igt@i915_selftest@live@gt_pm on fi-cfl-guc@linus-v6.6-rc1 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g605d12880 (x86_64) (Linux: 6.6.0-rc1-linus-v6.6-rc1-g0bb80ecc33a8+ x86_64)
Out	Starting dynamic subtest: gt_pm Dynamic subtest gt_pm: SUCCESS (3.020s)
Err	Starting dynamic subtest: gt_pm Dynamic subtest gt_pm: SUCCESS (3.020s)
Dmesg	<6> [212.546661] [IGT] i915_selftest: starting dynamic subtest gt_pm <5> [212.632488] Setting dangerous option enable_guc - tainting kernel <5> [212.632494] Setting dangerous option live_selftests - tainting kernel <7> [212.662456] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [212.662651] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [212.662800] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [212.662809] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP) <7> [212.662946] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [212.663127] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [212.663250] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [212.663859] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [212.663978] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [212.664090] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [212.664241] i915 0000:00:02.0: vgaarb: deactivate vga console <7> [212.664391] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047 <7> [212.664576] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [212.664869] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8c90a018 <7> [212.665022] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [212.665150] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [212.665280] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [212.665406] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [212.668916] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [212.669120] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [212.669249] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [212.669391] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [212.669589] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [212.669687] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [212.669784] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [212.669877] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [212.669970] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [212.670062] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [212.670151] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [212.670243] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [212.670334] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [212.670422] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [212.671153] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [212.671340] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209 <7> [212.671529] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [212.671756] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [212.671918] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [212.672060] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [212.672205] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [212.672346] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [212.672515] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [212.672673] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [212.672815] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [212.672960] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [212.673115] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [212.673252] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [212.673389] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [212.673575] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [212.673756] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [212.673898] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [212.674038] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [212.674181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [212.674343] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [212.674496] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [212.674686] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [212.674825] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9 <7> [212.674961] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [212.675128] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 10 <7> [212.675290] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [212.675441] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 10 <7> [212.675624] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [212.675760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [212.675901] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [212.676050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [212.676219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [212.676371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [212.676559] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [212.676739] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [212.676894] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [212.677038] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [212.677220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.677358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.677549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [212.677735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.677904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [212.678042] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [212.678182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [212.678358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [212.678586] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [212.679509] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [212.679858] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [212.680218] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [212.680388] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [212.680581] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [212.680800] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [212.680930] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [212.681062] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [212.681191] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [212.681323] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [212.681455] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [212.681637] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [212.682871] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [212.684245] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [212.684560] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [212.684789] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [212.687609] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [212.687778] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [212.687917] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [212.688055] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [212.688199] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [212.688339] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [212.688516] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [212.688724] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [212.688864] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [212.689002] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [212.689140] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [212.689326] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [212.689550] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [212.689695] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [212.689820] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [212.689979] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [212.690102] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [212.690272] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [212.690566] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [212.690736] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [212.690910] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [212.691043] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [212.691202] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [212.691333] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [212.910475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [212.921475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [212.932475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [212.943477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [212.954476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [212.965476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [212.976475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [212.987477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [212.998475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.009475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.020476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.031477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.042475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.053477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.064475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.075478] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.086476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.097476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.108477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.119478] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.130475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.141475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.152475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.163477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.174475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.185476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.196476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.207477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.218476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.229476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.240475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.251477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [213.251655] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [213.251667] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [213.251709] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [213.251877] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [213.252064] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [213.252197] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [213.252518] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [213.252647] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [213.252839] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI D/PHY D] Using AUX CH D (VBT) <7> [213.253015] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI D/PHY D] <7> [213.253288] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [213.253425] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D/PHY D] <7> [213.253619] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:108:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [213.253823] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:119:DDI E/PHY E] Using AUX CH A (VBT) <7> [213.253956] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:119:DDI E/PHY E] <7> [213.254134] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [213.254505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [213.254733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [213.254883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [213.255018] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [213.255155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [213.255291] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [213.255428] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [213.255649] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [213.255803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [213.255991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [213.256128] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [213.256269] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [213.256408] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [213.256611] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [213.256804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D/PHY