<5>[ 0.000000] Linux version 6.5.0-linus-v6.5-g2dde18cd1d8f+ (kbuild@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.2) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Sun Aug 27 22:13:18 UTC 2023 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ca40fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006ca41000-0x000000006fdb8fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fdb9000-0x000000006fedffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006fee0000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fe15000 SMBIOS=0x6cb18000 MEMATTR=0x67f8e018 ESRT=0x67b9e198 TPMEventLog=0x67eac018 <6>[ 0.000000] efi: Remove mem282: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem284: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000010] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000013] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000019] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000020] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.000383] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved <7>[ 0.000385] e820: update [mem 0x87f800000-0x87fffffff] usable ==> reserved <6>[ 0.000388] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000389] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.000391] esrt: Reserving ESRT space from 0x0000000067b9e198 to 0x0000000067b9e310. <7>[ 0.000396] e820: update [mem 0x67b9e000-0x67b9efff] usable ==> reserved <6>[ 0.000413] Using GB pages for direct mapping <6>[ 0.001148] printk: log_buf_len: 1048576 bytes <6>[ 0.001150] printk: early log buf free: 259072(98%) <6>[ 0.001151] Secure boot disabled <6>[ 0.001152] ACPI: Early table checksum verification disabled <6>[ 0.001155] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.001158] ACPI: XSDT 0x000000006FF19228 000174 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001163] ACPI: FACP 0x000000006FFDE000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001167] ACPI: DSDT 0x000000006FF57000 083505 (v02 INTEL MTL 00000002 01000013) <6>[ 0.001169] ACPI: FACS 0x000000006FDFA000 000040 <6>[ 0.001171] ACPI: SSDT 0x000000006FFFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001174] ACPI: SSDT 0x000000006FFFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001176] ACPI: SSDT 0x000000006FFFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001178] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001180] ACPI: SSDT 0x000000006FFF7000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001183] ACPI: SSDT 0x000000006FFF5000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001185] ACPI: SSDT 0x000000006FFF3000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001187] ACPI: SSDT 0x000000006FFEF000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001189] ACPI: DTPR 0x000000006FFEE000 000098 (v01 00000000 00000000) <6>[ 0.001191] ACPI: SSDT 0x000000006FFED000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001193] ACPI: SSDT 0x000000006FFEA000 002447 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001196] ACPI: SSDT 0x000000006FFE0000 0096C5 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001198] ACPI: SSDT 0x000000006FFDF000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001200] ACPI: HPET 0x000000006FFDD000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001202] ACPI: APIC 0x000000006FFDC000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001204] ACPI: MCFG 0x000000006FFDB000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001206] ACPI: SSDT 0x000000006FF47000 00FD75 (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001208] ACPI: SSDT 0x000000006FF45000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001210] ACPI: SSDT 0x000000006FF41000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001213] ACPI: SSDT 0x000000006FF3B000 005331 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001215] ACPI: SSDT 0x000000006FFFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001217] ACPI: TPM2 0x000000006FF39000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001219] ACPI: LPIT 0x000000006FF38000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001221] ACPI: WSMT 0x000000006FF37000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001223] ACPI: SSDT 0x000000006FF36000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001225] ACPI: SSDT 0x000000006FF35000 00012A (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001227] ACPI: DBGP 0x000000006FF34000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001230] ACPI: DBG2 0x000000006FF33000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001232] ACPI: NHLT 0x000000006FF31000 001383 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001234] ACPI: SSDT 0x000000006FF2F000 001171 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001236] ACPI: SSDT 0x000000006FF29000 005CA6 (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001238] ACPI: ECDT 0x000000006FF28000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001240] ACPI: DMAR 0x000000006FF27000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001242] ACPI: FPDT 0x000000006FF26000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001245] ACPI: SSDT 0x000000006FF24000 001001 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001247] ACPI: SSDT 0x000000006FF21000 002534 (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001249] ACPI: SSDT 0x000000006FF1E000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001251] ACPI: SSDT 0x000000006FF1C000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001253] ACPI: ASF! 0x000000006FF1B000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001256] ACPI: PHAT 0x000000006FF1A000 000850 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001258] ACPI: BGRT 0x000000006FF3A000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001259] ACPI: Reserving FACP table memory at [mem 0x6ffde000-0x6ffde113] <6>[ 0.001260] ACPI: Reserving DSDT table memory at [mem 0x6ff57000-0x6ffda504] <6>[ 0.001261] ACPI: Reserving FACS table memory at [mem 0x6fdfa000-0x6fdfa03f] <6>[ 0.001262] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc38b] <6>[ 0.001262] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb70c] <6>[ 0.001263] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5e3] <6>[ 0.001264] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.001264] ACPI: Reserving SSDT table memory at [mem 0x6fff7000-0x6fff8bae] <6>[ 0.001265] ACPI: Reserving SSDT table memory at [mem 0x6fff5000-0x6fff661f] <6>[ 0.001265] ACPI: Reserving SSDT table memory at [mem 0x6fff3000-0x6fff4348] <6>[ 0.001266] ACPI: Reserving SSDT table memory at [mem 0x6ffef000-0x6fff2bc7] <6>[ 0.001267] ACPI: Reserving DTPR table memory at [mem 0x6ffee000-0x6ffee097] <6>[ 0.001267] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6ffedd02] <6>[ 0.001268] ACPI: Reserving SSDT table memory at [mem 0x6ffea000-0x6ffec446] <6>[ 0.001268] ACPI: Reserving SSDT table memory at [mem 0x6ffe0000-0x6ffe96c4] <6>[ 0.001269] ACPI: Reserving SSDT table memory at [mem 0x6ffdf000-0x6ffdf0f8] <6>[ 0.001270] ACPI: Reserving HPET table memory at [mem 0x6ffdd000-0x6ffdd037] <6>[ 0.001270] ACPI: Reserving APIC table memory at [mem 0x6ffdc000-0x6ffdc357] <6>[ 0.001271] ACPI: Reserving MCFG table memory at [mem 0x6ffdb000-0x6ffdb03b] <6>[ 0.001271] ACPI: Reserving SSDT table memory at [mem 0x6ff47000-0x6ff56d74] <6>[ 0.001272] ACPI: Reserving SSDT table memory at [mem 0x6ff45000-0x6ff4647e] <6>[ 0.001273] ACPI: Reserving SSDT table memory at [mem 0x6ff41000-0x6ff4489b] <6>[ 0.001273] ACPI: Reserving SSDT table memory at [mem 0x6ff3b000-0x6ff40330] <6>[ 0.001274] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffd60d] <6>[ 0.001275] ACPI: Reserving TPM2 table memory at [mem 0x6ff39000-0x6ff3904b] <6>[ 0.001275] ACPI: Reserving LPIT table memory at [mem 0x6ff38000-0x6ff380cb] <6>[ 0.001276] ACPI: Reserving WSMT table memory at [mem 0x6ff37000-0x6ff37027] <6>[ 0.001276] ACPI: Reserving SSDT table memory at [mem 0x6ff36000-0x6ff36ca5] <6>[ 0.001277] ACPI: Reserving SSDT table memory at [mem 0x6ff35000-0x6ff35129] <6>[ 0.001278] ACPI: Reserving DBGP table memory at [mem 0x6ff34000-0x6ff34033] <6>[ 0.001278] ACPI: Reserving DBG2 table memory at [mem 0x6ff33000-0x6ff33053] <6>[ 0.001279] ACPI: Reserving NHLT table memory at [mem 0x6ff31000-0x6ff32382] <6>[ 0.001279] ACPI: Reserving SSDT table memory at [mem 0x6ff2f000-0x6ff30170] <6>[ 0.001280] ACPI: Reserving SSDT table memory at [mem 0x6ff29000-0x6ff2eca5] <6>[ 0.001281] ACPI: Reserving ECDT table memory at [mem 0x6ff28000-0x6ff28068] <6>[ 0.001281] ACPI: Reserving DMAR table memory at [mem 0x6ff27000-0x6ff270a7] <6>[ 0.001282] ACPI: Reserving FPDT table memory at [mem 0x6ff26000-0x6ff26043] <6>[ 0.001282] ACPI: Reserving SSDT table memory at [mem 0x6ff24000-0x6ff25000] <6>[ 0.001283] ACPI: Reserving SSDT table memory at [mem 0x6ff21000-0x6ff23533] <6>[ 0.001284] ACPI: Reserving SSDT table memory at [mem 0x6ff1e000-0x6ff208d2] <6>[ 0.001284] ACPI: Reserving SSDT table memory at [mem 0x6ff1c000-0x6ff1d19f] <6>[ 0.001285] ACPI: Reserving ASF! table memory at [mem 0x6ff1b000-0x6ff1b073] <6>[ 0.001286] ACPI: Reserving PHAT table memory at [mem 0x6ff1a000-0x6ff1a84f] <6>[ 0.001286] ACPI: Reserving BGRT table memory at [mem 0x6ff3a000-0x6ff3a037] <6>[ 0.001298] Setting APIC routing to cluster x2apic. <6>[ 0.045508] Zone ranges: <6>[ 0.045511] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.045513] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.045514] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045515] Movable zone start for each node <6>[ 0.045516] Early memory node ranges <6>[ 0.045517] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.045518] node 0: [mem 0x0000000000100000-0x000000006ca40fff] <6>[ 0.045519] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.045520] node 0: [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045522] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.045527] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.045557] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.047979] On node 0, zone DMA32: 13758 pages in unavailable ranges <6>[ 0.090143] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.090530] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.090535] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.090580] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.090583] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.090584] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.090587] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.090588] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.090596] e820: update [mem 0x67fa7000-0x67fc1fff] usable ==> reserved <6>[ 0.090604] TSC deadline timer available <6>[ 0.090605] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.090613] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.090614] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.090615] PM: hibernation: Registered nosave memory: [mem 0x67b9e000-0x67b9efff] <6>[ 0.090616] PM: hibernation: Registered nosave memory: [mem 0x67fa7000-0x67fc1fff] <6>[ 0.090617] PM: hibernation: Registered nosave memory: [mem 0x6ca41000-0x6fdb8fff] <6>[ 0.090618] PM: hibernation: Registered nosave memory: [mem 0x6fdb9000-0x6fedffff] <6>[ 0.090618] PM: hibernation: Registered nosave memory: [mem 0x6fee0000-0x6fffefff] <6>[ 0.090619] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff] <6>[ 0.090620] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff] <6>[ 0.090620] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.090621] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.090623] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.090628] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.093773] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.095238] percpu: Embedded 72 pages/cpu s254752 r8192 d31968 u524288 <7>[ 0.095242] pcpu-alloc: s254752 r8192 d31968 u524288 alloc=1*2097152 <7>[ 0.095244] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.095249] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.095255] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.095267] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.095335] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.095366] random: crng init done <6>[ 0.098171] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.099549] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.099647] Built 1 zonelists, mobility grouping on. Total pages: 8177208 <6>[ 0.099650] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.099651] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.100367] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.100380] software IO TLB: area num 32. <6>[ 0.750565] Memory: 32435056K/33228672K available (16384K kernel code, 2618K rwdata, 5444K rodata, 2568K init, 21160K bss, 793360K reserved, 0K cma-reserved) <4>[ 0.750567] ********************************************************** <4>[ 0.750568] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.750569] ** ** <4>[ 0.750569] ** This system shows unhashed kernel memory addresses ** <4>[ 0.750570] ** via the console, logs, and other interfaces. This ** <4>[ 0.750570] ** might reduce the security of your system. ** <4>[ 0.750571] ** ** <4>[ 0.750571] ** If you see this message and you are not debugging ** <4>[ 0.750571] ** the kernel, report this immediately to your system ** <4>[ 0.750572] ** administrator! ** <4>[ 0.750572] ** ** <4>[ 0.750573] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.750573] ********************************************************** <6>[ 0.750747] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.751206] Dynamic Preempt: full <6>[ 0.751430] Running RCU self tests <6>[ 0.751430] Running RCU synchronous self tests <6>[ 0.751472] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.751473] rcu: RCU lockdep checking is enabled. <6>[ 0.751474] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.751475] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.751475] Trampoline variant of Tasks RCU enabled. <6>[ 0.751477] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.751477] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.751542] Running RCU synchronous self tests <6>[ 0.755422] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.755809] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.756138] Console: colour dummy device 80x25 <6>[ 0.756151] printk: console [tty1] enabled <6>[ 0.758096] printk: console [ttyS0] enabled <4>[ 2.228018] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 2.235690] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 2.239752] ... MAX_LOCK_DEPTH: 48 <4>[ 2.243899] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 2.248222] ... CLASSHASH_SIZE: 4096 <4>[ 2.252544] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 2.256948] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 