igt@i915_pm_rpm@basic-pci-d3-state on bat-mtlp-8@linus-v6.5 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g34b68fb58 (x86_64) (Linux: 6.5.0-linus-v6.5-g2dde18cd1d8f+ x86_64)
Out	Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1e9/0x740 drm_ioctl_kernel+0xb4/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa3f/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1e9/0x740 Wakeref count: 0 Starting subtest: basic-pci-d3-state Subtest basic-pci-d3-state: SUCCESS (5.172s)
Err	Starting subtest: basic-pci-d3-state Subtest basic-pci-d3-state: SUCCESS (5.172s)
Dmesg	<6> [382.001765] Console: switching to colour dummy device 80x25 <6> [382.004603] [IGT] i915_pm_rpm: executing <7> [382.033571] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [382.037513] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7> [382.037657] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7> [382.040387] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [382.040818] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [382.042126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [382.042628] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7> [382.043136] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7> [382.043467] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7> [382.043911] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [382.043943] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7> [382.043962] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7> [382.044036] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7> [382.044630] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [382.046831] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [382.047255] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [382.048641] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7> [382.048685] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7> [382.048935] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7> [382.048974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7> [382.049382] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7> [382.049570] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7> [382.049620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7> [382.050319] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7> [382.050779] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7> [382.050856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7> [382.051996] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7> [382.052505] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:DP-3] <7> [382.052596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3] <7> [382.053853] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:DP-3] disconnected <7> [382.054378] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-4] <7> [382.054472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4] <7> [382.055894] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-4] disconnected <7> [382.056422] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-5] <7> [382.056512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5] <7> [382.057689] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-5] disconnected <7> [382.116673] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7> [382.116899] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7> [382.118204] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7> [382.122141] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7> [382.122254] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7> [382.123513] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7> [382.127459] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7> [382.127562] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7> [382.128937] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7> [382.132753] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:DP-3] <7> [382.132862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3] <7> [382.134088] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:DP-3] disconnected <7> [382.137943] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-4] <7> [382.138042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4] <7> [382.139283] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-4] disconnected <7> [382.143171] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-5] <7> [382.143267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5] <7> [382.144492] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-5] disconnected <7> [382.149412] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7> [382.149508] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7> [382.152013] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [382.152444] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [382.153831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [382.154153] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7> [382.154473] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7> [382.154832] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7> [382.155362] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [382.155386] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7> [382.155403] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7> [382.155460] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7> [382.156227] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [382.158540] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [382.159023] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [382.160449] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7> [382.160521] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7> [382.160621] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7> [382.160667] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7> [382.161207] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7> [382.161295] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7> [382.161340] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7> [382.161769] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7> [382.161838] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7> [382.161873] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7> [382.162373] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7> [382.162475] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:DP-3] <7> [382.162527] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3] <7> [382.163365] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:DP-3] disconnected <7> [382.163509] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-4] <7> [382.163580] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4] <7> [382.164656] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-4] disconnected <7> [382.164890] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-5] <7> [382.164976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5] <7> [382.166081] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-5] disconnected <7> [382.167529] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:300] <7> [382.184163] [drm:eb_lookup_vmas [i915]] EINVAL at eb_validate_vma:508 <7> [382.186940] [drm:eb_lookup_vmas [i915]] EINVAL at eb_validate_vma:508 <7> [382.454514] [drm:eb_lookup_vmas [i915]] EINVAL at eb_validate_vma:508 <7> [382.456566] [drm:eb_lookup_vmas [i915]] EINVAL at eb_validate_vma:508 <7> [383.484198] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [383.484794] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [383.486116] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [383.487364] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [383.488560] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [383.489819] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0) <7> [383.490985] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [383.492181] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [383.493345] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [383.494588] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [383.495792] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [383.496908] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [383.498189] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [383.499339] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [383.500479] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [383.501643] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0) <7> [383.502954] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [383.504069] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0) <7> [383.505254] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [383.506411] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [383.507533] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [383.508699] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [383.510038] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [383.511187] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [383.512323] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [383.513469] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [383.514637] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [383.515936] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0) <7> [383.517031] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [383.518159] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0) <7> [383.519283] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [383.520407] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [383.521516] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [383.522688] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [383.523855] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [383.524943] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [383.526014] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0) <7> [383.527145] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0) <7> [383.528370] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [383.529486] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [383.531106] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [383.532157] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [383.533372] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0 <7> [383.534398] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb (4001 - 4096) -> ( 0 - 0), size 95 -> 0 <7> [383.535401] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [383.536410] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [383.537417] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [383.538417] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [383.539435] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0 <7> [383.540601] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 0 qgv_peak_bw: 51200 <7> [383.541800] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 0 qgv_peak_bw: 51200 <7> [383.542889] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 28357 required 0 qgv_peak_bw: 51200 <7> [383.544157] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 0 qgv_peak_bw: 51200 <7> [383.545314] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0 <7> [383.546587] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Can change cdclk via squashing <7> [383.548222] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [383.549402] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [383.550905] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [modeset] <7> [383.552030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [383.553176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [383.554363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [383.555497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [383.556644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [383.558096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7> [383.560197] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2 <7> [383.563228] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [383.768860] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7> [383.771108] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [383.773509] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7> [383.773619] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7> [383.774067] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI A/PHY A] - short <7> [383.774211] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7> [383.774681] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [383.825451] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [383.826603] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [383.826642] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:235:DDI A/PHY A] <7> [383.826833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [383.827615] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI A/PHY A] - long <7> [383.828062] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 172800 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [383.828475] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [383.829339] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI A/PHY A] <7> [383.829170] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=432 <7> [383.830464] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7> [383.831797] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7> [383.832842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7> [383.833871] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7> [383.834895] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7> [383.836056] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7> [383.837093] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7> [383.838135] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7> [383.839180] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7> [383.840557] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7> [383.841984] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7> [383.843097] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7> [383.844145] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:273:DP-MST A] <7> [383.845247] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST B] <7> [383.846358] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST