igt@i915_selftest@live@uncore on fi-cfl-guc@linus-v6.5 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g34b68fb58 (x86_64) (Linux: 6.5.0-linus-v6.5-g2dde18cd1d8f+ x86_64)
Out	Starting dynamic subtest: uncore Dynamic subtest uncore: SUCCESS (0.527s)
Err	Starting dynamic subtest: uncore Dynamic subtest uncore: SUCCESS (0.527s)
Dmesg	<6> [229.597594] [IGT] i915_selftest: starting dynamic subtest uncore <5> [229.682530] Setting dangerous option enable_guc - tainting kernel <5> [229.682537] Setting dangerous option live_selftests - tainting kernel <7> [229.710904] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [229.711088] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [229.711229] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [229.711237] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP) <7> [229.711369] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [229.711652] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [229.711788] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [229.712343] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [229.712504] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [229.712673] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [229.712787] i915 0000:00:02.0: vgaarb: deactivate vga console <7> [229.712919] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047 <7> [229.713038] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [229.713284] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8c90a018 <7> [229.713503] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [229.713670] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [229.713793] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [229.713914] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [229.717800] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [229.717938] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [229.718069] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [229.718199] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [229.718330] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [229.718486] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [229.718638] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [229.718751] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [229.718846] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [229.718940] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [229.719033] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [229.719127] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [229.719220] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [229.719312] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [229.720100] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [229.720280] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209 <7> [229.720488] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [229.720725] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [229.720868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [229.721010] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [229.721152] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [229.721293] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [229.721492] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [229.721691] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [229.721833] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [229.721974] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [229.722113] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [229.722250] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [229.722411] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [229.722643] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [229.722784] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [229.722925] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [229.723065] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [229.723205] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [229.723344] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port E trying to use the same AUX CH (0x40) as port A, disabling port A DP support <7> [229.723521] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [229.723755] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [229.723892] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [229.724030] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9 <7> [229.724167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [229.724305] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 10 <7> [229.724534] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [229.724745] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 10 <7> [229.724898] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [229.725036] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [229.725175] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [229.725321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [229.725563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [229.725784] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [229.725927] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [229.726069] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [229.726208] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [229.726347] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [229.726598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [229.726805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [229.726943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [229.727090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [229.727256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [229.727438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [229.727649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [229.727788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [229.727950] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [229.728984] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [229.729047] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [229.729445] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [229.729650] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [229.729785] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [229.729916] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [229.730046] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [229.730176] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [229.730306] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [229.730515] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [229.730718] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [229.730864] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [229.731858] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [229.732691] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [229.732871] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port A is not DVI/HDMI/DP compatible, respect it <7> [229.733032] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default) <7> [229.733176] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [229.733310] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [229.733629] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:104:DDI C/PHY C] using AUX C (platform default) <7> [229.733772] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [229.733905] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [229.734098] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI D/PHY D] using AUX D (VBT) <7> [229.734269] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI D/PHY D] <7> [229.734633] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [229.734770] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D/PHY D] <7> [229.734897] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:108:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [229.735080] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:119:DDI E/PHY E] using AUX A (VBT) <7> [229.735218] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:119:DDI E/PHY E] <7> [229.735432] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [229.735812] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [229.735969] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [229.736121] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [229.736260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [229.736448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [229.736676] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [229.736815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [229.736953] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [229.737091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [229.737229] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [229.737366] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [229.737605] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [229.737798] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [229.737936] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [229.738074] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D/PHY