263 enabled? no <7> [607.387032] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [607.387052] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 239 <7> [607.387060] [drm:drm_client_modeset_probe] looking for preferred mode on connector 239 0 <7> [607.387066] [drm:drm_client_modeset_probe] found mode 3200x1800 <7> [607.387073] [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [607.387335] [drm:drm_client_modeset_probe] desired mode 3200x1800 set on crtc 98 (0,0) <7> [607.389997] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:239:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [607.390447] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 24 pixel clock 361310KHz <7> [607.390755] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 24 <7> [607.391057] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1083930 available 2160000 <7> [607.391616] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:239:eDP-1] SDP split enable: no <7> [607.391920] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] PSR condition failed: PSR setup time (330 us) too long <7> [607.392414] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:98:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [607.392736] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:238:DDI A/PHY A] [CRTC:98:pipe A] <7> [607.393040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [607.393591] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [607.393909] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [607.394356] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [607.394677] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4209566/8388608 link 350797/524288) <7> [607.394987] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [607.395498] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [607.395824] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [607.396339] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3316) <7> [607.396657] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [607.396974] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3316) <7> [607.397500] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [607.397816] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [607.398280] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [607.398592] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1816) <7> [607.398899] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [607.399402] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1816) <7> [607.399726] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1802) <7> [607.400040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1807) <6> [607.400356] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <7> [607.400650] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [607.400977] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3316) <7> [607.401484] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [607.401807] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3316) <7> [607.402334] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [607.402655] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [607.402965] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [607.403449] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1816) <7> [607.403756] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [607.404060] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1816) <7> [607.404564] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1802) <7> [607.404874] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1807) <7> [607.405368] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [607.405691] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [607.406004] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [607.406500] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in dpll_hw_state.cfgcr1 (expected 0x00000000, found 0x0000004b) <7> [607.406812] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in dpll_hw_state.cfgcr0 (expected 0x00000000, found 0x00e001a5) <7> [607.407311] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [607.407621] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 361310) <7> [607.407928] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 361310) <7> [607.408421] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [607.408739] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [607.409569] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 1024), active pipes 0x0 -> 0x1 <7> [607.409929] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 985), size 0 -> 985 <7> [607.410406] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb ( 0 - 0) -> ( 985 - 1024), size 0 -> 39 <7> [607.410726] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,*twm, swm, stwm <7> [607.411049] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [607.411581] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 26, 79, 105, 105, 183, 235, 261, 287, 40, 0, 0 <7> [607.411889] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 88, 117, 117, 203, 260, 289, 317, 41, 0, 0 <7> [607.412409] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1445240 num active planes 1 <7> [607.412736] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 1446 <7> [607.413052] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 23719 required 1446 <7> [607.413562] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 21483 required 1446 <7> [607.413919] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (180655 kHz) > [CRTC:98:pipe A] min cdclk (0 kHz) <7> [607.414467] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (22582 kHz) > old min cdclk (0 kHz) <7> [607.414825] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [607.415373] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [607.415711] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 1, actual 1 <7> [607.416033] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:98:pipe A] allocated DPLL 0 <7> [607.416369] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:98:pipe A] reserving DPLL 0 <7> [607.416689] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: yes [modeset] <7> [607.417017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <6> [607.417469] [IGT] i915_suspend: finished subtest basic-s3-without-i915, SUCCESS <7> [607.417357] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [607.417632] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [607.417668] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [607.417966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <6> [607.418700] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0) <7> [607.421293] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [607.421646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [607.421959] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 4209566, data_n: 8388608, link_m: 350797, link_n: 524288, tu: 64 <7> [607.425125] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [607.425496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [607.425814] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [607.426384] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [607.426711] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [607.427025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [607.430150] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa <7> [607.430526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x40 0xa <7> [607.430855] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa <7> [607.431445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 361310 <7> [607.431771] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 74, ips linetime: 0 <7> [607.432085] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [607.432425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [607.432736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [607.433048] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x4b, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [607.434626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [607.434968] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [607.435520] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [607.435835] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [607.436279] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [607.436592] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [607.442120] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [607.442496] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [607.442819] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [607.443376] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [607.443702] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [607.444011] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [607.444502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:240] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [607.444824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [607.445273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [607.445674] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [607.445985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [607.449119] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [607.449490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [607.449809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no <7> [607.450161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no <7> [607.450516] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no <7> [607.451548] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 192000 kHz, VCO 384000 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 1 <7> [607.455483] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DDI A/PHY A] <7> [607.455878] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DDI B/PHY B] <7> [607.456443] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST A] <7> [607.456747] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:250:DP-MST B] <7> [607.457044] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:251:DP-MST C] <7> [607.457596] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI C (TC)/PHY C] <7> [607.458256] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [607.459557] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [607.459927] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 4 <7> [607.462307] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:98:pipe A] <7> [607.462650] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [607.465807] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turn panel power on <7> [607.466361] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [607.466819] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [607.467392] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [607.467730] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 wait for panel power on <7> [607.468084] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <6> [607.491753] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.491774] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.491779] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.491784] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [607.531768] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.531788] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.531793] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.531798] nvme 0000:02:00.0: [ 0] RxErr (First) <6> [607.534822] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.534840] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.534844] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.534849] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.678445] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [607.679389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A <7> [607.685298] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 <7> [607.685423] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [607.686942] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [607.687956] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [607.690363] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0 <7> [607.691050] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0 <7> [607.693717] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] Clock recovery OK <7> [607.694437] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7> [607.696971] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 1/1/1/1 <7> [607.697714] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 1/1/1/1 <7> [607.700756] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [607.701497] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [607.702772] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [607.704639] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [607.705480] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [607.706663] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:239:eDP-1] set backlight PWM = 96000 <6> [607.715231] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.715269] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.715282] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.715295] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.715531] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23961600 bytes of contiguous stolen space for FBC, limit: 1 <6> [607.716620] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.716649] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.716661] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.716672] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.716528] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A] <7> [607.721997] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:239:eDP-1] <7> [607.722901] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A] <7> [607.725201] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:238:DDI A/PHY A] Fec status: 0 <7> [607.725930] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7> [607.726762] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [607.729169] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7> [607.729197] [drm:drm_client_modeset_probe] <7> [607.729426] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] <6> [607.729466] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7> [607.729459] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:239:eDP-1] <7> [607.730951] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:238:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [607.731440] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [607.731735] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [607.732477] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [607.732632] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [607.733182] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [607.733951] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [607.733981] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD monitor <7> [607.734003] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD size 20, SAD count 0 <7> [607.733695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [607.734077] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] VRR capable: no <7> [607.734802] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [607.735888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [607.739009] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [607.739680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <6> [607.740065] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0 <4> [607.740091] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) <4> [607.740217] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [607.740227] nvme 0000:02:00.0: [ 0] RxErr (First) <7> [607.740268] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x4810 <7> [607.741372] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] probed modes : <7> [607.741399] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [607.741420] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 52 361310 3200 3248 3280 3424 1800 1802 1807 2045 0x40 0xa <7> [607.741443] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] <7> [607.741467] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:248:DP-1] <7> [607.742266] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] disconnected <7> [607.742294] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7> [607.742315] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7> [607.742965] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7> [607.742988] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] <7> [607.743007] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2] <7> [607.743857] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected <7> [607.743880] [drm:drm_client_modeset_probe] connector 239 enabled? yes <7> [607.743896] [drm:drm_client_modeset_probe] connector 248 enabled? no <7> [607.743908] [drm:drm_client_modeset_probe] connector 257 enabled? no <7> [607.743920] [drm:drm_client_modeset_probe] connector 263 enabled? no <7> [607.744032] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [607.744072] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 239 <7> [607.744086] [drm:drm_client_modeset_probe] looking for preferred mode on connector 239 0 <6> [607.744153] [IGT] i915_suspend: exiting, ret=0 <7> [607.744281] [drm:drm_client_modeset_probe] found mode 3200x1800 <7> [607.744294] [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [607.744342] [drm:drm_client_modeset_probe] desired mode 3200x1800 set on crtc 98 (0,0) <7> [607.745522] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <6> [607.775793] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC700: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker <6> [607.775825] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <6> [607.775831] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) <6> [607.775837] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 <6> [607.775842] snd_hda_codec_realtek hdaudioC0D0: inputs: <6> [607.775847] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19

