igt@i915_selftest@live@active on fi-skl-guc@linus-v6.6-rc2 Test details

Detail	Value
Igt-Version	IGT-Version: 1.28-g2aaeef0cd (x86_64) (Linux: 6.6.0-rc2-linus-v6.6-rc2-gce9ecca0238b+ x86_64)
Out	Starting dynamic subtest: active Dynamic subtest active: SUCCESS (0.567s)
Err	Starting dynamic subtest: active Dynamic subtest active: SUCCESS (0.567s)
Dmesg	<6> [229.884468] [IGT] i915_selftest: starting dynamic subtest active <5> [229.979640] Setting dangerous option enable_guc - tainting kernel <5> [229.979647] Setting dangerous option live_selftests - tainting kernel <7> [230.013310] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [230.013537] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [230.013708] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [230.013718] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [230.013876] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [230.014084] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [230.014236] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [230.014871] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [230.015042] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [230.015174] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [230.015300] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [230.015305] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [230.015804] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [230.015820] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [230.015974] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [230.016405] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018 <7> [230.016579] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [230.016755] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [230.016902] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [230.017050] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [230.020991] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [230.021191] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [230.021363] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [230.021521] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [230.021679] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [230.021812] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [230.021961] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [230.022116] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [230.022234] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [230.022339] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [230.022460] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [230.022577] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [230.022680] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [230.022783] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [230.023227] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [230.023429] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [230.023605] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [230.023768] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [230.023957] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [230.024119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [230.024291] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [230.024497] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [230.024705] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [230.024868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [230.025056] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [230.025241] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [230.025400] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [230.025581] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [230.025791] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [230.025959] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [230.026121] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [230.026317] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [230.026479] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [230.026636] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [230.026836] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [230.027035] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [230.027193] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [230.027381] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [230.027540] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8 <7> [230.027696] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [230.027852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [230.028045] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [230.028283] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [230.028501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [230.028690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [230.028866] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [230.029027] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [230.029185] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [230.029401] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [230.029640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [230.029798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [230.029978] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [230.030146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [230.030351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [230.030554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [230.030754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [230.030914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [230.031125] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <6> [230.032197] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <6> [230.032269] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled <7> [230.032272] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 <7> [230.032654] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [230.032842] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [230.032995] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [230.033144] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [230.033312] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [230.033461] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [230.033609] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [230.033756] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [230.033903] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [230.034050] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [230.035232] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [230.036718] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [230.037079] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [230.037306] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [230.037800] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C] <7> [230.037949] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [230.038164] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] Using AUX CH D (VBT) <7> [230.038337] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D] <7> [230.038687] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [230.038871] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D] <7> [230.039016] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [230.039278] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] Using AUX CH A (VBT) <7> [230.039435] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E] <7> [230.039646] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [230.040061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [230.040278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [230.040483] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [230.040642] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [230.040835] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [230.040993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [230.041151] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [230.041319] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [230.041475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [230.041631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [230.041812] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [230.041969] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [230.042160] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [230.042358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A <7> [230.042517] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A <7> [230.042691] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A <7> [230.042854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B <7> [230.043006] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C <7> [230.043162] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A <7> [230.043335] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [230.043498] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [230.043658] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [230.043838] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [230.044068] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [230.044273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled <7> [230.044437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled <7> [230.044633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled <7> [230.044795] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled <7> [230.044947] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [230.045097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [230.045260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [230.045410] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [230.045595] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [230.045750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [230.045934] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [230.046113] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [230.046285] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [230.046462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [230.046626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [230.046777] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [230.046974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [230.047132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [230.047316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [230.047473] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [230.047653] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [230.047831] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [230.048009] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [230.050244] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K) <7> [230.050451] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [230.050577] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [230.050712] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [230.050859] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [230.051879] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [230.052055] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [230.052204] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0 <7> [230.055052] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [230.055248] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [230.055424] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [230.076558] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f <7> [230.076737] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [230.076888] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [230.077036] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [230.077185] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2 <7> [230.077343] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006 <7> [230.077492] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [230.077640] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [230.077788] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [230.077935] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [230.078083] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [230.078262] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [230.078434] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [230.078613] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [230.078763] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [230.080007] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [230.080011] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [230.084335] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [230.084787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [230.084962] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [230.084965] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [230.094261] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [230.094888] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [230.095050] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [230.095218] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [230.095376] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [230.095552] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [230.096031] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [230.096163] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [230.096298] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [230.096423] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [230.098609] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [230.098922] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event <7> [230.099201] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 <7> [230.099853] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event <7> [230.100232] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event <7> [230.100608] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 <7> [230.101280] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event <6> [230.101333] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [230.103031] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [230.117730] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [230.118480] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input73 <7> [230.119102] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [230.119605] [drm:drm_client_modeset_probe] <7> [230.119583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [230.119680] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [230.119690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [230.119909] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [230.119926] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [230.119819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [230.119934] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] <7> [230.119942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [230.120151] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] status updated from unknown to disconnected <7> [230.120050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [230.120164] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected <7> [230.120170] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] <7> [230.120177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [230.120292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [230.120500] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] status updated from unknown to disconnected <7> [230.120514] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected <7> [230.120528] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] <7> [230.120535] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [230.120792] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected <7> [230.120808] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected <7> [230.120821] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] <7> [230.120828] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [230.120902] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [230.121085] i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9 <7> [230.121090] i915 device info: graphics version: 9 <7> [230.121093] i915 device info: media version: 9 <7> [230.121095] i915 device info: graphics stepping: G0 <7> [230.121098] i915 device info: media stepping: G0 <7> [230.121097] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] status updated from unknown to disconnected <7> [230.121101] i915 device info: display stepping: G0 <7> [230.121103] i915 device info: base die stepping: ** <7> [230.121104] i915 device info: gt: 2 <7> [230.121107] i915 device info: memory-regions: 0x21 <7> [230.121110] i915 device info: page-sizes: 0x11000 <7> [230.121113] i915 device info: platform: SKYLAKE <7> [230.121115] i915 device info: ppgtt-size: 48 <7> [230.121116] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected <7> [230.121118] i915 device info: ppgtt-type: 2 <7> [230.121120] i915 device info: dma_mask_size: 39 <7> [230.121121] i915 device info: is_mobile: no <7> [230.121123] i915 device info: is_lp: no <7> [230.121126] i915 device info: require_force_probe: no <7> [230.121128] i915 device info: is_dgfx: no <7> [230.121131] i915 device info: has_64bit_reloc: yes <7> [230.121131] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [230.121135] i915 device info: has_64k_pages: no <7> [230.121135] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [230.121138] i915 device info: gpu_reset_clobbers_display: no <7> [230.121139] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [230.121142] i915 device info: has_reset_engine: yes <7> [230.121143] i915 device info: has_3d_pipeline: yes <7> [230.121145] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [230.121146] i915 device info: has_4tile: no <7> [230.121149] i915 device info: has_flat_ccs: no <7> [230.121149] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [230.121152] i915 device info: has_global_mocs: no <7> [230.121152] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [230.121156] i915 device info: has_gmd_id: no <7> [230.121158] i915 device info: has_gt_uc: yes <7> [230.121160] i915 device info: has_heci_pxp: no <7> [230.121161] i915 device info: has_heci_gscfi: no <7> [230.121163] i915 device info: has_guc_deprivilege: no <7> [230.121164] i915 device info: has_l3_ccs_read: no <7> [230.121166] i915 device info: has_l3_dpf: no <7> [230.121167] i915 device info: has_llc: yes <7> [230.121169] i915 device info: has_logical_ring_contexts: yes <7> [230.121170] i915 device info: has_logical_ring_elsq: no <7> [230.121171] i915 device info: has_media_ratio_mode: no <7> [230.121172] i915 device info: has_mslice_steering: no <7> [230.121173] i915 device info: has_oa_bpc_reporting: no <7> [230.121175] i915 device info: has_oa_slice_contrib_limits: no <7> [230.121176] i915 device info: has_oam: no <7> [230.121178] i915 device info: has_one_eu_per_fuse_bit: no <7> [230.121179] i915 device info: has_pxp: no <7> [230.121180] i915 device info: has_rc6: yes <7> [230.121182] i915 device info: has_rc6p: no <7> [230.121183] i915 device info: has_rps: yes <7> [230.121185] i915 device info: has_runtime_pm: yes <7> [230.121186] i915 device info: has_snoop: no <7> [230.121188] i915 device info: has_coherent_ggtt: yes <7> [230.121189] i915 device info: tuning_thread_rr_after_dep: no <7> [230.121190] i915 device info: unfenced_needs_alignment: no <7> [230.121192] i915 device info: hws_needs_physical: no <7> [230.121193] i915 device info: has_pooled_eu: no <7> [230.121195] i915 device info: rawclk rate: 24000 kHz <7> [230.121197] i915 device info: display version: 9 <7> [230.121201] i915 device info: cursor_needs_physical: no <7> [230.121203] i915 device info: has_cdclk_crawl: no <7> [230.121206] i915 device info: has_cdclk_squash: no <7> [230.121209] i915 device info: has_ddi: yes <7> [230.121210] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [230.121231] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [230.121252] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [230.121270] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [230.121625] i915 device info: has_dp_mst: yes <7> [230.121627] i915 device info: has_dsb: no <7> [230.121629] i915 device info: has_fpga_dbg: yes <7> [230.121630] i915 device info: has_gmch: no <7> [230.121631] i915 device info: has_hotplug: yes <7> [230.121633] i915 device info: has_hti: no <7> [230.121634] i915 device info: has_ipc: yes <7> [230.121636] i915 device info: has_overlay: no <7> [230.121637] i915 device info: has_psr: yes <7> [230.121639] i915 device info: has_psr_hw_tracking: yes <7> [230.121640] i915 device info: overlay_needs_physical: no <7> [230.121642] i915 device info: supports_tv: no <7> [230.121643] i915 device info: has_hdcp: yes <7> [230.121645] i915 device info: has_dmc: yes <7> [230.121646] i915 device info: has_dsc: no <7> [230.121648] i915 device info: iommu: enabled <7> [230.121649] i915 device info: available engines: 40403 <7> [230.121651] i915 device info: slice total: 1, mask=0001 <7> [230.121653] i915 device info: subslice total: 3 <7> [230.121654] i915 device info: slice0: 3 subslices, mask=00000007 <7> [230.121656] i915 device info: slice1: 0 subslices, mask=00000000 <7> [230.121658] i915 device info: slice2: 0 subslices, mask=00000000 <7> [230.121660] i915 device info: EU total: 24 <7> [230.121661] i915 device info: EU per subslice: 8 <7> [230.121663] i915 device info: has slice power gating: no <7> [230.121664] i915 device info: has subslice power gating: no <7> [230.121666] i915 device info: has EU power gating: yes <6> [230.121667] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [230.121669] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [230.121671] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [230.121673] i915: Performing live selftests with st_random_seed=0x85fbdbc0 st_timeout=500 <6> [230.121675] i915: Running active <6> [230.121685] i915: Running i915_active_live_selftests/live_active_wait <7> [230.121978] [drm:drm_client_modeset_probe] <7> [230.122027] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [230.122035] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [230.122262] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [230.122270] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] <7> [230.122277] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [230.122487] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected <7> [230.122494] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] <7> [230.122501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [230.122710] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected <7> [230.122718] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] <7> [230.122725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [230.122998] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected <7> [230.123006] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] <7> [230.123013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [230.123269] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected <7> [230.123277] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [230.123282] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [230.123287] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [230.123292] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [230.123296] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [230.123301] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [230.123364] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [230.123375] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [230.123394] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [230.123406] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [230.123472] [drm:drm_client_modeset_probe] <7> [230.123516] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [230.123524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [230.123736] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [230.123744] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] <7> [230.123751] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [230.123959] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected <7> [230.123966] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] <7> [230.123973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [230.124184] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected <7> [230.124191] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] <7> [230.124198] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [230.124427] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected <7> [230.124434] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] <7> [230.124441] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [230.124653] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected <7> [230.124660] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [230.124665] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [230.124669] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [230.124674] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [230.124679] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [230.124684] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [230.124715] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [230.124726] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [230.124745] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [230.124756] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [230.125912] i915: Running i915_active_live_selftests/live_active_retire <6> [230.127098] i915: Running i915_active_live_selftests/live_active_barrier <7> [230.127957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [230.128133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [230.128313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [230.128474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [230.155483] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [230.202825] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [230.257627] i915: probe of 0000:00:02.0 failed with error -25 <6> [230.452157] [IGT] i915_selftest: finished subtest active, SUCCESS

