igt@i915_pm_rpm@basic-rte on fi-tgl-1115g4@linus-v6.6-rc2 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-g2aaeef0cd (x86_64) (Linux: 6.6.0-rc2-linus-v6.6-rc2-gce9ecca0238b+ x86_64)
Out	Starting subtest: basic-rte Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1e9/0x740 drm_ioctl_kernel+0xb4/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915] intel_runtime_suspend+0xec/0x2a0 [i915] pci_pm_runtime_suspend+0x5a/0x1a0 __rpm_callback+0x3c/0x110 rpm_callback+0x58/0x70 rpm_suspend+0x118/0x5f0 pm_runtime_work+0x9f/0xb0 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] hsw_get_pipe_config+0x155/0xb30 [i915] intel_crtc_get_pipe_config+0x1f/0x50 [i915] intel_modeset_verify_crtc+0xc7/0x4e0 [i915] intel_atomic_commit_tail+0x7b5/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x92/0xc0 Subtest basic-rte: SUCCESS (2.266s) i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1e9/0x740 drm_ioctl_kernel+0xb4/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915] intel_runtime_suspend+0xec/0x2a0 [i915] pci_pm_runtime_suspend+0x5a/0x1a0 __rpm_callback+0x3c/0x110 rpm_callback+0x58/0x70 rpm_suspend+0x118/0x5f0 pm_runtime_work+0x9f/0xb0 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_atomic_commit_tail+0xa2e/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1e9/0x740 drm_ioctl_kernel+0xb4/0x150
Err	Starting subtest: basic-rte Subtest basic-rte: SUCCESS (2.266s)
Dmesg	<6> [128.824545] Console: switching to colour dummy device 80x25 <6> [128.824833] [IGT] i915_pm_rpm: executing <6> [128.829547] [IGT] i915_pm_rpm: starting subtest basic-rte <7> [128.829603] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [128.830027] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:308:HDMI-A-1] <7> [128.830043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [128.856604] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [128.856619] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [128.856624] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [128.856629] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [128.856634] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [128.856639] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [128.856643] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [128.856648] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [128.856954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [128.857079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [128.857534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [128.857672] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [128.858248] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:308:HDMI-A-1] probed modes : <7> [128.858254] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [128.858258] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.858262] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.858265] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.858267] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.858270] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.858273] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.858276] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.858279] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.858282] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [128.858285] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [128.858287] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [128.858290] [drm:drm_mode_debug_printmodeline] Modeline "3440x1440": 90 476140 3440 3448 3480 3520 1440 1441 1449 1503 0x40 0xa <7> [128.858293] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 75 443250 2560 2768 3048 3536 1600 1603 1609 1672 0x40 0x6 <7> [128.858296] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 60 348500 2560 2752 3032 3504 1600 1603 1609 1658 0x40 0x6 <7> [128.858299] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 120 497770 2560 2608 2640 2720 1440 1443 1448 1525 0x40 0xa <7> [128.858302] [drm:drm_mode_debug_printmodeline] Modeline "2048x1536": 60 267027 2048 2200 2424 2800 1536 1537 1540 1589 0x0 0x6 <7> [128.858316] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 495000 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5 <7> [128.858321] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 494505 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5 <7> [128.858325] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 75 297000 1920 2064 2288 2640 1440 1441 1444 1500 0x40 0x6 <7> [128.858330] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6 <7> [128.858335] [drm:drm_mode_debug_printmodeline] Modeline "2160x1200": 90 261420 2160 2208 2240 2320 1200 1203 1208 1252 0x40 0xa <7> [128.858340] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 75 288000 1856 1984 2208 2560 1392 1393 1396 1500 0x40 0x6 <7> [128.858344] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 60 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6 <7> [128.858349] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 75 261000 1792 1888 2104 2456 1344 1345 1348 1417 0x40 0x6 <7> [128.858353] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 60 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6 <7> [128.858358] [drm:drm_mode_debug_printmodeline] Modeline "2048x1152": 60 162000 2048 2074 2154 2250 1152 1153 1156 1200 0x40 0x5 <7> [128.858364] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa <7> [128.858370] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 75 245250 1920 2056 2264 2608 1200 1203 1209 1255 0x40 0x6 <7> [128.858374] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6 <7> [128.858379] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [128.858384] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [128.858389] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6 <7> [128.858394] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [128.858398] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [128.858402] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 75 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [128.858407] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 70 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [128.858411] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 65 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [128.858416] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [128.858420] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6 <7> [128.858425] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [128.858429] [drm:drm_mode_debug_printmodeline] Modeline "1680x945": 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6 <7> [128.858434] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6 <7> [128.858439] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6 <7> [128.858443] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [128.858448] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [128.858453] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [128.858457] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 <7> [128.858462] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 <7> [128.858467] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [128.858471] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [128.858476] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5 <7> [128.858480] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6 <7> [128.858485] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [128.858490] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [128.858494] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x6 <7> [128.858499] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6 <7> [128.858503] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [128.858508] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [128.858513] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa <7> [128.858517] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.858522] [drm:drm_mode_debug_printmodeline] Modeline "1024x576": 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6 <7> [128.858526] [drm:drm_mode_debug_printmodeline] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [128.858531] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [128.858535] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 <7> [128.858540] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.858545] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.858549] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.858554] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [128.858559] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa <7> [128.858563] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.858568] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.858572] [drm:drm_mode_debug_printmodeline] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [128.858720] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:318:DP-1] <7> [128.858725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [128.858854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.858986] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.859145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.859284] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.859425] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:318:DP-1] disconnected <7> [128.859537] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:328:DP-2] <7> [128.859541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [128.859654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.859782] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.859939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.860063] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.860181] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:328:DP-2] disconnected <7> [128.860254] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:337:DP-3] <7> [128.860257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [128.860453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.860617] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.860796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.860923] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.861041] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:337:DP-3] disconnected <7> [128.861118] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:346:DP-4] <7> [128.861121] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [128.861232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.861381] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.861552] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.861678] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.861797] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:346:DP-4] disconnected <7> [128.876501] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:318:DP-1] <7> [128.876511] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [128.876709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.876905] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.877143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.877340] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.877515] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:318:DP-1] disconnected <7> [128.878390] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:328:DP-2] <7> [128.878396] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [128.878568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.878751] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.878976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.879153] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.879356] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:328:DP-2] disconnected <7> [128.880135] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:337:DP-3] <7> [128.880141] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [128.880319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.880505] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.880727] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.880902] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.881074] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:337:DP-3] disconnected <7> [128.881898] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:346:DP-4] <7> [128.881904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [128.882089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.882273] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.882491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.882668] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.882836] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:346:DP-4] disconnected <7> [128.883934] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:308:HDMI-A-1] <7> [128.883946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [128.910686] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [128.910696] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [128.910699] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [128.910702] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [128.910706] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [128.910709] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [128.910712] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [128.910716] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [128.911083] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [128.911206] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [128.911676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [128.911827] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [128.912478] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:308:HDMI-A-1] probed modes : <7> [128.912484] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [128.912488] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.912492] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.912495] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.912497] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.912500] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.912503] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.912506] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.912509] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [128.912512] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [128.912515] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [128.912517] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [128.912520] [drm:drm_mode_debug_printmodeline] Modeline "3440x1440": 90 476140 3440 3448 3480 3520 1440 1441 1449 1503 0x40 0xa <7> [128.912523] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 75 443250 2560 2768 3048 3536 1600 1603 1609 1672 0x40 0x6 <7> [128.912526] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 60 348500 2560 2752 3032 3504 1600 1603 1609 1658 0x40 0x6 <7> [128.912529] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 120 497770 2560 2608 2640 2720 1440 1443 1448 1525 0x40 0xa <7> [128.912532] [drm:drm_mode_debug_printmodeline] Modeline "2048x1536": 60 267027 2048 2200 2424 2800 1536 1537 1540 1589 0x0 0x6 <7> [128.912535] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 495000 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5 <7> [128.912537] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 494505 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5 <7> [128.912540] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 75 297000 1920 2064 2288 2640 1440 1441 1444 1500 0x40 0x6 <7> [128.912543] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6 <7> [128.912546] [drm:drm_mode_debug_printmodeline] Modeline "2160x1200": 90 261420 2160 2208 2240 2320 1200 1203 1208 1252 0x40 0xa <7> [128.912549] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 75 288000 1856 1984 2208 2560 1392 1393 1396 1500 0x40 0x6 <7> [128.912552] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 60 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6 <7> [128.912555] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 75 261000 1792 1888 2104 2456 1344 1345 1348 1417 0x40 0x6 <7> [128.912557] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 60 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6 <7> [128.912560] [drm:drm_mode_debug_printmodeline] Modeline "2048x1152": 60 162000 2048 2074 2154 2250 1152 1153 1156 1200 0x40 0x5 <7> [128.912563] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa <7> [128.912566] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 75 245250 1920 2056 2264 2608 1200 1203 1209 1255 0x40 0x6 <7> [128.912569] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6 <7> [128.912572] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [128.912574] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [128.912577] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6 <7> [128.912580] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [128.912583] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [128.912586] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 75 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [128.912589] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 70 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [128.912592] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 65 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [128.912594] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [128.912597] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6 <7> [128.912600] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [128.912603] [drm:drm_mode_debug_printmodeline] Modeline "1680x945": 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6 <7> [128.912606] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6 <7> [128.912609] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6 <7> [128.912612] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [128.912615] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [128.912617] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [128.912620] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 <7> [128.912623] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 <7> [128.912626] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [128.912629] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [128.912632] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5 <7> [128.912635] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6 <7> [128.912637] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [128.912640] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [128.912643] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x6 <7> [128.912646] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6 <7> [128.912649] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [128.912652] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [128.912655] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa <7> [128.912657] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [128.912660] [drm:drm_mode_debug_printmodeline] Modeline "1024x576": 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6 <7> [128.912663] [drm:drm_mode_debug_printmodeline] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [128.912666] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [128.912669] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 <7> [128.912672] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [128.912674] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [128.912677] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [128.912680] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [128.912683] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa <7> [128.912686] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.912689] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [128.912692] [drm:drm_mode_debug_printmodeline] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [128.912745] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:318:DP-1] <7> [128.912750] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [128.912874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.913007] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.913175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.913300] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.913462] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:318:DP-1] disconnected <7> [128.913489] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:328:DP-2] <7> [128.913494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [128.913657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.913829] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.913999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.914124] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.914242] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:328:DP-2] disconnected <7> [128.914258] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:337:DP-3] <7> [128.914262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [128.914430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.914574] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.914744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.914913] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.915052] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:337:DP-3] disconnected <7> [128.915070] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:346:DP-4] <7> [128.915073] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [128.915183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.915325] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.915506] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.915632] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.915750] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:346:DP-4] disconnected <7> [128.915944] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:354] <6> [128.940030] ahci 0000:00:17.0: port does not support device sleep <7> [129.939869] [drm:drm_mode_setcrtc] [CRTC:98:pipe A] <7> [129.940087] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [129.940622] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [129.941118] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [129.941634] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [129.942087] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [129.942572] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [129.943108] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [129.943606] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [129.944091] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [129.944555] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [129.944790] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [129.944905] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [129.945019] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [129.945150] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0) <7> [129.945290] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [129.945455] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0) <7> [129.945593] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0) <7> [129.945711] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0) <7> [129.945827] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [129.945947] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [129.946067] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [129.946183] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [129.946321] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [129.946476] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [129.946589] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [129.946703] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0) <7> [129.946817] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [129.946934] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0) <7> [129.947052] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0) <7> [129.947171] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0) <7> [129.947284] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [129.947412] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [129.947551] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [129.947667] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no) <7> [129.947783] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected yes, found no) <7> [129.947902] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected yes, found no) <7> [129.948020] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer <7> [129.948136] expected: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [129.948138] expected: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [129.948140] expected: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [129.948141] expected: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 <7> [129.948142] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [129.948144] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [129.948145] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [129.948146] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [129.948148] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [129.948263] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0) <7> [129.948414] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0) <7> [129.948577] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 285500, found 0) <7> [129.948742] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000039, found 0x00000000) <7> [129.948908] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe <7> [129.949072] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [129.949242] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [129.949245] i915 0000:00:02.0: colorspace: RGB <7> [129.949249] i915 0000:00:02.0: scan mode: Underscan <7> [129.949251] i915 0000:00:02.0: colorimetry: No Data <7> [129.949254] i915 0000:00:02.0: picture aspect: No Data <7> [129.949257] i915 0000:00:02.0: active aspect: Same as Picture <7> [129.949260] i915 0000:00:02.0: itc: No Data <7> [129.949262] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [129.949265] i915 0000:00:02.0: quantization range: Full <7> [129.949268] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [129.949270] i915 0000:00:02.0: video code: 0 <7> [129.949273] i915 0000:00:02.0: ycc quantization range: Full <7> [129.949276] i915 0000:00:02.0: hdmi content type: Graphics <7> [129.949279] i915 0000:00:02.0: pixel repeat: 0 <7> [129.949281] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [129.949285] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [129.949457] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe <7> [129.949599] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [129.949717] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [129.949719] i915 0000:00:02.0: vendor: Intel <7> [129.949721] i915 0000:00:02.0: product: Integrated gfx <7> [129.949722] i915 0000:00:02.0: source device information: PC General (0x9) <7> [129.949724] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [129.949841] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe <7> [129.949960] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [129.950088] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [129.950091] i915 0000:00:02.0: empty frame <7> [129.950094] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [129.950236] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [129.950367] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:98:pipe A] releasing DPLL 0 <7> [129.950532] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [129.950640] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [129.950780] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [129.950893] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0 <7> [129.951010] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [129.951116] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [129.951223] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [129.951342] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [129.951473] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0 <7> [129.951596] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [129.951730] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [129.951848] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [129.951962] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [129.952079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [modeset] <7> [129.952194] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [129.952321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [129.952488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [129.952658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [129.952832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [129.953003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no <7> [129.953170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no <7> [129.953318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no <7> [129.954146] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Disable audio codec on [CRTC:98:pipe A] <7> [129.970915] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [129.971393] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [129.972366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [129.972781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [129.973550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [129.973889] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6 <7> [129.973920] i915 0000:00:02.0: [drm:intel_disable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio <7> [129.974337] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [129.979368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [129.979708] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:98:pipe A] <7> [129.980078] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [129.980540] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A] <7> [129.980878] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [129.981423] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B] <7> [129.981760] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1] <7> [129.982076] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A] <7> [129.982435] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B] <7> [129.982748] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C] <7> [129.983107] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D] <7> [129.983434] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2] <7> [129.983743] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A] <7> [129.984039] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B] <7> [129.984320] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C] <7> [129.984582] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D] <7> [129.984849] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3] <7> [129.985186] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A] <7> [129.985491] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B] <7> [129.985763] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C] <7> [129.986032] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D] <7> [129.986298] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4] <7> [129.986630] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A] <7> [129.986897] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B] <7> [129.987158] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C] <7> [129.987451] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D] <7> [129.987805] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1] <7> [129.988256] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [129.988587] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [129.988874] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [129.989166] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [129.989591] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [129.989891] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [129.990161] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [129.990411] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5 <7> [129.990645] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6 <7> [129.990885] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [129.991325] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [129.991607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [129.991860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [129.992187] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A] <7> [129.992796] [drm:drm_mode_setcrtc] [CRTC:167:pipe B] <7> [129.993121] [drm:drm_mode_setcrtc] [CRTC:236:pipe C] <7> [129.993418] [drm:drm_mode_setcrtc] [CRTC:305:pipe D] <7> [130.016238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [130.016445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [130.016633] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [130.029001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [130.029289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [130.200404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [130.200614] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [130.200797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [130.202080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.202469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [130.208737] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [130.209841] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.210005] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [130.210142] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.210274] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [130.210446] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [130.210680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [130.210839] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.210999] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [130.211115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [130.211265] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [130.295724] [drm:drm_mode_setcrtc] [CRTC:98:pipe A] <7> [130.308256] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [130.308535] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [130.308911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [130.309349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [130.310448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [130.311100] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [130.311994] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [130.312710] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [130.315401] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [130.316060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [130.347331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [130.347446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.347575] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [130.348413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [130.349546] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.349742] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [130.349937] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.350118] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [130.350333] [drm:drm_mode_setcrtc] [CRTC:167:pipe B] <7> [130.350465] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [130.350795] [drm:drm_mode_setcrtc] [CRTC:236:pipe C] <7> [130.368428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [130.368853] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [130.369056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [130.393455] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [130.393464] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [130.393468] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [130.393471] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [130.393475] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [130.393479] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [130.393482] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [130.393486] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [130.395994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [130.396146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [130.396770] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [130.396885] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [130.396901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.397133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.397255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [130.397911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [130.399058] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.399252] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [130.399441] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [130.399784] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.399948] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [130.400146] [drm:drm_mode_setcrtc] [CRTC:305:pipe D] <7> [130.400142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [130.400277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.400455] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.400707] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [130.400843] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [130.400973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [130.402119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.402254] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.402404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.402545] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [130.402556] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [130.402673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.402798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.402925] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.404742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.404918] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.405083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.405483] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [130.405492] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [130.405662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.405838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.406014] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.406779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.406954] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.407121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.407316] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [130.407335] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [130.407496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.407671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.407852] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.408618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.408787] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.408951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.409129] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [130.409139] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [130.413085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [130.414207] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.414406] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [130.414588] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.414765] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [130.414974] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [130.415225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [130.415456] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.415669] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [130.415835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [130.416035] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [130.439823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [130.439919] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [130.440052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [130.440201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [130.440684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [130.440925] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [130.441090] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [130.441342] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [130.442289] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [130.442516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [130.469060] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [130.469221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.469409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [130.470115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [130.471389] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.471551] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [130.471686] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.471818] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [130.472053] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [130.489349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [130.490877] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [130.491966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [130.502605] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [130.502620] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [130.502626] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [130.502632] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [130.502637] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [130.502643] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [130.502648] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [130.502654] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [130.503204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [130.503339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [130.503957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [130.504102] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [130.504119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.504258] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [130.504266] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [130.504401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.504539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.506000] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.508152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.508317] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.508503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.508672] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [130.508679] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [130.508824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.508983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.509144] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.512049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.512223] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.512368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.512499] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [130.512505] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [130.512614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.512735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.512863] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.515851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.515984] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.516103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.516236] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [130.519044] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [130.519052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [130.527849] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [130.529057] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.529209] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [130.529357] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.529498] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [130.529648] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [130.529861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [130.530021] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.530182] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [130.530360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [130.530530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [130.555177] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [130.555277] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [130.555449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [130.555669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [130.556140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [130.556353] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [130.556525] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [130.556991] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [130.557770] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [130.557964] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [130.583360] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [130.583495] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.583669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.583811] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.584539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.584665] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.584779