D] hw state readout: disabled, pipe A <7> [229.738207] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST A] hw state readout: disabled, pipe A <7> [229.738341] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST B] hw state readout: disabled, pipe B <7> [229.738576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST C] hw state readout: disabled, pipe C <7> [229.738767] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DDI E/PHY E] hw state readout: disabled, pipe A <7> [229.738906] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [229.739048] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [229.739189] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [229.739328] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [229.739598] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [229.739779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [229.739922] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [229.740065] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:HDMI-A-3] hw state readout: disabled <7> [229.740207] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:120:DP-2] hw state readout: disabled <7> [229.740341] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [229.740575] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [229.740762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [229.740895] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [229.741035] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [229.741170] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [229.741303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [229.741535] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [229.741729] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [229.741865] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [229.741998] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [229.742131] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [229.742303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [229.742530] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [229.742723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [229.742861] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [229.742999] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [229.743133] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [229.743264] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [229.745571] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [229.745702] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [229.745815] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [229.745932] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [229.746062] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7> [229.746932] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [229.747066] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [229.747194] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [229.751236] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [229.751436] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [229.751614] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [229.773723] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [229.773886] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [229.774026] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [229.774165] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [229.774304] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [229.774449] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x3e920000 <7> [229.774588] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [229.774727] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [229.774864] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [229.775001] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [229.775139] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [229.775277] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [229.775420] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [229.775558] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [229.775696] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [229.776706] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [229.776709] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [229.782429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [229.783024] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [229.783168] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [229.783170] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [229.790280] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [229.790502] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [229.790633] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [229.790761] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [229.790887] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [229.791028] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [229.791438] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [229.791542] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [229.791640] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [229.791735] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [229.793595] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [229.793847] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [229.794097] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 <7> [229.794617] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <7> [229.794865] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:HDMI-A-3] generating connector hotplug event <7> [229.795108] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 <7> [229.795626] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:120:DP-2] generating connector hotplug event <6> [229.795662] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [229.796952] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [229.809471] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [229.811193] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input59 <7> [229.811948] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [229.812414] [drm:drm_client_modeset_probe] <7> [229.812453] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [229.812409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [229.812471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [229.812608] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [229.812627] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [229.812578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [229.812692] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [229.812704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [229.812729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [229.812834] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [229.812850] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [229.812865] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [229.812875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [229.812880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [229.813005] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [229.813021] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [229.813035] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] <7> [229.813045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [229.813174] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] status updated from unknown to disconnected <7> [229.813190] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected <7> [229.813204] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] <7> [229.813215] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [229.813344] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] status updated from unknown to disconnected <7> [229.813288] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [229.813360] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected <7> [229.813373] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [229.813376] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [229.813378] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [229.813380] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [229.813392] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [229.813394] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [229.813418] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [229.813424] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [229.813436] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7> [229.813444] i915 device info: pciid=0x3e92 rev=0x00 platform=COFFEELAKE (subplatform=0x0) gen=9 <7> [229.813447] i915 device info: graphics version: 9 <7> [229.813449] i915 device info: media version: 9 <7> [229.813450] i915 device info: display version: 9 <6> [229.813450] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [229.813452] i915 device info: graphics