Results for igt@i915_pm_rpm@module-reload

Result: Skip

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g2741053c5 (x86_64) (Linux: 6.5.0-rc7-linus-v6.5-rc7-g706a74159504+ x86_64)
Out	Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x7c/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa3f/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 0 i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 3 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_display_power_flush_work+0xdf/0xf0 [i915] intel_dp_detect+0x231/0x640 [i915] drm_helper_probe_detect_ctx+0x45/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] Wakeref count: 3 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_set_edid+0x3f/0x2a0 [i915] intel_hdmi_detect+0xb7/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] gmbus_xfer+0x29/0xb0 [i915] __i2c_transfer+0x17b/0x580 i2c_transfer+0x7e/0x100 drm_do_probe_ddc_edid+0xb7/0x130 drm_edid_read_ddc+0x72/0x80 intel_hdmi_set_edid+0x242/0x2a0 [i915] Test requirement not met in function __igt_unique____real_main2421, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2432: Test requirement: setup_environment(true) Subtest module-reload: SKIP (0.000s)
Err	(i915_pm_rpm:5365) igt_pm-WARNING: timeout: pm_status expected:suspended, got:active Subtest module-reload: SKIP (0.000s)
Dmesg	<6> [168.474704] [IGT] i915_pm_rpm: executing <7> [168.479715] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [168.480137] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [168.480156] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [168.480430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [168.480671] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [168.480803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [168.481401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.481743] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [168.481818] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [168.481831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [168.482005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.482497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [168.483021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [168.483739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [168.485223] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [168.486349] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [168.487108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [168.487344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [168.487518] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [168.487649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [168.488232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.488372] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [168.488436] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [168.488448] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [168.488584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.490393] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [168.490571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [168.491288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [168.491837] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [168.491844] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [168.491959] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [168.518234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [168.518239] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [168.518357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.518518] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [168.522227] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [168.522244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [168.522377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.522885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.523038] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [168.523542] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [168.523569] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [168.523698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.524164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [168.524705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [168.525258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [168.526386] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [168.527167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [168.527882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [168.528040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [168.528177] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [168.528312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [168.529447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.529640] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [168.530065] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [168.530079] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [168.530203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.531313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [168.531446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [168.532180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [168.532713] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [168.532719] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [168.532848] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [168.559602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [168.559606] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [168.559724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.559863] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [168.560186] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [168.560199] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [168.560327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.560799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.560972] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [168.560998] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [168.561010] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [168.561134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.561628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [168.562117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [168.562714] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [168.563811] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [168.564842] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [168.565597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [168.565771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [168.565907] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [168.566039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [168.566633] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.566772] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [168.566800] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [168.566812] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [168.566934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.568038] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [168.568157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [168.568848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [168.569334] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [168.569338] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [168.569451] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [168.596276] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [168.596281] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [168.596399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.596549] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [179.641608] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [179.650161] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [179.674599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [179.681052] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [179.681244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [179.682132] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [179.682168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.683333] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.684063] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [179.684654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.685089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [179.685851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [179.686572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [179.686721] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [179.686853] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [179.687436] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.687586] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [179.689123] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [179.689096] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [179.690524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [179.714957] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [179.719948] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [179.720101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.720677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [179.721264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [179.721846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [179.723535] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [179.724691] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [179.725349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [179.725655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [179.725803] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [179.725946] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [179.726554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.726728] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [179.726848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.727007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [179.727462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [179.728048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [179.728194] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [179.728334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [179.728976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.729210] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [179.729317] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [179.732785] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [179.757224] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [179.762285] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [179.762475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.762669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [179.763162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [179.763745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [179.763926] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [179.764103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [179.764741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.764980] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [179.765532] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [179.768537] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [179.792797] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [179.797583] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [179.797745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.799690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [179.799822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [179.800529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [179.801002] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [179.801007] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [179.801130] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [179.830084] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [179.830089] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [179.830205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.830513] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [179.832107] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [179.832149] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [179.833547] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [179.857937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [179.863222] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [179.863359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.863876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.864041] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [179.864062] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [179.864199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.864697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [179.865194] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [179.865785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [179.867020] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [179.868125] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [179.868904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [179.869077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [179.869224] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [179.869366] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [179.869995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.870154] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [179.870171] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [179.870306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.871426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [179.871565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [179.872265] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [179.872763] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [179.872771] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [179.872904] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [179.896388] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [179.896393] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [179.896573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.896758] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [179.897780] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [179.897827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [179.899158] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [179.923520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [179.928923] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [179.929066] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.929594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.929759] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [179.929779] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [179.929936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.930409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [179.930924] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [179.931496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [179.932527] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [179.933522] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [179.934284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [179.934443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [179.934612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [179.934752] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [179.935337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.935478] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [179.935504] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [179.935668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.936766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [179.936888] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [179.937589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [179.938098] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [179.938103] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [179.938217] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [179.963393] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [179.963397] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [179.963543] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.963734] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [179.965238] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [179.965269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [179.966518] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [179.990873] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [179.995656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [179.995790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.996266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.996419] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [179.996440] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [179.996619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.997117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [179.997644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [179.998204] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [179.999344] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.000436] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.001202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.001362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.001521] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.001663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.002251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.002396] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.002412] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.002555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.003658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.003784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.004477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.004951] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.004958] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.005078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.031340] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.031345] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.031466] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.031657] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.033182] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.033229] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.034512] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.058865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.063507] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.063635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.064125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.064271] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.064290] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.064443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.064956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.065465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.066045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.067152] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.068238] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.069017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.069180] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.069319] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.069455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.070072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.070223] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.070240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.070367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.071518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.071647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.072336] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.072857] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.072865] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.072991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.098130] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.098135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.098249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.098392] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.099908] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.099967] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.101371] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.125684] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.130526] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.130659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.131140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.131294] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.131314] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.131450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.131947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.132456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.133051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.134242] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.135363] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.136127] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.136287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.136426] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.136585] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.137181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.137326] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.137342] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.137468] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.138586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.138710] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.139443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.139926] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.139934] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.140055] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.166322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.166327] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.166445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.166671] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.168233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.168267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.169506] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.193916] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.198667] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.198805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.199268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.199437] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.199463] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.199614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.200124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.200670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.201187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.202445] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.203405] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.204180] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.204343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.204489] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.204663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.205247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.205400] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.205416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.205564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.206706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.206845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.208067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.208634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.208639] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.208767] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.235537] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.235542] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.235672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.235815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.237324] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.237370] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.239828] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.264186] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.269373] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.269506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.270016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.270195] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.270214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.270370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.270891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.271393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.271966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.273060] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.274155] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.274757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.274922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.275062] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.275198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.275810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.276019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.276035] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.276161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.277260] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.277378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.278095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.278613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.278620] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.278768] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.305047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.305052] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.305169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.305312] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.306348] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.306394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.308820] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.333232] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.337566] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.337676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.338156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.338300] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.338320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.338477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.338996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.339497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.340060] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.341188] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.342164] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.342894] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.343057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.343196] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.343331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.343941] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.344086] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.344102] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.344228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.345340] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.345470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.346182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.346696] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.346703] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.346841] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.369828] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.369833] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.369952] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.370099] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.371135] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.371181] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.372511] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.396863] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.402118] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.402238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.402727] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.402915] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.402935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.403089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.403575] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.404074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.404652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.405811] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.406847] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.407613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.407773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.407912] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.408047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.408660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.408815] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.408832] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.408960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.409646] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.409766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.410453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.410924] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.410932] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.411058] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.435113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.435119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.435237] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.435380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.436876] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.436929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.438370] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.462699] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.469168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.469280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.469779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.469962] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.469983] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.470107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.470603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.471102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.471687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.472940] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.474014] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.474773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.474933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.475072] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.475209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.475811] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.475965] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.475981] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.476107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.477216] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.477337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.478025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.478522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.478529] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.478658] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.502681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.502685] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.502817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.502960] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.504500] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.504533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.505929] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.530283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.534529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.534639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.535118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.535262] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.535283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.535408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.535939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.536433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.536991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.538121] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.539227] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.540031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.540213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.540353] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.540504] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.541111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.541253] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.541269] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.541394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.542570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.542689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.543381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.543868] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.543890] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.544044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.569779] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.569784] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.569915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.570058] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.571593] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.571638] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.573034] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.597403] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.602824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.602959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.603440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.603640] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.603682] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.603830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.604298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.604838] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.605386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.606520] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.607524] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.608287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.608449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.608610] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.608752] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.609352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.609518] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.609537] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.609666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.610770] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.610894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.611587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.612075] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.612080] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.612199] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.636811] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.636815] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.636932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.637074] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.638570] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.638617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.641335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.665735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.671173] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.671308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.671828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.671999] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.672020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.672145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.672656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.673140] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.673731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.674853] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.675950] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.676689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.676849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.676989] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.677124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.677726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.677881] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.677897] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.678023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.679125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.679245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.679938] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.680409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.680414] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.680543] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.704036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.704041] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.704157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.704301] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.705866] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.705910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.707159] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.731541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.736838] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.736971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.737462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.737638] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.737663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.737805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.738288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.738812] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.739364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.740521] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.741523] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.742287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.742446] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.742607] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.742750] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.743338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.743491] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.743514] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.743648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.744747] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.744873] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.745572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.746050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.746055] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.746183] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.773481] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.773490] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