<6> [600.445345] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [600.445371] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [600.445379] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [600.473559] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [600.473592] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [600.473603] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [600.475843] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [600.475870] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [600.475879] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [600.519403] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [600.519425] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [600.519431] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [600.542594] [IGT] i915_suspend: starting subtest basic-s3-without-i915

<6> [600.580003] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [600.580027] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [600.580033] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [600.606992] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [600.607014] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [600.607020] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<4> [601.359034] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000

<6> [601.378400] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [601.378421] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [601.378426] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [601.418837] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [601.418862] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [601.418867] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [601.423347] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [601.423367] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [601.423372] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [601.445722] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [601.445764] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [601.445777] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<4> [602.361054] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x200f0000

<4> [603.367032] snd_hda_intel 0000:00:1f.3: Codec #2 probe error; disabling it...

<6> [603.382471] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC700: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker

<6> [603.382497] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

<6> [603.382504] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)

<6> [603.382510] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0

<6> [603.382903] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [603.382924] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [603.382930] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [603.394014] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [603.394034] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [603.394039] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [603.413199] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turning VDD off

<7> [603.414087] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067

<6> [604.158450] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0)

<6> [604.176029] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input64

<6> [604.179256] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.179293] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.179299] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.187196] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input65

<7> [604.194958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [604.195452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [604.195853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [604.196194] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [604.196509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [604.409887] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<6> [604.423457] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.423493] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.423505] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.424098] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.424124] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.424135] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.424171] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<6> [604.439650] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.439767] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.439780] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [604.480824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [604.481612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [604.482833] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [604.483630] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [604.484460] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [604.485321] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [604.486128] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [604.487002] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [604.487782] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [604.488519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [604.489328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [604.492541] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [604.493388] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [604.494828] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [604.495586] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [604.496372] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4209566/8388608 link 350797/524288, found tu 0, data 0/0 link 0/0)

<7> [604.497164] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [604.497973] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [604.498747] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [604.499473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3316, found 0)

<7> [604.500426] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [604.501293] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3316, found 0)

<7> [604.502172] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [604.503203] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [604.504127] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [604.504900] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1816, found 0)

<7> [604.505631] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [604.506834] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1816, found 0)

<7> [604.507553] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1802, found 0)

<7> [604.508314] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1807, found 0)

<7> [604.509304] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [604.510090] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3316, found 0)

<7> [604.511032] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [604.511804] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3316, found 0)

<7> [604.512858] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [604.513580] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [604.514349] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [604.515115] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1816, found 0)