D] hw state readout: disabled, pipe A <7> [213.256988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST A] hw state readout: disabled, pipe A <7> [213.257151] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST B] hw state readout: disabled, pipe B <7> [213.257280] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST C] hw state readout: disabled, pipe C <7> [213.257415] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DDI E/PHY E] hw state readout: disabled, pipe A <7> [213.257634] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [213.257794] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [213.257931] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [213.258070] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [213.258238] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [213.258431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [213.258671] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [213.258828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:HDMI-A-3] hw state readout: disabled <7> [213.258965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:120:DP-2] hw state readout: disabled <7> [213.259097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [213.259227] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [213.259357] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [213.259521] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [213.259745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [213.259951] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [213.260085] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [213.260219] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [213.260359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [213.260559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [213.260749] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [213.260948] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [213.261135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [213.261270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [213.261405] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [213.261619] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [213.261778] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [213.261909] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [213.262041] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [213.264439] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [213.264633] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [213.264740] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [213.264851] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [213.264977] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7> [213.265996] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [213.266125] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [213.266249] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [213.270518] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [213.270705] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [213.270943] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [213.293282] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [213.293431] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [213.293628] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [213.293820] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [213.293951] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [213.294084] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x3e920000 <7> [213.294259] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [213.294459] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [213.294664] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [213.294814] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [213.294943] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [213.295073] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [213.295202] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [213.295330] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [213.295458] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [213.296679] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [213.296683] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [213.303598] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [213.304228] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [213.304386] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [213.304388] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [213.311417] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [213.311986] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [213.312131] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [213.312272] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [213.312413] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [213.312579] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [213.313009] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [213.313128] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [213.313241] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [213.313354] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [213.315399] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [213.315708] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [213.315990] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 <7> [213.316538] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <7> [213.316853] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:HDMI-A-3] generating connector hotplug event <7> [213.317096] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 <7> [213.317595] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:120:DP-2] generating connector hotplug event <6> [213.317632] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [213.318961] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [213.331303] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [213.333042] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input66 <7> [213.333597] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [213.334013] [drm:drm_client_modeset_probe] <7> [213.334061] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [213.334011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [213.334070] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [213.334275] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [213.334289] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [213.334296] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [213.334249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [213.334303] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [213.334543] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [213.334568] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [213.334574] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [213.334480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [213.334581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [213.334808] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [213.334819] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [213.334825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] <7> [213.334737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [213.334831] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [213.335028] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] status updated from unknown to disconnected <7> [213.335039] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected <7> [213.335045] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] <7> [213.335052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [213.335248] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] status updated from unknown to disconnected <7> [213.335259] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected <7> [213.335265] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [213.335269] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [213.335274] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [213.335278] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [213.335282] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [213.335285] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [213.335318] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [213.335328] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [213.335348] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [213.335358] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [213.335373] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [213.335630] i915 device info: pciid=0x3e92 rev=0x00 platform=COFFEELAKE (subplatform=0x0) gen=9 <7> [213.335635] i915 device info: graphics version: 9 <7> [213.335637] i915 device info: media version: 9 <7> [213.335640] i915 device info: graphics stepping: <7> [213.335643] i915 device info: media stepping: <7> [213.335645] i915 device info: display stepping: <7> [213.335647] i915 device info: base die stepping: <7> [213.335650] i915 device info: gt: 2 <7> [213.335652] i915 device info: memory-regions: 0x21 <7> [213.335655] i915 device info: page-sizes: 0x11000 <7> [213.335657] i915 device info: platform: COFFEELAKE <7> [213.335660] i915 device info: ppgtt-size: 48 <7> [213.335662] i915 device info: ppgtt-type: 2 <7> [213.335665] i915 device info: dma_mask_size: 39 <7> [213.335667] i915 device info: is_mobile: no <7> [213.335670] i915 device info: is_lp: no <7> [213.335672] i915 device info: require_force_probe: no <7> [213.335675] i915 device info: is_dgfx: no <7> [213.335677] i915 device info: has_64bit_reloc: yes <7> [213.335680] i915 device info: has_64k_pages: no <7> [213.335682] i915 device info: gpu_reset_clobbers_display: no <7> [213.335685] i915 device info: has_reset_engine: yes <7> [213.335687] i915 device info: has_3d_pipeline: yes <7> [213.335690] i915 device info: has_4tile: no <7> [213.335692] i915 device info: has_flat_ccs: no <7> [213.335694] i915 device info: has_global_mocs: no <7> [213.335696] i915 device info: has_gmd_id: no <7> [213.335699] i915 device info: has_gt_uc: yes <7> [213.335701] i915 device info: has_heci_pxp: no <7> [213.335703] i915 device info: has_heci_gscfi: no <7> [213.335706] i915 device info: has_guc_deprivilege: no <7> [213.335708] i915 device info: has_l3_ccs_read: no <7> [213.335710] i915 device info: has_l3_dpf: no <7> [213.335713] i915 device info: has_llc: yes <7> [213.335715] i915 device info: has_logical_ring_contexts: yes <7> [213.335717] i915 device info: has_logical_ring_elsq: no <7> [213.335720] i915 device info: has_media_ratio_mode: no <7> [213.335722] i915 device info: has_mslice_steering: no <7> [213.335724] i915 device info: has_oa_bpc_reporting: no <7> [213.335727] i915 device info: has_oa_slice_contrib_limits: no <7> [213.335729] i915 device info: has_oam: no <7> [213.335731] i915 device info: has_one_eu_per_fuse_bit: no <7> [213.335733] i915 device info: has_pxp: no <7> [213.335735] i915 device info: has_rc6: yes <7> [213.335737] i915 device info: has_rc6p: no <7> [213.335740] i915 device info: has_rps: yes <7> [213.335742] i915 device info: has_runtime_pm: yes <7> [213.335744] i915 device info: has_snoop: no <7> [213.335747] i915 device info: has_coherent_ggtt: yes <7> [213.335749] i915 device info: tuning_thread_rr_after_dep: no <7> [213.335751] i915 device info: unfenced_needs_alignment: no <7> [213.335754] i915 device info: hws_needs_physical: no <7> [213.335756] i915 device info: has_pooled_eu: no <7> [213.335759] i915 device info: rawclk rate: 24000 kHz <7> [213.335761] i915 device info: display version: 9 <7> [213.335764] i915 device info: cursor_needs_physical: no <7> [213.335766] i915 device info: has_cdclk_crawl: no <7> [213.335768] i915 device info: has_cdclk_squash: no <7> [213.335770] i915 device info: has_ddi: yes <7> [213.335772] i915 device info: has_dp_mst: yes <7> [213.335774] i915 device info: has_dsb: no <7> [213.335776] i915 device info: has_fpga_dbg: yes <7> [213.335778] i915 device info: has_gmch: no <7> [213.335780] i915 device info: has_hotplug: yes <7> [213.335782] i915 device info: has_hti: no <7> [213.335784] i915 device info: has_ipc: yes <7> [213.335787] i915 device info: has_overlay: no <7> [213.335789] i915 device info: has_psr: yes <7> [213.335805] i915 device info: has_psr_hw_tracking: yes <7> [213.335808] i915 device info: overlay_needs_physical: no <7> [213.335810] i915 device info: supports_tv: no <7> [213.335812] i915 device info: has_hdcp: yes <7> [213.335815] i915 device info: has_dmc: yes <7> [213.335817] i915 device info: has_dsc: no <7> [213.335819] i915 device info: iommu: disabled <7> [213.335822] i915 device info: available engines: 40403 <7> [213.335824] i915 device info: slice total: 1, mask=0001 <7> [213.335827] i915 device info: subslice total: 3 <7> [213.335830] i915 device info: slice0: 3 subslices, mask=00000007 <7> [213.335832] i915 device info: slice1: 0 subslices, mask=00000000 <7> [213.335835] i915 device info: slice2: 0 subslices, mask=00000000 <7> [213.335837] i915 device info: EU total: 24 <7> [213.335840] i915 device info: EU per subslice: 8 <7> [213.335842] i915 device info: has slice power gating: no <7> [213.335844] i915 device info: has subslice power gating: no <7> [213.335846] i915 device info: has EU power gating: yes <6> [213.335849] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [213.335852] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [213.335854] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [213.335859] i915: Performing live selftests with st_random_seed=0x2f067e7 st_timeout=500 <6> [213.335862] i915: Running gt_pm <6> [213.335881] i915: Running intel_gt_pm_live_selftests/live_gt_clocks <7> [213.336178] [drm:drm_client_modeset_probe] <7> [213.336210] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [213.336216] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [213.336387] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [213.336392] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] <7> [213.336397] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [213.336618] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected <7> [213.336623] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] <7> [213.336628] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [213.336798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected <7> [213.336803] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] <7> [213.336807] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [213.336976] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected <7> [213.336981] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] <7> [213.336985] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [213.337150] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected <7> [213.337155] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [213.337158] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [213.337161] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [213.337164] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [213.337167] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [213.337170] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [213.337197] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [213.337205] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [213.337231] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [213.337239] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [213.341236] rcs0: TIMESTAMP 12024 cycles [1002000ns] in 1002046ns [12025 cycles], using CS clock frequency of 12000KHz <6> [213.346283] bcs0: TIMESTAMP 12022 cycles [1001834ns] in 1002009ns [12025 cycles], using CS clock frequency of 12000KHz <6> [213.351325] vcs0: TIMESTAMP 12022 cycles [1001834ns] in 1002001ns [12025 cycles], using CS clock frequency of 12000KHz <6> [213.356363] vecs0: TIMESTAMP 12021 cycles [1001750ns] in 1001816ns [12022 cycles], using CS clock frequency of 12000KHz <6> [213.357442] i915: Running intel_gt_pm_live_selftests/live_rc6_manual <7> [213.459929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.563646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.564548] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.565376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.566769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <6> [213.723603] GPU consumed 609768uW in RC0 and 0uW in RC6 <6> [213.723965] i915: Running intel_gt_pm_live_selftests/live_rps_clock_interval <7> [213.724593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.725537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.726980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <6> [213.744370] rcs0: rps counted 752 C0 cycles [1002667ns] in 1003446ns [753 cycles], using GT clock frequency of 12000KHz <6> [213.765749] i915: Running intel_gt_pm_live_selftests/live_rps_control <6> [213.775576] rcs0: range:[15:350MHz, 48:1200MHz] limit:[48:1200MHz], 15:48 response 33360ns:108146ns <6> [213.781009] bcs0: range:[15:350MHz, 48:1200MHz] limit:[48:1200MHz], 15:48 response 31145ns:88598ns <6> [213.787439] vcs0: range:[15:350MHz, 48:1200MHz] limit:[48:1200MHz], 15:48 response 31527ns:91777ns <6> [213.795278] vecs0: range:[15:350MHz, 48:1200MHz] limit:[48:1200MHz], 15:48 response 31943ns:91747ns <6> [213.804784] i915: Running intel_gt_pm_live_selftests/live_rps_frequency_cs <6> [213.849475] rcs0: min:38252KHz @ 350MHz, max:127765KHz @ 1200MHz [97%] <6> [213.890474] bcs0: min:38220KHz @ 350MHz, max:127771KHz @ 1200MHz [98%] <6> [213.930474] vcs0: min:38204KHz @ 350MHz, max:127596KHz @ 1200MHz [97%] <6> [213.970475] vecs0: min:38273KHz @ 350MHz, max:127771KHz @ 1200MHz [97%] <6> [213.977641] i915: Running intel_gt_pm_live_selftests/live_rps_frequency_srm <6> [214.017475] rcs0: min:5011KHz @ 350MHz, max:13813KHz @ 1200MHz [80%] <6> [214.058475] bcs0: min:6034KHz @ 350MHz, max:14814KHz @ 1200MHz [72%] <6> [214.098476] vcs0: min:6034KHz @ 350MHz, max:14814KHz @ 1200MHz [72%] <6> [214.138475] vecs0: min:6034KHz @ 350MHz, max:14814KHz @ 1200MHz [72%] <6> [214.145653] i915: Running intel_gt_pm_live_selftests/live_rps_power <6> [214.245589] rcs0: min:802mW @ 3083MHz, max:6694mW @ 10600MHz <6> [214.343606] bcs0: min:668mW @ 3083MHz, max:5481mW @ 10600MHz <6> [214.441611] vcs0: min:719mW @ 3083MHz, max:5725mW @ 10600MHz <6> [214.539605] vecs0: min:686mW @ 3083MHz, max:5546mW @ 10600MHz <6> [214.551706] i915: Running intel_gt_pm_live_selftests/live_rps_interrupt <6> [214.551765] i915: Running intel_gt_pm_live_selftests/live_rps_dynamic <6> [214.551834] RPS has timer support <6> [214.595581] rcs0: dynamically reclocked to 72:1200MHz while busy in 19642957ns, and 21:350MHz while idle in 20006269ns <6> [214.636583] bcs0: dynamically reclocked to 72:1200MHz while busy in 19461480ns, and 21:350MHz while idle in 20009619ns <6> [214.677922] vcs0: dynamically reclocked to 72:1200MHz while busy in 19713842ns, and 21:350MHz while idle in 20334549ns <6> [214.718580] vecs0: dynamically reclocked to 72:1200MHz while busy in 19467832ns, and 21:350MHz while idle in 19977044ns <6> [214.730766] i915: Running intel_gt_pm_live_selftests/live_gt_resume <6> [214.732059] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.732086] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.739630] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.740793] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.741702] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.741713] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.744777] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.744795] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.750629] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.751787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.752671] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.752682] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.758691] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.758711] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.765625] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.766903] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.768123] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.768141] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.773586] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.773607] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.780551] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 3ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.781782] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.783001] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.783020] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.787711] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.787738] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.794626] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.795902] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.797107] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.797125] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.801996] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.802023] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.809640] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.810779] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.811691] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.811702] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.815814] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.815842] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.823644] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.824799] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.825650] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.825663] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.828950] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.828969] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.836621] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.837816] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.838725] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.838737] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.842236] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.842255] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.850614] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.851870] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.853077] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.853096] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.857452] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.857545] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.863617] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.864760] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.865651] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.865663] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.869300] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.869318] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.876608] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.877853] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.879039] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.879059] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.883659] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.883686] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.891602] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.892388] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.892996] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.893004] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.895510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.895523] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.900536] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.901375] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.902006] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.902019] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.905315] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.905334] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.912605] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.913390] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.914012] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.914024] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.917427] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.917444] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.924747] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.925612] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.926401] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.926414] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.929429] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.929443] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.936597] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.937388] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.938002] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.938010] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.940430] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.940443] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.945599] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.946391] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.947009] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.947017] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.949365] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.949378] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.954558] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.955396] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.956004] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.956012] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.958464] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.958507] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.963606] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.964443] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.965054] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.965061] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.967379] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.967393] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.972532] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.973370] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.973987] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.973994] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.976285] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.976298] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.981570] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.982408] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.983023] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.983031] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.985281] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.985293] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.990606] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [214.991397] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [214.992019] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [214.992027] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [214.994306] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [214.994319] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [214.999605] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.000438] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.001051] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.001059] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.003568] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.003581] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.010586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.011376] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.011989] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.011997] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.014264] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.014277] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.019374] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.020250] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.020872] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.020880] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.023303] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.023321] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.028579] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.029371] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.029984] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.029992] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.032296] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.032309] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.037350] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.038214] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.038832] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.038841] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.041118] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.041131] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.047600] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.048389] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.049007] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.049014] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.051668] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.051682] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.058570] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.059360] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.060050] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.060058] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.062427] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.062441] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.067586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.068533] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.069092] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.069100] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.071623] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.071638] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.078606] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.079393] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.080004] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.080011] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.082449] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.082462] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.087570] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.088364] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.088973] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.088981] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.091279] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.091292] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.096380] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.097203] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.097809] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.097817] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.100159] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.100171] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.106608] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.107403] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.108012] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.108020] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.110433] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.110446] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.115517] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.116307] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.116926] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.116934] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.119287] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.119299] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.124364] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.125217] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.125830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.125838] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.128120] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.128133] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.134576] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.135365] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.135979] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.135987] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.138216] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.138228] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.143522] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.144354] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.144964] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.144972] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.147278] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.147290] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.152350] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.153168] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.153777] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.153785] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.156250] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.156263] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.161361] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.162230] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.162845] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.162852] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.165088] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.165100] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.170329] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.171199] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.171817] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.171825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.174130] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.174143] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.179574] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.180364] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.180972] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.180980] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.183278] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.183291] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.190595] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.191427] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.192047] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.192055] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.194411] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.194423] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.199524] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.200363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.200977] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.200984] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.203249] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.203261] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.210598] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.211432] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.212043] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.212052] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.214293] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.214307] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.219451] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.220315] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.220922] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.220929] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.223430] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.223443] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.228528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.229311] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.229926] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.229933] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [215.232388] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [215.232402] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [215.237540] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [215.238323] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [215.238961] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [215.238973] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [215.241156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.242283] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [215.242981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [215.243769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [215.244556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [215.271932] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [215.345685] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [215.400801] i915: probe of 0000:00:02.0 failed with error -25 <6> [215.567409] [IGT] i915_selftest: finished subtest gt_pm, SUCCESS