2.261440] ... CHAINHASH_SIZE: 65536 <4>[ 2.265845] memory used by lock dependency info: 9461 kB <4>[ 2.271195] memory used for stack traces: 8320 kB <4>[ 2.275941] per task-struct memory footprint: 1920 bytes <6>[ 2.281304] ACPI: Core revision 20230331 <6>[ 2.286140] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns <6>[ 2.295253] APIC: Switch to symmetric I/O mode setup <6>[ 2.300235] DMAR: Host address width 42 <6>[ 2.304080] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 2.309413] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 2.318155] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 2.323474] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a04f0efde <6>[ 2.332212] DMAR: SATC flags: 0x1 <6>[ 2.335548] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 2.341888] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 2.347280] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 2.357629] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 2.367650] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 2.378168] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 2.388593] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 2.389652] CPU0: Thermal monitoring enabled (TM1) <6>[ 2.390592] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 2.391779] process: using mwait in idle threads <6>[ 2.392595] CET detected: Indirect Branch Tracking enabled <6>[ 2.393592] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 2.394591] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 2.395595] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 2.396596] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 2.397592] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 2.398596] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 2.399595] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 2.400606] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 2.401595] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 2.402592] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 2.403592] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 2.404595] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 2.405592] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 2.406592] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. <6>[ 2.419190] Freeing SMP alternatives memory: 36K <6>[ 2.419594] pid_max: default: 32768 minimum: 301 <6>[ 2.428970] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.429660] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.432014] Running RCU synchronous self tests <6>[ 2.432592] Running RCU synchronous self tests <6>[ 2.433755] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1002H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 2.435027] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 2.435625] Running RCU-tasks wait API self tests <6>[ 2.544605] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 2.545710] core: cpu_core PMU driver: <6>[ 2.546592] ... version: 5 <6>[ 2.547591] ... bit width: 48 <6>[ 2.550593] ... generic registers: 8 <6>[ 2.551591] ... value mask: 0000ffffffffffff <6>[ 2.552607] ... max period: 00007fffffffffff <6>[ 2.553593] ... fixed-purpose events: 4 <6>[ 2.554591] ... event mask: 0000000f000000ff <6>[ 2.555649] signal: max sigframe size: 3632 <6>[ 2.556608] Estimated ratio of average max frequency by base frequency (times 1024): 1505 <6>[ 2.557663] rcu: Hierarchical SRCU implementation. <6>[ 2.558591] rcu: Max phase no-delay instances is 400. <6>[ 2.561570] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 2.562140] smp: Bringing up secondary CPUs ... <6>[ 2.562878] smpboot: x86: Booting SMP configuration: <6>[ 2.563602] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 1.613638] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 1.613638] ... version: 5 <6>[ 1.613638] ... bit width: 48 <6>[ 1.613638] ... generic registers: 8 <6>[ 1.613638] ... value mask: 0000ffffffffffff <6>[ 1.613638] ... max period: 00007fffffffffff <6>[ 1.613638] ... fixed-purpose events: 3 <6>[ 1.613638] ... event mask: 00000007000000ff <4>[ 2.619868] #1 #3 #5 #7 #9 #11 <6>[ 2.624665] smp: Brought up 1 node, 22 CPUs <6>[ 2.626598] smpboot: Max logical packages: 1 <6>[ 2.627591] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 2.633763] devtmpfs: initialized <6>[ 2.635612] ACPI: PM: Registering ACPI NVS region [mem 0x6fdb9000-0x6fedffff] (1208320 bytes) <6>[ 2.637017] Running RCU synchronous self tests <6>[ 2.637606] Running RCU synchronous self tests <6>[ 2.638657] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 2.639604] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 2.640867] pinctrl core: initialized pinctrl subsystem <6>[ 2.642020] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 2.643722] thermal_sys: Registered thermal governor 'fair_share' <6>[ 2.643724] thermal_sys: Registered thermal governor 'step_wise' <6>[ 2.644593] thermal_sys: Registered thermal governor 'user_space' <6>[ 2.645648] cpuidle: using governor menu <6>[ 2.647667] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 2.648830] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 2.649605] PCI: not using MMCONFIG <6>[ 2.650600] PCI: Using configuration type 1 for base access <4>[ 2.652919] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 2.654667] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 2.655671] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.656602] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.657598] Callback from call_rcu_tasks() invoked. <6>[ 2.657765] cryptd: max_cpu_qlen set to 1000 <6>[ 2.676585] raid6: avx2x4 gen() 55779 MB/s <6>[ 2.694585] raid6: avx2x2 gen() 56274 MB/s <6>[ 2.712585] raid6: avx2x1 gen() 55294 MB/s <6>[ 2.713590] raid6: using algorithm avx2x2 gen() 56274 MB/s <6>[ 2.731585] raid6: .... xor() 38882 MB/s, rmw enabled <6>[ 2.732592] raid6: using avx2x2 recovery algorithm <6>[ 2.733872] ACPI: Added _OSI(Module Device) <6>[ 2.734591] ACPI: Added _OSI(Processor Device) <6>[ 2.735591] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 2.736592] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 3.110576] ACPI: 26 ACPI AML tables successfully acquired and loaded <6>[ 3.121099] ACPI: EC: EC started <6>[ 3.121585] ACPI: EC: interrupt blocked <6>[ 3.126721] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.127592] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 3.392564] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked <6>[ 4.970931] ACPI: Interpreter enabled <6>[ 4.974708] ACPI: PM: (supports S0 S4 S5) <6>[ 4.978595] ACPI: Using IOAPIC for interrupt routing <6>[ 4.983737] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 5.022597] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource <6>[ 5.031611] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 5.040598] PCI: Ignoring E820 reservations for host bridge windows <6>[ 5.070728] ACPI: Enabled 9 GPEs in block 00 to 7F <6>[ 5.071584] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 5.123488] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 5.247298] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 5.258696] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 5.280802] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 5.292204] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 5.310019] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 5.320955] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 5.332572] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 5.343212] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 5.410084] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 5.415874] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 5.420875] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 5.717433] ACPI: \_TZ_.FN00: New power resource <6>[ 5.723123] ACPI: \_TZ_.FN01: New power resource <6>[ 5.728109] ACPI: \_TZ_.FN02: New power resource <6>[ 5.733103] ACPI: \_TZ_.FN03: New power resource <6>[ 5.738090] ACPI: \_TZ_.FN04: New power resource <6>[ 5.746200] ACPI: \PIN_: New power resource <6>[ 5.752950] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 5.758604] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 5.770812] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 5.782878] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 5.798916] PCI host bridge to bus 0000:00 <6>[ 5.803595] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 5.809602] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 5.816597] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 5.824598] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 5.831597] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 5.839599] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 5.853220] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 <6>[ 5.860103] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 <6>[ 5.865608] pci 0000:00:02.0: reg 0x10: [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 5.873607] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 5.880639] pci 0000:00:02.0: BAR 2: assigned to efifb <6>[ 5.885597] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 5.893643] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 5.900699] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 <6>[ 5.906610] pci 0000:00:04.0: reg 0x10: [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 5.914719] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 <6>[ 5.920603] pci 0000:00:05.0: reg 0x10: [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 5.927613] pci 0000:00:05.0: enabling Extended Tags <6>[ 5.933338] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 <6>[ 5.939728] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 5.949632] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 <6>[ 5.955822] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 5.965263] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 <6>[ 5.971817] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 5.981191] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 <6>[ 5.986612] pci 0000:00:08.0: reg 0x10: [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 5.993981] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 <6>[ 6.000603] pci 0000:00:0a.0: reg 0x10: [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 6.007617] pci 0000:00:0a.0: enabling Extended Tags <6>[ 6.012786] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 <6>[ 6.018606] pci 0000:00:0b.0: reg 0x10: [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 6.025609] pci 0000:00:0b.0: reg 0x20: [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 6.032972] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 <6>[ 6.038612] pci 0000:00:0d.0: reg 0x10: [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 6.045671] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 6.053051] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 <6>[ 6.058611] pci 0000:00:0d.3: reg 0x10: [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 6.066607] pci 0000:00:0d.3: reg 0x18: [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 6.073658] pci 0000:00:0d.3: supports D1 D2 <6>[ 6.077592] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 6.084754] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 <6>[ 6.090608] pci 0000:00:12.0: reg 0x10: [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 6.098658] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 6.105860] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 <6>[ 6.111610] pci 0000:00:14.0: reg 0x10: [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 6.118683] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 6.126350] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 <6>[ 6.132612] pci 0000:00:14.2: reg 0x10: [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 6.139609] pci 0000:00:14.2: reg 0x18: [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 6.146899] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 <6>[ 6.152644] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.160920] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 <6>[ 6.166644] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.174894] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 <6>[ 6.180644] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.188879] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 <6>[ 6.194645] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.202845] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 <6>[ 6.208617] pci 0000:00:16.0: reg 0x10: [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 6.215691] pci 0000:00:16.0: PME# supported from D3hot <6>[ 6.222691] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 <6>[ 6.228606] pci 0000:00:16.3: reg 0x10: [io 0x3020-0x3027] <6>[ 6.234598] pci 0000:00:16.3: reg 0x14: [mem 0x8e121000-0x8e121fff] <6>[ 6.240902] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 <6>[ 6.246643] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.254149] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 <6>[ 6.259642] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.267853] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 <6>[ 6.274847] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 <6>[ 6.280638] pci 0000:00:1f.3: reg 0x10: [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 6.287652] pci 0000:00:1f.3: reg 0x20: [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 6.295713] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 6.300957] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 <6>[ 6.307615] pci 0000:00:1f.4: reg 0x10: [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 6.314621] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] <6>[ 6.320637] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 <6>[ 6.326630] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] <6>[ 6.332891] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 <6>[ 6.339621] pci 0000:00:1f.6: reg 0x10: [mem 0x8e100000-0x8e11ffff] <6>[ 6.345747] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 6.352757] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 <6>[ 6.358647] pci 0000:01:00.0: reg 0x10: [mem 0x8e000000-0x8e003fff 64bit] <6>[ 6.366393] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 6.371599] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 6.377733] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 6.383618] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 6.389618] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 6.397725] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 6.403616] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 6.409621] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <7>[ 6.417627] pci_bus 0000:00: on NUMA node 0 <6>[ 9.323473] Low-power S0 idle used by default for system suspend <6>[ 9.706670] ACPI: EC: interrupt unblocked <6>[ 9.710585] ACPI: EC: event unblocked <6>[ 