.773606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.773750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.774783] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.774831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.777445] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.801772] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.807133] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.807273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.807799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.807986] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.808006] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.808130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.808634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.809140] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.809709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.810849] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.811941] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.812688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.812849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.812988] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.813123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.813726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.813879] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.813896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.814022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.815134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.815253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.815943] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.816428] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.816433] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.816566] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.842211] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.842216] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.842335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.842481] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.844063] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.844122] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.845519] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.869876] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.874527] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.874654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.875131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.875283] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.875304] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.875439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.875962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.876472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.877067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.878254] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.879375] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.880149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.880307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.880447] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.880622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.881225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.881368] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.881384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.881527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.882735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.882857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.883580] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.884058] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.884063] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.884205] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.908278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.908283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.908397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.908581] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.910098] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.910130] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.911490] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.935816] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.940503] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.940629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.941105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.941258] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.941278] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.941413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.941939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.942448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.943043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.944231] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.945354] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.946147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.946307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.946446] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.946603] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.947200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.947346] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.947362] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.947502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.948628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.948752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.949097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.949574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.949581] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.949703] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.974290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.974295] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.974409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.974635] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.975661] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.975706] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.977070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.001409] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.006296] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.006411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.006915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.007099] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.007118] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.007245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.007731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.008240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.008831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.009944] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.011016] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.011775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.011936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.012075] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.012211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.012814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.012967] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.012984] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.013110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.014215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.014335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.015025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.015523] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.015531] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.015659] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.040274] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.040279] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.040398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.040622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.041656] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.041701] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.043055] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.067399] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.072739] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.072874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.073352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.073526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.073567] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.073716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.074186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.074711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.075273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.076520] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.077525] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.078289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.078450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.078611] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.078753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.079351] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.079514] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.079534] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.079661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.080765] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.080895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.081582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.082057] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.082062] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.082178] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.108392] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.108397] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.108546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.108732] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.109769] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.109813] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.111191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.135538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.140885] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.141017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.141547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.141714] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.141735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.141861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.142329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.142855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.143406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.144716] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.145808] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.146525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.146683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.146821] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.146957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.147571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.147726] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.147743] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.147869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.148964] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.149092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.149782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.150271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.150277] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.150396] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.176630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.176634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.176765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.176907] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.178411] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.178443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.180805] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.205152] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.209870] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.209997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.210477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.210651] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.210696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.210838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.211308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.211850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.212384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.213520] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.214525] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.215289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.215449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.215618] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.215761] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.216358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.216532] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.216564] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.216690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.218278] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.218441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.219145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.219635] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.219641] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.219792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.243863] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.243868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.243984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.244128] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.245624] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.245671] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.247085] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.271431] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.276835] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.276976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.277468] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.277665] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.277703] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.277828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.278298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.278840] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.279385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.280521] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.281525] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.282290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.282450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.282609] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.282752] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.283353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.283516] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.283536] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.283666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.284764] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.284890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.285583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.286055] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.286061] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.286180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.310726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.310731] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.310879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.311022] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.312553] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.312613] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.313998] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.338388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.343254] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.343370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.343872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.344077] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.344097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.344224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.344732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.345226] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.345794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.346955] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.348014] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.348773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.348933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.349074] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.349209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.349813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.349964] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.349981] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.350106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.351204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.351323] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.352003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.352500] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.352506] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.352634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.376714] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.376719] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.376835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.376978] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.378513] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.378535] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.379959] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.404306] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.409114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.409239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.409736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.409921] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.409941] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.410068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.410556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.411052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.411654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.412794] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.413752] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.414525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.414685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.414824] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.414958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.415592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.415754] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.415785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.415939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.417537] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.417655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.418351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.418874] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.418894] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.419018] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.445200] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.445205] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.445321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.445463] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.447001] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.447048] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.448509] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.472849] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.478051] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.478177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.478671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.478824] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.478844] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.478972] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.479440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.479956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.480559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.481737] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.482832] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.483597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.483757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.483896] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.484032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.484637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.484790] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.484807] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.484933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.486044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.486164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.486864] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.487343] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.487348] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.487464] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.512569] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.512574] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.512716] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.512859] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.514383] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.514415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.516822] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.541165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.545879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.546007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.546502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.546698] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.546717] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.546843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.547313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.547839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.548390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.549523] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.550525] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.551292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.551451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.551612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.551756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.552357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.552522] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.552542] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.552669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.553766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.553891] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.554579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.555055] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.555060] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.555179] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.579200] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.579205] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.579322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.579480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.581002] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.581049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.582407] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.606756] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.612082] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.612209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.612706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.612887] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.612906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.613031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.613518] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.614016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.614622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.615791] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.616850] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.617616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.617775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.617914] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.618049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.618663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.618818] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.618834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.618960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.620069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.620189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.620882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.621363] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.621369] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.621496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.644995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.645000] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.645115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.645257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.646781] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.646827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.648192] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.672535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.677889] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.678019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.678549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.678717] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.678737] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.678862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.679330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.679856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.680407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.681714] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.682805] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.683525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.683685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.683824] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.683960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.684563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.684717] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.684734] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.684860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.685973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.686098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.686797] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.687278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.687283] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.687411] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.713646] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.713651] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.713781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.713924] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.714957] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.715004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.716385] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.740746] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.746132] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.746271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.746779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.746964] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.746984] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.747110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.747595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.748094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.748671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.749827] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.750848] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.751613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.751783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.751919] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.752051] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.752648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.752834] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.752850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.752973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.753663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.753781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.754463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.754938] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.754960] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.755098] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.779724] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.779729] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.779859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.780029] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.781550] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.781596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.782982] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.807323] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.812116] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.812227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.812713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.812866] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.812885] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.813010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.813478] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.813994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.814597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.815761] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.816848] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.817613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.817774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.817914] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.818050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.818654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.818808] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.818824] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.818953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.820024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.820144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.820824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.821303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.821308] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.821427] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.844927] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.844932] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.845064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.845208] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.846727] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.846759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.848185] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.872547] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.877945] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.878128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.878655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.878824] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.878845] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.878971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.879455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.879967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.880558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.881697] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.882791] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.883525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.883685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.883825] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.883961] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.884565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.884719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.884735] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.884861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.885966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.886091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.886792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.887270] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.887276] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.887394] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.910856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.910861] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.910981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.911128] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.912162] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.912210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.913507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.937855] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.943607] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.943745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.944219] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.944368] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.944389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.944577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.945102] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.945627] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.946177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.947343] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.948445] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.949057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.949215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.949354] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.949508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.950115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.950261] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.950278] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.950407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.951528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.951650] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.952344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.952838] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.952845] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.952972] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.976976] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.976982] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.977097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.977240] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.978757] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.978816] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.980186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.004533] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.009885] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.010017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.010545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.010714] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.010733] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.010871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.011356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.011871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.012432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.013712] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.014804] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.015526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.015696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.015832] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.015964] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.016571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.016720] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.016736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.016861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.017960] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.018155] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.019355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.019938] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.019945] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.020127] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.046308] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.046313] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.046431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.046661] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.047692] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.047737] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.049105] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.073443] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.078255] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.078371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.078875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.079054] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.079074] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.079202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.079721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.080206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.080781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.081851] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.082944] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.083688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.083850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.083989] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.084124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.084727] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.084882] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.084898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.085024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.086124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.086244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.086936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.087422] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.087428] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.087558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.110541] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.110546] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.110664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.110810] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.112316] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.112348] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