<6> [212.546661] [IGT] i915_selftest: starting dynamic subtest gt_pm

<5> [212.632488] Setting dangerous option enable_guc - tainting kernel

<5> [212.632494] Setting dangerous option live_selftests - tainting kernel

<7> [212.662456] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [212.662651] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [212.662800] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [212.662809] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP)

<7> [212.662946] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [212.663127] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [212.663250] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [212.663859] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [212.663978] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [212.664090] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [212.664241] i915 0000:00:02.0: vgaarb: deactivate vga console

<7> [212.664391] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047

<7> [212.664576] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [212.664869] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8c90a018

<7> [212.665022] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [212.665150] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [212.665280] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [212.665406] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [212.668916] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [212.669120] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [212.669249] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [212.669391] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [212.669589] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [212.669687] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [212.669784] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [212.669877] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [212.669970] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [212.670062] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [212.670151] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [212.670243] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [212.670334] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [212.670422] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [212.671153] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [212.671340] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209

<7> [212.671529] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [212.671756] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [212.671918] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [212.672060] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [212.672205] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [212.672346] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [212.672515] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [212.672673] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [212.672815] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [212.672960] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [212.673115] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [212.673252] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [212.673389] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [212.673575] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [212.673756] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [212.673898] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [212.674038] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [212.674181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [212.674343] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [212.674496] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [212.674686] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [212.674825] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9

<7> [212.674961] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [212.675128] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 10

<7> [212.675290] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [212.675441] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 10

<7> [212.675624] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [212.675760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [212.675901] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [212.676050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [212.676219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [212.676371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [212.676559] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [212.676739] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [212.676894] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [212.677038] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [212.677220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.677358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.677549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [212.677735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.677904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [212.678042] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [212.678182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [212.678358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [212.678586] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [212.679509] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [212.679858] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [212.680218] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [212.680388] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [212.680581] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [212.680800] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [212.680930] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [212.681062] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [212.681191] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [212.681323] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [212.681455] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [212.681637] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [212.682871] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [212.684245] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [212.684560] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [212.684789] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [212.687609] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [212.687778] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [212.687917] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [212.688055] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [212.688199] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [212.688339] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [212.688516] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [212.688724] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [212.688864] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [212.689002] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [212.689140] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [212.689326] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [212.689550] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [212.689695] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [212.689820] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [212.689979] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [212.690102] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [212.690272] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [212.690566] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [212.690736] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [212.690910] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [212.691043] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [212.691202] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [212.691333] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [212.910475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [212.921475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [212.932475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [212.943477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [212.954476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [212.965476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [212.976475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [212.987477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [212.998475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.009475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.020476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.031477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.042475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.053477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.064475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.075478] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.086476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.097476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.108477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.119478] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.130475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.141475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.152475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.163477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.174475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.185476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.196476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.207477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.218476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.229476] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.240475] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.251477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [213.251655] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [213.251667] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [213.251709] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [213.251877] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [213.252064] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [213.252197] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [213.252518] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [213.252647] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [213.252839] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI D/PHY D] Using AUX CH D (VBT)

<7> [213.253015] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI D/PHY D]

<7> [213.253288] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [213.253425] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D/PHY D]

<7> [213.253619] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:108:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [213.253823] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:119:DDI E/PHY E] Using AUX CH A (VBT)

<7> [213.253956] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:119:DDI E/PHY E]

<7> [213.254134] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [213.254505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [213.254733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [213.254883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [213.255018] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [213.255155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [213.255291] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [213.255428] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [213.255649] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [213.255803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [213.255991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [213.256128] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [213.256269] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [213.256408] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [213.256611] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [213.256804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [213.256988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST A] hw state readout: disabled, pipe A

<7> [213.257151] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST B] hw state readout: disabled, pipe B

<7> [213.257280] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST C] hw state readout: disabled, pipe C

<7> [213.257415] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [213.257634] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [213.257794] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [213.257931] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [213.258070] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [213.258238] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [213.258431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [213.258671] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [213.258828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:HDMI-A-3] hw state readout: disabled

<7> [213.258965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:120:DP-2] hw state readout: disabled

<7> [213.259097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [213.259227] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [213.259357] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [213.259521] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [213.259745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [213.259951] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [213.260085] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [213.260219] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [213.260359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [213.260559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [213.260749] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [213.260948] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [213.261135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [213.261270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [213.261405] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [213.261619] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [213.261778] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [213.261909] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [213.262041] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [213.264439] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [213.264633] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [213.264740] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [213.264851] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [213.264977] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global

<7> [213.265996] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [213.266125] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [213.266249] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [213.270518] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [213.270705] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [213.270943] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [213.293282] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [213.293431] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [213.293628] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [213.293820] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [213.293951] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [213.294084] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x3e920000

<7> [213.294259] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [213.294459] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [213.294664] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [213.294814] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [213.294943] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [213.295073] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [213.295202] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [213.295330] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [213.295458] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [213.296679] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [213.296683] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [213.303598] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [213.304228] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [213.304386] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [213.304388] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [213.311417] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [213.311986] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [213.312131] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [213.312272] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [213.312413] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [213.312579] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [213.313009] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [213.313128] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [213.313241] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [213.313354] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [213.315399] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [213.315708] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [213.315990] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1