<6> [604.516059] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.516094] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.516107] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [604.515861] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [604.516590] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1816, found 0)

<7> [604.517370] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1802, found 0)

<7> [604.518058] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1807, found 0)

<7> [604.518842] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [604.519476] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [604.520159] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [604.520826] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [604.521456] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 361310, found 0)

<7> [604.522153] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 361310, found 0)

<7> [604.522840] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [604.523470] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [604.524140] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:98:pipe A] releasing DPLL 0

<7> [604.524796] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 1024) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [604.525415] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 985) -> ( 0 - 0), size 985 -> 0

<7> [604.525914] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb ( 985 - 1024) -> ( 0 - 0), size 39 -> 0

<7> [604.526376] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [604.526858] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [604.527317] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 26, 79, 105, 105, 183, 235, 261, 287, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [604.527799] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 30, 88, 117, 117, 203, 260, 289, 317, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [604.528281] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0

<7> [604.528801] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0

<7> [604.529295] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 23719 required 0

<7> [604.529807] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 21483 required 0

<7> [604.530357] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<6> [604.530727] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.530750] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.530757] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [604.530863] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [604.531347] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [604.531784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [modeset]

<7> [604.532153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [604.532511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [604.532902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [604.533266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [604.533617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [604.534035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no

<7> [604.534408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no

<7> [604.534799] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no

<7> [604.540725] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<6> [604.548399] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.548419] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.548425] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.550948] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.550964] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.550970] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.556931] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.556945] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.556949] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.586329] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.586354] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.586359] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.626450] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.626493] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.626505] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.659251] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.659294] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.659306] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.660961] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.660991] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.661002] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.662629] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.662699] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.662709] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.692640] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.692756] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.692769] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.699968] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.700011] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.700023] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.704810] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.704842] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.704853] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.712149] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.712191] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.712203] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.739732] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.739776] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.739789] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.742370] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.742398] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.742409] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [604.746815] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:239:eDP-1] set backlight PWM = 0

<7> [604.748200] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<6> [604.749397] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.749425] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.749436] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.750114] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.750136] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.750146] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [604.754603] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turning VDD on

<7> [604.755761] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [604.758964] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turn panel power off

<7> [604.759779] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [604.760538] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<6> [604.762040] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.762069] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.762079] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.764819] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.764851] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.764863] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [604.766439] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [604.767236] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:238:DDI A/PHY A] - long

<7> [604.768032] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [604.769099] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:238:DDI A/PHY A]

<7> [604.787358] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [604.787968] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:238:DDI A/PHY A] - long

<7> [604.788539] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [604.789116] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:238:DDI A/PHY A]

<6> [604.793042] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.793076] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.793088] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.793473] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.793495] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.793505] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.799948] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.799972] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.799980] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [604.814026] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [604.814870] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [604.814944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A

<7> [604.815640] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:238:DDI A/PHY A] - long

<7> [604.816380] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 30

<7> [604.816639] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:98:pipe A]

<7> [604.817521] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:238:DDI A/PHY A]

<7> [604.818282] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [604.819110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [604.819892] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]

<7> [604.821094] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [604.822533] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DDI A/PHY A]

<7> [604.823325] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DDI B/PHY B]

<7> [604.824046] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST A]

<7> [604.824763] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:250:DP-MST B]

<7> [604.825456] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:251:DP-MST C]

<7> [604.826188] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI C (TC)/PHY C]

<7> [604.826906] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:239:eDP-1]

<7> [604.827686] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [604.828422] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [604.829264] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 4

<7> [604.830190] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A]

<6> [604.838779] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.838815] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.838827] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.867937] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.867975] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.867987] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.872977] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.873010] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.873021] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [604.875355] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<6> [604.878414] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.878447] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.878458] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.900376] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.900418] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.900431] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.903998] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.904030] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.904042] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.904976] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.905002] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.905012] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.906223] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.906254] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.906267] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.915179] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.915214] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.915226] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.916148] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.916175] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.916187] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.926267] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.926301] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.926313] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.931967] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.931997] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.932007] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.934367] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.934395] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.934404] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.942364] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.942391] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.942400] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.948170] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.948193] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.948200] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.949067] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.949082] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.949088] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.955407] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.955429] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.955433] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.965027] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.965045] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.965050] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [604.971749] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<7> [604.972426] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 wait for panel power cycle

<6> [604.978808] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.978826] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.978831] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [604.984030] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [604.984047] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [604.984052] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [605.000312] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [605.000338] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [605.000344] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [605.002246] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [605.002281] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [605.002291] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [605.011451] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [605.011490] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [605.011501] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [605.018100] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [605.018150] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [605.018162] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [605.021203] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [605.021233] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [605.021245] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [605.419196] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [605.420057] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [605.925048] Freezing user space processes completed (elapsed 0.002 seconds)

<6> [605.926359] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)

<6> [605.942163] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [605.942185] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [605.942192] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [605.962938] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [605.962973] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [605.962986] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [605.967562] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [605.967590] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [605.967603] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [605.985828] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [605.985847] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [605.985853] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [605.997189] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [605.997205] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [605.997210] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [605.997407] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [605.997417] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [605.997421] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.008549] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.008583] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.008595] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.010069] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.010102] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.010114] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.030951] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.030984] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.030997] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.042901] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.042935] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.042947] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [606.043489] PM: suspend of devices complete after 88.541 msecs

<7> [606.043506] PM: start suspend of devices complete after 116.913 msecs

<7> [606.050233] PM: late suspend of devices complete after 6.715 msecs

<7> [606.081028] PM: noirq suspend of devices complete after 29.580 msecs

<6> [606.081058] ACPI: PM: Preparing to enter system sleep state S3

<4> [606.190774] ACPI: button: The lid device is not compliant to SW_LID.

