<5>[ 0.000000] Linux version 6.5.0-linus-v6.5-g2dde18cd1d8f+ (kbuild@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.2) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Sun Aug 27 22:13:18 UTC 2023 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ca3cfff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006ca3d000-0x000000006fdb4fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fdb5000-0x000000006fedbfff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006fedc000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fe11000 SMBIOS=0x6cb14000 MEMATTR=0x67fa3698 ESRT=0x67fab798 TPMEventLog=0x67e93018 <6>[ 0.000000] efi: Remove mem283: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem285: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000019] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000020] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.000391] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved <7>[ 0.000393] e820: update [mem 0x87f800000-0x87fffffff] usable ==> reserved <6>[ 0.000396] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000397] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.000400] esrt: Reserving ESRT space from 0x0000000067fab798 to 0x0000000067fab910. <7>[ 0.000405] e820: update [mem 0x67fab000-0x67fabfff] usable ==> reserved <6>[ 0.000422] Using GB pages for direct mapping <6>[ 0.001182] printk: log_buf_len: 1048576 bytes <6>[ 0.001184] printk: early log buf free: 259072(98%) <6>[ 0.001185] Secure boot disabled <6>[ 0.001186] ACPI: Early table checksum verification disabled <6>[ 0.001189] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.001192] ACPI: XSDT 0x000000006FF19228 000174 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001198] ACPI: FACP 0x000000006FFDE000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001201] ACPI: DSDT 0x000000006FF57000 083505 (v02 INTEL MTL 00000002 01000013) <6>[ 0.001204] ACPI: FACS 0x000000006FDF6000 000040 <6>[ 0.001206] ACPI: SSDT 0x000000006FFFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001209] ACPI: SSDT 0x000000006FFFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001211] ACPI: SSDT 0x000000006FFFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001213] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001216] ACPI: SSDT 0x000000006FFF7000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001218] ACPI: SSDT 0x000000006FFF5000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001220] ACPI: SSDT 0x000000006FFF3000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001222] ACPI: SSDT 0x000000006FFEF000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001225] ACPI: DTPR 0x000000006FFEE000 000098 (v01 00000000 00000000) <6>[ 0.001227] ACPI: SSDT 0x000000006FFED000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001229] ACPI: SSDT 0x000000006FFEA000 002447 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001232] ACPI: SSDT 0x000000006FFE0000 0096C5 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001234] ACPI: SSDT 0x000000006FFDF000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001236] ACPI: HPET 0x000000006FFDD000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001238] ACPI: APIC 0x000000006FFDC000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001240] ACPI: MCFG 0x000000006FFDB000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001243] ACPI: SSDT 0x000000006FF47000 00FD75 (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001245] ACPI: SSDT 0x000000006FF45000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001247] ACPI: SSDT 0x000000006FF41000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001249] ACPI: SSDT 0x000000006FF3B000 005331 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001251] ACPI: SSDT 0x000000006FFFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001254] ACPI: TPM2 0x000000006FF39000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001256] ACPI: LPIT 0x000000006FF38000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001258] ACPI: WSMT 0x000000006FF37000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001260] ACPI: SSDT 0x000000006FF36000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001263] ACPI: SSDT 0x000000006FF35000 00012A (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001265] ACPI: DBGP 0x000000006FF34000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001267] ACPI: DBG2 0x000000006FF33000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001269] ACPI: NHLT 0x000000006FF31000 001383 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001271] ACPI: SSDT 0x000000006FF2F000 001171 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001274] ACPI: SSDT 0x000000006FF29000 005CA6 (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001276] ACPI: ECDT 0x000000006FF28000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001278] ACPI: DMAR 0x000000006FF27000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001280] ACPI: FPDT 0x000000006FF26000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001283] ACPI: SSDT 0x000000006FF24000 001001 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001285] ACPI: SSDT 0x000000006FF21000 002534 (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001287] ACPI: SSDT 0x000000006FF1E000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001289] ACPI: SSDT 0x000000006FF1C000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001292] ACPI: ASF! 0x000000006FF1B000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001294] ACPI: PHAT 0x000000006FF1A000 000850 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001296] ACPI: BGRT 0x000000006FF3A000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001298] ACPI: Reserving FACP table memory at [mem 0x6ffde000-0x6ffde113] <6>[ 0.001299] ACPI: Reserving DSDT table memory at [mem 0x6ff57000-0x6ffda504] <6>[ 0.001300] ACPI: Reserving FACS table memory at [mem 0x6fdf6000-0x6fdf603f] <6>[ 0.001301] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc38b] <6>[ 0.001301] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb70c] <6>[ 0.001302] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5e3] <6>[ 0.001303] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.001303] ACPI: Reserving SSDT table memory at [mem 0x6fff7000-0x6fff8bae] <6>[ 0.001304] ACPI: Reserving SSDT table memory at [mem 0x6fff5000-0x6fff661f] <6>[ 0.001304] ACPI: Reserving SSDT table memory at [mem 0x6fff3000-0x6fff4348] <6>[ 0.001305] ACPI: Reserving SSDT table memory at [mem 0x6ffef000-0x6fff2bc7] <6>[ 0.001306] ACPI: Reserving DTPR table memory at [mem 0x6ffee000-0x6ffee097] <6>[ 0.001306] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6ffedd02] <6>[ 0.001307] ACPI: Reserving SSDT table memory at [mem 0x6ffea000-0x6ffec446] <6>[ 0.001308] ACPI: Reserving SSDT table memory at [mem 0x6ffe0000-0x6ffe96c4] <6>[ 0.001308] ACPI: Reserving SSDT table memory at [mem 0x6ffdf000-0x6ffdf0f8] <6>[ 0.001309] ACPI: Reserving HPET table memory at [mem 0x6ffdd000-0x6ffdd037] <6>[ 0.001310] ACPI: Reserving APIC table memory at [mem 0x6ffdc000-0x6ffdc357] <6>[ 0.001310] ACPI: Reserving MCFG table memory at [mem 0x6ffdb000-0x6ffdb03b] <6>[ 0.001311] ACPI: Reserving SSDT table memory at [mem 0x6ff47000-0x6ff56d74] <6>[ 0.001311] ACPI: Reserving SSDT table memory at [mem 0x6ff45000-0x6ff4647e] <6>[ 0.001312] ACPI: Reserving SSDT table memory at [mem 0x6ff41000-0x6ff4489b] <6>[ 0.001313] ACPI: Reserving SSDT table memory at [mem 0x6ff3b000-0x6ff40330] <6>[ 0.001313] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffd60d] <6>[ 0.001314] ACPI: Reserving TPM2 table memory at [mem 0x6ff39000-0x6ff3904b] <6>[ 0.001315] ACPI: Reserving LPIT table memory at [mem 0x6ff38000-0x6ff380cb] <6>[ 0.001315] ACPI: Reserving WSMT table memory at [mem 0x6ff37000-0x6ff37027] <6>[ 0.001316] ACPI: Reserving SSDT table memory at [mem 0x6ff36000-0x6ff36ca5] <6>[ 0.001317] ACPI: Reserving SSDT table memory at [mem 0x6ff35000-0x6ff35129] <6>[ 0.001317] ACPI: Reserving DBGP table memory at [mem 0x6ff34000-0x6ff34033] <6>[ 0.001318] ACPI: Reserving DBG2 table memory at [mem 0x6ff33000-0x6ff33053] <6>[ 0.001318] ACPI: Reserving NHLT table memory at [mem 0x6ff31000-0x6ff32382] <6>[ 0.001319] ACPI: Reserving SSDT table memory at [mem 0x6ff2f000-0x6ff30170] <6>[ 0.001320] ACPI: Reserving SSDT table memory at [mem 0x6ff29000-0x6ff2eca5] <6>[ 0.001320] ACPI: Reserving ECDT table memory at [mem 0x6ff28000-0x6ff28068] <6>[ 0.001321] ACPI: Reserving DMAR table memory at [mem 0x6ff27000-0x6ff270a7] <6>[ 0.001322] ACPI: Reserving FPDT table memory at [mem 0x6ff26000-0x6ff26043] <6>[ 0.001322] ACPI: Reserving SSDT table memory at [mem 0x6ff24000-0x6ff25000] <6>[ 0.001323] ACPI: Reserving SSDT table memory at [mem 0x6ff21000-0x6ff23533] <6>[ 0.001324] ACPI: Reserving SSDT table memory at [mem 0x6ff1e000-0x6ff208d2] <6>[ 0.001324] ACPI: Reserving SSDT table memory at [mem 0x6ff1c000-0x6ff1d19f] <6>[ 0.001325] ACPI: Reserving ASF! table memory at [mem 0x6ff1b000-0x6ff1b073] <6>[ 0.001325] ACPI: Reserving PHAT table memory at [mem 0x6ff1a000-0x6ff1a84f] <6>[ 0.001326] ACPI: Reserving BGRT table memory at [mem 0x6ff3a000-0x6ff3a037] <6>[ 0.001338] Setting APIC routing to cluster x2apic. <6>[ 0.045893] Zone ranges: <6>[ 0.045895] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.045897] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.045899] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045900] Movable zone start for each node <6>[ 0.045901] Early memory node ranges <6>[ 0.045901] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.045903] node 0: [mem 0x0000000000100000-0x000000006ca3cfff] <6>[ 0.045904] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.045904] node 0: [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045906] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.045909] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.045933] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.048383] On node 0, zone DMA32: 13762 pages in unavailable ranges <6>[ 0.090867] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.091254] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.091260] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.091305] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.091308] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.091310] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.091312] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.091314] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.091321] e820: update [mem 0x67f4a000-0x67f64fff] usable ==> reserved <6>[ 0.091328] TSC deadline timer available <6>[ 0.091329] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.091339] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.091340] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.091341] PM: hibernation: Registered nosave memory: [mem 0x67f4a000-0x67f64fff] <6>[ 0.091342] PM: hibernation: Registered nosave memory: [mem 0x67fab000-0x67fabfff] <6>[ 0.091343] PM: hibernation: Registered nosave memory: [mem 0x6ca3d000-0x6fdb4fff] <6>[ 0.091344] PM: hibernation: Registered nosave memory: [mem 0x6fdb5000-0x6fedbfff] <6>[ 0.091344] PM: hibernation: Registered nosave memory: [mem 0x6fedc000-0x6fffefff] <6>[ 0.091345] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff] <6>[ 0.091346] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff] <6>[ 0.091346] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.091347] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.091349] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.091354] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.094656] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.096148] percpu: Embedded 72 pages/cpu s254752 r8192 d31968 u524288 <7>[ 0.096153] pcpu-alloc: s254752 r8192 d31968 u524288 alloc=1*2097152 <7>[ 0.096155] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.096161] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.096167] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.096180] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.096250] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.096281] random: crng init done <6>[ 0.099098] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.100498] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.100601] Built 1 zonelists, mobility grouping on. Total pages: 8177205 <6>[ 0.100605] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.100606] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.101329] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.101343] software IO TLB: area num 32. <6>[ 0.781151] Memory: 32435036K/33228656K available (16384K kernel code, 2618K rwdata, 5444K rodata, 2568K init, 21160K bss, 793364K reserved, 0K cma-reserved) <4>[ 0.781154] ********************************************************** <4>[ 0.781155] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.781156] ** ** <4>[ 0.781156] ** This system shows unhashed kernel memory addresses ** <4>[ 0.781157] ** via the console, logs, and other interfaces. This ** <4>[ 0.781157] ** might reduce the security of your system. ** <4>[ 0.781158] ** ** <4>[ 0.781158] ** If you see this message and you are not debugging ** <4>[ 0.781159] ** the kernel, report this immediately to your system ** <4>[ 0.781159] ** administrator! ** <4>[ 0.781159] ** ** <4>[ 0.781160] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.781160] ********************************************************** <6>[ 0.781332] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.781808] Dynamic Preempt: full <6>[ 0.782042] Running RCU self tests <6>[ 0.782043] Running RCU synchronous self tests <6>[ 0.782087] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.782088] rcu: RCU lockdep checking is enabled. <6>[ 0.782089] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.782090] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.782090] Trampoline variant of Tasks RCU enabled. <6>[ 0.782091] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.782092] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.782159] Running RCU synchronous self tests <6>[ 0.786228] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.786617] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.786958] Console: colour dummy device 80x25 <6>[ 0.786971] printk: console [tty1] enabled <6>[ 0.789010] printk: console [ttyS0] enabled <4>[ 2.270156] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 2.277881] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 2.281977] ... MAX_LOCK_DEPTH: 48 <4>[ 2.286157] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 2.290511] ... CLASSHASH_SIZE: 4096 <4>[ 2.294869] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 2.299306] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 2.303833] ... CHAINHASH_SIZE: 65536 <4>[ 2.308271] memory used by lock dependency info: 9461 kB <4>[ 2.313662] memory