Result:
git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0
| Detail | Value |
|---|---|
| Igt-Version |
IGT-Version: 1.27.1-g34b68fb58 (x86_64) (Linux: 6.5.0-linus-v6.5-g2dde18cd1d8f+ x86_64) |
| Out |
Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: yes Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1e9/0x740 drm_ioctl_kernel+0xb4/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa3f/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1e9/0x740 Wakeref count: 0 i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 3 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x89/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x24e/0x500 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_display_power_flush_work+0xdf/0xf0 [i915] intel_dp_detect+0x231/0x630 [i915] drm_helper_probe_detect_ctx+0x42/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] Wakeref count: 3 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] gmbus_xfer+0x29/0xb0 [i915] __i2c_transfer+0x178/0x580 i2c_transfer+0x7e/0x100 drm_do_probe_ddc_edid+0xb7/0x130 drm_edid_read_ddc+0x72/0x80 intel_hdmi_set_edid+0x5e/0x2a0 [i915] Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x89/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x24e/0x500 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_set_edid+0x3f/0x2a0 [i915] intel_hdmi_detect+0xb7/0x160 [i915] drm_helper_probe_detect_ctx+0x89/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] Test requirement not met in function __igt_unique____real_main2421, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2432: Test requirement: setup_environment(true) Subtest basic-pci-d3-state: SKIP (0.000s) |
| Err |
(i915_pm_rpm:5335) igt_pm-WARNING: timeout: pm_status expected:suspended, got:active Subtest basic-pci-d3-state: SKIP (0.000s) |
| Dmesg |
<6> [131.791647] Console: switching to colour dummy device 80x25
<6> [131.791732] [IGT] i915_pm_rpm: executing
<7> [131.796008] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [131.796678] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [131.796711] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.797003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.797589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.798107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.798679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.799418] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [131.799704] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [131.800612] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.802226] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.803814] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.805313] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.807078] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.808883] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.810643] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.812567] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.814265] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.815144] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [131.816034] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [131.816720] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [131.817213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.817475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.817674] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.817953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.818628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.818842] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [131.819013] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-2]
<7> [131.819042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [131.819331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.819933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.820223] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-2] disconnected
<7> [131.820389] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1]
<7> [131.820418] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [131.820640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.871505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [131.887489] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.887500] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.887696] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.903576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.903583] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.903758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.903958] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [131.909995] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [131.910021] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.910248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.910797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.911423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.911984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.912710] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [131.913007] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [131.914064] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.915652] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.917315] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.918994] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.920824] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.922652] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.924467] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.926223] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.927812] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [131.928743] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [131.929636] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [131.930294] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [131.930829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.931143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.931383] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.931615] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.932287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.932581] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [131.933553] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-2]
<7> [131.933586] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [131.933839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.934375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.934595] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-2] disconnected
<7> [131.935549] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1]
<7> [131.935572] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [131.935758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.987514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [132.003468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.003478] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.003668] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.018987] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.018994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.019169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.019499] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [132.020199] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [132.020222] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.020470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.021008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.021541] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.022131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.022937] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [132.023133] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [132.024102] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [132.025773] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [132.027320] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [132.028929] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [132.030727] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [132.032529] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [132.034322] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [132.036060] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [132.037658] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [132.038634] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [132.039561] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [132.040245] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [132.040747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.041051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.041263] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.041502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.042174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.042489] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [132.042550] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-2]
<7> [132.042569] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [132.042767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.043305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.043511] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-2] disconnected
<7> [132.043551] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1]
<7> [132.043568] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [132.043743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.095505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [132.111498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.111508] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.111704] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.127606] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.127613] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.127789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.127991] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] disconnected
<7> [133.133009] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [133.139603] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.164541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.173859] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [133.174681] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.175858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.176447] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [133.177552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.178697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.179769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.184406] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [133.185220] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [133.187044] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.188893] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.190823] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.192809] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.195263] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.197828] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.199741] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.201736] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.203463] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.204648] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [133.205982] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [133.206778] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [133.207516] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [133.208505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.209013] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.209543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.210502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.211672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [133.215033] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [133.217303] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.241590] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.246832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.247065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.247255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.247775] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.248387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.248579] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.248773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.249529] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.250173] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [133.251304] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [133.254089] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.279207] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.283646] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.283865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.284058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.284574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.285202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.285521] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.285804] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.286557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.286950] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [133.287401] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [133.288763] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [133.291292] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.315799] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.321389] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.321641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.322171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.322439] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [133.323770] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [133.326297] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.350753] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.356850] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.357070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.357256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.357790] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.358397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.358589] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.358791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.359545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.359826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [133.361484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [133.365294] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.389849] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.395282] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.395473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.447538] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [133.472697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.472721] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.473212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [133.493306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.493316] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.493530] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.493794] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [133.495546] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [133.495603] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [133.498337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.522432] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.530804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.530997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.531554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.532117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.532696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.533445] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [133.533664] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [133.534587] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.536177] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.537838] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.539312] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.541064] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.542888] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.544650] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.546571] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.548176] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.549043] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [133.549854] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [133.550504] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [133.551027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [133.551257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.551467] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.551694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.552357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.552665] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [133.552704] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [133.552936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.553473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.553716] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [133.553740] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [133.553970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.605504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [133.622560] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.622572] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.622783] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [133.639729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.639737] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.639915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.640131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [133.641843] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [133.641903] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [133.646338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.670907] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.676256] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.676436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.676956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.677615] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.678199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.678923] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [133.679112] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [133.680064] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.681645] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.683266] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.684670] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.686506] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.688311] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.690078] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.691914] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.693510] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.694438] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [133.695376] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [133.696066] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [133.696607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [133.696841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.697033] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.697256] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.698028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.698343] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [133.698371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [133.698603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.699129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.699348] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [133.699379] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [133.699607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.751505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [133.769086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.769097] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.769339] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [133.785903] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.785911] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.786091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.786353] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [133.787665] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [133.787726] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [133.792291] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.817112] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.824359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.824558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.825133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.825699] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.826297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.827087] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [133.827355] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [133.828336] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.829990] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.831655] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.833325] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.835090] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.836977] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.838832] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.840651] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.842319] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.843205] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [133.844147] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [133.844848] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [133.845385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [133.845651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.845883] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.846107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.846820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.847076] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [133.847108] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [133.847355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.847927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.848211] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [133.848240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [133.848484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.899504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [133.916033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.916044] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.916241] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [133.932715] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.932723] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.932902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.933120] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [133.934845] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [133.934916] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [133.939338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.963573] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.970337] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.970519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.971040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.971583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.972191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.972950] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [133.973162] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [133.974128] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.975522] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.977318] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.978655] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.980644] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.982564] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.984481] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.986316] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.987923] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [133.988791] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [133.989655] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [133.990325] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [133.990850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [133.991083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.991331] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.991562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.992266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.992540] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [133.992571] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [133.992754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.993309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.993534] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [133.993558] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [133.993736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.045504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [134.062588] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [134.062599] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [134.062811] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [134.079764] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [134.079773] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [134.079951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.080167] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [134.081431] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [134.081501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [134.084214] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [134.108769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [134.114029] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [134.114208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.114847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [134.115423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [134.115982] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [134.116910] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [134.117103] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [134.118058] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.119448] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