.114804] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.139148] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.144450] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.144643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.145133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.145282] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.145302] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.145432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.145971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.146474] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.147058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.148183] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.149227] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.149991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.150150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.150291] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.150426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.151045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.151195] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.151212] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.151340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.152462] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.152592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.153290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.153798] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.153804] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.153931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.178472] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.178477] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.178651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.178838] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.179885] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.179907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.181158] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.205533] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.210309] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.210429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.210947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.211137] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.211157] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.211285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.211808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.212290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.212857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.213983] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.215077] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.215851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.216011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.216149] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.216285] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.216903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.217052] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.217069] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.217193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.218302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.218421] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.219153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.219646] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.219653] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.219807] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.244995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.245000] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.245114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.245257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.246754] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.246800] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.248159] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.272516] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.277937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.278070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.278588] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.278787] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.278807] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.278932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.279401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.279917] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.280502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.281683] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.282776] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.283524] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.283685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.283824] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.283960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.284573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.284728] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.284744] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.284870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.285983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.286105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.286793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.287266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.287272] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.287388] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.312492] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.312497] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.312644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.312787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.314291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.314324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.316806] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.341159] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.345862] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.345990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.346465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.346662] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.346689] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.346830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.347300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.347842] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.348377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.349521] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.350524] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.351288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.351449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.351619] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.351758] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.352354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.352525] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.352559] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.352683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.353782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.353939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.354640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.355119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.355124] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.355265] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.380392] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.380396] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.380575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.380758] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.382257] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.382303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.383505] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.407855] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.413084] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.413212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.413709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.413900] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.413919] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.414047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.414532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.415030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.415629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.416795] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.417849] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.418616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.418776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.418915] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.419052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.419655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.419809] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.419826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.419952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.421022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.421142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.421823] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.422301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.422306] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.422436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.447539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.447543] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.447692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.447834] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.449353] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.449386] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.450537] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.474941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.480293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.480422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.480999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.481153] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.481174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.481327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.481829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.482321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.482917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.484057] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.485147] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.485895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.486055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.486194] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.486329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.486946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.487095] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.487111] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.487237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.488345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.488465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.489180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.489687] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.489694] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.489816] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.517731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.517748] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.517865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.518008] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.519556] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.519579] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.520995] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.545338] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.550117] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.550241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.550741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.550931] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.550952] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.551077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.551567] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.552073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.552662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.553799] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.554848] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.555611] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.555782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.555948] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.556079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.556680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.556866] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.556883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.557006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.558114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.558230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.558921] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.559406] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.559411] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.559538] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.584199] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.584204] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.584320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.584463] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.585968] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.586014] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.587404] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.611751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.616481] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.616620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.617102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.617254] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.617275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.617410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.617934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.618443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.619038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.620222] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.621344] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.622110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.622270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.622409] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.622565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.623173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.623319] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.623335] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.623464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.624604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.624724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.625426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.625909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.625916] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.626042] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.650116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.650120] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.650239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.650381] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.651877] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.651924] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.653336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.677707] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.683099] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.683227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.683726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.683908] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.683927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.684055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.684540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.685040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.685644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.686808] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.687848] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.688613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.688774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.688914] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.689049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.689652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.689806] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.689823] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.689948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.691056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.691175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.691876] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.692354] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.692359] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.692475] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.717585] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.717592] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.717764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.717915] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.718987] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.719014] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.720401] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.744772] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.749509] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.749635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.750116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.750268] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.750289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.750421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.750923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.751433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.752027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.753180] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.754228] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.754994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.755154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.755293] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.755429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.756049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.756199] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.756215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.756341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.757460] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.757590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.758288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.758797] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.758804] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.758935] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.784108] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.784113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.784228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.784371] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.785873] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.785920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.787348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.811720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.817147] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.817299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.817798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.817984] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.818004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.818132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.818618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.819116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.819693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.820853] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.821949] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.822524] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.822685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.822824] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.822960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.823562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.823715] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.823732] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.823860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.824962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.825089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.825782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.826256] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.826261] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.826377] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.850976] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.850981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.851109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.851253] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.852749] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.852796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.854185] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.878524] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.883412] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.883554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.884034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.884185] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.884206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.884341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.884824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.885334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.885955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.887126] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.888230] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.888996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.889158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.889297] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.889434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.890053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.890203] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.890219] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.890345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.891479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.891608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.892304] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.892811] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.892819] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.892956] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.916978] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.916983] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.917101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.917245] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.918748] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.918795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.920185] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.944525] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.949871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.950003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.950509] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.950693] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.950713] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.950838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.951306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.951831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.952383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.953689] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.954782] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.955523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.955683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.955822] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.955957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.956573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.956722] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.956738] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.956863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.958490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.958607] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.959785] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.960315] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.960335] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.960454] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.986748] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.986752] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.986871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.987014] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.988527] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.988563] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.989955] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.014291] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.019121] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.019233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.019722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.019907] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.019927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.020054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.020554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.021037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.021628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.022809] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.023849] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.024613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.024775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.024915] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.025052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.025657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.025809] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.025826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.025952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.027023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.027142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.027828] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.028299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.028304] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.028420] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.054090] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.054095] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.054211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.054354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.055856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.055903] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.057332] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.081698] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.086455] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.086590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.087075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.087219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.087239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.087400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.087941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.088424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.089011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.090218] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.091020] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.091796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.091959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.092099] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.092235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.092845] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.092989] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.093007] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.093133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.094228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.094358] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.095051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.095562] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.095569] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.095717] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.121437] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.121442] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.121599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.121794] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.123346] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.123380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.125822] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.150212] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.155407] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.155536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.156018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.156159] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.156178] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.156299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.156820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.157310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.157915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.159057] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.160147] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.160896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.161057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.161197] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.161334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.161949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.162129] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.162145] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.162271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.163374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.163500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.164192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.164689] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.164696] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.164850] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.191632] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.191637] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.191767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.191910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.193414] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.193446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.195823] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.220161] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.225419] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.225557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.226029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.226221] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.226258] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.226395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.226920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.227415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.228009] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.229153] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.230236] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.230876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.231041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.231180] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.231315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.231940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.232147] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.232162] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.232285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.233394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.233534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.234255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.235264] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.235287] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.235412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.261629] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.261634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.261754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.261900] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.263417] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.263448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.265848] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.290248] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.295660] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.295916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.296661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.297048] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.297093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.297419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.298161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.298845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.299576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.300826] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.301648] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.302281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.302741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.303097] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.303440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.304164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.304428] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.304455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.304701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.305947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.306165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.307406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.307963] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.307971] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.308163] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.334919] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.334924] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.335072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.335216] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.336719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.336765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.338160] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.362562] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.367451] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.367603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.368091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.368256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.368278] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.368422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.368931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.369439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.370020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.371237] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.372340] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.373113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.373280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.373427] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.373589] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.374194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.374348] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.374365] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.374521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.375639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.375773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.376466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.376948] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.376956] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.377086] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.400571] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.400576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.400696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.400842] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.402347] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.402379] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.404821] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.429240] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.436679] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.436890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.437513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.437796] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.437828] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.438055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.438663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.439214] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.439810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.440827] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.441557] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.442090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.442363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.442642] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.442890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.443613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.443876] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.443904] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.444127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.445342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.445566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.446346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.446912] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.446924] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.447145] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.471323] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.471328] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.471466] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.471665] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.472686] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.472736] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.474087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.498505] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.503343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.503496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