9.714585] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 9.719724] ACPI: EC: GPE=0x6e <6>[ 9.722723] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 9.729722] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 9.737641] iommu: Default domain type: Passthrough (set via kernel command line) <5>[ 9.745175] SCSI subsystem initialized <7>[ 9.749778] libata version 3.00 loaded. <6>[ 9.749778] ACPI: bus type USB registered <6>[ 9.753645] usbcore: registered new interface driver usbfs <6>[ 9.758621] usbcore: registered new interface driver hub <6>[ 9.764638] usbcore: registered new device driver usb <6>[ 9.769799] efivars: Registered efivars operations <6>[ 9.774697] Advanced Linux Sound Architecture Driver Initialized. <6>[ 9.781123] PCI: Using ACPI for IRQ routing <7>[ 9.803272] PCI: pci_cache_line_size set to 64 bytes <6>[ 9.803421] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window <7>[ 9.812752] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 9.812762] e820: reserve RAM buffer [mem 0x67b9e000-0x67ffffff] <7>[ 9.812765] e820: reserve RAM buffer [mem 0x67fa7000-0x67ffffff] <7>[ 9.812768] e820: reserve RAM buffer [mem 0x6ca41000-0x6fffffff] <7>[ 9.812770] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 9.812863] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 9.813584] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 9.813584] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 9.832597] vgaarb: loaded <6>[ 9.835751] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 <6>[ 9.841595] hpet0: 8 comparators, 64-bit 19.200000 MHz counter <6>[ 9.849713] clocksource: Switched to clocksource tsc-early <6>[ 9.855737] pnp: PnP ACPI init <6>[ 9.859564] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 9.865447] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 9.871841] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 9.878971] system 00:03: [io 0x06a4] has been reserved <6>[ 9.884249] system 00:03: [io 0x06a0] has been reserved <6>[ 9.907925] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 9.914492] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 9.921395] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 9.928302] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 9.934867] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 9.941768] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 9.948674] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 9.955583] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 9.966664] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 9.973608] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 9.983696] pnp: PnP ACPI: found 8 devices <6>[ 9.997857] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 10.006860] NET: Registered PF_INET protocol family <6>[ 10.011984] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 10.021558] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 10.030506] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 10.038196] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 10.046422] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 10.056540] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 10.063404] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 10.070931] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 10.078885] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 10.084537] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 10.092900] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 10.101279] pci 0000:00:07.0: BAR 7: assigned [io 0x4000-0x4fff] <6>[ 10.107323] pci 0000:00:07.3: BAR 7: assigned [io 0x5000-0x5fff] <6>[ 10.113362] pci 0000:00:15.0: BAR 0: assigned [mem 0x501a2d9000-0x501a2d9fff 64bit] <6>[ 10.120988] pci 0000:00:15.1: BAR 0: assigned [mem 0x501a2da000-0x501a2dafff 64bit] <6>[ 10.128630] pci 0000:00:15.2: BAR 0: assigned [mem 0x501a2dc000-0x501a2dcfff 64bit] <6>[ 10.136254] pci 0000:00:15.3: BAR 0: assigned [mem 0x501a2dd000-0x501a2ddfff 64bit] <6>[ 10.143878] pci 0000:00:19.0: BAR 0: assigned [mem 0x501a2de000-0x501a2defff 64bit] <6>[ 10.151506] pci 0000:00:19.1: BAR 0: assigned [mem 0x501a2df000-0x501a2dffff 64bit] <6>[ 10.159125] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff] <6>[ 10.165873] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 10.170798] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 10.177534] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 10.182737] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 10.188798] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 10.195542] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 10.203578] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 10.208777] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 10.214840] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 10.221585] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 10.229625] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 10.235754] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 10.241881] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 10.248696] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 10.255507] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 10.262744] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x8e0fffff] <6>[ 10.268953] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 10.274473] pci_bus 0000:02: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 10.280684] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 10.288180] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 10.293705] pci_bus 0000:2c: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 10.299913] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 10.308396] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 10.315602] PCI: CLS 0 bytes, default 64 <6>[ 10.319580] DMAR: No RMRR found <6>[ 10.322720] DMAR: No ATSR found <6>[ 10.325847] DMAR: IOMMU feature nest inconsistent <6>[ 10.325850] DMAR: IOMMU feature sc_support inconsistent <6>[ 10.330520] DMAR: dmar0: Using Queued invalidation <6>[ 10.340480] DMAR: dmar1: Using Queued invalidation <6>[ 10.346183] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 10.351539] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 10.356601] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 10.361671] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 10.366753] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 10.371828] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 10.376900] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 10.381956] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 10.387018] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 10.392078] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 10.397160] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 10.402295] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 10.407452] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 10.412619] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 10.417752] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 10.422944] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 10.428075] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 10.433208] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 10.438338] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 10.443502] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 10.448820] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 10.453991] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 10.459276] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 10.464481] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 10.469625] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 10.474773] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 10.479917] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 10.485057] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 10.490202] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 10.496134] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 10.502523] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 10.508906] software IO TLB: mapped [mem 0x00000000635c1000-0x00000000675c1000] (64MB) <6>[ 10.517081] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 10.524927] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 10.530625] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 10.536239] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 10.541851] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 10.549110] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 10.559066] clocksource: Switched to clocksource tsc <6>[ 10.564071] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 10.581993] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 10.590566] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 10.598222] NET: Registered PF_ALG protocol family <6>[ 10.602994] xor: automatically using best checksumming function avx <6>[ 10.610018] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 10.617351] io scheduler mq-deadline registered <6>[ 10.621855] io scheduler kyber registered <6>[ 10.627222] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 10.634021] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 10.639927] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 10.654750] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 10.660642] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 10.674601] efifb: probing for efifb <6>[ 10.678181] efifb: framebuffer at 0x4000800000, using 20252k, total 20250k <6>[ 10.684993] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 10.691121] efifb: scrolling: redraw <6>[ 10.694672] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 10.704242] Console: switching to colour frame buffer device 360x112 <6>[ 10.714549] fb0: EFI VGA frame buffer device <6>[ 10.719457] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 10.724321] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 10.735736] ACPI: button: Lid Switch [LID0] <6>[ 10.740067] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 10.748453] ACPI: button: Sleep Button [SLPB] <6>[ 10.752908] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 10.761716] ACPI: button: Power Button [PWRB] <6>[ 10.828601] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 10.834247] ACPI: thermal: Thermal Zone [TZ00] (38 C) <6>[ 10.839802] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 10.840606] ACPI: battery: Slot [BAT0] (battery present) <6>[ 10.851437] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 10.851803] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 10.865259] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 10.872515] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 10.879589] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <6>[ 10.888442] Non-volatile memory driver v1.3 <6>[ 10.892722] Linux agpgart interface v0.103 <4>[ 10.922586] tpm_crb: probe of INTC7001:00 failed with error 378 <6>[ 10.928560] ACPI: bus type drm_connector registered <6>[ 10.943214] loop: module loaded <6>[ 10.947029] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 10.947590] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 10.953693] nvme nvme0: pci function 0000:01:00.0 <6>[ 10.958663] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 10.971832] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 10.981547] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 10.986747] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 10.992929] nvme nvme0: allocated 64 MiB host memory buffer. <6>[ 10.994074] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 11.006894] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 11.015112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.022279] usb usb1: Product: xHCI Host Controller <6>[ 11.027129] usb usb1: Manufacturer: Linux 6.5.0-linus-v6.5-g2dde18cd1d8f+ xhci-hcd <6>[ 11.034648] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 11.039781] hub 1-0:1.0: USB hub found <6>[ 11.043584] hub 1-0:1.0: 1 port detected <6>[ 11.045692] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 11.049741] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 11.058470] nvme0n1: p1 p2 <6>[ 11.060834] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.060836] usb usb2: Product: xHCI Host Controller <6>[ 11.075908] usb usb2: Manufacturer: Linux 6.5.0-linus-v6.5-g2dde18cd1d8f+ xhci-hcd <6>[ 11.083541] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 11.088504] hub 2-0:1.0: USB hub found <6>[ 11.092348] hub 2-0:1.0: 4 ports detected <6>[ 11.113360] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 11.118572] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 11.127031] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 11.136675] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 11.141883] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 11.149231] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 11.156334] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 11.164541] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.171716] usb usb3: Product: xHCI Host Controller <6>[ 11.176566] usb usb3: Manufacturer: Linux 6.5.0-linus-v6.5-g2dde18cd1d8f+ xhci-hcd <6>[ 11.184082] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 11.189067] hub 3-0:1.0: USB hub found <6>[ 11.192833] hub 3-0:1.0: 12 ports detected <6>[ 11.217818] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 11.226023] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.233192] usb usb4: Product: xHCI Host Controller <6>[ 11.238226] usb usb4: Manufacturer: Linux 6.5.0-linus-v6.5-g2dde18cd1d8f+ xhci-hcd <6>[ 11.245942] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 11.250886] hub 4-0:1.0: USB hub found <6>[ 11.254685] hub 4-0:1.0: 2 ports detected <6>[ 11.261744] usbcore: registered new interface driver usb-storage <6>[ 11.267970] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 11.274925] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 11.986650] i8042: Can't read CTR while initializing i8042 <4>[ 11.992108] i8042: probe of i8042 failed with error -5 <6>[ 11.997355] mousedev: PS/2 mouse device common for all mice <6>[ 12.003324] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 12.009295] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 12.014123] rtc_cmos rtc_cmos: setting system clock to 1998-02-26T21:07:32 UTC (888527252) <6>[ 12.022407] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 12.029379] IR JVC protocol handler initialized <6>[ 12.033884] IR MCE Keyboard/mouse protocol handler initialized <6>[ 12.039682] IR NEC protocol handler initialized <6>[ 12.044189] IR RC5(x/sz) protocol handler initialized <6>[ 12.049207] IR RC6 protocol handler initialized <6>[ 12.054594] IR SANYO protocol handler initialized <6>[ 12.060171] IR Sharp protocol handler initialized <6>[ 12.065721] IR Sony protocol handler initialized <6>[ 12.071197] IR