stepping: <7> [229.813454] i915 device info: media stepping: <7> [229.813456] i915 device info: display stepping: <7> [229.813458] i915 device info: base die stepping: <7> [229.813461] i915 device info: gt: 2 <7> [229.813463] i915 device info: memory-regions: 0x21 <7> [229.813465] i915 device info: page-sizes: 0x11000 <7> [229.813467] i915 device info: platform: COFFEELAKE <7> [229.813469] i915 device info: ppgtt-size: 48 <7> [229.813472] i915 device info: ppgtt-type: 2 <7> [229.813474] i915 device info: dma_mask_size: 39 <7> [229.813477] i915 device info: is_mobile: no <7> [229.813479] i915 device info: is_lp: no <7> [229.813482] i915 device info: require_force_probe: no <7> [229.813484] i915 device info: is_dgfx: no <7> [229.813486] i915 device info: has_64bit_reloc: yes <7> [229.813489] i915 device info: has_64k_pages: no <7> [229.813491] i915 device info: gpu_reset_clobbers_display: no <7> [229.813493] i915 device info: has_reset_engine: yes <7> [229.813495] i915 device info: has_3d_pipeline: yes <7> [229.813498] i915 device info: has_4tile: no <7> [229.813500] i915 device info: has_flat_ccs: no <7> [229.813502] i915 device info: has_global_mocs: no <7> [229.813504] i915 device info: has_gmd_id: no <7> [229.813521] i915 device info: has_gt_uc: yes <7> [229.813524] i915 device info: has_heci_pxp: no <7> [229.813526] i915 device info: has_heci_gscfi: no <7> [229.813528] i915 device info: has_guc_deprivilege: no <7> [229.813531] i915 device info: has_l3_ccs_read: no <7> [229.813533] i915 device info: has_l3_dpf: no <7> [229.813535] i915 device info: has_llc: yes <7> [229.813538] i915 device info: has_logical_ring_contexts: yes <7> [229.813540] i915 device info: has_logical_ring_elsq: no <7> [229.813542] i915 device info: has_media_ratio_mode: no <7> [229.813545] i915 device info: has_mslice_steering: no <7> [229.813547] i915 device info: has_oa_bpc_reporting: no <7> [229.813549] i915 device info: has_oa_slice_contrib_limits: no <7> [229.813551] i915 device info: has_oam: no <7> [229.813554] i915 device info: has_one_eu_per_fuse_bit: no <7> [229.813556] i915 device info: has_pxp: no <7> [229.813558] i915 device info: has_rc6: yes <7> [229.813560] i915 device info: has_rc6p: no <7> [229.813562] i915 device info: has_rps: yes <7> [229.813564] i915 device info: has_runtime_pm: yes <7> [229.813567] i915 device info: has_snoop: no <7> [229.813569] i915 device info: has_coherent_ggtt: yes <7> [229.813571] i915 device info: tuning_thread_rr_after_dep: no <7> [229.813574] i915 device info: unfenced_needs_alignment: no <7> [229.813576] i915 device info: hws_needs_physical: no <7> [229.813578] i915 device info: has_pooled_eu: no <7> [229.813580] i915 device info: cursor_needs_physical: no <7> [229.813583] i915 device info: has_cdclk_crawl: no <7> [229.813585] i915 device info: has_cdclk_squash: no <7> [229.813587] i915 device info: has_ddi: yes <7> [229.813589] i915 device info: has_dp_mst: yes <7> [229.813592] i915 device info: has_dsb: no <7> [229.813594] i915 device info: has_fpga_dbg: yes <7> [229.813596] i915 device info: has_gmch: no <7> [229.813599] i915 device info: has_hotplug: yes <7> [229.813601] i915 device info: has_hti: no <7> [229.813603] i915 device info: has_ipc: yes <7> [229.813606] i915 device info: has_overlay: no <7> [229.813608] i915 device info: has_psr: yes <7> [229.813610] i915 device info: has_psr_hw_tracking: yes <7> [229.813613] i915 device info: overlay_needs_physical: no <7> [229.813615] i915 device info: supports_tv: no <7> [229.813617] i915 device info: has_hdcp: yes <7> [229.813620] i915 device info: has_dmc: yes <7> [229.813639] i915 device info: has_dsc: no <7> [229.813641] i915 device info: rawclk rate: 24000 kHz <7> [229.813644] i915 device info: iommu: disabled <7> [229.813646] i915 device info: available engines: 40403 <7> [229.813649] i915 device info: slice total: 1, mask=0001 <7> [229.813652] i915 device info: subslice total: 3 <7> [229.813655] i915 device info: slice0: 3 subslices, mask=00000007 <7> [229.813658] i915 device info: slice1: 0 subslices, mask=00000000 <7> [229.813660] i915 device info: slice2: 0 subslices, mask=00000000 <7> [229.813663] i915 device info: EU total: 24 <7> [229.813666] i915 device info: EU per subslice: 8 <7> [229.813668] i915 device info: has slice power gating: no <7> [229.813671] i915 device info: has subslice power gating: no <7> [229.813673] i915 device info: has EU power gating: yes <6> [229.813675] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [229.813678] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [229.813681] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [229.813684] i915: Performing live selftests with st_random_seed=0x1bd78469 st_timeout=500 <6> [229.813688] i915: Running uncore <6> [229.813722] i915: Running intel_uncore_live_selftests/live_fw_table <7> [229.813953] [drm:drm_client_modeset_probe] <7> [229.814246] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [229.814292] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [229.814555] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [229.814574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [229.814606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [229.814793] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [229.814811] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [229.814828] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [229.815011] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [229.815029] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] <7> [229.815046] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [229.815228] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected <7> [229.815246] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] <7> [229.815262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [229.815493] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected <7> [229.815511] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [229.815519] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [229.815523] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [229.815527] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [229.815531] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [229.815534] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [229.815635] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [229.815650] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [229.815677] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [229.815703] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [229.815765] [drm:drm_client_modeset_probe] <7> [229.815815] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [229.815833] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [229.816018] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [229.816036] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [229.816052] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [229.816238] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [229.816256] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [229.816272] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [229.816833] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [229.816847] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] <7> [229.816858] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [229.816987] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected <7> [229.816998] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] <7> [229.817009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [229.817134] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected <7> [229.817145] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [229.817148] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [229.817151] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [229.817153] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [229.817155] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [229.817157] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [229.817177] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [229.817184] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [229.817197] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [229.817210] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [229.832472] i915: Running intel_uncore_live_selftests/live_forcewake_ops <6> [229.832489] i915: Running intel_uncore_live_selftests/live_forcewake_domains <7> [229.832504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [229.832722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [229.832919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [229.833116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [229.857553] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [229.901925] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [229.944715] i915: probe of 0000:00:02.0 failed with error -25 <6> [230.125281] [IGT] i915_selftest: finished subtest uncore, SUCCESS