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.584911] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [130.584928] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [130.585035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.612839] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [130.612849] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [130.612852] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [130.612856] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [130.612860] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [130.612863] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [130.612867] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [130.612871] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [130.613654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [130.613817] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [130.614739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [130.614892] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [130.614915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.615084] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [130.615093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [130.615253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.615441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.617797] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.618961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.619139] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.619319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.619495] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [130.619504] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [130.619658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.619823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.619995] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.622912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.623084] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.623248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.623442] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [130.623449] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [130.623612] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.623775] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.623952] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.625863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.626039] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.626206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.626410] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [130.629353] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [130.629360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [130.635865] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [130.636973] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.637155] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [130.637351] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.637507] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [130.637661] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [130.637876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [130.638045] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.638220] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [130.638357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [130.638509] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [130.662792] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [130.662897] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [130.663041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [130.663207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [130.663878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [130.664608] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [130.664829] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [130.665132] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [130.666348] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [130.666632] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [130.692108] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [130.692192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.692338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.692475] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.693345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.693494] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.693610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.693742] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [130.693759] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [130.693868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.723852] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [130.723862] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [130.723866] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [130.723869] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [130.723874] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [130.723877] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [130.723881] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [130.723885] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [130.724670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [130.724800] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [130.725706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [130.725829] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [130.725844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.725973] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [130.725979] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [130.726087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.726209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.728079] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.730194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.730340] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.730457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.730582] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [130.730587] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [130.730694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.730811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.730931] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.733796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.733924] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.734039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.734162] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [130.734167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [130.734271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.734400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.734566] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.736440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.736568] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.736685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.736814] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [130.739615] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [130.739623] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [130.748424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [130.749533] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.749692] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [130.749824] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.749955] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [130.750108] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [130.750341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [130.750518] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.750708] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [130.750827] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [130.750980] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [130.775611] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [130.775720] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [130.775877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [130.776049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [130.776646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [130.776835] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [130.776966] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [130.777560] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [130.778732] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [130.778947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [130.804338] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [130.804425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.804553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.804689] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.807682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.807810] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.807929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.808065] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [130.808082] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [130.808192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.841821] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [130.841831] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [130.841834] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [130.841838] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [130.841842] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [130.841845] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [130.841849] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [130.841852] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [130.842658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [130.842782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [130.843656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [130.843818] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [130.843841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.844024] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [130.844033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [130.844197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.844392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.845803] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.849020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.849150] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.849265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.849409] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [130.849418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [130.849535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.849657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.849781] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.850505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.850645] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.850766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.850891] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [130.850896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [130.851004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.851123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.851245] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.852035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.852178] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.852296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.852444] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [130.852450] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [130.852559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [130.852688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [130.852812] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [130.855675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.855801] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.855915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [130.856044] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [130.858951] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [130.864467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [130.865680] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.865840] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [130.865977] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.866110] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [130.866268] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [130.866488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [130.866652] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [130.866814] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [130.866931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [130.867088] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [130.973151] [drm:drm_mode_setcrtc] [CRTC:98:pipe A] <7> [130.973259] [drm:drm_mode_setcrtc] [CONNECTOR:308:HDMI-A-1] <7> [130.973540] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:308:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [130.974009] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [130.974409] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:98:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [130.974852] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:307:DDI B/PHY B] [CRTC:98:pipe A] <7> [130.975200] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [130.975646] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [130.976030] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [130.976450] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [130.976836] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [130.977208] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [130.977630] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [130.978048] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [130.978418] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [130.978817] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [130.979171] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [130.979555] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [130.979955] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [130.980349] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144) <7> [130.980739] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [130.981077] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144) <7> [130.981461] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083) <7> [130.981858] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088) <7> [130.982190] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [130.982577] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [130.982951] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [130.983299] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [130.983813] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [130.984178] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [130.984633] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [130.985006] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144) <7> [130.985386] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [130.985751] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144) <7> [130.986098] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083) <7> [130.986522] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088) <7> [130.986953] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [130.987345] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [130.987736] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [130.988078] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes) <7> [130.988480] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected no, found yes) <7> [130.988836] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected no, found yes) <7> [130.989180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer <7> [130.989655] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [130.989662] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [130.989669] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [130.989675] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [130.989682] found: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [130.989688] found: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [130.989696] found: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [130.989702] found: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 <7> [130.989711] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [130.990055] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500) <7> [130.990507] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500) <7> [130.990987] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 0, found 285500) <7> [130.991500] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000039) <7> [130.991974] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe <7> [130.992466] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [130.992930] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [130.993405] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [130.993416] i915 0000:00:02.0: colorspace: RGB <7> [130.993424] i915 0000:00:02.0: scan mode: Underscan <7> [130.993433] i915 0000:00:02.0: colorimetry: No Data <7> [130.993441] i915 0000:00:02.0: picture aspect: No Data <7> [130.993450] i915 0000:00:02.0: active aspect: Same as Picture <7> [130.993458] i915 0000:00:02.0: itc: No Data <7> [130.993467] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [130.993475] i915 0000:00:02.0: quantization range: Full <7> [130.993484] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [130.993492] i915 0000:00:02.0: video code: 0 <7> [130.993500] i915 0000:00:02.0: ycc quantization range: Full <7> [130.993509] i915 0000:00:02.0: hdmi content type: Graphics <7> [130.993517] i915 0000:00:02.0: pixel repeat: 0 <7> [130.993526] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [130.993535] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe <7> [130.994025] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [130.994555] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [130.995012] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [130.995022] i915 0000:00:02.0: vendor: Intel <7> [130.995029] i915 0000:00:02.0: product: Integrated gfx <7> [130.995037] i915 0000:00:02.0: source device information: PC General (0x9) <7> [130.995046] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe <7> [130.995549] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [130.996002] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [130.996498] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [130.996508] i915 0000:00:02.0: empty frame <7> [130.996517] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [130.997104] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [130.997573] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [130.998179] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.998684] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55 <7> [130.999006] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.999380] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.999817] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 <7> [131.000249] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 <7> [131.000743] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1142000 num active planes 1 <7> [131.001199] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 1142 <7> [131.001674] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point 0 <7> [131.002177] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (142750 kHz) > [CRTC:98:pipe A] min cdclk (0 kHz) <7> [131.002690] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (22305 kHz) > old min cdclk (0 kHz) <7> [131.003177] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [131.003724] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz <7> [131.004227] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [131.004777] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:98:pipe A] allocated DPLL 0 <7> [131.005229] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:98:pipe A] reserving DPLL 0 <7> [131.005742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: yes [modeset] <7> [131.006238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [131.006780] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [131.007282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [131.007825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [131.008222] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [131.008713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [131.009170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [131.009651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x39 <7> [131.010109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0 <7> [131.010597] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [131.010606] i915 0000:00:02.0: colorspace: RGB <7> [131.010614] i915 0000:00:02.0: scan mode: Underscan <7> [131.010622] i915 0000:00:02.0: colorimetry: No Data <7> [131.010630] i915 0000:00:02.0: picture aspect: No Data <7> [131.010638] i915 0000:00:02.0: active aspect: Same as Picture <7> [131.010645] i915 0000:00:02.0: itc: No Data <7> [131.010653] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [131.010661] i915 0000:00:02.0: quantization range: Full <7> [131.010669] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [131.010677] i915 0000:00:02.0: video code: 0 <7> [131.010684] i915 0000:00:02.0: ycc quantization range: Full <7> [131.010692] i915 0000:00:02.0: hdmi content type: Graphics <7> [131.010700] i915 0000:00:02.0: pixel repeat: 0 <7> [131.010708] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [131.010718] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [131.010727] i915 0000:00:02.0: vendor: Intel <7> [131.010735] i915 0000:00:02.0: product: Integrated gfx <7> [131.010742] i915 0000:00:02.0: source device information: PC General (0x9) <7> [131.010751] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [131.010760] i915 0000:00:02.0: empty frame <7> [131.010768] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [131.010775] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [131.010783] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [131.010790] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00 <7> [131.010798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [131.011248] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [131.011661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [131.012059] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [131.012571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5 <7> [131.013031] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [131.013533] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500 <7> [131.013986] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0 <7> [131.014469] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [131.014921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [131.015384] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [131.015826] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [131.016251] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [131.016730] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [131.017143] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [131.017603] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [131.018059] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [131.018558] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [131.019019] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [131.019502] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [131.019934] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [131.020373] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [131.020803] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [131.021248] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [131.021735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:354] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [131.022171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [131.022689] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [131.023149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [131.023637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [131.023970] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [131.024299] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [131.024758] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no <7> [131.025220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no <7> [131.025707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no <7> [131.038668] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [131.038919] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [131.039295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [131.039753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [131.040790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [131.041248] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [131.041669] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [131.042171] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [131.043509] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.043762] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.067010] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [131.067614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.067801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [131.068458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.069586] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.069736] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [131.069872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.070005] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [131.070145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [131.070269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [131.070415] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [131.070636] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B] <7> [131.070753] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1] <7> [131.070865] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A] <7> [131.070976] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B] <7> [131.071085] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C] <7> [131.071194] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D] <7> [131.071318] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2] <7> [131.071450] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A] <7> [131.071558] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B] <7> [131.071666] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C] <7> [131.071771] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D] <7> [131.071877] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3] <7> [131.071988] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A] <7> [131.072098] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B] <7> [131.072206] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C] <7> [131.072325] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D] <7> [131.072454] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4] <7> [131.072561] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A] <7> [131.072672] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B] <7> [131.072782] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C] <7> [131.072891] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D] <7> [131.073034] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [131.073213] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [131.073396] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [131.073568] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [131.073744] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [131.073886] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [131.074007] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [131.074126] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5 <7> [131.074243] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6 <7> [131.074376] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [131.074551] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:98:pipe A] <7> [131.074670] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [131.074846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [131.075040] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [131.075617] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [131.076129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [131.076265] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.077230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [131.077398] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6 <7> [131.077414] i915 0000:00:02.0: [drm:intel_enable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio <7> [131.077675] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Enable audio codec on [CRTC:98:pipe A], 64 bytes ELD <7> [131.086056] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults <7> [131.086205] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000) <7> [131.086347] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N <6> [131.086493] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected <6> [131.086496] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected <6> [131.086498] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected <6> [131.086500] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected <7> [131.086531] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [131.086680] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A] <7> [131.094383] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [131.094790] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1] <7> [131.095007] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A] <7> [131.095463] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <6> [131.096296] [IGT] i915_pm_rpm: finished subtest basic-rte, SUCCESS <7> [131.096347] [drm:drm_mode_setcrtc] [CRTC:98:pipe A] <7> [131.096462] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [131.096650] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [131.096832] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [131.097004] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [131.097178] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [131.097484] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [131.097661] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [131.097828] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [131.097997] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [131.098166] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [131.098352] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [131.098522] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [131.098694] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [131.098863] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0) <7> [131.099036] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [131.099206] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0) <7> [131.099386] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0) <7> [131.099554] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0) <7> [131.099726] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [131.099900] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [131.100065] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [131.100228] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [131.100406] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [131.100573] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [131.100742] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [131.100912] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0) <7> [131.101078] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [131.101244] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0) <7> [131.101433] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0) <7> [131.101604] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0) <7> [131.101772] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [131.101937] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [131.102106] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [131.102272] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no) <7> [131.102447] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected yes, found no) <7> [131.102608] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected yes, found no) <7> [131.102806] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer <7> [131.102972] expected: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [131.102975] expected: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [131.102978] expected: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [131.102981] expected: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 <7> [131.102983] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.102986] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.102988] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.102991] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.102994] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [131.103161] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0) <7> [131.103329] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0) <7> [131.103490] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 285500, found 0) <7> [131.103661] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000039, found 0x00000000) <7> [131.103830] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe <7> [131.104010] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [131.104176] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [131.104179] i915 0000:00:02.0: colorspace: RGB <7> [131.104182] i915 0000:00:02.0: scan mode: Underscan <7> [131.104185] i915 0000:00:02.0: colorimetry: No Data <7> [131.104188] i915 0000:00:02.0: picture aspect: No Data <7> [131.104191] i915 0000:00:02.0: active aspect: Same as Picture <7> [131.104195] i915 0000:00:02.0: itc: No Data <7> [131.104197] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [131.104201] i915 0000:00:02.0: quantization range: Full <7> [131.104204] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [131.104207] i915 0000:00:02.0: video code: 0 <7> [131.104210] i915 0000:00:02.0: ycc quantization range: Full <7> [131.104213] i915 0000:00:02.0: hdmi content type: Graphics <7> [131.104216] i915 0000:00:02.0: pixel repeat: 0 <7> [131.104219] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [131.104222] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [131.104398] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe <7> [131.104559] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [131.104726] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [131.104730] i915 0000:00:02.0: vendor: Intel <7> [131.104732] i915 0000:00:02.0: product: Integrated gfx <7> [131.104735] i915 0000:00:02.0: source device information: PC General (0x9) <7> [131.104738] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [131.104906] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe <7> [131.105068] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [131.105229] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [131.105232] i915 0000:00:02.0: empty frame <7> [131.105234] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [131.105424] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [131.105601] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:98:pipe A] releasing DPLL 0 <7> [131.105821] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [131.105979] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [131.106187] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.106361] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0 <7> [131.106519] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.106676] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.106830] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.106982] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.107140] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0 <7> [131.107322] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [131.107518] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [131.107688] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [131.107856] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [131.108030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [modeset] <7> [131.108203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [131.108388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [131.108556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [131.108726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [131.108894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [131.109067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no <7> [131.109238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no <7> [131.109430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no <7> [131.111070] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Disable audio codec on [CRTC:98:pipe A] <7> [131.116511] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [131.127720] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [131.127884] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [131.128550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [131.128707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.129215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [131.129368] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6 <7> [131.129387] i915 0000:00:02.0: [drm:intel_disable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio <7> [131.129536] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [131.136374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [131.136579] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:98:pipe A] <7> [131.136770] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [131.136953] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A] <7> [131.137124] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [131.137452] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B] <7> [131.137702] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1] <7> [131.137929] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A] <7> [131.138150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B] <7> [131.138395] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C] <7> [131.138616] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D] <7> [131.138840] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2] <7> [131.139063] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A] <7> [131.139278] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B] <7> [131.139535] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C] <7> [131.139762] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D] <7> [131.139988] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3] <7> [131.140209] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A] <7> [131.140444] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B] <7> [131.140658] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C] <7> [131.140880] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D] <7> [131.141092] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4] <7> [131.141316] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A] <7> [131.141536] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B] <7> [131.141760] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C] <7> [131.141981] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D] <7> [131.142194] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1] <7> [131.142462] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [131.142703] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [131.142925] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [131.143121] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [131.143348] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [131.143538] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [131.143728] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [131.143919] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5 <7> [131.144106] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6 <7> [131.144318] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [131.144550] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [131.144797] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A] <7> [131.145319] [drm:drm_mode_setcrtc] [CRTC:167:pipe B] <7> [131.145328] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [131.172295] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [131.172320] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [131.172326] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [131.172332] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [131.172337] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [131.172342] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [131.172347] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [131.172353] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [131.172866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [131.173046] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.173680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [131.173814] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [131.173831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [131.174096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [131.174226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [131.174385] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.174531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.175664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.175803] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [131.175811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [131.175922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.176049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.176177] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.176909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.177080] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.177250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.177459] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [131.177469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [131.177634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.177805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.177934] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.178663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.178793] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.178908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.179032] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [131.179038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [131.179145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.179260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.179399] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.180109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.180232] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.180370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.180506] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [131.180527] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [131.180635] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [131.183483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.184572] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.184730] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [131.184865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.184997] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [131.185148] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [131.185354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [131.185515] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.185680] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [131.185803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [131.185955] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [131.210672] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [131.210779] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [131.210931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [131.211100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [131.211536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [131.211757] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [131.211895] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [131.212149] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [131.212923] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.213065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.225270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [131.225422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.225614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.225807] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.226630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.226842] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.227014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.227217] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [131.230080] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [131.230133] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [131.232293] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.233403] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.233631] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [131.233854] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.234074] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [131.234275] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [131.234549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [131.234746] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.234938] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [131.235080] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [131.235253] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [131.261423] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [131.261518] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [131.261649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [131.261799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [131.262413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [131.262667] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [131.262844] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [131.263092] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [131.263807] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.263926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.279333] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [131.279473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.352309] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [131.352320] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [131.352324] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [131.352327] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [131.352331] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [131.352334] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [131.352338] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [131.352342] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [131.354844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [131.354992] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.356186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [131.356295] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [131.356326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.356473] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [131.359312] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [131.359324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [131.361523] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.362629] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.362778] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [131.362965] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.363152] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [131.363382] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [131.363605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [131.363768] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.363933] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [131.364056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [131.364204] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [131.388734] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [131.388865] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [131.389073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [131.389298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [131.389900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [131.390292] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [131.390595] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [131.390930] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [131.392063] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.392258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.409974] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [131.410062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.410190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.410347] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.411124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.411254] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.411394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.411568] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [131.411711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.411892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [131.412600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.413731] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.413933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [131.414123] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.414344] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [131.414632] [drm:drm_mode_setcrtc] [CRTC:236:pipe