igt@core_hotunplug@unbind-rebind on bat-adlm-1@linus-v6.5 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g34b68fb58 (x86_64) (Linux: 6.5.0-linus-v6.5-g2dde18cd1d8f+ x86_64)
Out	Opened device: /dev/dri/card0 Starting subtest: unbind-rebind Opened device: /dev/dri/renderD128 Unloaded audio driver snd_hda_intel Realoading snd_hda_intel Subtest unbind-rebind: SUCCESS (3.767s)
Err	Starting subtest: unbind-rebind Subtest unbind-rebind: SUCCESS (3.767s)
Dmesg	<6> [120.247366] Console: switching to colour dummy device 80x25 <6> [120.247442] [IGT] core_hotunplug: executing <7> [120.250154] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [120.250843] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [120.251102] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [120.252195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [120.256455] [IGT] core_hotunplug: closing selected device instance <7> [120.256817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [120.257162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [120.257348] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [120.257535] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [120.257696] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [120.257843] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [120.258024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [120.258180] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [120.258308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6> [120.259064] [IGT] core_hotunplug: starting subtest unbind-rebind <7> [120.361366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [121.268897] [IGT] core_hotunplug: reopening DRM device for health check <7> [121.268924] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [121.269342] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [121.269763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [121.273050] [IGT] core_hotunplug: running device sysfs healthcheck <7> [121.273121] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [121.273299] [IGT] core_hotunplug: closing health checked device instance <7> [121.273672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [121.273963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [121.274131] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.274268] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [121.274391] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.274513] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [121.274641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [121.274754] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [121.274859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [121.275438] [IGT] core_hotunplug: reopening render device for health check <7> [121.275463] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [121.275744] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [121.278633] [IGT] core_hotunplug: running device sysfs healthcheck <7> [121.278766] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [121.278972] [IGT] core_hotunplug: closing health checked device instance <7> [121.279316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [121.279605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [121.279749] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.279876] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [121.280001] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.280145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [121.280271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [121.280383] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [121.280490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [121.324549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [121.324922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [121.325113] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.325248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [121.325375] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.325496] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [121.325603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [121.325765] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [121.339145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [121.339288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [121.339405] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [121.339509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [121.368713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [121.369347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [121.369920] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.370286] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [121.370602] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.370893] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [121.371194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [121.371464] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [121.384883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [121.385176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [121.385395] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [121.385599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [121.430500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [121.430891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [121.431109] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.431294] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [121.431451] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.431598] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [121.431730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [121.431934] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [121.451000] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [121.451158] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [121.451276] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [121.451385] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [121.451491] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [121.451596] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [121.451702] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [121.451808] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [121.451911] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [121.452032] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [121.452248] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [121.452411] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [121.452543] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [121.452678] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [121.452821] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [121.452972] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [121.453176] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [121.453332] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [121.453444] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [121.453563] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [121.453677] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [121.453786] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [121.453892] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [121.453997] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [121.454131] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [121.454241] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [121.454347] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [121.454456] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [121.454562] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [121.454665] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [121.454769] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [121.454877] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [121.454981] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [121.455100] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [121.455205] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [121.455312] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [121.456104] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [121.456234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [121.456350] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [121.456455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [121.526398] [IGT] core_hotunplug: unbinding the driver from the device <7> [121.526815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [121.528181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [121.529069] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.529622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [121.530151] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.530604] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [121.531005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [121.531504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7> [121.532045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7> [121.532425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7> [121.532747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7> [121.563167] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [121.634162] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <7> [121.635074] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <7> [121.733538] [IGT] core_hotunplug: rebinding the driver to the device <7> [121.734414] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7> [121.734541] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7> [121.734670] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Alder Lake PCH <7> [121.734802] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [121.735171] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 19200 kHz <7> [121.735261] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7> [121.735332] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <7> [121.735679] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [121.735770] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [121.735843] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M <6> [121.735914] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [121.735940] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [121.736252] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [121.736265] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000050200087 <7> [121.736383] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K <7> [121.736792] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x44a07018 <7> [121.736917] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0 <7> [121.737037] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [121.737160] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [121.737267] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [121.737383] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7> [121.737499] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 4 <7> [121.737574] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [121.737668] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2401 tRP=24 tRDPRE=20 tRAS=52 tRCD=24 tRC=76 <7> [121.737794] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=4801 tRP=44 tRDPRE=28 tRAS=104 tRCD=44 tRC=148 <7> [121.737911] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=5201 tRP=48 tRDPRE=28 tRAS=112 tRCD=48 tRC=160 <7> [121.738063] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5201 tRP=48 tRDPRE=28 tRAS=112 tRCD=48 tRC=160 <7> [121.738175] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 0: CLK=32 <7> [121.738266] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 1: CLK=39 <7> [121.738356] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 2: CLK=48 <7> [121.738445] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=16956 peakbw: 38416 <7> [121.738533] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=23981 peakbw: 76816 <7> [121.738623] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=24772 peakbw: 83216 <7> [121.738713] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 3: num_planes=0 deratedbw=24772 peakbw: 83216 <7> [121.738801] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 0: num_planes=0 bw=34133 <7> [121.738890] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 1: num_planes=0 bw=41600 <7> [121.738985] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 2: num_planes=0 bw=51200 <7> [121.739106] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=21855 peakbw: 38416 <7> [121.739221] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=4 deratedbw=34500 peakbw: 76816 <7> [121.739336] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=4 deratedbw=36108 peakbw: 83216 <7> [121.739441] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 