<7> [213.316538] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<7> [213.316853] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:HDMI-A-3] generating connector hotplug event

<7> [213.317096] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2

<7> [213.317595] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:120:DP-2] generating connector hotplug event

<6> [213.317632] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [213.318961] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [213.331303] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [213.333042] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input66

<7> [213.333597] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [213.334013] [drm:drm_client_modeset_probe]

<7> [213.334061] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [213.334011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [213.334070] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [213.334275] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [213.334289] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [213.334296] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [213.334249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [213.334303] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [213.334543] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [213.334568] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [213.334574] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [213.334480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [213.334581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [213.334808] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [213.334819] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [213.334825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3]

<7> [213.334737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [213.334831] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [213.335028] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] status updated from unknown to disconnected

<7> [213.335039] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [213.335045] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2]

<7> [213.335052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [213.335248] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] status updated from unknown to disconnected

<7> [213.335259] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected

<7> [213.335265] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [213.335269] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [213.335274] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [213.335278] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [213.335282] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [213.335285] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [213.335318] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [213.335328] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [213.335348] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [213.335358] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [213.335373] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [213.335630] i915 device info: pciid=0x3e92 rev=0x00 platform=COFFEELAKE (subplatform=0x0) gen=9

<7> [213.335635] i915 device info: graphics version: 9

<7> [213.335637] i915 device info: media version: 9

<7> [213.335640] i915 device info: graphics stepping: **

<7> [213.335643] i915 device info: media stepping: **

<7> [213.335645] i915 device info: display stepping: **

<7> [213.335647] i915 device info: base die stepping: **

<7> [213.335650] i915 device info: gt: 2

<7> [213.335652] i915 device info: memory-regions: 0x21

<7> [213.335655] i915 device info: page-sizes: 0x11000

<7> [213.335657] i915 device info: platform: COFFEELAKE

<7> [213.335660] i915 device info: ppgtt-size: 48

<7> [213.335662] i915 device info: ppgtt-type: 2

<7> [213.335665] i915 device info: dma_mask_size: 39

<7> [213.335667] i915 device info: is_mobile: no

<7> [213.335670] i915 device info: is_lp: no

<7> [213.335672] i915 device info: require_force_probe: no

<7> [213.335675] i915 device info: is_dgfx: no

<7> [213.335677] i915 device info: has_64bit_reloc: yes

<7> [213.335680] i915 device info: has_64k_pages: no

<7> [213.335682] i915 device info: gpu_reset_clobbers_display: no

<7> [213.335685] i915 device info: has_reset_engine: yes

<7> [213.335687] i915 device info: has_3d_pipeline: yes

<7> [213.335690] i915 device info: has_4tile: no

<7> [213.335692] i915 device info: has_flat_ccs: no

<7> [213.335694] i915 device info: has_global_mocs: no

<7> [213.335696] i915 device info: has_gmd_id: no

<7> [213.335699] i915 device info: has_gt_uc: yes

<7> [213.335701] i915 device info: has_heci_pxp: no

<7> [213.335703] i915 device info: has_heci_gscfi: no

<7> [213.335706] i915 device info: has_guc_deprivilege: no

<7> [213.335708] i915 device info: has_l3_ccs_read: no

<7> [213.335710] i915 device info: has_l3_dpf: no

<7> [213.335713] i915 device info: has_llc: yes

<7> [213.335715] i915 device info: has_logical_ring_contexts: yes

<7> [213.335717] i915 device info: has_logical_ring_elsq: no

<7> [213.335720] i915 device info: has_media_ratio_mode: no

<7> [213.335722] i915 device info: has_mslice_steering: no

<7> [213.335724] i915 device info: has_oa_bpc_reporting: no

<7> [213.335727] i915 device info: has_oa_slice_contrib_limits: no

<7> [213.335729] i915 device info: has_oam: no

<7> [213.335731] i915 device info: has_one_eu_per_fuse_bit: no

<7> [213.335733] i915 device info: has_pxp: no

<7> [213.335735] i915 device info: has_rc6: yes

<7> [213.335737] i915 device info: has_rc6p: no

<7> [213.335740] i915 device info: has_rps: yes

<7> [213.335742] i915 device info: has_runtime_pm: yes

<7> [213.335744] i915 device info: has_snoop: no

<7> [213.335747] i915 device info: has_coherent_ggtt: yes

<7> [213.335749] i915 device info: tuning_thread_rr_after_dep: no

<7> [213.335751] i915 device info: unfenced_needs_alignment: no

<7> [213.335754] i915 device info: hws_needs_physical: no

<7> [213.335756] i915 device info: has_pooled_eu: no

<7> [213.335759] i915 device info: rawclk rate: 24000 kHz

<7> [213.335761] i915 device info: display version: 9

<7> [213.335764] i915 device info: cursor_needs_physical: no

<7> [213.335766] i915 device info: has_cdclk_crawl: no