used for stack traces: 8320 kB <4>[ 2.318446] per task-struct memory footprint: 1920 bytes <6>[ 2.323852] ACPI: Core revision 20230331 <6>[ 2.328753] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns <6>[ 2.337939] APIC: Switch to symmetric I/O mode setup <6>[ 2.342955] DMAR: Host address width 42 <6>[ 2.346830] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 2.352204] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 2.361013] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 2.366372] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a04f0efde <6>[ 2.375178] DMAR: SATC flags: 0x1 <6>[ 2.378545] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 2.384934] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 2.390367] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 2.400740] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 2.410844] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 2.421846] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 2.432358] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 2.433414] x86/tme: not enabled by BIOS <6>[ 2.434360] CPU0: Thermal monitoring enabled (TM1) <6>[ 2.435357] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 2.436545] process: using mwait in idle threads <6>[ 2.437360] CET detected: Indirect Branch Tracking enabled <6>[ 2.438358] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 2.439357] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 2.440360] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 2.441361] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 2.442357] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 2.443362] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 2.444361] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 2.445371] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 2.446360] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 2.447358] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 2.448358] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 2.449360] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 2.450357] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 2.451357] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. <6>[ 2.464308] Freeing SMP alternatives memory: 36K <6>[ 2.464359] pid_max: default: 32768 minimum: 301 <6>[ 2.473533] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.474412] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.476719] Running RCU synchronous self tests <6>[ 2.477358] Running RCU synchronous self tests <6>[ 2.478531] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 2.479812] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 2.480392] Running RCU-tasks wait API self tests <6>[ 2.589370] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 2.590481] core: cpu_core PMU driver: <6>[ 2.591358] ... version: 5 <6>[ 2.592357] ... bit width: 48 <6>[ 2.595360] ... generic registers: 8 <6>[ 2.596357] ... value mask: 0000ffffffffffff <6>[ 2.597372] ... max period: 00007fffffffffff <6>[ 2.598358] ... fixed-purpose events: 4 <6>[ 2.599356] ... event mask: 0000000f000000ff <6>[ 2.600417] signal: max sigframe size: 3632 <6>[ 2.601373] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 2.602430] rcu: Hierarchical SRCU implementation. <6>[ 2.603357] rcu: Max phase no-delay instances is 400. <6>[ 2.606397] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 2.607930] smp: Bringing up secondary CPUs ... <6>[ 2.608654] smpboot: x86: Booting SMP configuration: <6>[ 2.609367] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 1.627591] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 1.627591] ... version: 5 <6>[ 1.627591] ... bit width: 48 <6>[ 1.627591] ... generic registers: 8 <6>[ 1.627591] ... value mask: 0000ffffffffffff <6>[ 1.627591] ... max period: 00007fffffffffff <6>[ 1.627591] ... fixed-purpose events: 3 <6>[ 1.627591] ... event mask: 00000007000000ff <4>[ 2.666468] #1 #3 #5 #7 #9 #11 <6>[ 2.672376] smp: Brought up 1 node, 22 CPUs <6>[ 2.674357] smpboot: Max logical packages: 1 <6>[ 2.675356] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 2.681534] devtmpfs: initialized <6>[ 2.683420] ACPI: PM: Registering ACPI NVS region [mem 0x6fdb5000-0x6fedbfff] (1208320 bytes) <6>[ 2.684801] Running RCU synchronous self tests <6>[ 2.685371] Running RCU synchronous self tests <6>[ 2.686426] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 2.687370] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 2.688644] pinctrl core: initialized pinctrl subsystem <6>[ 2.689807] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 2.691545] thermal_sys: Registered thermal governor 'fair_share' <6>[ 2.691547] thermal_sys: Registered thermal governor 'step_wise' <6>[ 2.692359] thermal_sys: Registered thermal governor 'user_space' <6>[ 2.693415] cpuidle: using governor menu <6>[ 2.695432] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 2.696609] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 2.697370] PCI: not using MMCONFIG <6>[ 2.698366] PCI: Using configuration type 1 for base access <4>[ 2.700725] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 2.701421] Callback from call_rcu_tasks() invoked. <6>[ 2.702400] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 2.711479] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.717371] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.724545] cryptd: max_cpu_qlen set to 1000 <6>[ 2.746177] raid6: avx2x4 gen() 54322 MB/s <6>[ 2.767133] raid6: avx2x2 gen() 54517 MB/s <6>[ 2.788129] raid6: avx2x1 gen() 53840 MB/s <6>[ 2.792356] raid6: using algorithm avx2x2 gen() 54517 MB/s <6>[ 2.813669] raid6: .... xor() 37082 MB/s, rmw enabled <6>[ 2.819358] raid6: using avx2x2 recovery algorithm <6>[ 2.823641] ACPI: Added _OSI(Module Device) <6>[ 2.828357] ACPI: Added _OSI(Processor Device) <6>[ 2.832356] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 2.837358] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 3.239062] ACPI: 26 ACPI AML tables successfully acquired and loaded <6>[ 3.256544] ACPI: EC: EC started <6>[ 3.259350] ACPI: EC: interrupt blocked <6>[ 3.267800] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.272358] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 3.542976] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked <6>[ 5.179949] ACPI: Interpreter enabled <6>[ 5.183477] ACPI: PM: (supports S0 S4 S5) <6>[ 5.187362] ACPI: Using IOAPIC for interrupt routing <6>[ 5.192509] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 5.233915] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource <6>[ 5.242379] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 5.251363] PCI: Ignoring E820 reservations for host bridge windows <6>[ 5.283183] ACPI: Enabled 9 GPEs in block 00 to 7F <6>[ 5.283349] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 5.338794] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 5.472316] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 5.483855] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 5.506746] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 5.519558] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 5.537715] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 5.549108] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 5.560710] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 5.572333] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 5.641526] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 5.647652] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 5.652647] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 5.948139] ACPI: \_TZ_.FN00: New power resource <6>[ 5.952911] ACPI: \_TZ_.FN01: New power resource <6>[ 5.957911] ACPI: \_TZ_.FN02: New power resource <6>[ 5.963910] ACPI: \_TZ_.FN03: New power resource <6>[ 5.968891] ACPI: \_TZ_.FN04: New power resource <6>[ 5.977176] ACPI: \PIN_: New power resource <6>[ 5.983838] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 5.989371] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 6.001665] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 6.014749] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 6.030788] PCI host bridge to bus 0000:00 <6>[ 6.035361] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 6.041365] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 6.048362] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 6.056363] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 6.063363] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 6.071365] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 6.085103] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 <6>[ 6.091887] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 <6>[ 6.098374] pci 0000:00:02.0: reg 0x10: [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 6.105372] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 6.113405] pci 0000:00:02.0: BAR 2: assigned to efifb <6>[ 6.118362] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 6.126408] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 6.133469] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 <6>[ 6.139375] pci 0000:00:04.0: reg 0x10: [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 6.147498] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 <6>[ 6.153369] pci 0000:00:05.0: reg 0x10: [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 6.160389] pci 0000:00:05.0: enabling Extended Tags <6>[ 6.166147] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 <6>[ 6.172495] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 6.182433] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 <6>[ 6.188597] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 6.198013] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 <6>[ 6.204585] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 6.214012] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 <6>[ 6.220377] pci 0000:00:08.0: reg 0x10: [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 6.227742] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 <6>[ 6.233368] pci 0000:00:0a.0: reg 0x10: [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 6.240382] pci 0000:00:0a.0: enabling Extended Tags <6>[ 6.245555] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 <6>[ 6.251370] pci 0000:00:0b.0: reg 0x10: [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 6.259375] pci 0000:00:0b.0: reg 0x20: [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 6.266750] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 <6>[ 6.272377] pci 0000:00:0d.0: reg 0x10: [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 6.279436] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 6.286849] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 <6>[ 6.292376] pci 0000:00:0d.3: reg 0x10: [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 6.300372] pci 0000:00:0d.3: reg 0x18: [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 6.307423] pci 0000:00:0d.3: supports D1 D2 <6>[ 6.311357] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 6.318495] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 <6>[ 6.325373] pci 0000:00:12.0: reg 0x10: [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 6.332423] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 6.339628] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 <6>[ 6.345376] pci 0000:00:14.0: reg 0x10: [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 6.353438] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 6.360097] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 <6>[ 6.366377] pci 0000:00:14.2: reg 0x10: [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 6.373374] pci 0000:00:14.2: reg 0x18: [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 6.380666] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 <6>[ 6.387407] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.394659] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 <6>[ 6.401410] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.408706] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 <6>[ 6.415409] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.422694] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 <6>[ 6.429409] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.437670] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 <6>[ 6.443382] pci 0000:00:16.0: reg 0x10: [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 6.450453] pci 0000:00:16.0: PME# supported from D3hot <6>[ 6.457625] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 <6>[ 6.463371] pci 0000:00:16.3: reg 0x10: [io 0x3020-0x3027] <6>[ 6.469364] pci 0000:00:16.3: reg 0x14: [mem 0x8e121000-0x8e121fff] <6>[ 6.475687] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 <6>[ 6.482410] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.488976] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 <6>[ 6.495409] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.503669] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 <6>[ 6.510674] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 <6>[ 6.516404] pci 0000:00:1f.3: reg 0x10: [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 6.523416] pci 0000:00:1f.3: reg 0x20: [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 6.531484] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 6.536737] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 <6>[ 6.543382] pci 0000:00:1f.4: reg 0x10: [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 6.550387] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] <6>[ 6.556462] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 <6>[ 6.563395] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] <6>[ 6.569663] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 <6>[ 6.575387] pci 0000:00:1f.6: reg 0x10: [mem 0x8e100000-0x8e11ffff] <6>[ 6.581509] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 6.589608] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 <6>[ 6.595414] pci 0000:01:00.0: reg 0x10: [mem 0x8e000000-0x8e003fff 64bit] <6>[ 6.603181] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 6.607364] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 6.614513] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 6.619382] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 6.626384] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 6.634496] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 6.640376] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 6.646384] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <7>[ 6.654400] pci_bus 0000:00: on NUMA node 0 <6>[ 9.702596] Low-power S0 idle used by default for system suspend <6>[ 10.091320] ACPI: EC: interrupt unblocked <6>[ 10.095350] ACPI: EC: event unblocked <6>[ 10.099352] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 10.104493] ACPI: EC: GPE=0x6e <6>[ 10.107489] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 