<6> [229.884468] [IGT] i915_selftest: starting dynamic subtest active

<5> [229.979640] Setting dangerous option enable_guc - tainting kernel

<5> [229.979647] Setting dangerous option live_selftests - tainting kernel

<7> [230.013310] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [230.013537] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [230.013708] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [230.013718] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [230.013876] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [230.014084] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [230.014236] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [230.014871] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [230.015042] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [230.015174] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [230.015300] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [230.015305] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [230.015804] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [230.015820] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [230.015974] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [230.016405] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018

<7> [230.016579] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [230.016755] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [230.016902] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [230.017050] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [230.020991] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [230.021191] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [230.021363] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [230.021521] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [230.021679] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [230.021812] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [230.021961] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [230.022116] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [230.022234] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [230.022339] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [230.022460] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [230.022577] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [230.022680] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [230.022783] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [230.023227] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [230.023429] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [230.023605] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [230.023768] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [230.023957] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [230.024119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [230.024291] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [230.024497] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [230.024705] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [230.024868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [230.025056] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [230.025241] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [230.025400] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [230.025581] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [230.025791] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [230.025959] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [230.026121] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [230.026317] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [230.026479] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [230.026636] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [230.026836] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [230.027035] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [230.027193] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [230.027381] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [230.027540] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8

<7> [230.027696] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [230.027852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [230.028045] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [230.028283] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [230.028501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [230.028690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [230.028866] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [230.029027] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [230.029185] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [230.029401] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [230.029640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [230.029798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [230.029978] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [230.030146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [230.030351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [230.030554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [230.030754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [230.030914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [230.031125] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<6> [230.032197] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<6> [230.032269] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled

<7> [230.032272] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0

<7> [230.032654] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [230.032842] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [230.032995] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [230.033144] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [230.033312] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [230.033461] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [230.033609] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [230.033756] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [230.033903] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [230.034050] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [230.035232] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [230.036718] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [230.037079] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [230.037306] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [230.037800] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C]

<7> [230.037949] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [230.038164] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] Using AUX CH D (VBT)

<7> [230.038337] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D]

<7> [230.038687] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [230.038871] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D]

<7> [230.039016] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [230.039278] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] Using AUX CH A (VBT)

<7> [230.039435] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E]

<7> [230.039646] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [230.040061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [230.040278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [230.040483] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [230.040642] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [230.040835] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [230.040993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [230.041151] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [230.041319] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [230.041475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [230.041631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [230.041812] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [230.041969] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [230.042160] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [230.042358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [230.042517] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [230.042691] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A

<7> [230.042854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B

<7> [230.043006] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C

<7> [230.043162] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [230.043335] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [230.043498] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [230.043658] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [230.043838] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [230.044068] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [230.044273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled

<7> [230.044437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled

<7> [230.044633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled

<7> [230.044795] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled

<7> [230.044947] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [230.045097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [230.045260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [230.045410] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [230.045595] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [230.045750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [230.045934] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [230.046113] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [230.046285] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [230.046462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [230.046626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [230.046777] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [230.046974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [230.047132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [230.047316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [230.047473] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [230.047653] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [230.047831] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [230.048009] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [230.050244] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K)

<7> [230.050451] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [230.050577] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [230.050712] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [230.050859] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [230.051879] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [230.052055] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [230.052204] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0

<7> [230.055052] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [230.055248] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [230.055424] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [230.076558] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f

<7> [230.076737] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [230.076888] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [230.077036] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [230.077185] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2

<7> [230.077343] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006

<7> [230.077492] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [230.077640] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [230.077788] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [230.077935] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [230.078083] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [230.078262] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [230.078434] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [230.078613] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [230.078763] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [230.080007] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [230.080011] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [230.084335] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [230.084787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [230.084962] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [230.084965] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [230.094261] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [230.094888] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [230.095050] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [230.095218] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [230.095376] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [230.095552] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [230.096031] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [230.096163] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [230.096298] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [230.096423] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [230.098609] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [230.098922] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event