.503997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.504153] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.504174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.504311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.504811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.505305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.505885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.507164] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.508231] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.509004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.509172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.509319] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.509461] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.510092] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.510250] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.510267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.510400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.511539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.511667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.512371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.512855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.512862] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.513002] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.537047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.537052] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.537168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.537514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.538571] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.538604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.540037] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.564385] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.568495] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.568597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.569068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.569212] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.569231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.569355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.569864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.570357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.570939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.572232] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.573328] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.574097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.574258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.574398] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.574554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.575150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.575296] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.575312] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.575441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.576570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.576689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.577388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.577869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.577876] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.578003] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.603110] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.603115] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.603232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.603374] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.604876] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.604923] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.606354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.630719] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.635552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.635677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.636155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.636308] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.636328] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.636461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.636959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.637468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.638063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.639250] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.640341] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.641105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.641265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.641403] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.641574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.642176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.642319] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.642335] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.642457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.644129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.644247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.645406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.645969] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.645974] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.646130] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.669575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.669580] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.669698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.669843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.671349] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.671381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.673860] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.698197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.703432] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.703572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.704060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.704209] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.704229] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.704359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.704896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.705387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.705972] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.707105] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.708218] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.708982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.709143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.709282] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.709416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.710024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.710175] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.710192] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.710320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.711401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.711530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.712218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.712714] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.712721] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.712850] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.736380] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.736385] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.736531] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.736715] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.737735] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.737795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.739228] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.763565] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.768386] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.768514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.768993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.769146] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.769166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.769300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.769785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.770292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.770898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.772074] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.772856] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.773622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.773782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.773921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.774055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.774657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.774812] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.774829] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.774954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.776065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.776184] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.776887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.777367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.777372] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.777501] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.802125] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.802129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.802244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.802387] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.803882] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.803928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.805342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.829700] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.835696] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.835832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.836334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.836494] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.836535] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.836703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.837173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.837707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.838249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.839370] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.840337] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.841100] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.841260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.841400] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.841566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.842159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.842301] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.842317] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.842442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.844052] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.844169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.844857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.845346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.845352] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.845466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.871163] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.871168] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.871283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.871426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.872478] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.872540] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.873916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.898271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.903062] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.903197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.903694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.903875] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.903895] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.904049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.904575] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.905046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.905644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.906769] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.907849] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.908615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.908777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.908917] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.909054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.909659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.909813] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.909829] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.909955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.911016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.911135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.911827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.912295] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.912300] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.912416] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.936490] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.936495] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.936624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.936766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.937817] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.937840] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.939192] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.963535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.968347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.968469] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.968970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.969119] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.969154] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.969320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.969801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.970316] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.970882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.972016] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.973105] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.973889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.974050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.974189] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.974324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.974928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.975082] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.975098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.975225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.976323] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.976445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.977159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.977664] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.977671] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.977800] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.000725] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.000730] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.000857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.001003] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.002518] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.002550] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.003929] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.028307] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.032525] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.032636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.033108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.033252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.033273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.033399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.033887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.034406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.034964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.036083] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.037196] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.037897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.038059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.038199] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.038334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.038937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.039090] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.039106] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.039232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.040335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.040456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.041166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.041676] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.041683] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.041809] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.068585] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.068590] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.068722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.068864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.070405] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.070428] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.072841] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.097197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.102430] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.102607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.103096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.103245] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.103265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.103396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.103934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.104438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.105020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.106160] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.107225] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.107990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.108149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.108289] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.108425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.109034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.109187] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.109204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.109333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.110445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.110577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.111277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.111781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.111788] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.111916] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.135926] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.135931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.136062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.136205] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.137727] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.137787] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.139185] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.163533] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.168349] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.168469] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.168972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.169192] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.169225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.169352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.169864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.170351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.170932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.172228] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.173324] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.174060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.174220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.174360] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.174512] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.175110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.175255] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.175272] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.175400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.176520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.176639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.177339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.177842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.177849] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.177978] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.202580] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.202597] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.202715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.202858] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.204364] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.204396] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.206807] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.231149] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.235871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.235998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.236477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.236674] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.236701] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.236841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.237309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.237851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.238397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.239679] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.240769] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.241524] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.241683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.241823] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.241958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.242572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.242727] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.242743] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.242869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.243971] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.244097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.244802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.245280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.245285] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.245403] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.271087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.271091] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.271207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.271349] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.272935] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.272966] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.274358] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.298757] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.303611] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.303745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.304224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.304378] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.304398] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.304579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.305106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.305662] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.306177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.307301] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.308389] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.309143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.309304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.309444] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.309596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.310194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.310339] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.310355] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.310496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.311610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.311735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.312423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.312908] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.312916] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.313040] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.338148] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.338153] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.338270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.338413] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.339471] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.339521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.340948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.365336] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.369920] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.370086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.370585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.370779] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.370800] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.370927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.371411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.371923] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.372473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.373812] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.374847] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.375624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.375781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.375917] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.376049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.376647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.376836] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.376851] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.376976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.378034] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.378158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.379362] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.379874] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.379879] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.379994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.407292] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.407296] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.407413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.407638] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.409195] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.409239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.410532] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.434896] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.439646] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.439780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.440287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.440440] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.440462] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.440679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.441190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.441737] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.442250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.443382] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.444477] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.445110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.445273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.445412] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.445578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.446172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.446314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.446331] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.446456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.448131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.448250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.449429] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.449981] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.449986] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.450120] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.475789] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.475794] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.475932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.476075] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.477621] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.477669] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.479090] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.503473] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.508246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.508364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.508864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.509012] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.509031] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.509187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.509714] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.510183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.510778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.511850] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.512941] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.513688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.513847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.513987] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.514122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.514725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.514878] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.514895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.515024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.516134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.516255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.516941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.517417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.517422] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.517553] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.542136] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.542142] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.542261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.542407] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.543944] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.543975] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.545364] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.569755] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.575080] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.575208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.575723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.575919] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.575938] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.576063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.576573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.577047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.577667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.578806] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.579766] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.580525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.580685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.580825] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.580961] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.581575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.581766] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.581782] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.581905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.583047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.583164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.583864] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.584354] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.584359] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.584472] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.611213] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.611218] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.611335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.611478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.613080] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.613112] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.614507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.638889] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.643614] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.643743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.644222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.644374] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.644394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.644548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.645058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.645584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.646144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.647396] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.648515] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.649280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.649440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.649601] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.649744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.650344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.650506] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.650530] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.650657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.651762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.651888] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.652590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.653072] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.653077] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.653193] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.680475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.680491] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.680675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.680830] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.682354] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.682381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.684831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.709173] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.713859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.713988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.714467] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.714660] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.714700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.714833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.715318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.715843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.716380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.717520] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.718526] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.719289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.719450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.719609] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.719753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.720340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.720496] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.720520] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.720655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.721759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.721884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.722581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.723051] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.723056] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.723172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.748260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.748265] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.748380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.748577] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.749600] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.749632] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.751039] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.775420] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.778922] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.779039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.779541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.779696] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.779716] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.779844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.780316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.780844] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.781392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.782522] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.783526] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.784290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.784450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.784613] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.784756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.785355] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.785520] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.785540] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.785667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.786772] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.786899] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.787621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.788077] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.788082] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.788198] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.811727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.811732] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.811852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.811998] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.813559] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.813604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.814992] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.839324] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.843887] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.844019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.844541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.844710] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.844730] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.844856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.845336