10.114490] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 10.123412] iommu: Default domain type: Passthrough (set via kernel command line) <5>[ 10.131017] SCSI subsystem initialized <7>[ 10.135403] libata version 3.00 loaded. <6>[ 10.135499] ACPI: bus type USB registered <6>[ 10.139415] usbcore: registered new interface driver usbfs <6>[ 10.144390] usbcore: registered new interface driver hub <6>[ 10.150409] usbcore: registered new device driver usb <6>[ 10.155581] efivars: Registered efivars operations <6>[ 10.160472] Advanced Linux Sound Architecture Driver Initialized. <6>[ 10.166927] PCI: Using ACPI for IRQ routing <7>[ 10.189124] PCI: pci_cache_line_size set to 64 bytes <6>[ 10.189277] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window <7>[ 10.199518] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 10.199528] e820: reserve RAM buffer [mem 0x67f4a000-0x67ffffff] <7>[ 10.199531] e820: reserve RAM buffer [mem 0x67fab000-0x67ffffff] <7>[ 10.199534] e820: reserve RAM buffer [mem 0x6ca3d000-0x6fffffff] <7>[ 10.199537] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 10.199644] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 10.200349] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 10.200349] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 10.219363] vgaarb: loaded <6>[ 10.222522] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 <6>[ 10.228361] hpet0: 8 comparators, 64-bit 19.200000 MHz counter <6>[ 10.236483] clocksource: Switched to clocksource tsc-early <6>[ 10.242755] pnp: PnP ACPI init <6>[ 10.247123] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 10.253050] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 10.259504] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 10.266819] system 00:03: [io 0x06a4] has been reserved <6>[ 10.272132] system 00:03: [io 0x06a0] has been reserved <6>[ 10.296621] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 10.303234] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 10.310187] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 10.317143] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 10.323754] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 10.330712] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 10.337667] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 10.344622] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 10.356035] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 10.363053] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 10.373347] pnp: PnP ACPI: found 8 devices <6>[ 10.387722] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 10.396791] NET: Registered PF_INET protocol family <6>[ 10.401939] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 10.411723] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 10.420734] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 10.428476] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 10.436787] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 10.447039] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 10.453966] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 10.461569] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 10.469585] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 10.475269] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 10.483691] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 10.492136] pci 0000:00:07.0: BAR 7: assigned [io 0x4000-0x4fff] <6>[ 10.498222] pci 0000:00:07.3: BAR 7: assigned [io 0x5000-0x5fff] <6>[ 10.504312] pci 0000:00:15.0: BAR 0: assigned [mem 0x501a2d9000-0x501a2d9fff 64bit] <6>[ 10.511996] pci 0000:00:15.1: BAR 0: assigned [mem 0x501a2da000-0x501a2dafff 64bit] <6>[ 10.519691] pci 0000:00:15.2: BAR 0: assigned [mem 0x501a2dc000-0x501a2dcfff 64bit] <6>[ 10.527370] pci 0000:00:15.3: BAR 0: assigned [mem 0x501a2dd000-0x501a2ddfff 64bit] <6>[ 10.535050] pci 0000:00:19.0: BAR 0: assigned [mem 0x501a2de000-0x501a2defff 64bit] <6>[ 10.542727] pci 0000:00:19.1: BAR 0: assigned [mem 0x501a2df000-0x501a2dffff 64bit] <6>[ 10.550407] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff] <6>[ 10.557213] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 10.562180] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 10.568969] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 10.574210] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 10.580314] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 10.587114] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 10.595214] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 10.600452] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 10.606559] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 10.613357] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 10.621464] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 10.627636] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 10.633808] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 10.640669] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 10.647537] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 10.654835] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x8e0fffff] <6>[ 10.661094] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 10.666663] pci_bus 0000:02: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 10.672918] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 10.680474] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 10.686044] pci_bus 0000:2c: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 10.692302] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 10.700907] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 10.708223] PCI: CLS 0 bytes, default 64 <6>[ 10.712220] DMAR: No RMRR found <6>[ 10.715378] DMAR: No ATSR found <6>[ 10.718528] DMAR: IOMMU feature nest inconsistent <6>[ 10.718531] DMAR: IOMMU feature sc_support inconsistent <6>[ 10.723241] DMAR: dmar0: Using Queued invalidation <6>[ 10.733266] DMAR: dmar1: Using Queued invalidation <6>[ 10.738992] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 10.744388] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 10.749482] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 10.754577] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 10.759673] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 10.764787] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 10.769899] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 10.774992] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 10.780082] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 10.785182] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 10.790301] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 10.795471] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 10.800664] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 10.805869] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 10.811045] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 10.816276] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 10.821450] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 10.826640] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 10.831814] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 10.837017] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 10.842199] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 10.847403] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 10.852576] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 10.857812] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 10.862990] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 10.868168] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 10.873346] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 10.878524] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 10.883708] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 10.889610] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 10.896042] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 10.902472] software IO TLB: mapped [mem 0x00000000635bd000-0x00000000675bd000] (64MB) <6>[ 10.910706] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 10.918625] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 10.924365] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 10.930021] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 10.935678] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 10.943058] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 10.953083] clocksource: Switched to clocksource tsc <6>[ 10.958133] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 10.976459] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 10.985169] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 10.993035] NET: Registered PF_ALG protocol family <6>[ 10.997836] xor: automatically using best checksumming function avx <6>[ 11.004911] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 11.012298] io scheduler mq-deadline registered <6>[ 11.016826] io scheduler kyber registered <6>[ 11.022296] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 11.029177] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 11.035125] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 11.050073] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 11.056023] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 11.070137] efifb: probing for efifb <6>[ 11.073740] efifb: framebuffer at 0x4000800000, using 20252k, total 20250k <6>[ 11.080605] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 11.086778] efifb: scrolling: redraw <6>[ 11.090353] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 11.100092] Console: switching to colour frame buffer device 360x112 <6>[ 11.110579] fb0: EFI VGA frame buffer device <6>[ 11.115565] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 11.120475] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 11.131927] ACPI: button: Lid Switch [LID0] <6>[ 11.136293] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 11.144745] ACPI: button: Sleep Button [SLPB] <6>[ 11.149236] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 11.158727] ACPI: button: Power Button [PWRB] <6>[ 11.230827] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 11.236501] ACPI: thermal: Thermal Zone [TZ00] (35 C) <6>[ 11.242117] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 11.242913] ACPI: battery: Slot [BAT0] (battery present) <6>[ 11.253837] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 11.254122] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 11.262692] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 11.274193] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 11.281370] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <6>[ 11.290333] Non-volatile memory driver v1.3 <6>[ 11.294660] Linux agpgart interface v0.103 <4>[ 11.324635] tpm_crb: probe of INTC7001:00 failed with error 378 <6>[ 11.330666] ACPI: bus type drm_connector registered <6>[ 11.345747] loop: module loaded <6>[ 11.349617] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 11.350215] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 11.356277] nvme nvme0: pci function 0000:01:00.0 <6>[ 11.361331] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 11.374703] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 11.384509] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 11.389755] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 11.397160] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 11.404414] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 11.412702] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.413902] nvme nvme0: allocated 64 MiB host memory buffer. <6>[ 11.419902] usb usb1: Product: xHCI Host Controller <6>[ 11.430476] usb usb1: Manufacturer: Linux 6.5.0-linus-v6.5-g2dde18cd1d8f+ xhci-hcd <6>[ 11.438047] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 11.443211] hub 1-0:1.0: USB hub found <6>[ 11.447054] hub 1-0:1.0: 1 port detected <6>[ 11.453379] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 11.461653] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.468883] usb usb2: Product: xHCI Host Controller <6>[ 11.473928] usb usb2: Manufacturer: Linux 6.5.0-linus-v6.5-g2dde18cd1d8f+ xhci-hcd <6>[ 11.481585] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 11.486610] hub 2-0:1.0: USB hub found <6>[ 11.490455] hub 2-0:1.0: 4 ports detected <6>[ 11.512290] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 11.517538] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 11.526131] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 11.535932] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 11.541174] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 11.548624] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 11.555878] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 11.564199] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.571476] usb usb3: Product: xHCI Host Controller <6>[ 11.576362] usb usb3: Manufacturer: Linux 6.5.0-linus-v6.5-g2dde18cd1d8f+ xhci-hcd <6>[ 11.583986] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 11.589023] hub 3-0:1.0: USB hub found <6>[ 11.592880] hub 3-0:1.0: 12 ports detected <6>[ 11.607241] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 11.618816] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 11.627145] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.634422] usb usb4: Product: xHCI Host Controller <6>[ 11.639501] usb usb4: Manufacturer: Linux 6.5.0-linus-v6.5-g2dde18cd1d8f+ xhci-hcd <6>[ 11.641674] nvme0n1: p1 p2 <6>[ 11.647323] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 11.655412] hub 4-0:1.0: USB hub found <6>[ 11.659281] hub 4-0:1.0: 2 ports detected <6>[ 11.670875] usbcore: registered new interface driver usb-storage <6>[ 11.677429] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 11.684259] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 12.396114] i8042: Can't read CTR while initializing i8042 <4>[ 12.401643] i8042: probe of i8042 failed with error -5 <6>[ 12.407117] mousedev: PS/2 mouse device common for all mice <6>[ 12.413721] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 12.420629] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 12.425563] rtc_cmos rtc_cmos: setting system clock to 1998-02-24T11:10:29 UTC (888318629) <6>[ 12.434059] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 12.441223] IR JVC protocol handler initialized <6>[ 12.445793] IR MCE Keyboard/mouse protocol handler initialized <6>[ 12.451650] IR NEC protocol handler initialized <6>[ 12.456209] IR RC5(x/sz) protocol handler initialized <6>[ 12.461293] IR RC6 protocol handler initialized <6>[ 12.466529] IR SANYO protocol handler initialized <6>[ 12.471933] IR Sharp protocol handler initialized <6>[ 12.477317] IR Sony protocol handler initialized <6>[ 12.482618] IR XMP protocol handler initialized <6>[ 12.489617] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 