C] <7> [131.414842] [drm:drm_mode_setcrtc] [CRTC:305:pipe D] <7> [131.414845] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [131.415030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.415214] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.415496] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [131.415645] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.415768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.416909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.417078] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.417195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.417350] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [131.420199] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [131.420210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [131.422400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.423522] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.423663] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [131.423799] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.423933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [131.424086] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [131.424515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [131.424682] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.424843] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [131.424960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [131.425107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [131.449767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [131.449939] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [131.450220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [131.450585] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [131.451259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [131.451649] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [131.451917] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [131.452289] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [131.453789] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.454058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.470800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [131.470890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.471014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.471142] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.473025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.473179] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.473329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.473472] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [131.473486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [131.473596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.473717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.473848] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.475628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.475756] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.475872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.476003] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [131.478895] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [131.478915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [131.485510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.486614] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.486774] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [131.486963] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.487151] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [131.487381] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [131.487605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [131.487768] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.487931] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [131.488056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [131.488206] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [131.512841] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [131.512989] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [131.513220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [131.513522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [131.514211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [131.514614] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [131.514862] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [131.515182] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [131.516405] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.516610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.539800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [131.539930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.617776] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [131.617786] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [131.617790] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [131.617793] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [131.617797] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [131.617801] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [131.617804] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [131.617808] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [131.620100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [131.620252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.621361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [131.621470] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [131.621486] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.621629] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [131.621643] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [131.621759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.621885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.622030] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.622745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.622891] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.623017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.623145] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [131.623157] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [131.623270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.623424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.623563] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.625348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.625526] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.625695] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.625886] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [131.628730] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [131.628739] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [131.633198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.634244] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.634445] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [131.634627] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.634809] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [131.634971] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [131.635188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [131.635365] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.635563] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [131.635699] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [131.635845] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [131.659925] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [131.660052] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [131.660251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [131.660537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [131.661345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [131.661658] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [131.661880] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [131.662189] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [131.663384] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.663582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.684564] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [131.684649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.684778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.684906] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.686790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.686967] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.687132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.687333] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [131.687352] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [131.692390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.693499] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.693682] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [131.693856] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.693988] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [131.694139] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [131.694393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [131.694562] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.694724] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [131.694845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [131.694994] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [131.719813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [131.719910] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [131.720041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [131.720196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [131.720711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [131.720988] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [131.721195] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [131.721506] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [131.723027] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.723695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.753706] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [131.753890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.754109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [131.754876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.756047] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.756195] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [131.756342] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.756473] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [131.756679] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [131.756850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.757034] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.757261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [131.757453] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.757592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.758735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.758904] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.759023] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.759163] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [131.762018] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [131.762037] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [131.768633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.769742] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.769939] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [131.770132] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.770340] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [131.770558] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [131.770783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [131.770945] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.771110] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [131.771246] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [131.771439] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [131.795967] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [131.796078] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [131.796247] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [131.796471] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [131.797388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [131.798050] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [131.798493] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [131.799037] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [131.800657] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.800933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.824186] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [131.824324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.904872] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [131.904887] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [131.904893] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [131.904898] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [131.904904] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [131.904908] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [131.904911] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [131.904915] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [131.907571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [131.907742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.910228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [131.910394] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [131.910419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.910576] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [131.910584] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [131.910698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.910824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.910953] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.912043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.912199] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.912341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.912480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [131.915273] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [131.915281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [131.917481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.918601] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.918746] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [131.918881] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.919012] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [131.919161] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [131.919385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [131.919548] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.919707] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [131.919823] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [131.919967] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [131.943832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [131.943928] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [131.944063] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [131.944215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [131.944718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [131.944962] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [131.945138] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [131.945504] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [131.946298] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.946491] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.969697] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [131.969816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.969941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.970069] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.971917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.972098] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.972267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.972480] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [131.972492] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [131.972654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.972823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.972996] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.973760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.973909] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.974077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.974255] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [131.974263] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [131.974443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.974615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [131.974793] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [131.975574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [131.975751] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [131.975916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.976101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [131.978966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.980081] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.980274] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [131.980473] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.980655] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [131.980860] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [131.981072] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [131.981096] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [131.981276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [131.981514] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [131.981738] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [131.981903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [131.982104] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [132.006860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.006955] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [132.007088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [132.007239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [132.007731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [132.007971] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [132.008143] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [132.008428] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [132.009228] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [132.009444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [132.027194] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.027331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.111713] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [132.111723] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [132.111727] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [132.111730] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [132.111734] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [132.111738] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [132.111741] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [132.111745] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [132.113956] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [132.114122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.115210] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [132.115381] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [132.115406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.115602] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [132.115613] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [132.115778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.115954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.116133] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.116903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.117079] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.117240] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.117440] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.120274] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [132.120283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [132.121425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [132.122504] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.122697] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [132.122882] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.123066] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [132.123280] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [132.123576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [132.123795] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.124013] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [132.124182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [132.124394] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [132.149065] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.149178] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [132.149384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [132.149640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [132.150202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [132.150563] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [132.150816] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [132.151167] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [132.152420] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [132.152598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [132.170239] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.170391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.170568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.170748] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.172578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.172760] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.172926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.173115] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [132.173127] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [132.173288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.173486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.173657] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.174403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.174582] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.174748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.174925] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [132.174933] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [132.175093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.175259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.175513] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.177345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.177524] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.177689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.177874] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.180709] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [132.180728] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [132.184030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [132.185138] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.185328] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [132.185514] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.185694] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [132.185906] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [132.186174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [132.186406] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.186627] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [132.186795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [132.186999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [132.210871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.210977] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [132.211129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [132.211300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [132.211939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [132.212351] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [132.212687] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [132.213124] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [132.214565] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [132.214737] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [132.231317] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.231406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.306567] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [132.306580] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [132.306584] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [132.306588] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [132.306591] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [132.306595] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [132.306598] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [132.306602] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [132.308803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [132.308985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.310067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [132.310219] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [132.310244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.310462] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [132.310474] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [132.310642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.310818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.311000] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.311771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.311902] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.312043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.312233] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.315088] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [132.315098] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [132.317295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [132.318420] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.318610] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [132.318798] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.318982] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [132.319195] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [132.319478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [132.319689] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.319900] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [132.320059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [132.320258] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [132.344872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.344998] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [132.345188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [132.345455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [132.346058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [132.346428] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [132.346705] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [132.347100] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [132.348396] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [132.348651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [132.366295] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.366462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.366642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.366817] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.368645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.368816] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.368983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.369170] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [132.369182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [132.369357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.369532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.369705] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.370468] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.370611] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.370776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.370959] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [132.370967] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [132.371127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.371299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.371518] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.372276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.372475] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.372621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.372808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.375647] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [132.375666] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [132.377874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [132.378974] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.379158] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [132.379346] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.379527] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [132.379745] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [132.380014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [132.380231] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.380466] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [132.380633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [132.380834] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [132.405548] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.405648] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [132.405792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [132.405952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [132.406430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [132.406683] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [132.406869] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [132.407229] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [132.408518] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [132.408816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [132.428800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.428933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.512626] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [132.512637] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [132.512640] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [132.512643] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [132.512647] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [132.512651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [132.512654] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [132.512658] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [132.515085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [132.515250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.516336] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [132.516491] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [132.516515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.516709] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [132.516720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [132.516884] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.517065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.517244] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.518021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.518200] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.518393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.518584] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.521419] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [132.521428] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [132.524738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [132.525848] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.526036] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [132.526220] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.526422] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [132.526636] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [132.526909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [132.527124] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.527351] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [132.527516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [132.527714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [132.552491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.552601] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [132.552764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [132.552946] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [132.553481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [132.553764] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [132.553982] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [132.554370] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [132.555413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [132.555651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [132.578866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.579007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.579183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.579382] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.580144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.580339] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.580508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.580704] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.583540] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [132.583552] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [132.584711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [132.585774] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.585965] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [132.586152] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.586346] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [132.586558] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [132.586808] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [132.587027] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.587245] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [132.587425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [132.587627] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [132.612361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.612466] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [132.612619] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [132.612791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [132.613616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [132.614088] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [132.614518] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [132.615059] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [132.616592] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [132.616880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [132.637950] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.638084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.638261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.638458] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.639217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.639410] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.639576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.639765] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [132.639777] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [132.639936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.640101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.640270] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.641059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.641235] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.641419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.641608] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.644447] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [132.644466] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [132.647771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [132.648879] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.649063] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [132.649241] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.649440] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [132.649654] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [132.649931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [132.650148] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.650376] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [132.650538] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [132.650735] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [132.675423] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.675520] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [132.675651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [132.675808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [132.676390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [132.676858] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [132.677254] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [132.677816] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [132.679466] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [132.679757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [132.699716] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.699845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.783469] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [132.783479] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [132.783482] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [132.783486] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [132.783489] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [132.783493] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [132.783496] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [132.783500] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [132.785801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [132.785961] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.787049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [132.787197] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [132.787221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.787425] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [132.787436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [132.787593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.787768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.787944] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.788719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.788895] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.789057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.789239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.792100] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [132.792109] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [132.795418] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [132.796526] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.796709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [132.796886] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.797060] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [132.797272] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [132.797562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [132.797775] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.797990] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [132.798156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [132.798365] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [132.822937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.823035] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [132.823166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [132.823344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [132.824019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [132.824258] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [132.824454] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [132.824734] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [132.825562] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [132.825742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [132.843408] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.843535