<6> [229.597594] [IGT] i915_selftest: starting dynamic subtest uncore

<5> [229.682530] Setting dangerous option enable_guc - tainting kernel

<5> [229.682537] Setting dangerous option live_selftests - tainting kernel

<7> [229.710904] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [229.711088] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [229.711229] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [229.711237] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP)

<7> [229.711369] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [229.711652] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [229.711788] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [229.712343] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [229.712504] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [229.712673] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [229.712787] i915 0000:00:02.0: vgaarb: deactivate vga console

<7> [229.712919] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047

<7> [229.713038] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [229.713284] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8c90a018

<7> [229.713503] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [229.713670] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [229.713793] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [229.713914] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [229.717800] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [229.717938] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [229.718069] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [229.718199] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [229.718330] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [229.718486] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [229.718638] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [229.718751] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [229.718846] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [229.718940] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [229.719033] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [229.719127] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [229.719220] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [229.719312] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [229.720100] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [229.720280] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209

<7> [229.720488] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [229.720725] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [229.720868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [229.721010] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [229.721152] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [229.721293] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [229.721492] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [229.721691] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [229.721833] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [229.721974] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [229.722113] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [229.722250] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [229.722411] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [229.722643] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [229.722784] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [229.722925] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [229.723065] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [229.723205] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [229.723344] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port E trying to use the same AUX CH (0x40) as port A, disabling port A DP support

<7> [229.723521] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [229.723755] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [229.723892] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [229.724030] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9

<7> [229.724167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [229.724305] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 10

<7> [229.724534] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [229.724745] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 10

<7> [229.724898] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [229.725036] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [229.725175] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [229.725321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [229.725563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [229.725784] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [229.725927] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [229.726069] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [229.726208] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [229.726347] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [229.726598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [229.726805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [229.726943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [229.727090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [229.727256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [229.727438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [229.727649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [229.727788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [229.727950] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [229.728984] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [229.729047] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [229.729445] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [229.729650] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [229.729785] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [229.729916] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [229.730046] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [229.730176] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [229.730306] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [229.730515] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [229.730718] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [229.730864] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [229.731858] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [229.732691] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [229.732871] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port A is not DVI/HDMI/DP compatible, respect it

<7> [229.733032] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default)

<7> [229.733176] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [229.733310] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [229.733629] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:104:DDI C/PHY C] using AUX C (platform default)

<7> [229.733772] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [229.733905] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [229.734098] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI D/PHY D] using AUX D (VBT)

<7> [229.734269] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI D/PHY D]

<7> [229.734633] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [229.734770] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D/PHY D]

<7> [229.734897] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:108:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [229.735080] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:119:DDI E/PHY E] using AUX A (VBT)

<7> [229.735218] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:119:DDI E/PHY E]

<7> [229.735432] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [229.735812] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [229.735969] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [229.736121] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [229.736260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [229.736448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [229.736676] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [229.736815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [229.736953] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [229.737091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [229.737229] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [229.737366] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [229.737605] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [229.737798] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [229.737936] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [229.738074] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [229.738207] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST A] hw state readout: disabled, pipe A

<7> [229.738341] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST B] hw state readout: disabled, pipe B

<7> [229.738576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST C] hw state readout: disabled, pipe C

<7> [229.738767] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [229.738906] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [229.739048] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [229.739189] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [229.739328] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [229.739598] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [229.739779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [229.739922] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [229.740065] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:HDMI-A-3] hw state readout: disabled

<7> [229.740207] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:120:DP-2] hw state readout: disabled

<7> [229.740341] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [229.740575] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [229.740762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [229.740895] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [229.741035] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [229.741170] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [229.741303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [229.741535] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [229.741729] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [229.741865] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [229.741998] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [229.742131] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [229.742303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [229.742530] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [229.742723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [229.742861] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [229.742999] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [229.743133] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [229.743264] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [229.745571] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [229.745702] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [229.745815] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [229.745932] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [229.746062] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global

<7> [229.746932] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [229.747066] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [229.747194] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [229.751236] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [229.751436] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [229.751614] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [229.773723] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [229.773886] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [229.774026] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [229.774165] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [229.774304] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [229.774449] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x3e920000