12.498739] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 12.507982] device-mapper: uevent: version 1.0.3 <6>[ 12.513739] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 12.522881] intel_pstate: Intel P-state driver initializing <6>[ 12.542475] intel_pstate: HWP enabled <6>[ 12.548409] sdhci: Secure Digital Host Controller Interface driver <6>[ 12.556247] sdhci: Copyright(c) Pierre Ossman <6>[ 12.571788] pstore: Registered efi_pstore as persistent store backend <6>[ 12.580052] hid: raw HID events driver (C) Jiri Kosina <6>[ 12.588221] usbcore: registered new interface driver usbhid <6>[ 12.595350] usbhid: USB HID core driver <6>[ 12.601640] pci 0000:00:08.0: Setting to D3hot <6>[ 12.619791] pci 0000:00:05.0: Setting to D3hot <6>[ 12.627717] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 12.639929] pci 0000:00:0b.0: Setting to D3hot <6>[ 12.653334] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 12.661888] pci 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 12.664811] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <4>[ 12.671237] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 12.677746] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 12.686918] intel_pmc_core INT33A1:00: initialized <6>[ 12.690856] usb 4-1: Manufacturer: Realtek <6>[ 12.697324] intel_rapl_msr: PL4 support detected. <6>[ 12.699962] usb 4-1: SerialNumber: 000001 <6>[ 12.705813] intel_rapl_common: Found RAPL domain package <6>[ 12.758968] intel_rapl_common: Found RAPL domain core <6>[ 12.768905] intel_rapl_common: Found RAPL domain uncore <6>[ 12.778985] intel_rapl_common: Found RAPL domain psys <6>[ 12.799666] Initializing XFRM netlink socket <6>[ 12.809887] NET: Registered PF_INET6 protocol family <6>[ 12.827297] Segment Routing with IPv6 <6>[ 12.835887] In-situ OAM (IOAM) with IPv6 <6>[ 12.844710] mip6: Mobile IPv6 <6>[ 12.852264] NET: Registered PF_PACKET protocol family <6>[ 12.862139] NET: Registered PF_KEY protocol family <6>[ 12.918460] IPI shorthand broadcast: enabled <6>[ 12.927468] AVX2 version of gcm_enc/dec engaged. <6>[ 12.937173] AES CTR mode by8 optimization enabled <6>[ 13.029314] sched_clock: Marking stable (11402015639, 1626591547)->(13414093597, -385486411) <6>[ 13.044147] registered taskstats version 1 <6>[ 13.157863] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 13.192145] Btrfs loaded, zoned=no, fsverity=no <6>[ 13.201733] pstore: Using crash dump compression: deflate <6>[ 13.229325] clk: Disabling unused clocks <6>[ 13.238281] ALSA device list: <6>[ 13.246188] No soundcards found. <6>[ 13.256557] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 13.945063] EXT4-fs (nvme0n1p2): mounted filesystem 347bc2b8-1faf-440f-b59b-c72a12954334 ro with ordered data mode. Quota mode: disabled. <6>[ 13.962972] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 13.977935] devtmpfs: mounted <6>[ 13.988948] Freeing unused kernel image (initmem) memory: 2568K <6>[ 13.999835] Write protecting the kernel read-only data: 22528k <6>[ 14.012214] Freeing unused kernel image (rodata/data gap) memory: 700K <6>[ 14.023425] Run /sbin/init as init process <7>[ 14.032128] with arguments: <7>[ 14.032140] /sbin/init <7>[ 14.032151] 3 <7>[ 14.032160] with environment: <7>[ 14.032169] HOME=/ <7>[ 14.032179] TERM=linux <7>[ 14.032188] BOOT_IMAGE=/boot/drm_intel <7>[ 14.321252] systemd[1]: System time before build time, advancing clock. <7>[ 14.661173] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 14.693438] systemd[1]: Detected architecture x86-64. <7>[ 14.737026] systemd[1]: Set hostname to . <6>[ 14.960574] cat (186) used greatest stack depth: 13296 bytes left <6>[ 14.972200] friendly-recove (183) used greatest stack depth: 12952 bytes left <6>[ 14.982709] mkdir (189) used greatest stack depth: 12568 bytes left <6>[ 15.032653] ls (192) used greatest stack depth: 12168 bytes left <7>[ 15.935798] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 15.953902] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 15.979191] systemd[1]: Created slice system-modprobe.slice. <7>[ 16.003885] systemd[1]: Created slice system-serial\x2dgetty.slice. <7>[ 16.028970] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 16.053695] systemd[1]: Created slice User and Session Slice. <7>[ 16.075407] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 16.099258] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 16.116397] systemd[1]: Reached target Remote File Systems. <7>[ 16.135995] systemd[1]: Reached target Slices. <7>[ 16.155710] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 16.183528] systemd[1]: Listening on Syslog Socket. <7>[ 16.203700] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 16.227011] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 16.288172] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 16.303681] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 16.326258] systemd[1]: Listening on Journal Socket. <7>[ 16.346031] systemd[1]: Listening on udev Control Socket. <7>[ 16.367199] systemd[1]: Listening on udev Kernel Socket. <7>[ 16.419357] systemd[1]: Mounting Huge Pages File System... <7>[ 16.477054] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 16.532741] systemd[1]: Mounting Kernel Debug File System... <7>[ 16.589421] systemd[1]: Mounting Kernel Trace File System... <7>[ 16.652003] systemd[1]: Starting Journal Service... <7>[ 16.695732] systemd[1]: Starting Set the console keyboard layout... <7>[ 16.742000] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 16.770551] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 16.790105] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 16.848828] systemd[1]: Starting File System Check on Root Device... <7>[ 16.897561] systemd[1]: Starting Load Kernel Modules... <7>[ 16.944484] systemd[1]: Starting udev Coldplug all Devices... <7>[ 16.969691] systemd[1]: Starting Uncomplicated firewall... <7>[ 16.990950] systemd[1]: Started Journal Service. <6>[ 17.903531] EXT4-fs (nvme0n1p2): re-mounted 347bc2b8-1faf-440f-b59b-c72a12954334 r/w. Quota mode: disabled. <6>[ 18.032578] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 18.114213] systemd-journald[211]: Received client request to flush runtime journal. <5>[ 18.128992] systemd-journald[211]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 19.552617] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 19.588056] pps_core: LinuxPPS API ver. 1 registered <6>[ 19.588073] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 19.618545] PTP clock support registered <6>[ 19.623388] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 19.623657] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 20.175162] i2c i2c-0: 8/8 memory slots populated (from DMI) <4>[ 20.175201] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD <6>[ 20.196569] usbcore: registered new device driver r8152-cfgselector <6>[ 20.216135] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 20.216150] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 20.222851] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 20.256949] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 20.257295] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 20.337716] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 20.351310] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 20.421215] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 20.429022] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 20.455074] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 20.455435] usbcore: registered new interface driver r8152 <6>[ 20.468472] usbcore: registered new interface driver cdc_ether <6>[ 20.475151] usbcore: registered new interface driver r8153_ecm <6>[ 20.499024] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 20.499208] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection <6>[ 20.499350] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 20.536704] e1000e 0000:00:1f.6 eno0: renamed from eth1 <6>[ 20.744035] r8152 4-1:1.0 enxe2015072f451: renamed from eth0 <6>[ 20.861779] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <4>[ 21.033152] ********************************************************** <4>[ 21.033159] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 21.033165] ** ** <4>[ 21.033170] ** trace_printk() being used. Allocating extra memory. ** <4>[ 21.033176] ** ** <4>[ 21.033181] ** This means that this is a DEBUG kernel and it is ** <4>[ 21.033187] ** unsafe for production use. ** <4>[ 21.033192] ** ** <4>[ 21.033197] ** If you see this message and you are not debugging ** <4>[ 21.033203] ** the kernel, report this immediately to your vendor! ** <4>[ 21.033208] ** ** <4>[ 21.033214] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 21.033220] ********************************************************** <6>[ 21.220244] i915 0000:00:02.0: Force probing unsupported Device ID 7d55, tainting kernel <7>[ 21.223994] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 21.224770] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <6>[ 21.225411] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - HuC is not supported! <7>[ 21.225474] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 21.226070] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 21.226768] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 21.227358] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 21.228064] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 21.229087] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 21.229697] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 21.231022] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0000, instances: 0000 <7>[ 21.231498] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0000, instances: 0000 <7>[ 21.233969] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7>[ 21.234432] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <5>[ 21.234803] i915 0000:00:02.0: [drm] No GSC FW selected, disabling GSC CS and media C6 <7>[ 21.236541] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 21.237113] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 21.237503] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 21.237882] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 21.241507] Console: switching to colour dummy device 80x25 <6>[ 21.250932] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 21.251750] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 21.251802] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000080400947 <7>[ 21.252684] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 61440K <7>[ 21.253590] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 21.254384] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 21.256507] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6fe08018 <7>[ 21.257582] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 21.258415] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 21.259171] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 21.259857] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 21.260533] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 21.261258] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 21.262011] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 21.262495] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 21.262970] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2133 tRP=40 tRDPRE=32 tRAS=96 tRCD=40 tRC=136 <7>[ 21.263591] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 21.264183] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <6>[ 21.264458] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <7>[ 21.264755] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=22338 peakbw: 34128 <7>[ 21.265320] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 21.265870] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 21.266388] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=25866 peakbw: 34128 <7>[ 21.266933] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 21.267436] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 21.267946] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=28082 peakbw: 34128 <7>[ 21.268454] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 21.268976] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 21.269494] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29340 peakbw: 34128 <7>[ 21.270044] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 21.270576] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 21.271131] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=30012 peakbw: 34128 <7>[ 21.271649] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 21.272134] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 21.272637] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=30359 peakbw: 34128 <7>[ 21.273116] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 21.273625] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 21.275443] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 21.276184] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 252 <7>[ 21.276834] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 21.277356] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 21.277878] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 21.278378] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 21.278923] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 21.279428] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 21.279968] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 21.280491] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 21.281041] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 21.281571] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 21.282136] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7>[ 21.282693] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 21.283213] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 21.283748] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 21.284255] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 21.284778] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 252 not known; assuming 39 <7>[ 21.285270] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 21.285806] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 21.286334] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 21.286881] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 21.287391] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 21.287937] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 21.288476] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 21.289010] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 21.289520] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7>[ 21.290023] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 21.290495] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7>[ 21.290973] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 