<7> [606.225744] PM: noirq resume of devices complete after 19.063 msecs

<7> [606.234973] PM: early resume of devices complete after 6.597 msecs

<6> [606.274286] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.274321] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.274333] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.287900] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.287941] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.287953] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.292397] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.292438] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.292450] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.295218] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.295259] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.295272] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.343727] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.343768] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.343780] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [606.406595] PM: resume of devices complete after 171.600 msecs

<6> [606.412500] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0)

<6> [606.477253] pcieport 0000:00:1c.0: bridge window [io 0x3000-0x3fff]

<6> [606.477265] pcieport 0000:00:1c.0: bridge window [mem 0x7fd00000-0x7fdfffff]

<6> [606.478231] pcieport 0000:00:1c.4: bridge window [mem 0x7fc00000-0x7fcfffff]

<6> [606.490547] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.490567] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.490573] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.494387] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.494408] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.494413] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<3> [606.497370] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0

<6> [606.504648] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.504669] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.504674] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.506918] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.506936] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.506941] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.549170] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0)

<6> [606.574853] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.574874] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.574880] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.581628] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.581648] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.581653] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.605575] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.605598] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.605603] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.608436] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0)

<6> [606.633849] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.633870] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.633876] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.638935] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.638955] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.638960] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.640136] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.640151] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.640156] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.663853] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.663873] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.663879] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.690550] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.690573] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.690581] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [606.786855] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K

<7> [606.787398] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [606.787801] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Jasper Lake PCH

<7> [606.788222] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [606.788824] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [606.789258] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 19200 kHz

<7> [606.790595] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0001, instances: 0001

<7> [606.790939] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001

<7> [606.791906] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<6> [606.792288] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.792306] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.792311] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [606.792280] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [606.792582] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M

<6> [606.792878] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [606.793737] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [606.793777] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x000000007fa000c7

<7> [606.794175] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K

<7> [606.795010] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x76f03018

<7> [606.795474] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0

<7> [606.795853] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [606.796237] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [606.796598] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [606.806203] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300583

<7> [606.806611] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [606.806957] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [606.807340] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<6> [606.807568] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.807586] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.807592] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.807625] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<7> [606.807728] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [606.808062] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb DIMMs: no

<7> [606.808408] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [606.808711] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb DIMMs: no

<7> [606.809011] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb DIMMs: no

<7> [606.809324] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [606.809618] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb DIMMs: no

<7> [606.809899] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [606.810344] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [606.810667] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [606.810983] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2134 tRP=15 tRDPRE=8 tRAS=35 tRCD=15 tRC=50

<7> [606.811395] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=2934 tRP=21 tRDPRE=12 tRAS=47 tRCD=21 tRC=68

<7> [606.811786] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=2401 tRP=17 tRDPRE=9 tRAS=39 tRCD=17 tRC=56

<7> [606.812170] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW0 / QGV 0: num_planes=4 deratedbw=9834

<7> [606.812549] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW0 / QGV 1: num_planes=4 deratedbw=9941

<7> [606.812935] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW0 / QGV 2: num_planes=4 deratedbw=9878

<7> [606.813333] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW1 / QGV 0: num_planes=2 deratedbw=14899

<7> [606.813710] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW1 / QGV 1: num_planes=2 deratedbw=16488

<7> [606.814072] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW1 / QGV 2: num_planes=2 deratedbw=15583

<7> [606.814460] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW2 / QGV 0: num_planes=1 deratedbw=20069

<7> [606.814853] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW2 / QGV 1: num_planes=1 deratedbw=23719

<7> [606.815251] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW2 / QGV 2: num_planes=1 deratedbw=21483

<7> [606.815622] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW3 / QGV 0: num_planes=1 deratedbw=24280

<7> [606.815988] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW3 / QGV 1: num_planes=1 deratedbw=25000

<7> [606.816364] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW3 / QGV 2: num_planes=1 deratedbw=25000

<7> [606.816728] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW4 / QGV 0: num_planes=1 deratedbw=25000

<7> [606.817119] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW4 / QGV 1: num_planes=1 deratedbw=25000

<7> [606.817512] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW4 / QGV 2: num_planes=1 deratedbw=25000

<7> [606.817878] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW5 / QGV 0: num_planes=1 deratedbw=25000

<7> [606.818256] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW5 / QGV 1: num_planes=1 deratedbw=25000

<7> [606.818620] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW5 / QGV 2: num_planes=1 deratedbw=25000

<7> [606.819745] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [606.820203] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT JASPERLAKE ", BDB version 228

<7> [606.820590] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [606.820962] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5)

<7> [606.821381] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [606.821782] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [606.822179] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812)

<7> [606.822557] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 30, min size 34)

<7> [606.822917] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [606.823305] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [606.823696] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [606.824078] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 54, min size 78)

<7> [606.824476] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [606.824842] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [606.825212] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [606.825586] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [606.825981] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [606.826377] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [606.826759] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [606.827132] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [606.827492] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [606.827856] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT DP max link rate: 810000

<7> [606.828264] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [606.828641] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0

<7> [606.828999] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT DP max link rate: 810000

<7> [606.829369] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [606.829731] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0

<7> [606.830115] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT DP max link rate: 810000