<7> [229.774588] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [229.774727] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [229.774864] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [229.775001] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [229.775139] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [229.775277] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [229.775420] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [229.775558] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [229.775696] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [229.776706] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [229.776709] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [229.782429] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [229.783024] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [229.783168] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [229.783170] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [229.790280] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [229.790502] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [229.790633] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [229.790761] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [229.790887] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [229.791028] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [229.791438] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [229.791542] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [229.791640] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [229.791735] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [229.793595] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [229.793847] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [229.794097] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1

<7> [229.794617] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<7> [229.794865] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:HDMI-A-3] generating connector hotplug event

<7> [229.795108] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2

<7> [229.795626] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:120:DP-2] generating connector hotplug event

<6> [229.795662] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [229.796952] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [229.809471] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [229.811193] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input59

<7> [229.811948] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [229.812414] [drm:drm_client_modeset_probe]

<7> [229.812453] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [229.812409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [229.812471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [229.812608] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [229.812627] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [229.812578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [229.812692] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [229.812704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [229.812729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [229.812834] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [229.812850] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [229.812865] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [229.812875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [229.812880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [229.813005] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [229.813021] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [229.813035] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3]

<7> [229.813045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [229.813174] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] status updated from unknown to disconnected

<7> [229.813190] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [229.813204] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2]

<7> [229.813215] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [229.813344] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] status updated from unknown to disconnected

<7> [229.813288] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [229.813360] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected

<7> [229.813373] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [229.813376] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [229.813378] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [229.813380] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [229.813392] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [229.813394] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [229.813418] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [229.813424] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [229.813436] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<7> [229.813444] i915 device info: pciid=0x3e92 rev=0x00 platform=COFFEELAKE (subplatform=0x0) gen=9

<7> [229.813447] i915 device info: graphics version: 9

<7> [229.813449] i915 device info: media version: 9

<7> [229.813450] i915 device info: display version: 9

<6> [229.813450] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [229.813452] i915 device info: graphics stepping: **