XMP protocol handler initialized <6>[ 12.077654] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 12.086901] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 12.095131] device-mapper: uevent: version 1.0.3 <6>[ 12.100756] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 12.109974] intel_pstate: Intel P-state driver initializing <6>[ 12.120142] intel_pstate: HWP enabled <6>[ 12.125376] sdhci: Secure Digital Host Controller Interface driver <6>[ 12.133900] sdhci: Copyright(c) Pierre Ossman <6>[ 12.149391] pstore: Registered efi_pstore as persistent store backend <6>[ 12.158217] hid: raw HID events driver (C) Jiri Kosina <6>[ 12.166817] usbcore: registered new interface driver usbhid <6>[ 12.175214] usbhid: USB HID core driver <6>[ 12.181857] pci 0000:00:08.0: Setting to D3hot <6>[ 12.201233] pci 0000:00:05.0: Setting to D3hot <6>[ 12.209059] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 12.220709] pci 0000:00:0b.0: Setting to D3hot <6>[ 12.232991] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 12.240856] pci 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 12.241211] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <4>[ 12.247245] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 12.253962] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 12.262742] intel_pmc_core INT33A1:00: initialized <6>[ 12.266929] usb 4-1: Manufacturer: Realtek <6>[ 12.272907] intel_rapl_msr: PL4 support detected. <6>[ 12.275956] usb 4-1: SerialNumber: 000001 <6>[ 12.314841] intel_rapl_common: Found RAPL domain package <6>[ 12.323520] intel_rapl_common: Found RAPL domain core <6>[ 12.332033] intel_rapl_common: Found RAPL domain uncore <6>[ 12.340567] intel_rapl_common: Found RAPL domain psys <6>[ 12.357590] Initializing XFRM netlink socket <6>[ 12.368013] NET: Registered PF_INET6 protocol family <6>[ 12.381333] Segment Routing with IPv6 <6>[ 12.388985] In-situ OAM (IOAM) with IPv6 <6>[ 12.397780] mip6: Mobile IPv6 <6>[ 12.405269] NET: Registered PF_PACKET protocol family <6>[ 12.415065] NET: Registered PF_KEY protocol family <6>[ 12.470302] IPI shorthand broadcast: enabled <6>[ 12.479359] AVX2 version of gcm_enc/dec engaged. <6>[ 12.488997] AES CTR mode by8 optimization enabled <6>[ 12.579044] sched_clock: Marking stable (10966014223, 1612638067)->(13041577590, -462925300) <6>[ 12.593983] registered taskstats version 1 <6>[ 12.706755] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 12.740454] Btrfs loaded, zoned=no, fsverity=no <6>[ 12.750089] pstore: Using crash dump compression: deflate <6>[ 12.777967] clk: Disabling unused clocks <6>[ 12.778175] ALSA device list: <6>[ 12.794009] No soundcards found. <6>[ 12.804968] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 13.484529] EXT4-fs (nvme0n1p2): mounted filesystem fec10944-567b-487d-898f-2dff9231051e ro with ordered data mode. Quota mode: disabled. <6>[ 13.502060] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 13.517018] devtmpfs: mounted <6>[ 13.528164] Freeing unused kernel image (initmem) memory: 2568K <6>[ 13.539022] Write protecting the kernel read-only data: 22528k <6>[ 13.551346] Freeing unused kernel image (rodata/data gap) memory: 700K <6>[ 13.562581] Run /sbin/init as init process <7>[ 13.571244] with arguments: <7>[ 13.571265] /sbin/init <7>[ 13.571281] 3 <7>[ 13.571291] with environment: <7>[ 13.571300] HOME=/ <7>[ 13.571310] TERM=linux <7>[ 13.571320] BOOT_IMAGE=/boot/drm_intel <7>[ 13.857199] systemd[1]: System time before build time, advancing clock. <7>[ 14.193758] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 14.226391] systemd[1]: Detected architecture x86-64. <7>[ 14.269999] systemd[1]: Set hostname to . <6>[ 14.487014] cat (186) used greatest stack depth: 13296 bytes left <6>[ 14.496605] friendly-recove (183) used greatest stack depth: 12840 bytes left <6>[ 14.506515] mkdir (189) used greatest stack depth: 12568 bytes left <6>[ 14.548140] ls (192) used greatest stack depth: 12344 bytes left <7>[ 15.475121] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 15.493045] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 15.518153] systemd[1]: Created slice system-modprobe.slice. <7>[ 15.542951] systemd[1]: Created slice system-serial\x2dgetty.slice. <7>[ 15.567993] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 15.591738] systemd[1]: Created slice User and Session Slice. <7>[ 15.613445] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 15.636275] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 15.653319] systemd[1]: Reached target Remote File Systems. <7>[ 15.673050] systemd[1]: Reached target Slices. <7>[ 15.691756] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 15.719583] systemd[1]: Listening on Syslog Socket. <7>[ 15.738741] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 15.762069] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 15.824790] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 15.840209] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 15.862303] systemd[1]: Listening on Journal Socket. <7>[ 15.882134] systemd[1]: Listening on udev Control Socket. <7>[ 15.903260] systemd[1]: Listening on udev Kernel Socket. <7>[ 15.953136] systemd[1]: Mounting Huge Pages File System... <7>[ 16.006951] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 16.061584] systemd[1]: Mounting Kernel Debug File System... <7>[ 16.115764] systemd[1]: Mounting Kernel Trace File System... <7>[ 16.176465] systemd[1]: Starting Journal Service... <7>[ 16.223046] systemd[1]: Starting Set the console keyboard layout... <7>[ 16.288825] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 16.314237] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 16.330430] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 16.367439] systemd[1]: Starting File System Check on Root Device... <7>[ 16.425377] systemd[1]: Starting Load Kernel Modules... <7>[ 16.459787] systemd[1]: Starting udev Coldplug all Devices... <7>[ 16.488023] systemd[1]: Starting Uncomplicated firewall... <7>[ 16.510817] systemd[1]: Started Journal Service. <6>[ 17.572356] EXT4-fs (nvme0n1p2): re-mounted fec10944-567b-487d-898f-2dff9231051e r/w. Quota mode: disabled. <6>[ 17.698958] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 17.795916] systemd-journald[211]: Received client request to flush runtime journal. <5>[ 17.810699] systemd-journald[211]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 19.048122] pps_core: LinuxPPS API ver. 1 registered <6>[ 19.048135] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 19.057948] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 19.067286] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 19.067550] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 19.068635] PTP clock support registered <6>[ 19.365277] i2c i2c-0: 8/8 memory slots populated (from DMI) <4>[ 19.365302] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD <6>[ 19.382717] usbcore: registered new device driver r8152-cfgselector <6>[ 19.415669] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 19.415679] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 19.428249] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 19.449564] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 19.449854] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 19.558240] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 19.625703] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 19.626158] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 19.629994] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 19.661929] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 19.662381] usbcore: registered new interface driver r8152 <6>[ 19.674992] usbcore: registered new interface driver cdc_ether <6>[ 19.680526] usbcore: registered new interface driver r8153_ecm <6>[ 19.697919] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 19.698078] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection <6>[ 19.698216] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 19.722354] e1000e 0000:00:1f.6 eno0: renamed from eth1 <6>[ 19.930092] r8152 4-1:1.0 enxe2015072f33f: renamed from eth0 <6>[ 20.074147] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <4>[ 20.163995] ********************************************************** <4>[ 20.164001] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 20.164006] ** ** <4>[ 20.164012] ** trace_printk() being used. Allocating extra memory. ** <4>[ 20.164016] ** ** <4>[ 20.164021] ** This means that this is a DEBUG kernel and it is ** <4>[ 20.164027] ** unsafe for production use. ** <4>[ 20.164032] ** ** <4>[ 20.164037] ** If you see this message and you are not debugging ** <4>[ 20.164041] ** the kernel, report this immediately to your vendor! ** <4>[ 20.164046] ** ** <4>[ 20.164050] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 20.164055] ********************************************************** <6>[ 20.348992] i915 0000:00:02.0: Force probing unsupported Device ID 7d55, tainting kernel <7>[ 20.352828] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 20.353559] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <6>[ 20.354232] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - HuC is not supported! <7>[ 20.354293] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 20.354853] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 20.355428] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 20.356022] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 20.356613] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 20.357572] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 20.358184] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 20.359569] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0000, instances: 0000 <7>[ 20.360089] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0000, instances: 0000 <7>[ 20.362432] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7>[ 20.362941] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <5>[ 20.363302] i915 0000:00:02.0: [drm] No GSC FW selected, disabling GSC CS and media C6 <7>[ 20.364475] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 20.364998] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 20.365368] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 20.365713] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 20.374245] Console: switching to colour dummy device 80x25 <6>[ 20.384471] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 20.385232] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 20.385273] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000080400947 <7>[ 20.385966] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 61440K <7>[ 20.386568] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 20.387086] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 20.388693] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6fe0c018 <7>[ 20.389403] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 20.389962] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 20.390471] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 20.390969] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 20.391430] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 20.391990] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 20.392469] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 20.393377] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 20.393806] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2133 tRP=40 tRDPRE=32 tRAS=96 tRCD=40 tRC=136 <7>[ 20.394385] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 20.394933] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 20.395430] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=22338 peakbw: 34128 <7>[ 20.395948] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.396441] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.396956] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=25866 peakbw: 34128 <7>[ 20.397451] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.397954] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.398449] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=28082 peakbw: 34128 <7>[ 20.398951] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.399451] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.399959] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29340 peakbw: 34128 <7>[ 20.400453] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.400982] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.401520] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=30012 peakbw: 34128 <7>[ 20.402070] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.402591] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.403111] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=30359 peakbw: 34128 <7>[ 20.403592] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.404108] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.406398] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 20.407006] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 252 <7>[ 20.407529] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 20.408058] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 20.408599] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 20.409173] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 20.409719] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 20.410241] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 20.410741] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 20.411292] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 20.411837] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 20.412369] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 20.412922] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7>[ 20.413488] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 20.414048] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 20.414582] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 20.415145] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 20.415657] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 252 not known; assuming 39 <7>[ 20.416128] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 20.416611] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 20.417133] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 20.417657] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 20.418161] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 20.418675] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 20.419190] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 20.419702] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 20.420196] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7>[ 20.420700] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 20.421181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7>[ 20.421663] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 