.121226] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.122827] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.124612] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.126295] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.128168] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.129963] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.131551] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.132548] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [134.133679] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [134.134333] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [134.134857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [134.135174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [134.135447] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [134.135675] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [134.136349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.136651] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [134.136690] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [134.136894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.137452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.137696] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [134.137720] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [134.137898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.189509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [134.206030] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [134.206039] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [134.206221] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [134.222737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [134.222745] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [134.222929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.223156] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [134.224861] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [134.224922] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [134.229330] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [134.252605] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [134.259344] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [134.259518] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.260039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [134.260614] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [134.261219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [134.261970] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [134.262179] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [134.263171] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.264822] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.266319] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.267919] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.269447] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.271340] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.272805] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.274645] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.276320] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.277198] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [134.278098] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [134.278758] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [134.279252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [134.279598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [134.279795] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [134.279982] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [134.280665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.280918] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [134.280947] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [134.281129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.281736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.281983] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [134.282016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [134.282196] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.333505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [134.350033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [134.350044] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [134.350241] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [134.366718] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [134.366727] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [134.366906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.367125] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [134.368838] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [134.368906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [134.373336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [134.397916] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [134.403041] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [134.403206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.403767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [134.404364] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [134.404911] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [134.405765] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [134.405979] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [134.406616] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.408254] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.409630] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.411309] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.413324] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.415086] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.416911] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.418660] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.420342] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.421225] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [134.422231] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [134.422968] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [134.423529] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [134.423796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [134.423990] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [134.424231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [134.424956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.425214] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [134.425248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [134.425502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.426058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.426376] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [134.426404] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [134.426585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.477498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [134.494613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [134.494624] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [134.494838] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [134.511777] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [134.511785] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [134.511963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.512181] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [134.513915] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [134.513983] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [134.518340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [134.542741] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [134.549347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [134.549525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.550055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [134.550599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [134.551208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [134.551967] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [134.552180] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [134.553154] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.554819] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.556317] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.557948] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.559754] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.561552] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.563314] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.565067] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.566647] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.567646] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [134.568455] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [134.569311] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [134.569833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [134.570089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [134.570314] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [134.570512] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [134.571153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.571410] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [134.571448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [134.571726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.572246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.572468] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [134.572500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [134.572727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.624319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [134.641328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [134.641337] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [134.641519] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [134.657970] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [134.657978] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [134.658157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.658405] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [134.659714] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [134.659766] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [134.664335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [134.688896] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [134.693830] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [134.694003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.694560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [134.695138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [134.695713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [134.696394] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [134.696676] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [134.697748] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.699326] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.700679] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.702316] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.704138] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.705932] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.707649] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.709480] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.711222] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.712110] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [134.713048] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [134.713753] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [134.714293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [134.714577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [134.714787] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [134.714974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [134.715686] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.715946] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [134.715974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [134.716157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.716709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.716993] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [134.717027] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [134.717252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.768503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [134.785039] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [134.785050] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [134.785248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [134.801708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [134.801716] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [134.801891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.802108] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [134.803826] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [134.803886] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [134.808338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [134.832741] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [134.839347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [134.839514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.840043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [134.840587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [134.841195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [134.841952] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [134.842166] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [134.843122] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.844818] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.846324] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.847692] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.849561] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.851302] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.853070] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.854883] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.856488] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.857437] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [134.858354] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [134.859021] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [134.859637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [134.859874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [134.860066] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [134.860254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [134.861028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.861252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [134.861301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [134.861522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.862061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.862292] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [134.862327] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [134.862519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.913504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [134.930038] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [134.930048] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [134.930243] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [134.946699] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [134.946707] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [134.946884] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [134.947102] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [134.948819] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [134.948879] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [134.953341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [134.977826] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [134.983120] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [134.983320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [134.983851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [134.984415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [134.985025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [134.985764] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [134.985960] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [134.986786] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.988310] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.989934] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.991528] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.993220] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.995006] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.996779] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [134.998644] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.000320] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.001189] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [135.002057] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [135.002759] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [135.003305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [135.003547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [135.003742] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [135.003979] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [135.004726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.004951] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [135.004978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [135.005159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.005784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.006081] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [135.006116] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [135.006385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.057496] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [135.074005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.074017] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [135.074228] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [135.090683] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.090691] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [135.090869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.091085] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [135.092805] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [135.092879] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [135.097343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [135.121773] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [135.127045] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [135.127217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.127811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [135.128391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [135.128998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [135.129764] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [135.129956] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [135.130934] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.132541] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.134111] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.135647] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.137504] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.139205] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.141009] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.142819] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.144316] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.145195] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [135.146039] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [135.146740] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [135.147266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [135.147584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [135.147785] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [135.147985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [135.148650] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.148952] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [135.148984] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [135.149167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.149727] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.149972] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [135.149995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [135.150174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.201504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [135.218595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.218607] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [135.218818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [135.235787] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.235795] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [135.235974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.236191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [135.237924] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [135.237994] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [135.242332] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [135.266562] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [135.273341] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [135.273514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.274037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [135.274586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [135.275197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [135.275952] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [135.276165] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [135.277122] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.278734] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.280292] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.281941] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.283728] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.285320] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.287154] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.289065] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.290739] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.291578] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [135.292516] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [135.293206] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [135.293753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [135.294049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [135.294243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [135.294455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [135.295153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.295487] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [135.295525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [135.295794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.296402] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.296694] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [135.296723] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [135.296903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.348508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [135.365062] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.365073] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [135.365269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [135.381719] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.381727] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [135.381906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.382124] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [135.383839] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [135.383899] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [135.388338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [135.412743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [135.419347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [135.419526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.420054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [135.420596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [135.421141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [135.421935] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [135.422127] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [135.422939] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.424583] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.426206] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.427822] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.429644] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.431483] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.433316] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.435082] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.436645] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.437642] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [135.438611] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [135.439325] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [135.439840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [135.440112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [135.440401] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [135.440623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [135.441292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.441548] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [135.441577] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [135.441759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.442382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.442597] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [135.442622] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [135.442822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.494508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [135.511564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.511576] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [135.511788] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [135.528269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.528294] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [135.528473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.528691] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [135.529918] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [135.529992] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [135.534351] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [135.556614] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [135.563338] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [135.563514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.564037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [135.564609