C] <7> [383.847466] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST D] <7> [383.848492] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DDI TC3/PHY TC3] <7> [383.849512] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:282:DP-MST A] <7> [383.850937] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST B] <7> [383.852247] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST C] <7> [383.853410] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST D] <7> [383.854448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DDI TC4/PHY TC4] <7> [383.855475] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DP-MST A] <7> [383.856518] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DP-MST B] <7> [383.857624] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:293:DP-MST C] <7> [383.858668] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DP-MST D] <7> [383.859698] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7> [383.861326] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [383.863028] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [383.864357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A <7> [383.865649] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7> [383.867100] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x2000010 0xad00071) <7> [383.868302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [383.869474] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [383.870614] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [383.872657] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [383.873919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [383.875275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [383.876821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [383.878197] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [383.879335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [383.880917] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [383.881590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [383.883218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [383.884906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [383.886033] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [383.887154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [383.888346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [383.892493] [drm:drm_mode_setcrtc] [CRTC:233:pipe D] <7> [383.892198] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [383.901056] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [383.904441] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT1: GUC: communication disabled <7> [383.906871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [383.909188] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [383.911607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [383.913223] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [383.914663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [383.918465] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [383.946549] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [383.947338] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [383.948579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [383.949876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [383.951145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [383.952462] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [383.953801] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [383.955189] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [383.956585] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [383.968737] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [383.969818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [383.980812] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [383.986063] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7> [383.990002] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [383.990996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [383.992258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [383.993697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [383.996018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [383.997314] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [383.998504] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [383.999784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [384.000995] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [384.002160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7> [384.003111] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [384.004005] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT1: GUC: communication disabled <7> [384.005375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [384.007368] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [384.009030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [384.010196] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [384.011303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [384.012523] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [384.042100] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [384.043171] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [384.044413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [384.045754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [384.047065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [384.048684] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [384.049929] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [384.051789] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [384.053098] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [384.065581] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [384.066788] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [384.078419] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [384.083303] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7> [384.085538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [384.086871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [384.088035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [384.089391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [384.090858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [384.094074] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7> [384.095288] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [384.432970] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [384.433963] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [384.435013] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [384.435964] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [384.466584] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [384.467626] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI A/PHY A] - long <7> [384.468684] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [384.469783] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI A/PHY A] <7> [384.643398] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [384.643955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [384.645357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [384.645699] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7> [384.646073] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7> [384.646398] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7> [384.647357] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [384.647393] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7> [384.647417] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7> [384.647566] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7> [384.648501] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [384.651091] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [384.651496] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [384.652978] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:eDP-1] Same epoch counter 1 <7> [384.653089] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7> [384.654194] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:245:DP-1] Same epoch counter 1 <7> [384.654242] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7> [384.654652] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] Same epoch counter 5 <7> [384.654692] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7> [384.655526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:263:DP-2] Same epoch counter 1 <7> [384.655590] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3] <7> [384.656573] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:272:DP-3] Same epoch counter 1 <7> [384.656686] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4] <7> [384.657921] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:281:DP-4] Same epoch counter 1 <7> [384.658030] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5] <7> [384.659129] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:290:DP-5] Same epoch counter 1 <7> [384.659277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7> [384.661682] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [384.662108] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [384.663315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [384.663620] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7> [384.664037] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7> [384.664414] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7> [384.665051] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [384.665084] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7> [384.665111] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7> [384.665200] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7> [384.665998] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [384.668350] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [384.668758] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [384.670079] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:eDP-1] Same epoch counter 1 <7> [384.670150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7> [384.670730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:245:DP-1] Same epoch counter 1 <7> [384.670778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7> [384.671197] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] Same epoch counter 5 <7> [384.671242] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7> [384.671660] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:263:DP-2] Same epoch counter 1 <7> [384.671699] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3] <7> [384.672182] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:272:DP-3] Same epoch counter 1 <7> [384.672254] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4] <7> [384.673030] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:281:DP-4] Same epoch counter 1 <7> [384.673113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5] <7> [384.674102] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:290:DP-5] Same epoch counter 1 <7> [387.672865] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7> [387.673941] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [387.674985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [387.676203] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [387.677386] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI A/PHY A] - long <7> [387.677759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [387.678282] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [387.678783] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [387.679478] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI A/PHY A] <7> [387.679868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [387.680810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [387.682667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [387.684351] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [387.685444] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT1: GUC: communication disabled <7> [387.687111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [387.689061] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [387.690577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [387.691810] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [387.692851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [387.694036] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [387.714973] [IGT] i915_pm_rpm: starting subtest basic-pci-d3-state <7> [388.507212] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [388.520916] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [388.521528] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [388.522823] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [388.524189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [388.525603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [388.526929] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [388.528195] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [388.529814] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [388.531135] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [388.543605] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [388.544849] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [388.551564] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [388.554022] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7> [388.556229] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [388.557182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [388.558419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [388.559803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [388.561242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [388.562402] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [388.563534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [388.564810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [388.565980] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [388.567506] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [388.568074] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [388.568692] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT1: GUC: communication disabled <7> [388.570287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [388.572317] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [388.573833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [388.575056] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [388.576234] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [388.577552] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [388.604370] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [388.605113] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [388.606360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [388.607618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [388.608921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [388.610119] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [388.611289] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [388.612662] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [388.613970] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [388.626247] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [388.627347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [388.632546] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [388.634890] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7> [388.636604] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [388.637696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [388.638786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [388.639782] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [388.640933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [388.641899] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [388.642942] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [388.644057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [388.645228] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [388.646734] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [388.647262] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [388.647209] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7> [388.647765] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT1: GUC: communication disabled <7> [388.649207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [388.650972] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [388.652369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [388.653512] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [388.654599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [388.655601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [388.681121] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [388.682050] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [388.683315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [388.684694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [388.686115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [388.687404] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [388.688647] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [388.690284] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [388.691779] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [388.705014] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [388.706313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [388.712862] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [388.715428] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7> [388.717311] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [388.718125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [388.719307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [388.720860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [388.722276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [388.724934] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7> [388.725906] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [388.727004] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [388.727989] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [388.729032] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [388.730006] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [388.760597] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [388.761610] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI A/PHY A] - long <7> [388.762667] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [388.763776] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI A/PHY A] <7> [388.938258] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [388.938676] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [388.940046] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [388.940432] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7> [388.940811] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7> [388.941196] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7> [388.941807] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [388.941848] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7> [388.941878] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7> [388.941983] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7> [388.942760] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [388.945454] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [388.945875] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [388.947273] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:eDP-1] Same epoch counter 1 <7> [388.947325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7> [388.947771] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:245:DP-1] Same epoch counter 1 <7> [388.948191] [drm:drm_mode_setcrtc] [CRTC:233:pipe D] <7> [388.948188] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7> [388.948869] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] Same epoch counter 5 <7> [388.949566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7> [388.950680] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:263:DP-2] Same epoch counter 1 <7> [388.950862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3] <7> [388.952045] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:272:DP-3] Same epoch counter 1 <7> [388.952157] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4] <7> [388.953290] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:281:DP-4] Same epoch counter 1 <7> [388.953399] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5] <7> [388.954532] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:290:DP-5] Same epoch counter 1 <7> [388.954688] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7> [388.957337] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [388.957694] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [388.959279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [388.959633] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7> [388.960058] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7> [388.960448] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7> [388.960929] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [388.960967] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7> [388.960996] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7> [388.961099] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7> [388.961763] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [388.964342] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [388.964757] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [388.966093] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:eDP-1] Same epoch counter 1 <7> [388.966167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7> [388.966661] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:245:DP-1] Same epoch counter 1 <7> [388.966742] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7> [388.967171] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] Same epoch counter 5 <7> [388.967215] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7> [388.967626] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:263:DP-2] Same epoch counter 1 <7> [388.967665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3] <7> [388.968334] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:272:DP-3] Same epoch counter 1 <7> [388.968407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4] <7> [388.969333] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:281:DP-4] Same epoch counter 1 <7> [388.969439] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5] <7> [388.970815] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:290:DP-5] Same epoch counter 1 <7> [392.024872] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7> [392.026016] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [392.027038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [392.028248] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [392.028511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [392.029456] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI A/PHY A] - long <7> [392.029844] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [392.030537] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [392.030998] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [392.031825] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI A/PHY A] <7> [392.032344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [392.033933] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [392.035454] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [392.036606] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT1: GUC: communication disabled <7> [392.038428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [392.040437] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [392.053966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [392.055235] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [392.056407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [392.057675] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [392.154463] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [392.154689] [drm:drm_mode_setcrtc] [CONNECTOR:236:eDP-1] <7> [392.155451] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [392.157453] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7> [392.158863] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7> [392.160284] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7> [392.161224] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7> [392.162115] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [392.163256] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7> [392.164243] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [392.165386] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [392.166486] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [392.167622] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [392.168756] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288) <7> [392.169856] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [392.170933] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [392.171974] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [392.173135] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [392.174381] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [392.175537] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [392.176699] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [392.177965] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [392.179107] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [392.180216] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878) <7> [392.181317] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [392.182457] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878) <7> [392.183602] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [392.184749] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [392.185870] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [392.186926] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [392.187996] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [392.189078] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [392.190160] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [392.191237] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [392.192448] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [392.193540] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878) <7> [392.194673] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [392.195814] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878) <7> [392.196879] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [392.197933] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [392.198970] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [392.200039] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [392.201100] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [392.202168] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [392.203240] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820) <7> [392.204317] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820) <7> [392.205367] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [392.206283] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [392.207611] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [392.208661] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [392.209924] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7> [392.210876] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7> [392.211804] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [392.212744] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 <7> [392.213635] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 <7> [392.214650] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 <7> [392.215651] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7> [392.216826] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 2159 qgv_peak_bw: 51200 <7> [392.217896] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 2159 qgv_peak_bw: 51200 <7> [392.218945] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 28357 required 2159 qgv_peak_bw: 51200 <7> [392.219990] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 2159 qgv_peak_bw: 51200 <7> [392.221048] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7> [392.222208] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (256910 kHz) > [CRTC:80:pipe A] min cdclk (0 