20.422125] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7>[ 20.422597] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 20.423084] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7>[ 20.423551] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 20.424036] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0 <7>[ 20.424515] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 20.425003] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0 <7>[ 20.425529] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 20.426137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 20.426934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <6>[ 20.427241] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <7>[ 20.427628] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 20.428576] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 20.429293] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 20.429968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 20.430496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 20.431033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 20.431663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 20.432267] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 20.432400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 20.433219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 20.433880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 20.434452] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 20.435249] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <6>[ 20.450997] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.13) <7>[ 20.452322] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 20.454433] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 20.455067] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 20.455568] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 72 (72.0 usec) <7>[ 20.456054] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 75 (75.0 usec) <7>[ 20.456512] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec) <7>[ 20.456992] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 140 (140.0 usec) <7>[ 20.457422] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec) <7>[ 20.491841] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 20.499530] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 20.502433] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 20.503215] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 20.503909] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7>[ 20.504484] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 20.505483] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 20.506151] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 20.506795] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 20.507380] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 20.507950] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 20.508477] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 20.509006] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 20.509509] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 20.510030] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 20.510841] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 20.511517] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 20.512039] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 20.512481] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 20.512924] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 20.513348] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 20.513901] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 20.514698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 20.516916] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 20.517622] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 20.520819] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 20.521692] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 20.522605] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 20.524064] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 20.526283] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 20.529813] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 20.530332] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] FEC CAPABILITY: 0 <7>[ 20.541589] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 20.541668] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 20.541683] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 20.541842] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 20.543273] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 20.544706] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 20.545369] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 20.545975] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 20.546596] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 20.547099] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 20.547538] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 20.548113] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 20.548537] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 20.549091] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 20.550373] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] using AUX B (VBT) <7>[ 20.551012] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 20.552251] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 20.552789] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 20.553571] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] using AUX D (VBT) <7>[ 20.554978] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.555817] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 20.556938] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] using AUX E (VBT) <7>[ 20.557608] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 20.558844] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 20.559416] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 20.559915] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 20.560585] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] using AUX F (VBT) <7>[ 20.561225] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.561942] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 20.563009] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] using AUX G (VBT) <7>[ 20.563622] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.564258] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 20.566376] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 20.567281] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 20.568048] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 20.568785] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 20.569291] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 20.569892] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 20.570402] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 20.570929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 20.571401] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 20.571918] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 20.572401] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 20.572912] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 20.573391] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 20.573898] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 20.574363] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 20.574841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 20.575291] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 20.575761] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 20.576211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 20.576661] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 20.577100] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 20.577537] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 20.578006] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 20.578460] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 20.578936] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 20.579381] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 20.579848] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 20.580284] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 20.581487] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no, <7>[ 20.582040] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 20.582525] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 20.583039] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 20.583516] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 20.584008] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 20.584449] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 20.584897] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 20.585315] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 20.586320] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 20.586980] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 20.587571] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 20.588131] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 20.588611] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.589091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.589537] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.589996] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.590526] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 20.591061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 20.591534] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.592011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.592454] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.592927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.593496] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 20.594018] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 20.594527] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 20.595040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 20.595505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.595993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.596438] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.596898] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.597374] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 20.597854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 20.598305] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.598782] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.599235] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.599694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.600616] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 20.601275] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 20.601816] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 20.602303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 20.602804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 20.603284] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 20.603779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 20.604738] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 20.605283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 20.605766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 20.606235] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 20.606701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 20.607165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 20.607619] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 20.608201] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 20.608706] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 20.609176] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 20.609628] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 20.610093] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 20.610539] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 20.610995] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 20.611538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 20.612054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 20.612519] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 20.612987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 20.613437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 20.613922] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 20.614365] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 20.614927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 20.615414] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 20.615908] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 20.616378] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 20.616840] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 20.617278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 20.617742] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 20.619088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 20.619766] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 20.620295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 20.620818] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 20.621309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 20.621829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 20.622333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 20.622837] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 20.623329] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 20.623826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 20.624296] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 20.624785] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 20.625268] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.625772] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.626253] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.626760] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.627246] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.627764] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 20.628262] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 20.628759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 20.629242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 20.629745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 20.630222] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 20.630755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 20.631245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 20.631742] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.632217] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.632719] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.633208] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.633728] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.634232] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.634749] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.635244] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.635741] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.636223] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.636725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 