3: num_planes=4 deratedbw=36108 peakbw: 83216 <7> [121.739556] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 0: num_planes=4 bw=34133 <7> [121.739671] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 1: num_planes=4 bw=41600 <7> [121.739784] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 2: num_planes=4 bw=51200 <7> [121.739897] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=25544 peakbw: 38416 <7> [121.740036] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816 <7> [121.740174] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [121.740288] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [121.740401] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 0: num_planes=0 bw=34133 <7> [121.740512] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 1: num_planes=0 bw=41600 <7> [121.740616] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 2: num_planes=0 bw=51200 <7> [121.740719] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=27900 peakbw: 38416 <7> [121.740827] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816 <7> [121.740937] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [121.741251] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [121.741370] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 0: num_planes=0 bw=34133 <7> [121.741474] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 1: num_planes=0 bw=41600 <7> [121.741579] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 2: num_planes=0 bw=51200 <7> [121.741682] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=29248 peakbw: 38416 <7> [121.741783] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816 <7> [121.741884] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [121.741987] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [121.742106] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 0: num_planes=0 bw=34133 <7> [121.742213] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 1: num_planes=0 bw=41600 <7> [121.742318] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 2: num_planes=0 bw=51200 <7> [121.742427] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=29972 peakbw: 38416 <7> [121.742532] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816 <7> [121.742635] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [121.742736] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [121.742868] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 0: num_planes=0 bw=34133 <7> [121.742989] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 1: num_planes=0 bw=41600 <7> [121.743183] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 2: num_planes=0 bw=51200 <7> [121.744521] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [121.744741] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 251 <7> [121.744926] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7> [121.745119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7> [121.745291] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7> [121.745451] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [121.745596] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7> [121.745737] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7> [121.745869] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7> [121.746015] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [121.746148] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7> [121.746274] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7> [121.746401] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7> [121.746528] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [121.746654] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7> [121.746778] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [121.746902] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [121.747037] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 251 not known; assuming 39 <7> [121.747165] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [121.747294] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [121.747419] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [121.747544] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [121.747669] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [121.747791] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [121.747915] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [121.748046] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [121.748170] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7> [121.748295] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [121.748425] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7> [121.748567] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [121.748721] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [121.748860] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7> [121.749041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [121.749286] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.749438] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [121.749581] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.749721] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [121.749848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [121.749998] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [121.750147] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [121.750370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [121.750509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [121.750642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [121.750807] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.750956] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [121.751110] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [121.751261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [121.751419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [121.751590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7> [121.751759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7> [121.751925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7> [121.752094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7> [121.752370] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/adlp_dmc.bin <7> [121.753987] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [121.754989] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 35 us <7> [121.755160] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec) <7> [121.755305] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 54 (54.0 usec) <7> [121.755477] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 83 (83.0 usec) <7> [121.755639] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 106 (106.0 usec) <7> [121.755788] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 168 (168.0 usec) <7> [121.755940] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 168 (168.0 usec) <6> [121.758489] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.20) <7> [121.759435] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7> [121.762713] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [121.762952] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind <6> [121.763191] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) <7> [121.763349] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7> [121.763536] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7> [121.763756] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7> [121.763925] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7> [121.764141] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [121.764318] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [121.764482] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [121.764642] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [121.764807] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [121.764972] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [121.765170] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [121.765322] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [121.765483] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [121.765670] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7> [121.766066] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [121.766238] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [121.766388] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [121.766531] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [121.766665] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [121.766951] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [121.767305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [121.767840] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7> [121.768019] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [121.768307] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [121.768473] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [121.768725] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [121.768891] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [122.005021] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.034018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.063018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.092018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.121018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.150018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.179021] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.208019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.237018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.266021] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.295019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.324019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.353018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.382018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.411020] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.440018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.469019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.498018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.527019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.556018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.585019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.614018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.643020] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.672018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.701019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.730019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.759019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.788018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.817036] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.846021] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.875018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.904018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [122.904175] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [122.904202] i915 0000:00:02.0: [drm] [ENCODER:235:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [122.904263] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7> [122.904470] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [122.904571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [122.904844] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI B/PHY B] using AUX B (VBT) <7> [122.904962] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:235:DDI B/PHY B] <7> [122.905437] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:235:DDI B/PHY B] <7> [122.905571] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:235:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7> [122.905823] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:254:DDI TC1/PHY TC1] using AUX D (VBT) <7> [122.906427] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7> [122.906670] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:254:DDI TC1/PHY TC1] <7> [122.906997] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:263:DDI TC2/PHY TC2] using AUX E (VBT) <7> [122.907294] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7> [122.907489] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:263:DDI TC2/PHY TC2] <7> [122.907762] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port F is not present <7> [122.907905] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port G is not present <7> [122.908368] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled <7> [122.908609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7> [122.908839] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7> [122.909078] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7> [122.909212] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [122.909345] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7> [122.909477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7> [122.909609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7> [122.909740] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7> [122.909871] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7> [122.910002] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7> [122.910171] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7> [122.910302] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7> [122.910434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7> [122.910586] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7> [122.910725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7> [122.910854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7> [122.910986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7> [122.911147] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7> [122.911278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7> [122.911407] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7> [122.911536] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7> [122.911665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7> [122.911795] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7> [122.911924] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7> [122.912063] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7> [122.912193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7> [122.912322] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7> [122.912453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI B/PHY B] hw state readout: disabled, pipe A <7> [122.912576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:237:DP-MST A] hw state readout: disabled, pipe A <7> [122.912698] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:238:DP-MST B] hw state readout: disabled, pipe B <7> [122.912821] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:239:DP-MST C] hw state readout: disabled, pipe C <7> [122.912944] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:240:DP-MST D] hw state readout: disabled, pipe D <7> [122.913169] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7> [122.913292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:254:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [122.913395] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:256:DP-MST A] hw state readout: disabled, pipe A <7> [122.913499] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:257:DP-MST B] hw state readout: disabled, pipe B <7> [122.913601] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:258:DP-MST C] hw state readout: disabled, pipe C <7> [122.913699] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:259:DP-MST D] hw state readout: disabled, pipe D <7> [122.913809] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7> [122.913905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:263:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [122.914000] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST A] hw state readout: disabled, pipe A <7> [122.914125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST B] hw state readout: disabled, pipe B <7> [122.914222] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST C] hw state readout: disabled, pipe C <7> [122.914318] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:268:DP-MST D] hw state readout: disabled, pipe D <7> [122.914423] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [122.914531] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [122.914637] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 0 <7> [122.914741] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [122.914842] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [122.914942] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [122.915061] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [122.915245] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:DP-1] hw state readout: disabled <7> [122.915359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:249:HDMI-A-1] hw state readout: disabled <7> [122.915469] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:255:DP-2] hw state readout: disabled <7> [122.915574] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:264:DP-3] hw state readout: disabled <7> [122.915673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [122.915772] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7> [122.915916] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7> [122.916051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7> [122.916148] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7> [122.916245] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7> [122.916344] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [122.916453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7> [122.916552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7> [122.916647] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7> [122.916745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7> [122.916840] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7> [122.916931] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7> [122.917032] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [122.917140] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7> [122.917240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7> [122.917338] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7> [122.917436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7> [122.917531] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7> [122.917626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7> [122.917725] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [122.917834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7> [122.917932] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7> [122.918040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7> [122.918141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7> [122.918239] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7> [122.918335] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7> [122.918428] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7> [122.918591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state] <7> [122.918701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7> [122.918840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7> [122.918952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7> [122.919111] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [122.919211] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [122.919308] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [122.919400] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [122.926271] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [592K, 1420K) <7> [122.926384] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [122.926462] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [122.926547] MCR Steering: Default steering: group=0x0, instance=0x0 <7> [122.926557] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7> [122.927204] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 11 engine workarounds on rcs'0 <7> [122.927310] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0 <7> [122.927410] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7> [122.928093] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7> [122.928197] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0 <7> [122.928292] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0 <7> [122.928687] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7> [122.928788] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0 <7> [122.929098] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7> [122.929193] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'2 <7> [122.929470] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7> [122.929567] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0 <7> [122.930442] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [122.930564] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 12 ext-regs. <7> [122.930697] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 8 KB for temporary ADS regset <7> [122.947075] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x16304f <7> [122.947204] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x44000 <7> [122.947308] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7> [122.947408] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [122.947508] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0xac8 <7> [122.947609] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x46aa000c <7> [122.947707] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [122.947807] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [122.947907] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [122.948004] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [122.948122] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [122.948220] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [122.948319] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [122.948418] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [122.948516] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [122.950215] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.5.1 <6> [122.950218] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 <7> [122.969142] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 17ms, freq = 850MHz, before = 850MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [122.969907] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [122.971543] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads <6> [122.972757] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6> [122.972760] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6> [122.973435] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7> [122.978649] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping <7> [122.978761] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7> [122.978862] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7> [122.978955] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7> [122.979067] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [122.979184] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [122.979784] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [122.979863] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [122.979938] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [122.980023] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7> [122.980100] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [122.983083] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [122.983936] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:DP-1] generating connector hotplug event <7> [122.984192] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:249:HDMI-A-1] generating connector hotplug event <7> [122.984415] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7> [122.984840] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:255:DP-2] generating connector hotplug event <7> [122.985135] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-3 <7> [122.985626] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:264:DP-3] generating connector hotplug event <6> [122.985656] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [122.987273] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <6> [122.995489] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [122.998241] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 <7> [122.999206] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [122.999354] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=448 <7> [122.999736] [drm:drm_client_modeset_probe] <7> [122.999774] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] <7> [122.999737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A <7> [122.999797] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [123.000060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7> [123.000285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7> [123.000412] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [123.000476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7> [123.000582] i915 device info: pciid=0x46aa rev=0x0c platform=ALDERLAKE_P (subplatform=0x0) gen=12 <7> [123.000586] i915 device info: graphics version: 12 <7> [123.000588] i915 device info: media version: 12 <7> [123.000590] i915 device info: display version: 13 <7> [123.000592] i915 device info: graphics stepping: C0 <7> [123.000594] i915 device info: media stepping: C0 <7> [123.000595] i915 device info: display stepping: D0 <7> [123.000597] i915 