kHz) <7> [392.223323] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7> [392.224456] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Can change cdclk via squashing <7> [392.225545] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz <7> [392.226856] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [392.228040] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7> [392.229116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [392.230184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [392.231273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [392.232354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [392.233436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [392.234502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [392.235584] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7> [392.236766] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [392.237941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [392.238998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [392.240047] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7> [392.240067] i915 0000:00:02.0: pixelformat: RGB <7> [392.240081] i915 0000:00:02.0: colorimetry: sRGB <7> [392.240097] i915 0000:00:02.0: bpc: 0 <7> [392.240112] i915 0000:00:02.0: dynamic range: VESA range <7> [392.240127] i915 0000:00:02.0: content type: Not defined <7> [392.240143] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7> [392.241199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7> [392.242286] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7> [392.243371] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7> [392.244447] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7> [392.245526] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7> [392.246626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7> [392.247752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7> [392.248790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [392.249830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [392.250862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [392.251905] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7> [392.253032] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [392.254114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [392.255222] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [392.256306] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [392.257404] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [392.258496] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [392.259611] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [392.260759] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [392.261824] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [392.262865] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [392.263877] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [392.265024] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [392.266079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:300] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [392.267156] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [392.268218] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [392.269314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [392.270397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [392.271461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [392.272540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [392.273627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7> [392.287780] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [392.288374] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [392.289479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [392.290655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [392.291899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [392.293060] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [392.294167] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [392.295515] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [392.296827] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [392.308806] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [392.309846] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [392.315596] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [392.318001] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7> [392.320020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [392.329866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [392.331114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [392.332457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [392.334014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7> [392.335348] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x2000071 0x13421c72) <7> [392.336627] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [392.337959] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=768 <7> [392.339119] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7> [392.340161] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7> [392.341213] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7> [392.342248] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7> [392.343255] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7> [392.344256] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7> [392.345364] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7> [392.346370] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7> [392.347363] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7> [392.348277] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7> [392.349141] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7> [392.350127] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7> [392.351087] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:273:DP-MST A] <7> [392.352039] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST B] <7> [392.352963] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST C] <7> [392.353894] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST D] <7> [392.354831] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DDI TC3/PHY TC3] <7> [392.355874] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:282:DP-MST A] <7> [392.356804] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST B] <7> [392.357730] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST C] <7> [392.358628] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST D] <7> [392.359641] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DDI TC4/PHY TC4] <7> [392.360636] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DP-MST A] <7> [392.361633] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DP-MST B] <7> [392.362781] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:293:DP-MST C] <7> [392.363677] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DP-MST D] <7> [392.364779] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [392.366068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [392.368582] i915 0000:00:02.0: [drm:intel_dp_128b132b_sdp_crc16 [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] DP2.0 SDP CRC16 for 128b/132b enabled <7> [392.369615] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7> [392.370588] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [392.632929] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [392.633848] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [392.634792] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7> [392.635739] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [392.666392] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [392.667442] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI A/PHY A] - long <7> [392.668502] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [392.669596] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI A/PHY A] <7> [392.835107] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [392.838372] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7> [392.839405] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [392.843597] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7> [392.844430] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [392.845865] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7> [392.847739] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [392.848548] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [392.850822] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7> [392.851152] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7> [392.853644] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [392.854002] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [392.855072] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [392.855793] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [392.856143] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [392.856526] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7> [392.867023] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [392.868311] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7> [392.871595] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7> [392.872076] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7> [392.873430] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7> [392.874162] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7> [392.875096] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7> [392.876025] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7> [392.876947] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7> [392.877857] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7> [392.878788] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [392.879646] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [392.880586] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7> [392.881506] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7> [392.882525] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7> [392.885444] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7> [392.887970] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [392.888384] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <6> [392.888825] [IGT] i915_pm_rpm: finished subtest basic-pci-d3-state, SUCCESS <7> [392.889500] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:300] from all active usage due to RMFB ioctl <7> [392.889831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [392.890310] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7> [392.890654] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7> [392.891034] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7> [392.891383] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [392.891400] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7> [392.891412] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7> [392.891449] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7> [392.891792] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [392.893949] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [392.894375] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [392.895967] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:eDP-1] Same epoch counter 1 <7> [392.896027] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:300] is removed <7> [392.896133] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0 <7> [392.896528] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [392.897043] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [392.897679] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [392.898397] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [392.899357] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0 <7> [392.900594] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 0 qgv_peak_bw: 51200 <7> [392.901829] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 0 qgv_peak_bw: 51200 <7> [392.903141] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 28357 required 0 qgv_peak_bw: 51200 <7> [392.904347] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 0 qgv_peak_bw: 51200 <7> [392.905503] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0 <7> [392.907299] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2 <7> [392.934206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7> [392.935327] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:245:DP-1] Same epoch counter 1 <7> [392.935446] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7> [392.936509] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] Same epoch counter 5 <7> [392.936605] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7> [392.937544] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:263:DP-2] Same epoch counter 1 <7> [392.938293] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7> [392.939201] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [392.940142] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 <7> [392.941168] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 <7> [392.942148] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 <7> [392.943160] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7> [392.944340] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 2159 qgv_peak_bw: 51200 <7> [392.945466] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 2159 qgv_peak_bw: 51200 <7> [392.946608] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 28357 required 2159 qgv_peak_bw: 51200 <7> [392.947663] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 2159 qgv_peak_bw: 51200 <7> [392.948577] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7> [392.955971] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7> [392.959871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3] <7> [392.960321] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:272:DP-3] Same epoch counter 1 <7> [392.960368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4] <7> [392.960841] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:281:DP-4] Same epoch counter 1 <7> [392.960886] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5] <7> [392.961483] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:290:DP-5] Same epoch counter 1 <6> [392.961868] [IGT] i915_pm_rpm: exiting, ret=0 <6> [392.979584] Console: switching to colour frame buffer device 360x112