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.843720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.843898] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.845723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.845854] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.846017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.846208] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [132.846220] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [132.846400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.846577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.846760] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.847528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.847704] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.847868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.848043] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [132.848051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [132.848210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.848412] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.848590] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.849356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.849530] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.849691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.849877] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.852714] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [132.852733] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [132.856034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [132.857142] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.857336] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [132.857519] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.857704] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [132.857916] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [132.858193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [132.858424] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [132.858643] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [132.858810] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [132.859013] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [132.883732] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.883826] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [132.883959] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [132.884109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [132.884699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [132.884941] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [132.885113] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [132.885811] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [132.887106] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [132.887422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [132.910697] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.910794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.991055] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [132.991066] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [132.991069] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [132.991073] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [132.991077] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [132.991080] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [132.991084] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [132.991088] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [132.991696] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [132.991917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.993128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [132.993278] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [132.993302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.993514] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [132.993525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [132.993696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.993873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [132.994046] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [132.994821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [132.995000] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [132.995159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.995357] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.998195] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [132.998203] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [132.999319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.000424] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.000618] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [133.000805] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.000985] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [133.001198] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [133.001484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [133.001698] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.001914] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [133.002079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [133.002277] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.027032] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.027128] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [133.027260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [133.027447] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [133.027971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [133.028201] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [133.028394] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [133.028825] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [133.029831] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.030028] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.053178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.053314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.053498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.053679] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.055510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.055687] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.055853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.056047] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [133.056059] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [133.056224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.056416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.056593] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.057359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.057533] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.057701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.057882] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [133.057890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [133.058056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.058228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.058435] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.059190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.059383] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.059551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.059740] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.062574] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [133.062592] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [133.065896] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.067006] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.067196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [133.067397] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.067576] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [133.067790] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [133.068074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [133.068291] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.068529] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [133.068693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [133.068892] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.093611] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.093705] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [133.093839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [133.093990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [133.094545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [133.094956] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [133.095280] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [133.095768] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [133.097297] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.097593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.120833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.120920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.202771] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [133.202783] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [133.202787] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [133.202791] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [133.202796] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [133.202800] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [133.202804] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [133.202808] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [133.204959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [133.205099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [133.205641] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [133.205752] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [133.205768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.205901] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [133.205909] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [133.206018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.206140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.206269] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.206991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.207118] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.207232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.207390] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.210225] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [133.210234] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [133.212426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.213556] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.213707] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [133.213840] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.213969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [133.214118] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [133.214344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [133.214512] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.214671] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [133.214791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [133.214941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.239615] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.239732] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [133.239904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [133.240096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [133.240726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [133.240957] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [133.241119] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [133.241648] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [133.242685] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.242887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.258371] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.258451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.258577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.258704] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.260599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.260731] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.260848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.260985] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.263867] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [133.263879] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [133.270479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.271602] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.271747] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [133.271882] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.272014] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [133.272166] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [133.272384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [133.272545] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.272747] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [133.272923] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [133.273127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.297847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.297995] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [133.298225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [133.298582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [133.299497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [133.299844] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [133.300117] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [133.300560] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [133.301926] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.302125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.319852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.319943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.320071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.320197] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.320986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.321128] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.321245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.321406] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [133.321415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [133.321527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.321646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.321772] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.323559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.323689] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.323807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.323938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.326823] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [133.326843] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [133.333439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.334561] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.334712] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [133.334843] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.334971] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [133.335121] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [133.335346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [133.335529] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.335693] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [133.335820] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [133.335994] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.360672] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.360787] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [133.360955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [133.361141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [133.361822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [133.362202] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [133.362540] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [133.362998] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [133.364502] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.364730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.387935] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.388069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.467064] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [133.467074] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [133.467078] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [133.467081] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [133.467085] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [133.467088] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [133.467092] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [133.467096] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [133.469702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [133.469880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [133.472547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [133.472703] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [133.472720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.472859] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [133.472871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [133.472981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.473105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.473236] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.473964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.474092] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.474208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.474366] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.477202] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [133.477211] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [133.478386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.479431] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.479568] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [133.479700] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.479835] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [133.479985] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [133.480194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [133.480379] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.480558] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [133.480679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [133.480825] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.505450] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.505545] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [133.505679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [133.505830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [133.506257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [133.506471] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [133.506620] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [133.506864] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [133.507585] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.507708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.527512] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.527599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.527726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.527855] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.529740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.529865] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.529988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.530125] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.533008] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [133.533020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [133.539621] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.540748] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.540930] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [133.541065] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.541199] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [133.541379] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [133.541604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [133.541765] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.541924] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [133.542040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [133.542184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.566819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.566938] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [133.567116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [133.567446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [133.568217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [133.568691] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [133.568985] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [133.569388] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [133.570708] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.570894] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.591859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.592009] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.592185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.592361] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.594164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.594301] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.594435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.594574] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [133.594584] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [133.594695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.594815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.594950] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.595659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.595782] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.595946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.596126] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [133.596147] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [133.596323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.678082] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [133.678092] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [133.678096] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [133.678099] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [133.678103] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [133.678107] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [133.678110] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [133.678114] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [133.680718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [133.680890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [133.683537] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [133.683698] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [133.683722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.683881] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [133.683888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [133.684000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.684124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.684256] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.685188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.685323] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.685437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.685560] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [133.685566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [133.685675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.685800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.685927] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.686651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.686776] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.686915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.687043] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [133.687048] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [133.687158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.687278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.687425] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.689201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.689389] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.689556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.689738] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [133.689746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [133.689904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.690072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.690202] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.691989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.692120] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.692250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.692388] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [133.692397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.700772] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.701879] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.702067] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [133.702238] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.702389] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [133.702548] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [133.702765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [133.702935] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.703100] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [133.703218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [133.703385] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.766537] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:308:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [133.767018] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [133.767422] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:98:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [133.767868] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:307:DDI B/PHY B] [CRTC:98:pipe A] <7> [133.768196] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [133.768601] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [133.769039] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [133.769430] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [133.769835] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [133.770214] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [133.770693] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [133.771052] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [133.771456] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [133.771858] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [133.772226] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [133.772608] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [133.772975] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [133.773343] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144) <7> [133.773751] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [133.774127] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144) <7> [133.774534] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083) <7> [133.774901] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088) <7> [133.775244] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [133.775797] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [133.776231] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [133.776817] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [133.777172] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [133.777566] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [133.777927] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [133.778269] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144) <7> [133.778693] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <6> [133.778959] ahci 0000:00:17.0: port does not support device sleep <7> [133.779059] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144) <7> [133.779383] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083) <7> [133.779714] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088) <7> [133.779970] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [133.780234] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [133.780521] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [133.780797] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes) <7> [133.781052] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected no, found yes) <7> [133.781301] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected no, found yes) <7> [133.781589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer <7> [133.781853] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.781856] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.781859] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.781862] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.781865] found: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [133.781868] found: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [133.781871] found: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [133.781873] found: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 <7> [133.781877] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [133.782076] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500) <7> [133.782268] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500) <7> [133.782504] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 0, found 285500) <7> [133.782763] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000039) <7> [133.782953] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe <7> [133.783140] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [133.783353] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [133.783566] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [133.783571] i915 0000:00:02.0: colorspace: RGB <7> [133.783574] i915 0000:00:02.0: scan mode: Underscan <7> [133.783577] i915 0000:00:02.0: colorimetry: No Data <7> [133.783581] i915 0000:00:02.0: picture aspect: No Data <7> [133.783584] i915 0000:00:02.0: active aspect: Same as Picture <7> [133.783587] i915 0000:00:02.0: itc: No Data <7> [133.783590] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [133.783593] i915 0000:00:02.0: quantization range: Full <7> [133.783596] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [133.783599] i915 0000:00:02.0: video code: 0 <7> [133.783603] i915 0000:00:02.0: ycc quantization range: Full <7> [133.783606] i915 0000:00:02.0: hdmi content type: Graphics <7> [133.783609] i915 0000:00:02.0: pixel repeat: 0 <7> [133.783612] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [133.783616] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe <7> [133.783811] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [133.784026] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [133.784328] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [133.784335] i915 0000:00:02.0: vendor: Intel <7> [133.784341] i915 0000:00:02.0: product: Integrated gfx <7> [133.784346] i915 0000:00:02.0: source device information: PC General (0x9) <7> [133.784352] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe <7> [133.784637] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [133.784894] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [133.785084] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [133.785089] i915 0000:00:02.0: empty frame <7> [133.785094] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [133.785360] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [133.785518] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [133.785662] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [133.785789] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55 <7> [133.785918] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [133.786039] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [133.786159] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 <7> [133.786278] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 <7> [133.786424] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1142000 num active planes 1 <7> [133.786578] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 1142 <7> [133.786771] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point 0 <7> [133.786989] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (142750 kHz) > [CRTC:98:pipe A] min cdclk (0 kHz) <7> [133.787190] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (22305 kHz) > old min cdclk (0 kHz) <7> [133.787413] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [133.787560] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz <7> [133.787694] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [133.787827] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:98:pipe A] allocated DPLL 0 <7> [133.787948] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:98:pipe A] reserving DPLL 0 <7> [133.788068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: yes [modeset] <7> [133.788188] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [133.788323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [133.788445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [133.788566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [133.788732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [133.788896] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [133.789059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [133.789231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x39 <7> [133.789409] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0 <7> [133.789552] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [133.789554] i915 0000:00:02.0: colorspace: RGB <7> [133.789556] i915 0000:00:02.0: scan mode: Underscan <7> [133.789558] i915 0000:00:02.0: colorimetry: No Data <7> [133.789560] i915 0000:00:02.0: picture aspect: No Data <7> [133.789562] i915 0000:00:02.0: active aspect: Same as Picture <7> [133.789563] i915 0000:00:02.0: itc: No Data <7> [133.789565] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [133.789567] i915 0000:00:02.0: quantization range: Full <7> [133.789569] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [133.789571] i915 0000:00:02.0: video code: 0 <7> [133.789573] i915 0000:00:02.0: ycc quantization range: Full <7> [133.789575] i915 0000:00:02.0: hdmi content type: Graphics <7> [133.789577] i915 0000:00:02.0: pixel repeat: 0 <7> [133.789579] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [133.789581] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [133.789583] i915 0000:00:02.0: vendor: Intel <7> [133.789585] i915 0000:00:02.0: product: Integrated gfx <7> [133.789587] i915 0000:00:02.0: source device information: PC General (0x9) <7> [133.789589] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [133.789591] i915 0000:00:02.0: empty frame <7> [133.789593] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [133.789595] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [133.789597] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [133.789598] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00 <7> [133.789600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [133.789716] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [133.789831] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [133.789948] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [133.790067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5 <7> [133.790186] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [133.790320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500 <7> [133.790461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0 <7> [133.790599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [133.790720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [133.790840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [133.790958] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [133.791073] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [133.791189] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [133.791315] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [133.791473] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [133.791647] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [133.791815] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [133.791978] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [133.792143] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [133.792324] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [133.792474] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [133.792639] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [133.792765] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [133.792903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:355] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [133.793025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [133.793142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [133.793259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [133.793393] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [133.793534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [133.793650] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [133.793774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no <7> [133.793893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no <7> [133.794013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no <7> [133.805553] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.805642] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [133.805773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [133.805924] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [133.806273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [133.806699] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [133.806825] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [133.807057] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [133.807817] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.807939] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.817866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.818108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.818235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [133.818954] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.820108] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.820250] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [133.820402] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [133.820551] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [133.820704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [133.820834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [133.820985] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [133.821195] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B] <7> [133.821323] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1] <7> [133.821462] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A] <7> [133.821576] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B] <7> [133.821721] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C] <7> [133.821850] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D] <7> [133.821979] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2] <7> [133.822088] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A] <7> [133.822196] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B] <7> [133.822314] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C] <7> [133.822436] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D] <7> [133.822541] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3] <7> [133.822653] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A] <7> [133.822765] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B] <7> [133.822884] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C] <7> [133.822993] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D] <7> [133.823100] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4] <7> [133.823213] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A] <7> [133.823340] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B] <7> [133.823464] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C] <7> [133.823574] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D] <7> [133.823714] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [133.823859] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [133.823981] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [133.824104] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [133.824226] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [133.824371] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [133.824499] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [133.824626] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5 <7> [133.824742] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6 <7> [133.824860] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [133.825016] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:98:pipe A] <7> [133.825135] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [133.825327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [133.825584] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [133.826179] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [133.826666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [133.826779] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [133.827205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [133.827349] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6 <7> [133.827367] i915 0000:00:02.0: [drm:intel_enable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio <7> [133.827620] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Enable audio codec on [CRTC:98:pipe A], 64 bytes ELD <7> [133.836094] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults <7> [133.836243] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000) <7> [133.836434] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N <6> [133.836580] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected <6> [133.836583] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected <6> [133.836586] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected <6> [133.836588] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected <7> [133.836619] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [133.836765] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A] <7> [133.844327] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [133.844763] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1] <7> [133.844980] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A] <7> [133.845495] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [133.848318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <6> [133.848482] [IGT] i915_pm_rpm: exiting, ret=0 <7> [133.873693] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [133.881747] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [133.881767] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [133.881770] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [133.881773] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [133.881776] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [133.881779] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [133.881781] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [133.881785] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [133.882119] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [133.882269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [133.882804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [133.882913] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [133.882936] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10 <7> [133.883107] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [133.883272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.883494] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.883665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.883794] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.883912] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [133.886599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <6> [133.886674] Console: switching to colour frame buffer device 240x67 <7> [133.886736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.886874] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.887025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.887151] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.887270] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [133.887486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [133.887679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.887869] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.888071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.888201] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.888343] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [133.894504] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [133.894688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [133.894866] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [133.895069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [133.895248] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [133.895420] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [128.830027] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:308:HDMI-A-1]