21.291445] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7>[ 21.291941] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 21.292412] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7>[ 21.292901] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 21.293399] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0 <7>[ 21.293945] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 21.294454] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0 <7>[ 21.294976] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 21.295562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 21.296336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 21.297041] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 21.297991] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 21.298777] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 21.299499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 21.300113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 21.300670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 21.301266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 21.301875] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 21.302012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 21.302680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 21.303201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 21.303722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 21.304449] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <6>[ 21.320157] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.13) <7>[ 21.321090] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 21.323218] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 21.323867] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 21.324378] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 72 (72.0 usec) <7>[ 21.324862] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 75 (75.0 usec) <7>[ 21.325303] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec) <7>[ 21.325745] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 140 (140.0 usec) <7>[ 21.326177] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec) <7>[ 21.395778] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 21.403853] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 21.407432] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 21.408152] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 21.408887] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7>[ 21.409509] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 21.410287] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 21.410930] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 21.411469] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 21.412018] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 21.412541] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 21.413072] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 21.413570] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 21.414085] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 21.414615] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 21.415256] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 21.415981] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 21.416494] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 21.416966] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 21.417391] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 21.417835] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 21.418433] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 21.419307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 21.425783] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 21.427845] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 21.431074] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 21.432903] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 21.436877] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 21.441542] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 21.447358] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 21.455778] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 21.456422] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] FEC CAPABILITY: 0 <7>[ 21.488414] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 21.488476] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 21.488489] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 21.488742] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 21.492443] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 21.497442] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 21.498327] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 21.499170] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 21.499875] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 21.500384] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 21.500858] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 21.501292] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 21.501726] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 21.502271] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 21.503775] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] using AUX B (VBT) <7>[ 21.504383] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 21.505708] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 21.506235] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 21.507096] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] using AUX D (VBT) <7>[ 21.508276] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 21.512394] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 21.516682] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] using AUX E (VBT) <7>[ 21.517713] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 21.518760] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 21.519360] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 21.519880] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 21.520571] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] using AUX F (VBT) <7>[ 21.522379] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 21.526982] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 21.538499] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] using AUX G (VBT) <7>[ 21.539296] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 21.540483] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 21.567647] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 21.569243] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 21.570092] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 21.570859] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 21.571365] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 21.571882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 21.572374] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 21.572878] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 21.573364] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 21.573873] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 21.574340] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 21.577146] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 21.583576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 21.585848] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 21.587994] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 21.589555] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 21.591494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 21.593082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 21.594379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 21.596036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 21.597498] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 21.599267] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 21.600706] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 21.602896] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 21.604120] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 21.605342] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 21.607776] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 21.609140] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 21.617218] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no, <7>[ 21.619425] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 21.621110] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 21.622741] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 21.624046] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 21.626426] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 21.628031] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 21.629157] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 21.631334] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 21.632676] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 21.637025] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 21.640080] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 21.642189] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 21.643546] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 21.645934] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 21.651400] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 21.653946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 21.657553] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 21.658343] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 21.659543] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 21.660136] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 21.660637] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 21.661101] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 21.661775] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 21.662317] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 21.663352] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 21.664502] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 21.666499] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 21.668286] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 21.669943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 21.671963] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 21.674296] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 21.675538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 21.677384] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 21.678115] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 21.678717] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 21.679260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 21.680333] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 21.681051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 21.681684] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 21.682265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 21.682880] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 21.683458] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 21.684057] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 21.685127] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 21.685743] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 21.686264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 21.688863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <6>[ 21.689441] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 21.689737] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 21.690325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 21.690886] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 21.691453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 21.691970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 21.692446] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 21.692934] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 21.693428] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 21.693922] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 21.694383] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 21.695027] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 21.695583] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 21.696144] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 21.696648] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 21.697097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 21.697536] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 21.698235] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 21.698854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 21.699356] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 21.701168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 21.703333] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 21.706103] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 21.708655] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 21.710545] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 21.717934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 21.718682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 21.719262] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 21.719846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 21.720373] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 21.720914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 21.721434] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 21.721964] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 21.722482] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 21.723173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 21.723790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 21.724310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 21.727410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.730562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.732000] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.734760] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.737215] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.740108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 21.743822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 21.751137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 21.752006] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 21.752585] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 21.753164] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 21.753735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 21.754253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 21.754792] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.755298] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.756017] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.756530] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.757055] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.757555] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.758068] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.758560] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.759072] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.759545] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.760045] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 