Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.27.1-g605d12880 (x86_64) (Linux: 6.6.0-rc1-linus-v6.6-rc1-g0bb80ecc33a8+ x86_64)
Out 
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.608s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.608s)
Dmesg
<7> [111.472593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [111.526385] Console: switching to colour dummy device 80x25
<6> [111.526507] [IGT] kms_force_connector_basic: executing
<7> [111.530599] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [111.531385] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [111.531683] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [111.532388] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [111.532420] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [111.532432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [111.532653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [111.583612] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [111.604003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [111.604019] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [111.604338] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [111.623117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [111.623127] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [111.623322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [111.623589] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [111.623677] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [111.623689] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [111.623961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [111.675613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [111.694929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [111.694945] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [111.695269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [111.713005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [111.713013] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [111.713204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [111.713463] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [111.713532] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [111.713543] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [111.713816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [111.765610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [111.784947] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [111.784962] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [111.785279] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [111.803039] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [111.803048] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [111.803241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [111.803500] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<6> [111.803662] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [111.803929] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [111.803937] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [111.803945] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [111.804154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [111.855612] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [111.876001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [111.876032] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [111.876354] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [111.895120] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [111.895135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [111.895325] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [111.895587] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from disconnected to connected
<7> [111.895740] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [111.895749] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [111.895760] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [111.895770] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [111.895780] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [111.895789] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [111.895869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [111.895877] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [111.896113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [111.947617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [111.967483] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [111.967511] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [111.967833] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [111.987716] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [111.987735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [111.988058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [111.988614] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [111.988625] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [111.988636] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [111.988646] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [111.988654] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [111.988663] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [111.989056] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:114:HDMI-A-1] EDID override set
<7> [111.989100] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [111.989110] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [111.989474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [111.989872] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD monitor IGT
<7> [111.989882] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD size 24, SAD count 0
<7> [112.040617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [112.058781] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [112.058807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.059287] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.059299] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [112.059311] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [112.059319] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [112.059330] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [112.059337] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [112.059345] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [112.059352] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [112.059359] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.059366] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.059372] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [112.059777] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:114:HDMI-A-1] EDID override set
<7> [112.059848] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [112.059860] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [112.060300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.060814] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD monitor IGT
<7> [112.060828] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:114:HDMI-A-1] ELD size 24, SAD count 0
<7> [112.060839] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:114:HDMI-A-1] EDID changed, epoch counter 4
<7> [112.112613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [112.131429] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [112.131459] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.132002] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [112.132016] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [112.132032] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [112.132041] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [112.132050] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [112.132058] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.132067] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.132075] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [112.132345] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:114:HDMI-A-1] EDID override reset
<7> [112.132430] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [112.132444] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [112.132957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.184626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [112.207951] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.207992] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.208520] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.229412] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.229428] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.229631] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:114:HDMI-A-1] EDID changed, epoch counter 5
<7> [112.229651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.229983] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [112.229992] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [112.230003] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [112.230010] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [112.230020] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] probed modes :
<7> [112.230026] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.230033] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.230039] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.230044] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [112.230050] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [112.230283] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [112.230291] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [112.230299] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [112.230555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.282613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [112.302991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.303009] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.303334] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.322724] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.322734] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.322954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.323208] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] status updated from connected to disconnected
<7> [112.323229] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [112.323473] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [112.323488] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [112.323857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.375611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [112.393828] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.393841] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.394122] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.411743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.411750] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.411925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.412126] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<6> [112.412273] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [112.412518] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [112.413141] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:DP-1] EDID override reset
<7> [112.413170] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [112.413178] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.413384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.413946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.414556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.415192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.416111] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [112.416536] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [112.417607] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.419275] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.420908] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.422431] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.424225] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.425988] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.427759] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.429666] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.431292] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.432154] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [112.433034] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [112.433725] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [112.434271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.434666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.434998] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.435318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.436122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.436481] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [112.436735] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:108:DP-2] EDID override reset
<7> [112.436775] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]
<7> [112.436785] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [112.437096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.437765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.438106] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected
<7> [112.438422] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [112.438432] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [112.438442] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [112.438753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.490611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [112.510484] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.510498] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.510778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.530012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.530020] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.530195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.530420] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [112.530507] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [112.530518] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [112.530827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.582611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [112.601434] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.601452] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.601826] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.623370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.623381] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.623665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.624016] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [112.624232] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:114:HDMI-A-1] EDID override reset
<7> [112.624272] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [112.624281] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [112.624627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.675615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [112.694979] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.694996] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.695352] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.713664] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.713673] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.713877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.714113] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<6> [112.714770] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [112.714990] [drm:status_store] [CONNECTOR:114:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [112.715000] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [112.715009] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [112.715234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.766613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [112.786532] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.786549] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.786871] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.805105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.805114] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.805309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.805571] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [112.805991] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [112.806760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.807036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.807586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.808368] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [112.808377] [drm:drm_client_modeset_probe]
<7> [112.808462] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [112.808475] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.808776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.809442] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [112.809658] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [112.810702] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.812276] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.813874] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.815729] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.817434] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.819229] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.821006] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.822775] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.824434] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [112.825303] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [112.826254] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [112.826968] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [112.827457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.827717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.828025] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.828227] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.828950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.829274] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [112.829286] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2]
<7> [112.829293] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [112.829508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.830063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.830341] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-2] disconnected
<7> [112.830352] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1]
<7> [112.830362] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [112.830662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.882611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [112.902531] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.902547] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.902859] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.921621] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.921629] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.921822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.922045] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [112.922054] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [112.922060] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [112.922065] [drm:drm_client_modeset_probe] connector 108 enabled? no
<7> [112.922069] [drm:drm_client_modeset_probe] connector 114 enabled? no
<7> [112.922116] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [112.922129] [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [112.922459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.922804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.923354] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<6> [112.925334] Console: switching to colour frame buffer device 128x48
Created at 2023-09-11 01:21:38