<7> [230.099201] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1

<7> [230.099853] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event

<7> [230.100232] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event

<7> [230.100608] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2

<7> [230.101280] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event

<6> [230.101333] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [230.103031] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [230.117730] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [230.118480] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input73

<7> [230.119102] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [230.119605] [drm:drm_client_modeset_probe]

<7> [230.119583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [230.119680] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [230.119690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [230.119909] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [230.119926] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [230.119819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [230.119934] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]

<7> [230.119942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [230.120151] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] status updated from unknown to disconnected

<7> [230.120050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [230.120164] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [230.120170] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]

<7> [230.120177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [230.120292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [230.120500] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] status updated from unknown to disconnected

<7> [230.120514] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected

<7> [230.120528] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]

<7> [230.120535] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [230.120792] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected

<7> [230.120808] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [230.120821] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]

<7> [230.120828] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [230.120902] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [230.121085] i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9

<7> [230.121090] i915 device info: graphics version: 9

<7> [230.121093] i915 device info: media version: 9

<7> [230.121095] i915 device info: graphics stepping: G0

<7> [230.121098] i915 device info: media stepping: G0

<7> [230.121097] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] status updated from unknown to disconnected

<7> [230.121101] i915 device info: display stepping: G0

<7> [230.121103] i915 device info: base die stepping: **

<7> [230.121104] i915 device info: gt: 2

<7> [230.121107] i915 device info: memory-regions: 0x21

<7> [230.121110] i915 device info: page-sizes: 0x11000

<7> [230.121113] i915 device info: platform: SKYLAKE

<7> [230.121115] i915 device info: ppgtt-size: 48

<7> [230.121116] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected

<7> [230.121118] i915 device info: ppgtt-type: 2

<7> [230.121120] i915 device info: dma_mask_size: 39

<7> [230.121121] i915 device info: is_mobile: no

<7> [230.121123] i915 device info: is_lp: no

<7> [230.121126] i915 device info: require_force_probe: no

<7> [230.121128] i915 device info: is_dgfx: no

<7> [230.121131] i915 device info: has_64bit_reloc: yes

<7> [230.121131] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [230.121135] i915 device info: has_64k_pages: no

<7> [230.121135] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [230.121138] i915 device info: gpu_reset_clobbers_display: no

<7> [230.121139] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [230.121142] i915 device info: has_reset_engine: yes

<7> [230.121143] i915 device info: has_3d_pipeline: yes

<7> [230.121145] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [230.121146] i915 device info: has_4tile: no

<7> [230.121149] i915 device info: has_flat_ccs: no

<7> [230.121149] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [230.121152] i915 device info: has_global_mocs: no

<7> [230.121152] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [230.121156] i915 device info: has_gmd_id: no