20.637216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 20.637718] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 20.638510] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 20.639055] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.639527] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.640005] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.641570] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fc000000, pitch 11520, size 0x13c6800 <7>[ 20.642222] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 20.656566] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 20.675888] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 20.676512] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000] <7>[ 20.676981] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 20.677535] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 20.677546] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 20.677553] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 20.677587] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7>[ 20.680871] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 engine workarounds on rcs'0 <7>[ 20.681498] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on rcs'0 <7>[ 20.682035] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7>[ 20.685956] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7>[ 20.686588] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 2 context workarounds on bcs'0 <7>[ 20.688843] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on ccs'0 <7>[ 20.689443] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on ccs'0 <7>[ 20.694487] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 20.695215] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 20.695907] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 20.760759] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 20.761400] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7>[ 20.761977] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 20.762482] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 20.762998] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 20.763479] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 20.763975] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 20.764467] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 20.765093] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 20.765679] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 20.766182] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 20.766691] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 20.767164] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 20.767611] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 20.769910] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.8.0 <7>[ 20.782099] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 2250MHz, before = 2250MHz, status = 0x8002F034, count = 0, ret = 0 <6>[ 20.785150] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 20.785564] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 20.792084] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 20.792108] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 20.793282] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 20.811504] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 20.811549] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7>[ 20.813294] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7>[ 20.813922] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'0 <7>[ 20.815391] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7>[ 20.815969] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'2 <7>[ 20.817321] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7>[ 20.817864] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vecs'0 <7>[ 20.821958] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 20.822667] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 20.823276] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 20.887969] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 20.888610] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x200000 <7>[ 20.889156] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 20.889636] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 20.890120] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 20.890580] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 20.891057] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 20.891510] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 20.891986] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 20.892442] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 20.892900] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 20.893362] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 20.893842] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 20.894306] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 20.894787] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <6>[ 20.896934] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.8.0 <6>[ 20.896957] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.1 <7>[ 20.914945] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 15ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 20.915971] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 20.924627] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 20.925814] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 20.925825] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 20.926144] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 20.932956] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.934251] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.935019] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.935801] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 20.936441] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 20.937328] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 20.938000] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 20.938463] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 20.938924] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 20.939455] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 20.939956] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 20.940489] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 20.941009] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 20.941502] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 20.942084] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 20.942590] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 20.943214] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 20.943695] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 20.944142] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.944575] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.945034] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.945466] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.945905] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.946311] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.946745] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.947162] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.947584] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.948024] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.948455] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.948917] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.949333] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.949773] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.950232] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.950707] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.951153] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.951575] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.952018] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.952428] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.952861] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.953273] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.953703] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.954115] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 20.954696] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 20.954714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 20.955274] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 20.955810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 20.956300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 20.956797] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 20.957258] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 20.957745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 20.958211] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 20.958706] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 20.959187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 20.959690] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 20.960170] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 20.960180] i915 0000:00:02.0: pixelformat: RGB <7>[ 20.960188] i915 0000:00:02.0: colorimetry: sRGB <7>[ 20.960195] i915 0000:00:02.0: bpc: 0 <7>[ 20.960202] i915 0000:00:02.0: dynamic range: VESA range <7>[ 20.960210] i915 0000:00:02.0: content type: Not defined <7>[ 20.960218] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 20.960741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.961226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 20.961739] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.962224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.962735] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.963232] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 20.964283] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 20.964921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 20.965422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 20.965933] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 20.966425] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 20.966977] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 20.967499] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 20.968029] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.968527] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.969038] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.969523] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.970040] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.970534] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.971036] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.971515] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.972004] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.972478] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.972968] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 20.973452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 20.973971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 20.974477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 20.975002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 20.975506] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 20.977921] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7>[ 21.184051] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 21.186173] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 21.192580] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 21.193310] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 21.193916] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 21.245451] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 21.246472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 21.247943] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 21.248606] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 21.249173] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 21.249669] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 21.250123] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 21.250562] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 21.251018] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 21.251445] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 21.251894] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 21.252320] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 21.252761] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 21.253190] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 21.253608] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 21.254044] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 21.254462] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 21.254894] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 21.255321] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 21.255763] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 21.256201] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 21.256667] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 21.257103] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 21.257536] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <6>[ 21.258103] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <7>[ 21.257989] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 21.258506] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 21.259316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 21.261082] i915 0000:00:02.0: [drm:intel_dp_128b132b_sdp_crc16 [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] DP2.0 SDP CRC16 for 128b/132b enabled <7>[ 21.261750] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 21.262309] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7>[ 21.855901] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 21.856574] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 21.857193] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 21.857797] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 22.058422] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 22.061114] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 22.061811] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 22.065435] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 22.066288] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 22.067991] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 22.069754] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 22.070728] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 22.072948] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 22.073422] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 22.076369] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 22.076823] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 22.077932] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 22.078978] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 22.079516] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 