device info: base die stepping: ** <7> [123.000598] i915 device info: gt: 0 <7> [123.000600] i915 device info: memory-regions: 0x21 <7> [123.000602] i915 device info: page-sizes: 0x211000 <7> [123.000603] i915 device info: platform: ALDERLAKE_P <7> [123.000605] i915 device info: ppgtt-size: 48 <7> [123.000607] i915 device info: ppgtt-type: 2 <7> [123.000609] i915 device info: dma_mask_size: 39 <7> [123.000611] i915 device info: is_mobile: no <7> [123.000613] i915 device info: is_lp: no <7> [123.000615] i915 device info: require_force_probe: no <7> [123.000617] i915 device info: is_dgfx: no <7> [123.000619] i915 device info: has_64bit_reloc: yes <7> [123.000621] i915 device info: has_64k_pages: no <7> [123.000623] i915 device info: gpu_reset_clobbers_display: no <7> [123.000625] i915 device info: has_reset_engine: yes <7> [123.000627] i915 device info: has_3d_pipeline: yes <7> [123.000629] i915 device info: has_4tile: no <7> [123.000631] i915 device info: has_flat_ccs: no <7> [123.000633] i915 device info: has_global_mocs: yes <7> [123.000635] i915 device info: has_gmd_id: no <7> [123.000649] i915 device info: has_gt_uc: yes <7> [123.000651] i915 device info: has_heci_pxp: no <7> [123.000653] i915 device info: has_heci_gscfi: no <7> [123.000655] i915 device info: has_guc_deprivilege: no <7> [123.000657] i915 device info: has_l3_ccs_read: no <7> [123.000659] i915 device info: has_l3_dpf: no <7> [123.000661] i915 device info: has_llc: yes <7> [123.000664] i915 device info: has_logical_ring_contexts: yes <7> [123.000666] i915 device info: has_logical_ring_elsq: yes <7> [123.000668] i915 device info: has_media_ratio_mode: no <7> [123.000670] i915 device info: has_mslice_steering: no <7> [123.000673] i915 device info: has_oa_bpc_reporting: no <7> [123.000675] i915 device info: has_oa_slice_contrib_limits: no <7> [123.000677] i915 device info: has_oam: no <7> [123.000679] i915 device info: has_one_eu_per_fuse_bit: no <7> [123.000681] i915 device info: has_pxp: yes <7> [123.000683] i915 device info: has_rc6: yes <7> [123.000686] i915 device info: has_rc6p: no <7> [123.000688] i915 device info: has_rps: yes <7> [123.000690] i915 device info: has_runtime_pm: yes <7> [123.000692] i915 device info: has_snoop: no <7> [123.000697] i915 device info: has_coherent_ggtt: no <7> [123.000699] i915 device info: tuning_thread_rr_after_dep: no <7> [123.000701] i915 device info: unfenced_needs_alignment: no <7> [123.000704] i915 device info: hws_needs_physical: no <7> [123.000706] i915 device info: has_pooled_eu: no <7> [123.000709] i915 device info: cursor_needs_physical: no <7> [123.000711] i915 device info: has_cdclk_crawl: yes <7> [123.000713] i915 device info: has_cdclk_squash: no <7> [123.000715] i915 device info: has_ddi: yes <7> [123.000720] i915 device info: has_dp_mst: yes <7> [123.000722] i915 device info: has_dsb: yes <7> [123.000724] i915 device info: has_fpga_dbg: yes <7> [123.000726] i915 device info: has_gmch: no <7> [123.000729] i915 device info: has_hotplug: yes <7> [123.000731] i915 device info: has_hti: no <7> [123.000733] i915 device info: has_ipc: yes <7> [123.000736] i915 device info: has_overlay: no <7> [123.000738] i915 device info: has_psr: yes <7> [123.000740] i915 device info: has_psr_hw_tracking: no <7> [123.000743] i915 device info: overlay_needs_physical: no <7> [123.000745] i915 device info: supports_tv: no <7> [123.000747] i915 device info: has_hdcp: yes <7> [123.000749] i915 device info: has_dmc: yes <7> [123.000752] i915 device info: has_dsc: yes <7> [123.000754] i915 device info: rawclk rate: 19200 kHz <7> [123.000757] i915 device info: iommu: enabled <7> [123.000671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [123.000759] i915 device info: available engines: 41403 <7> [123.000762] i915 device info: slice total: 1, mask=0001 <7> [123.000764] i915 device info: subslice total: 6 <7> [123.000766] i915 device info: slice0: 6 subslices, mask=0000003f <7> [123.000769] i915 device info: EU total: 96 <7> [123.000771] i915 device info: EU per subslice: 16 <7> [123.000773] i915 device info: has slice power gating: yes <7> [123.000775] i915 device info: has subslice power gating: no <7> [123.000777] i915 device info: has EU power gating: no <6> [123.000779] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [123.000781] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [123.000783] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [123.000851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [123.001116] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.001376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.001905] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] status updated from unknown to disconnected <7> [123.002166] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected <7> [123.002187] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] <7> [123.002205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [123.002603] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] status updated from unknown to disconnected <7> [123.002625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected <7> [123.002642] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] <7> [123.002658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [123.003143] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] status updated from unknown to disconnected <7> [123.003165] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected <7> [123.003182] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] <7> [123.003199] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [123.003645] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] status updated from unknown to disconnected <7> [123.003666] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected <7> [123.003681] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [123.003687] [drm:drm_client_modeset_probe] connector 236 enabled? no <7> [123.003691] [drm:drm_client_modeset_probe] connector 249 enabled? no <7> [123.003694] [drm:drm_client_modeset_probe] connector 255 enabled? no <7> [123.003697] [drm:drm_client_modeset_probe] connector 264 enabled? no <7> [123.003735] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [123.003748] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [123.003766] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [123.003786] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [123.004252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [123.004612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.004858] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.005128] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.005338] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.005530] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.005758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [123.005952] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.006153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.007203] [drm:drm_client_modeset_probe] <7> [123.007245] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] <7> [123.007267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <6> [123.007486] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <7> [123.007666] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected <7> [123.007685] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] <7> [123.007703] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [123.008197] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected <7> [123.008215] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] <7> [123.008231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [123.008707] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected <7> [123.008724] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] <7> [123.008740] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [123.009238] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected <7> [123.009255] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [123.009259] [drm:drm_client_modeset_probe] connector 236 enabled? no <7> [123.009263] [drm:drm_client_modeset_probe] connector 249 enabled? no <7> [123.009266] [drm:drm_client_modeset_probe] connector 255 enabled? no <7> [123.009269] [drm:drm_client_modeset_probe] connector 264 enabled? no <7> [123.009302] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [123.009315] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [123.009332] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [123.009353] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [123.009585] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7> [123.009705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [123.010062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.010301] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.010512] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.010721] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.010895] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.011044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [123.011809] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [123.052877] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [123.053063] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [123.053195] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [123.053322] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [123.053447] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [123.053568] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [123.053688] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [123.053807] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [123.053925] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [123.054071] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [123.054246] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [123.054417] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [123.054551] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [123.054671] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [123.054794] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [123.054915] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [123.055044] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [123.055165] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [123.055287] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [123.055406] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [123.055552] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [123.055732] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [123.055909] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [123.056083] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [123.056215] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [123.056336] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [123.056459] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [123.056579] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [123.056699] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [123.056822] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [123.056941] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [123.057084] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [123.057260] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [123.057435] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [123.057560] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [123.057681] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <6> [123.061878] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <6> [123.062604] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 <6> [123.063475] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 <6> [123.063931] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 <7> [124.020480] [IGT] core_hotunplug: reopening DRM device for health check <7> [124.020510] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [124.020820] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [124.023240] [IGT] core_hotunplug: running device sysfs healthcheck <7> [124.023335] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [124.023537] [IGT] core_hotunplug: closing health checked device instance <7> [124.023642] [IGT] core_hotunplug: reopening render device for health check <7> [124.023662] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [124.023936] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [124.025690] [IGT] core_hotunplug: running device sysfs healthcheck <7> [124.025861] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [124.026129] [IGT] core_hotunplug: closing health checked device instance <6> [124.026214] [IGT] core_hotunplug: finished subtest unbind-rebind, SUCCESS <6> [124.026611] [IGT] core_hotunplug: exiting, ret=0