<7> [230.121158] i915 device info: has_gt_uc: yes

<7> [230.121160] i915 device info: has_heci_pxp: no

<7> [230.121161] i915 device info: has_heci_gscfi: no

<7> [230.121163] i915 device info: has_guc_deprivilege: no

<7> [230.121164] i915 device info: has_l3_ccs_read: no

<7> [230.121166] i915 device info: has_l3_dpf: no

<7> [230.121167] i915 device info: has_llc: yes

<7> [230.121169] i915 device info: has_logical_ring_contexts: yes

<7> [230.121170] i915 device info: has_logical_ring_elsq: no

<7> [230.121171] i915 device info: has_media_ratio_mode: no

<7> [230.121172] i915 device info: has_mslice_steering: no

<7> [230.121173] i915 device info: has_oa_bpc_reporting: no

<7> [230.121175] i915 device info: has_oa_slice_contrib_limits: no

<7> [230.121176] i915 device info: has_oam: no

<7> [230.121178] i915 device info: has_one_eu_per_fuse_bit: no

<7> [230.121179] i915 device info: has_pxp: no

<7> [230.121180] i915 device info: has_rc6: yes

<7> [230.121182] i915 device info: has_rc6p: no

<7> [230.121183] i915 device info: has_rps: yes

<7> [230.121185] i915 device info: has_runtime_pm: yes

<7> [230.121186] i915 device info: has_snoop: no

<7> [230.121188] i915 device info: has_coherent_ggtt: yes

<7> [230.121189] i915 device info: tuning_thread_rr_after_dep: no

<7> [230.121190] i915 device info: unfenced_needs_alignment: no

<7> [230.121192] i915 device info: hws_needs_physical: no

<7> [230.121193] i915 device info: has_pooled_eu: no

<7> [230.121195] i915 device info: rawclk rate: 24000 kHz

<7> [230.121197] i915 device info: display version: 9

<7> [230.121201] i915 device info: cursor_needs_physical: no

<7> [230.121203] i915 device info: has_cdclk_crawl: no

<7> [230.121206] i915 device info: has_cdclk_squash: no

<7> [230.121209] i915 device info: has_ddi: yes

<7> [230.121210] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [230.121231] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [230.121252] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [230.121270] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [230.121625] i915 device info: has_dp_mst: yes

<7> [230.121627] i915 device info: has_dsb: no

<7> [230.121629] i915 device info: has_fpga_dbg: yes

<7> [230.121630] i915 device info: has_gmch: no

<7> [230.121631] i915 device info: has_hotplug: yes

<7> [230.121633] i915 device info: has_hti: no

<7> [230.121634] i915 device info: has_ipc: yes

<7> [230.121636] i915 device info: has_overlay: no

<7> [230.121637] i915 device info: has_psr: yes

<7> [230.121639] i915 device info: has_psr_hw_tracking: yes

<7> [230.121640] i915 device info: overlay_needs_physical: no

<7> [230.121642] i915 device info: supports_tv: no

<7> [230.121643] i915 device info: has_hdcp: yes

<7> [230.121645] i915 device info: has_dmc: yes

<7> [230.121646] i915 device info: has_dsc: no

<7> [230.121648] i915 device info: iommu: enabled

<7> [230.121649] i915 device info: available engines: 40403

<7> [230.121651] i915 device info: slice total: 1, mask=0001

<7> [230.121653] i915 device info: subslice total: 3

<7> [230.121654] i915 device info: slice0: 3 subslices, mask=00000007

<7> [230.121656] i915 device info: slice1: 0 subslices, mask=00000000

<7> [230.121658] i915 device info: slice2: 0 subslices, mask=00000000

<7> [230.121660] i915 device info: EU total: 24

<7> [230.121661] i915 device info: EU per subslice: 8

<7> [230.121663] i915 device info: has slice power gating: no

<7> [230.121664] i915 device info: has subslice power gating: no

<7> [230.121666] i915 device info: has EU power gating: yes

<6> [230.121667] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [230.121669] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [230.121671] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [230.121673] i915: Performing live selftests with st_random_seed=0x85fbdbc0 st_timeout=500

<6> [230.121685] i915: Running i915_active_live_selftests/live_active_wait

<7> [230.121978] [drm:drm_client_modeset_probe]

<7> [230.122027] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [230.122035] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [230.122262] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [230.122270] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]

<7> [230.122277] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [230.122487] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [230.122494] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]

<7> [230.122501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [230.122710] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected

<7> [230.122718] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]

<7> [230.122725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [230.122998] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [230.123006] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]

<7> [230.123013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [230.123269] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected

<7> [230.123277] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [230.123282] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [230.123287] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [230.123292] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [230.123296] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [230.123301] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [230.123364] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [230.123375] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [230.123394] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [230.123406] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [230.123472] [drm:drm_client_modeset_probe]

<7> [230.123516] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [230.123524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [230.123736] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [230.123744] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]

<7> [230.123751] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [230.123959] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [230.123966] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]

<7> [230.123973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [230.124184] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected

<7> [230.124191] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]

<7> [230.124198] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [230.124427] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [230.124434] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]

<7> [230.124441] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [230.124653] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected

<7> [230.124660] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [230.124665] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [230.124669] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [230.124674] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [230.124679] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [230.124684] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [230.124715] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [230.124726] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [230.124745] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [230.124756] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [230.125912] i915: Running i915_active_live_selftests/live_active_retire

<6> [230.127098] i915: Running i915_active_live_selftests/live_active_barrier

<7> [230.127957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [230.128133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [230.128313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [230.128474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [230.155483] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [230.202825] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [230.257627] i915: probe of 0000:00:02.0 failed with error -25

<6> [230.452157] [IGT] i915_selftest: finished subtest active, SUCCESS

Results for igt@i915_selftest@live@active