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [135.565134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [135.565937] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [135.566128] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [135.566852] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.568489] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.570162] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.571822] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.573591] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.575329] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.577067] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.578880] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.580507] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.581449] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [135.582329] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [135.583005] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [135.583554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [135.583806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [135.584000] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [135.584265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [135.584981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.585214] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [135.585241] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [135.585474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.585997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.586230] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [135.586255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [135.586460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.637504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [135.654022] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.654033] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [135.654228] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [135.670674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.670682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [135.670859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.671075] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [135.672792] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [135.672853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [135.677339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [135.701536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [135.708336] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [135.708516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.709046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [135.709612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [135.710222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [135.710987] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [135.711201] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [135.712262] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.713676] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.715315] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.716951] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.718740] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.720311] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.722072] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.723885] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.725498] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.726470] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [135.727326] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [135.728051] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [135.728601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [135.728928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [135.729216] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [135.729448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [135.730104] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.730367] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [135.730404] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [135.730682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.731200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.731434] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [135.731466] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [135.731720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.783502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [135.800534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.800544] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [135.800740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [135.817153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.817162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [135.817374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.817674] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [135.818924] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [135.818998] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [135.823341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [135.848150] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [135.853249] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [135.853440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.853964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [135.854513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [135.855127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [135.855893] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [135.856105] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [135.857079] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.858741] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.860319] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.861921] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.863742] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.865480] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.867320] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.869093] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.870651] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [135.871567] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [135.872416] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [135.873357] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [135.873853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [135.874088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [135.874404] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [135.874635] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [135.875299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.875600] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [135.875639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [135.875902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.876462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.876705] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [135.876730] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [135.876999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.928309] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [135.944937] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.944947] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [135.945135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [135.961576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.961584] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [135.961765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.961982] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [135.963702] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [135.963757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [135.968340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [135.992539] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [135.999335] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [135.999514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.000045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [136.000594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [136.001204] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [136.002069] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [136.002298] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 1 ms
<7> [136.003268] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.004921] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.006528] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.008173] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.010001] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.011818] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.013612] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.015315] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.016938] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.017836] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [136.018752] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [136.019528] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [136.020042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [136.020382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [136.020593] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [136.020792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [136.021464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.021773] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [136.021803] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [136.021985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.022545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.022756] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [136.022780] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [136.022957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.074508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [136.091042] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [136.091052] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [136.091250] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [136.107725] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [136.107733] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [136.107913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.108130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [136.109850] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [136.109906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [136.114342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [136.138737] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [136.145343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [136.145517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.146039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [136.146589] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [136.147195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [136.147966] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [136.148161] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [136.149144] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.150818] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.152318] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.153929] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.155724] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.157562] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.159320] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.161074] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.162642] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.163667] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [136.164503] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [136.165209] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [136.165716] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [136.166039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [136.166235] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [136.166458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [136.167149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.167477] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [136.167516] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [136.167765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.168304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.168565] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [136.168589] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [136.168851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.220504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [136.237535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [136.237546] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [136.237743] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [136.254723] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [136.254731] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [136.254913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.255129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [136.256847] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [136.256903] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [136.261351] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [136.285874] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [136.291143] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [136.291346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.291868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [136.292418] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [136.293026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [136.293768] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [136.293970] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [136.294896] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.296524] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.298145] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.299767] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.301576] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.303293] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.305170] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.306989] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.308616] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.309443] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [136.310411] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [136.311098] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [136.311720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [136.311955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [136.312228] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [136.312481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [136.313163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.313414] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [136.313445] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [136.313627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.314156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.314471] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [136.314500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [136.314695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.366509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [136.383606] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [136.383617] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [136.383833] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [136.400811] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [136.400819] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [136.400997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.401214] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [136.402951] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [136.403035] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [136.407330] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [136.431430] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [136.438381] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [136.438572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.439096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [136.439622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [136.440237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [136.441001] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [136.441215] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [136.442187] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.443819] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.445316] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.446938] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.448819] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.450607] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.452317] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.454158] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.455785] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.456664] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [136.457616] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [136.458306] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [136.458944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [136.459194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [136.459424] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [136.459622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [136.460304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.460608] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [136.460638] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [136.460820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.461356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.461568] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [136.461591] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [136.461767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.513499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [136.530538] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [136.530548] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [136.530746] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [136.547721] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [136.547729] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [136.547913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.548129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [136.549848] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [136.549902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [136.554337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [136.578738] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [136.585347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [136.585522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.586051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [136.586595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [136.587203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [136.587967] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [136.588166] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [136.589165] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.590851] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.592316] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.593710] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.595502] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.597318] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.599076] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.600913] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.602546] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.603442] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [136.604330] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [136.605007] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [136.605564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [136.605817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [136.606011] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [136.606268] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [136.606991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.607224] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [136.607252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [136.607480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.608002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.608234] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [136.608259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [136.608466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.659503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [136.675997] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [136.676009] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [136.676206] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [136.693206] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [136.693222] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [136.693573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.693895] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [136.695239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [136.695326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [136.697773] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [136.721742] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [136.728341] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [136.728601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.729212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [136.729741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [136.730361] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [136.731118] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [136.731329] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [136.732076] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.734097] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.735728] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.737138] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.739066] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.740864] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.742644] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.744490] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.746188] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.747085] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [136.747988] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [136.748722] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [136.749225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [136.749554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [136.749768] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [136.749973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [136.750641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.750946] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [136.750974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [136.751159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.751719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.751964] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [136.751988] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [136.752166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.803506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [136.820557] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [136.820569] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [136.820781] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [136.837252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [136.837260] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [136.837468] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.837786] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [136.839569] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [136.839622] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [136.842326] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [136.866879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [136.872304] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [136.872483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.873004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [136.873572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [136.874184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [136.874924] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [136.875114] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [136.876121] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.877743] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.879317] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.880713] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.882313] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.884076] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.885824] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.887612] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.889208] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [136.890076] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [136.890939] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [136.891607] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [136.892139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [136.892412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [136.892608] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [136.892795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [136.893492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.893804] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [136.893842] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [136.894100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.894713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.894968] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [136.894993] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [136.895197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [136.946503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [136.963535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [136.963546] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [136.963743] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [136.980148] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [136.980156] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [136.980368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [136.980671] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [136.981921] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [136.981995] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [136.