<7> [606.830502] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 0a

<7> [606.830899] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [606.831491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [606.831917] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 3

<7> [606.832326] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [606.832871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [606.833259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [606.833620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [606.834015] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [606.834436] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [606.834820] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [606.835217] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [606.835583] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [606.835951] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [606.836353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [606.836743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [606.837261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [606.837775] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/icl_dmc_ver1_09.bin

<7> [606.838756] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [606.839171] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.839193] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.839198] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [606.840291] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us

<7> [606.840732] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<6> [606.840914] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.840929] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.840933] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [606.841125] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<6> [606.841647] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9)

<7> [606.841499] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [606.841878] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [606.842265] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [606.842625] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [606.842977] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [606.843359] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<6> [606.845872] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.845891] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.845896] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.846130] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.846143] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.846148] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [606.860722] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [606.866954] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 3

<7> [606.867536] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind

<6> [606.867943] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])

<7> [606.868358] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 556800 kHz

<7> [606.868772] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1113600 kHz

<7> [606.869281] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:238:DDI A/PHY A] Using AUX CH A (VBT)

<7> [606.869680] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:238:DDI A/PHY A]

<7> [606.875148] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [606.875555] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [606.875923] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [606.876310] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [606.876730] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [606.877129] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [606.877498] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [606.877862] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [606.878232] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [606.878602] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [606.879168] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:238:DDI A/PHY A] initial power sequencer: PPS 0

<7> [606.879629] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 0 t8 0 t9 0 t10 0 t11_t12 0

<3> [606.880138] atkbd serio0: Failed to enable keyboard on isa0060/serio0

<7> [606.879976] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [606.880337] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [606.880690] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [606.881052] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [606.881541] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [606.882054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [606.882761] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turning VDD on

<7> [606.883160] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [606.883626] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [606.883996] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [606.884441] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [606.884799] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 panel power wasn't enabled

<6> [606.886071] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.886091] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.886145] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.888524] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.888540] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.888545] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.912699] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.912727] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.912733] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.936728] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.936770] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.936782] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.979380] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:02:00.0

<4> [606.979428] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.979441] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [606.989047] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [606.989089] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [606.989172] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [607.021822] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.021864] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.021876] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [607.060511] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.060553] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.060565] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.089919] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00

<7> [607.091045] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 quirks 0x0001

<7> [607.091873] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 b7 f6

<7> [607.094297] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [607.101948] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [607.103888] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [607.105807] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [607.108346] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [607.110192] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [607.112173] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [607.114020] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [607.115926] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<6> [607.117488] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.117520] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.117532] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.117598] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [607.117627] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD monitor

<7> [607.117647] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD size 20, SAD count 0

<7> [607.117875] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:239:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [607.118869] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:239:eDP-1] using alternate EDID fixed mode: "3200x1800": 52 361310 3200 3248 3280 3424 1800 1802 1807 2045 0x40 0xa

<7> [607.119779] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:239:eDP-1] Performing OUI wait (30 ms)

<6> [607.128684] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.128719] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.128731] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.129173] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:239:eDP-1] DRRS type: none

<6> [607.130177] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.130205] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.130216] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.130577] i915 0000:00:02.0: [drm:get_vbt_pwm_freq.isra.0 [i915]] VBT defined backlight frequency 200 Hz

<7> [607.131525] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:239:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [607.132433] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:239:eDP-1] backlight initialized, disabled, brightness 0/96000

<7> [607.133602] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [607.134637] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [607.135531] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [607.136394] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [607.137241] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [607.138239] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [607.140537] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:247:DDI B/PHY B] Using AUX CH B (VBT)

<7> [607.141476] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:247:DDI B/PHY B]

<7> [607.143421] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [607.144367] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:247:DDI B/PHY B]

<7> [607.145282] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:247:DDI B/PHY B] Using DDC pin 0x2 (VBT)

<7> [607.146757] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:262:DDI C (TC)/PHY C]

<7> [607.147646] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:262:DDI C (TC)/PHY C] Using DDC pin 0x3 (VBT)

<7> [607.150458] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:98:pipe A] hw state readout: disabled

<7> [607.151688] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:167:pipe B] hw state readout: disabled

<7> [607.152853] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:236:pipe C] hw state readout: disabled

<7> [607.153772] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [607.154712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A

<7> [607.155736] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A

<7> [607.156638] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A

<7> [607.157447] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A

<6> [607.158278] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.158307] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.158317] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.158409] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 6A] hw state readout: disabled, pipe A

<7> [607.159234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 7A] hw state readout: disabled, pipe A

<7> [607.160002] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:cursor A] hw state readout: disabled, pipe A

<7> [607.160815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 1B] hw state readout: disabled, pipe B

<7> [607.161616] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 2B] hw state readout: disabled, pipe B

<7> [607.162431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 3B] hw state readout: disabled, pipe B

<7> [607.163260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:plane 4B] hw state readout: disabled, pipe B

<7> [607.163975] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 5B] hw state readout: disabled, pipe B

<7> [607.164704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 6B] hw state readout: disabled, pipe B

<7> [607.165433] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 7B] hw state readout: disabled, pipe B

<7> [607.166320] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:cursor B] hw state readout: disabled, pipe B

<7> [607.167028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 1C] hw state readout: disabled, pipe C

<7> [607.167773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:plane 2C] hw state readout: disabled, pipe C

<7> [607.168505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:187:plane 3C] hw state readout: disabled, pipe C

<7> [607.169233] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:196:plane 4C] hw state readout: disabled, pipe C