21.760546] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 21.768187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 21.771247] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 21.771925] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 21.772432] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 21.772952] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 21.780105] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fc000000, pitch 11520, size 0x13c6800 <7>[ 21.780798] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 21.805100] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 21.847087] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 21.847772] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000] <7>[ 21.848204] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 21.848817] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 21.848828] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 21.848835] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 21.848874] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7>[ 21.861559] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 engine workarounds on rcs'0 <7>[ 21.862365] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on rcs'0 <7>[ 21.862952] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7>[ 21.866891] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7>[ 21.867521] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 2 context workarounds on bcs'0 <7>[ 21.869419] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on ccs'0 <7>[ 21.870047] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on ccs'0 <7>[ 21.874860] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 21.875576] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 21.876239] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 21.940378] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 21.941074] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7>[ 21.941638] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 21.942143] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 21.942645] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 21.943130] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 21.943638] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 21.944113] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 21.944574] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 21.945067] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 21.945540] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 21.946029] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 21.946493] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 21.946985] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 21.949062] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.8.0 <7>[ 21.961708] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 2200MHz, before = 2200MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 21.964265] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 21.967556] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 21.967579] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 21.968639] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 21.988790] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 21.988841] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7>[ 21.990467] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7>[ 21.991070] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'0 <7>[ 21.992529] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7>[ 21.993121] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'2 <7>[ 21.994653] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7>[ 21.995194] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vecs'0 <7>[ 21.999540] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 22.000268] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 22.000889] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <6>[ 22.049522] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <7>[ 22.064789] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 22.065457] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x200000 <7>[ 22.066081] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 22.066636] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 22.067121] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 22.067588] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 22.068105] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 22.068586] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 22.069104] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 22.069590] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 22.070105] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 22.070590] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 22.071090] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 22.071561] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 22.072063] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <6>[ 22.074337] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.8.0 <6>[ 22.074360] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.1 <7>[ 22.092526] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 15ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 22.093711] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 22.102496] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 22.103754] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 22.103768] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 22.104107] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 22.113107] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 22.114512] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 22.115294] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 22.116122] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 22.116801] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 22.117305] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 22.117791] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 22.118251] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 22.118715] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 22.119255] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 22.119781] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 22.120336] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 22.120899] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 22.121433] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 22.122060] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 22.122633] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 22.123261] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 22.123777] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 22.124242] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 22.124721] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.125175] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.125648] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.126086] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 22.126504] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.126963] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.127387] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.127834] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 22.128251] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.128713] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.129154] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.129633] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 22.130072] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.130493] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.130940] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.131353] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 22.131790] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.132206] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.132644] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.133079] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 22.133490] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.133946] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 22.134367] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 22.134955] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 22.134973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 22.135559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 22.136111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 22.136643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 22.137141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 22.137642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 22.138130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 22.138641] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 22.139120] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 22.139630] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 22.140123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 22.140636] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 22.140647] i915 0000:00:02.0: pixelformat: RGB <7>[ 22.140656] i915 0000:00:02.0: colorimetry: sRGB <7>[ 22.140666] i915 0000:00:02.0: bpc: 0 <7>[ 22.140675] i915 0000:00:02.0: dynamic range: VESA range <7>[ 22.140685] i915 0000:00:02.0: content type: Not defined <7>[ 22.140694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 22.141181] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 22.141697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.142197] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 22.142764] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 22.143277] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 22.143803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 22.144304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 22.144819] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 22.145303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 22.145807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 22.146294] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 22.146841] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 22.147346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 22.147851] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 22.148335] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.148857] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.149356] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.149877] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 22.150359] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 22.150863] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.151341] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.151832] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.152303] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 22.152795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 22.153259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 22.153748] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 22.154220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 22.154743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 22.155236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 22.157699] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7>[ 22.364878] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 22.366388] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 22.380193] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 22.380915] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 22.381494] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 22.432695] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 22.433677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 22.435408] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 22.436170] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 22.436751] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 22.437238] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 22.437726] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 22.438175] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 22.439047] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 22.439555] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 22.440053] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 22.440521] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 22.440999] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 22.441457] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 22.441954] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 22.442419] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 22.443111] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 22.443582] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 22.444053] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 22.444493] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 22.444953] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 22.445407] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 22.445877] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 22.446313] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 22.446781] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 22.447292] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 22.448070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 22.450090] i915 0000:00:02.0: [drm:intel_dp_128b132b_sdp_crc16 [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] DP2.0 SDP CRC16 for 128b/132b enabled <7>[ 22.450806] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 22.451347] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7>[ 23.052923] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 23.053780] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 23.054309] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 23.054884] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 23.256724] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 23.261070] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 23.262720] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 23.267738] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 23.268647] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 23.270348] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 23.272189] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 23.273075] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 23.275120] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 23.275528] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 23.278218] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 23.278777] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 23.279956] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 23.280946] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 