986334] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [137.010745] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [137.015938] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [137.016113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.016678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [137.017261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [137.017836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [137.018586] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [137.018783] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [137.019961] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.021613] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.023326] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.024942] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.026891] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.028650] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.030315] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.032188] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.033780] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.034692] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [137.035431] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [137.036139] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [137.036663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [137.037001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [137.037202] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [137.037417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [137.038104] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.038435] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [137.038473] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [137.038725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.039239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.039458] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [137.039491] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [137.039761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.091504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [137.108537] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [137.108547] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [137.108743] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [137.125189] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [137.125197] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [137.125410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.125714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [137.126947] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [137.126999] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [137.131333] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [137.155746] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [137.161866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [137.162043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.162630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [137.163205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [137.163781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [137.164531] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [137.164738] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [137.165661] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.167296] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.168700] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.170312] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.171818] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.173655] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.175315] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.177075] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.178644] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.179678] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [137.180505] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [137.181227] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [137.181732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [137.182070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [137.182371] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [137.182576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [137.183251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.183542] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [137.183580] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [137.183861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.184440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.184693] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [137.184718] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [137.184898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.236504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [137.253528] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [137.253539] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [137.253734] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [137.270152] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [137.270160] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [137.270373] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.270678] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [137.271932] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [137.272005] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [137.276354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [137.300606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [137.307352] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [137.307529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.308050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [137.308598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [137.309207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [137.309988] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [137.310179] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [137.311269] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.312947] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.314572] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.316213] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.318041] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.319857] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.321649] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.323581] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.325179] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.326082] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [137.326958] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [137.327592] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [137.328083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [137.328530] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [137.328728] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [137.328939] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [137.329627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.329883] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [137.329911] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [137.330094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.330640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.330883] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [137.330907] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [137.331084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.382483] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [137.399545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [137.399556] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [137.399765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [137.416714] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [137.416722] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [137.416900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.417117] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [137.418844] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [137.418895] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [137.423343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [137.447737] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [137.454345] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [137.454517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.455040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [137.455610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [137.456219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [137.456974] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [137.457167] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [137.458149] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.459797] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.461311] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.462935] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.464731] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.466560] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.468314] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.470060] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.471648] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.472628] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [137.473496] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [137.474173] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [137.474670] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [137.474925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [137.475133] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [137.475364] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [137.476023] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.476347] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [137.476385] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [137.476611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.477137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.477394] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [137.477428] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [137.477650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.529348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [137.545826] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [137.545836] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [137.546007] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [137.562423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [137.562431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [137.562612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.562829] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [137.564558] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [137.564612] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [137.567306] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [137.591868] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [137.597331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [137.597506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.598027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [137.598574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [137.599180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [137.600149] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [137.600361] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [137.601311] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.602693] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.604319] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.605960] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.607766] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.609598] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.611315] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.613079] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.614648] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.615662] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [137.616503] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [137.617214] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [137.617663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [137.617988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [137.618220] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [137.618441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [137.619102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.619429] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [137.619469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [137.619686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.620199] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.620435] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [137.620469] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [137.620743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.672507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [137.689558] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [137.689569] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [137.689780] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [137.706741] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [137.706750] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [137.706932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.707149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [137.708866] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [137.708922] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [137.713338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [137.737893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [137.743343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [137.743514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.744035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [137.744580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [137.745188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [137.745984] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [137.746178] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [137.747154] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.748833] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.750314] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.751913] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.753645] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.755587] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.757313] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.759157] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.760794] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.761703] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [137.762614] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [137.763335] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [137.763860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [137.764155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [137.764399] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [137.764600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [137.765249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.765578] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [137.765617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [137.765838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.766369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.766608] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [137.766641] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [137.766915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.818507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [137.836089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [137.836100] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [137.836373] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [137.853458] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [137.853466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [137.853646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.853864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [137.855564] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [137.855617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [137.858338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [137.882751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [137.888043] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [137.888221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.888788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [137.889389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [137.889943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [137.890650] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [137.890864] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [137.891868] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.893469] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.895182] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.896818] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.898612] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.900318] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.902063] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.903884] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.905507] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [137.906477] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [137.907334] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [137.908006] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [137.908553] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [137.908799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [137.908993] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [137.909223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [137.909953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.910187] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [137.910215] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [137.910458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.910980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.911211] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [137.911235] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [137.911449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [137.962504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [137.979597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [137.979609] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [137.979824] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [137.996779] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [137.996787] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [137.996968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [137.997184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [137.998481] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [137.998532] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [138.001302] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [138.025772] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [138.031100] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [138.031268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.031835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [138.032436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [138.033042] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [138.033795] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [138.033988] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [138.034923] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.036549] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.038134] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.039736] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.041548] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.043130] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.044682] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.046651] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.048297] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.049182] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [138.050327] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [138.050994] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [138.051547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [138.051798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [138.052007] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [138.052193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [138.052907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.053167] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [138.053195] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [138.053426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.054001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.054239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [138.054296] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [138.054545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.105498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [138.122571] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [138.122582] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [138.122794] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [138.139770] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [138.139778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [138.139958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.140175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [138.141486] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [138.141556] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [138.144333] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [138.168624] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [138.175340] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [138.175517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.176039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [138.176609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [138.177222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [138.177984] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [138.178180] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [138.179156] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.180787] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.182310] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.183932] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.185740] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.187316] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.189193] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.191020] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.192653] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.193632] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [138.194608] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [138.195313] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [138.195916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [138.196165] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [138.196473] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [138.196736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [138.197404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.197622] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [138.197650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [138.197835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.198369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.198640] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [138.198675] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [138.198932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.250495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [138.267545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [138.267557] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [138.267768] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [138.284730] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [138.284741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [138.284927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.285144] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [138.286396] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [138.286466] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [138.289329] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [138.313752] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [138.320346] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [138.320519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.321041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [138.321594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [138.322205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [138.322994] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [138.323205] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [138.324190] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.325678] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.327321] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.328700] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.330583] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.332296] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.334066] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.335872] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.337560] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.338537] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [138.339330] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [138.340005] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [138.340558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [138.340810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [138.341005] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [138.341237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [138.341967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.342203] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [138.342231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [138.342489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.343012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.343329] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [138.343357] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [138.343536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.394504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [138.410975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [138.410986] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [138.411181] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [138.427603