<6> [120.247366] Console: switching to colour dummy device 80x25

<6> [120.247442] [IGT] core_hotunplug: executing

<7> [120.250154] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [120.250843] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]

<7> [120.251102] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [120.252195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [120.256455] [IGT] core_hotunplug: closing selected device instance

<7> [120.256817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [120.257162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [120.257348] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [120.257535] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [120.257696] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [120.257843] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [120.258024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [120.258180] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [120.258308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<6> [120.259064] [IGT] core_hotunplug: starting subtest unbind-rebind

<7> [120.361366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [121.268897] [IGT] core_hotunplug: reopening DRM device for health check

<7> [121.268924] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [121.269342] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [121.269763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [121.273050] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [121.273121] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [121.273299] [IGT] core_hotunplug: closing health checked device instance

<7> [121.273672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [121.273963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [121.274131] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.274268] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [121.274391] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.274513] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [121.274641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [121.274754] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [121.274859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [121.275438] [IGT] core_hotunplug: reopening render device for health check

<7> [121.275463] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [121.275744] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [121.278633] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [121.278766] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [121.278972] [IGT] core_hotunplug: closing health checked device instance

<7> [121.279316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [121.279605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [121.279749] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.279876] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [121.280001] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.280145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [121.280271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [121.280383] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [121.280490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [121.324549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [121.324922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [121.325113] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.325248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [121.325375] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.325496] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [121.325603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [121.325765] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [121.339145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [121.339288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [121.339405] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [121.339509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [121.368713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [121.369347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [121.369920] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.370286] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [121.370602] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.370893] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [121.371194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [121.371464] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [121.384883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [121.385176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [121.385395] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [121.385599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [121.430500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [121.430891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [121.431109] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.431294] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [121.431451] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.431598] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [121.431730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [121.431934] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [121.451000] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [121.451158] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [121.451276] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [121.451385] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [121.451491] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [121.451596] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [121.451702] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [121.451808] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [121.451911] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [121.452032] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [121.452248] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [121.452411] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [121.452543] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [121.452678] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [121.452821] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [121.452972] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [121.453176] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [121.453332] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [121.453444] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [121.453563] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [121.453677] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [121.453786] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [121.453892] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [121.453997] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [121.454131] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [121.454241] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [121.454347] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [121.454456] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [121.454562] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [121.454665] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [121.454769] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [121.454877] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [121.454981] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [121.455100] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [121.455205] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [121.455312] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [121.456104] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [121.456234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [121.456350] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [121.456455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [121.526398] [IGT] core_hotunplug: unbinding the driver from the device

<7> [121.526815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [121.528181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [121.529069] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.529622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [121.530151] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.530604] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [121.531005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [121.531504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A

<7> [121.532045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B

<7> [121.532425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C

<7> [121.532747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D

<7> [121.563167] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [121.634162] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<7> [121.635074] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<7> [121.733538] [IGT] core_hotunplug: rebinding the driver to the device

<7> [121.734414] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K

<7> [121.734541] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes)

<7> [121.734670] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Alder Lake PCH

<7> [121.734802] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [121.735171] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 19200 kHz

<7> [121.735261] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005

<7> [121.735332] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001

<7> [121.735679] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [121.735770] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [121.735843] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M

<6> [121.735914] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [121.735940] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [121.736252] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [121.736265] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000050200087

<7> [121.736383] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K

<7> [121.736792] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x44a07018

<7> [121.736917] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0

<7> [121.737037] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [121.737160] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [121.737267] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [121.737383] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [121.737499] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 4

<7> [121.737574] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [121.737668] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2401 tRP=24 tRDPRE=20 tRAS=52 tRCD=24 tRC=76

<7> [121.737794] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=4801 tRP=44 tRDPRE=28 tRAS=104 tRCD=44 tRC=148

<7> [121.737911] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=5201 tRP=48 tRDPRE=28 tRAS=112 tRCD=48 tRC=160

<7> [121.738063] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5201 tRP=48 tRDPRE=28 tRAS=112 tRCD=48 tRC=160

<7> [121.738175] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 0: CLK=32

<7> [121.738266] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 1: CLK=39

<7> [121.738356] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 2: CLK=48

<7> [121.738445] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=16956 peakbw: 38416

<7> [121.738533] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=23981 peakbw: 76816

<7> [121.738623] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=24772 peakbw: 83216

<7> [121.738713] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 3: num_planes=0 deratedbw=24772 peakbw: 83216

<7> [121.738801] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 0: num_planes=0 bw=34133

<7> [121.738890] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 1: num_planes=0 bw=41600

<7> [121.738985] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 2: num_planes=0 bw=51200

<7> [121.739106] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=21855 peakbw: 38416

<7> [121.739221] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=4 deratedbw=34500 peakbw: 76816

<7> [121.739336] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=4 deratedbw=36108 peakbw: 83216

<7> [121.739441] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 3: num_planes=4 deratedbw=36108 peakbw: 83216

<7> [121.739556] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 0: num_planes=4 bw=34133

<7> [121.739671] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 1: num_planes=4 bw=41600

<7> [121.739784] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 2: num_planes=4 bw=51200

<7> [121.739897] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=25544 peakbw: 38416

<7> [121.740036] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816

<7> [121.740174] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [121.740288] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [121.740401] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 0: num_planes=0 bw=34133

<7> [121.740512] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 1: num_planes=0 bw=41600

<7> [121.740616] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 2: num_planes=0 bw=51200

<7> [121.740719] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=27900 peakbw: 38416

<7> [121.740827] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816

<7> [121.740937] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [121.741251] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [121.741370] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 0: num_planes=0 bw=34133

<7> [121.741474] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 1: num_planes=0 bw=41600

<7> [121.741579] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 2: num_planes=0 bw=51200

<7> [121.741682] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=29248 peakbw: 38416

<7> [121.741783] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816

<7> [121.741884] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [121.741987] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [121.742106] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 0: num_planes=0 bw=34133

<7> [121.742213] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 1: num_planes=0 bw=41600

<7> [121.742318] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 2: num_planes=0 bw=51200

<7> [121.742427] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=29972 peakbw: 38416

<7> [121.742532] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816

<7> [121.742635] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [121.742736] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [121.742868] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 0: num_planes=0 bw=34133

<7> [121.742989] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 1: num_planes=0 bw=41600

<7> [121.743183] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 2: num_planes=0 bw=51200