23.281365] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 23.282070] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 23.292941] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 23.295037] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.296493] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 23.300719] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 23.301890] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 23.303695] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 23.304809] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 23.306002] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 23.307216] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 23.308404] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 23.309588] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 23.310772] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 23.311953] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 23.313166] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 23.314413] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 23.317175] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 23.320338] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 23.321789] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 23.323096] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 23.324273] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 23.325427] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 23.326794] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 23.331649] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7>[ 23.332667] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7>[ 23.333527] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7>[ 23.334490] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7>[ 23.335451] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7>[ 23.336349] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed ccs'0 to ccs0 <7>[ 23.370910] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 23.372999] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 23.378660] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 23.381044] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 23.385013] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 23.387110] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 23.390490] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 23.394250] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 23.396326] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 23.398364] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 23.402144] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 23.404260] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 23.407986] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 23.408251] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7>[ 23.423439] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 23.524688] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 23.549275] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <6>[ 23.561016] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7>[ 23.562086] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 23.563310] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 23.566039] [drm:drm_client_modeset_probe] <7>[ 23.565873] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 23.567746] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 23.567735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 23.567956] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.568844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 23.569741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 23.572522] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 23.573263] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x2) gen=12 <7>[ 23.573277] i915 device info: graphics version: 12.71 <7>[ 23.573286] i915 device info: media version: 13 <7>[ 23.573293] i915 device info: display version: 14 <7>[ 23.573301] i915 device info: graphics stepping: B0 <7>[ 23.573308] i915 device info: media stepping: C0 <7>[ 23.573314] i915 device info: display stepping: C0 <7>[ 23.573321] i915 device info: base die stepping: ** <7>[ 23.573327] i915 device info: gt: 0 <7>[ 23.573334] i915 device info: memory-regions: 0x41 <7>[ 23.573340] i915 device info: page-sizes: 0x211000 <7>[ 23.573348] i915 device info: platform: METEORLAKE <7>[ 23.573355] i915 device info: ppgtt-size: 48 <7>[ 23.573362] i915 device info: ppgtt-type: 2 <7>[ 23.573368] i915 device info: dma_mask_size: 46 <7>[ 23.573375] i915 device info: is_mobile: no <7>[ 23.573382] i915 device info: is_lp: no <7>[ 23.573393] i915 device info: require_force_probe: yes <7>[ 23.573404] i915 device info: is_dgfx: no <7>[ 23.573415] i915 device info: has_64bit_reloc: yes <7>[ 23.573423] i915 device info: has_64k_pages: no <7>[ 23.573430] i915 device info: gpu_reset_clobbers_display: no <7>[ 23.573437] i915 device info: has_reset_engine: yes <7>[ 23.573444] i915 device info: has_3d_pipeline: yes <7>[ 23.573451] i915 device info: has_4tile: yes <7>[ 23.573458] i915 device info: has_flat_ccs: no <7>[ 23.573464] i915 device info: has_global_mocs: yes <7>[ 23.573471] i915 device info: has_gmd_id: yes <7>[ 23.573478] i915 device info: has_gt_uc: yes <7>[ 23.573488] i915 device info: has_heci_pxp: no <7>[ 23.573498] i915 device info: has_heci_gscfi: no <7>[ 23.573508] i915 device info: has_guc_deprivilege: yes <7>[ 23.573518] i915 device info: has_l3_ccs_read: no <7>[ 23.573525] i915 device info: has_l3_dpf: no <7>[ 23.573532] i915 device info: has_llc: no <7>[ 23.573538] i915 device info: has_logical_ring_contexts: yes <7>[ 23.573545] i915 device info: has_logical_ring_elsq: yes <7>[ 23.573552] i915 device info: has_media_ratio_mode: no <7>[ 23.573558] i915 device info: has_mslice_steering: no <7>[ 23.573565] i915 device info: has_oa_bpc_reporting: yes <7>[ 23.573571] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 23.573578] i915 device info: has_oam: yes <7>[ 23.573584] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 23.573590] i915 device info: has_pxp: yes <7>[ 23.573629] i915 device info: has_rc6: yes <7>[ 23.573641] i915 device info: has_rc6p: no <7>[ 23.573651] i915 device info: has_rps: yes <7>[ 23.573658] i915 device info: has_runtime_pm: yes <7>[ 23.573665] i915 device info: has_snoop: yes <7>[ 23.573672] i915 device info: has_coherent_ggtt: no <7>[ 23.573679] i915 device info: tuning_thread_rr_after_dep: no <7>[ 23.573686] i915 device info: unfenced_needs_alignment: no <7>[ 23.573694] i915 device info: hws_needs_physical: no <7>[ 23.573701] i915 device info: has_pooled_eu: no <7>[ 23.573708] i915 device info: cursor_needs_physical: no <7>[ 23.573715] i915 device info: has_cdclk_crawl: yes <7>[ 23.573723] i915 device info: has_cdclk_squash: yes <7>[ 23.573730] i915 device info: has_ddi: yes <7>[ 23.573737] i915 device info: has_dp_mst: yes <7>[ 23.573744] i915 device info: has_dsb: yes <7>[ 23.573752] i915 device info: has_fpga_dbg: yes <7>[ 23.573759] i915 device info: has_gmch: no <7>[ 23.573766] i915 device info: has_hotplug: yes <7>[ 23.573773] i915 device info: has_hti: no <7>[ 23.573780] i915 device info: has_ipc: yes <7>[ 23.573786] i915 device info: has_overlay: no <7>[ 23.573794] i915 device info: has_psr: yes <7>[ 23.573801] i915 device info: has_psr_hw_tracking: no <7>[ 23.573808] i915 device info: overlay_needs_physical: no <7>[ 23.573816] i915 device info: supports_tv: no <7>[ 23.573823] i915 device info: has_hdcp: yes <7>[ 23.573831] i915 device info: has_dmc: yes <7>[ 23.573839] i915 device info: has_dsc: yes <7>[ 23.573845] i915 device info: rawclk rate: 38400 kHz <7>[ 23.573853] i915 device info: iommu: enabled <7>[ 23.573861] i915 device info: available engines: 400003 <7>[ 23.573869] i915 device info: subslice total: 8 <7>[ 23.573876] i915 device info: geometry dss mask=00000000,000000ff <7>[ 23.573886] i915 device info: compute dss mask=00000000,000000ff <7>[ 23.573893] i915 device info: EU total: 128 <7>[ 23.573900] i915 device info: EU per subslice: 16 <7>[ 23.573907] i915 device info: has slice power gating: no <7>[ 23.573913] i915 device info: has subslice power gating: no <7>[ 23.573920] i915 device info: has EU power gating: no <7>[ 23.573927] i915 device info: available engines: 41400 <7>[ 23.573934] i915 device info: subslice total: 8 <7>[ 23.573940] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 23.573948] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 23.573955] i915 device info: EU total: 128 <7>[ 23.573962] i915 device info: EU per subslice: 16 <7>[ 23.573551] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.573970] i915 device info: has slice power gating: no <7>[ 23.573974] i915 device info: has subslice power gating: no <7>[ 23.573978] i915 device info: has EU power gating: no <6>[ 23.573982] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 23.573987] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 23.573991] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 23.574318] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 23.575786] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 23.576368] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 23.576836] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 23.577264] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 23.577988] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 23.578016] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 23.578033] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 23.578137] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 23.578934] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 23.581178] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.581713] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 23.583223] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 23.584412] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 23.584465] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.584486] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 23.584526] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 23.586072] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 23.586194] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 23.586305] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.586384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.588877] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 23.588989] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 23.589086] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 23.589163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 23.593135] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 23.593242] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 23.593336] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.593418] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.594934] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 23.595059] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 23.595171] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 23.595262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 23.596693] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 23.596817] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 23.596935] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 23.597028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 23.598394] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 23.598517] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 23.598678] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 23.598709] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 23.598730] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 23.598748] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 23.598766] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 23.598784] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 23.598802] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 23.599489] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 23.599643] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 23.599665] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 23.599682] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 23.599698] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 23.599757] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 23.600070] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7>[ 23.600298] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 23.621334] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01a00000 <6>[ 23.625996] fbcon: i915drmfb (fb0) is primary device <7>[ 23.631859] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 23.633115] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 23.634162] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 23.635125] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 23.636079] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 23.636992] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 23.638085] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 23.639308] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7>[ 23.640313] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 23.641254] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 <7>[ 23.642183] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 <7>[ 23.643085] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 <7>[ 23.643998] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 23.645083] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 22338 required 2159 qgv_peak_bw: 34128 <7>[ 23.646115] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 23.647094] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 23.648059] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 34128 for required data rate: 2159 <7>[ 23.649097] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 23.650186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 23.651209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 23.652208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 23.653153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 23.654101] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 23.655055] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 23.656000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 23.656898] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 23.657775] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 23.658637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 23.659476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 23.660422] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 23.660434] i915 0000:00:02.0: pixelformat: RGB <7>[ 23.660444] i915 0000:00:02.0: colorimetry: sRGB <7>[ 23.660455] i915 0000:00:02.0: bpc: 0 <7>[ 23.660465] i915 0000:00:02.0: dynamic range: VESA range <7>[ 23.660474] i915 0000:00:02.0: content type: Not defined <7>[ 