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.845864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.846401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.847521] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.848526] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.849288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.849450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.849611] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.849754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.850342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.850500] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.850524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.850655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.851755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.851881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.852588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.853065] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.853070] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.853188] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.877208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.877213] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.877331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.877474] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.879081] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.879103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.880514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.904905] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.909671] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.909809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.910288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.910441] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.910461] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.910644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.911143] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.911701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.912214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.913346] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.914442] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.915053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.915215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.915355] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.915519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.916109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.916251] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.916267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.916392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.917556] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.917689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.918382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.918905] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.918912] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.919036] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.946379] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.946383] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.946550] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.946717] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.948252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.948284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.949509] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.973855] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.978517] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.978645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.979124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.979277] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.979297] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.979429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.979925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.980434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.981013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.982106] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.983218] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.983984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.984146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.984286] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.984422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.985051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.985202] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.985218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.985347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.986472] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.986601] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.987302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.987805] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.987813] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.987941] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.011940] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.011945] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.012066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.012212] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.014271] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.014303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.015506] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.039806] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.044499] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.044617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.045096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.045250] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.045271] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.045406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.045904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.046412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.046992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.048087] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.049201] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.049968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.050130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.050271] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.050405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.051029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.051180] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.051196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.051325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.052423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.052550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.053251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.053759] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.053766] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.053894] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.077924] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.077929] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.078059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.078201] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.079719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.079751] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.081218] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.105582] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.110381] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.110510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.110980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.111133] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.111153] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.111287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.111784] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.112279] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.112889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.114018] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.115100] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.115886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.116045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.116184] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.116320] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.116971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.117135] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.117151] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.117275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.118412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.118922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.120159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.120674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.120680] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.120802] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.148139] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.148144] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.148260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.148402] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.149953] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.149998] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.151397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.175789] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.180587] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.180717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.181201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.181358] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.181379] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.181545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.182030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.182554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.183116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.184363] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.185454] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.186242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.186402] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.186560] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.186703] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.187292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.187437] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.187453] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.187600] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.188703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.188830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.189603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.190066] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.190071] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.190187] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.216937] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.216942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.217071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.217214] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.218730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.218762] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.220184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.244569] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.249369] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.249506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.250050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.250224] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.250244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.250386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.250892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.251401] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.251980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.253075] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.254181] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.254897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.255056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.255196] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.255331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.255945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.256099] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.256115] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.256241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.257344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.257466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.258183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.258681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.258688] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.258815] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.282280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.282285] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.282403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.282643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.284208] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.284240] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.285490] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.309861] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.314504] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.314631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.315111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.315264] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.315284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.315420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.315918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.316428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.317008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.318106] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.319221] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.319987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.320148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.320287] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.320422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.321044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.321194] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.321211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.321339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.322459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.322592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.323554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.324035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.324040] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.324157] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.348208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.348213] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.348331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.348474] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.350057] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.350088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.351551] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.375959] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.380723] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.380856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.381338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.381515] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.381543] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.381678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.382151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.382686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.383227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.384317] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.385388] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.386144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.386305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.386445] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.386600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.387199] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.387344] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.387361] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.387502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.388616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.388741] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.389447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.389929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.389936] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.390063] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.413513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.413518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.413667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.413811] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.415315] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.415347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.416506] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.440877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.445637] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.445765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.446243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.446396] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.446416] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.446595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.447090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.447614] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.448177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.449311] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.450386] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.451146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.451317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.451452] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.451634] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.452238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.452379] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.452395] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.452567] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.454173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.454297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.454999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.456027] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.456032] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.456146] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.482369] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.482373] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.482535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.482718] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.484233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.484264] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.485493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.509864] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.514575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.514703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.515182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.515336] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.515357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.515527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.516019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.516561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.517125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.518428] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.519518] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.520281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.520441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.520606] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.520748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.521336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.521495] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.521519] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.521651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.522759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.522886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.523583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.524065] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.524071] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.524187] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.549295] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.549299] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.549414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.549591] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.550642] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.550665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.552063] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.576441] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.581223] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.581341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.581840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.582006] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.582054] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.582195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.582697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.583191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.583757] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.584852] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.585791] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.586523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.586708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.586874] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.587019] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.587615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.587766] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.587782] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.587904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.589005] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.589122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.589836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.590888] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.590907] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.591030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.619454] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.619459] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.619636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.619822] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.621358] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.621389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.623828] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.648169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.653403] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.653584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.654074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.654223] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.654244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.654374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.654914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.655411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.655990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.657104] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.658218] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.658983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.659143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.659283] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.659417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.660027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.660179] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.660195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.660321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.661420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.661548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.662250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.662747] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.662754] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.662882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.689656] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.689662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.689791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.689933] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.690975] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.691007] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.692410] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.716797] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.721610] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.721744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.722224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.722377] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.722398] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.722550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.723034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.723558] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.724120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.725233] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.726354] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.727119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.727281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.727420] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.727573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.728181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.728326] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.728342] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.728471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.729604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.729725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.730430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.730909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.730917] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.731051] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.757263] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.757268] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.757385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.757589] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.758641] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.758688] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.760081] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.784468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.787979] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.788095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.788593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.788745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.788765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.788891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.789358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.789886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.790445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.791805] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.792876] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.793641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.793801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.793941] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.794077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.794681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.794833] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.794850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.794978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.796043] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.796163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.796856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.797324] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.797329] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.797447] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.822021] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.822026] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.822144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.822291] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.823843] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.823874] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.825185] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.849568] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.854966] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.855090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.855587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.855791] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.855811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.855957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.856434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.856950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.857570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.858715] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.859814] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.860596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.860765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.860901] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.861033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.861669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.861834] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.861850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.861975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.863084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.863213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.863941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.864425] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.864430] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.864631] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.891441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.891446] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.891623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.891811] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.893335] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.893366] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.895829] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.920224] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.925420] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.925601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.926091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.926240] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.926261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.926393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.926948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.927424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.928019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.929156] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.930226] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.931018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.931182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.931321] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.931456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.932071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.932219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.932235] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.932357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.933537] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.933670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.934372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.934868] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.934875] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.934999] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.961264] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.961269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.961388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.961584] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.963115] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.963147] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.964532] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.988911] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.993738] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.993866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.994344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.994545] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.994573] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.994724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.995193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.995733] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.996281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.997415] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.998358] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.999123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.999284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.999423] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.999576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.000184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.000328] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.000344] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.000473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.001597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.001717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.002413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.002901] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.002908] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.003033] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.028194] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.028198] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.028313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.028457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.029998] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.030044] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.031439] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.055673] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.060491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.060617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.061097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.061249] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.061269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.061431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.061956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.062465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.063059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.064251] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.065374] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.065847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.066010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.066150] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.066286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.066903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.067126] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.067142] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.067265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.068371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.068514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.069778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.070281] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.070301] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.070428] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.093932] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.093937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.094066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.094210] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.095732] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.095764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.097195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.121575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.126321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.126444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.126949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.127127] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.127148] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.127276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.127804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.128300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.128896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.130018] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.131103] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.131914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.132075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.132216] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.132352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.132959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.133112] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.133128] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.133254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.134353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.134472] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.135190] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.135697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.135705] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.135831] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.160424] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.160429] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.160610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.160793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.162327] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.162359] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.164547] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.188918] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.194135] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.194278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.194783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.194968] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.194989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.195114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.195620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.196126] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.196694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.197819] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.198850] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.199614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.199777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.199917] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.200052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.200657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.200811] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.200828] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.200953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.202063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.202186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.202887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.203369] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.203374] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.203504] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.228607] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.228614] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.228789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.228941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.230460] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.230513] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.232530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.256896] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.261573] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.261701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.262180] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.262332] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.262352] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.262514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.263017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.263543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.264093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.265219] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.266336] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.267103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.267263] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.267403] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.267559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.268167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.268313] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.268329] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.268455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.269575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.269698] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.270399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.270884] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.270891] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.271033] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.297311] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.297316] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.297432] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.297656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.299207] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.299239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.300533] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.324907] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.329552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.329680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.330159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.330311] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.330332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.330528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.331025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.331551] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.332111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.333234] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.334357] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.335122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.335282] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.335421] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.335588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.336192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.336334] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.336350] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.336475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.338156] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.338272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.339445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.339985] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.339990] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.340105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.368553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.368558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.368688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.368829] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.370348] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.370394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.372549] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.396959] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.401597] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.401730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.402210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.402363] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.402384] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.402563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.403048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.403574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.404135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.405234] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.406357] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.407123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.407285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.407425] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.407578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.408188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.408334] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.408350] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.408477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.409606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.409727] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.410426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.410906] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.410914] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.411074] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.436782] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.436800] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.436918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.437062] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.438572] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.438604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.440000] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.464366] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.469291] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.469418] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.469978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.470143] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.470163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.470291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.470792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.471290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.471887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.472984] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.474078] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.474856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.475018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.475159] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.475295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.475902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.476055] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.476071] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.476200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.477311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.477433] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.478140] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.478635] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.478642] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.478812] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.502864] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.502869] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.503002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.503145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.504176] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.504207] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.505550] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.529939] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.534573] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.534700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.535187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.535341] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.535368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.535560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.536039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.536564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.537126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.538226] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.539350] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.540130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.540294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.540435] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.540593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.541188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.541328] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.541344] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.541467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.543096] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.543223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.544432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.544940] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.544945] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.545084] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.571301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.571306] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.571426] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.571585] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.573170] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.573216] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.574505] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.598913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.604070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.604190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.604697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.604883] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.604903] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.605051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.605551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.606036] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.606606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.607742] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.608846] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.609621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.609783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.609922] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.610058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.610657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.610802] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.610819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.610945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.612057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.612191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.612885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.613373] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.613379] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.613531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.639191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.639197] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.639315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.639475] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.641026] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.641071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.642494] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.666877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.671573] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.671702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.672192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.672335] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.672355] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.672516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.673014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.673537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.674088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.675224] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.676028] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.676528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.676697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.676838] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.676974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.677589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.677732] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.677749] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.677874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.678984] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.679100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.679842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.680351] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.680358] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.680537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.706261] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.706266] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.706383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.706586] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.708184] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.708229] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.709511] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.733821] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.740141] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.740278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.740814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.741034] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.741060] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.741243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.741812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.742289] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.742872] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.744016] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.745099] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.745894] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.746121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.746285] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.746420] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.747037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.747180] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.747196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.747322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.748427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.748556] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.749253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.749800] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.749807] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.749992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.776820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.776826] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.776956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.777101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.778634] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.778678] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.780150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.804540] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.810377] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.810554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.811037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.811178] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.811197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.811320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.811847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.812351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.812935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.814131] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.815213] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.815835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.815996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.816136] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.816282] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.816964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.817171] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.817193] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.817376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.818559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.818679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.819378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.819875] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.819880] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.820010] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.847327] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.847333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.847453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.847688] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.849283] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.849327] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.851522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.875817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.880515] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.880627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.881103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.881306] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.881332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.881555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.882099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.882646] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.883180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.884309] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.885381] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.886162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.886396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.886604] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.886781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.887366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.887541] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.887558] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.887697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.888840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.888958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.890142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.890727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.890735] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.890914] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.918878] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.918884] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.919002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.919147] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.920676] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.920721] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.922159] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.946540] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.951342] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.951447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.951970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.952173] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.952199] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.952383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.952991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.953481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.954060] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.955239] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.956032] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.956794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.956971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.957169] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.957360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.958025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.958236] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.958259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.958409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.959543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.959663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.960359] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.960871] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.960877] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.960994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.988899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.988905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.989023] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.989168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.990680] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.990758] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.992171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.016546] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.021338] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.021446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.021987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.022192] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.022218] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.022408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.023016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.023517] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.024076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.025248] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.026367] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.027146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.027380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.027592] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.027792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.028419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.028625] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.028654] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.028778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.029910] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.030027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.030760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.031229] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.031234] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.031409] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.060420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.060425] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.060562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.060821] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.062395] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.062441] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.063911] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.088294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.092971] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.093112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.093666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.093881] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.093908] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.094090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.094628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.095161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.095750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.096848] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.097940] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.098700] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.098925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.099124] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.099311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.099933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.100082] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.100098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.100224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.101327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.101447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.102419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.102904] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.102909] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.103025] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.130362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.130368] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.130521] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.130762] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.132338] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.132384] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.133884] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.158270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.163447] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.163638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.164120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.164260] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.164279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.164401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.164969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.165458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.166041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.167250] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.168339] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.169099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.169259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.169405] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.169610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.170260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.170466] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.170503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.170675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.171785] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.171904] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.172604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.173089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.173094] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.173212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.199395] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.199401] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.199557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.199802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.201373] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.201419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.202895] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.227233] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.232434] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.232630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.233111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.233252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.233272] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.233393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.233966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.234457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.235040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.236248] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.237040] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.237801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.237959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.238099] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.238235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.238845] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.239050] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.239073] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.239261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.240436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.240621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.241317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.241817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.241823] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.241941] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.267094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.267099] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.267219] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.267364] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.268874] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.268949] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.270394] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.294738] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.300653] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.300790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.301257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.301399] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.301417] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.301622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.302165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.302684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.303243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.304408] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.305508] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.306295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.306455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.306673] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.306863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.307517] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.307722] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.307745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.307898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.308649] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.308765] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.309451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.309982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.309987] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.310102] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.336857] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.336862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.336993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.337137] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.338669] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.338713] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.340265] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.364661] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.370027] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.370172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.370681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.370920] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.370945] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.371131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.371689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.372193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.372755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.373851] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.374941] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.375534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.375755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.375906] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.376043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.376659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.376802] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.376818] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.376941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.378533] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.378652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.379350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.379899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.379906] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.380072] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.405781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.405786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.405917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.406061] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.407561] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.407639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.409081] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.433433] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.438288] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.438389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.438922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.439124] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.439150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.439332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.439918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.440425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.441012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.442206] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.443160] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.443890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.444049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.444245] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.444438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.445096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.445305] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.445327] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.445460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.446576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.446697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.447386] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.447876] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.447881] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.447997] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.474808] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.474826] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.474945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.475090] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.476601] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.476646] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.478088] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.502463] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.507811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.507954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.508434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.508675] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.508719] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.508904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.509429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.509953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.510546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.511687] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.512517] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.513274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.513433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.513584] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.513721] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.514371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.514596] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.514619] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.514803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.515969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.516090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.516792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.517275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.517281] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.517396] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.544202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.544208] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.544327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.544471] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.546013] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.546058] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.547496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.571771] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.576516] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.576626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.577102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.577305] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.577330] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.577549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.578097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.578627] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.579178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.580338] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.581429] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.582207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.582432] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.582647] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.582833] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.583440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.583600] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.583617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.583746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.584849] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.584967] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.585672] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.586154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.586159] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.586277] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.612558] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.612577] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.612696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.612840] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.614357] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.614401] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.615906] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.640239] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.645474] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.645694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.646175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.646316] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.646335] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.646456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.646999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.647500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.648057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.649251] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.650045] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.650815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.650985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.651120] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.651253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.651867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.652068] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.652090] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.652272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.653395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.653579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.654781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.655318] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.655324] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.655438] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.682211] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.682216] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.682335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.682481] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.684056] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.684100] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.685541] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.709817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.715127] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.715277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.715827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.716045] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.716071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.716256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.716845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.717332] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.717909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.719015] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.720102] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.720923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.721154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.721338] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.721481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.722123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.722266] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.722282] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.722405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.723607] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.723725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.724419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.724913] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.724919] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.725093] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.753007] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.753016] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.753244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.753398] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.754983] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.755032] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.756532] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.780828] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.785516] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.785627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.786103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.786303] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.786329] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.786546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.787092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.787638] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.788172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.789294] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.790382] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.791159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.791390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.791596] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.791814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.792423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.792630] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.792647] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.792785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.793924] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.794040] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.795205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.795778] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.795797] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.795962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.822810] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.822816] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.822947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.823091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.824625] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.824669] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.826195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.850576] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.855968] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.856125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.856654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.856872] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.856898] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.857081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.857643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.858144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.858721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.859850] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.860939] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.861684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.861897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.862091] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.862282] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.862966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.863160] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.863176] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.863333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.864464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.864593] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.865283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.865812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.865817] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.865946] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.893279] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.893285] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.893404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.893636] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.895228] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.895273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.897817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.922159] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.927446] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.927638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.928120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.928261] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.928280] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.928404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.928970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.929460] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.930043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.931252] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.932368] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.932974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.933134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.933273] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.933407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.934013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.934222] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.934244] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.934433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.935629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.935765] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.936446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.936928] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.936933] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.937050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.961634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.961640] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.961762] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.961910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.963428] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.963473] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.965007] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.989352] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.993898] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.994029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.994546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.994762] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.994788] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.994969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.995508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.996022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.996619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.997847] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.998935] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.999701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.999928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.000124] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.000282] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.000885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.001031] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.001048] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.001174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.002275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.002395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.003110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.003614] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.003620] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.003783] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.029535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.029541] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.029673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.029817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.031333] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.031377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.032870] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.057235] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.062444] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.062631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.063112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.063254] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.063273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.063395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.063956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.064449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.065032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.066223] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.067016] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.067770] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.067930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.068069] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.068206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.068816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.069003] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.069026] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.069213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.070390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.070581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.071300] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.071809] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.071815] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.071931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.097069] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.097075] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.097194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.097338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.098914] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.098959] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.100409] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.124719] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.130114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.130258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.130813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.131030] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.131055] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.131239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.131806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.132280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.132879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.134019] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.135099] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.135746] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.135970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.136170] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.136362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.137056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.137249] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.137265] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.137391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.138561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.138679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.139367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.139897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.139902] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.140031] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.168424] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.168430] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.168566] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.168820] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.170397] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.170443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.171947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.196328] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.200872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.201018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.201511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.201751] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.201777] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.201959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.202500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.203010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.203597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.204727] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.205678] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.206449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.206697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.206906] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.207098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.207766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.207978] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.207997] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.208130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.209269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.209386] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.210107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.210611] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.210617] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.210747] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.238044] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.238051] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.238192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.238344] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.239372] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.239422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.241831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.266192] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.270873] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.271020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.271509] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.271746] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.271771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.271949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.272475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.272999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.273588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.274751] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.275845] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.276604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.276773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.276910] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.277115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.277769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.278007] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.278029] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.278208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.279320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.279440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.280124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.280670] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.280675] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.280805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.308110] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.308116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.308235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.308380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.309913] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.309958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.311409] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.335720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.340575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.340687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.341162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.341347] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.341375] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.341579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.342110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.342634] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.343194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.344438] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.345517] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.346294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.346531] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.346725] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.346869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.347470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.347633] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.347650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.347776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.348889] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.349008] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.349702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.350182] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.350188] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.350303] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.377610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.377616] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.377761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.377906] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.379423] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.379466] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.380961] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.405324] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.410445] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.410632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.411114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.411254] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.411273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.411395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.411966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.412458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.413041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.414250] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.415211] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.415836] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.415995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.416134] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.416269] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.416916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.417124] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.417147] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.417328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.418548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.418689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.419408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.419923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.419928] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.420044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.447958] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.447963] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.448086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.448231] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.449742] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.449815] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.451192] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.475532] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.480381] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.480497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.481014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.481158] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.481178] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.481305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.481784] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.482289] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.482860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.484017] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.485100] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.485757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.485915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.486055] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.486191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.486801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.486979] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.486995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.487120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.488227] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.488345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.489037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.489571] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.489576] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.489692] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.515958] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.515962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.516077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.516218] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.517709] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.517737] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.519095] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.543498] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.547524] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.547664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.548140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.548288] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.548309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.548441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.548960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.549442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.550018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.551168] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.552245] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.553008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.553167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.553307] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.553441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.554041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.554185] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.554201] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.554327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.555439] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.555569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.556271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.556772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.556778] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.556895] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.585365] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.585370] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.585502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.585695] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.587184] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.587215] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.588491] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.612888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.618170] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.618294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.618788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.618940] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.618961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.619089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.619651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.620109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.620674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.621858] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.622952] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.623684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.623847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.623987] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.624122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.624722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.624869] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.624888] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.625015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.626113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.626232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.626935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.627416] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.627421] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.627548] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.653252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.653257] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.653384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.653549] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.655069] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.655105] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.656478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.680880] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.685545] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.685696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.686227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.686428] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.686455] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.686650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.687219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.687766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.688300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.689480] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.690456] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.691229] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.691389] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.691554] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.691723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.692308] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.692448] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.692464] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.692602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.693785] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.693901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.694640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.695092] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.695097] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.695210] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.720326] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.720330] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.720446] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.720611] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.722139] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.722168] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.723520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.747866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.755756] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.755944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.756549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.756807] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.756839] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.757062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.757659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.758199] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.758786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.760089] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.760814] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.761349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.761640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.761882] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.762117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.762821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.763072] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.763099] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.763324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.764561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.764767] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.765552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.766092] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.766100] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.766303] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.790459] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.790463] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.790598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.790752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.791755] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.791786] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.793186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.817552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.822336] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.822429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.822972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.823130] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.823149] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.823276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.823759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.824259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.824845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.825975] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.827071] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.827841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.827999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.828139] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.828274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.828874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.829019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.829035] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.829163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.830263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.830382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.831089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.831584] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.831590] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.831706] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.857960] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.857978] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.858091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.858232] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.859253] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.859282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.860506] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.884907] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.889578] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.889725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.890200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.890350] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.890370] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.890511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.891033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.891558] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.892110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.893252] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.894047] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.894824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.894993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.895130] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.895262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.895853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.896031] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.896046] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.896169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.897266] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.897384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.898072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.898606] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.898611] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.898725] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.925473] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.925477] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.925602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.925793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.926827] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.926863] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.928208] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.952589] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.956642] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.956787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.957263] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.957413] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.957434] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.957591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.958100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.958622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.959176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.960301] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.961389] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.962054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.962212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.962352] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.962500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.963088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.963233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.963249] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.963374