<6> [382.001765] Console: switching to colour dummy device 80x25

<6> [382.004603] [IGT] i915_pm_rpm: executing

<7> [382.033571] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [382.037513] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1]

<7> [382.037657] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]

<7> [382.040387] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [382.040818] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [382.042126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [382.042628] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000

<7> [382.043136] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000

<7> [382.043467] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000

<7> [382.043911] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [382.043943] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor

<7> [382.043962] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0

<7> [382.044036] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no

<7> [382.044630] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [382.046831] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [382.047255] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [382.048641] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes :

<7> [382.048685] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa

<7> [382.048935] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1]

<7> [382.048974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]

<7> [382.049382] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected

<7> [382.049570] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1]

<7> [382.049620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]

<7> [382.050319] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected

<7> [382.050779] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2]

<7> [382.050856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2]

<7> [382.051996] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected

<7> [382.052505] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:DP-3]

<7> [382.052596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3]

<7> [382.053853] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:DP-3] disconnected

<7> [382.054378] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-4]

<7> [382.054472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4]

<7> [382.055894] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-4] disconnected

<7> [382.056422] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-5]

<7> [382.056512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5]

<7> [382.057689] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-5] disconnected

<7> [382.116673] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1]

<7> [382.116899] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]

<7> [382.118204] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected

<7> [382.122141] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1]

<7> [382.122254] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]

<7> [382.123513] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected

<7> [382.127459] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2]

<7> [382.127562] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2]

<7> [382.128937] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected

<7> [382.132753] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:DP-3]

<7> [382.132862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3]

<7> [382.134088] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:DP-3] disconnected

<7> [382.137943] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-4]

<7> [382.138042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4]

<7> [382.139283] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-4] disconnected

<7> [382.143171] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-5]

<7> [382.143267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5]

<7> [382.144492] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-5] disconnected

<7> [382.149412] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1]

<7> [382.149508] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]

<7> [382.152013] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [382.152444] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [382.153831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [382.154153] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000

<7> [382.154473] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000

<7> [382.154832] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000

<7> [382.155362] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [382.155386] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor

<7> [382.155403] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0

<7> [382.155460] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no

<7> [382.156227] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [382.158540] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [382.159023] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [382.160449] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes :

<7> [382.160521] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa

<7> [382.160621] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1]

<7> [382.160667] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]

<7> [382.161207] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected

<7> [382.161295] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1]

<7> [382.161340] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]

<7> [382.161769] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected

<7> [382.161838] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2]

<7> [382.161873] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2]

<7> [382.162373] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected

<7> [382.162475] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:DP-3]

<7> [382.162527] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3]

<7> [382.163365] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:DP-3] disconnected

<7> [382.163509] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-4]

<7> [382.163580] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4]

<7> [382.164656] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-4] disconnected

<7> [382.164890] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-5]

<7> [382.164976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5]

<7> [382.166081] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-5] disconnected

<7> [382.167529] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:300]

<7> [382.184163] [drm:eb_lookup_vmas [i915]] EINVAL at eb_validate_vma:508

<7> [382.186940] [drm:eb_lookup_vmas [i915]] EINVAL at eb_validate_vma:508

<7> [382.454514] [drm:eb_lookup_vmas [i915]] EINVAL at eb_validate_vma:508

<7> [382.456566] [drm:eb_lookup_vmas [i915]] EINVAL at eb_validate_vma:508

<7> [383.484198] [drm:drm_mode_setcrtc] [CRTC:80:pipe A]

<7> [383.484794] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [383.486116] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [383.487364] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [383.488560] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [383.489819] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)

<7> [383.490985] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [383.492181] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [383.493345] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [383.494588] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [383.495792] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [383.496908] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [383.498189] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [383.499339] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [383.500479] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [383.501643] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)

<7> [383.502954] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [383.504069] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)

<7> [383.505254] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [383.506411] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [383.507533] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [383.508699] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [383.510038] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [383.511187] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [383.512323] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [383.513469] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [383.514637] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [383.515936] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)

<7> [383.517031] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [383.518159] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)

<7> [383.519283] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [383.520407] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [383.521516] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [383.522688] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [383.523855] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [383.524943] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [383.526014] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)

<7> [383.527145] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)

<7> [383.528370] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [383.529486] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [383.531106] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [383.532157] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [383.533372] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0

<7> [383.534398] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb (4001 - 4096) -> ( 0 - 0), size 95 -> 0

<7> [383.535401] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [383.536410] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [383.537417] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [383.538417] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [383.539435] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0

<7> [383.540601] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 0 qgv_peak_bw: 51200

<7> [383.541800] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 0 qgv_peak_bw: 51200

<7> [383.542889] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 28357 required 0 qgv_peak_bw: 51200

<7> [383.544157] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 0 qgv_peak_bw: 51200

<7> [383.545314] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0

<7> [383.546587] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Can change cdclk via squashing

<7> [383.548222] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [383.549402] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [383.550905] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [modeset]

<7> [383.552030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [383.553176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [383.554363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [383.555497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [383.556644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [383.558096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no

<7> [383.560197] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2

<7> [383.563228] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [383.768860] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0

<7> [383.771108] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [383.773509] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000

<7> [383.773619] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off

<7> [383.774067] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI A/PHY A] - short

<7> [383.774211] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [383.774681] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [383.825451] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [383.826603] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [383.826642] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:235:DDI A/PHY A]

<7> [383.826833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [383.827615] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI A/PHY A] - long

<7> [383.828062] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 172800 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [383.828475] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [383.829339] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI A/PHY A]

<7> [383.829170] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=432

<7> [383.830464] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A]

<7> [383.831797] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B]

<7> [383.832842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A]

<7> [383.833871] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B]

<7> [383.834895] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C]

<7> [383.836056] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D]

<7> [383.837093] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1]

<7> [383.838135] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A]

<7> [383.839180] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B]

<7> [383.840557] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C]

<7> [383.841984] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D]

<7> [383.843097] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2]

<7> [383.844145] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:273:DP-MST A]

<7> [383.845247] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST B]

<7> [383.846358] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST C]

<7> [383.847466] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST D]

<7> [383.848492] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DDI TC3/PHY TC3]

<7> [383.849512] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:282:DP-MST A]

<7> [383.850937] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST B]

<7> [383.852247] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST C]

<7> [383.853410] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST D]

<7> [383.854448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DDI TC4/PHY TC4]

<7> [383.855475] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DP-MST A]

<7> [383.856518] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DP-MST B]

<7> [383.857624] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:293:DP-MST C]

<7> [383.858668] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DP-MST D]

<7> [383.859698] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1]

<7> [383.861326] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [383.863028] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [383.864357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A