<7> [128.830043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [128.856604] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [128.856619] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [128.856624] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [128.856629] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [128.856634] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [128.856639] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [128.856643] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [128.856648] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [128.856954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [128.857079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [128.857534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [128.857672] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [128.858248] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:308:HDMI-A-1] probed modes :

<7> [128.858254] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [128.858258] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.858262] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.858265] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.858267] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.858270] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.858273] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.858276] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.858279] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.858282] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [128.858285] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [128.858287] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [128.858290] [drm:drm_mode_debug_printmodeline] Modeline "3440x1440": 90 476140 3440 3448 3480 3520 1440 1441 1449 1503 0x40 0xa

<7> [128.858293] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 75 443250 2560 2768 3048 3536 1600 1603 1609 1672 0x40 0x6

<7> [128.858296] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 60 348500 2560 2752 3032 3504 1600 1603 1609 1658 0x40 0x6

<7> [128.858299] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 120 497770 2560 2608 2640 2720 1440 1443 1448 1525 0x40 0xa

<7> [128.858302] [drm:drm_mode_debug_printmodeline] Modeline "2048x1536": 60 267027 2048 2200 2424 2800 1536 1537 1540 1589 0x0 0x6

<7> [128.858316] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 495000 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5

<7> [128.858321] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 494505 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5

<7> [128.858325] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 75 297000 1920 2064 2288 2640 1440 1441 1444 1500 0x40 0x6

<7> [128.858330] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6

<7> [128.858335] [drm:drm_mode_debug_printmodeline] Modeline "2160x1200": 90 261420 2160 2208 2240 2320 1200 1203 1208 1252 0x40 0xa

<7> [128.858340] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 75 288000 1856 1984 2208 2560 1392 1393 1396 1500 0x40 0x6

<7> [128.858344] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 60 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6

<7> [128.858349] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 75 261000 1792 1888 2104 2456 1344 1345 1348 1417 0x40 0x6

<7> [128.858353] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 60 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6

<7> [128.858358] [drm:drm_mode_debug_printmodeline] Modeline "2048x1152": 60 162000 2048 2074 2154 2250 1152 1153 1156 1200 0x40 0x5

<7> [128.858364] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa

<7> [128.858370] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 75 245250 1920 2056 2264 2608 1200 1203 1209 1255 0x40 0x6

<7> [128.858374] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6

<7> [128.858379] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [128.858384] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [128.858389] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6

<7> [128.858394] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [128.858398] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [128.858402] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 75 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [128.858407] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 70 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [128.858411] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 65 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [128.858416] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [128.858420] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6

<7> [128.858425] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [128.858429] [drm:drm_mode_debug_printmodeline] Modeline "1680x945": 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6

<7> [128.858434] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6

<7> [128.858439] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6

<7> [128.858443] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [128.858448] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [128.858453] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [128.858457] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6

<7> [128.858462] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6

<7> [128.858467] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [128.858471] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [128.858476] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5

<7> [128.858480] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6

<7> [128.858485] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [128.858490] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [128.858494] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x6

<7> [128.858499] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6

<7> [128.858503] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [128.858508] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [128.858513] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa

<7> [128.858517] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.858522] [drm:drm_mode_debug_printmodeline] Modeline "1024x576": 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6

<7> [128.858526] [drm:drm_mode_debug_printmodeline] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [128.858531] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [128.858535] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5

<7> [128.858540] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.858545] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.858549] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.858554] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [128.858559] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa

<7> [128.858563] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.858568] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.858572] [drm:drm_mode_debug_printmodeline] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [128.858720] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:318:DP-1]

<7> [128.858725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [128.858854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.858986] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.859145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.859284] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.859425] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:318:DP-1] disconnected

<7> [128.859537] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:328:DP-2]

<7> [128.859541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [128.859654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.859782] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.859939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.860063] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.860181] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:328:DP-2] disconnected

<7> [128.860254] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:337:DP-3]

<7> [128.860257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [128.860453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.860617] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.860796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.860923] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.861041] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:337:DP-3] disconnected

<7> [128.861118] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:346:DP-4]

<7> [128.861121] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [128.861232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.861381] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.861552] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.861678] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.861797] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:346:DP-4] disconnected

<7> [128.876501] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:318:DP-1]

<7> [128.876511] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [128.876709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.876905] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.877143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.877340] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.877515] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:318:DP-1] disconnected

<7> [128.878390] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:328:DP-2]

<7> [128.878396] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [128.878568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.878751] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.878976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.879153] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.879356] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:328:DP-2] disconnected

<7> [128.880135] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:337:DP-3]

<7> [128.880141] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [128.880319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.880505] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.880727] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.880902] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.881074] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:337:DP-3] disconnected

<7> [128.881898] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:346:DP-4]

<7> [128.881904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [128.882089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.882273] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.882491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.882668] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.882836] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:346:DP-4] disconnected

<7> [128.883934] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:308:HDMI-A-1]

<7> [128.883946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [128.910686] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [128.910696] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [128.910699] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [128.910702] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [128.910706] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [128.910709] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [128.910712] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [128.910716] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [128.911083] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [128.911206] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [128.911676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [128.911827] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [128.912478] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:308:HDMI-A-1] probed modes :

<7> [128.912484] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [128.912488] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.912492] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.912495] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.912497] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.912500] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.912503] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.912506] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.912509] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [128.912512] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [128.912515] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [128.912517] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [128.912520] [drm:drm_mode_debug_printmodeline] Modeline "3440x1440": 90 476140 3440 3448 3480 3520 1440 1441 1449 1503 0x40 0xa

<7> [128.912523] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 75 443250 2560 2768 3048 3536 1600 1603 1609 1672 0x40 0x6

<7> [128.912526] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 60 348500 2560 2752 3032 3504 1600 1603 1609 1658 0x40 0x6

<7> [128.912529] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 120 497770 2560 2608 2640 2720 1440 1443 1448 1525 0x40 0xa

<7> [128.912532] [drm:drm_mode_debug_printmodeline] Modeline "2048x1536": 60 267027 2048 2200 2424 2800 1536 1537 1540 1589 0x0 0x6

<7> [128.912535] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 495000 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5

<7> [128.912537] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 494505 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5

<7> [128.912540] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 75 297000 1920 2064 2288 2640 1440 1441 1444 1500 0x40 0x6

<7> [128.912543] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6

<7> [128.912546] [drm:drm_mode_debug_printmodeline] Modeline "2160x1200": 90 261420 2160 2208 2240 2320 1200 1203 1208 1252 0x40 0xa

<7> [128.912549] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 75 288000 1856 1984 2208 2560 1392 1393 1396 1500 0x40 0x6

<7> [128.912552] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 60 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6

<7> [128.912555] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 75 261000 1792 1888 2104 2456 1344 1345 1348 1417 0x40 0x6

<7> [128.912557] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 60 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6

<7> [128.912560] [drm:drm_mode_debug_printmodeline] Modeline "2048x1152": 60 162000 2048 2074 2154 2250 1152 1153 1156 1200 0x40 0x5

<7> [128.912563] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa

<7> [128.912566] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 75 245250 1920 2056 2264 2608 1200 1203 1209 1255 0x40 0x6

<7> [128.912569] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6

<7> [128.912572] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [128.912574] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [128.912577] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6

<7> [128.912580] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [128.912583] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [128.912586] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 75 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [128.912589] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 70 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [128.912592] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 65 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [128.912594] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [128.912597] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6

<7> [128.912600] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [128.912603] [drm:drm_mode_debug_printmodeline] Modeline "1680x945": 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6

<7> [128.912606] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6

<7> [128.912609] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6

<7> [128.912612] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [128.912615] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [128.912617] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [128.912620] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6

<7> [128.912623] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6

<7> [128.912626] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [128.912629] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [128.912632] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5

<7> [128.912635] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6

<7> [128.912637] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [128.912640] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [128.912643] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x6

<7> [128.912646] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6

<7> [128.912649] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [128.912652] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [128.912655] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa

<7> [128.912657] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [128.912660] [drm:drm_mode_debug_printmodeline] Modeline "1024x576": 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6

<7> [128.912663] [drm:drm_mode_debug_printmodeline] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [128.912666] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [128.912669] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5

<7> [128.912672] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [128.912674] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [128.912677] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [128.912680] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [128.912683] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa

<7> [128.912686] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.912689] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [128.912692] [drm:drm_mode_debug_printmodeline] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [128.912745] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:318:DP-1]

<7> [128.912750] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [128.912874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.913007] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.913175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.913300] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.913462] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:318:DP-1] disconnected

<7> [128.913489] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:328:DP-2]

<7> [128.913494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [128.913657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.913829] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.913999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.914124] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.914242] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:328:DP-2] disconnected

<7> [128.914258] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:337:DP-3]

<7> [128.914262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [128.914430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.914574] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.914744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.914913] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.915052] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:337:DP-3] disconnected

<7> [128.915070] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:346:DP-4]

<7> [128.915073] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [128.915183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.915325] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.915506] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.915632] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.915750] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:346:DP-4] disconnected

<6> [128.940030] ahci 0000:00:17.0: port does not support device sleep

<7> [129.940087] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [129.940622] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [129.941118] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [129.941634] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [129.942087] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [129.942572] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [129.943108] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [129.943606] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [129.944091] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [129.944555] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [129.944790] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [129.944905] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [129.945019] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [129.945150] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0)