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.964497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.964617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.965305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.965797] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.965802] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.965919] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.992168] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.992172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.992285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.992428] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.994034] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.994068] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.999156] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.023549] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.029123] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.029240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.029749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.029960] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.029980] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.030107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.030630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.031098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.031667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.032852] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.033950] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.034689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.034848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.034987] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.035122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.035734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.035899] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.035915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.036038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.037091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.037210] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.037942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.038399] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.038406] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.038553] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.063224] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.063229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.063344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.063496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.065070] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.065116] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.066495] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.090877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.095768] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.095927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.096404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.096581] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.096620] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.096793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.097263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.097787] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.098351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.099520] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.100471] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.101118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.101278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.101417] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.101579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.102186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.102329] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.102344] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.102467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.103615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.103733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.104712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.105167] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.105174] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.105310] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.130995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.131001] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.131161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.131364] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.132938] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.132983] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.134389] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.158797] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.164089] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.164207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.164708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.164891] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.164911] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.165045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.165550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.166037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.166606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.167765] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.168845] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.169609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.169768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.169908] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.170042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.170641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.170786] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.170802] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.170930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.172033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.172155] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.173137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.173642] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.173648] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.173767] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.198384] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.198391] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.198597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.198848] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.200420] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.200465] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.201995] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.226386] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.229911] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.230029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.230517] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.230703] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.230723] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.230857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.231332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.231858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.232410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.233685] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.234777] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.235518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.235687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.235823] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.235956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.236547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.236724] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.236740] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.236861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.237958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.238075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.239059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.239566] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.239572] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.239701] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.265928] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.265935] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.266116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.266319] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.267928] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.267972] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.269193] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.293580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.298904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.299063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.299564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.299749] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.299770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.299903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.300379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.300907] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.301456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.302785] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.303846] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.304609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.304768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.304907] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.305043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.305638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.305785] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.305800] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.305926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.307026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.307145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.307848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.308348] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.308354] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.308473] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.335850] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.335858] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.336027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.336228] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.337802] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.337833] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.339184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.363583] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.368927] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.369087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.369589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.369775] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.369795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.369928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.370406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.370939] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.371491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.372523] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.373520] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.374281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.374440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.374590] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.374726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.375313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.375457] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.375473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.375609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.376702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.376821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.377519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.378015] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.378020] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.378136] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.406577] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.406585] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.406751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.406923] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.408474] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.408531] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.409922] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.434327] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.438923] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.439082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.439582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.439776] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.439797] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.439932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.440407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.440937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.441493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.442523] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.443519] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.444280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.444439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.444590] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.444724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.445311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.445455] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.445471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.445608] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.446700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.446819] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.447513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.448015] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.448020] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.448136] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.475976] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.475981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.476099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.476243] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.477740] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.477771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.479113] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.503542] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.508863] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.509024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.509523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.509708] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.509729] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.509864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.510342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.510865] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.511418] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.512692] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.513783] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.514518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.514676] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.514815] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.514951] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.515547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.515712] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.515733] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.515921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.516680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.516858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.517616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.518128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.518135] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.518265] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.544549] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.544554] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.544682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.544826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.546336] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.546367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.548491] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.572902] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.577746] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.577905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.578382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.578559] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.578598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.578746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.579223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.579747] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.580310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.581528] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.582521] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.583280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.583439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.583592] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.583729] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.584317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.584462] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.584478] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.584616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.585717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.585839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.586536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.587039] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.587044] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.587164] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.614496] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.614501] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.614644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.614787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.616285] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.616332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.617491] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.641924] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.647176] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.647333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.647882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.648088] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.648114] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.648286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.648830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.649314] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.649873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.651016] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.652101] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.652891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.653051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.653190] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.653325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.653928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.654108] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.654125] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.654251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.655333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.655453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.656160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.656657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.656663] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.656809] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.681413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.681418] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.681567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.681750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.682792] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.682837] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.684181] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.708580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.714024] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.714160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.714653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.714829] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.714848] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.714973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.715440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.715971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.716555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.717684] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.718772] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.719516] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.719674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.719813] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.719948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.720551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.720696] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.720712] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.720839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.721918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.722037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.722733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.723236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.723241] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.723358] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.747902] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.747906] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.748048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.748190] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.749219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.749248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.750506] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.774887] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.779666] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.779798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.780264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.780405] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.780424] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.780559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.781072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.781616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.782149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.783425] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.784518] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.785280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.785438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.785597] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.785731] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.786315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.786455] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.786470] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.786602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.788170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.788286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.788986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.789461] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.789466] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.789586] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.815318] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.815322] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.815435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.815605] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.816652] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.816681] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.818049] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.842453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.846583] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.846723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.847200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.847350] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.847370] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.847512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.848035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.848557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.849111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.850254] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.851048] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.851816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.851975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.852114] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.852249] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.852848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.852993] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.853009] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.853137] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.854239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.854361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.855082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.855582] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.855587] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.855704] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.881934] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.881939] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.882067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.882209] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.883238] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.883268] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.884519] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.908935] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.913587] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.913733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.914209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.914359] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.914379] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.914523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.915046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.915570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.916122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.917225] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.918317] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.919056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.919215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.919354] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.919502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.920090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.920235] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.920250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.920377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.921460] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.921589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.922281] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.922799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.922804] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.922921] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.951298] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.951306] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.951474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.951758] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.953341] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.953378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.955552] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.979960] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.985105] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.985263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.985831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.986048] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.986074] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.986253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.986798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.987290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.987854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.988975] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.990070] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.990925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.991088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.991229] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.991364] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.991978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.992121] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.992137] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.992259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.994409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.994536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.995218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.995773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.995780] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.995961] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.022838] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.022843] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.022963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.023107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.024640] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.024684] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.026095] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.050454] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.055293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.055395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.055910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.056108] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.056134] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.056316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.056893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.057393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.057991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.059148] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.060264] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.060890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.061053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.061249] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.061444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.062118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.062317] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.062334] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.062463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.063648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.063765] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.064723] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.065787] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.065792] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.065922] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.093219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.093225] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.093343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.093517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.095128] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.095173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.096511] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.120822] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.125509] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.125621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.126097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.126298] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.126324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.126544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.127093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.127637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.128172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.129324] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.130086] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.130857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.131030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.131230] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.131423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.132113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.132330] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.132353] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.132539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.133633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.133750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.134438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.134966] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.134971] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.135100] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.161280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.161285] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.161402] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.161607] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.163197] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.163241] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.164510] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.188818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.195137] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.195272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.195802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.196019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.196046] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.196225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.196787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.197274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.197862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.199103] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.199902] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.200663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.200892] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.201084] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.201270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.201927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.202109] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.202126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.202259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.203379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.203506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.204215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.205234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.205239] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.205353] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.233212] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.233217] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.233334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.233478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.235022] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.235066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.236493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.260830] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.265510] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.265620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.266097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.266297] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.266324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.266544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.267089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.267607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.268171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.269291] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.270084] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.270855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.271015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.271155] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.271289] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.271977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.272198] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.272220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.272406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.273574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.273708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.274395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.274907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.274912] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.275026] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <6> [190.284813] [IGT] i915_pm_rpm: exiting, ret=77 <7> [190.301268] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.301274] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.301412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.301866] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.301890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.302019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.302497] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.302714] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.302730] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.302881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.303378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.303882] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.304442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.305754] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.306847] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.307610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.307778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.307913] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.308046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.308698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.308871] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.308886] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.309012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.310112] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.310230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.310970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.311997] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.312002] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.312145] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

Created at 2023-08-20 22:43:00