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [138.427610] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [138.427792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.428010] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [138.429728] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [138.429802] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [138.434337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [138.458730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [138.464060] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [138.464237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.464804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [138.465405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [138.466009] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [138.467011] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [138.467205] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [138.468191] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.469849] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.471614] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.472934] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.474792] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.476563] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.478318] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.480090] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.481726] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.482608] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [138.483448] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [138.484154] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [138.484680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [138.484997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [138.485314] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [138.485555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [138.486199] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.486428] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [138.486466] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [138.486716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.487233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.487543] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [138.487579] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [138.487810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.539506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [138.556032] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [138.556044] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [138.556240] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [138.572691] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [138.572699] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [138.572878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.573094] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [138.574812] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [138.574871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [138.579344] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [138.603775] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [138.609186] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [138.609393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.609914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [138.610464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [138.611076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [138.611873] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [138.612063] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [138.613190] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.615005] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.616597] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.618248] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.620034] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.621824] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.623616] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.625317] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.626638] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.627546] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [138.628377] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [138.629093] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [138.629614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [138.629849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [138.630041] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [138.630254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [138.631029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.631324] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [138.631352] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [138.631537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.632048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.632245] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [138.632268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [138.632461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.683506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [138.701140] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [138.701152] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [138.701450] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [138.718567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [138.718576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [138.718759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.718976] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [138.720701] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [138.720759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [138.723333] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [138.747860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [138.753328] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [138.753502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.754023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [138.754590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [138.755200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [138.755971] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [138.756162] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [138.757176] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.758839] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.760323] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.761957] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.763768] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.765596] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.767312] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.769069] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.770644] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.771655] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [138.772498] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [138.773493] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [138.773991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [138.774260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [138.774572] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [138.774810] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [138.775473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.775771] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [138.775809] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [138.776088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.776628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.776909] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [138.776934] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [138.777128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.828504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [138.846085] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [138.846096] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [138.846368] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [138.863443] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [138.863452] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [138.863632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.863849] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [138.865565] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [138.865638] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [138.868332] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [138.892431] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [138.899352] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [138.899530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.900053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [138.900598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [138.901140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [138.901952] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [138.902164] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [138.902894] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.904540] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.906200] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.907831] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.909618] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.911553] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.913320] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.915082] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.916721] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [138.917629] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [138.918470] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [138.919162] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [138.919682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [138.919938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [138.920134] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [138.920403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [138.921105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.921435] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [138.921475] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [138.921707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.922220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [138.922445] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [138.922477] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [138.922688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [138.974393] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [138.991468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [138.991479] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [138.991684] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [139.008164] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [139.008172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [139.008387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.008702] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [139.009954] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [139.010026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [139.014340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [139.038889] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [139.044105] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [139.044313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.044932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [139.045465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [139.046023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [139.046906] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [139.047117] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [139.048106] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.049655] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.051316] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.052958] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.054792] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.056589] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.058288] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.060098] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.061731] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.062632] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [139.063611] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [139.064304] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [139.064810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [139.065045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [139.065249] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [139.065550] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [139.066250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.066491] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [139.066529] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [139.066739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.067258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.067569] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [139.067595] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [139.067773] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.119506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [139.137153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [139.137163] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [139.137421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [139.153989] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [139.153998] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [139.154175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.154421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [139.156199] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [139.156251] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [139.159015] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [139.182862] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [139.188322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [139.188494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.189016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [139.189563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [139.190171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [139.190965] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [139.191156] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [139.192133] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.193760] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.195313] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.196634] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.198472] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.200233] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.202024] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.203796] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.205309] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.206175] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [139.207099] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [139.207776] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [139.208368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [139.208649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [139.208842] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [139.209028] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [139.209789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.210102] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [139.210140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [139.210358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.210944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.211155] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [139.211179] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [139.211412] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.262496] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [139.279042] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [139.279053] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [139.279251] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [139.295124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [139.295132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [139.295329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.295594] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [139.297295] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [139.297348] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [139.299989] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [139.324589] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [139.329996] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [139.330163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.330743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [139.331347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [139.331964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [139.332840] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [139.333129] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [139.334193] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.335888] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.337563] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.339223] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.341320] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.343144] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.345105] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.346971] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.348662] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.349608] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [139.350641] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [139.351366] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [139.351928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [139.352301] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [139.352594] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [139.352878] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [139.353638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.353951] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [139.353989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [139.354266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.354901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.355206] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [139.355240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [139.355529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.406511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [139.424659] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [139.424674] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [139.424960] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [139.442630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [139.442640] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [139.442912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.443236] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [139.445067] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [139.445142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [139.447957] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [139.472767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [139.478066] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [139.478232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.478828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [139.479432] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [139.480035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [139.480789] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [139.480981] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [139.481935] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.483569] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.485193] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.486818] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.488611] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.490315] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.492077] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.493908] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.495531] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.496473] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [139.497376] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [139.498047] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [139.498596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [139.498840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [139.499050] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [139.499251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [139.499941] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.500179] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [139.500217] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [139.500506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.501041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.501252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [139.501294] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [139.501548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.552505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [139.569026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [139.569037] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [139.569250] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [139.585731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [139.585739] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [139.585919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.586136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [139.587864] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [139.587927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [139.592336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [139.617132] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [139.624342] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [139.624517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.625038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [139.625587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [139.626200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [139.626986] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [139.627178] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [139.627981] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.629602] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.631074] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.632822] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.634601] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.636331] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.638081] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.639854] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.641313] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.642181] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [139.643097] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [139.643773] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [139.644346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [139.644619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [139.644813] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [139.644999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [139.645739] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.646051] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [139.646090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [139.646340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.646899] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.647104] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [139.647137] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [139.647427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.698401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [139.715498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [139.715509] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [139.715718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [139.732688] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [139.732697] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [139.732882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.733099] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [139.734370] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [139.734432] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [139.737178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [139.761875] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [139.767163] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [139.767361] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.767882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [139.768431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [139.769039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [139.769830] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [139.770022] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [139.770986] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.772654] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.774302] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.775637] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.777483] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.779267] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.781108] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.782913] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.784513] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.785467] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [139.786326] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [139.787041] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [139.787570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [139.787816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [139.788103] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [139.788398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [139.789124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.789376] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [139.789414] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [139.789624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.790237] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.790543] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [139.790579] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [139.790808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.842513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [139.859600] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [139.859612] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [139.859824] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [139.876770] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [139.876778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [139.876957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.877174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [139.878454] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [139.878517] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [139.881292] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [139.905870] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [139.911313] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [139.911490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.912010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [139.912564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [139.913167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [139.913999] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [139.914192] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [139.915137] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.916729] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.918314] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.919984] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.921775] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.923604] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.925315] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.927076] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.928647] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [139.929673] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [139.930499] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [139.931210] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [139.931718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [139.932028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [139.932319] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [139.932565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [139.933215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.933544] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [139.933582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [139.933842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.934373] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [139.934614] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [139.934638] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [139.934864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [139.986504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [140.003535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [140.003546] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [140.003744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [140.020182] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [140.020190] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [140.020412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.020732] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [140.021984] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [140.022058] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [140.026336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [140.051141] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [140.056176] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [140.056362] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.056884] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [140.057436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [140.058050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [140.058835] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [140.059026] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [140.060042] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.061644] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.063306] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.064961] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.066762] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.068562] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.070314] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.072074] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.073651] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.074632] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [140.075610] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [140.076301] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [140.076943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [140.077189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [140.077431] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [140.077708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [140.078453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.078774] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [140.078810] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [140.078993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.079551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.079859] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [140.079894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [140.080117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.131404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [140.148445] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [140.148455] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [140.148648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [140.165078] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [140.165086] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [140.165267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.165514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [140.167326] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [140.167398] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [140.170340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [140.194724] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [140.201343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [140.201517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.202039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [140.202589] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [140.203200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [140.204041] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [140.204251] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [140.205256] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.206641] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.208314] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.209941] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.211769] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.213661] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.215520] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.217314] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.218629] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.219855] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [140.220812] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [140.221496] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [140.221997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [140.222233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [140.222462] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [140.222840] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [140.223517] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.223731] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [140.223759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [140.223959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.224499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.224792] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [140.224820] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [140.224998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.276509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [140.293596] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [140.293607] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [140.293807] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [140.309715] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [140.309723] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [140.309905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.310120] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [140.311371] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [140.311441] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [140.314332] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [140.338431] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [140.345353] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [140.345532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.346056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [140.346602] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [140.347144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [140.347939] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [140.348137] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [140.349117] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.350668] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.352312] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.353917] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.355646] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.357320] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.359077] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.360818] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.362255] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.363253] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [140.364157] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [140.364878] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [140.365472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [140.365737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [140.365929] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [140.366115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [140.366796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.367102] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [140.367140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [140.367474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.368084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.368346] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [140.368381] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [140.368616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.420497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [140.437595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [140.437606] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [140.437816] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [140.454755] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [140.454763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [140.454946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.455163] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [140.456454] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [140.456515] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [140.459296] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [140.483864] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [140.488844] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [140.489010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.489571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [140.490152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [140.490745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [140.491422] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [140.491705] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [140.492626] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.494295] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.495893] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.497730] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.499499] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.501316] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.503147] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.504961] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.506549] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.507378] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [140.508228] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [140.508951] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [140.509448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [140.509685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [140.509878] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [140.510064] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [140.510726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.511032] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [140.511070] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [140.511369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.511959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.512162] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [140.512187] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [140.512383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.563501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [140.580576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [140.580588] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [140.580802] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [140.597773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [140.597782] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [140.597962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.598179] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [140.599473] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [140.599531] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [140.602339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [140.626916] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [140.632108] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [140.632312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.632932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [140.633468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [140.634045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [140.634893] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [140.635085] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [140.636041] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.637644] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.639290] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.640922] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.642656] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.644314] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.646116] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.647886] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.649503] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.650389] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [140.651318] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [140.652038] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [140.652565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [140.652811] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [140.653100] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [140.653385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [140.654078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.654373] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [140.654411] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [140.654692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.655250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.655478] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [140.655511] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [140.655754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.707511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [140.725061] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [140.725072] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [140.725343] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [140.742424] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [140.742435] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [140.742620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.742840] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [140.744073] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [140.744145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [140.747337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [140.771924] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [140.777158] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [140.777345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.777866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [140.778415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [140.779024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [140.779888] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [140.780083] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [140.781107] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.782525] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.784109] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.785650] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.787312] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.789123] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.790937] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.792648] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.794310] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.795179] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [140.796098] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [140.796827] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [140.797375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [140.797642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [140.797835] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [140.798021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [140.798689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.798998] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [140.799037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [140.799337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.799919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.800211] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [140.800245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [140.800480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.851503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [140.868047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [140.868058] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [140.868254] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [140.884687] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [140.884695] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [140.884877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.885094] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [140.886820] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [140.886895] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [140.891339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [140.915867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [140.920794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [140.920966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.921522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [140.922068] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [140.922692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [140.923448] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [140.923643] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [140.924595] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.926230] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.927879] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.929571] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.931315] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.933057] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.934818] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.936613] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.938204] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [140.939070] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [140.939944] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [140.940529] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [140.941028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [140.941509] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [140.941741] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [140.941929] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [140.942594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.942903] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [140.942941] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [140.943221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.943775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [140.943982] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [140.944006] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [140.944206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [140.995504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [141.012036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [141.012046] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [141.012243] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [141.028680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [141.028688] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [141.028867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.029085] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [141.030805] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [141.030878] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [141.035336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [141.059752] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [141.066344] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [141.066522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.067043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [141.067593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [141.068203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [141.069014] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [141.069217] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [141.070212] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.071822] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.073315] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.074715] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.076317] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.078088] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.079892] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.081645] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.083319] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.084188] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [141.085115] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [141.085795] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [141.086334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [141.086625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [141.086823] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [141.087009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [141.087676] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.087980] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [141.088018] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [141.088315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.088922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.089128] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [141.089153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [141.089379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.140497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [141.157521] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [141.157533] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [141.157732] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [141.174142] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [141.174151] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [141.174366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.174686] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [141.175920] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [141.175973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [141.180335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [141.204666] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [141.211352] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [141.211528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.212049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [141.212596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [141.213207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [141.213997] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [141.214189] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [141.215397] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.217099] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.218756] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.220312] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.222075] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.223819] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.225648] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.227601] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.229216] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.230084] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [141.230965] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [141.231587] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [141.232092] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [141.232445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [141.232678] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [141.232865] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [141.233532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