<7> [607.169929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:205:plane 5C] hw state readout: disabled, pipe C

<7> [607.170659] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:214:plane 6C] hw state readout: disabled, pipe C

<7> [607.171327] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:223:plane 7C] hw state readout: disabled, pipe C

<7> [607.171954] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:232:cursor C] hw state readout: disabled, pipe C

<7> [607.172615] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:238:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [607.173292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [607.173907] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST A] hw state readout: disabled, pipe A

<7> [607.174533] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:250:DP-MST B] hw state readout: disabled, pipe B

<7> [607.175050] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:251:DP-MST C] hw state readout: disabled, pipe C

<7> [607.175596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI C (TC)/PHY C] hw state readout: disabled, pipe A

<7> [607.176168] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [607.176733] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [607.177361] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [607.178047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:239:eDP-1] hw state readout: disabled

<7> [607.178659] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:248:DP-1] hw state readout: disabled

<7> [607.179256] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled

<7> [607.179805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:HDMI-A-2] hw state readout: disabled

<7> [607.180371] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [607.180886] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz

<7> [607.181411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz

<7> [607.181833] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz

<7> [607.182273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz

<7> [607.182685] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 6A] min_cdclk 0 kHz

<7> [607.183073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 7A] min_cdclk 0 kHz

<7> [607.183482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:cursor A] min_cdclk 0 kHz

<7> [607.183873] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [607.184331] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 1B] min_cdclk 0 kHz

<7> [607.184744] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 2B] min_cdclk 0 kHz

<7> [607.185167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 3B] min_cdclk 0 kHz

<7> [607.185563] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:plane 4B] min_cdclk 0 kHz

<7> [607.185946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 5B] min_cdclk 0 kHz

<7> [607.186353] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 6B] min_cdclk 0 kHz

<7> [607.186767] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 7B] min_cdclk 0 kHz

<7> [607.187202] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:cursor B] min_cdclk 0 kHz

<7> [607.187601] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [607.188021] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 1C] min_cdclk 0 kHz

<7> [607.188456] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:plane 2C] min_cdclk 0 kHz

<7> [607.188818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:187:plane 3C] min_cdclk 0 kHz

<7> [607.189213] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:196:plane 4C] min_cdclk 0 kHz

<7> [607.189577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:205:plane 5C] min_cdclk 0 kHz

<7> [607.189925] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:214:plane 6C] min_cdclk 0 kHz

<7> [607.190290] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:223:plane 7C] min_cdclk 0 kHz

<7> [607.190637] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:232:cursor C] min_cdclk 0 kHz

<7> [607.190978] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [607.215178] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [setup_hw_state]

<7> [607.215601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:167:pipe B] enable: no [setup_hw_state]

<7> [607.215964] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:236:pipe C] enable: no [setup_hw_state]

<7> [607.216350] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:98:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [607.216759] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:167:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [607.217162] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:236:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [607.217980] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [607.218323] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [607.218667] MCR Steering: Default steering: group=0x0, instance=0x0

<7> [607.218694] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 9 GT workarounds on global

<6> [607.219953] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.219972] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.219977] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.221462] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 engine workarounds on rcs'0

<7> [607.221877] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0

<7> [607.222269] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 context workarounds on rcs'0

<7> [607.225122] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0

<6> [607.225877] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.225895] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.225899] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.226637] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on vcs'0

<7> [607.227633] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0

<6> [607.231448] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.231468] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.231473] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.248499] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:98:pipe A] not active, skipping

<6> [607.248948] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.248968] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.248973] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.249220] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:167:pipe B] not active, skipping

<7> [607.249630] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:236:pipe C] not active, skipping

<7> [607.250007] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [607.252048] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [607.252432] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [607.252746] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [607.253051] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [607.259327] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:239:eDP-1] backlight device intel_backlight registered

<7> [607.259934] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [607.262456] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:239:eDP-1] generating connector hotplug event

<7> [607.263531] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<6> [607.264115] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.264133] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.264138] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.266036] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:248:DP-1] generating connector hotplug event

<7> [607.266812] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event

<7> [607.267534] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:HDMI-A-2] generating connector hotplug event

<6> [607.267629] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [607.271731] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<6> [607.286050] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.286070] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.286076] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [607.289510] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.289530] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.289535] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [607.303229] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [607.304447] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.304466] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.304471] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [607.310573] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input66

<6> [607.311673] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0)

<7> [607.313820] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x4810 (init value 0x4810)

<7> [607.315067] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1]

<7> [607.315085] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:239:eDP-1]

<7> [607.316765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [607.321154] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:238:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [607.321596] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [607.321962] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [607.325125] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [607.325580] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [607.325596] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD monitor

<7> [607.325606] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD size 20, SAD count 0

<7> [607.325644] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] VRR capable: no

<6> [607.326073] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.326122] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.326129] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.326016] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [607.327525] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [607.327965] i915 device info: pciid=0x4e51 rev=0x01 platform=JASPERLAKE (subplatform=0x0) gen=11

<7> [607.328068] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [607.328277] i915 device info: slice0: 4 subslices, mask=0000000f

<6> [607.328299] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [607.328302] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [607.329006] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [607.330849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [607.331717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [607.333651] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] status updated from unknown to connected

<7> [607.334450] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] probed modes :

<7> [607.334464] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [607.334475] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 52 361310 3200 3248 3280 3424 1800 1802 1807 2045 0x40 0xa

<7> [607.334487] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1]