<7> [121.744521] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [121.744741] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 251

<7> [121.744926] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7)

<7> [121.745119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5)

<7> [121.745291] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)

<7> [121.745451] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [121.745596] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812)

<7> [121.745737] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)

<7> [121.745869] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers

<7> [121.746015] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [121.746148] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366)

<7> [121.746274] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)

<7> [121.746401] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78)

<7> [121.746528] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [121.746654] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)

<7> [121.746778] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [121.746902] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [121.747037] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 251 not known; assuming 39

<7> [121.747165] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [121.747294] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [121.747419] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [121.747544] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [121.747669] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [121.747791] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [121.747915] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [121.748046] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [121.748170] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0

<7> [121.748295] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [121.748425] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0

<7> [121.748567] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [121.748721] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [121.748860] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a

<7> [121.749041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [121.749286] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.749438] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [121.749581] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.749721] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [121.749848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [121.749998] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [121.750147] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [121.750370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [121.750509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [121.750642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [121.750807] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.750956] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [121.751110] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [121.751261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [121.751419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [121.751590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A

<7> [121.751759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B

<7> [121.751925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C

<7> [121.752094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D

<7> [121.752370] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/adlp_dmc.bin

<7> [121.753987] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [121.754989] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 35 us

<7> [121.755160] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec)

<7> [121.755305] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 54 (54.0 usec)

<7> [121.755477] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 83 (83.0 usec)

<7> [121.755639] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 106 (106.0 usec)

<7> [121.755788] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 168 (168.0 usec)

<7> [121.755940] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 168 (168.0 usec)

<6> [121.758489] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.20)

<7> [121.759435] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available.

<7> [121.762713] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [121.762952] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind

<6> [121.763191] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])

<7> [121.763349] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz

<7> [121.763536] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz

<7> [121.763756] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT)

<7> [121.763925] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A]

<7> [121.764141] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [121.764318] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [121.764482] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [121.764642] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [121.764807] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [121.764972] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [121.765170] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [121.765322] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [121.765483] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [121.765670] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0

<7> [121.766066] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [121.766238] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [121.766388] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [121.766531] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [121.766665] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [121.766951] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [121.767305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [121.767840] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on

<7> [121.768019] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [121.768307] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [121.768473] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [121.768725] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [121.768891] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [122.005021] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.034018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.063018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.092018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.121018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.150018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.179021] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.208019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.237018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.266021] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.295019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.324019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.353018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.382018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.411020] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.440018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.469019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.498018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.527019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.556018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.585019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.614018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.643020] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.672018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.701019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.730019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.759019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.788018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.817036] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.846021] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.875018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.904018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [122.904175] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [122.904202] i915 0000:00:02.0: [drm] [ENCODER:235:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [122.904263] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off

<7> [122.904470] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [122.904571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [122.904844] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI B/PHY B] using AUX B (VBT)

<7> [122.904962] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:235:DDI B/PHY B]

<7> [122.905437] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:235:DDI B/PHY B]

<7> [122.905571] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:235:DDI B/PHY B] Using DDC pin 0x2 (VBT)

<7> [122.905823] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:254:DDI TC1/PHY TC1] using AUX D (VBT)

<7> [122.906427] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)

<7> [122.906670] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:254:DDI TC1/PHY TC1]

<7> [122.906997] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:263:DDI TC2/PHY TC2] using AUX E (VBT)

<7> [122.907294] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)

<7> [122.907489] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:263:DDI TC2/PHY TC2]

<7> [122.907762] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port F is not present

<7> [122.907905] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port G is not present

<7> [122.908368] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled

<7> [122.908609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled

<7> [122.908839] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled

<7> [122.909078] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled

<7> [122.909212] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [122.909345] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A

<7> [122.909477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A

<7> [122.909609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A

<7> [122.909740] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A

<7> [122.909871] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A

<7> [122.910002] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B

<7> [122.910171] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B

<7> [122.910302] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B

<7> [122.910434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B

<7> [122.910586] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B

<7> [122.910725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B

<7> [122.910854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C

<7> [122.910986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C

<7> [122.911147] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C

<7> [122.911278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C

<7> [122.911407] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C

<7> [122.911536] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C

<7> [122.911665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D

<7> [122.911795] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D

<7> [122.911924] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D

<7> [122.912063] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D

<7> [122.912193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D

<7> [122.912322] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D

<7> [122.912453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [122.912576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:237:DP-MST A] hw state readout: disabled, pipe A

<7> [122.912698] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:238:DP-MST B] hw state readout: disabled, pipe B

<7> [122.912821] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:239:DP-MST C] hw state readout: disabled, pipe C

<7> [122.912944] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:240:DP-MST D] hw state readout: disabled, pipe D

<7> [122.913169] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected)

<7> [122.913292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:254:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [122.913395] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:256:DP-MST A] hw state readout: disabled, pipe A

<7> [122.913499] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:257:DP-MST B] hw state readout: disabled, pipe B

<7> [122.913601] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:258:DP-MST C] hw state readout: disabled, pipe C

<7> [122.913699] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:259:DP-MST D] hw state readout: disabled, pipe D

<7> [122.913809] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected)

<7> [122.913905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:263:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [122.914000] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST A] hw state readout: disabled, pipe A

<7> [122.914125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST B] hw state readout: disabled, pipe B

<7> [122.914222] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST C] hw state readout: disabled, pipe C

<7> [122.914318] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:268:DP-MST D] hw state readout: disabled, pipe D

<7> [122.914423] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [122.914531] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [122.914637] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 0

<7> [122.914741] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [122.914842] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [122.914942] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [122.915061] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [122.915245] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:DP-1] hw state readout: disabled

<7> [122.915359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:249:HDMI-A-1] hw state readout: disabled

<7> [122.915469] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:255:DP-2] hw state readout: disabled

<7> [122.915574] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:264:DP-3] hw state readout: disabled

<7> [122.915673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [122.915772] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz

<7> [122.915916] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz

<7> [122.916051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz

<7> [122.916148] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz

<7> [122.916245] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz

<7> [122.916344] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [122.916453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz

<7> [122.916552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz

<7> [122.916647] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz

<7> [122.916745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz

<7> [122.916840] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz

<7> [122.916931] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz

<7> [122.917032] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [122.917140] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz

<7> [122.917240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz

<7> [122.917338] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz

<7> [122.917436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz

<7> [122.917531] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz

<7> [122.917626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz

<7> [122.917725] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [122.917834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz

<7> [122.917932] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz

<7> [122.918040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz

<7> [122.918141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz

<7> [122.918239] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz

<7> [122.918335] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz

<7> [122.918428] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0

<7> [122.918591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state]

<7> [122.918701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state]

<7> [122.918840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state]

<7> [122.918952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state]

<7> [122.919111] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [122.919211] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [122.919308] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [122.919400] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [122.926271] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [592K, 1420K)

<7> [122.926384] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [122.926462] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [122.926547] MCR Steering: Default steering: group=0x0, instance=0x0

<7> [122.926557] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global

<7> [122.927204] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 11 engine workarounds on rcs'0

<7> [122.927310] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0

<7> [122.927410] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0

<7> [122.928093] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0

<7> [122.928197] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0

<7> [122.928292] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0

<7> [122.928687] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0

<7> [122.928788] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0

<7> [122.929098] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2

<7> [122.929193] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'2

<7> [122.929470] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0

<7> [122.929567] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0

<7> [122.930442] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [122.930564] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 12 ext-regs.

<7> [122.930697] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 8 KB for temporary ADS regset

<7> [122.947075] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x16304f

<7> [122.947204] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x44000

<7> [122.947308] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4

<7> [122.947408] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [122.947508] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0xac8

<7> [122.947609] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x46aa000c

<7> [122.947707] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [122.947807] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [122.947907] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [122.948004] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [122.948122] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [122.948220] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [122.948319] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [122.948418] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [122.948516] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [122.950215] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.5.1

<6> [122.950218] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3

<7> [122.969142] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 17ms, freq = 850MHz, before = 850MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [122.969907] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [122.971543] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads

<6> [122.972757] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled

<6> [122.972760] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled

<6> [122.973435] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled

<7> [122.978649] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping

<7> [122.978761] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping

<7> [122.978862] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping

<7> [122.978955] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping

<7> [122.979067] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [122.979184] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [122.979784] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [122.979863] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [122.979938] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [122.980023] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1

<7> [122.980100] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [122.983083] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [122.983936] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:DP-1] generating connector hotplug event

<7> [122.984192] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:249:HDMI-A-1] generating connector hotplug event

<7> [122.984415] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2

<7> [122.984840] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:255:DP-2] generating connector hotplug event

<7> [122.985135] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-3

<7> [122.985626] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:264:DP-3] generating connector hotplug event

<6> [122.985656] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [122.987273] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<6> [122.995489] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [122.998241] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

<7> [122.999206] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [122.999354] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=448

<7> [122.999736] [drm:drm_client_modeset_probe]

<7> [122.999774] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1]

<7> [122.999737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A

<7> [122.999797] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [123.000060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B

<7> [123.000285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C

<7> [123.000412] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [123.000476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D

<7> [123.000582] i915 device info: pciid=0x46aa rev=0x0c platform=ALDERLAKE_P (subplatform=0x0) gen=12