<7> [229.813454] i915 device info: media stepping: **

<7> [229.813456] i915 device info: display stepping: **

<7> [229.813458] i915 device info: base die stepping: **

<7> [229.813461] i915 device info: gt: 2

<7> [229.813463] i915 device info: memory-regions: 0x21

<7> [229.813465] i915 device info: page-sizes: 0x11000

<7> [229.813467] i915 device info: platform: COFFEELAKE

<7> [229.813469] i915 device info: ppgtt-size: 48

<7> [229.813472] i915 device info: ppgtt-type: 2

<7> [229.813474] i915 device info: dma_mask_size: 39

<7> [229.813477] i915 device info: is_mobile: no

<7> [229.813479] i915 device info: is_lp: no

<7> [229.813482] i915 device info: require_force_probe: no

<7> [229.813484] i915 device info: is_dgfx: no

<7> [229.813486] i915 device info: has_64bit_reloc: yes

<7> [229.813489] i915 device info: has_64k_pages: no

<7> [229.813491] i915 device info: gpu_reset_clobbers_display: no

<7> [229.813493] i915 device info: has_reset_engine: yes

<7> [229.813495] i915 device info: has_3d_pipeline: yes

<7> [229.813498] i915 device info: has_4tile: no

<7> [229.813500] i915 device info: has_flat_ccs: no

<7> [229.813502] i915 device info: has_global_mocs: no

<7> [229.813504] i915 device info: has_gmd_id: no

<7> [229.813521] i915 device info: has_gt_uc: yes

<7> [229.813524] i915 device info: has_heci_pxp: no

<7> [229.813526] i915 device info: has_heci_gscfi: no

<7> [229.813528] i915 device info: has_guc_deprivilege: no

<7> [229.813531] i915 device info: has_l3_ccs_read: no

<7> [229.813533] i915 device info: has_l3_dpf: no

<7> [229.813535] i915 device info: has_llc: yes

<7> [229.813538] i915 device info: has_logical_ring_contexts: yes

<7> [229.813540] i915 device info: has_logical_ring_elsq: no

<7> [229.813542] i915 device info: has_media_ratio_mode: no

<7> [229.813545] i915 device info: has_mslice_steering: no

<7> [229.813547] i915 device info: has_oa_bpc_reporting: no

<7> [229.813549] i915 device info: has_oa_slice_contrib_limits: no

<7> [229.813551] i915 device info: has_oam: no

<7> [229.813554] i915 device info: has_one_eu_per_fuse_bit: no

<7> [229.813556] i915 device info: has_pxp: no

<7> [229.813558] i915 device info: has_rc6: yes

<7> [229.813560] i915 device info: has_rc6p: no

<7> [229.813562] i915 device info: has_rps: yes

<7> [229.813564] i915 device info: has_runtime_pm: yes

<7> [229.813567] i915 device info: has_snoop: no

<7> [229.813569] i915 device info: has_coherent_ggtt: yes

<7> [229.813571] i915 device info: tuning_thread_rr_after_dep: no

<7> [229.813574] i915 device info: unfenced_needs_alignment: no

<7> [229.813576] i915 device info: hws_needs_physical: no

<7> [229.813578] i915 device info: has_pooled_eu: no

<7> [229.813580] i915 device info: cursor_needs_physical: no

<7> [229.813583] i915 device info: has_cdclk_crawl: no

<7> [229.813585] i915 device info: has_cdclk_squash: no

<7> [229.813587] i915 device info: has_ddi: yes

<7> [229.813589] i915 device info: has_dp_mst: yes

<7> [229.813592] i915 device info: has_dsb: no

<7> [229.813594] i915 device info: has_fpga_dbg: yes

<7> [229.813596] i915 device info: has_gmch: no

<7> [229.813599] i915 device info: has_hotplug: yes

<7> [229.813601] i915 device info: has_hti: no

<7> [229.813603] i915 device info: has_ipc: yes

<7> [229.813606] i915 device info: has_overlay: no

<7> [229.813608] i915 device info: has_psr: yes

<7> [229.813610] i915 device info: has_psr_hw_tracking: yes

<7> [229.813613] i915 device info: overlay_needs_physical: no

<7> [229.813615] i915 device info: supports_tv: no

<7> [229.813617] i915 device info: has_hdcp: yes

<7> [229.813620] i915 device info: has_dmc: yes

<7> [229.813639] i915 device info: has_dsc: no

<7> [229.813641] i915 device info: rawclk rate: 24000 kHz

<7> [229.813644] i915 device info: iommu: disabled

<7> [229.813646] i915 device info: available engines: 40403

<7> [229.813649] i915 device info: slice total: 1, mask=0001

<7> [229.813652] i915 device info: subslice total: 3

<7> [229.813655] i915 device info: slice0: 3 subslices, mask=00000007

<7> [229.813658] i915 device info: slice1: 0 subslices, mask=00000000

<7> [229.813660] i915 device info: slice2: 0 subslices, mask=00000000

<7> [229.813663] i915 device info: EU total: 24

<7> [229.813666] i915 device info: EU per subslice: 8

<7> [229.813668] i915 device info: has slice power gating: no

<7> [229.813671] i915 device info: has subslice power gating: no

<7> [229.813673] i915 device info: has EU power gating: yes

<6> [229.813675] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [229.813678] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [229.813681] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [229.813684] i915: Performing live selftests with st_random_seed=0x1bd78469 st_timeout=500

<6> [229.813722] i915: Running intel_uncore_live_selftests/live_fw_table

<7> [229.813953] [drm:drm_client_modeset_probe]

<7> [229.814246] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [229.814292] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [229.814555] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [229.814574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [229.814606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [229.814793] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [229.814811] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [229.814828] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [229.815011] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [229.815029] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3]

<7> [229.815046] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [229.815228] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [229.815246] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2]

<7> [229.815262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [229.815493] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected

<7> [229.815511] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [229.815519] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [229.815523] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [229.815527] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [229.815531] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [229.815534] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [229.815635] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [229.815650] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [229.815677] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [229.815703] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [229.815765] [drm:drm_client_modeset_probe]

<7> [229.815815] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [229.815833] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [229.816018] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [229.816036] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [229.816052] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [229.816238] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [229.816256] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [229.816272] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [229.816833] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [229.816847] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3]

<7> [229.816858] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [229.816987] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [229.816998] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2]

<7> [229.817009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [229.817134] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected

<7> [229.817145] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [229.817148] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [229.817151] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [229.817153] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [229.817155] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [229.817157] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [229.817177] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [229.817184] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [229.817197] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [229.817210] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [229.832472] i915: Running intel_uncore_live_selftests/live_forcewake_ops

<6> [229.832489] i915: Running intel_uncore_live_selftests/live_forcewake_domains

<7> [229.832504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [229.832722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [229.832919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [229.833116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [229.857553] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [229.901925] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [229.944715] i915: probe of 0000:00:02.0 failed with error -25

<6> [230.125281] [IGT] i915_selftest: finished subtest uncore, SUCCESS

Results for igt@i915_selftest@live@uncore