<7> [213.335768] i915 device info: has_cdclk_squash: no

<7> [213.335770] i915 device info: has_ddi: yes

<7> [213.335772] i915 device info: has_dp_mst: yes

<7> [213.335774] i915 device info: has_dsb: no

<7> [213.335776] i915 device info: has_fpga_dbg: yes

<7> [213.335778] i915 device info: has_gmch: no

<7> [213.335780] i915 device info: has_hotplug: yes

<7> [213.335782] i915 device info: has_hti: no

<7> [213.335784] i915 device info: has_ipc: yes

<7> [213.335787] i915 device info: has_overlay: no

<7> [213.335789] i915 device info: has_psr: yes

<7> [213.335805] i915 device info: has_psr_hw_tracking: yes

<7> [213.335808] i915 device info: overlay_needs_physical: no

<7> [213.335810] i915 device info: supports_tv: no

<7> [213.335812] i915 device info: has_hdcp: yes

<7> [213.335815] i915 device info: has_dmc: yes

<7> [213.335817] i915 device info: has_dsc: no

<7> [213.335819] i915 device info: iommu: disabled

<7> [213.335822] i915 device info: available engines: 40403

<7> [213.335824] i915 device info: slice total: 1, mask=0001

<7> [213.335827] i915 device info: subslice total: 3

<7> [213.335830] i915 device info: slice0: 3 subslices, mask=00000007

<7> [213.335832] i915 device info: slice1: 0 subslices, mask=00000000

<7> [213.335835] i915 device info: slice2: 0 subslices, mask=00000000

<7> [213.335837] i915 device info: EU total: 24

<7> [213.335840] i915 device info: EU per subslice: 8

<7> [213.335842] i915 device info: has slice power gating: no

<7> [213.335844] i915 device info: has subslice power gating: no

<7> [213.335846] i915 device info: has EU power gating: yes

<6> [213.335849] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [213.335852] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [213.335854] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [213.335859] i915: Performing live selftests with st_random_seed=0x2f067e7 st_timeout=500

<6> [213.335881] i915: Running intel_gt_pm_live_selftests/live_gt_clocks

<7> [213.336178] [drm:drm_client_modeset_probe]

<7> [213.336210] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [213.336216] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [213.336387] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [213.336392] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]

<7> [213.336397] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [213.336618] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [213.336623] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1]

<7> [213.336628] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [213.336798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:DP-1] disconnected

<7> [213.336803] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3]

<7> [213.336807] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [213.336976] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [213.336981] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2]

<7> [213.336985] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [213.337150] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:120:DP-2] disconnected

<7> [213.337155] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [213.337158] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [213.337161] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [213.337164] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [213.337167] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [213.337170] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [213.337197] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [213.337205] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [213.337231] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [213.337239] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [213.341236] rcs0: TIMESTAMP 12024 cycles [1002000ns] in 1002046ns [12025 cycles], using CS clock frequency of 12000KHz

<6> [213.346283] bcs0: TIMESTAMP 12022 cycles [1001834ns] in 1002009ns [12025 cycles], using CS clock frequency of 12000KHz

<6> [213.351325] vcs0: TIMESTAMP 12022 cycles [1001834ns] in 1002001ns [12025 cycles], using CS clock frequency of 12000KHz

<6> [213.356363] vecs0: TIMESTAMP 12021 cycles [1001750ns] in 1001816ns [12022 cycles], using CS clock frequency of 12000KHz

<6> [213.357442] i915: Running intel_gt_pm_live_selftests/live_rc6_manual

<7> [213.459929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.563646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.564548] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.565376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.566769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<6> [213.723603] GPU consumed 609768uW in RC0 and 0uW in RC6

<6> [213.723965] i915: Running intel_gt_pm_live_selftests/live_rps_clock_interval

<7> [213.724593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.725537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.726980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<6> [213.744370] rcs0: rps counted 752 C0 cycles [1002667ns] in 1003446ns [753 cycles], using GT clock frequency of 12000KHz

<6> [213.765749] i915: Running intel_gt_pm_live_selftests/live_rps_control

<6> [213.775576] rcs0: range:[15:350MHz, 48:1200MHz] limit:[48:1200MHz], 15:48 response 33360ns:108146ns

<6> [213.781009] bcs0: range:[15:350MHz, 48:1200MHz] limit:[48:1200MHz], 15:48 response 31145ns:88598ns

<6> [213.787439] vcs0: range:[15:350MHz, 48:1200MHz] limit:[48:1200MHz], 15:48 response 31527ns:91777ns

<6> [213.795278] vecs0: range:[15:350MHz, 48:1200MHz] limit:[48:1200MHz], 15:48 response 31943ns:91747ns

<6> [213.804784] i915: Running intel_gt_pm_live_selftests/live_rps_frequency_cs

<6> [213.849475] rcs0: min:38252KHz @ 350MHz, max:127765KHz @ 1200MHz [97%]

<6> [213.890474] bcs0: min:38220KHz @ 350MHz, max:127771KHz @ 1200MHz [98%]

<6> [213.930474] vcs0: min:38204KHz @ 350MHz, max:127596KHz @ 1200MHz [97%]

<6> [213.970475] vecs0: min:38273KHz @ 350MHz, max:127771KHz @ 1200MHz [97%]

<6> [213.977641] i915: Running intel_gt_pm_live_selftests/live_rps_frequency_srm

<6> [214.017475] rcs0: min:5011KHz @ 350MHz, max:13813KHz @ 1200MHz [80%]

<6> [214.058475] bcs0: min:6034KHz @ 350MHz, max:14814KHz @ 1200MHz [72%]

<6> [214.098476] vcs0: min:6034KHz @ 350MHz, max:14814KHz @ 1200MHz [72%]

<6> [214.138475] vecs0: min:6034KHz @ 350MHz, max:14814KHz @ 1200MHz [72%]