<7> [123.000586] i915 device info: graphics version: 12

<7> [123.000588] i915 device info: media version: 12

<7> [123.000590] i915 device info: display version: 13

<7> [123.000592] i915 device info: graphics stepping: C0

<7> [123.000594] i915 device info: media stepping: C0

<7> [123.000595] i915 device info: display stepping: D0

<7> [123.000597] i915 device info: base die stepping: **

<7> [123.000598] i915 device info: gt: 0

<7> [123.000600] i915 device info: memory-regions: 0x21

<7> [123.000602] i915 device info: page-sizes: 0x211000

<7> [123.000603] i915 device info: platform: ALDERLAKE_P

<7> [123.000605] i915 device info: ppgtt-size: 48

<7> [123.000607] i915 device info: ppgtt-type: 2

<7> [123.000609] i915 device info: dma_mask_size: 39

<7> [123.000611] i915 device info: is_mobile: no

<7> [123.000613] i915 device info: is_lp: no

<7> [123.000615] i915 device info: require_force_probe: no

<7> [123.000617] i915 device info: is_dgfx: no

<7> [123.000619] i915 device info: has_64bit_reloc: yes

<7> [123.000621] i915 device info: has_64k_pages: no

<7> [123.000623] i915 device info: gpu_reset_clobbers_display: no

<7> [123.000625] i915 device info: has_reset_engine: yes

<7> [123.000627] i915 device info: has_3d_pipeline: yes

<7> [123.000629] i915 device info: has_4tile: no

<7> [123.000631] i915 device info: has_flat_ccs: no

<7> [123.000633] i915 device info: has_global_mocs: yes

<7> [123.000635] i915 device info: has_gmd_id: no

<7> [123.000649] i915 device info: has_gt_uc: yes

<7> [123.000651] i915 device info: has_heci_pxp: no

<7> [123.000653] i915 device info: has_heci_gscfi: no

<7> [123.000655] i915 device info: has_guc_deprivilege: no

<7> [123.000657] i915 device info: has_l3_ccs_read: no

<7> [123.000659] i915 device info: has_l3_dpf: no

<7> [123.000661] i915 device info: has_llc: yes

<7> [123.000664] i915 device info: has_logical_ring_contexts: yes

<7> [123.000666] i915 device info: has_logical_ring_elsq: yes

<7> [123.000668] i915 device info: has_media_ratio_mode: no

<7> [123.000670] i915 device info: has_mslice_steering: no

<7> [123.000673] i915 device info: has_oa_bpc_reporting: no

<7> [123.000675] i915 device info: has_oa_slice_contrib_limits: no

<7> [123.000677] i915 device info: has_oam: no

<7> [123.000679] i915 device info: has_one_eu_per_fuse_bit: no

<7> [123.000681] i915 device info: has_pxp: yes

<7> [123.000683] i915 device info: has_rc6: yes

<7> [123.000686] i915 device info: has_rc6p: no

<7> [123.000688] i915 device info: has_rps: yes

<7> [123.000690] i915 device info: has_runtime_pm: yes

<7> [123.000692] i915 device info: has_snoop: no

<7> [123.000697] i915 device info: has_coherent_ggtt: no

<7> [123.000699] i915 device info: tuning_thread_rr_after_dep: no

<7> [123.000701] i915 device info: unfenced_needs_alignment: no

<7> [123.000704] i915 device info: hws_needs_physical: no

<7> [123.000706] i915 device info: has_pooled_eu: no

<7> [123.000709] i915 device info: cursor_needs_physical: no

<7> [123.000711] i915 device info: has_cdclk_crawl: yes

<7> [123.000713] i915 device info: has_cdclk_squash: no

<7> [123.000715] i915 device info: has_ddi: yes

<7> [123.000720] i915 device info: has_dp_mst: yes

<7> [123.000722] i915 device info: has_dsb: yes

<7> [123.000724] i915 device info: has_fpga_dbg: yes

<7> [123.000726] i915 device info: has_gmch: no

<7> [123.000729] i915 device info: has_hotplug: yes

<7> [123.000731] i915 device info: has_hti: no

<7> [123.000733] i915 device info: has_ipc: yes

<7> [123.000736] i915 device info: has_overlay: no

<7> [123.000738] i915 device info: has_psr: yes

<7> [123.000740] i915 device info: has_psr_hw_tracking: no

<7> [123.000743] i915 device info: overlay_needs_physical: no

<7> [123.000745] i915 device info: supports_tv: no

<7> [123.000747] i915 device info: has_hdcp: yes

<7> [123.000749] i915 device info: has_dmc: yes

<7> [123.000752] i915 device info: has_dsc: yes

<7> [123.000754] i915 device info: rawclk rate: 19200 kHz

<7> [123.000757] i915 device info: iommu: enabled

<7> [123.000671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [123.000759] i915 device info: available engines: 41403

<7> [123.000762] i915 device info: slice total: 1, mask=0001

<7> [123.000764] i915 device info: subslice total: 6

<7> [123.000766] i915 device info: slice0: 6 subslices, mask=0000003f

<7> [123.000769] i915 device info: EU total: 96

<7> [123.000771] i915 device info: EU per subslice: 16

<7> [123.000773] i915 device info: has slice power gating: yes

<7> [123.000775] i915 device info: has subslice power gating: no

<7> [123.000777] i915 device info: has EU power gating: no

<6> [123.000779] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [123.000781] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [123.000783] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [123.000851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [123.001116] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.001376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.001905] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] status updated from unknown to disconnected

<7> [123.002166] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected

<7> [123.002187] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1]

<7> [123.002205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [123.002603] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] status updated from unknown to disconnected

<7> [123.002625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected

<7> [123.002642] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2]

<7> [123.002658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [123.003143] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] status updated from unknown to disconnected

<7> [123.003165] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected

<7> [123.003182] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3]

<7> [123.003199] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [123.003645] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] status updated from unknown to disconnected

<7> [123.003666] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected

<7> [123.003681] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [123.003687] [drm:drm_client_modeset_probe] connector 236 enabled? no

<7> [123.003691] [drm:drm_client_modeset_probe] connector 249 enabled? no

<7> [123.003694] [drm:drm_client_modeset_probe] connector 255 enabled? no

<7> [123.003697] [drm:drm_client_modeset_probe] connector 264 enabled? no

<7> [123.003735] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [123.003748] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [123.003766] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [123.003786] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [123.004252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [123.004612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.004858] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.005128] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.005338] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.005530] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.005758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [123.005952] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.006153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.007203] [drm:drm_client_modeset_probe]

<7> [123.007245] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1]

<7> [123.007267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<6> [123.007486] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100

<7> [123.007666] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected

<7> [123.007685] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1]

<7> [123.007703] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [123.008197] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected

<7> [123.008215] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2]

<7> [123.008231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [123.008707] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected

<7> [123.008724] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3]

<7> [123.008740] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [123.009238] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected

<7> [123.009255] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [123.009259] [drm:drm_client_modeset_probe] connector 236 enabled? no

<7> [123.009263] [drm:drm_client_modeset_probe] connector 249 enabled? no

<7> [123.009266] [drm:drm_client_modeset_probe] connector 255 enabled? no

<7> [123.009269] [drm:drm_client_modeset_probe] connector 264 enabled? no

<7> [123.009302] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [123.009315] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [123.009332] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [123.009353] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [123.009585] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

<7> [123.009705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [123.010062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.010301] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.010512] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.010721] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.010895] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.011044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [123.011809] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [123.052877] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [123.053063] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [123.053195] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [123.053322] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [123.053447] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [123.053568] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [123.053688] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [123.053807] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [123.053925] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [123.054071] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [123.054246] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [123.054417] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [123.054551] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [123.054671] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [123.054794] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [123.054915] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [123.055044] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [123.055165] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [123.055287] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [123.055406] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [123.055552] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [123.055732] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [123.055909] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [123.056083] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [123.056215] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [123.056336] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [123.056459] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [123.056579] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [123.056699] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [123.056822] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [123.056941] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [123.057084] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [123.057260] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [123.057435] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [123.057560] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [123.057681] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<6> [123.061878] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9

<6> [123.062604] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10

<6> [123.063475] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11

<6> [123.063931] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12

<7> [124.020480] [IGT] core_hotunplug: reopening DRM device for health check

<7> [124.020510] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [124.020820] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [124.023240] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [124.023335] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [124.023537] [IGT] core_hotunplug: closing health checked device instance

<7> [124.023642] [IGT] core_hotunplug: reopening render device for health check

<7> [124.023662] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [124.023936] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [124.025690] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [124.025861] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [124.026129] [IGT] core_hotunplug: closing health checked device instance

<6> [124.026214] [IGT] core_hotunplug: finished subtest unbind-rebind, SUCCESS

<6> [124.026611] [IGT] core_hotunplug: exiting, ret=0

Results for igt@core_hotunplug@unbind-rebind