<7> [383.865649] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A]

<7> [383.867100] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x2000010 0xad00071)

<7> [383.868302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [383.869474] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [383.870614] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [383.872657] [drm:drm_mode_setcrtc] [CRTC:131:pipe B]

<7> [383.873919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [383.875275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [383.876821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [383.878197] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [383.879335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [383.880917] [drm:drm_mode_setcrtc] [CRTC:182:pipe C]

<7> [383.881590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [383.883218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [383.884906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [383.886033] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [383.887154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [383.888346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [383.892493] [drm:drm_mode_setcrtc] [CRTC:233:pipe D]

<7> [383.892198] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [383.901056] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [383.904441] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT1: GUC: communication disabled

<7> [383.906871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [383.909188] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [383.911607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [383.913223] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [383.914663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [383.918465] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [383.946549] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [383.947338] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [383.948579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [383.949876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [383.951145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [383.952462] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [383.953801] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [383.955189] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [383.956585] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [383.968737] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [383.969818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [383.980812] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [383.986063] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled

<7> [383.990002] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [383.990996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [383.992258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [383.993697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [383.996018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [383.997314] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [383.998504] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [383.999784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [384.000995] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [384.002160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]

<7> [384.003111] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [384.004005] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT1: GUC: communication disabled

<7> [384.005375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [384.007368] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [384.009030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [384.010196] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [384.011303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [384.012523] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [384.042100] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [384.043171] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [384.044413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [384.045754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [384.047065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [384.048684] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [384.049929] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [384.051789] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [384.053098] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [384.065581] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [384.066788] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [384.078419] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [384.083303] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled

<7> [384.085538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [384.086871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [384.088035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [384.089391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [384.090858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [384.094074] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on

<7> [384.095288] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [384.432970] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [384.433963] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [384.435013] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [384.435964] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [384.466584] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [384.467626] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI A/PHY A] - long

<7> [384.468684] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [384.469783] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI A/PHY A]

<7> [384.643398] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [384.643955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [384.645357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [384.645699] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000

<7> [384.646073] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000

<7> [384.646398] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000

<7> [384.647357] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [384.647393] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor

<7> [384.647417] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0

<7> [384.647566] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no

<7> [384.648501] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [384.651091] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [384.651496] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [384.652978] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:eDP-1] Same epoch counter 1

<7> [384.653089] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]

<7> [384.654194] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:245:DP-1] Same epoch counter 1

<7> [384.654242] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]

<7> [384.654652] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] Same epoch counter 5

<7> [384.654692] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2]

<7> [384.655526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:263:DP-2] Same epoch counter 1

<7> [384.655590] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3]

<7> [384.656573] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:272:DP-3] Same epoch counter 1

<7> [384.656686] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4]

<7> [384.657921] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:281:DP-4] Same epoch counter 1

<7> [384.658030] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5]

<7> [384.659129] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:290:DP-5] Same epoch counter 1

<7> [384.659277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]

<7> [384.661682] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [384.662108] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [384.663315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [384.663620] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000

<7> [384.664037] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000

<7> [384.664414] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000

<7> [384.665051] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [384.665084] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor

<7> [384.665111] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0

<7> [384.665200] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no

<7> [384.665998] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [384.668350] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [384.668758] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [384.670079] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:eDP-1] Same epoch counter 1

<7> [384.670150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]

<7> [384.670730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:245:DP-1] Same epoch counter 1

<7> [384.670778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]

<7> [384.671197] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] Same epoch counter 5

<7> [384.671242] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2]

<7> [384.671660] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:263:DP-2] Same epoch counter 1

<7> [384.671699] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3]

<7> [384.672182] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:272:DP-3] Same epoch counter 1

<7> [384.672254] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4]

<7> [384.673030] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:281:DP-4] Same epoch counter 1

<7> [384.673113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5]

<7> [384.674102] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:290:DP-5] Same epoch counter 1

<7> [387.672865] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off

<7> [387.673941] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [387.674985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [387.676203] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [387.677386] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI A/PHY A] - long

<7> [387.677759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [387.678282] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [387.678783] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [387.679478] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI A/PHY A]

<7> [387.679868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [387.680810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [387.682667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [387.684351] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [387.685444] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT1: GUC: communication disabled

<7> [387.687111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [387.689061] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [387.690577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [387.691810] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [387.692851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [387.694036] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [387.714973] [IGT] i915_pm_rpm: starting subtest basic-pci-d3-state

<7> [388.507212] [drm:drm_mode_setcrtc] [CRTC:80:pipe A]

<7> [388.520916] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [388.521528] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [388.522823] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [388.524189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [388.525603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [388.526929] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [388.528195] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [388.529814] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [388.531135] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [388.543605] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [388.544849] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [388.551564] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [388.554022] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled

<7> [388.556229] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [388.557182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [388.558419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [388.559803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [388.561242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [388.562402] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [388.563534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [388.564810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [388.565980] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [388.567506] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [388.568074] [drm:drm_mode_setcrtc] [CRTC:131:pipe B]

<7> [388.568692] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT1: GUC: communication disabled

<7> [388.570287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [388.572317] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [388.573833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [388.575056] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [388.576234] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [388.577552] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [388.604370] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [388.605113] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [388.606360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [388.607618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [388.608921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [388.610119] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [388.611289] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [388.612662] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [388.613970] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [388.626247] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [388.627347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [388.632546] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [388.634890] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled

<7> [388.636604] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [388.637696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [388.638786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [388.639782] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [388.640933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [388.641899] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [388.642942] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [388.644057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [388.645228] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [388.646734] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [388.647262] [drm:drm_mode_setcrtc] [CRTC:182:pipe C]

<7> [388.647209] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]

<7> [388.647765] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT1: GUC: communication disabled