22.080078] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 22.090031] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 22.091547] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.092269] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 22.094371] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 22.094959] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 22.095428] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 22.095891] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 22.096320] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 22.096758] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 22.097179] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 22.097590] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 22.098027] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 22.098446] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 22.098913] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 22.099360] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 22.100546] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 22.102558] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 22.103195] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 22.103755] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 22.104220] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 22.104682] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 22.105225] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 22.108300] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7>[ 22.109038] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7>[ 22.109440] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7>[ 22.109811] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7>[ 22.110136] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7>[ 22.110437] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed ccs'0 to ccs0 <7>[ 22.138258] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 22.139461] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 22.143220] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 22.144531] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 22.146987] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 22.148161] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 22.149165] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 22.152857] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 22.154038] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 22.155093] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 22.157422] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 22.158507] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 22.162100] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 22.162294] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7>[ 22.169305] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 22.213756] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 22.225226] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <6>[ 22.234371] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7>[ 22.235383] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 22.236115] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 22.238130] [drm:drm_client_modeset_probe] <7>[ 22.239325] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 22.239189] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 22.239912] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x2) gen=12 <7>[ 22.239924] i915 device info: graphics version: 12.71 <7>[ 22.239932] i915 device info: media version: 13 <7>[ 22.239939] i915 device info: display version: 14 <7>[ 22.239947] i915 device info: graphics stepping: B0 <7>[ 22.239954] i915 device info: media stepping: C0 <7>[ 22.239960] i915 device info: display stepping: C0 <7>[ 22.239478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.239968] i915 device info: base die stepping: ** <7>[ 22.239973] i915 device info: gt: 0 <7>[ 22.239977] i915 device info: memory-regions: 0x41 <7>[ 22.239982] i915 device info: page-sizes: 0x211000 <7>[ 22.239987] i915 device info: platform: METEORLAKE <7>[ 22.239991] i915 device info: ppgtt-size: 48 <7>[ 22.239994] i915 device info: ppgtt-type: 2 <7>[ 22.239998] i915 device info: dma_mask_size: 46 <7>[ 22.240002] i915 device info: is_mobile: no <7>[ 22.240006] i915 device info: is_lp: no <7>[ 22.240011] i915 device info: require_force_probe: yes <7>[ 22.240015] i915 device info: is_dgfx: no <7>[ 22.240019] i915 device info: has_64bit_reloc: yes <7>[ 22.240023] i915 device info: has_64k_pages: no <7>[ 22.240027] i915 device info: gpu_reset_clobbers_display: no <7>[ 22.240031] i915 device info: has_reset_engine: yes <7>[ 22.240035] i915 device info: has_3d_pipeline: yes <7>[ 22.240039] i915 device info: has_4tile: yes <7>[ 22.240043] i915 device info: has_flat_ccs: no <7>[ 22.240047] i915 device info: has_global_mocs: yes <7>[ 22.240051] i915 device info: has_gmd_id: yes <7>[ 22.240055] i915 device info: has_gt_uc: yes <7>[ 22.240059] i915 device info: has_heci_pxp: no <7>[ 22.240063] i915 device info: has_heci_gscfi: no <7>[ 22.240067] i915 device info: has_guc_deprivilege: yes <7>[ 22.240071] i915 device info: has_l3_ccs_read: no <7>[ 22.240075] i915 device info: has_l3_dpf: no <7>[ 22.240078] i915 device info: has_llc: no <7>[ 22.240082] i915 device info: has_logical_ring_contexts: yes <7>[ 22.240086] i915 device info: has_logical_ring_elsq: yes <7>[ 22.240090] i915 device info: has_media_ratio_mode: no <7>[ 22.240094] i915 device info: has_mslice_steering: no <7>[ 22.240097] i915 device info: has_oa_bpc_reporting: yes <7>[ 22.240101] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 22.240105] i915 device info: has_oam: yes <7>[ 22.240110] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 22.240115] i915 device info: has_pxp: yes <7>[ 22.240118] i915 device info: has_rc6: yes <7>[ 22.240122] i915 device info: has_rc6p: no <7>[ 22.240126] i915 device info: has_rps: yes <7>[ 22.240129] i915 device info: has_runtime_pm: yes <7>[ 22.240133] i915 device info: has_snoop: yes <7>[ 22.240136] i915 device info: has_coherent_ggtt: no <7>[ 22.240140] i915 device info: tuning_thread_rr_after_dep: no <7>[ 22.240144] i915 device info: unfenced_needs_alignment: no <7>[ 22.240148] i915 device info: hws_needs_physical: no <7>[ 22.240152] i915 device info: has_pooled_eu: no <7>[ 22.240155] i915 device info: cursor_needs_physical: no <7>[ 22.240159] i915 device info: has_cdclk_crawl: yes <7>[ 22.240163] i915 device info: has_cdclk_squash: yes <7>[ 22.240167] i915 device info: has_ddi: yes <7>[ 22.240170] i915 device info: has_dp_mst: yes <7>[ 22.240174] i915 device info: has_dsb: yes <7>[ 22.240178] i915 device info: has_fpga_dbg: yes <7>[ 22.240182] i915 device info: has_gmch: no <7>[ 22.240185] i915 device info: has_hotplug: yes <7>[ 22.240189] i915 device info: has_hti: no <7>[ 22.240192] i915 device info: has_ipc: yes <7>[ 22.240196] i915 device info: has_overlay: no <7>[ 22.240200] i915 device info: has_psr: yes <7>[ 22.240203] i915 device info: has_psr_hw_tracking: no <7>[ 22.240207] i915 device info: overlay_needs_physical: no <7>[ 22.240211] i915 device info: supports_tv: no <7>[ 22.240214] i915 device info: has_hdcp: yes <7>[ 22.240218] i915 device info: has_dmc: yes <7>[ 22.240222] i915 device info: has_dsc: yes <7>[ 22.240225] i915 device info: rawclk rate: 38400 kHz <7>[ 22.240231] i915 device info: iommu: enabled <7>[ 22.240237] i915 device info: available engines: 400003 <7>[ 22.240243] i915 device info: subslice total: 8 <7>[ 22.240247] i915 device info: geometry dss mask=00000000,000000ff <7>[ 22.240253] i915 device info: compute dss mask=00000000,000000ff <7>[ 22.240257] i915 device info: EU total: 128 <7>[ 22.240261] i915 device info: EU per subslice: 16 <7>[ 22.240266] i915 device info: has slice power gating: no <7>[ 22.240270] i915 device info: has subslice power gating: no <7>[ 22.240274] i915 device info: has EU power gating: no <7>[ 22.240278] i915 device info: available engines: 41400 <7>[ 22.240283] i915 device info: subslice total: 8 <7>[ 22.240286] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 22.240291] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 22.240295] i915 device info: EU total: 128 <7>[ 22.240298] i915 device info: EU per subslice: 16 <7>[ 22.240302] i915 device info: has slice power gating: no <7>[ 22.240305] i915 device info: has subslice power gating: no <7>[ 22.240309] i915 device info: has EU power gating: no <6>[ 22.240314] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 22.240320] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 22.240324] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 22.244171] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.244899] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 22.246285] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 22.246830] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 22.247354] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 22.247770] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 22.248572] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 22.248606] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 22.248621] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 22.248789] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 22.249390] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 22.251751] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.252457] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 22.254606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 22.255790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 22.256359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 22.257153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 22.258860] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 22.261171] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 22.261322] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.261379] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 22.261498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 22.263029] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 22.263144] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 22.263243] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.263321] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.264542] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 22.264707] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 22.264792] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 22.264868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 22.267234] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 22.267397] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 22.267514] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.267637] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.268933] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 22.269033] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 22.269130] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 22.269208] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 22.270361] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 22.270460] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 22.270555] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 22.270631] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 22.271870] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 22.271969] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 22.272060] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 22.272085] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 22.272101] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 22.272116] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 22.272132] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 22.272146] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 22.272161] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 22.272593] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 22.272985] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 22.273006] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 22.273023] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 22.273039] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 22.273097] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 22.273408] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7>[ 22.273705] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 22.291823] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01a00000 <6>[ 22.295520] fbcon: i915drmfb (fb0) is primary device <7>[ 22.300394] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 22.301746] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 22.302733] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 22.303524] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 22.304834] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 22.305907] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 22.306971] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 22.308174] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7>[ 22.309114] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 22.310000] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 <7>[ 22.310868] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 <7>[ 22.311710] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 <7>[ 22.312509] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 22.313531] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 22338 required 2159 qgv_peak_bw: 34128 <7>[ 22.314620] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 22.315555] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 22.316484] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 34128 for required data rate: 2159 <7>[ 22.317516] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 22.318543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 22.319703] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 22.320695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 22.321539] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 22.322800] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 22.323550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 22.324267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 22.325048] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 22.326196] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 22.327014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 22.327756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 22.328466] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 22.328476] i915 0000:00:02.0: pixelformat: RGB <7>[ 22.328483] i915 0000:00:02.0: colorimetry: sRGB <7>[ 22.328490] i915 0000:00:02.0: bpc: 0 <7>[ 22.328497] i915 0000:00:02.0: dynamic range: VESA range <7>[ 22.328505] i915 0000:00:02.0: content type: Not defined <7>[ 22.328512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 