.233839] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [141.233877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [141.234157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.234718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.234924] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [141.234948] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [141.235142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.286503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [141.304061] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [141.304072] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [141.304311] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [141.323045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [141.323062] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [141.323707] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.324050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [141.325556] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [141.325610] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [141.329022] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [141.352870] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [141.358170] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [141.358357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.358879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [141.359427] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [141.360034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [141.360842] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [141.361033] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [141.362029] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.363645] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.365305] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.366638] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.368485] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.370288] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.372125] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.373925] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.375535] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.376434] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [141.377328] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [141.378036] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [141.378585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [141.378844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [141.379037] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [141.379248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [141.379927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.380221] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [141.380259] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [141.380482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.381027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.381236] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [141.381261] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [141.381483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.432504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [141.449554] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [141.449565] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [141.449778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [141.466739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [141.466748] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [141.466927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.467143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [141.468874] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [141.468937] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [141.473333] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [141.497859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [141.503154] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [141.503343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.503864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [141.504412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [141.505020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [141.505818] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [141.506012] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [141.506921] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.508508] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.510166] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.511790] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.513564] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.515314] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.517081] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.518853] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.520313] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.521180] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [141.522098] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [141.522787] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [141.523376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [141.523697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [141.523902] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [141.524095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [141.524795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.525099] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [141.525131] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [141.525344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.525897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.526107] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [141.526132] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [141.526351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.577505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [141.594561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [141.594572] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [141.594771] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [141.610679] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [141.610688] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [141.610870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.611086] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [141.612812] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [141.612887] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [141.617336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [141.641437] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [141.648344] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [141.648530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.649053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [141.649628] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [141.650243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [141.651032] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [141.651223] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [141.652229] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.653861] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.655316] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.656695] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.658490] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.660296] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.662129] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.663935] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.665538] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.666436] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [141.667363] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [141.668048] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [141.668633] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [141.668888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [141.669100] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [141.669342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [141.670039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.670364] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [141.670402] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [141.670618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.671145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.671386] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [141.671420] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [141.671645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.723507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [141.740526] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [141.740537] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [141.740736] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [141.758287] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [141.758298] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [141.758569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.758892] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [141.760245] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [141.760328] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [141.763296] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [141.787785] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [141.793339] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [141.793515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.794036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [141.794585] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [141.795199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [141.796101] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [141.796419] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [141.797377] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.799081] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.800755] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.802488] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.804240] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.806098] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.808196] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.810070] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.811745] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.812700] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [141.813714] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [141.814450] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [141.815011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [141.815383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [141.815677] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [141.815962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [141.816723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.817033] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [141.817071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [141.817372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.817988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.818307] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [141.818343] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [141.818618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.870513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [141.888662] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [141.888676] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [141.888962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [141.906628] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [141.906640] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [141.906912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.907237] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [141.909064] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [141.909137] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [141.911300] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [141.935536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [141.939818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [141.939996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.940554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [141.941141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [141.941785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [141.942652] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [141.942942] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [141.943697] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.945156] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.946867] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.948539] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.950323] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.952181] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.954327] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.956182] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.957834] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [141.958746] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [141.959775] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [141.960514] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [141.961075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [141.961443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [141.961739] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [141.962024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [141.962798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.963111] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [141.963150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [141.963449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [141.964067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [141.964392] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [141.964428] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [141.964704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.016504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [142.034653] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [142.034667] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [142.034952] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [142.053067] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [142.053078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [142.053376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.053701] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [142.055515] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [142.055589] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [142.057631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [142.081876] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [142.087332] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [142.087509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.088038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [142.088604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [142.089218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [142.090078] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [142.090391] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [142.091326] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.093017] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.094833] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.096503] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.098247] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.100223] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.102093] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.103959] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.105627] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.106660] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [142.107933] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [142.108526] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [142.109088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [142.109462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [142.109756] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [142.110040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [142.110807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.111119] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [142.111158] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [142.111455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.112071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.112351] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [142.112387] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [142.112660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.164511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [142.182686] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [142.182700] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [142.182987] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [142.201100] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [142.201111] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [142.201408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.201731] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [142.203546] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [142.203619] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [142.206296] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [142.230741] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [142.236874] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [142.237053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.237619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [142.238206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [142.238841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [142.239641] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [142.239932] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [142.240850] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.242985] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.244663] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.247018] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.248644] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.250664] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.252507] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.254320] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.255698] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.256564] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [142.257573] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [142.258329] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [142.258893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [142.259238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [142.259554] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [142.259838] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [142.260597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.260914] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [142.260952] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [142.261231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.261864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.262173] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [142.262208] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [142.262499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.313504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [142.331680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [142.331694] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [142.331980] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [142.349647] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [142.349658] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [142.349936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.350259] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [142.352087] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [142.352161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [142.355009] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [142.379920] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [142.385168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [142.385368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.385889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [142.386439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [142.387046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [142.387858] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [142.388067] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [142.389045] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.390660] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.392316] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.393940] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.395650] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.397312] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.399120] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.400967] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.402649] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.403553] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [142.404460] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [142.405133] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [142.405618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [142.405861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [142.406071] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [142.406258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [142.406935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.407156] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [142.407191] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [142.407441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.407988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.408203] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [142.408227] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [142.408443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.459403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [142.476460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [142.476470] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [142.476680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [142.493149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [142.493157] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [142.493371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.493694] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [142.494947] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [142.494999] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [142.499337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [142.523904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [142.529243] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [142.529442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.529963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [142.530512] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [142.531118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [142.531946] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [142.532162] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [142.533165] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.534784] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.536648] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.538299] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.540103] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.541917] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.543647] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.545491] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.547110] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.548020] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [142.548858] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [142.549466] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [142.549973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [142.550212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [142.550471] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [142.550703] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [142.551440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.551673] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [142.551701] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [142.551902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.552440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.552736] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [142.552762] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [142.552943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.604505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [142.621549] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [142.621560] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [142.621772] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [142.638757] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [142.638765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [142.638946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.639164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [142.640458] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [142.640522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [142.643335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [142.667865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [142.673296] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [142.673473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.673993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [142.674543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [142.675151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [142.675962] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [142.676170] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [142.677140] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.678745] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.680295] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.681923] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.683644] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.685560] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.687262] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.689063] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.690740] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.691542] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [142.692421] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [142.692988] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [142.693511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [142.693754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [142.693947] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [142.694153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [142.694865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.695073] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [142.695101] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [142.695324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.695868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.696167] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [142.696203] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [142.696493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.747504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [142.764536] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [142.764546] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [142.764745] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [142.781176] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [142.781185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [142.781397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.781718] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [142.782989] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [142.783042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [142.787334] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [142.811861] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [142.817312] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [142.817485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.818006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [142.818562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [142.819171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [142.820293] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [142.820515] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [142.821325] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.822964] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.824618] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.826263] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.828132] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.829999] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.831819] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.833622] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.835260] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.836170] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [142.837074] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [142.837795] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [142.838343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [142.838577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [142.838770] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [142.839021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [142.839732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.839968] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [142.839998] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [142.840198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.840744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.840953] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [142.840978] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [142.841154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.892505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [142.909540] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [142.909551] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [142.909750] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [142.926197] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [142.926204] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [142.926418] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.926740] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [142.928009] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [142.928061] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [142.931334] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [142.955865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [142.961318] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [142.961491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.962012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [142.962578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [142.963162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [142.963996] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [142.964201] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [142.965170] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.966860] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.968486] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.970123] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.971971] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.973831] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.975645] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.977488] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.979118] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [142.980266] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [142.981169] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [142.981859] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [142.982452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [142.982692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [142.982917] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [142.983183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [142.983858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.984097] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [142.984125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [142.984333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [142.984871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [142.985074] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [142.985104] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [142.985421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.036498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [143.053604] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [143.053616] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [143.053832] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [143.070811] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [143.070818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [143.070998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.071216] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [143.072503] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [143.072574] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [143.075335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [143.099566] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [143.106346] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [143.106521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.107043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [143.107592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [143.108201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [143.109268] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [143.109500] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [143.110325] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.111972] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.113651] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.115296] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.117125] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.118968] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.120820] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.122620] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.124260] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.125164] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [143.126067] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [143.126732] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [143.127214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [143.127544] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [143.127834] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [143.128031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [143.128703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.129000] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [143.129037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [143.129325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.129922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.130212] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [143.130245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [143.130466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.181401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [143.198475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [143.198487] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [143.198694] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [143.215644] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [143.215652] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [143.215834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.216049] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [143.217774] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [143.217846] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [143.222338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [143.246865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [143.252305] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [143.252486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.253007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [143.253575] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [143.254183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [143.255006] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [143.255213] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [143.256201] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.257805] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.259312] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.260769] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.262575] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.264317] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.266121] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.268038] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.269653] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.270586] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [143.271534] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [143.272215] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [143.272709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [143.272958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [143.273152] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [143.273375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [143.274089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.274401] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [143.274431] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [143.274616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.275135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.275456] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [143.275491] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [143.275763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.327503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [143.344081] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [143.344092] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [143.344330] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [143.360840] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [143.360848] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [143.361024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.361241] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [143.362526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [143.362596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [143.365298] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [143.389733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [143.395155] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [143.395345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.395867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [143.396422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [143.397032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [143.397849] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [143.398042] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [143.398984] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.400656] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.402316] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.403958] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.405787] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.407590] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.409316] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.411122] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.412789] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.413657] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [143.414637] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [143.415334] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [143.415856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [143.416114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [143.416346] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [143.416544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [143.417232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.417530] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [143.417560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [143.417764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.418309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.418517] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [143.418541] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [143.418721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.470502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [143.487552] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [143.487563] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [143.487776] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [143.504750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [143.504758] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [143.504936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.505153] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [143.506435] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [143.506507] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [143.509250] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [143.533531] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [143.540352] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [143.540532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.541053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [143.541626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [143.542238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [143.543044] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [143.543251] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [143.544226] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.545828] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.547315] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.549007] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.551040] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.552822] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.554625] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.556318] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.557965] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.558839] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [143.559781] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [143.560450] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [143.560984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [143.561228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [143.561474] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [143.561709] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [143.562387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.562686] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [143.562715] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [143.562905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.563458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.563666] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [143.563690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [143.563870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.615403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [143.632447] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [143.632459] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [143.632670] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [143.649625] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [143.649633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [143.649819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.650036] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [143.651765] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [143.651839] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [143.656339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [143.680842] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [143.686201] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [143.686394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.686916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [143.687464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [143.688071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [143.688883] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [143.689074] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [143.690040] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.691653] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.693301] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.694932] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.696728] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.698499] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.700311] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.702084] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.703656] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.704563] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [143.705453] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [143.706137] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [143.706660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [143.706900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [143.707103] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [143.707403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [143.708118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.708447] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [143.708486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [143.708764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.709380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.709595] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [143.709620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [143.709798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.761500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [143.778571] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [143.778586] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [143.778801] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [143.795797] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [143.795805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [143.795988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.796206] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [143.797496] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [143.797567] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [143.800336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [143.824742] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [143.830119] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [143.830325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.830849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [143.831398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [143.832005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [143.832825] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [143.833036] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [143.833986] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.835600] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.837176] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.838774] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.840584] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.842318] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.844067] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.845912] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.847537] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.848421] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [143.849313] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [143.849978] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [143.850502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [143.850843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [143.851080] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [143.851266] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [143.851943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.852169] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [143.852198] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [143.852414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.852943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.853233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [143.853265] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [143.853475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<6> [143.881261] [IGT] i915_pm_rpm: exiting, ret=77
<7> [143.894861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [143.895508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [143.896049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [143.896455] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10
<7> [143.904395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [143.907668] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [143.907677] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [143.907868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [143.909157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [143.909646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [143.909943] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [143.910240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [143.915473] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [143.915495] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [143.915720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.916196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
<7> [143.916234] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [143.916479] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.917073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [143.917659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [143.918267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [143.919203] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [143.919486] i915 0000:00:02.0: [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode after 0 ms
<7> [143.920833] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.922494] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.924321] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.925756] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.927554] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.929775] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.931584] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.933311] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.934950] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [143.935829] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [143.936825] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [143.937512] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.72 quirks 0x0000
<7> [143.938015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [143.938333] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [143.938556] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [143.938764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [143.939437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.939741] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [143.939772] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-2]
<7> [143.939956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [143.940537] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.940744] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-2] Same epoch counter 1
<7> [143.940768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:114:HDMI-A-1]
<7> [143.940948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<6> [143.963296] Console: switching to colour frame buffer device 128x48
<7> [143.992419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
<7> [144.008903] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [144.008912] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [144.009087] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [144.026007] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [144.026015] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [144.026204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [144.027110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [144.027363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [144.027855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [144.028532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [144.028796] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [144.028983] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [144.029664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [144.030479] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:114:HDMI-A-1] Same epoch counter 6
|