<7> [388.649207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [388.650972] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [388.652369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [388.653512] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [388.654599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [388.655601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [388.681121] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [388.682050] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [388.683315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [388.684694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [388.686115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [388.687404] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [388.688647] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [388.690284] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [388.691779] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [388.705014] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [388.706313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [388.712862] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [388.715428] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled

<7> [388.717311] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [388.718125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [388.719307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [388.720860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [388.722276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [388.724934] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on

<7> [388.725906] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [388.727004] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [388.727989] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [388.729032] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [388.730006] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [388.760597] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [388.761610] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI A/PHY A] - long

<7> [388.762667] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [388.763776] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI A/PHY A]

<7> [388.938258] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [388.938676] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [388.940046] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [388.940432] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000

<7> [388.940811] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000

<7> [388.941196] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000

<7> [388.941807] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [388.941848] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor

<7> [388.941878] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0

<7> [388.941983] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no

<7> [388.942760] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [388.945454] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [388.945875] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [388.947273] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:eDP-1] Same epoch counter 1

<7> [388.947325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]

<7> [388.947771] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:245:DP-1] Same epoch counter 1

<7> [388.948191] [drm:drm_mode_setcrtc] [CRTC:233:pipe D]

<7> [388.948188] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]

<7> [388.948869] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] Same epoch counter 5

<7> [388.949566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2]

<7> [388.950680] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:263:DP-2] Same epoch counter 1

<7> [388.950862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3]

<7> [388.952045] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:272:DP-3] Same epoch counter 1

<7> [388.952157] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4]

<7> [388.953290] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:281:DP-4] Same epoch counter 1

<7> [388.953399] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5]

<7> [388.954532] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:290:DP-5] Same epoch counter 1

<7> [388.954688] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]

<7> [388.957337] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [388.957694] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [388.959279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [388.959633] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000

<7> [388.960058] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000

<7> [388.960448] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000

<7> [388.960929] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [388.960967] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor

<7> [388.960996] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0

<7> [388.961099] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no

<7> [388.961763] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [388.964342] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [388.964757] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [388.966093] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:eDP-1] Same epoch counter 1

<7> [388.966167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]

<7> [388.966661] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:245:DP-1] Same epoch counter 1

<7> [388.966742] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]

<7> [388.967171] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] Same epoch counter 5

<7> [388.967215] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2]

<7> [388.967626] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:263:DP-2] Same epoch counter 1

<7> [388.967665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3]

<7> [388.968334] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:272:DP-3] Same epoch counter 1

<7> [388.968407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4]

<7> [388.969333] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:281:DP-4] Same epoch counter 1

<7> [388.969439] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5]

<7> [388.970815] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:290:DP-5] Same epoch counter 1

<7> [392.024872] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off

<7> [392.026016] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [392.027038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [392.028248] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [392.028511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [392.029456] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI A/PHY A] - long

<7> [392.029844] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [392.030537] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [392.030998] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [392.031825] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI A/PHY A]

<7> [392.032344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [392.033933] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [392.035454] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [392.036606] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT1: GUC: communication disabled

<7> [392.038428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [392.040437] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [392.053966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [392.055235] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [392.056407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [392.057675] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [392.154463] [drm:drm_mode_setcrtc] [CRTC:80:pipe A]

<7> [392.154689] [drm:drm_mode_setcrtc] [CONNECTOR:236:eDP-1]

<7> [392.155451] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [392.157453] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz

<7> [392.158863] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30

<7> [392.160284] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000

<7> [392.161224] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no

<7> [392.162115] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [392.163256] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A]

<7> [392.164243] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [392.165386] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [392.166486] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [392.167622] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [392.168756] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)

<7> [392.169856] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [392.170933] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [392.171974] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [392.173135] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [392.174381] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [392.175537] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [392.176699] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [392.177965] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [392.179107] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [392.180216] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)

<7> [392.181317] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [392.182457] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)

<7> [392.183602] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [392.184749] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [392.185870] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [392.186926] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [392.187996] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [392.189078] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [392.190160] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [392.191237] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [392.192448] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [392.193540] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)

<7> [392.194673] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [392.195814] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)

<7> [392.196879] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [392.197933] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [392.198970] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [392.200039] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [392.201100] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [392.202168] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [392.203240] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)

<7> [392.204317] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)

<7> [392.205367] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [392.206283] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [392.207611] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [392.208661] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [392.209924] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001

<7> [392.210876] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95

<7> [392.211804] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [392.212744] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0

<7> [392.213635] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87

<7> [392.214650] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88

<7> [392.215651] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1

<7> [392.216826] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 2159 qgv_peak_bw: 51200

<7> [392.217896] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 2159 qgv_peak_bw: 51200

<7> [392.218945] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 28357 required 2159 qgv_peak_bw: 51200

<7> [392.219990] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 2159 qgv_peak_bw: 51200

<7> [392.221048] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159

<7> [392.222208] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (256910 kHz) > [CRTC:80:pipe A] min cdclk (0 kHz)

<7> [392.223323] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz)

<7> [392.224456] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Can change cdclk via squashing

<7> [392.225545] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz

<7> [392.226856] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [392.228040] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset]

<7> [392.229116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [392.230184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [392.231273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [392.232354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [392.233436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [392.234502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [392.235584] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64

<7> [392.236766] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [392.237941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [392.238998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [392.240047] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0

<7> [392.240067] i915 0000:00:02.0: pixelformat: RGB

<7> [392.240081] i915 0000:00:02.0: colorimetry: sRGB

<7> [392.240097] i915 0000:00:02.0: bpc: 0

<7> [392.240112] i915 0000:00:02.0: dynamic range: VESA range

<7> [392.240127] i915 0000:00:02.0: content type: Not defined

<7> [392.240143] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0

<7> [392.241199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa

<7> [392.242286] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa

<7> [392.243371] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa

<7> [392.244447] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa

<7> [392.245526] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa

<7> [392.246626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820

<7> [392.247752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0

<7> [392.248790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [392.249830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [392.250862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [392.251905] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000