<7> [129.945290] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [129.945455] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0)

<7> [129.945593] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0)

<7> [129.945711] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0)

<7> [129.945827] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [129.945947] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [129.946067] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [129.946183] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [129.946321] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [129.946476] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [129.946589] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [129.946703] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0)

<7> [129.946817] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [129.946934] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0)

<7> [129.947052] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0)

<7> [129.947171] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0)

<7> [129.947284] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [129.947412] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [129.947551] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [129.947667] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no)

<7> [129.947783] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected yes, found no)

<7> [129.947902] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected yes, found no)

<7> [129.948020] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer

<7> [129.948136] expected: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [129.948138] expected: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [129.948140] expected: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [129.948141] expected: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03

<7> [129.948142] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [129.948144] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [129.948145] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [129.948146] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [129.948148] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [129.948263] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0)

<7> [129.948414] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0)

<7> [129.948577] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 285500, found 0)

<7> [129.948742] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000039, found 0x00000000)

<7> [129.948908] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe

<7> [129.949072] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [129.949242] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [129.949268] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [129.949281] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [129.949285] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [129.949457] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe

<7> [129.949599] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [129.949717] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [129.949722] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [129.949724] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [129.949841] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe

<7> [129.949960] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [129.950088] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [129.950094] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [129.950236] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [129.950367] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:98:pipe A] releasing DPLL 0

<7> [129.950532] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [129.950640] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [129.950780] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [129.950893] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0

<7> [129.951010] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [129.951116] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [129.951223] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [129.951342] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [129.951473] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0

<7> [129.951596] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [129.951730] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [129.951848] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [129.951962] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [129.952079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [modeset]

<7> [129.952194] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [129.952321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [129.952488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [129.952658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [129.952832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [129.953003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no

<7> [129.953170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no

<7> [129.953318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no

<7> [129.954146] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Disable audio codec on [CRTC:98:pipe A]

<7> [129.970915] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [129.971393] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [129.972366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [129.972781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [129.973550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [129.973889] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6

<7> [129.973920] i915 0000:00:02.0: [drm:intel_disable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio

<7> [129.974337] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [129.979368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [129.979708] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:98:pipe A]

<7> [129.980078] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [129.980540] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]

<7> [129.980878] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [129.981423] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B]

<7> [129.981760] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1]

<7> [129.982076] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A]

<7> [129.982435] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B]

<7> [129.982748] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C]

<7> [129.983107] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D]

<7> [129.983434] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2]

<7> [129.983743] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A]

<7> [129.984039] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B]

<7> [129.984320] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C]

<7> [129.984582] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D]

<7> [129.984849] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3]

<7> [129.985186] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A]

<7> [129.985491] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B]

<7> [129.985763] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C]

<7> [129.986032] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D]

<7> [129.986298] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4]

<7> [129.986630] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A]

<7> [129.986897] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B]

<7> [129.987158] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C]

<7> [129.987451] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D]

<7> [129.987805] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [129.988256] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [129.988587] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [129.988874] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [129.989166] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [129.989591] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [129.989891] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [129.990161] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [129.990411] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5

<7> [129.990645] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6

<7> [129.990885] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [129.991325] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [129.991607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [129.991860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [129.992187] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A]

<7> [130.016238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [130.016445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [130.016633] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [130.029001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [130.029289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [130.200404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [130.200614] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [130.200797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [130.202080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.202469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [130.208737] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [130.209841] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.210005] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [130.210142] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.210274] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [130.210446] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [130.210680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [130.210839] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.210999] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [130.211115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [130.211265] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [130.308256] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [130.308535] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [130.308911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [130.309349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [130.310448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [130.311100] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [130.311994] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [130.312710] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [130.315401] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [130.316060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [130.347331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [130.347446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.347575] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [130.348413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [130.349546] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.349742] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [130.349937] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.350118] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [130.350465] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [130.368428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [130.368853] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [130.369056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [130.393455] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [130.393464] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [130.393468] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [130.393471] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [130.393475] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [130.393479] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [130.393482] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [130.393486] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [130.395994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [130.396146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [130.396770] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [130.396885] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [130.396901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.397133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.397255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [130.397911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [130.399058] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.399252] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [130.399441] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [130.399784] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.399948] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [130.400142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [130.400277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.400455] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.400707] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [130.400843] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [130.400973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [130.402119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.402254] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.402404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.402545] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [130.402556] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [130.402673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.402798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.402925] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.404742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.404918] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.405083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.405483] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [130.405492] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [130.405662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.405838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.406014] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.406779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.406954] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.407121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.407316] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [130.407335] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [130.407496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.407671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.407852] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.408618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.408787] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.408951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.409129] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [130.409139] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [130.413085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [130.414207] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.414406] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [130.414588] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.414765] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [130.414974] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [130.415225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [130.415456] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.415669] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [130.415835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [130.416035] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [130.439823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [130.439919] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [130.440052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [130.440201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [130.440684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [130.440925] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [130.441090] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [130.441342] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [130.442289] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [130.442516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [130.469060] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [130.469221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.469409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [130.470115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [130.471389] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.471551] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [130.471686] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.471818] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [130.472053] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [130.489349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [130.490877] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [130.491966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [130.502605] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [130.502620] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [130.502626] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [130.502632] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [130.502637] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [130.502643] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [130.502648] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [130.502654] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [130.503204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [130.503339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [130.503957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [130.504102] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [130.504119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.504258] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [130.504266] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [130.504401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.504539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.506000] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.508152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.508317] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.508503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.508672] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [130.508679] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [130.508824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.508983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.509144] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.512049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.512223] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.512368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.512499] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [130.512505] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [130.512614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.512735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.512863] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.515851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.515984] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.516103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.516236] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [130.519044] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [130.519052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [130.527849] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [130.529057] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.529209] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [130.529357] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.529498] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [130.529648] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [130.529861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [130.530021] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.530182] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [130.530360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [130.530530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [130.555177] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [130.555277] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [130.555449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [130.555669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [130.556140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [130.556353] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [130.556525] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [130.556991] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [130.557770] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [130.557964] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [130.583360] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [130.583495] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.583669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.583811] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.584539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.584665] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.584779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.584911] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [130.584928] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [130.585035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.612839] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [130.612849] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [130.612852] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [130.612856] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [130.612860] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [130.612863] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [130.612867] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [130.612871] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [130.613654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [130.613817] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [130.614739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [130.614892] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [130.614915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.615084] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [130.615093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [130.615253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.615441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.617797] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.618961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.619139] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.619319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.619495] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [130.619504] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [130.619658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.619823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.619995] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.622912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.623084] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.623248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.623442] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [130.623449] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [130.623612] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.623775] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.623952] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.625863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.626039] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.626206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.626410] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [130.629353] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [130.629360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [130.635865] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [130.636973] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.637155] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [130.637351] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.637507] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [130.637661] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [130.637876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [130.638045] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.638220] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [130.638357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [130.638509] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [130.662792] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [130.662897] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [130.663041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [130.663207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [130.663878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [130.664608] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [130.664829] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [130.665132] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [130.666348] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [130.666632] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [130.692108] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [130.692192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.692338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.692475] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.693345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.693494] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.693610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.693742] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [130.693759] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [130.693868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.723852] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [130.723862] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [130.723866] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [130.723869] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [130.723874] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [130.723877] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [130.723881] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [130.723885] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [130.724670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [130.724800] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [130.725706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [130.725829] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [130.725844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.725973] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [130.725979] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [130.726087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.726209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.728079] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.730194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.730340] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.730457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.730582] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [130.730587] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [130.730694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.730811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.730931] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.733796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.733924] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.734039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.734162] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [130.734167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [130.734271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.734400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.734566] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.736440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.736568] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.736685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.736814] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [130.739615] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [130.739623] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [130.748424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [130.749533] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.749692] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [130.749824] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.749955] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [130.750108] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [130.750341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [130.750518] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.750708] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [130.750827] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [130.750980] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [130.775611] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [130.775720] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [130.775877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [130.776049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [130.776646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [130.776835] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [130.776966] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [130.777560] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [130.778732] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [130.778947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [130.804338] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [130.804425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.804553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.804689] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.807682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.807810] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.807929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.808065] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [130.808082] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [130.808192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.841821] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [130.841831] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [130.841834] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [130.841838] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [130.841842] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [130.841845] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [130.841849] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [130.841852] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [130.842658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [130.842782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [130.843656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [130.843818] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [130.843841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.844024] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [130.844033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [130.844197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.844392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.845803] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.849020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.849150] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.849265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.849409] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [130.849418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [130.849535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.849657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.849781] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.850505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.850645] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.850766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.850891] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [130.850896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [130.851004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.851123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.851245] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.852035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.852178] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.852296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.852444] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [130.852450] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [130.852559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [130.852688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [130.852812] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [130.855675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.855801] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.855915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [130.856044] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [130.858951] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [130.864467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [130.865680] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.865840] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [130.865977] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.866110] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [130.866268] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [130.866488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [130.866652] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [130.866814] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [130.866931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [130.867088] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [130.973540] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:308:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [130.974009] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [130.974409] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:98:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [130.974852] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:307:DDI B/PHY B] [CRTC:98:pipe A]

<7> [130.975200] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [130.975646] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [130.976030] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [130.976450] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [130.976836] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [130.977208] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [130.977630] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [130.978048] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [130.978418] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [130.978817] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [130.979171] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [130.979555] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [130.979955] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [130.980349] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144)

<7> [130.980739] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [130.981077] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144)

<7> [130.981461] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083)

<7> [130.981858] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088)

<7> [130.982190] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [130.982577] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [130.982951] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [130.983299] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [130.983813] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [130.984178] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [130.984633] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [130.985006] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144)

<7> [130.985386] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [130.985751] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144)

<7> [130.986098] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083)

<7> [130.986522] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088)

<7> [130.986953] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [130.987345] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [130.987736] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [130.988078] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes)

<7> [130.988480] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected no, found yes)

<7> [130.988836] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected no, found yes)

<7> [130.989180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer

<7> [130.989655] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [130.989662] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [130.989669] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [130.989675] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [130.989682] found: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [130.989688] found: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [130.989696] found: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [130.989702] found: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03

<7> [130.989711] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [130.990055] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500)

<7> [130.990507] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500)

<7> [130.990987] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 0, found 285500)

<7> [130.991500] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000039)

<7> [130.991974] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe

<7> [130.992466] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [130.992930] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [130.993405] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [130.993484] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [130.993526] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [130.993535] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe

<7> [130.994025] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [130.994555] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [130.995012] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [130.995037] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [130.995046] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe

<7> [130.995549] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [130.996002] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [130.996498] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [130.996517] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [130.997104] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [130.997573] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [130.998179] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.998684] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55

<7> [130.999006] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.999380] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.999817] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0

<7> [131.000249] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0

<7> [131.000743] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1142000 num active planes 1

<7> [131.001199] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 1142

<7> [131.001674] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point 0

<7> [131.002177] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (142750 kHz) > [CRTC:98:pipe A] min cdclk (0 kHz)

<7> [131.002690] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (22305 kHz) > old min cdclk (0 kHz)

<7> [131.003177] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [131.003724] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz

<7> [131.004227] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [131.004777] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:98:pipe A] allocated DPLL 0

<7> [131.005229] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:98:pipe A] reserving DPLL 0

<7> [131.005742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: yes [modeset]

<7> [131.006238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [131.006780] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [131.007282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [131.007825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [131.008222] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [131.008713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [131.009170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [131.009651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x39

<7> [131.010109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0

<7> [131.010597] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [131.010669] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [131.010708] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [131.010718] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [131.010742] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [131.010751] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [131.010768] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [131.010775] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [131.010783] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [131.010790] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00

<7> [131.010798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [131.011248] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [131.011661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [131.012059] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [131.012571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5

<7> [131.013031] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [131.013533] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500

<7> [131.013986] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0

<7> [131.014469] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [131.014921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [131.015384] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [131.015826] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [131.016251] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [131.016730] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [131.017143] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [131.017603] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [131.018059] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [131.018558] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [131.019019] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [131.019502] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [131.019934] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [131.020373] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [131.020803] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [131.021248] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [131.021735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:354] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [131.022171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [131.022689] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [131.023149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [131.023637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [131.023970] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [131.024299] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [131.024758] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no

<7> [131.025220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no

<7> [131.025707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no

<7> [131.038668] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [131.038919] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [131.039295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [131.039753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [131.040790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [131.041248] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [131.041669] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [131.042171] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [131.043509] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.043762] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.067010] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [131.067614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.067801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [131.068458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.069586] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.069736] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [131.069872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.070005] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [131.070145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [131.070269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [131.070415] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [131.070636] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B]

<7> [131.070753] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1]

<7> [131.070865] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A]

<7> [131.070976] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B]

<7> [131.071085] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C]

<7> [131.071194] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D]

<7> [131.071318] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2]

<7> [131.071450] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A]

<7> [131.071558] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B]

<7> [131.071666] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C]

<7> [131.071771] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D]

<7> [131.071877] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3]

<7> [131.071988] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A]

<7> [131.072098] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B]

<7> [131.072206] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C]

<7> [131.072325] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D]

<7> [131.072454] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4]

<7> [131.072561] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A]

<7> [131.072672] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B]

<7> [131.072782] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C]

<7> [131.072891] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D]

<7> [131.073034] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [131.073213] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [131.073396] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [131.073568] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [131.073744] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [131.073886] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [131.074007] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [131.074126] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5

<7> [131.074243] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6

<7> [131.074376] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [131.074551] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:98:pipe A]