23.660483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 23.661406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.662299] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.663171] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 23.664104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 23.665226] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 23.666339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 23.667466] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 23.668656] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 23.669725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 23.670785] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 23.671832] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 23.673128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 23.674351] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 23.675526] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 23.676717] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.677818] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.678937] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.680065] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 23.681163] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 23.682256] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.683341] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.684419] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.685541] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 23.686661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 23.687719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 23.688769] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 23.689846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 23.690928] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 23.691985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 23.693032] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 23.694081] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 23.697769] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x1550071 0x13421c72) <7>[ 23.699809] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 23.701101] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 23.702326] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 23.703511] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 23.704732] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 23.705843] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 23.706944] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 23.707997] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 23.709061] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 23.710096] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 23.711136] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 23.712151] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 23.713182] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 23.714210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 23.715225] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 23.716213] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 23.717210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 23.718190] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 23.719202] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 23.720206] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 23.721213] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 23.722172] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 23.725352] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 23.730867] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.731410] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 23.734682] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 23.735919] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 23.737081] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 23.738168] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 23.739228] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 23.740256] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 23.741274] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 23.742244] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 23.743223] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 23.744202] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 23.745290] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <6>[ 23.750822] Console: switching to colour frame buffer device 360x112 <6>[ 23.781006] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 23.791015] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 23.791142] [drm:drm_client_modeset_probe] <7>[ 23.791879] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 23.791990] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.794895] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.795327] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 23.795763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 23.796761] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 23.797182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 23.797536] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 23.797932] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 23.798262] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 23.798928] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 23.798948] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 23.798962] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 23.799032] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 23.799359] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 23.800768] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.801257] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 23.802704] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 23.802785] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.802801] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 23.802848] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 23.803781] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 23.803821] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.803854] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.804397] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 23.804442] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 23.804482] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 23.805276] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 23.805312] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.805343] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.805822] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 23.805855] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 23.805885] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 23.806296] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 23.806327] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 23.806356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 23.806827] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 23.806875] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 23.806887] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 23.806894] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 23.806901] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 23.806908] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 23.806914] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 23.806921] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 23.807227] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 23.807291] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 23.807300] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 23.807307] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 23.807314] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 23.807414] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 23.825932] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 328 us, max time under evasion is 250 us <7>[ 23.836857] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 23.837092] [drm:drm_client_modeset_probe] <7>[ 23.837290] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 23.837362] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.839469] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.839943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 23.841306] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 23.841657] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 23.841980] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 23.842298] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 23.842720] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 23.842735] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 23.842745] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 23.842793] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 23.843171] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 23.844895] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.845245] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 23.846717] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 23.846753] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.846767] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 23.846803] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 23.847193] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 23.847230] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.847263] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.847738] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 23.847779] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 23.847817] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 23.848357] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 23.848404] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.848452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.849160] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 23.849219] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 23.849274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 23.850042] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 23.850114] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 23.850179] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 23.851077] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 23.851148] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 23.851162] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 23.851173] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 23.851182] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 23.851190] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 23.851199] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 23.851208] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 23.851354] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 23.851394] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 23.851403] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 23.851412] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 23.851420] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 23.851480] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 23.897495] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.898744] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.899441] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.900269] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.901236] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.902195] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.903063] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.903720] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.904406] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.905227] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.906177] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.907118] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.908012] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.908573] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.909424] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.910255] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.910997] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.911524] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.912302] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.913229] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.914100] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.914695] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.915505] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.916246] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.917004] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.917944] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.918885] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.919815] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.920388] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.921160] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.922092] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.923024] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.923768] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 23.924316] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 23.925059] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 23.925560] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <6>[ 23.943317] r8152 4-1:1.0 enxe2015072f451: carrier on <6>[ 23.960117] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 <6>[ 23.963729] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 <6>[ 23.967284] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 23.970067] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 24.007397] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 24.008029] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <7>[ 26.894360] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 26.895722] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 27.071934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 27.073709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 27.074868] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 27.075874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 28.110876] systemd-udevd (272) used greatest stack depth: 11304 bytes left <6>[ 28.111098] systemd-udevd (278) used greatest stack depth: 11200 bytes left <7>[ 29.677821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 29.680759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 29.686671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 29.688057] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 29.689262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4>[ 34.406710] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=668 'systemd' <5>[ 34.867459] systemd-journald[211]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 34.943365] systemd-journald[211]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 35.841228] fuse: init (API version 7.38)