<6> [214.145653] i915: Running intel_gt_pm_live_selftests/live_rps_power

<6> [214.245589] rcs0: min:802mW @ 3083MHz, max:6694mW @ 10600MHz

<6> [214.343606] bcs0: min:668mW @ 3083MHz, max:5481mW @ 10600MHz

<6> [214.441611] vcs0: min:719mW @ 3083MHz, max:5725mW @ 10600MHz

<6> [214.539605] vecs0: min:686mW @ 3083MHz, max:5546mW @ 10600MHz

<6> [214.551706] i915: Running intel_gt_pm_live_selftests/live_rps_interrupt

<6> [214.551765] i915: Running intel_gt_pm_live_selftests/live_rps_dynamic

<6> [214.595581] rcs0: dynamically reclocked to 72:1200MHz while busy in 19642957ns, and 21:350MHz while idle in 20006269ns

<6> [214.636583] bcs0: dynamically reclocked to 72:1200MHz while busy in 19461480ns, and 21:350MHz while idle in 20009619ns

<6> [214.677922] vcs0: dynamically reclocked to 72:1200MHz while busy in 19713842ns, and 21:350MHz while idle in 20334549ns

<6> [214.718580] vecs0: dynamically reclocked to 72:1200MHz while busy in 19467832ns, and 21:350MHz while idle in 19977044ns

<6> [214.730766] i915: Running intel_gt_pm_live_selftests/live_gt_resume

<6> [214.732059] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.732086] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.739630] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.740793] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.741702] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.741713] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.744777] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.744795] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.750629] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.751787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.752671] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.752682] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.758691] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.758711] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.765625] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.766903] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.768123] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.768141] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.773586] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.773607] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.780551] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 3ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.781782] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.783001] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.783020] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.787711] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.787738] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.794626] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.795902] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.797107] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.797125] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.801996] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.802023] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.809640] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.810779] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.811691] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.811702] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.815814] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.815842] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.823644] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.824799] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.825650] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.825663] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.828950] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.828969] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.836621] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.837816] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.838725] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.838737] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.842236] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.842255] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.850614] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.851870] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.853077] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.853096] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.857452] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.857545] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.863617] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.864760] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.865651] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.865663] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.869300] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.869318] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.876608] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.877853] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.879039] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.879059] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.883659] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.883686] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.891602] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.892388] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.892996] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.893004] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.895510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.895523] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.900536] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.901375] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.902006] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.902019] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.905315] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.905334] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.912605] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.913390] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.914012] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.914024] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.917427] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.917444] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.924747] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.925612] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.926401] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.926414] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.929429] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.929443] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.936597] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.937388] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.938002] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.938010] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.940430] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.940443] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.945599] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.946391] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.947009] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.947017] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.949365] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.949378] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.954558] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.955396] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.956004] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.956012] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.958464] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.958507] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.963606] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.964443] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.965054] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.965061] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.967379] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.967393] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.972532] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.973370] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.973987] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.973994] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.976285] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.976298] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.981570] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.982408] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.983023] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.983031] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.985281] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.985293] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.990606] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [214.991397] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [214.992019] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [214.992027] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [214.994306] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [214.994319] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [214.999605] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.000438] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.001051] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.001059] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.003568] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.003581] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.010586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.011376] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.011989] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.011997] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.014264] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.014277] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.019374] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.020250] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.020872] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.020880] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.023303] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.023321] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.028579] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.029371] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.029984] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.029992] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.032296] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.032309] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.037350] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.038214] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.038832] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.038841] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.041118] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.041131] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.047600] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.048389] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.049007] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.049014] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.051668] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.051682] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.058570] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.059360] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.060050] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.060058] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.062427] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.062441] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.067586] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.068533] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.069092] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.069100] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.071623] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.071638] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.078606] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.079393] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.080004] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.080011] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.082449] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.082462] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.087570] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.088364] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.088973] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.088981] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.091279] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.091292] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.096380] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.097203] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.097809] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.097817] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.100159] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.100171] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.106608] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.107403] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.108012] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.108020] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.110433] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.110446] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.115517] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.116307] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.116926] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.116934] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.119287] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.119299] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.124364] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.125217] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.125830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.125838] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.128120] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.128133] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.134576] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.135365] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.135979] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.135987] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.138216] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.138228] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.143522] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.144354] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.144964] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.144972] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.147278] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.147290] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.152350] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.153168] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.153777] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.153785] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.156250] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.156263] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.161361] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.162230] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.162845] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.162852] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.165088] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.165100] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.170329] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.171199] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.171817] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.171825] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.174130] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.174143] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.179574] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.180364] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.180972] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.180980] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.183278] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.183291] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.190595] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.191427] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.192047] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.192055] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.194411] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.194423] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.199524] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.200363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.200977] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.200984] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.203249] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.203261] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.210598] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.211432] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.212043] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.212052] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.214293] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.214307] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.219451] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.220315] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.220922] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.220929] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.223430] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.223443] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.228528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.229311] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.229926] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.229933] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [215.232388] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [215.232402] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [215.237540] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [215.238323] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [215.238961] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [215.238973] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [215.241156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.242283] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [215.242981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [215.243769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [215.244556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [215.271932] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [215.345685] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [215.400801] i915: probe of 0000:00:02.0 failed with error -25

<6> [215.567409] [IGT] i915_selftest: finished subtest gt_pm, SUCCESS

Results for igt@i915_selftest@live@gt_pm