<7> [607.334501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:248:DP-1]

<7> [607.336183] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] status updated from unknown to disconnected

<7> [607.336214] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] disconnected

<7> [607.336239] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1]

<7> [607.336253] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]

<7> [607.336719] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected

<7> [607.336744] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected

<7> [607.336764] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2]

<7> [607.336775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2]

<7> [607.337477] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] status updated from unknown to disconnected

<7> [607.337505] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected

<7> [607.337526] [drm:drm_client_modeset_probe] connector 239 enabled? yes

<7> [607.337536] [drm:drm_client_modeset_probe] connector 248 enabled? no

<7> [607.337543] [drm:drm_client_modeset_probe] connector 257 enabled? no

<7> [607.337549] [drm:drm_client_modeset_probe] connector 263 enabled? no

<7> [607.337626] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [607.337649] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 239

<7> [607.337657] [drm:drm_client_modeset_probe] looking for preferred mode on connector 239 0

<7> [607.337664] [drm:drm_client_modeset_probe] found mode 3200x1800

<7> [607.337670] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [607.337693] [drm:drm_client_modeset_probe] desired mode 3200x1800 set on crtc 98 (0,0)

<7> [607.337733] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [607.337865] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one

<6> [607.350917] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0)

<7> [607.358446] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 3200x1800 fb: 0x00100000

<6> [607.366757] Console: switching to colour frame buffer device 400x112

<6> [607.366786] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [607.373175] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]

<7> [607.373256] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1]

<7> [607.373274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:239:eDP-1]

<7> [607.375593] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:238:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [607.376005] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [607.377720] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<6> [607.378264] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.378283] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.378288] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.378143] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [607.378568] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [607.378584] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD monitor

<7> [607.378594] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD size 20, SAD count 0

<7> [607.378631] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] VRR capable: no

<7> [607.379008] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [607.382204] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [607.382621] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [607.384186] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] probed modes :

<7> [607.384203] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [607.384214] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 52 361310 3200 3248 3280 3424 1800 1802 1807 2045 0x40 0xa

<7> [607.384226] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1]

<7> [607.384239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:248:DP-1]

<7> [607.385429] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] disconnected

<7> [607.385449] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1]

<7> [607.385461] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]

<7> [607.385875] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected

<7> [607.385889] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2]

<7> [607.385899] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2]

<7> [607.386840] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected

<7> [607.386856] [drm:drm_client_modeset_probe] connector 239 enabled? yes

<7> [607.386865] [drm:drm_client_modeset_probe] connector 248 enabled? no

<7> [607.386871] [drm:drm_client_modeset_probe] connector 257 enabled? no

<7> [607.386960] [drm:drm_client_modeset_probe] connector 263 enabled? no

<7> [607.387032] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [607.387052] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 239

<7> [607.387060] [drm:drm_client_modeset_probe] looking for preferred mode on connector 239 0

<7> [607.387066] [drm:drm_client_modeset_probe] found mode 3200x1800

<7> [607.387073] [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [607.387335] [drm:drm_client_modeset_probe] desired mode 3200x1800 set on crtc 98 (0,0)

<7> [607.389997] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:239:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [607.390447] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 24 pixel clock 361310KHz

<7> [607.390755] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 24

<7> [607.391057] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1083930 available 2160000

<7> [607.391616] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:239:eDP-1] SDP split enable: no

<7> [607.391920] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] PSR condition failed: PSR setup time (330 us) too long

<7> [607.392414] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:98:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [607.392736] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:238:DDI A/PHY A] [CRTC:98:pipe A]

<7> [607.393040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [607.393591] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [607.393909] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [607.394356] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [607.394677] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4209566/8388608 link 350797/524288)

<7> [607.394987] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [607.395498] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [607.395824] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [607.396339] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3316)

<7> [607.396657] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [607.396974] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3316)

<7> [607.397500] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [607.397816] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [607.398280] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [607.398592] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1816)

<7> [607.398899] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [607.399402] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1816)

<7> [607.399726] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1802)

<7> [607.400040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1807)

<6> [607.400356] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100

<7> [607.400650] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [607.400977] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3316)

<7> [607.401484] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [607.401807] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3316)

<7> [607.402334] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [607.402655] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [607.402965] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [607.403449] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1816)

<7> [607.403756] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [607.404060] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1816)

<7> [607.404564] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1802)

<7> [607.404874] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1807)

<7> [607.405368] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [607.405691] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [607.406004] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [607.406500] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in dpll_hw_state.cfgcr1 (expected 0x00000000, found 0x0000004b)

<7> [607.406812] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in dpll_hw_state.cfgcr0 (expected 0x00000000, found 0x00e001a5)

<7> [607.407311] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [607.407621] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 361310)

<7> [607.407928] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 361310)

<7> [607.408421] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [607.408739] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [607.409569] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 1024), active pipes 0x0 -> 0x1

<7> [607.409929] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 985), size 0 -> 985

<7> [607.410406] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb ( 0 - 0) -> ( 985 - 1024), size 0 -> 39

<7> [607.410726] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [607.411049] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [607.411581] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 26, 79, 105, 105, 183, 235, 261, 287, 40, 0, 0

<7> [607.411889] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 88, 117, 117, 203, 260, 289, 317, 41, 0, 0

<7> [607.412409] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1445240 num active planes 1

<7> [607.412736] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 1446

<7> [607.413052] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 23719 required 1446

<7> [607.413562] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 21483 required 1446