22.329304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.330067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.330803] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 22.331496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 22.332248] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 22.333158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 22.334060] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 22.334933] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 22.335778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 22.336589] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 22.337495] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 22.338585] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 22.339500] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 22.340381] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 22.341084] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.341801] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.342556] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.343445] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 22.344190] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 22.344929] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.345739] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.346411] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.347176] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 22.348015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 22.348846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 22.349677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 22.350485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 22.351358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 22.352168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 22.352863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 22.353738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 22.357154] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x1550071 0x13421c72) <7>[ 22.359034] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 22.359944] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 22.360909] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 22.361912] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 22.362945] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 22.363876] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 22.364773] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 22.365590] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 22.366496] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 22.367389] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 22.368243] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 22.369101] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 22.369979] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 22.370813] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 22.371565] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 22.372415] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 22.373241] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 22.374051] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 22.374823] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 22.375563] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 22.376430] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 22.377483] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 22.389918] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 22.394737] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.395239] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 22.397271] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 22.398302] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 22.399277] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 22.400214] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 22.401323] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 22.402203] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 22.403059] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 22.403894] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 22.404635] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 22.405485] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 22.406407] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <6>[ 22.410535] Console: switching to colour frame buffer device 360x112 <6>[ 22.445934] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 22.456981] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 22.457077] [drm:drm_client_modeset_probe] <7>[ 22.457999] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 22.458087] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.460828] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.461370] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 22.462342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 22.462994] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 22.463033] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 22.463417] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 22.464568] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 22.465107] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 22.465908] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 22.466042] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 22.466054] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 22.466319] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 22.466788] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 22.468394] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.468755] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 22.469964] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 22.470129] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.470144] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 22.470183] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 22.470906] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 22.470946] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.470975] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.471342] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 22.471371] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 22.471398] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 22.471924] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 22.471957] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.471987] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.472395] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 22.472424] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 22.472453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 22.472900] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 22.472940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 22.472977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 22.473481] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 22.473519] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 22.473529] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 22.473536] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 22.473541] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 22.473546] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 22.473551] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 22.473556] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 22.473855] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 22.473909] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 22.473915] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 22.473921] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 22.473926] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 22.474008] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 22.488152] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 309 us, max time under evasion is 250 us <7>[ 22.490547] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 22.491009] [drm:drm_client_modeset_probe] <7>[ 22.491129] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 22.491177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.492789] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.493259] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 22.494617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 22.495096] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 22.495453] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 22.495894] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 22.496471] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 22.496489] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 22.496502] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 22.496555] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 22.497061] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 22.498523] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.498971] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 22.500780] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 22.500843] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.500868] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 22.500922] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 22.501475] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 22.501511] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.501545] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.502143] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 22.502186] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 22.502218] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 22.502738] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 22.502786] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.502826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.503299] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 22.503340] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 22.503381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 22.504244] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 22.504299] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 22.504337] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 22.505001] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 22.505037] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 22.505045] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 22.505051] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 22.505056] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 22.505060] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 22.505066] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 22.505070] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 22.505148] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 22.505172] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 22.505177] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 22.505182] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 22.505186] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 22.505229] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <6>[ 22.525124] setfont (506) used greatest stack depth: 12240 bytes left <7>[ 22.541157] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.542076] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.542989] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.543742] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.544368] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.545085] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.545796] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.546414] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.547165] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.547905] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.548716] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.549527] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.550174] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.550789] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.551394] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.552151] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.552985] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.553769] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.554443] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.555072] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.555770] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.556354] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.556993] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.557713] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.558306] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.558973] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.559559] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.560204] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.560800] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.561380] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.562014] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.562709] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.563292] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.563944] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.564615] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.565316] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <6>[ 22.582091] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 <6>[ 22.587476] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 <6>[ 22.592363] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 22.597956] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 22.663513] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 22.664230] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <6>[ 22.724257] r8152 4-1:1.0 enxe2015072f33f: carrier on <7>[ 25.505767] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 25.507041] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 25.790819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 25.792476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 25.793769] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 25.794910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 26.868018] systemd-udevd (277) used greatest stack depth: 11240 bytes left <6>[ 26.881015] systemd-udevd (284) used greatest stack depth: 11216 bytes left <7>[ 29.099306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 29.101736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 29.115557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 29.116928] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 29.118126] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4>[ 34.789839] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=671 'systemd' <5>[ 35.255788] systemd-journald[211]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 35.334930] systemd-journald[211]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 36.208713] fuse: init (API version 7.38)