<7> [131.074670] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [131.074846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [131.075040] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [131.075617] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [131.076129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [131.076265] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.077230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [131.077398] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6

<7> [131.077414] i915 0000:00:02.0: [drm:intel_enable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio

<7> [131.077675] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Enable audio codec on [CRTC:98:pipe A], 64 bytes ELD

<7> [131.086056] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults

<7> [131.086205] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000)

<7> [131.086347] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N

<6> [131.086493] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected

<6> [131.086496] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected

<6> [131.086498] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected

<6> [131.086500] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected

<7> [131.086531] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [131.086680] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]

<7> [131.094383] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [131.094790] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [131.095007] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A]

<7> [131.095463] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<6> [131.096296] [IGT] i915_pm_rpm: finished subtest basic-rte, SUCCESS

<7> [131.096462] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [131.096650] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [131.096832] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [131.097004] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [131.097178] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [131.097484] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [131.097661] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [131.097828] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [131.097997] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [131.098166] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [131.098352] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [131.098522] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [131.098694] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [131.098863] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0)

<7> [131.099036] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [131.099206] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0)

<7> [131.099386] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0)

<7> [131.099554] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0)

<7> [131.099726] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [131.099900] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [131.100065] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [131.100228] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [131.100406] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [131.100573] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [131.100742] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [131.100912] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0)

<7> [131.101078] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [131.101244] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0)

<7> [131.101433] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0)

<7> [131.101604] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0)

<7> [131.101772] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [131.101937] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [131.102106] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [131.102272] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no)

<7> [131.102447] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected yes, found no)

<7> [131.102608] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected yes, found no)

<7> [131.102806] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer

<7> [131.102972] expected: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [131.102975] expected: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [131.102978] expected: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [131.102981] expected: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03

<7> [131.102983] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.102986] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.102988] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.102991] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.102994] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [131.103161] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0)

<7> [131.103329] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0)

<7> [131.103490] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 285500, found 0)

<7> [131.103661] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000039, found 0x00000000)

<7> [131.103830] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe

<7> [131.104010] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [131.104176] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [131.104204] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [131.104219] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [131.104222] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [131.104398] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe

<7> [131.104559] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [131.104726] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [131.104735] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [131.104738] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [131.104906] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe

<7> [131.105068] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [131.105229] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [131.105234] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [131.105424] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [131.105601] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:98:pipe A] releasing DPLL 0

<7> [131.105821] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [131.105979] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [131.106187] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.106361] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0

<7> [131.106519] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.106676] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.106830] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.106982] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.107140] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0

<7> [131.107322] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [131.107518] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [131.107688] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [131.107856] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [131.108030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [modeset]

<7> [131.108203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [131.108388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [131.108556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [131.108726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [131.108894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [131.109067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no

<7> [131.109238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no

<7> [131.109430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no

<7> [131.111070] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Disable audio codec on [CRTC:98:pipe A]

<7> [131.116511] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [131.127720] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [131.127884] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [131.128550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [131.128707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.129215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [131.129368] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6

<7> [131.129387] i915 0000:00:02.0: [drm:intel_disable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio

<7> [131.129536] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [131.136374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [131.136579] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:98:pipe A]

<7> [131.136770] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [131.136953] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]

<7> [131.137124] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [131.137452] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B]

<7> [131.137702] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1]

<7> [131.137929] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A]

<7> [131.138150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B]

<7> [131.138395] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C]

<7> [131.138616] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D]

<7> [131.138840] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2]

<7> [131.139063] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A]

<7> [131.139278] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B]

<7> [131.139535] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C]

<7> [131.139762] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D]

<7> [131.139988] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3]

<7> [131.140209] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A]

<7> [131.140444] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B]

<7> [131.140658] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C]

<7> [131.140880] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D]

<7> [131.141092] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4]

<7> [131.141316] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A]

<7> [131.141536] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B]

<7> [131.141760] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C]

<7> [131.141981] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D]

<7> [131.142194] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [131.142462] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [131.142703] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [131.142925] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [131.143121] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [131.143348] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [131.143538] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [131.143728] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [131.143919] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5

<7> [131.144106] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6

<7> [131.144318] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [131.144550] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [131.144797] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A]

<7> [131.145328] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [131.172295] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [131.172320] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [131.172326] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [131.172332] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [131.172337] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [131.172342] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [131.172347] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [131.172353] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [131.172866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [131.173046] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.173680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [131.173814] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [131.173831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [131.174096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [131.174226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [131.174385] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.174531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.175664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.175803] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [131.175811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [131.175922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.176049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.176177] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.176909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.177080] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.177250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.177459] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [131.177469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [131.177634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.177805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.177934] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.178663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.178793] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.178908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.179032] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [131.179038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [131.179145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.179260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.179399] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.180109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.180232] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.180370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.180506] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [131.180527] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [131.180635] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [131.183483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.184572] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.184730] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [131.184865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.184997] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [131.185148] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [131.185354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [131.185515] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.185680] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [131.185803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [131.185955] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [131.210672] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [131.210779] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [131.210931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [131.211100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [131.211536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [131.211757] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [131.211895] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [131.212149] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [131.212923] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.213065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.225270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [131.225422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.225614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.225807] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.226630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.226842] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.227014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.227217] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [131.230080] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [131.230133] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [131.232293] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.233403] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.233631] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [131.233854] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.234074] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [131.234275] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [131.234549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [131.234746] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.234938] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [131.235080] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [131.235253] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [131.261423] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [131.261518] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [131.261649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [131.261799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [131.262413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [131.262667] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [131.262844] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [131.263092] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [131.263807] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.263926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.279333] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [131.279473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.352309] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [131.352320] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [131.352324] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [131.352327] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [131.352331] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [131.352334] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [131.352338] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [131.352342] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [131.354844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [131.354992] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.356186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [131.356295] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [131.356326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.356473] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [131.359312] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [131.359324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [131.361523] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.362629] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.362778] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [131.362965] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.363152] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [131.363382] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [131.363605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [131.363768] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.363933] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [131.364056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [131.364204] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [131.388734] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [131.388865] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [131.389073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [131.389298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [131.389900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [131.390292] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [131.390595] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [131.390930] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [131.392063] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.392258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.409974] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [131.410062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.410190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.410347] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.411124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.411254] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.411394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.411568] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [131.411711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.411892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [131.412600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.413731] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.413933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [131.414123] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.414344] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [131.414845] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [131.415030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.415214] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.415496] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [131.415645] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.415768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.416909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.417078] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.417195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.417350] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [131.420199] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [131.420210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [131.422400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.423522] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.423663] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [131.423799] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.423933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [131.424086] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [131.424515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [131.424682] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.424843] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [131.424960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [131.425107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [131.449767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [131.449939] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [131.450220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [131.450585] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [131.451259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [131.451649] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [131.451917] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [131.452289] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [131.453789] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.454058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.470800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [131.470890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.471014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.471142] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.473025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.473179] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.473329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.473472] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [131.473486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [131.473596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.473717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.473848] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.475628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.475756] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.475872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.476003] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [131.478895] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [131.478915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [131.485510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.486614] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.486774] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [131.486963] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.487151] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [131.487381] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [131.487605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [131.487768] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.487931] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [131.488056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [131.488206] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [131.512841] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [131.512989] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [131.513220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [131.513522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [131.514211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [131.514614] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [131.514862] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [131.515182] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [131.516405] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.516610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.539800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [131.539930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.617776] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [131.617786] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [131.617790] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [131.617793] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [131.617797] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [131.617801] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [131.617804] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [131.617808] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [131.620100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [131.620252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.621361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [131.621470] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [131.621486] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.621629] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [131.621643] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [131.621759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.621885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.622030] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.622745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.622891] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.623017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.623145] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [131.623157] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [131.623270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.623424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.623563] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.625348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.625526] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.625695] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.625886] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [131.628730] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [131.628739] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [131.633198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.634244] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.634445] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [131.634627] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.634809] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [131.634971] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [131.635188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [131.635365] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.635563] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [131.635699] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [131.635845] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [131.659925] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [131.660052] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [131.660251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [131.660537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [131.661345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [131.661658] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [131.661880] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [131.662189] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [131.663384] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.663582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.684564] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [131.684649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.684778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.684906] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.686790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.686967] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.687132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.687333] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [131.687352] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [131.692390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.693499] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.693682] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [131.693856] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.693988] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [131.694139] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [131.694393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [131.694562] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.694724] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [131.694845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [131.694994] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [131.719813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [131.719910] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [131.720041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [131.720196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [131.720711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [131.720988] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [131.721195] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [131.721506] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [131.723027] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.723695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.753706] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [131.753890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.754109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [131.754876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.756047] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.756195] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [131.756342] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.756473] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [131.756679] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [131.756850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.757034] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.757261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [131.757453] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.757592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.758735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.758904] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.759023] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.759163] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [131.762018] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [131.762037] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [131.768633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.769742] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.769939] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [131.770132] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.770340] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [131.770558] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [131.770783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [131.770945] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.771110] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [131.771246] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [131.771439] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [131.795967] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [131.796078] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [131.796247] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [131.796471] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [131.797388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [131.798050] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [131.798493] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [131.799037] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [131.800657] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.800933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.824186] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [131.824324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.904872] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [131.904887] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [131.904893] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [131.904898] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [131.904904] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [131.904908] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [131.904911] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [131.904915] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [131.907571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [131.907742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.910228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [131.910394] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [131.910419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.910576] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [131.910584] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [131.910698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.910824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.910953] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.912043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.912199] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.912341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.912480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [131.915273] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [131.915281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [131.917481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.918601] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.918746] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [131.918881] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.919012] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [131.919161] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [131.919385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [131.919548] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.919707] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [131.919823] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [131.919967] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [131.943832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [131.943928] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [131.944063] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [131.944215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [131.944718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [131.944962] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [131.945138] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [131.945504] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [131.946298] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.946491] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.969697] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [131.969816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.969941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.970069] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.971917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.972098] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.972267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.972480] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [131.972492] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [131.972654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.972823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.972996] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.973760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.973909] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.974077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.974255] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [131.974263] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [131.974443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.974615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [131.974793] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [131.975574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [131.975751] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [131.975916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.976101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [131.978966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.980081] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.980274] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [131.980473] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.980655] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [131.980860] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [131.981072] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [131.981096] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [131.981276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [131.981514] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [131.981738] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [131.981903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [131.982104] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [132.006860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.006955] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [132.007088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [132.007239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [132.007731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [132.007971] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [132.008143] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [132.008428] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [132.009228] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [132.009444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [132.027194] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.027331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.111713] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [132.111723] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [132.111727] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [132.111730] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [132.111734] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [132.111738] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [132.111741] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [132.111745] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [132.113956] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [132.114122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.115210] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [132.115381] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [132.115406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.115602] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [132.115613] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [132.115778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.115954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.116133] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.116903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.117079] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.117240] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.117440] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.120274] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [132.120283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [132.121425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [132.122504] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.122697] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [132.122882] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.123066] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [132.123280] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [132.123576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [132.123795] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.124013] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [132.124182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [132.124394] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [132.149065] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.149178] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [132.149384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [132.149640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [132.150202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [132.150563] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [132.150816] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [132.151167] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [132.152420] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [132.152598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [132.170239] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.170391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.170568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.170748] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.172578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.172760] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.172926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.173115] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [132.173127] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [132.173288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.173486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.173657] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.174403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.174582] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.174748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.174925] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [132.174933] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [132.175093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.175259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.175513] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.177345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.177524] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.177689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.177874] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.180709] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [132.180728] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [132.184030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [132.185138] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.185328] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [132.185514] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.185694] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [132.185906] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [132.186174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [132.186406] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.186627] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [132.186795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [132.186999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [132.210871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.210977] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [132.211129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [132.211300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [132.211939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [132.212351] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [132.212687] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [132.213124] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [132.214565] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [132.214737] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [132.231317] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.231406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.306567] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [132.306580] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [132.306584] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [132.306588] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [132.306591] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [132.306595] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [132.306598] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [132.306602] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [132.308803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [132.308985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.310067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [132.310219] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [132.310244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.310462] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [132.310474] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [132.310642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.310818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.311000] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.311771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.311902] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.312043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.312233] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.315088] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [132.315098] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [132.317295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [132.318420] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.318610] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [132.318798] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.318982] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [132.319195] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [132.319478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [132.319689] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.319900] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [132.320059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [132.320258] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [132.344872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.344998] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [132.345188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [132.345455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [132.346058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [132.346428] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [132.346705] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [132.347100] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [132.348396] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [132.348651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [132.366295] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.366462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.366642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.366817] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.368645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.368816] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.368983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.369170] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [132.369182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [132.369357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.369532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.369705] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.370468] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.370611] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.370776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.370959] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [132.370967] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [132.371127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.371299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.371518] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.372276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.372475] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.372621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.372808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.375647] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [132.375666] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [132.377874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [132.378974] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.379158] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [132.379346] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.379527] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [132.379745] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [132.380014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [132.380231] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.380466] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [132.380633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [132.380834] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [132.405548] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.405648] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [132.405792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [132.405952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [132.406430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [132.406683] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [132.406869] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [132.407229] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [132.408518] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [132.408816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [132.428800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.428933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.512626] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [132.512637] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [132.512640] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [132.512643] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [132.512647] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [132.512651] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [132.512654] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [132.512658] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [132.515085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [132.515250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.516336] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [132.516491] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [132.516515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.516709] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [132.516720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [132.516884] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.517065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.517244] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.518021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.518200] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.518393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.518584] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.521419] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [132.521428] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [132.524738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [132.525848] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.526036] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [132.526220] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.526422] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [132.526636] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [132.526909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [132.527124] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.527351] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [132.527516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [132.527714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [132.552491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.552601] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [132.552764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [132.552946] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [132.553481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [132.553764] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [132.553982] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [132.554370] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [132.555413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [132.555651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [132.578866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.579007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.579183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.579382] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.580144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.580339] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.580508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.580704] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.583540] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [132.583552] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [132.584711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [132.585774] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.585965] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [132.586152] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.586346] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [132.586558] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [132.586808] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [132.587027] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.587245] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [132.587425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [132.587627] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [132.612361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.612466] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [132.612619] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [132.612791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [132.613616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [132.614088] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [132.614518] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [132.615059] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [132.616592] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [132.616880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [132.637950] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.638084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.638261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.638458] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.639217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.639410] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.639576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.639765] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [132.639777] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [132.639936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.640101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.640270] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.641059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.641235] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.641419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.641608] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.644447] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [132.644466] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [132.647771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [132.648879] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.649063] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [132.649241] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.649440] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [132.649654] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [132.649931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [132.650148] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.650376] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [132.650538] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [132.650735] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [132.675423] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.675520] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [132.675651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [132.675808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [132.676390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [132.676858] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [132.677254] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [132.677816] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [132.679466] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [132.679757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [132.699716] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.699845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.783469] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [132.783479] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [132.783482] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [132.783486] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [132.783489] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [132.783493] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [132.783496] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [132.783500] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [132.785801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [132.785961] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.787049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [132.787197] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [132.787221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.787425] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [132.787436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [132.787593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.787768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.787944] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.788719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.788895] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.789057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.789239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.792100] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [132.792109] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [132.795418] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [132.796526] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.796709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [132.796886] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.797060] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [132.797272] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [132.797562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [132.797775] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.797990] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [132.798156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [132.798365] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [132.822937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.823035] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [132.823166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [132.823344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [132.824019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [132.824258] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [132.824454] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [132.824734] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [132.825562] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [132.825742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [132.843408] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.843535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.843720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.843898] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.845723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.845854] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.846017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.846208] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [132.846220] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [132.846400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.846577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.846760] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.847528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.847704] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.847868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.848043] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [132.848051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [132.848210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.848412] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.848590] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.849356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.849530] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.849691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.849877] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.852714] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [132.852733] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [132.856034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [132.857142] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.857336] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [132.857519] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.857704] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [132.857916] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [132.858193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [132.858424] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [132.858643] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [132.858810] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [132.859013] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [132.883732] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.883826] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [132.883959] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [132.884109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [132.884699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [132.884941] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [132.885113] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [132.885811] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [132.887106] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [132.887422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [132.910697] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.910794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.991055] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [132.991066] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [132.991069] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [132.991073] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [132.991077] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [132.991080] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [132.991084] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [132.991088] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [132.991696] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [132.991917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.993128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [132.993278] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [132.993302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.993514] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [132.993525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [132.993696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.993873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [132.994046] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [132.994821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [132.995000] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [132.995159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.995357] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.998195] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [132.998203] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [132.999319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.000424] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.000618] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [133.000805] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.000985] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [133.001198] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [133.001484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [133.001698] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.001914] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [133.002079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [133.002277] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.027032] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.027128] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [133.027260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [133.027447] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [133.027971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [133.028201] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [133.028394] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [133.028825] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [133.029831] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.030028] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.053178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.053314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.053498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.053679] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.055510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.055687] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.055853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.056047] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [133.056059] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [133.056224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.056416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.056593] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.057359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.057533] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.057701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.057882] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [133.057890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [133.058056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.058228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.058435] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.059190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.059383] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.059551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.059740] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.062574] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [133.062592] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [133.065896] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.067006] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.067196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [133.067397] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.067576] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [133.067790] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [133.068074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [133.068291] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.068529] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [133.068693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [133.068892] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.093611] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.093705] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [133.093839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [133.093990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [133.094545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [133.094956] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [133.095280] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [133.095768] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [133.097297] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.097593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.120833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.120920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.202771] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [133.202783] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [133.202787] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [133.202791] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [133.202796] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [133.202800] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [133.202804] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [133.202808] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [133.204959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [133.205099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [133.205641] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [133.205752] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [133.205768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.205901] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [133.205909] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [133.206018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.206140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.206269] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.206991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.207118] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.207232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.207390] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.210225] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [133.210234] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [133.212426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.213556] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.213707] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [133.213840] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.213969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [133.214118] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [133.214344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [133.214512] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.214671] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [133.214791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [133.214941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.239615] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.239732] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [133.239904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [133.240096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [133.240726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [133.240957] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [133.241119] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [133.241648] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [133.242685] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.242887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.258371] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.258451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.258577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.258704] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.260599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.260731] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.260848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.260985] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.263867] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [133.263879] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [133.270479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.271602] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.271747] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [133.271882] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.272014] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [133.272166] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [133.272384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [133.272545] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.272747] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [133.272923] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [133.273127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.297847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.297995] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [133.298225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [133.298582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [133.299497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [133.299844] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [133.300117] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [133.300560] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [133.301926] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.302125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.319852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.319943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.320071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.320197] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.320986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.321128] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.321245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.321406] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [133.321415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [133.321527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.321646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.321772] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.323559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.323689] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.323807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.323938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.326823] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [133.326843] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [133.333439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.334561] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.334712] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [133.334843] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.334971] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [133.335121] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [133.335346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [133.335529] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.335693] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [133.335820] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [133.335994] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.360672] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.360787] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [133.360955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [133.361141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [133.361822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [133.362202] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [133.362540] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [133.362998] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [133.364502] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.364730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.387935] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.388069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.467064] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [133.467074] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [133.467078] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [133.467081] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [133.467085] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [133.467088] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [133.467092] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [133.467096] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [133.469702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [133.469880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [133.472547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [133.472703] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [133.472720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.472859] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [133.472871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [133.472981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.473105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.473236] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.473964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.474092] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.474208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.474366] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.477202] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [133.477211] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [133.478386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.479431] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.479568] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [133.479700] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.479835] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [133.479985] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [133.480194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [133.480379] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.480558] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [133.480679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [133.480825] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.505450] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.505545] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [133.505679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [133.505830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [133.506257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [133.506471] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [133.506620] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [133.506864] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [133.507585] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.507708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.527512] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.527599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.527726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.527855] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.529740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.529865] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.529988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.530125] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.533008] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [133.533020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [133.539621] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.540748] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.540930] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [133.541065] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.541199] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [133.541379] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [133.541604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [133.541765] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.541924] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [133.542040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [133.542184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.566819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.566938] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [133.567116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [133.567446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [133.568217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [133.568691] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [133.568985] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [133.569388] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [133.570708] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.570894] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.591859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.592009] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.592185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.592361] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.594164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.594301] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.594435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.594574] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [133.594584] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [133.594695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.594815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.594950] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.595659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.595782] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.595946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.596126] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [133.596147] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [133.596323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.678082] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [133.678092] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [133.678096] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [133.678099] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [133.678103] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [133.678107] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [133.678110] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [133.678114] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [133.680718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [133.680890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [133.683537] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [133.683698] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [133.683722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.683881] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [133.683888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [133.684000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.684124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.684256] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.685188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.685323] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.685437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.685560] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [133.685566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [133.685675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.685800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.685927] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.686651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.686776] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.686915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.687043] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [133.687048] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [133.687158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.687278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.687425] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.689201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.689389] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.689556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.689738] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [133.689746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [133.689904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.690072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.690202] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.691989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.692120] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.692250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.692388] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [133.692397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.700772] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.701879] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.702067] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [133.702238] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.702389] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [133.702548] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [133.702765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [133.702935] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.703100] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [133.703218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [133.703385] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.766537] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:308:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [133.767018] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [133.767422] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:98:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [133.767868] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:307:DDI B/PHY B] [CRTC:98:pipe A]