<7> [392.253032] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [392.254114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [392.255222] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [392.256306] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [392.257404] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [392.258496] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [392.259611] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [392.260759] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [392.261824] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [392.262865] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [392.263877] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [392.265024] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [392.266079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:300] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [392.267156] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [392.268218] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [392.269314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [392.270397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [392.271461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [392.272540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [392.273627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no

<7> [392.287780] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [392.288374] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [392.289479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [392.290655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [392.291899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [392.293060] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [392.294167] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [392.295515] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [392.296827] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [392.308806] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [392.309846] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [392.315596] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [392.318001] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled

<7> [392.320020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [392.329866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [392.331114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [392.332457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [392.334014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A

<7> [392.335348] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x2000071 0x13421c72)

<7> [392.336627] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [392.337959] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=768

<7> [392.339119] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A]

<7> [392.340161] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B]

<7> [392.341213] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A]

<7> [392.342248] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B]

<7> [392.343255] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C]

<7> [392.344256] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D]

<7> [392.345364] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1]

<7> [392.346370] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A]

<7> [392.347363] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B]

<7> [392.348277] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C]

<7> [392.349141] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D]

<7> [392.350127] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2]

<7> [392.351087] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:273:DP-MST A]

<7> [392.352039] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST B]

<7> [392.352963] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST C]

<7> [392.353894] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST D]

<7> [392.354831] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DDI TC3/PHY TC3]

<7> [392.355874] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:282:DP-MST A]

<7> [392.356804] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST B]

<7> [392.357730] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST C]

<7> [392.358628] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST D]

<7> [392.359641] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DDI TC4/PHY TC4]

<7> [392.360636] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DP-MST A]

<7> [392.361633] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DP-MST B]

<7> [392.362781] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:293:DP-MST C]

<7> [392.363677] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DP-MST D]

<7> [392.364779] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [392.366068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [392.368582] i915 0000:00:02.0: [drm:intel_dp_128b132b_sdp_crc16 [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] DP2.0 SDP CRC16 for 128b/132b enabled

<7> [392.369615] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on

<7> [392.370588] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [392.632929] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [392.633848] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [392.634792] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on

<7> [392.635739] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [392.666392] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [392.667442] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI A/PHY A] - long

<7> [392.668502] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [392.669596] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI A/PHY A]

<7> [392.835107] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [392.838372] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on

<7> [392.839405] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [392.843597] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80

<7> [392.844430] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [392.845865] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07

<7> [392.847739] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [392.848548] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [392.850822] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK

<7> [392.851152] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3

<7> [392.853644] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [392.854002] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [392.855072] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [392.855793] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [392.856143] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [392.856526] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000

<7> [392.867023] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [392.868311] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2

<7> [392.871595] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1]

<7> [392.872076] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A]

<7> [392.873430] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes,

<7> [392.874162] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1,

<7> [392.875096] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0.

<7> [392.876025] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state:

<7> [392.876947] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21

<7> [392.877857] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0

<7> [392.878788] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [392.879646] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [392.880586] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0

<7> [392.881506] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23

<7> [392.882525] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0

<7> [392.885444] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]

<7> [392.887970] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [392.888384] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<6> [392.888825] [IGT] i915_pm_rpm: finished subtest basic-pci-d3-state, SUCCESS

<7> [392.889500] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:300] from all active usage due to RMFB ioctl

<7> [392.889831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [392.890310] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000

<7> [392.890654] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000

<7> [392.891034] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000

<7> [392.891383] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [392.891400] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor

<7> [392.891412] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0

<7> [392.891449] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no

<7> [392.891792] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [392.893949] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [392.894375] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [392.895967] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:eDP-1] Same epoch counter 1

<7> [392.896027] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:300] is removed

<7> [392.896133] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0

<7> [392.896528] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [392.897043] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [392.897679] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [392.898397] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [392.899357] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0

<7> [392.900594] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 0 qgv_peak_bw: 51200

<7> [392.901829] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 0 qgv_peak_bw: 51200

<7> [392.903141] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 28357 required 0 qgv_peak_bw: 51200

<7> [392.904347] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 0 qgv_peak_bw: 51200

<7> [392.905503] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0

<7> [392.907299] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2

<7> [392.934206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]

<7> [392.935327] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:245:DP-1] Same epoch counter 1

<7> [392.935446] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]

<7> [392.936509] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] Same epoch counter 5

<7> [392.936605] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2]

<7> [392.937544] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:263:DP-2] Same epoch counter 1

<7> [392.938293] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001

<7> [392.939201] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [392.940142] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0

<7> [392.941168] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87

<7> [392.942148] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88

<7> [392.943160] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1

<7> [392.944340] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 2159 qgv_peak_bw: 51200

<7> [392.945466] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 2159 qgv_peak_bw: 51200

<7> [392.946608] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 28357 required 2159 qgv_peak_bw: 51200

<7> [392.947663] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 2159 qgv_peak_bw: 51200

<7> [392.948577] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159

<7> [392.955971] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2

<7> [392.959871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:272:DP-3]

<7> [392.960321] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:272:DP-3] Same epoch counter 1

<7> [392.960368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-4]

<7> [392.960841] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:281:DP-4] Same epoch counter 1

<7> [392.960886] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-5]

<7> [392.961483] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:290:DP-5] Same epoch counter 1

<6> [392.961868] [IGT] i915_pm_rpm: exiting, ret=0

<6> [392.979584] Console: switching to colour frame buffer device 360x112

Results for igt@i915_pm_rpm@basic-pci-d3-state