<7> [607.413919] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (180655 kHz) > [CRTC:98:pipe A] min cdclk (0 kHz)

<7> [607.414467] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (22582 kHz) > old min cdclk (0 kHz)

<7> [607.414825] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [607.415373] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [607.415711] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 1, actual 1

<7> [607.416033] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:98:pipe A] allocated DPLL 0

<7> [607.416369] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:98:pipe A] reserving DPLL 0

<7> [607.416689] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: yes [modeset]

<7> [607.417017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<6> [607.417469] [IGT] i915_suspend: finished subtest basic-s3-without-i915, SUCCESS

<7> [607.417357] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [607.417668] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [607.417966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<6> [607.418700] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0)

<7> [607.421293] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [607.421646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [607.421959] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 4209566, data_n: 8388608, link_m: 350797, link_n: 524288, tu: 64

<7> [607.425125] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [607.425496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [607.425814] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [607.426384] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [607.426711] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [607.427025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [607.430150] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa

<7> [607.430526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x40 0xa

<7> [607.430855] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa

<7> [607.431445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 361310

<7> [607.431771] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 74, ips linetime: 0

<7> [607.432085] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [607.432425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [607.432736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [607.433048] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x4b, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [607.434626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [607.434968] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [607.435520] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [607.435835] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [607.436279] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [607.436592] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [607.442120] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [607.442496] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [607.442819] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [607.443376] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [607.443702] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [607.444011] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [607.444502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:240] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [607.444824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [607.445273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [607.445674] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [607.445985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [607.449119] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [607.449490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [607.449809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no

<7> [607.450161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no

<7> [607.450516] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no

<7> [607.451548] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 192000 kHz, VCO 384000 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 1

<7> [607.455483] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DDI A/PHY A]

<7> [607.455878] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DDI B/PHY B]

<7> [607.456443] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST A]

<7> [607.456747] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:250:DP-MST B]

<7> [607.457044] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:251:DP-MST C]

<7> [607.457596] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI C (TC)/PHY C]

<7> [607.458256] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [607.459557] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [607.459927] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 4

<7> [607.462307] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:98:pipe A]

<7> [607.462650] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [607.465807] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turn panel power on

<7> [607.466361] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [607.466819] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [607.467392] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [607.467730] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 wait for panel power on

<7> [607.468084] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<6> [607.491753] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.491774] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.491779] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [607.531768] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.531788] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.531793] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<6> [607.534822] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.534840] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.534844] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.678445] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [607.679389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A

<7> [607.685298] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00

<7> [607.685423] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [607.686942] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [607.687956] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [607.690363] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0

<7> [607.691050] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0

<7> [607.693717] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] Clock recovery OK

<7> [607.694437] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] Using DP training pattern TPS3

<7> [607.696971] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 1/1/1/1

<7> [607.697714] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 1/1/1/1

<7> [607.700756] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [607.701497] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:239:eDP-1][ENCODER:238:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [607.702772] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [607.704639] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [607.705480] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [607.706663] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:239:eDP-1] set backlight PWM = 96000

<6> [607.715231] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.715269] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.715282] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.715531] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23961600 bytes of contiguous stolen space for FBC, limit: 1

<6> [607.716620] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.716649] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.716661] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.716528] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]

<7> [607.721997] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:239:eDP-1]

<7> [607.722901] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A]

<7> [607.725201] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:238:DDI A/PHY A] Fec status: 0

<7> [607.725930] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<7> [607.726762] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [607.729169] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]

<7> [607.729426] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1]

<6> [607.729466] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

<7> [607.729459] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:239:eDP-1]

<7> [607.730951] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:238:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [607.731440] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<7> [607.731735] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [607.732477] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [607.733182] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [607.733951] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [607.733981] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD monitor

<7> [607.734003] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD size 20, SAD count 0

<7> [607.733695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [607.734077] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] VRR capable: no

<7> [607.734802] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [607.735888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [607.739009] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [607.739680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:239:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<6> [607.740065] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:02:00.0

<4> [607.740091] nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)

<4> [607.740217] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [607.740268] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x4810

<7> [607.741372] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] probed modes :

<7> [607.741399] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [607.741420] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 52 361310 3200 3248 3280 3424 1800 1802 1807 2045 0x40 0xa

<7> [607.741443] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1]

<7> [607.741467] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:248:DP-1]

<7> [607.742266] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] disconnected

<7> [607.742294] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1]

<7> [607.742315] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]

<7> [607.742965] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected

<7> [607.742988] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2]

<7> [607.743007] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2]

<7> [607.743857] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected

<7> [607.743880] [drm:drm_client_modeset_probe] connector 239 enabled? yes

<7> [607.743896] [drm:drm_client_modeset_probe] connector 248 enabled? no

<7> [607.743908] [drm:drm_client_modeset_probe] connector 257 enabled? no

<7> [607.743920] [drm:drm_client_modeset_probe] connector 263 enabled? no

<7> [607.744032] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [607.744072] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 239

<7> [607.744086] [drm:drm_client_modeset_probe] looking for preferred mode on connector 239 0

<7> [607.744281] [drm:drm_client_modeset_probe] found mode 3200x1800

<7> [607.744294] [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [607.744342] [drm:drm_client_modeset_probe] desired mode 3200x1800 set on crtc 98 (0,0)

<7> [607.745522] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<6> [607.775793] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC700: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker

<6> [607.775825] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

<6> [607.775831] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)

<6> [607.775837] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0

Results for igt@i915_suspend@basic-s3-without-i915