<7> [133.768196] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [133.768601] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [133.769039] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [133.769430] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [133.769835] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [133.770214] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [133.770693] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [133.771052] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [133.771456] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [133.771858] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [133.772226] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [133.772608] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [133.772975] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [133.773343] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144)

<7> [133.773751] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [133.774127] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144)

<7> [133.774534] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083)

<7> [133.774901] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088)

<7> [133.775244] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [133.775797] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [133.776231] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [133.776817] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [133.777172] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [133.777566] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [133.777927] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [133.778269] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144)

<7> [133.778693] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<6> [133.778959] ahci 0000:00:17.0: port does not support device sleep

<7> [133.779059] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144)

<7> [133.779383] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083)

<7> [133.779714] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088)

<7> [133.779970] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [133.780234] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [133.780521] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [133.780797] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes)

<7> [133.781052] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected no, found yes)

<7> [133.781301] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected no, found yes)

<7> [133.781589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer

<7> [133.781853] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.781856] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.781859] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.781862] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.781865] found: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [133.781868] found: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [133.781871] found: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [133.781873] found: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03

<7> [133.781877] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [133.782076] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500)

<7> [133.782268] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500)

<7> [133.782504] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 0, found 285500)

<7> [133.782763] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000039)

<7> [133.782953] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe

<7> [133.783140] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [133.783353] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [133.783566] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [133.783596] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [133.783612] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [133.783616] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe

<7> [133.783811] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [133.784026] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [133.784328] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [133.784346] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [133.784352] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe

<7> [133.784637] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [133.784894] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [133.785084] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [133.785094] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [133.785360] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [133.785518] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [133.785662] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [133.785789] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55

<7> [133.785918] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [133.786039] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [133.786159] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0

<7> [133.786278] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0

<7> [133.786424] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1142000 num active planes 1

<7> [133.786578] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 1142

<7> [133.786771] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point 0

<7> [133.786989] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (142750 kHz) > [CRTC:98:pipe A] min cdclk (0 kHz)

<7> [133.787190] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (22305 kHz) > old min cdclk (0 kHz)

<7> [133.787413] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [133.787560] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz

<7> [133.787694] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [133.787827] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:98:pipe A] allocated DPLL 0

<7> [133.787948] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:98:pipe A] reserving DPLL 0

<7> [133.788068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: yes [modeset]

<7> [133.788188] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [133.788323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [133.788445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [133.788566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [133.788732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [133.788896] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [133.789059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [133.789231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x39

<7> [133.789409] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0

<7> [133.789552] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [133.789569] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [133.789579] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [133.789581] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [133.789587] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [133.789589] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [133.789593] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [133.789595] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [133.789597] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [133.789598] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00

<7> [133.789600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [133.789716] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [133.789831] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [133.789948] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [133.790067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5

<7> [133.790186] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [133.790320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500

<7> [133.790461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0

<7> [133.790599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [133.790720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [133.790840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [133.790958] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [133.791073] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [133.791189] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [133.791315] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [133.791473] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [133.791647] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [133.791815] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [133.791978] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [133.792143] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [133.792324] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [133.792474] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [133.792639] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [133.792765] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [133.792903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:355] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [133.793025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [133.793142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [133.793259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [133.793393] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [133.793534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [133.793650] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [133.793774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no

<7> [133.793893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no

<7> [133.794013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no

<7> [133.805553] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.805642] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [133.805773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [133.805924] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [133.806273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [133.806699] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [133.806825] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [133.807057] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [133.807817] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.807939] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.817866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.818108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.818235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [133.818954] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.820108] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.820250] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [133.820402] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [133.820551] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [133.820704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [133.820834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [133.820985] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [133.821195] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B]

<7> [133.821323] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1]

<7> [133.821462] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A]

<7> [133.821576] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B]

<7> [133.821721] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C]

<7> [133.821850] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D]

<7> [133.821979] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2]

<7> [133.822088] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A]

<7> [133.822196] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B]

<7> [133.822314] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C]

<7> [133.822436] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D]

<7> [133.822541] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3]

<7> [133.822653] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A]

<7> [133.822765] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B]

<7> [133.822884] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C]

<7> [133.822993] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D]

<7> [133.823100] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4]

<7> [133.823213] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A]

<7> [133.823340] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B]

<7> [133.823464] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C]

<7> [133.823574] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D]

<7> [133.823714] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [133.823859] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [133.823981] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [133.824104] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [133.824226] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [133.824371] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [133.824499] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [133.824626] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5

<7> [133.824742] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6

<7> [133.824860] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [133.825016] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:98:pipe A]

<7> [133.825135] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [133.825327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [133.825584] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [133.826179] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [133.826666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [133.826779] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [133.827205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [133.827349] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6

<7> [133.827367] i915 0000:00:02.0: [drm:intel_enable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio

<7> [133.827620] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Enable audio codec on [CRTC:98:pipe A], 64 bytes ELD

<7> [133.836094] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults

<7> [133.836243] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000)

<7> [133.836434] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N

<6> [133.836580] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected

<6> [133.836583] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected

<6> [133.836586] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected

<6> [133.836588] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected

<7> [133.836619] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [133.836765] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]

<7> [133.844327] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [133.844763] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [133.844980] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A]

<7> [133.845495] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [133.848318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [133.873693] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [133.881747] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [133.881767] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [133.881770] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [133.881773] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [133.881776] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [133.881779] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [133.881781] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [133.881785] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [133.882119] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [133.882269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [133.882804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [133.882913] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [133.882936] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:308:HDMI-A-1] Same epoch counter 10

<7> [133.883107] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [133.883272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.883494] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.883665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.883794] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.883912] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [133.886599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<6> [133.886674] Console: switching to colour frame buffer device 240x67

<7> [133.886736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.886874] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.887025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.887151] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.887270] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [133.887486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [133.887679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.887869] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.888071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.888201] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.888343] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [133.894504] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [133.894688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [133.894866] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [133.895069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [133.895248] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [133.895420] i915 0000:00:02.0: [drm:check_connector_changed] [CONNECTOR:346:DP-4] Same epoch counter 1

Results for igt@i915_pm_rpm@basic-rte